// SPDX-License-Identifier: GPL-2.0-only
/*
 * Mediatek MT7530 DSA Switch driver
 * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
 */
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/phylink.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/gpio/consumer.h>
#include <net/dsa.h>

#include "mt7530.h"

/* String, offset, and register size in bytes if different from 4 bytes */
static const struct mt7530_mib_desc mt7530_mib[] = {
        MIB_DESC(1, 0x00, "TxDrop"),
        MIB_DESC(1, 0x04, "TxCrcErr"),
        MIB_DESC(1, 0x08, "TxUnicast"),
        MIB_DESC(1, 0x0c, "TxMulticast"),
        MIB_DESC(1, 0x10, "TxBroadcast"),
        MIB_DESC(1, 0x14, "TxCollision"),
        MIB_DESC(1, 0x18, "TxSingleCollision"),
        MIB_DESC(1, 0x1c, "TxMultipleCollision"),
        MIB_DESC(1, 0x20, "TxDeferred"),
        MIB_DESC(1, 0x24, "TxLateCollision"),
        MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
        MIB_DESC(1, 0x2c, "TxPause"),
        MIB_DESC(1, 0x30, "TxPktSz64"),
        MIB_DESC(1, 0x34, "TxPktSz65To127"),
        MIB_DESC(1, 0x38, "TxPktSz128To255"),
        MIB_DESC(1, 0x3c, "TxPktSz256To511"),
        MIB_DESC(1, 0x40, "TxPktSz512To1023"),
        MIB_DESC(1, 0x44, "Tx1024ToMax"),
        MIB_DESC(2, 0x48, "TxBytes"),
        MIB_DESC(1, 0x60, "RxDrop"),
        MIB_DESC(1, 0x64, "RxFiltering"),
        MIB_DESC(1, 0x6c, "RxMulticast"),
        MIB_DESC(1, 0x70, "RxBroadcast"),
        MIB_DESC(1, 0x74, "RxAlignErr"),
        MIB_DESC(1, 0x78, "RxCrcErr"),
        MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
        MIB_DESC(1, 0x80, "RxFragErr"),
        MIB_DESC(1, 0x84, "RxOverSzErr"),
        MIB_DESC(1, 0x88, "RxJabberErr"),
        MIB_DESC(1, 0x8c, "RxPause"),
        MIB_DESC(1, 0x90, "RxPktSz64"),
        MIB_DESC(1, 0x94, "RxPktSz65To127"),
        MIB_DESC(1, 0x98, "RxPktSz128To255"),
        MIB_DESC(1, 0x9c, "RxPktSz256To511"),
        MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
        MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
        MIB_DESC(2, 0xa8, "RxBytes"),
        MIB_DESC(1, 0xb0, "RxCtrlDrop"),
        MIB_DESC(1, 0xb4, "RxIngressDrop"),
        MIB_DESC(1, 0xb8, "RxArlDrop"),
};

static int
core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
{
        struct mii_bus *bus = priv->bus;
        int value, ret;

        /* Write the desired MMD Devad */
        ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
        if (ret < 0)
                goto err;

        /* Write the desired MMD register address */
        ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
        if (ret < 0)
                goto err;

        /* Select the Function : DATA with no post increment */
        ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
        if (ret < 0)
                goto err;

        /* Read the content of the MMD's selected register */
        value = bus->read(bus, 0, MII_MMD_DATA);

        return value;
err:
        dev_err(&bus->dev,  "failed to read mmd register\n");

        return ret;
}

static int
core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
                        int devad, u32 data)
{
        struct mii_bus *bus = priv->bus;
        int ret;

        /* Write the desired MMD Devad */
        ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
        if (ret < 0)
                goto err;

        /* Write the desired MMD register address */
        ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
        if (ret < 0)
                goto err;

        /* Select the Function : DATA with no post increment */
        ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
        if (ret < 0)
                goto err;

        /* Write the data into MMD's selected register */
        ret = bus->write(bus, 0, MII_MMD_DATA, data);
err:
        if (ret < 0)
                dev_err(&bus->dev,
                        "failed to write mmd register\n");
        return ret;
}

static void
core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
        struct mii_bus *bus = priv->bus;

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);

        core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);

        mutex_unlock(&bus->mdio_lock);
}

static void
core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
{
        struct mii_bus *bus = priv->bus;
        u32 val;

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);

        val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
        val &= ~mask;
        val |= set;
        core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);

        mutex_unlock(&bus->mdio_lock);
}

static void
core_set(struct mt7530_priv *priv, u32 reg, u32 val)
{
        core_rmw(priv, reg, 0, val);
}

static void
core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
{
        core_rmw(priv, reg, val, 0);
}

static int
mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
        struct mii_bus *bus = priv->bus;
        u16 page, r, lo, hi;
        int ret;

        page = (reg >> 6) & 0x3ff;
        r  = (reg >> 2) & 0xf;
        lo = val & 0xffff;
        hi = val >> 16;

        /* MT7530 uses 31 as the pseudo port */
        ret = bus->write(bus, 0x1f, 0x1f, page);
        if (ret < 0)
                goto err;

        ret = bus->write(bus, 0x1f, r,  lo);
        if (ret < 0)
                goto err;

        ret = bus->write(bus, 0x1f, 0x10, hi);
err:
        if (ret < 0)
                dev_err(&bus->dev,
                        "failed to write mt7530 register\n");
        return ret;
}

static u32
mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
{
        struct mii_bus *bus = priv->bus;
        u16 page, r, lo, hi;
        int ret;

        page = (reg >> 6) & 0x3ff;
        r = (reg >> 2) & 0xf;

        /* MT7530 uses 31 as the pseudo port */
        ret = bus->write(bus, 0x1f, 0x1f, page);
        if (ret < 0) {
                dev_err(&bus->dev,
                        "failed to read mt7530 register\n");
                return ret;
        }

        lo = bus->read(bus, 0x1f, r);
        hi = bus->read(bus, 0x1f, 0x10);

        return (hi << 16) | (lo & 0xffff);
}

static void
mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
        struct mii_bus *bus = priv->bus;

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);

        mt7530_mii_write(priv, reg, val);

        mutex_unlock(&bus->mdio_lock);
}

static u32
_mt7530_read(struct mt7530_dummy_poll *p)
{
        struct mii_bus          *bus = p->priv->bus;
        u32 val;

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);

        val = mt7530_mii_read(p->priv, p->reg);

        mutex_unlock(&bus->mdio_lock);

        return val;
}

static u32
mt7530_read(struct mt7530_priv *priv, u32 reg)
{
        struct mt7530_dummy_poll p;

        INIT_MT7530_DUMMY_POLL(&p, priv, reg);
        return _mt7530_read(&p);
}

static void
mt7530_rmw(struct mt7530_priv *priv, u32 reg,
           u32 mask, u32 set)
{
        struct mii_bus *bus = priv->bus;
        u32 val;

        mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);

        val = mt7530_mii_read(priv, reg);
        val &= ~mask;
        val |= set;
        mt7530_mii_write(priv, reg, val);

        mutex_unlock(&bus->mdio_lock);
}

static void
mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
{
        mt7530_rmw(priv, reg, 0, val);
}

static void
mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
{
        mt7530_rmw(priv, reg, val, 0);
}

static int
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
{
        u32 val;
        int ret;
        struct mt7530_dummy_poll p;

        /* Set the command operating upon the MAC address entries */
        val = ATC_BUSY | ATC_MAT(0) | cmd;
        mt7530_write(priv, MT7530_ATC, val);

        INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
        ret = readx_poll_timeout(_mt7530_read, &p, val,
                                 !(val & ATC_BUSY), 20, 20000);
        if (ret < 0) {
                dev_err(priv->dev, "reset timeout\n");
                return ret;
        }

        /* Additional sanity for read command if the specified
         * entry is invalid
         */
        val = mt7530_read(priv, MT7530_ATC);
        if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
                return -EINVAL;

        if (rsp)
                *rsp = val;

        return 0;
}

static void
mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
{
        u32 reg[3];
        int i;

        /* Read from ARL table into an array */
        for (i = 0; i < 3; i++) {
                reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));

                dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
                        __func__, __LINE__, i, reg[i]);
        }

        fdb->vid = (reg[1] >> CVID) & CVID_MASK;
        fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
        fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
        fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
        fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
        fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
        fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
        fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
        fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
        fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
}

static void
mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
                 u8 port_mask, const u8 *mac,
                 u8 aging, u8 type)
{
        u32 reg[3] = { 0 };
        int i;

        reg[1] |= vid & CVID_MASK;
        reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
        reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
        /* STATIC_ENT indicate that entry is static wouldn't
         * be aged out and STATIC_EMP specified as erasing an
         * entry
         */
        reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
        reg[1] |= mac[5] << MAC_BYTE_5;
        reg[1] |= mac[4] << MAC_BYTE_4;
        reg[0] |= mac[3] << MAC_BYTE_3;
        reg[0] |= mac[2] << MAC_BYTE_2;
        reg[0] |= mac[1] << MAC_BYTE_1;
        reg[0] |= mac[0] << MAC_BYTE_0;

        /* Write array into the ARL table */
        for (i = 0; i < 3; i++)
                mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
}

static int
mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
{
        struct mt7530_priv *priv = ds->priv;
        u32 ncpo1, ssc_delta, trgint, i, xtal;

        xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;

        if (xtal == HWTRAP_XTAL_20MHZ) {
                dev_err(priv->dev,
                        "%s: MT7530 with a 20MHz XTAL is not supported!\n",
                        __func__);
                return -EINVAL;
        }

        switch (mode) {
        case PHY_INTERFACE_MODE_RGMII:
                trgint = 0;
                /* PLL frequency: 125MHz */
                ncpo1 = 0x0c80;
                break;
        case PHY_INTERFACE_MODE_TRGMII:
                trgint = 1;
                if (priv->id == ID_MT7621) {
                        /* PLL frequency: 150MHz: 1.2GBit */
                        if (xtal == HWTRAP_XTAL_40MHZ)
                                ncpo1 = 0x0780;
                        if (xtal == HWTRAP_XTAL_25MHZ)
                                ncpo1 = 0x0a00;
                } else { /* PLL frequency: 250MHz: 2.0Gbit */
                        if (xtal == HWTRAP_XTAL_40MHZ)
                                ncpo1 = 0x0c80;
                        if (xtal == HWTRAP_XTAL_25MHZ)
                                ncpo1 = 0x1400;
                }
                break;
        default:
                dev_err(priv->dev, "xMII mode %d not supported\n", mode);
                return -EINVAL;
        }

        if (xtal == HWTRAP_XTAL_25MHZ)
                ssc_delta = 0x57;
        else
                ssc_delta = 0x87;

        mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
                   P6_INTF_MODE(trgint));

        /* Lower Tx Driving for TRGMII path */
        for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
                mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
                             TD_DM_DRVP(8) | TD_DM_DRVN(8));

        /* Setup core clock for MT7530 */
        if (!trgint) {
                /* Disable MT7530 core clock */
                core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);

                /* Disable PLL, since phy_device has not yet been created
                 * provided for phy_[read,write]_mmd_indirect is called, we
                 * provide our own core_write_mmd_indirect to complete this
                 * function.
                 */
                core_write_mmd_indirect(priv,
                                        CORE_GSWPLL_GRP1,
                                        MDIO_MMD_VEND2,
                                        0);

                /* Set core clock into 500Mhz */
                core_write(priv, CORE_GSWPLL_GRP2,
                           RG_GSWPLL_POSDIV_500M(1) |
                           RG_GSWPLL_FBKDIV_500M(25));

                /* Enable PLL */
                core_write(priv, CORE_GSWPLL_GRP1,
                           RG_GSWPLL_EN_PRE |
                           RG_GSWPLL_POSDIV_200M(2) |
                           RG_GSWPLL_FBKDIV_200M(32));

                /* Enable MT7530 core clock */
                core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
        }

        /* Setup the MT7530 TRGMII Tx Clock */
        core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
        core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
        core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
        core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
        core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
        core_write(priv, CORE_PLL_GROUP4,
                   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
                   RG_SYSPLL_BIAS_LPF_EN);
        core_write(priv, CORE_PLL_GROUP2,
                   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
                   RG_SYSPLL_POSDIV(1));
        core_write(priv, CORE_PLL_GROUP7,
                   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
                   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
        core_set(priv, CORE_TRGMII_GSW_CLK_CG,
                 REG_GSWCK_EN | REG_TRGMIICK_EN);

        if (!trgint)
                for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
                        mt7530_rmw(priv, MT7530_TRGMII_RD(i),
                                   RD_TAP_MASK, RD_TAP(16));
        return 0;
}

static void
mt7530_mib_reset(struct dsa_switch *ds)
{
        struct mt7530_priv *priv = ds->priv;

        mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
        mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
}

static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
{
        struct mt7530_priv *priv = ds->priv;

        return mdiobus_read_nested(priv->bus, port, regnum);
}

static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
                            u16 val)
{
        struct mt7530_priv *priv = ds->priv;

        return mdiobus_write_nested(priv->bus, port, regnum, val);
}

static void
mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
                   uint8_t *data)
{
        int i;

        if (stringset != ETH_SS_STATS)
                return;

        for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
                strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
                        ETH_GSTRING_LEN);
}

static void
mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
                         uint64_t *data)
{
        struct mt7530_priv *priv = ds->priv;
        const struct mt7530_mib_desc *mib;
        u32 reg, i;
        u64 hi;

        for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
                mib = &mt7530_mib[i];
                reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;

                data[i] = mt7530_read(priv, reg);
                if (mib->size == 2) {
                        hi = mt7530_read(priv, reg + 4);
                        data[i] |= hi << 32;
                }
        }
}

static int
mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
        if (sset != ETH_SS_STATS)
                return 0;

        return ARRAY_SIZE(mt7530_mib);
}

static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
{
        struct mt7530_priv *priv = ds->priv;
        u8 tx_delay = 0;
        int val;

        mutex_lock(&priv->reg_mutex);

        val = mt7530_read(priv, MT7530_MHWTRAP);

        val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
        val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;

        switch (priv->p5_intf_sel) {
        case P5_INTF_SEL_PHY_P0:
                /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
                val |= MHWTRAP_PHY0_SEL;
                /* fall through */
        case P5_INTF_SEL_PHY_P4:
                /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
                val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;

                /* Setup the MAC by default for the cpu port */
                mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
                break;
        case P5_INTF_SEL_GMAC5:
                /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
                val &= ~MHWTRAP_P5_DIS;
                break;
        case P5_DISABLED:
                interface = PHY_INTERFACE_MODE_NA;
                break;
        default:
                dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
                        priv->p5_intf_sel);
                goto unlock_exit;
        }

        /* Setup RGMII settings */
        if (phy_interface_mode_is_rgmii(interface)) {
                val |= MHWTRAP_P5_RGMII_MODE;

                /* P5 RGMII RX Clock Control: delay setting for 1000M */
                mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);

                /* Don't set delay in DSA mode */
                if (!dsa_is_dsa_port(priv->ds, 5) &&
                    (interface == PHY_INTERFACE_MODE_RGMII_TXID ||
                     interface == PHY_INTERFACE_MODE_RGMII_ID))
                        tx_delay = 4; /* n * 0.5 ns */

                /* P5 RGMII TX Clock Control: delay x */
                mt7530_write(priv, MT7530_P5RGMIITXCR,
                             CSR_RGMII_TXC_CFG(0x10 + tx_delay));

                /* reduce P5 RGMII Tx driving, 8mA */
                mt7530_write(priv, MT7530_IO_DRV_CR,
                             P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
        }

        mt7530_write(priv, MT7530_MHWTRAP, val);

        dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
                val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));

        priv->p5_interface = interface;

unlock_exit:
        mutex_unlock(&priv->reg_mutex);
}

static int
mt7530_cpu_port_enable(struct mt7530_priv *priv,
                       int port)
{
        /* Enable Mediatek header mode on the cpu port */
        mt7530_write(priv, MT7530_PVC_P(port),
                     PORT_SPEC_TAG);

        /* Unknown multicast frame forwarding to the cpu port */
        mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));

        /* Set CPU port number */
        if (priv->id == ID_MT7621)
                mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));

        /* CPU port gets connected to all user ports of
         * the switch
         */
        mt7530_write(priv, MT7530_PCR_P(port),
                     PCR_MATRIX(dsa_user_ports(priv->ds)));

        return 0;
}

static int
mt7530_port_enable(struct dsa_switch *ds, int port,
                   struct phy_device *phy)
{
        struct mt7530_priv *priv = ds->priv;

        if (!dsa_is_user_port(ds, port))
                return 0;

        mutex_lock(&priv->reg_mutex);

        /* Allow the user port gets connected to the cpu port and also
         * restore the port matrix if the port is the member of a certain
         * bridge.
         */
        priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
        priv->ports[port].enable = true;
        mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
                   priv->ports[port].pm);
        mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);

        mutex_unlock(&priv->reg_mutex);

        return 0;
}

static void
mt7530_port_disable(struct dsa_switch *ds, int port)
{
        struct mt7530_priv *priv = ds->priv;

        if (!dsa_is_user_port(ds, port))
                return;

        mutex_lock(&priv->reg_mutex);

        /* Clear up all port matrix which could be restored in the next
         * enablement for the port.
         */
        priv->ports[port].enable = false;
        mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
                   PCR_MATRIX_CLR);
        mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);

        mutex_unlock(&priv->reg_mutex);
}

static void
mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
{
        struct mt7530_priv *priv = ds->priv;
        u32 stp_state;

        switch (state) {
        case BR_STATE_DISABLED:
                stp_state = MT7530_STP_DISABLED;
                break;
        case BR_STATE_BLOCKING:
                stp_state = MT7530_STP_BLOCKING;
                break;
        case BR_STATE_LISTENING:
                stp_state = MT7530_STP_LISTENING;
                break;
        case BR_STATE_LEARNING:
                stp_state = MT7530_STP_LEARNING;
                break;
        case BR_STATE_FORWARDING:
        default:
                stp_state = MT7530_STP_FORWARDING;
                break;
        }

        mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state);
}

static int
mt7530_port_bridge_join(struct dsa_switch *ds, int port,
                        struct net_device *bridge)
{
        struct mt7530_priv *priv = ds->priv;
        u32 port_bitmap = BIT(MT7530_CPU_PORT);
        int i;

        mutex_lock(&priv->reg_mutex);

        for (i = 0; i < MT7530_NUM_PORTS; i++) {
                /* Add this port to the port matrix of the other ports in the
                 * same bridge. If the port is disabled, port matrix is kept
                 * and not being setup until the port becomes enabled.
                 */
                if (dsa_is_user_port(ds, i) && i != port) {
                        if (dsa_to_port(ds, i)->bridge_dev != bridge)
                                continue;
                        if (priv->ports[i].enable)
                                mt7530_set(priv, MT7530_PCR_P(i),
                                           PCR_MATRIX(BIT(port)));
                        priv->ports[i].pm |= PCR_MATRIX(BIT(port));

                        port_bitmap |= BIT(i);
                }
        }

        /* Add the all other ports to this port matrix. */
        if (priv->ports[port].enable)
                mt7530_rmw(priv, MT7530_PCR_P(port),
                           PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
        priv->ports[port].pm |= PCR_MATRIX(port_bitmap);

        mutex_unlock(&priv->reg_mutex);

        return 0;
}

static void
mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
{
        struct mt7530_priv *priv = ds->priv;
        bool all_user_ports_removed = true;
        int i;

        /* When a port is removed from the bridge, the port would be set up
         * back to the default as is at initial boot which is a VLAN-unaware
         * port.
         */
        mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
                   MT7530_PORT_MATRIX_MODE);
        mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
                   VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
                   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));

        for (i = 0; i < MT7530_NUM_PORTS; i++) {
                if (dsa_is_user_port(ds, i) &&
                    dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
                        all_user_ports_removed = false;
                        break;
                }
        }

        /* CPU port also does the same thing until all user ports belonging to
         * the CPU port get out of VLAN filtering mode.
         */
        if (all_user_ports_removed) {
                mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
                             PCR_MATRIX(dsa_user_ports(priv->ds)));
                mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG
                             | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
        }
}

static void
mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
{
        struct mt7530_priv *priv = ds->priv;

        /* The real fabric path would be decided on the membership in the
         * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS
         * means potential VLAN can be consisting of certain subset of all
         * ports.
         */
        mt7530_rmw(priv, MT7530_PCR_P(port),
                   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));

        /* Trapped into security mode allows packet forwarding through VLAN
         * table lookup.
         */
        mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
                   MT7530_PORT_SECURITY_MODE);

        /* Set the port as a user port which is to be able to recognize VID
         * from incoming packets before fetching entry within the VLAN table.
         */
        mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
                   VLAN_ATTR(MT7530_VLAN_USER) |
                   PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
}

static void
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
                         struct net_device *bridge)
{
        struct mt7530_priv *priv = ds->priv;
        int i;

        mutex_lock(&priv->reg_mutex);

        for (i = 0; i < MT7530_NUM_PORTS; i++) {
                /* Remove this port from the port matrix of the other ports
                 * in the same bridge. If the port is disabled, port matrix
                 * is kept and not being setup until the port becomes enabled.
                 * And the other port's port matrix cannot be broken when the
                 * other port is still a VLAN-aware port.
                 */
                if (dsa_is_user_port(ds, i) && i != port &&
                   !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
                        if (dsa_to_port(ds, i)->bridge_dev != bridge)
                                continue;
                        if (priv->ports[i].enable)
                                mt7530_clear(priv, MT7530_PCR_P(i),
                                             PCR_MATRIX(BIT(port)));
                        priv->ports[i].pm &= ~PCR_MATRIX(BIT(port));
                }
        }

        /* Set the cpu port to be the only one in the port matrix of
         * this port.
         */
        if (priv->ports[port].enable)
                mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
                           PCR_MATRIX(BIT(MT7530_CPU_PORT)));
        priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));

        mutex_unlock(&priv->reg_mutex);
}

static int
mt7530_port_fdb_add(struct dsa_switch *ds, int port,
                    const unsigned char *addr, u16 vid)
{
        struct mt7530_priv *priv = ds->priv;
        int ret;
        u8 port_mask = BIT(port);

        mutex_lock(&priv->reg_mutex);
        mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
        ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
        mutex_unlock(&priv->reg_mutex);

        return ret;
}

static int
mt7530_port_fdb_del(struct dsa_switch *ds, int port,
                    const unsigned char *addr, u16 vid)
{
        struct mt7530_priv *priv = ds->priv;
        int ret;
        u8 port_mask = BIT(port);

        mutex_lock(&priv->reg_mutex);
        mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
        ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
        mutex_unlock(&priv->reg_mutex);

        return ret;
}

static int
mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
                     dsa_fdb_dump_cb_t *cb, void *data)
{
        struct mt7530_priv *priv = ds->priv;
        struct mt7530_fdb _fdb = { 0 };
        int cnt = MT7530_NUM_FDB_RECORDS;
        int ret = 0;
        u32 rsp = 0;

        mutex_lock(&priv->reg_mutex);

        ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
        if (ret < 0)
                goto err;

        do {
                if (rsp & ATC_SRCH_HIT) {
                        mt7530_fdb_read(priv, &_fdb);
                        if (_fdb.port_mask & BIT(port)) {
                                ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
                                         data);
                                if (ret < 0)
                                        break;
                        }
                }
        } while (--cnt &&
                 !(rsp & ATC_SRCH_END) &&
                 !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
err:
        mutex_unlock(&priv->reg_mutex);

        return 0;
}

static int
mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
{
        struct mt7530_dummy_poll p;
        u32 val;
        int ret;

        val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
        mt7530_write(priv, MT7530_VTCR, val);

        INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
        ret = readx_poll_timeout(_mt7530_read, &p, val,
                                 !(val & VTCR_BUSY), 20, 20000);
        if (ret < 0) {
                dev_err(priv->dev, "poll timeout\n");
                return ret;
        }

        val = mt7530_read(priv, MT7530_VTCR);
        if (val & VTCR_INVALID) {
                dev_err(priv->dev, "read VTCR invalid\n");
                return -EINVAL;
        }

        return 0;
}

static int
mt7530_port_vlan_filtering(struct dsa_switch *ds, int port,
                           bool vlan_filtering)
{
        if (vlan_filtering) {
                /* The port is being kept as VLAN-unaware port when bridge is
                 * set up with vlan_filtering not being set, Otherwise, the
                 * port and the corresponding CPU port is required the setup
                 * for becoming a VLAN-aware port.
                 */
                mt7530_port_set_vlan_aware(ds, port);
                mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT);
        } else {
                mt7530_port_set_vlan_unaware(ds, port);
        }

        return 0;
}

static int
mt7530_port_vlan_prepare(struct dsa_switch *ds, int port,
                         const struct switchdev_obj_port_vlan *vlan)
{
        /* nothing needed */

        return 0;
}

static void
mt7530_hw_vlan_add(struct mt7530_priv *priv,
                   struct mt7530_hw_vlan_entry *entry)
{
        u8 new_members;
        u32 val;

        new_members = entry->old_members | BIT(entry->port) |
                      BIT(MT7530_CPU_PORT);

        /* Validate the entry with independent learning, create egress tag per
         * VLAN and joining the port as one of the port members.
         */
        val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID;
        mt7530_write(priv, MT7530_VAWD1, val);

        /* Decide whether adding tag or not for those outgoing packets from the
         * port inside the VLAN.

         */
        val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG :
                                MT7530_VLAN_EGRESS_TAG;
        mt7530_rmw(priv, MT7530_VAWD2,
                   ETAG_CTRL_P_MASK(entry->port),
                   ETAG_CTRL_P(entry->port, val));

        /* CPU port is always taken as a tagged port for serving more than one
         * VLANs across and also being applied with egress type stack mode for
         * that VLAN tags would be appended after hardware special tag used as
         * DSA tag.
         */
        mt7530_rmw(priv, MT7530_VAWD2,
                   ETAG_CTRL_P_MASK(MT7530_CPU_PORT),
                   ETAG_CTRL_P(MT7530_CPU_PORT,
                               MT7530_VLAN_EGRESS_STACK));
}

static void
mt7530_hw_vlan_del(struct mt7530_priv *priv,
                   struct mt7530_hw_vlan_entry *entry)
{
        u8 new_members;
        u32 val;

        new_members = entry->old_members & ~BIT(entry->port);

        val = mt7530_read(priv, MT7530_VAWD1);
        if (!(val & VLAN_VALID)) {
                dev_err(priv->dev,
                        "Cannot be deleted due to invalid entry\n");
                return;
        }

        /* If certain member apart from CPU port is still alive in the VLAN,
         * the entry would be kept valid. Otherwise, the entry is got to be
         * disabled.
         */
        if (new_members && new_members != BIT(MT7530_CPU_PORT)) {
                val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
                      VLAN_VALID;
                mt7530_write(priv, MT7530_VAWD1, val);
        } else {
                mt7530_write(priv, MT7530_VAWD1, 0);
                mt7530_write(priv, MT7530_VAWD2, 0);
        }
}

static void
mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
                      struct mt7530_hw_vlan_entry *entry,
                      mt7530_vlan_op vlan_op)
{
        u32 val;

        /* Fetch entry */
        mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);

        val = mt7530_read(priv, MT7530_VAWD1);

        entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;

        /* Manipulate entry */
        vlan_op(priv, entry);

        /* Flush result to hardware */
        mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid);
}

static void
mt7530_port_vlan_add(struct dsa_switch *ds, int port,
                     const struct switchdev_obj_port_vlan *vlan)
{
        bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
        bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
        struct mt7530_hw_vlan_entry new_entry;
        struct mt7530_priv *priv = ds->priv;
        u16 vid;

        /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
         * being set.
         */
        if (!dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
                return;

        mutex_lock(&priv->reg_mutex);

        for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
                mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
                mt7530_hw_vlan_update(priv, vid, &new_entry,
                                      mt7530_hw_vlan_add);
        }

        if (pvid) {
                mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
                           G0_PORT_VID(vlan->vid_end));
                priv->ports[port].pvid = vlan->vid_end;
        }

        mutex_unlock(&priv->reg_mutex);
}

static int
mt7530_port_vlan_del(struct dsa_switch *ds, int port,
                     const struct switchdev_obj_port_vlan *vlan)
{
        struct mt7530_hw_vlan_entry target_entry;
        struct mt7530_priv *priv = ds->priv;
        u16 vid, pvid;

        /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
         * being set.
         */
        if (!dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
                return 0;

        mutex_lock(&priv->reg_mutex);

        pvid = priv->ports[port].pvid;
        for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
                mt7530_hw_vlan_entry_init(&target_entry, port, 0);
                mt7530_hw_vlan_update(priv, vid, &target_entry,
                                      mt7530_hw_vlan_del);

                /* PVID is being restored to the default whenever the PVID port
                 * is being removed from the VLAN.
                 */
                if (pvid == vid)
                        pvid = G0_PORT_VID_DEF;
        }

        mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid);
        priv->ports[port].pvid = pvid;

        mutex_unlock(&priv->reg_mutex);

        return 0;
}

static int mt7530_port_mirror_add(struct dsa_switch *ds, int port,
                                  struct dsa_mall_mirror_tc_entry *mirror,
                                  bool ingress)
{
        struct mt7530_priv *priv = ds->priv;
        u32 val;

        /* Check for existent entry */
        if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
                return -EEXIST;

        val = mt7530_read(priv, MT7530_MFC);

        /* MT7530 only supports one monitor port */
        if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port)
                return -EEXIST;

        val |= MIRROR_EN;
        val &= ~MIRROR_MASK;
        val |= mirror->to_local_port;
        mt7530_write(priv, MT7530_MFC, val);

        val = mt7530_read(priv, MT7530_PCR_P(port));
        if (ingress) {
                val |= PORT_RX_MIR;
                priv->mirror_rx |= BIT(port);
        } else {
                val |= PORT_TX_MIR;
                priv->mirror_tx |= BIT(port);
        }
        mt7530_write(priv, MT7530_PCR_P(port), val);

        return 0;
}

static void mt7530_port_mirror_del(struct dsa_switch *ds, int port,
                                   struct dsa_mall_mirror_tc_entry *mirror)
{
        struct mt7530_priv *priv = ds->priv;
        u32 val;

        val = mt7530_read(priv, MT7530_PCR_P(port));
        if (mirror->ingress) {
                val &= ~PORT_RX_MIR;
                priv->mirror_rx &= ~BIT(port);
        } else {
                val &= ~PORT_TX_MIR;
                priv->mirror_tx &= ~BIT(port);
        }
        mt7530_write(priv, MT7530_PCR_P(port), val);

        if (!priv->mirror_rx && !priv->mirror_tx) {
                val = mt7530_read(priv, MT7530_MFC);
                val &= ~MIRROR_EN;
                mt7530_write(priv, MT7530_MFC, val);
        }
}

static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds, int port,
                     enum dsa_tag_protocol mp)
{
        struct mt7530_priv *priv = ds->priv;

        if (port != MT7530_CPU_PORT) {
                dev_warn(priv->dev,
                         "port not matched with tagging CPU port\n");
                return DSA_TAG_PROTO_NONE;
        } else {
                return DSA_TAG_PROTO_MTK;
        }
}

static int
mt7530_setup(struct dsa_switch *ds)
{
        struct mt7530_priv *priv = ds->priv;
        struct device_node *phy_node;
        struct device_node *mac_np;
        struct mt7530_dummy_poll p;
        phy_interface_t interface;
        struct device_node *dn;
        u32 id, val;
        int ret, i;

        /* The parent node of master netdev which holds the common system
         * controller also is the container for two GMACs nodes representing
         * as two netdev instances.
         */
        dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;

        if (priv->id == ID_MT7530) {
                regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
                ret = regulator_enable(priv->core_pwr);
                if (ret < 0) {
                        dev_err(priv->dev,
                                "Failed to enable core power: %d\n", ret);
                        return ret;
                }

                regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
                ret = regulator_enable(priv->io_pwr);
                if (ret < 0) {
                        dev_err(priv->dev, "Failed to enable io pwr: %d\n",
                                ret);
                        return ret;
                }
        }

        /* Reset whole chip through gpio pin or memory-mapped registers for
         * different type of hardware
         */
        if (priv->mcm) {
                reset_control_assert(priv->rstc);
                usleep_range(1000, 1100);
                reset_control_deassert(priv->rstc);
        } else {
                gpiod_set_value_cansleep(priv->reset, 0);
                usleep_range(1000, 1100);
                gpiod_set_value_cansleep(priv->reset, 1);
        }

        /* Waiting for MT7530 got to stable */
        INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
        ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
                                 20, 1000000);
        if (ret < 0) {
                dev_err(priv->dev, "reset timeout\n");
                return ret;
        }

        id = mt7530_read(priv, MT7530_CREV);
        id >>= CHIP_NAME_SHIFT;
        if (id != MT7530_ID) {
                dev_err(priv->dev, "chip %x can't be supported\n", id);
                return -ENODEV;
        }

        /* Reset the switch through internal reset */
        mt7530_write(priv, MT7530_SYS_CTRL,
                     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
                     SYS_CTRL_REG_RST);

        /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
        val = mt7530_read(priv, MT7530_MHWTRAP);
        val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
        val |= MHWTRAP_MANUAL;
        mt7530_write(priv, MT7530_MHWTRAP, val);

        priv->p6_interface = PHY_INTERFACE_MODE_NA;

        /* Enable and reset MIB counters */
        mt7530_mib_reset(ds);

        for (i = 0; i < MT7530_NUM_PORTS; i++) {
                /* Disable forwarding by default on all ports */
                mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
                           PCR_MATRIX_CLR);

                if (dsa_is_cpu_port(ds, i))
                        mt7530_cpu_port_enable(priv, i);
                else
                        mt7530_port_disable(ds, i);

                /* Enable consistent egress tag */
                mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
                           PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
        }

        /* Setup port 5 */
        priv->p5_intf_sel = P5_DISABLED;
        interface = PHY_INTERFACE_MODE_NA;

        if (!dsa_is_unused_port(ds, 5)) {
                priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
                ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface);
                if (ret && ret != -ENODEV)
                        return ret;
        } else {
                /* Scan the ethernet nodes. look for GMAC1, lookup used phy */
                for_each_child_of_node(dn, mac_np) {
                        if (!of_device_is_compatible(mac_np,
                                                     "mediatek,eth-mac"))
                                continue;

                        ret = of_property_read_u32(mac_np, "reg", &id);
                        if (ret < 0 || id != 1)
                                continue;

                        phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
                        if (!phy_node)
                                continue;

                        if (phy_node->parent == priv->dev->of_node->parent) {
                                ret = of_get_phy_mode(mac_np, &interface);
                                if (ret && ret != -ENODEV)
                                        return ret;
                                id = of_mdio_parse_addr(ds->dev, phy_node);
                                if (id == 0)
                                        priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
                                if (id == 4)
                                        priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
                        }
                        of_node_put(phy_node);
                        break;
                }
        }

        mt7530_setup_port5(ds, interface);

        /* Flush the FDB table */
        ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
        if (ret < 0)
                return ret;

        return 0;
}

static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
                                      unsigned int mode,
                                      const struct phylink_link_state *state)
{
        struct mt7530_priv *priv = ds->priv;
        u32 mcr_cur, mcr_new;

        switch (port) {
        case 0: /* Internal phy */
        case 1:
        case 2:
        case 3:
        case 4:
                if (state->interface != PHY_INTERFACE_MODE_GMII)
                        return;
                break;
        case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
                if (priv->p5_interface == state->interface)
                        break;
                if (!phy_interface_mode_is_rgmii(state->interface) &&
                    state->interface != PHY_INTERFACE_MODE_MII &&
                    state->interface != PHY_INTERFACE_MODE_GMII)
                        return;

                mt7530_setup_port5(ds, state->interface);
                break;
        case 6: /* 1st cpu port */
                if (priv->p6_interface == state->interface)
                        break;

                if (state->interface != PHY_INTERFACE_MODE_RGMII &&
                    state->interface != PHY_INTERFACE_MODE_TRGMII)
                        return;

                /* Setup TX circuit incluing relevant PAD and driving */
                mt7530_pad_clk_setup(ds, state->interface);

                priv->p6_interface = state->interface;
                break;
        default:
                dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
                return;
        }

        if (phylink_autoneg_inband(mode)) {
                dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
                        __func__);
                return;
        }

        mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
        mcr_new = mcr_cur;
        mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
        mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
                   PMCR_BACKPR_EN | PMCR_FORCE_MODE;

        /* Are we connected to external phy */
        if (port == 5 && dsa_is_user_port(ds, 5))
                mcr_new |= PMCR_EXT_PHY;

        if (mcr_new != mcr_cur)
                mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
}

static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port,
                                         unsigned int mode,
                                         phy_interface_t interface)
{
        struct mt7530_priv *priv = ds->priv;

        mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}

static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
                                       unsigned int mode,
                                       phy_interface_t interface,
                                       struct phy_device *phydev,
                                       int speed, int duplex,
                                       bool tx_pause, bool rx_pause)
{
        struct mt7530_priv *priv = ds->priv;
        u32 mcr;

        mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;

        switch (speed) {
        case SPEED_1000:
                mcr |= PMCR_FORCE_SPEED_1000;
                break;
        case SPEED_100:
                mcr |= PMCR_FORCE_SPEED_100;
                break;
        }
        if (duplex == DUPLEX_FULL) {
                mcr |= PMCR_FORCE_FDX;
                if (tx_pause)
                        mcr |= PMCR_TX_FC_EN;
                if (rx_pause)
                        mcr |= PMCR_RX_FC_EN;
        }

        mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}

static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
                                    unsigned long *supported,
                                    struct phylink_link_state *state)
{
        __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };

        switch (port) {
        case 0: /* Internal phy */
        case 1:
        case 2:
        case 3:
        case 4:
                if (state->interface != PHY_INTERFACE_MODE_NA &&
                    state->interface != PHY_INTERFACE_MODE_GMII)
                        goto unsupported;
                break;
        case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
                if (state->interface != PHY_INTERFACE_MODE_NA &&
                    !phy_interface_mode_is_rgmii(state->interface) &&
                    state->interface != PHY_INTERFACE_MODE_MII &&
                    state->interface != PHY_INTERFACE_MODE_GMII)
                        goto unsupported;
                break;
        case 6: /* 1st cpu port */
                if (state->interface != PHY_INTERFACE_MODE_NA &&
                    state->interface != PHY_INTERFACE_MODE_RGMII &&
                    state->interface != PHY_INTERFACE_MODE_TRGMII)
                        goto unsupported;
                break;
        default:
                dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
unsupported:
                linkmode_zero(supported);
                return;
        }

        phylink_set_port_modes(mask);
        phylink_set(mask, Autoneg);

        if (state->interface == PHY_INTERFACE_MODE_TRGMII) {
                phylink_set(mask, 1000baseT_Full);
        } else {
                phylink_set(mask, 10baseT_Half);
                phylink_set(mask, 10baseT_Full);
                phylink_set(mask, 100baseT_Half);
                phylink_set(mask, 100baseT_Full);

                if (state->interface != PHY_INTERFACE_MODE_MII) {
                        phylink_set(mask, 1000baseT_Half);
                        phylink_set(mask, 1000baseT_Full);
                        if (port == 5)
                                phylink_set(mask, 1000baseX_Full);
                }
        }

        phylink_set(mask, Pause);
        phylink_set(mask, Asym_Pause);

        linkmode_and(supported, supported, mask);
        linkmode_and(state->advertising, state->advertising, mask);
}

static int
mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port,
                              struct phylink_link_state *state)
{
        struct mt7530_priv *priv = ds->priv;
        u32 pmsr;

        if (port < 0 || port >= MT7530_NUM_PORTS)
                return -EINVAL;

        pmsr = mt7530_read(priv, MT7530_PMSR_P(port));

        state->link = (pmsr & PMSR_LINK);
        state->an_complete = state->link;
        state->duplex = !!(pmsr & PMSR_DPX);

        switch (pmsr & PMSR_SPEED_MASK) {
        case PMSR_SPEED_10:
                state->speed = SPEED_10;
                break;
        case PMSR_SPEED_100:
                state->speed = SPEED_100;
                break;
        case PMSR_SPEED_1000:
                state->speed = SPEED_1000;
                break;
        default:
                state->speed = SPEED_UNKNOWN;
                break;
        }

        state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX);
        if (pmsr & PMSR_RX_FC)
                state->pause |= MLO_PAUSE_RX;
        if (pmsr & PMSR_TX_FC)
                state->pause |= MLO_PAUSE_TX;

        return 1;
}

static const struct dsa_switch_ops mt7530_switch_ops = {
        .get_tag_protocol       = mtk_get_tag_protocol,
        .setup                  = mt7530_setup,
        .get_strings            = mt7530_get_strings,
        .phy_read               = mt7530_phy_read,
        .phy_write              = mt7530_phy_write,
        .get_ethtool_stats      = mt7530_get_ethtool_stats,
        .get_sset_count         = mt7530_get_sset_count,
        .port_enable            = mt7530_port_enable,
        .port_disable           = mt7530_port_disable,
        .port_stp_state_set     = mt7530_stp_state_set,
        .port_bridge_join       = mt7530_port_bridge_join,
        .port_bridge_leave      = mt7530_port_bridge_leave,
        .port_fdb_add           = mt7530_port_fdb_add,
        .port_fdb_del           = mt7530_port_fdb_del,
        .port_fdb_dump          = mt7530_port_fdb_dump,
        .port_vlan_filtering    = mt7530_port_vlan_filtering,
        .port_vlan_prepare      = mt7530_port_vlan_prepare,
        .port_vlan_add          = mt7530_port_vlan_add,
        .port_vlan_del          = mt7530_port_vlan_del,
        .port_mirror_add        = mt7530_port_mirror_add,
        .port_mirror_del        = mt7530_port_mirror_del,
        .phylink_validate       = mt7530_phylink_validate,
        .phylink_mac_link_state = mt7530_phylink_mac_link_state,
        .phylink_mac_config     = mt7530_phylink_mac_config,
        .phylink_mac_link_down  = mt7530_phylink_mac_link_down,
        .phylink_mac_link_up    = mt7530_phylink_mac_link_up,
};

static const struct of_device_id mt7530_of_match[] = {
        { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
        { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
        { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);

static int
mt7530_probe(struct mdio_device *mdiodev)
{
        struct mt7530_priv *priv;
        struct device_node *dn;

        dn = mdiodev->dev.of_node;

        priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
        if (!priv)
                return -ENOMEM;

        priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
        if (!priv->ds)
                return -ENOMEM;

        priv->ds->dev = &mdiodev->dev;
        priv->ds->num_ports = DSA_MAX_PORTS;

        /* Use medatek,mcm property to distinguish hardware type that would
         * casues a little bit differences on power-on sequence.
         */
        priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
        if (priv->mcm) {
                dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");

                priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
                if (IS_ERR(priv->rstc)) {
                        dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
                        return PTR_ERR(priv->rstc);
                }
        }

        /* Get the hardware identifier from the devicetree node.
         * We will need it for some of the clock and regulator setup.
         */
        priv->id = (unsigned int)(unsigned long)
                of_device_get_match_data(&mdiodev->dev);

        if (priv->id == ID_MT7530) {
                priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
                if (IS_ERR(priv->core_pwr))
                        return PTR_ERR(priv->core_pwr);

                priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
                if (IS_ERR(priv->io_pwr))
                        return PTR_ERR(priv->io_pwr);
        }

        /* Not MCM that indicates switch works as the remote standalone
         * integrated circuit so the GPIO pin would be used to complete
         * the reset, otherwise memory-mapped register accessing used
         * through syscon provides in the case of MCM.
         */
        if (!priv->mcm) {
                priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
                                                      GPIOD_OUT_LOW);
                if (IS_ERR(priv->reset)) {
                        dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
                        return PTR_ERR(priv->reset);
                }
        }

        priv->bus = mdiodev->bus;
        priv->dev = &mdiodev->dev;
        priv->ds->priv = priv;
        priv->ds->ops = &mt7530_switch_ops;
        mutex_init(&priv->reg_mutex);
        dev_set_drvdata(&mdiodev->dev, priv);

        return dsa_register_switch(priv->ds);
}

static void
mt7530_remove(struct mdio_device *mdiodev)
{
        struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
        int ret = 0;

        ret = regulator_disable(priv->core_pwr);
        if (ret < 0)
                dev_err(priv->dev,
                        "Failed to disable core power: %d\n", ret);

        ret = regulator_disable(priv->io_pwr);
        if (ret < 0)
                dev_err(priv->dev, "Failed to disable io pwr: %d\n",
                        ret);

        dsa_unregister_switch(priv->ds);
        mutex_destroy(&priv->reg_mutex);
}

static struct mdio_driver mt7530_mdio_driver = {
        .probe  = mt7530_probe,
        .remove = mt7530_remove,
        .mdiodrv.driver = {
                .name = "mt7530",
                .of_match_table = mt7530_of_match,
        },
};

mdio_module_driver(mt7530_mdio_driver);

MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
MODULE_LICENSE("GPL");