linux/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * NEC NL8048HL11 Panel driver
   4 *
   5 * Copyright (C) 2010 Texas Instruments Inc.
   6 * Author: Erik Gilling <konkers@android.com>
   7 * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/delay.h>
  12#include <linux/spi/spi.h>
  13#include <linux/fb.h>
  14#include <linux/gpio.h>
  15#include <linux/of_gpio.h>
  16
  17#include <video/omapfb_dss.h>
  18
  19struct panel_drv_data {
  20        struct omap_dss_device  dssdev;
  21        struct omap_dss_device *in;
  22
  23        struct omap_video_timings videomode;
  24
  25        int data_lines;
  26
  27        int res_gpio;
  28        int qvga_gpio;
  29
  30        struct spi_device *spi;
  31};
  32
  33#define LCD_XRES                800
  34#define LCD_YRES                480
  35/*
  36 * NEC PIX Clock Ratings
  37 * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
  38 */
  39#define LCD_PIXEL_CLOCK         23800000
  40
  41static const struct {
  42        unsigned char addr;
  43        unsigned char dat;
  44} nec_8048_init_seq[] = {
  45        { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
  46        { 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
  47        { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
  48        { 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
  49        { 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
  50        { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
  51        { 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
  52        { 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
  53        { 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
  54        { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
  55        { 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
  56        { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
  57        { 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
  58        { 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
  59        { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
  60        { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
  61        { 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
  62        { 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
  63};
  64
  65static const struct omap_video_timings nec_8048_panel_timings = {
  66        .x_res          = LCD_XRES,
  67        .y_res          = LCD_YRES,
  68        .pixelclock     = LCD_PIXEL_CLOCK,
  69        .hfp            = 6,
  70        .hsw            = 1,
  71        .hbp            = 4,
  72        .vfp            = 3,
  73        .vsw            = 1,
  74        .vbp            = 4,
  75
  76        .vsync_level    = OMAPDSS_SIG_ACTIVE_LOW,
  77        .hsync_level    = OMAPDSS_SIG_ACTIVE_LOW,
  78        .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
  79        .de_level       = OMAPDSS_SIG_ACTIVE_HIGH,
  80        .sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
  81};
  82
  83#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
  84
  85static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
  86                        unsigned char reg_data)
  87{
  88        int ret = 0;
  89        unsigned int cmd = 0, data = 0;
  90
  91        cmd = 0x0000 | reg_addr; /* register address write */
  92        data = 0x0100 | reg_data; /* register data write */
  93        data = (cmd << 16) | data;
  94
  95        ret = spi_write(spi, (unsigned char *)&data, 4);
  96        if (ret)
  97                pr_err("error in spi_write %x\n", data);
  98
  99        return ret;
 100}
 101
 102static int init_nec_8048_wvga_lcd(struct spi_device *spi)
 103{
 104        unsigned int i;
 105        /* Initialization Sequence */
 106        /* nec_8048_spi_send(spi, REG, VAL) */
 107        for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
 108                nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
 109                                nec_8048_init_seq[i].dat);
 110        udelay(20);
 111        nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
 112                                nec_8048_init_seq[i].dat);
 113        return 0;
 114}
 115
 116static int nec_8048_connect(struct omap_dss_device *dssdev)
 117{
 118        struct panel_drv_data *ddata = to_panel_data(dssdev);
 119        struct omap_dss_device *in = ddata->in;
 120        int r;
 121
 122        if (omapdss_device_is_connected(dssdev))
 123                return 0;
 124
 125        r = in->ops.dpi->connect(in, dssdev);
 126        if (r)
 127                return r;
 128
 129        return 0;
 130}
 131
 132static void nec_8048_disconnect(struct omap_dss_device *dssdev)
 133{
 134        struct panel_drv_data *ddata = to_panel_data(dssdev);
 135        struct omap_dss_device *in = ddata->in;
 136
 137        if (!omapdss_device_is_connected(dssdev))
 138                return;
 139
 140        in->ops.dpi->disconnect(in, dssdev);
 141}
 142
 143static int nec_8048_enable(struct omap_dss_device *dssdev)
 144{
 145        struct panel_drv_data *ddata = to_panel_data(dssdev);
 146        struct omap_dss_device *in = ddata->in;
 147        int r;
 148
 149        if (!omapdss_device_is_connected(dssdev))
 150                return -ENODEV;
 151
 152        if (omapdss_device_is_enabled(dssdev))
 153                return 0;
 154
 155        if (ddata->data_lines)
 156                in->ops.dpi->set_data_lines(in, ddata->data_lines);
 157        in->ops.dpi->set_timings(in, &ddata->videomode);
 158
 159        r = in->ops.dpi->enable(in);
 160        if (r)
 161                return r;
 162
 163        if (gpio_is_valid(ddata->res_gpio))
 164                gpio_set_value_cansleep(ddata->res_gpio, 1);
 165
 166        dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 167
 168        return 0;
 169}
 170
 171static void nec_8048_disable(struct omap_dss_device *dssdev)
 172{
 173        struct panel_drv_data *ddata = to_panel_data(dssdev);
 174        struct omap_dss_device *in = ddata->in;
 175
 176        if (!omapdss_device_is_enabled(dssdev))
 177                return;
 178
 179        if (gpio_is_valid(ddata->res_gpio))
 180                gpio_set_value_cansleep(ddata->res_gpio, 0);
 181
 182        in->ops.dpi->disable(in);
 183
 184        dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 185}
 186
 187static void nec_8048_set_timings(struct omap_dss_device *dssdev,
 188                struct omap_video_timings *timings)
 189{
 190        struct panel_drv_data *ddata = to_panel_data(dssdev);
 191        struct omap_dss_device *in = ddata->in;
 192
 193        ddata->videomode = *timings;
 194        dssdev->panel.timings = *timings;
 195
 196        in->ops.dpi->set_timings(in, timings);
 197}
 198
 199static void nec_8048_get_timings(struct omap_dss_device *dssdev,
 200                struct omap_video_timings *timings)
 201{
 202        struct panel_drv_data *ddata = to_panel_data(dssdev);
 203
 204        *timings = ddata->videomode;
 205}
 206
 207static int nec_8048_check_timings(struct omap_dss_device *dssdev,
 208                struct omap_video_timings *timings)
 209{
 210        struct panel_drv_data *ddata = to_panel_data(dssdev);
 211        struct omap_dss_device *in = ddata->in;
 212
 213        return in->ops.dpi->check_timings(in, timings);
 214}
 215
 216static struct omap_dss_driver nec_8048_ops = {
 217        .connect        = nec_8048_connect,
 218        .disconnect     = nec_8048_disconnect,
 219
 220        .enable         = nec_8048_enable,
 221        .disable        = nec_8048_disable,
 222
 223        .set_timings    = nec_8048_set_timings,
 224        .get_timings    = nec_8048_get_timings,
 225        .check_timings  = nec_8048_check_timings,
 226
 227        .get_resolution = omapdss_default_get_resolution,
 228};
 229
 230
 231static int nec_8048_probe_of(struct spi_device *spi)
 232{
 233        struct device_node *node = spi->dev.of_node;
 234        struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 235        struct omap_dss_device *in;
 236        int gpio;
 237
 238        gpio = of_get_named_gpio(node, "reset-gpios", 0);
 239        if (!gpio_is_valid(gpio)) {
 240                dev_err(&spi->dev, "failed to parse enable gpio\n");
 241                return gpio;
 242        }
 243        ddata->res_gpio = gpio;
 244
 245        /* XXX the panel spec doesn't mention any QVGA pin?? */
 246        ddata->qvga_gpio = -ENOENT;
 247
 248        in = omapdss_of_find_source_for_first_ep(node);
 249        if (IS_ERR(in)) {
 250                dev_err(&spi->dev, "failed to find video source\n");
 251                return PTR_ERR(in);
 252        }
 253
 254        ddata->in = in;
 255
 256        return 0;
 257}
 258
 259static int nec_8048_probe(struct spi_device *spi)
 260{
 261        struct panel_drv_data *ddata;
 262        struct omap_dss_device *dssdev;
 263        int r;
 264
 265        dev_dbg(&spi->dev, "%s\n", __func__);
 266
 267        if (!spi->dev.of_node)
 268                return -ENODEV;
 269
 270        spi->mode = SPI_MODE_0;
 271        spi->bits_per_word = 32;
 272
 273        r = spi_setup(spi);
 274        if (r < 0) {
 275                dev_err(&spi->dev, "spi_setup failed: %d\n", r);
 276                return r;
 277        }
 278
 279        init_nec_8048_wvga_lcd(spi);
 280
 281        ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
 282        if (ddata == NULL)
 283                return -ENOMEM;
 284
 285        dev_set_drvdata(&spi->dev, ddata);
 286
 287        ddata->spi = spi;
 288
 289        r = nec_8048_probe_of(spi);
 290        if (r)
 291                return r;
 292
 293        if (gpio_is_valid(ddata->qvga_gpio)) {
 294                r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
 295                                GPIOF_OUT_INIT_HIGH, "lcd QVGA");
 296                if (r)
 297                        goto err_gpio;
 298        }
 299
 300        if (gpio_is_valid(ddata->res_gpio)) {
 301                r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
 302                                GPIOF_OUT_INIT_LOW, "lcd RES");
 303                if (r)
 304                        goto err_gpio;
 305        }
 306
 307        ddata->videomode = nec_8048_panel_timings;
 308
 309        dssdev = &ddata->dssdev;
 310        dssdev->dev = &spi->dev;
 311        dssdev->driver = &nec_8048_ops;
 312        dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 313        dssdev->owner = THIS_MODULE;
 314        dssdev->panel.timings = ddata->videomode;
 315
 316        r = omapdss_register_display(dssdev);
 317        if (r) {
 318                dev_err(&spi->dev, "Failed to register panel\n");
 319                goto err_reg;
 320        }
 321
 322        return 0;
 323
 324err_reg:
 325err_gpio:
 326        omap_dss_put_device(ddata->in);
 327        return r;
 328}
 329
 330static int nec_8048_remove(struct spi_device *spi)
 331{
 332        struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 333        struct omap_dss_device *dssdev = &ddata->dssdev;
 334        struct omap_dss_device *in = ddata->in;
 335
 336        dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 337
 338        omapdss_unregister_display(dssdev);
 339
 340        nec_8048_disable(dssdev);
 341        nec_8048_disconnect(dssdev);
 342
 343        omap_dss_put_device(in);
 344
 345        return 0;
 346}
 347
 348#ifdef CONFIG_PM_SLEEP
 349static int nec_8048_suspend(struct device *dev)
 350{
 351        struct spi_device *spi = to_spi_device(dev);
 352
 353        nec_8048_spi_send(spi, 2, 0x01);
 354        mdelay(40);
 355
 356        return 0;
 357}
 358
 359static int nec_8048_resume(struct device *dev)
 360{
 361        struct spi_device *spi = to_spi_device(dev);
 362
 363        /* reinitialize the panel */
 364        spi_setup(spi);
 365        nec_8048_spi_send(spi, 2, 0x00);
 366        init_nec_8048_wvga_lcd(spi);
 367
 368        return 0;
 369}
 370static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
 371                nec_8048_resume);
 372#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
 373#else
 374#define NEC_8048_PM_OPS NULL
 375#endif
 376
 377static const struct of_device_id nec_8048_of_match[] = {
 378        { .compatible = "omapdss,nec,nl8048hl11", },
 379        {},
 380};
 381
 382MODULE_DEVICE_TABLE(of, nec_8048_of_match);
 383
 384static struct spi_driver nec_8048_driver = {
 385        .driver = {
 386                .name   = "panel-nec-nl8048hl11",
 387                .pm     = NEC_8048_PM_OPS,
 388                .of_match_table = nec_8048_of_match,
 389                .suppress_bind_attrs = true,
 390        },
 391        .probe  = nec_8048_probe,
 392        .remove = nec_8048_remove,
 393};
 394
 395module_spi_driver(nec_8048_driver);
 396
 397MODULE_ALIAS("spi:nec,nl8048hl11");
 398MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
 399MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
 400MODULE_LICENSE("GPL");
 401