LXR linux/drivers/net/dsa/Kconfig

   1# SPDX-License-Identifier: GPL-2.0-only
   2menu "Distributed Switch Architecture drivers"
   3        depends on HAVE_NET_DSA
   4
   5source "drivers/net/dsa/b53/Kconfig"
   6
   7config NET_DSA_BCM_SF2
   8        tristate "Broadcom Starfighter 2 Ethernet switch support"
   9        depends on HAS_IOMEM && NET_DSA
  10        select NET_DSA_TAG_BRCM
  11        select FIXED_PHY
  12        select BCM7XXX_PHY
  13        select MDIO_BCM_UNIMAC
  14        select B53
  15        ---help---
  16          This enables support for the Broadcom Starfighter 2 Ethernet
  17          switch chips.
  18
  19config NET_DSA_LOOP
  20        tristate "DSA mock-up Ethernet switch chip support"
  21        depends on NET_DSA
  22        select FIXED_PHY
  23        ---help---
  24          This enables support for a fake mock-up switch chip which
  25          exercises the DSA APIs.
  26
  27config NET_DSA_LANTIQ_GSWIP
  28        tristate "Lantiq / Intel GSWIP"
  29        depends on HAS_IOMEM && NET_DSA
  30        select NET_DSA_TAG_GSWIP
  31        ---help---
  32          This enables support for the Lantiq / Intel GSWIP 2.1 found in
  33          the xrx200 / VR9 SoC.
  34
  35config NET_DSA_MT7530
  36        tristate "Mediatek MT7530 Ethernet switch support"
  37        depends on NET_DSA
  38        select NET_DSA_TAG_MTK
  39        ---help---
  40          This enables support for the Mediatek MT7530 Ethernet switch
  41          chip.
  42
  43config NET_DSA_MV88E6060
  44        tristate "Marvell 88E6060 ethernet switch chip support"
  45        depends on NET_DSA
  46        select NET_DSA_TAG_TRAILER
  47        ---help---
  48          This enables support for the Marvell 88E6060 ethernet switch
  49          chip.
  50
  51source "drivers/net/dsa/microchip/Kconfig"
  52
  53source "drivers/net/dsa/mv88e6xxx/Kconfig"
  54
  55source "drivers/net/dsa/ocelot/Kconfig"
  56
  57source "drivers/net/dsa/qca/Kconfig"
  58
  59source "drivers/net/dsa/sja1105/Kconfig"
  60
  61config NET_DSA_QCA8K
  62        tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
  63        depends on NET_DSA
  64        select NET_DSA_TAG_QCA
  65        select REGMAP
  66        ---help---
  67          This enables support for the Qualcomm Atheros QCA8K Ethernet
  68          switch chips.
  69
  70config NET_DSA_REALTEK_SMI
  71        tristate "Realtek SMI Ethernet switch family support"
  72        depends on NET_DSA
  73        select FIXED_PHY
  74        select IRQ_DOMAIN
  75        select REALTEK_PHY
  76        select REGMAP
  77        ---help---
  78          This enables support for the Realtek SMI-based switch
  79          chips, currently only RTL8366RB.
  80
  81config NET_DSA_SMSC_LAN9303
  82        tristate
  83        select NET_DSA_TAG_LAN9303
  84        select REGMAP
  85        ---help---
  86          This enables support for the SMSC/Microchip LAN9303 3 port ethernet
  87          switch chips.
  88
  89config NET_DSA_SMSC_LAN9303_I2C
  90        tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
  91        depends on NET_DSA && I2C
  92        select NET_DSA_SMSC_LAN9303
  93        select REGMAP_I2C
  94        ---help---
  95          Enable access functions if the SMSC/Microchip LAN9303 is configured
  96          for I2C managed mode.
  97
  98config NET_DSA_SMSC_LAN9303_MDIO
  99        tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
 100        depends on NET_DSA
 101        select NET_DSA_SMSC_LAN9303
 102        ---help---
 103          Enable access functions if the SMSC/Microchip LAN9303 is configured
 104          for MDIO managed mode.
 105
 106config NET_DSA_VITESSE_VSC73XX
 107        tristate
 108        depends on NET_DSA
 109        select FIXED_PHY
 110        select VITESSE_PHY
 111        select GPIOLIB
 112        ---help---
 113          This enables support for the Vitesse VSC7385, VSC7388,
 114          VSC7395 and VSC7398 SparX integrated ethernet switches.
 115
 116config NET_DSA_VITESSE_VSC73XX_SPI
 117        tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
 118        depends on NET_DSA
 119        depends on SPI
 120        select NET_DSA_VITESSE_VSC73XX
 121        ---help---
 122          This enables support for the Vitesse VSC7385, VSC7388, VSC7395
 123          and VSC7398 SparX integrated ethernet switches in SPI managed mode.
 124
 125config NET_DSA_VITESSE_VSC73XX_PLATFORM
 126        tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
 127        depends on NET_DSA
 128        depends on HAS_IOMEM
 129        select NET_DSA_VITESSE_VSC73XX
 130        ---help---
 131          This enables support for the Vitesse VSC7385, VSC7388, VSC7395
 132          and VSC7398 SparX integrated ethernet switches, connected over
 133          a CPU-attached address bus and work in memory-mapped I/O mode.
 134endmenu
 135