1/* 2 * Management Module Support for MPT (Message Passing Technology) based 3 * controllers 4 * 5 * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h 6 * Copyright (C) 2012-2014 LSI Corporation 7 * Copyright (C) 2013-2014 Avago Technologies 8 * (mailto: MPT-FusionLinux.pdl@avagotech.com) 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * as published by the Free Software Foundation; either version 2 13 * of the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * NO WARRANTY 21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 25 * solely responsible for determining the appropriateness of using and 26 * distributing the Program and assumes all risks associated with its 27 * exercise of rights under this Agreement, including but not limited to 28 * the risks and costs of program errors, damage to or loss of data, 29 * programs or equipment, and unavailability or interruption of operations. 30 31 * DISCLAIMER OF LIABILITY 32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 39 40 * You should have received a copy of the GNU General Public License 41 * along with this program; if not, write to the Free Software 42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 43 * USA. 44 */ 45 46#ifndef MPT3SAS_CTL_H_INCLUDED 47#define MPT3SAS_CTL_H_INCLUDED 48 49#ifdef __KERNEL__ 50#include <linux/miscdevice.h> 51#endif 52 53#ifndef MPT2SAS_MINOR 54#define MPT2SAS_MINOR (MPT_MINOR + 1) 55#endif 56#ifndef MPT3SAS_MINOR 57#define MPT3SAS_MINOR (MPT_MINOR + 2) 58#endif 59#define MPT2SAS_DEV_NAME "mpt2ctl" 60#define MPT3SAS_DEV_NAME "mpt3ctl" 61#define MPT3_MAGIC_NUMBER 'L' 62#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ 63 64/** 65 * IOCTL opcodes 66 */ 67#define MPT3IOCINFO _IOWR(MPT3_MAGIC_NUMBER, 17, \ 68 struct mpt3_ioctl_iocinfo) 69#define MPT3COMMAND _IOWR(MPT3_MAGIC_NUMBER, 20, \ 70 struct mpt3_ioctl_command) 71#ifdef CONFIG_COMPAT 72#define MPT3COMMAND32 _IOWR(MPT3_MAGIC_NUMBER, 20, \ 73 struct mpt3_ioctl_command32) 74#endif 75#define MPT3EVENTQUERY _IOWR(MPT3_MAGIC_NUMBER, 21, \ 76 struct mpt3_ioctl_eventquery) 77#define MPT3EVENTENABLE _IOWR(MPT3_MAGIC_NUMBER, 22, \ 78 struct mpt3_ioctl_eventenable) 79#define MPT3EVENTREPORT _IOWR(MPT3_MAGIC_NUMBER, 23, \ 80 struct mpt3_ioctl_eventreport) 81#define MPT3HARDRESET _IOWR(MPT3_MAGIC_NUMBER, 24, \ 82 struct mpt3_ioctl_diag_reset) 83#define MPT3BTDHMAPPING _IOWR(MPT3_MAGIC_NUMBER, 31, \ 84 struct mpt3_ioctl_btdh_mapping) 85 86/* diag buffer support */ 87#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \ 88 struct mpt3_diag_register) 89#define MPT3DIAGRELEASE _IOWR(MPT3_MAGIC_NUMBER, 27, \ 90 struct mpt3_diag_release) 91#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \ 92 struct mpt3_diag_unregister) 93#define MPT3DIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 29, \ 94 struct mpt3_diag_query) 95#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \ 96 struct mpt3_diag_read_buffer) 97 98/* Trace Buffer default UniqueId */ 99#define MPT2DIAGBUFFUNIQUEID (0x07075900) 100#define MPT3DIAGBUFFUNIQUEID (0x4252434D) 101 102/* UID not found */ 103#define MPT3_DIAG_UID_NOT_FOUND (0xFF) 104 105 106/** 107 * struct mpt3_ioctl_header - main header structure 108 * @ioc_number - IOC unit number 109 * @port_number - IOC port number 110 * @max_data_size - maximum number bytes to transfer on read 111 */ 112struct mpt3_ioctl_header { 113 uint32_t ioc_number; 114 uint32_t port_number; 115 uint32_t max_data_size; 116}; 117 118/** 119 * struct mpt3_ioctl_diag_reset - diagnostic reset 120 * @hdr - generic header 121 */ 122struct mpt3_ioctl_diag_reset { 123 struct mpt3_ioctl_header hdr; 124}; 125 126 127/** 128 * struct mpt3_ioctl_pci_info - pci device info 129 * @device - pci device id 130 * @function - pci function id 131 * @bus - pci bus id 132 * @segment_id - pci segment id 133 */ 134struct mpt3_ioctl_pci_info { 135 union { 136 struct { 137 uint32_t device:5; 138 uint32_t function:3; 139 uint32_t bus:24; 140 } bits; 141 uint32_t word; 142 } u; 143 uint32_t segment_id; 144}; 145 146 147#define MPT2_IOCTL_INTERFACE_SCSI (0x00) 148#define MPT2_IOCTL_INTERFACE_FC (0x01) 149#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) 150#define MPT2_IOCTL_INTERFACE_SAS (0x03) 151#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) 152#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05) 153#define MPT3_IOCTL_INTERFACE_SAS3 (0x06) 154#define MPT3_IOCTL_INTERFACE_SAS35 (0x07) 155#define MPT2_IOCTL_VERSION_LENGTH (32) 156 157/** 158 * struct mpt3_ioctl_iocinfo - generic controller info 159 * @hdr - generic header 160 * @adapter_type - type of adapter (spi, fc, sas) 161 * @port_number - port number 162 * @pci_id - PCI Id 163 * @hw_rev - hardware revision 164 * @sub_system_device - PCI subsystem Device ID 165 * @sub_system_vendor - PCI subsystem Vendor ID 166 * @rsvd0 - reserved 167 * @firmware_version - firmware version 168 * @bios_version - BIOS version 169 * @driver_version - driver version - 32 ASCII characters 170 * @rsvd1 - reserved 171 * @scsi_id - scsi id of adapter 0 172 * @rsvd2 - reserved 173 * @pci_information - pci info (2nd revision) 174 */ 175struct mpt3_ioctl_iocinfo { 176 struct mpt3_ioctl_header hdr; 177 uint32_t adapter_type; 178 uint32_t port_number; 179 uint32_t pci_id; 180 uint32_t hw_rev; 181 uint32_t subsystem_device; 182 uint32_t subsystem_vendor; 183 uint32_t rsvd0; 184 uint32_t firmware_version; 185 uint32_t bios_version; 186 uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; 187 uint8_t rsvd1; 188 uint8_t scsi_id; 189 uint16_t rsvd2; 190 struct mpt3_ioctl_pci_info pci_information; 191}; 192 193 194/* number of event log entries */ 195#define MPT3SAS_CTL_EVENT_LOG_SIZE (200) 196 197/** 198 * struct mpt3_ioctl_eventquery - query event count and type 199 * @hdr - generic header 200 * @event_entries - number of events returned by get_event_report 201 * @rsvd - reserved 202 * @event_types - type of events currently being captured 203 */ 204struct mpt3_ioctl_eventquery { 205 struct mpt3_ioctl_header hdr; 206 uint16_t event_entries; 207 uint16_t rsvd; 208 uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 209}; 210 211/** 212 * struct mpt3_ioctl_eventenable - enable/disable event capturing 213 * @hdr - generic header 214 * @event_types - toggle off/on type of events to be captured 215 */ 216struct mpt3_ioctl_eventenable { 217 struct mpt3_ioctl_header hdr; 218 uint32_t event_types[4]; 219}; 220 221#define MPT3_EVENT_DATA_SIZE (192) 222/** 223 * struct MPT3_IOCTL_EVENTS - 224 * @event - the event that was reported 225 * @context - unique value for each event assigned by driver 226 * @data - event data returned in fw reply message 227 */ 228struct MPT3_IOCTL_EVENTS { 229 uint32_t event; 230 uint32_t context; 231 uint8_t data[MPT3_EVENT_DATA_SIZE]; 232}; 233 234/** 235 * struct mpt3_ioctl_eventreport - returing event log 236 * @hdr - generic header 237 * @event_data - (see struct MPT3_IOCTL_EVENTS) 238 */ 239struct mpt3_ioctl_eventreport { 240 struct mpt3_ioctl_header hdr; 241 struct MPT3_IOCTL_EVENTS event_data[1]; 242}; 243 244/** 245 * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl 246 * @hdr - generic header 247 * @timeout - command timeout in seconds. (if zero then use driver default 248 * value). 249 * @reply_frame_buf_ptr - reply location 250 * @data_in_buf_ptr - destination for read 251 * @data_out_buf_ptr - data source for write 252 * @sense_data_ptr - sense data location 253 * @max_reply_bytes - maximum number of reply bytes to be sent to app. 254 * @data_in_size - number bytes for data transfer in (read) 255 * @data_out_size - number bytes for data transfer out (write) 256 * @max_sense_bytes - maximum number of bytes for auto sense buffers 257 * @data_sge_offset - offset in words from the start of the request message to 258 * the first SGL 259 * @mf[1]; 260 */ 261struct mpt3_ioctl_command { 262 struct mpt3_ioctl_header hdr; 263 uint32_t timeout; 264 void __user *reply_frame_buf_ptr; 265 void __user *data_in_buf_ptr; 266 void __user *data_out_buf_ptr; 267 void __user *sense_data_ptr; 268 uint32_t max_reply_bytes; 269 uint32_t data_in_size; 270 uint32_t data_out_size; 271 uint32_t max_sense_bytes; 272 uint32_t data_sge_offset; 273 uint8_t mf[1]; 274}; 275 276#ifdef CONFIG_COMPAT 277struct mpt3_ioctl_command32 { 278 struct mpt3_ioctl_header hdr; 279 uint32_t timeout; 280 uint32_t reply_frame_buf_ptr; 281 uint32_t data_in_buf_ptr; 282 uint32_t data_out_buf_ptr; 283 uint32_t sense_data_ptr; 284 uint32_t max_reply_bytes; 285 uint32_t data_in_size; 286 uint32_t data_out_size; 287 uint32_t max_sense_bytes; 288 uint32_t data_sge_offset; 289 uint8_t mf[1]; 290}; 291#endif 292 293/** 294 * struct mpt3_ioctl_btdh_mapping - mapping info 295 * @hdr - generic header 296 * @id - target device identification number 297 * @bus - SCSI bus number that the target device exists on 298 * @handle - device handle for the target device 299 * @rsvd - reserved 300 * 301 * To obtain a bus/id the application sets 302 * handle to valid handle, and bus/id to 0xFFFF. 303 * 304 * To obtain the device handle the application sets 305 * bus/id valid value, and the handle to 0xFFFF. 306 */ 307struct mpt3_ioctl_btdh_mapping { 308 struct mpt3_ioctl_header hdr; 309 uint32_t id; 310 uint32_t bus; 311 uint16_t handle; 312 uint16_t rsvd; 313}; 314 315 316 317/* application flags for mpt3_diag_register, mpt3_diag_query */ 318#define MPT3_APP_FLAGS_APP_OWNED (0x0001) 319#define MPT3_APP_FLAGS_BUFFER_VALID (0x0002) 320#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) 321#define MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC (0x0008) 322 323/* flags for mpt3_diag_read_buffer */ 324#define MPT3_FLAGS_REREGISTER (0x0001) 325 326#define MPT3_PRODUCT_SPECIFIC_DWORDS 23 327 328/** 329 * struct mpt3_diag_register - application register with driver 330 * @hdr - generic header 331 * @reserved - 332 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED 333 * @application_flags - misc flags 334 * @diagnostic_flags - specifies flags affecting command processing 335 * @product_specific - product specific information 336 * @requested_buffer_size - buffers size in bytes 337 * @unique_id - tag specified by application that is used to signal ownership 338 * of the buffer. 339 * 340 * This will allow the driver to setup any required buffers that will be 341 * needed by firmware to communicate with the driver. 342 */ 343struct mpt3_diag_register { 344 struct mpt3_ioctl_header hdr; 345 uint8_t reserved; 346 uint8_t buffer_type; 347 uint16_t application_flags; 348 uint32_t diagnostic_flags; 349 uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; 350 uint32_t requested_buffer_size; 351 uint32_t unique_id; 352}; 353 354/** 355 * struct mpt3_diag_unregister - application unregister with driver 356 * @hdr - generic header 357 * @unique_id - tag uniquely identifies the buffer to be unregistered 358 * 359 * This will allow the driver to cleanup any memory allocated for diag 360 * messages and to free up any resources. 361 */ 362struct mpt3_diag_unregister { 363 struct mpt3_ioctl_header hdr; 364 uint32_t unique_id; 365}; 366 367/** 368 * struct mpt3_diag_query - query relevant info associated with diag buffers 369 * @hdr - generic header 370 * @reserved - 371 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED 372 * @application_flags - misc flags 373 * @diagnostic_flags - specifies flags affecting command processing 374 * @product_specific - product specific information 375 * @total_buffer_size - diag buffer size in bytes 376 * @driver_added_buffer_size - size of extra space appended to end of buffer 377 * @unique_id - unique id associated with this buffer. 378 * 379 * The application will send only buffer_type and unique_id. Driver will 380 * inspect unique_id first, if valid, fill in all the info. If unique_id is 381 * 0x00, the driver will return info specified by Buffer Type. 382 */ 383struct mpt3_diag_query { 384 struct mpt3_ioctl_header hdr; 385 uint8_t reserved; 386 uint8_t buffer_type; 387 uint16_t application_flags; 388 uint32_t diagnostic_flags; 389 uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; 390 uint32_t total_buffer_size; 391 uint32_t driver_added_buffer_size; 392 uint32_t unique_id; 393}; 394 395/** 396 * struct mpt3_diag_release - request to send Diag Release Message to firmware 397 * @hdr - generic header 398 * @unique_id - tag uniquely identifies the buffer to be released 399 * 400 * This allows ownership of the specified buffer to returned to the driver, 401 * allowing an application to read the buffer without fear that firmware is 402 * overwriting information in the buffer. 403 */ 404struct mpt3_diag_release { 405 struct mpt3_ioctl_header hdr; 406 uint32_t unique_id; 407}; 408 409/** 410 * struct mpt3_diag_read_buffer - request for copy of the diag buffer 411 * @hdr - generic header 412 * @status - 413 * @reserved - 414 * @flags - misc flags 415 * @starting_offset - starting offset within drivers buffer where to start 416 * reading data at into the specified application buffer 417 * @bytes_to_read - number of bytes to copy from the drivers buffer into the 418 * application buffer starting at starting_offset. 419 * @unique_id - unique id associated with this buffer. 420 * @diagnostic_data - data payload 421 */ 422struct mpt3_diag_read_buffer { 423 struct mpt3_ioctl_header hdr; 424 uint8_t status; 425 uint8_t reserved; 426 uint16_t flags; 427 uint32_t starting_offset; 428 uint32_t bytes_to_read; 429 uint32_t unique_id; 430 uint32_t diagnostic_data[1]; 431}; 432 433#endif /* MPT3SAS_CTL_H_INCLUDED */ 434