// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/drivers/video/console/sticore.c -
 *      core code for console driver using HP's STI firmware
 *
 *      Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
 *      Copyright (C) 2001-2013 Helge Deller <deller@gmx.de>
 *      Copyright (C) 2001-2002 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 * 
 * TODO:
 * - call STI in virtual mode rather than in real mode
 * - screen blanking with state_mgmt() in text mode STI ? 
 * - try to make it work on m68k hp workstations ;)
 * 
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/font.h>

#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/parisc-device.h>
#include <asm/pdc.h>
#include <asm/cacheflush.h>
#include <asm/grfioctl.h>

#include "../fbdev/sticore.h"

#define STI_DRIVERVERSION "Version 0.9b"

static struct sti_struct *default_sti __read_mostly;

/* number of STI ROMS found and their ptrs to each struct */
static int num_sti_roms __read_mostly;
static struct sti_struct *sti_roms[MAX_STI_ROMS] __read_mostly;


/* The colour indices used by STI are
 *   0 - Black
 *   1 - White
 *   2 - Red
 *   3 - Yellow/Brown
 *   4 - Green
 *   5 - Cyan
 *   6 - Blue
 *   7 - Magenta
 *
 * So we have the same colours as VGA (basically one bit each for R, G, B),
 * but have to translate them, anyway. */

static const u8 col_trans[8] = {
        0, 6, 4, 5,
        2, 7, 3, 1
};

#define c_fg(sti, c) col_trans[((c>> 8) & 7)]
#define c_bg(sti, c) col_trans[((c>>11) & 7)]
#define c_index(sti, c) ((c) & 0xff)

static const struct sti_init_flags default_init_flags = {
        .wait   = STI_WAIT, 
        .reset  = 1,
        .text   = 1, 
        .nontext = 1,
        .no_chg_bet = 1, 
        .no_chg_bei = 1, 
        .init_cmap_tx = 1,
};

static int sti_init_graph(struct sti_struct *sti)
{
        struct sti_init_inptr *inptr = &sti->sti_data->init_inptr;
        struct sti_init_inptr_ext *inptr_ext = &sti->sti_data->init_inptr_ext;
        struct sti_init_outptr *outptr = &sti->sti_data->init_outptr;
        unsigned long flags;
        int ret, err;

        spin_lock_irqsave(&sti->lock, flags);

        memset(inptr, 0, sizeof(*inptr));
        inptr->text_planes = 3; /* # of text planes (max 3 for STI) */
        memset(inptr_ext, 0, sizeof(*inptr_ext));
        inptr->ext_ptr = STI_PTR(inptr_ext);
        outptr->errno = 0;

        ret = sti_call(sti, sti->init_graph, &default_init_flags, inptr,
                outptr, sti->glob_cfg);

        if (ret >= 0)
                sti->text_planes = outptr->text_planes;
        err = outptr->errno;

        spin_unlock_irqrestore(&sti->lock, flags);

        if (ret < 0) {
                pr_err("STI init_graph failed (ret %d, errno %d)\n", ret, err);
                return -1;
        }
        
        return 0;
}

static const struct sti_conf_flags default_conf_flags = {
        .wait   = STI_WAIT,
};

static void sti_inq_conf(struct sti_struct *sti)
{
        struct sti_conf_inptr *inptr = &sti->sti_data->inq_inptr;
        struct sti_conf_outptr *outptr = &sti->sti_data->inq_outptr;
        unsigned long flags;
        s32 ret;

        outptr->ext_ptr = STI_PTR(&sti->sti_data->inq_outptr_ext);
        
        do {
                spin_lock_irqsave(&sti->lock, flags);
                memset(inptr, 0, sizeof(*inptr));
                ret = sti_call(sti, sti->inq_conf, &default_conf_flags,
                        inptr, outptr, sti->glob_cfg);
                spin_unlock_irqrestore(&sti->lock, flags);
        } while (ret == 1);
}

static const struct sti_font_flags default_font_flags = {
        .wait           = STI_WAIT,
        .non_text       = 0,
};

void
sti_putc(struct sti_struct *sti, int c, int y, int x)
{
        struct sti_font_inptr *inptr = &sti->sti_data->font_inptr;
        struct sti_font_inptr inptr_default = {
                .font_start_addr= STI_PTR(sti->font->raw),
                .index          = c_index(sti, c),
                .fg_color       = c_fg(sti, c),
                .bg_color       = c_bg(sti, c),
                .dest_x         = x * sti->font_width,
                .dest_y         = y * sti->font_height,
        };
        struct sti_font_outptr *outptr = &sti->sti_data->font_outptr;
        s32 ret;
        unsigned long flags;

        do {
                spin_lock_irqsave(&sti->lock, flags);
                *inptr = inptr_default;
                ret = sti_call(sti, sti->font_unpmv, &default_font_flags,
                        inptr, outptr, sti->glob_cfg);
                spin_unlock_irqrestore(&sti->lock, flags);
        } while (ret == 1);
}

static const struct sti_blkmv_flags clear_blkmv_flags = {
        .wait   = STI_WAIT, 
        .color  = 1, 
        .clear  = 1, 
};

void
sti_set(struct sti_struct *sti, int src_y, int src_x,
        int height, int width, u8 color)
{
        struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
        struct sti_blkmv_inptr inptr_default = {
                .fg_color       = color,
                .bg_color       = color,
                .src_x          = src_x,
                .src_y          = src_y,
                .dest_x         = src_x,
                .dest_y         = src_y,
                .width          = width,
                .height         = height,
        };
        struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
        s32 ret;
        unsigned long flags;
        
        do {
                spin_lock_irqsave(&sti->lock, flags);
                *inptr = inptr_default;
                ret = sti_call(sti, sti->block_move, &clear_blkmv_flags,
                        inptr, outptr, sti->glob_cfg);
                spin_unlock_irqrestore(&sti->lock, flags);
        } while (ret == 1);
}

void
sti_clear(struct sti_struct *sti, int src_y, int src_x,
          int height, int width, int c)
{
        struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
        struct sti_blkmv_inptr inptr_default = {
                .fg_color       = c_fg(sti, c),
                .bg_color       = c_bg(sti, c),
                .src_x          = src_x * sti->font_width,
                .src_y          = src_y * sti->font_height,
                .dest_x         = src_x * sti->font_width,
                .dest_y         = src_y * sti->font_height,
                .width          = width * sti->font_width,
                .height         = height* sti->font_height,
        };
        struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
        s32 ret;
        unsigned long flags;

        do {
                spin_lock_irqsave(&sti->lock, flags);
                *inptr = inptr_default;
                ret = sti_call(sti, sti->block_move, &clear_blkmv_flags,
                        inptr, outptr, sti->glob_cfg);
                spin_unlock_irqrestore(&sti->lock, flags);
        } while (ret == 1);
}

static const struct sti_blkmv_flags default_blkmv_flags = {
        .wait = STI_WAIT, 
};

void
sti_bmove(struct sti_struct *sti, int src_y, int src_x,
          int dst_y, int dst_x, int height, int width)
{
        struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
        struct sti_blkmv_inptr inptr_default = {
                .src_x          = src_x * sti->font_width,
                .src_y          = src_y * sti->font_height,
                .dest_x         = dst_x * sti->font_width,
                .dest_y         = dst_y * sti->font_height,
                .width          = width * sti->font_width,
                .height         = height* sti->font_height,
        };
        struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
        s32 ret;
        unsigned long flags;

        do {
                spin_lock_irqsave(&sti->lock, flags);
                *inptr = inptr_default;
                ret = sti_call(sti, sti->block_move, &default_blkmv_flags,
                        inptr, outptr, sti->glob_cfg);
                spin_unlock_irqrestore(&sti->lock, flags);
        } while (ret == 1);
}


static void sti_flush(unsigned long start, unsigned long end)
{
        flush_icache_range(start, end);
}

static void sti_rom_copy(unsigned long base, unsigned long count, void *dest)
{
        unsigned long dest_start = (unsigned long) dest;

        /* this still needs to be revisited (see arch/parisc/mm/init.c:246) ! */
        while (count >= 4) {
                count -= 4;
                *(u32 *)dest = gsc_readl(base);
                base += 4;
                dest += 4;
        }
        while (count) {
                count--;
                *(u8 *)dest = gsc_readb(base);
                base++;
                dest++;
        }

        sti_flush(dest_start, (unsigned long)dest);
}




static char default_sti_path[21] __read_mostly;

#ifndef MODULE
static int __init sti_setup(char *str)
{
        if (str)
                strlcpy (default_sti_path, str, sizeof (default_sti_path));
        
        return 1;
}

/*      Assuming the machine has multiple STI consoles (=graphic cards) which
 *      all get detected by sticon, the user may define with the linux kernel
 *      parameter sti=<x> which of them will be the initial boot-console.
 *      <x> is a number between 0 and MAX_STI_ROMS, with 0 as the default 
 *      STI screen.
 */
__setup("sti=", sti_setup);
#endif



static char *font_name[MAX_STI_ROMS];
static int font_index[MAX_STI_ROMS],
           font_height[MAX_STI_ROMS],
           font_width[MAX_STI_ROMS];
#ifndef MODULE
static int sti_font_setup(char *str)
{
        char *x;
        int i = 0;

        /* we accept sti_font=VGA8x16, sti_font=10x20, sti_font=10*20 
         * or sti_font=7 style command lines. */

        while (i<MAX_STI_ROMS && str && *str) {
                if (*str>='0' && *str<='9') {
                        if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) {
                                font_height[i] = simple_strtoul(str, NULL, 0);
                                font_width[i] = simple_strtoul(x+1, NULL, 0);
                        } else {
                                font_index[i] = simple_strtoul(str, NULL, 0);
                        }
                } else {
                        font_name[i] = str;     /* fb font name */
                }

                if ((x = strchr(str, ',')))
                        *x++ = 0;
                str = x;

                i++;
        }

        return 1;
}

/*      The optional linux kernel parameter "sti_font" defines which font
 *      should be used by the sticon driver to draw characters to the screen.
 *      Possible values are:
 *      - sti_font=<fb_fontname>:
 *              <fb_fontname> is the name of one of the linux-kernel built-in 
 *              framebuffer font names (e.g. VGA8x16, SUN22x18). 
 *              This is only available if the fonts have been statically compiled 
 *              in with e.g. the CONFIG_FONT_8x16 or CONFIG_FONT_SUN12x22 options.
 *      - sti_font=<number>
 *              most STI ROMs have built-in HP specific fonts, which can be selected
 *              by giving the desired number to the sticon driver. 
 *              NOTE: This number is machine and STI ROM dependend.
 *      - sti_font=<height>x<width>  (e.g. sti_font=16x8)
 *              <height> and <width> gives hints to the height and width of the
 *              font which the user wants. The sticon driver will try to use
 *              a font with this height and width, but if no suitable font is
 *              found, sticon will use the default 8x8 font.
 */
__setup("sti_font=", sti_font_setup);
#endif


        
static void sti_dump_globcfg(struct sti_glob_cfg *glob_cfg,
                             unsigned int sti_mem_request)
{
        struct sti_glob_cfg_ext *cfg;
        
        DPRINTK((KERN_INFO
                "%d text planes\n"
                "%4d x %4d screen resolution\n"
                "%4d x %4d offscreen\n"
                "%4d x %4d layout\n"
                "regions at %08x %08x %08x %08x\n"
                "regions at %08x %08x %08x %08x\n"
                "reent_lvl %d\n"
                "save_addr %08x\n",
                glob_cfg->text_planes,
                glob_cfg->onscreen_x, glob_cfg->onscreen_y,
                glob_cfg->offscreen_x, glob_cfg->offscreen_y,
                glob_cfg->total_x, glob_cfg->total_y,
                glob_cfg->region_ptrs[0], glob_cfg->region_ptrs[1],
                glob_cfg->region_ptrs[2], glob_cfg->region_ptrs[3],
                glob_cfg->region_ptrs[4], glob_cfg->region_ptrs[5],
                glob_cfg->region_ptrs[6], glob_cfg->region_ptrs[7],
                glob_cfg->reent_lvl,
                glob_cfg->save_addr));

        /* dump extended cfg */ 
        cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
        DPRINTK(( KERN_INFO
                "monitor %d\n"
                "in friendly mode: %d\n"
                "power consumption %d watts\n"
                "freq ref %d\n"
                "sti_mem_addr %08x (size=%d bytes)\n",
                cfg->curr_mon,
                cfg->friendly_boot,
                cfg->power,
                cfg->freq_ref,
                cfg->sti_mem_addr, sti_mem_request));
}

static void sti_dump_outptr(struct sti_struct *sti)
{
        DPRINTK((KERN_INFO
                "%d bits per pixel\n"
                "%d used bits\n"
                "%d planes\n"
                "attributes %08x\n",
                 sti->sti_data->inq_outptr.bits_per_pixel,
                 sti->sti_data->inq_outptr.bits_used,
                 sti->sti_data->inq_outptr.planes,
                 sti->sti_data->inq_outptr.attributes));
}

static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
                             unsigned long hpa)
{
        struct sti_glob_cfg *glob_cfg;
        struct sti_glob_cfg_ext *glob_cfg_ext;
        void *save_addr;
        void *sti_mem_addr;
        int i, size;

        if (sti->sti_mem_request < 256)
                sti->sti_mem_request = 256; /* STI default */

        size = sizeof(struct sti_all_data) + sti->sti_mem_request - 256;

        sti->sti_data = kzalloc(size, STI_LOWMEM);
        if (!sti->sti_data)
                return -ENOMEM;

        glob_cfg        = &sti->sti_data->glob_cfg;
        glob_cfg_ext    = &sti->sti_data->glob_cfg_ext;
        save_addr       = &sti->sti_data->save_addr;
        sti_mem_addr    = &sti->sti_data->sti_mem_addr;

        glob_cfg->ext_ptr = STI_PTR(glob_cfg_ext);
        glob_cfg->save_addr = STI_PTR(save_addr);
        for (i=0; i<8; i++) {
                unsigned long newhpa, len;
               
                if (sti->pd) {
                        unsigned char offs = sti->rm_entry[i];
                                
                        if (offs == 0)
                                continue;
                        if (offs != PCI_ROM_ADDRESS &&
                            (offs < PCI_BASE_ADDRESS_0 ||
                             offs > PCI_BASE_ADDRESS_5)) {
                                printk (KERN_WARNING
                                        "STI pci region mapping for region %d (%02x) can't be mapped\n",
                                        i,sti->rm_entry[i]);
                                continue;
                        }
                        newhpa = pci_resource_start (sti->pd, (offs - PCI_BASE_ADDRESS_0) / 4);
                } else
                        newhpa = (i == 0) ? rom_address : hpa;

                sti->regions_phys[i] =
                        REGION_OFFSET_TO_PHYS(sti->regions[i], newhpa);
                
                len = sti->regions[i].region_desc.length * 4096;
                if (len)
                        glob_cfg->region_ptrs[i] = sti->regions_phys[i];
                
                DPRINTK(("region #%d: phys %08lx, region_ptr %08x, len=%lukB, "
                         "btlb=%d, sysonly=%d, cache=%d, last=%d\n",
                        i, sti->regions_phys[i], glob_cfg->region_ptrs[i],
                        len/1024,
                        sti->regions[i].region_desc.btlb,
                        sti->regions[i].region_desc.sys_only,
                        sti->regions[i].region_desc.cache, 
                        sti->regions[i].region_desc.last));

                /* last entry reached ? */
                if (sti->regions[i].region_desc.last)
                        break;
        }

        if (++i<8 && sti->regions[i].region)
                printk(KERN_WARNING "%s: *future ptr (0x%8x) not yet supported !\n",
                                __FILE__, sti->regions[i].region);

        glob_cfg_ext->sti_mem_addr = STI_PTR(sti_mem_addr);

        sti->glob_cfg = glob_cfg;
        
        return 0;
}

#ifdef CONFIG_FONT_SUPPORT
static struct sti_cooked_font *
sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
{
        const struct font_desc *fbfont = NULL;
        unsigned int size, bpc;
        void *dest;
        struct sti_rom_font *nf;
        struct sti_cooked_font *cooked_font;
        
        if (fbfont_name && strlen(fbfont_name))
                fbfont = find_font(fbfont_name);
        if (!fbfont)
                fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0);
        if (!fbfont)
                return NULL;

        pr_info("STI selected %dx%d framebuffer font %s for sticon\n",
                        fbfont->width, fbfont->height, fbfont->name);
                        
        bpc = ((fbfont->width+7)/8) * fbfont->height; 
        size = bpc * 256;
        size += sizeof(struct sti_rom_font);

        nf = kzalloc(size, STI_LOWMEM);
        if (!nf)
                return NULL;

        nf->first_char = 0;
        nf->last_char = 255;
        nf->width = fbfont->width;
        nf->height = fbfont->height;
        nf->font_type = STI_FONT_HPROMAN8;
        nf->bytes_per_char = bpc;
        nf->next_font = 0;
        nf->underline_height = 1;
        nf->underline_pos = fbfont->height - nf->underline_height;

        dest = nf;
        dest += sizeof(struct sti_rom_font);
        memcpy(dest, fbfont->data, bpc*256);

        cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
        if (!cooked_font) {
                kfree(nf);
                return NULL;
        }
        
        cooked_font->raw = nf;
        cooked_font->next_font = NULL;

        cooked_rom->font_start = cooked_font;

        return cooked_font;
}
#else
static struct sti_cooked_font *
sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
{
        return NULL;
}
#endif

static struct sti_cooked_font *sti_select_font(struct sti_cooked_rom *rom,
                int (*search_font_fnc)(struct sti_cooked_rom *, int, int))
{
        struct sti_cooked_font *font;
        int i;
        int index = num_sti_roms;

        /* check for framebuffer-font first */
        if ((font = sti_select_fbfont(rom, font_name[index])))
                return font;

        if (font_width[index] && font_height[index])
                font_index[index] = search_font_fnc(rom, 
                                font_height[index], font_width[index]);

        for (font = rom->font_start, i = font_index[index];
            font && (i > 0);
            font = font->next_font, i--);

        if (font)
                return font;
        else
                return rom->font_start;
}


static void sti_dump_rom(struct sti_rom *rom)
{
        printk(KERN_INFO "    id %04x-%04x, conforms to spec rev. %d.%02x\n",
                rom->graphics_id[0], 
                rom->graphics_id[1],
                rom->revno[0] >> 4, 
                rom->revno[0] & 0x0f);
        DPRINTK(("      supports %d monitors\n", rom->num_mons));
        DPRINTK(("      font start %08x\n", rom->font_start));
        DPRINTK(("      region list %08x\n", rom->region_list));
        DPRINTK(("      init_graph %08x\n", rom->init_graph));
        DPRINTK(("      bus support %02x\n", rom->bus_support));
        DPRINTK(("      ext bus support %02x\n", rom->ext_bus_support));
        DPRINTK(("      alternate code type %d\n", rom->alt_code_type));
}


static int sti_cook_fonts(struct sti_cooked_rom *cooked_rom,
                          struct sti_rom *raw_rom)
{
        struct sti_rom_font *raw_font, *font_start;
        struct sti_cooked_font *cooked_font;
        
        cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
        if (!cooked_font)
                return 0;

        cooked_rom->font_start = cooked_font;

        raw_font = ((void *)raw_rom) + (raw_rom->font_start);

        font_start = raw_font;
        cooked_font->raw = raw_font;

        while (raw_font->next_font) {
                raw_font = ((void *)font_start) + (raw_font->next_font);

                cooked_font->next_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
                if (!cooked_font->next_font)
                        return 1;

                cooked_font = cooked_font->next_font;

                cooked_font->raw = raw_font;
        }

        cooked_font->next_font = NULL;
        return 1;
}


static int sti_search_font(struct sti_cooked_rom *rom, int height, int width)
{
        struct sti_cooked_font *font;
        int i = 0;
        
        for (font = rom->font_start; font; font = font->next_font, i++) {
                if ((font->raw->width == width) &&
                    (font->raw->height == height))
                        return i;
        }
        return 0;
}

#define BMODE_RELOCATE(offset)          offset = (offset) / 4;
#define BMODE_LAST_ADDR_OFFS            0x50

static void *sti_bmode_font_raw(struct sti_cooked_font *f)
{
        unsigned char *n, *p, *q;
        int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font);
        
        n = kcalloc(4, size, STI_LOWMEM);
        if (!n)
                return NULL;
        p = n + 3;
        q = (unsigned char *)f->raw;
        while (size--) {
                *p = *q++;
                p+=4;
        }
        return n + 3;
}

static void sti_bmode_rom_copy(unsigned long base, unsigned long count,
                               void *dest)
{
        unsigned long dest_start = (unsigned long) dest;

        while (count) {
                count--;
                *(u8 *)dest = gsc_readl(base);
                base += 4;
                dest++;
        }

        sti_flush(dest_start, (unsigned long)dest);
}

static struct sti_rom *sti_get_bmode_rom (unsigned long address)
{
        struct sti_rom *raw;
        u32 size;
        struct sti_rom_font *raw_font, *font_start;

        sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size);

        size = (size+3) / 4;
        raw = kmalloc(size, STI_LOWMEM);
        if (raw) {
                sti_bmode_rom_copy(address, size, raw);
                memmove (&raw->res004, &raw->type[0], 0x3c);
                raw->type[3] = raw->res004;

                BMODE_RELOCATE (raw->region_list);
                BMODE_RELOCATE (raw->font_start);

                BMODE_RELOCATE (raw->init_graph);
                BMODE_RELOCATE (raw->state_mgmt);
                BMODE_RELOCATE (raw->font_unpmv);
                BMODE_RELOCATE (raw->block_move);
                BMODE_RELOCATE (raw->inq_conf);

                raw_font = ((void *)raw) + raw->font_start;
                font_start = raw_font;
                
                while (raw_font->next_font) {
                        BMODE_RELOCATE (raw_font->next_font);
                        raw_font = ((void *)font_start) + raw_font->next_font;
                }
        }
        return raw;
}

static struct sti_rom *sti_get_wmode_rom(unsigned long address)
{
        struct sti_rom *raw;
        unsigned long size;

        /* read the ROM size directly from the struct in ROM */ 
        size = gsc_readl(address + offsetof(struct sti_rom,last_addr));

        raw = kmalloc(size, STI_LOWMEM);
        if (raw)
                sti_rom_copy(address, size, raw);

        return raw;
}

static int sti_read_rom(int wordmode, struct sti_struct *sti,
                        unsigned long address)
{
        struct sti_cooked_rom *cooked;
        struct sti_rom *raw = NULL;
        unsigned long revno;

        cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
        if (!cooked)
                goto out_err;

        if (wordmode)
                raw = sti_get_wmode_rom (address);
        else
                raw = sti_get_bmode_rom (address);

        if (!raw)
                goto out_err;

        if (!sti_cook_fonts(cooked, raw)) {
                printk(KERN_ERR "No font found for STI at %08lx\n", address);
                goto out_err;
        }

        if (raw->region_list)
                memcpy(sti->regions, ((void *)raw)+raw->region_list, sizeof(sti->regions));

        address = (unsigned long) STI_PTR(raw);

        pr_info("STI ROM supports 32 %sbit firmware functions.\n",
                raw->alt_code_type == ALT_CODE_TYPE_PA_RISC_64
                ? "and 64 " : "");

        sti->font_unpmv = address + (raw->font_unpmv & 0x03ffffff);
        sti->block_move = address + (raw->block_move & 0x03ffffff);
        sti->init_graph = address + (raw->init_graph & 0x03ffffff);
        sti->inq_conf   = address + (raw->inq_conf   & 0x03ffffff);

        sti->rom = cooked;
        sti->rom->raw = raw;
        
        sti->font = sti_select_font(sti->rom, sti_search_font);
        sti->font_width = sti->font->raw->width;
        sti->font_height = sti->font->raw->height;
        if (!wordmode)
                sti->font->raw = sti_bmode_font_raw(sti->font);

        sti->sti_mem_request = raw->sti_mem_req;
        sti->graphics_id[0] = raw->graphics_id[0];
        sti->graphics_id[1] = raw->graphics_id[1];
        
        sti_dump_rom(raw);

        /* check if the ROM routines in this card are compatible */
        if (wordmode || sti->graphics_id[1] != 0x09A02587)
                goto ok;

        revno = (raw->revno[0] << 8) | raw->revno[1];

        switch (sti->graphics_id[0]) {
        case S9000_ID_HCRX:
                /* HyperA or HyperB ? */
                if (revno == 0x8408 || revno == 0x840b)
                        goto msg_not_supported;
                break;
        case CRT_ID_THUNDER:
                if (revno == 0x8509)
                        goto msg_not_supported;
                break;
        case CRT_ID_THUNDER2:
                if (revno == 0x850c)
                        goto msg_not_supported;
        }
ok:
        return 1;

msg_not_supported:
        printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
        printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
                        "graphics-howto.html for more info.\n");
        /* fall through */
out_err:
        kfree(raw);
        kfree(cooked);
        return 0;
}

static struct sti_struct *sti_try_rom_generic(unsigned long address,
                                              unsigned long hpa,
                                              struct pci_dev *pd)
{
        struct sti_struct *sti;
        int ok;
        u32 sig;

        if (num_sti_roms >= MAX_STI_ROMS) {
                printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
                return NULL;
        }
        
        sti = kzalloc(sizeof(*sti), GFP_KERNEL);
        if (!sti)
                return NULL;

        spin_lock_init(&sti->lock);

test_rom:
        /* if we can't read the ROM, bail out early.  Not being able
         * to read the hpa is okay, for romless sti */
        if (pdc_add_valid(address))
                goto out_err;

        sig = gsc_readl(address);

        /* check for a PCI ROM structure */
        if ((le32_to_cpu(sig)==0xaa55)) {
                unsigned int i, rm_offset;
                u32 *rm;
                i = gsc_readl(address+0x04);
                if (i != 1) {
                        /* The ROM could have multiple architecture 
                         * dependent images (e.g. i386, parisc,...) */
                        printk(KERN_WARNING 
                                "PCI ROM is not a STI ROM type image (0x%8x)\n", i);
                        goto out_err;
                }
                
                sti->pd = pd;

                i = gsc_readl(address+0x0c);
                DPRINTK(("PCI ROM size (from header) = %d kB\n",
                        le16_to_cpu(i>>16)*512/1024));
                rm_offset = le16_to_cpu(i & 0xffff);
                if (rm_offset) { 
                        /* read 16 bytes from the pci region mapper array */
                        rm = (u32*) &sti->rm_entry;
                        *rm++ = gsc_readl(address+rm_offset+0x00);
                        *rm++ = gsc_readl(address+rm_offset+0x04);
                        *rm++ = gsc_readl(address+rm_offset+0x08);
                        *rm++ = gsc_readl(address+rm_offset+0x0c);
                        DPRINTK(("PCI region Mapper offset = %08x: ",
                                rm_offset));
                        for (i=0; i<16; i++)
                                DPRINTK(("%02x ", sti->rm_entry[i]));
                        DPRINTK(("\n"));
                }

                address += le32_to_cpu(gsc_readl(address+8));
                DPRINTK(("sig %04x, PCI STI ROM at %08lx\n", sig, address));
                goto test_rom;
        }
        
        ok = 0;
        
        if ((sig & 0xff) == 0x01) {
                DPRINTK(("    byte mode ROM at %08lx, hpa at %08lx\n",
                       address, hpa));
                ok = sti_read_rom(0, sti, address);
        }

        if ((sig & 0xffff) == 0x0303) {
                DPRINTK(("    word mode ROM at %08lx, hpa at %08lx\n",
                       address, hpa));
                ok = sti_read_rom(1, sti, address);
        }

        if (!ok)
                goto out_err;

        if (sti_init_glob_cfg(sti, address, hpa))
                goto out_err; /* not enough memory */

        /* disable STI PCI ROM. ROM and card RAM overlap and
         * leaving it enabled would force HPMCs
         */
        if (sti->pd) {
                unsigned long rom_base;
                rom_base = pci_resource_start(sti->pd, PCI_ROM_RESOURCE);       
                pci_write_config_dword(sti->pd, PCI_ROM_ADDRESS, rom_base & ~PCI_ROM_ADDRESS_ENABLE);
                DPRINTK((KERN_DEBUG "STI PCI ROM disabled\n"));
        }

        if (sti_init_graph(sti))
                goto out_err;

        sti_inq_conf(sti);
        sti_dump_globcfg(sti->glob_cfg, sti->sti_mem_request);
        sti_dump_outptr(sti);
        
        pr_info("    graphics card name: %s\n",
                sti->sti_data->inq_outptr.dev_name);

        sti_roms[num_sti_roms] = sti;
        num_sti_roms++;
        
        return sti;

out_err:
        kfree(sti);
        return NULL;
}

static void sticore_check_for_default_sti(struct sti_struct *sti, char *path)
{
        if (strcmp (path, default_sti_path) == 0)
                default_sti = sti;
}

/*
 * on newer systems PDC gives the address of the ROM 
 * in the additional address field addr[1] while on
 * older Systems the PDC stores it in page0->proc_sti 
 */
static int __init sticore_pa_init(struct parisc_device *dev)
{
        char pa_path[21];
        struct sti_struct *sti = NULL;
        int hpa = dev->hpa.start;

        if (dev->num_addrs && dev->addr[0])
                sti = sti_try_rom_generic(dev->addr[0], hpa, NULL);
        if (!sti)
                sti = sti_try_rom_generic(hpa, hpa, NULL);
        if (!sti)
                sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL);
        if (!sti)
                return 1;

        print_pa_hwpath(dev, pa_path);
        sticore_check_for_default_sti(sti, pa_path);
        return 0;
}


static int sticore_pci_init(struct pci_dev *pd, const struct pci_device_id *ent)
{
#ifdef CONFIG_PCI
        unsigned long fb_base, rom_base;
        unsigned int fb_len, rom_len;
        int err;
        struct sti_struct *sti;
        
        err = pci_enable_device(pd);
        if (err < 0) {
                dev_err(&pd->dev, "Cannot enable PCI device\n");
                return err;
        }

        fb_base = pci_resource_start(pd, 0);
        fb_len = pci_resource_len(pd, 0);
        rom_base = pci_resource_start(pd, PCI_ROM_RESOURCE);
        rom_len = pci_resource_len(pd, PCI_ROM_RESOURCE);
        if (rom_base) {
                pci_write_config_dword(pd, PCI_ROM_ADDRESS, rom_base | PCI_ROM_ADDRESS_ENABLE);
                DPRINTK((KERN_DEBUG "STI PCI ROM enabled at 0x%08lx\n", rom_base));
        }

        printk(KERN_INFO "STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n",
                rom_base, rom_len/1024, fb_base, fb_len/1024/1024);

        DPRINTK((KERN_DEBUG "Trying PCI STI ROM at %08lx, PCI hpa at %08lx\n",
                    rom_base, fb_base));

        sti = sti_try_rom_generic(rom_base, fb_base, pd);
        if (sti) {
                char pa_path[30];
                print_pci_hwpath(pd, pa_path);
                sticore_check_for_default_sti(sti, pa_path);
        }
        
        if (!sti) {

                printk(KERN_WARNING "Unable to handle STI device '%s'\n",
                        pci_name(pd));
                return -ENODEV;
        }
#endif /* CONFIG_PCI */

        return 0;
}


static void __exit sticore_pci_remove(struct pci_dev *pd)
{
        BUG();
}


static struct pci_device_id sti_pci_tbl[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_EG) },
        { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX6) },
        { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX4) },
        { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FX2) },
        { PCI_DEVICE(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_VISUALIZE_FXE) },
        { 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, sti_pci_tbl);

static struct pci_driver pci_sti_driver = {
        .name           = "sti",
        .id_table       = sti_pci_tbl,
        .probe          = sticore_pci_init,
        .remove         = __exit_p(sticore_pci_remove),
};

static struct parisc_device_id sti_pa_tbl[] = {
        { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00077 },
        { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00085 },
        { 0, }
};
MODULE_DEVICE_TABLE(parisc, sti_pa_tbl);

static struct parisc_driver pa_sti_driver __refdata = {
        .name           = "sti",
        .id_table       = sti_pa_tbl,
        .probe          = sticore_pa_init,
};


/*
 * sti_init_roms() - detects all STI ROMs and stores them in sti_roms[]
 */

static int sticore_initialized __read_mostly;

static void sti_init_roms(void)
{
        if (sticore_initialized)
                return;

        sticore_initialized = 1;

        printk(KERN_INFO "STI GSC/PCI core graphics driver "
                        STI_DRIVERVERSION "\n");

        /* Register drivers for native & PCI cards */
        register_parisc_driver(&pa_sti_driver);
        WARN_ON(pci_register_driver(&pci_sti_driver));

        /* if we didn't find the given default sti, take the first one */
        if (!default_sti)
                default_sti = sti_roms[0];

}

/*
 * index = 0 gives default sti
 * index > 0 gives other stis in detection order
 */
struct sti_struct * sti_get_rom(unsigned int index)
{
        if (!sticore_initialized)
                sti_init_roms();

        if (index == 0)
                return default_sti;

        if (index > num_sti_roms)
                return NULL;

        return sti_roms[index-1];
}
EXPORT_SYMBOL(sti_get_rom);


int sti_call(const struct sti_struct *sti, unsigned long func,
                const void *flags, void *inptr, void *outptr,
                struct sti_glob_cfg *glob_cfg)
{
        unsigned long _flags = STI_PTR(flags);
        unsigned long _inptr = STI_PTR(inptr);
        unsigned long _outptr = STI_PTR(outptr);
        unsigned long _glob_cfg = STI_PTR(glob_cfg);
        int ret;

#ifdef CONFIG_64BIT
        /* Check for overflow when using 32bit STI on 64bit kernel. */
        if (WARN_ONCE(_flags>>32 || _inptr>>32 || _outptr>>32 || _glob_cfg>>32,
                        "Out of 32bit-range pointers!"))
                return -1;
#endif

        ret = pdc_sti_call(func, _flags, _inptr, _outptr, _glob_cfg);

        return ret;
}

MODULE_AUTHOR("Philipp Rumpf, Helge Deller, Thomas Bogendoerfer");
MODULE_DESCRIPTION("Core STI driver for HP's NGLE series graphics cards in HP PARISC machines");
MODULE_LICENSE("GPL v2");