LXR linux/include/sound/ak4114.h

   1/* SPDX-License-Identifier: GPL-2.0-or-later */
   2#ifndef __SOUND_AK4114_H
   3#define __SOUND_AK4114_H
   4
   5/*
   6 *  Routines for Asahi Kasei AK4114
   7 *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
   8 */
   9
  10/* AK4114 registers */
  11#define AK4114_REG_PWRDN        0x00    /* power down */
  12#define AK4114_REG_FORMAT       0x01    /* format control */
  13#define AK4114_REG_IO0          0x02    /* input/output control */
  14#define AK4114_REG_IO1          0x03    /* input/output control */
  15#define AK4114_REG_INT0_MASK    0x04    /* interrupt0 mask */
  16#define AK4114_REG_INT1_MASK    0x05    /* interrupt1 mask */
  17#define AK4114_REG_RCS0         0x06    /* receiver status 0 */
  18#define AK4114_REG_RCS1         0x07    /* receiver status 1 */
  19#define AK4114_REG_RXCSB0       0x08    /* RX channel status byte 0 */
  20#define AK4114_REG_RXCSB1       0x09    /* RX channel status byte 1 */
  21#define AK4114_REG_RXCSB2       0x0a    /* RX channel status byte 2 */
  22#define AK4114_REG_RXCSB3       0x0b    /* RX channel status byte 3 */
  23#define AK4114_REG_RXCSB4       0x0c    /* RX channel status byte 4 */
  24#define AK4114_REG_TXCSB0       0x0d    /* TX channel status byte 0 */
  25#define AK4114_REG_TXCSB1       0x0e    /* TX channel status byte 1 */
  26#define AK4114_REG_TXCSB2       0x0f    /* TX channel status byte 2 */
  27#define AK4114_REG_TXCSB3       0x10    /* TX channel status byte 3 */
  28#define AK4114_REG_TXCSB4       0x11    /* TX channel status byte 4 */
  29#define AK4114_REG_Pc0          0x12    /* burst preamble Pc byte 0 */
  30#define AK4114_REG_Pc1          0x13    /* burst preamble Pc byte 1 */
  31#define AK4114_REG_Pd0          0x14    /* burst preamble Pd byte 0 */
  32#define AK4114_REG_Pd1          0x15    /* burst preamble Pd byte 1 */
  33#define AK4114_REG_QSUB_ADDR    0x16    /* Q-subcode address + control */
  34#define AK4114_REG_QSUB_TRACK   0x17    /* Q-subcode track */
  35#define AK4114_REG_QSUB_INDEX   0x18    /* Q-subcode index */
  36#define AK4114_REG_QSUB_MINUTE  0x19    /* Q-subcode minute */
  37#define AK4114_REG_QSUB_SECOND  0x1a    /* Q-subcode second */
  38#define AK4114_REG_QSUB_FRAME   0x1b    /* Q-subcode frame */
  39#define AK4114_REG_QSUB_ZERO    0x1c    /* Q-subcode zero */
  40#define AK4114_REG_QSUB_ABSMIN  0x1d    /* Q-subcode absolute minute */
  41#define AK4114_REG_QSUB_ABSSEC  0x1e    /* Q-subcode absolute second */
  42#define AK4114_REG_QSUB_ABSFRM  0x1f    /* Q-subcode absolute frame */
  43
  44/* sizes */
  45#define AK4114_REG_RXCSB_SIZE   ((AK4114_REG_RXCSB4-AK4114_REG_RXCSB0)+1)
  46#define AK4114_REG_TXCSB_SIZE   ((AK4114_REG_TXCSB4-AK4114_REG_TXCSB0)+1)
  47#define AK4114_REG_QSUB_SIZE    ((AK4114_REG_QSUB_ABSFRM-AK4114_REG_QSUB_ADDR)+1)
  48
  49/* AK4117_REG_PWRDN bits */
  50#define AK4114_CS12             (1<<7)  /* Channel Status Select */
  51#define AK4114_BCU              (1<<6)  /* Block Start & C/U Output Mode */
  52#define AK4114_CM1              (1<<5)  /* Master Clock Operation Select */
  53#define AK4114_CM0              (1<<4)  /* Master Clock Operation Select */
  54#define AK4114_OCKS1            (1<<3)  /* Master Clock Frequency Select */
  55#define AK4114_OCKS0            (1<<2)  /* Master Clock Frequency Select */
  56#define AK4114_PWN              (1<<1)  /* 0 = power down, 1 = normal operation */
  57#define AK4114_RST              (1<<0)  /* 0 = reset & initialize (except this register), 1 = normal operation */
  58
  59/* AK4114_REQ_FORMAT bits */
  60#define AK4114_MONO             (1<<7)  /* Double Sampling Frequency Mode: 0 = stereo, 1 = mono */
  61#define AK4114_DIF2             (1<<6)  /* Audio Data Control */
  62#define AK4114_DIF1             (1<<5)  /* Audio Data Control */
  63#define AK4114_DIF0             (1<<4)  /* Audio Data Control */
  64#define AK4114_DIF_16R          (0)                             /* STDO: 16-bit, right justified */
  65#define AK4114_DIF_18R          (AK4114_DIF0)                   /* STDO: 18-bit, right justified */
  66#define AK4114_DIF_20R          (AK4114_DIF1)                   /* STDO: 20-bit, right justified */
  67#define AK4114_DIF_24R          (AK4114_DIF1|AK4114_DIF0)       /* STDO: 24-bit, right justified */
  68#define AK4114_DIF_24L          (AK4114_DIF2)                   /* STDO: 24-bit, left justified */
  69#define AK4114_DIF_24I2S        (AK4114_DIF2|AK4114_DIF0)       /* STDO: I2S */
  70#define AK4114_DIF_I24L         (AK4114_DIF2|AK4114_DIF1)       /* STDO: 24-bit, left justified; LRCLK, BICK = Input */
  71#define AK4114_DIF_I24I2S       (AK4114_DIF2|AK4114_DIF1|AK4114_DIF0) /* STDO: I2S;  LRCLK, BICK = Input */
  72#define AK4114_DEAU             (1<<3)  /* Deemphasis Autodetect Enable (1 = enable) */
  73#define AK4114_DEM1             (1<<2)  /* 32kHz-48kHz Deemphasis Control */
  74#define AK4114_DEM0             (1<<1)  /* 32kHz-48kHz Deemphasis Control */
  75#define AK4114_DEM_44KHZ        (0)
  76#define AK4114_DEM_48KHZ        (AK4114_DEM1)
  77#define AK4114_DEM_32KHZ        (AK4114_DEM0|AK4114_DEM1)
  78#define AK4114_DEM_96KHZ        (AK4114_DEM1)   /* DFS must be set */
  79#define AK4114_DFS              (1<<0)  /* 96kHz Deemphasis Control */
  80
  81/* AK4114_REG_IO0 */
  82#define AK4114_TX1E             (1<<7)  /* TX1 Output Enable (1 = enable) */
  83#define AK4114_OPS12            (1<<6)  /* Output Data Selector for TX1 pin */
  84#define AK4114_OPS11            (1<<5)  /* Output Data Selector for TX1 pin */
  85#define AK4114_OPS10            (1<<4)  /* Output Data Selector for TX1 pin */
  86#define AK4114_TX0E             (1<<3)  /* TX0 Output Enable (1 = enable) */
  87#define AK4114_OPS02            (1<<2)  /* Output Data Selector for TX0 pin */
  88#define AK4114_OPS01            (1<<1)  /* Output Data Selector for TX0 pin */
  89#define AK4114_OPS00            (1<<0)  /* Output Data Selector for TX0 pin */
  90
  91/* AK4114_REG_IO1 */
  92#define AK4114_EFH1             (1<<7)  /* Interrupt 0 pin Hold */
  93#define AK4114_EFH0             (1<<6)  /* Interrupt 0 pin Hold */
  94#define AK4114_EFH_512          (0)
  95#define AK4114_EFH_1024         (AK4114_EFH0)
  96#define AK4114_EFH_2048         (AK4114_EFH1)
  97#define AK4114_EFH_4096         (AK4114_EFH1|AK4114_EFH0)
  98#define AK4114_UDIT             (1<<5)  /* U-bit Control for DIT (0 = fixed '0', 1 = recovered) */
  99#define AK4114_TLR              (1<<4)  /* Double Sampling Frequency Select for DIT (0 = L channel, 1 = R channel) */
 100#define AK4114_DIT              (1<<3)  /* TX1 out: 0 = Through Data (RX data), 1 = Transmit Data (DAUX data) */
 101#define AK4114_IPS2             (1<<2)  /* Input Recovery Data Select */
 102#define AK4114_IPS1             (1<<1)  /* Input Recovery Data Select */
 103#define AK4114_IPS0             (1<<0)  /* Input Recovery Data Select */
 104#define AK4114_IPS(x)           ((x)&7)
 105
 106/* AK4114_REG_INT0_MASK && AK4114_REG_INT1_MASK*/
 107#define AK4117_MQI              (1<<7)  /* mask enable for QINT bit */
 108#define AK4117_MAT              (1<<6)  /* mask enable for AUTO bit */
 109#define AK4117_MCI              (1<<5)  /* mask enable for CINT bit */
 110#define AK4117_MUL              (1<<4)  /* mask enable for UNLOCK bit */
 111#define AK4117_MDTS             (1<<3)  /* mask enable for DTSCD bit */
 112#define AK4117_MPE              (1<<2)  /* mask enable for PEM bit */
 113#define AK4117_MAN              (1<<1)  /* mask enable for AUDN bit */
 114#define AK4117_MPR              (1<<0)  /* mask enable for PAR bit */
 115
 116/* AK4114_REG_RCS0 */
 117#define AK4114_QINT             (1<<7)  /* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
 118#define AK4114_AUTO             (1<<6)  /* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
 119#define AK4114_CINT             (1<<5)  /* channel status buffer interrupt, 0 = no change, 1 = change */
 120#define AK4114_UNLCK            (1<<4)  /* PLL lock status, 0 = lock, 1 = unlock */
 121#define AK4114_DTSCD            (1<<3)  /* DTS-CD Detect, 0 = No detect, 1 = Detect */
 122#define AK4114_PEM              (1<<2)  /* Pre-emphasis Detect, 0 = OFF, 1 = ON */
 123#define AK4114_AUDION           (1<<1)  /* audio bit output, 0 = audio, 1 = non-audio */
 124#define AK4114_PAR              (1<<0)  /* parity error or biphase error status, 0 = no error, 1 = error */
 125
 126/* AK4114_REG_RCS1 */
 127#define AK4114_FS3              (1<<7)  /* sampling frequency detection */
 128#define AK4114_FS2              (1<<6)
 129#define AK4114_FS1              (1<<5)
 130#define AK4114_FS0              (1<<4)
 131#define AK4114_FS_44100HZ       (0)
 132#define AK4114_FS_48000HZ       (AK4114_FS1)
 133#define AK4114_FS_32000HZ       (AK4114_FS1|AK4114_FS0)
 134#define AK4114_FS_88200HZ       (AK4114_FS3)
 135#define AK4114_FS_96000HZ       (AK4114_FS3|AK4114_FS1)
 136#define AK4114_FS_176400HZ      (AK4114_FS3|AK4114_FS2)
 137#define AK4114_FS_192000HZ      (AK4114_FS3|AK4114_FS2|AK4114_FS1)
 138#define AK4114_V                (1<<3)  /* Validity of Channel Status, 0 = Valid, 1 = Invalid */
 139#define AK4114_QCRC             (1<<1)  /* CRC for Q-subcode, 0 = no error, 1 = error */
 140#define AK4114_CCRC             (1<<0)  /* CRC for channel status, 0 = no error, 1 = error */
 141
 142/* flags for snd_ak4114_check_rate_and_errors() */
 143#define AK4114_CHECK_NO_STAT    (1<<0)  /* no statistics */
 144#define AK4114_CHECK_NO_RATE    (1<<1)  /* no rate check */
 145
 146#define AK4114_CONTROLS         15
 147
 148typedef void (ak4114_write_t)(void *private_data, unsigned char addr, unsigned char data);
 149typedef unsigned char (ak4114_read_t)(void *private_data, unsigned char addr);
 150
 151enum {
 152        AK4114_PARITY_ERRORS,
 153        AK4114_V_BIT_ERRORS,
 154        AK4114_QCRC_ERRORS,
 155        AK4114_CCRC_ERRORS,
 156        AK4114_NUM_ERRORS
 157};
 158
 159struct ak4114 {
 160        struct snd_card *card;
 161        ak4114_write_t * write;
 162        ak4114_read_t * read;
 163        void * private_data;
 164        atomic_t wq_processing;
 165        struct mutex reinit_mutex;
 166        spinlock_t lock;
 167        unsigned char regmap[6];
 168        unsigned char txcsb[5];
 169        struct snd_kcontrol *kctls[AK4114_CONTROLS];
 170        struct snd_pcm_substream *playback_substream;
 171        struct snd_pcm_substream *capture_substream;
 172        unsigned long errors[AK4114_NUM_ERRORS];
 173        unsigned char rcs0;
 174        unsigned char rcs1;
 175        struct delayed_work work;
 176        unsigned int check_flags;
 177        void *change_callback_private;
 178        void (*change_callback)(struct ak4114 *ak4114, unsigned char c0, unsigned char c1);
 179};
 180
 181int snd_ak4114_create(struct snd_card *card,
 182                      ak4114_read_t *read, ak4114_write_t *write,
 183                      const unsigned char pgm[6], const unsigned char txcsb[5],
 184                      void *private_data, struct ak4114 **r_ak4114);
 185void snd_ak4114_reg_write(struct ak4114 *ak4114, unsigned char reg, unsigned char mask, unsigned char val);
 186void snd_ak4114_reinit(struct ak4114 *ak4114);
 187int snd_ak4114_build(struct ak4114 *ak4114,
 188                     struct snd_pcm_substream *playback_substream,
 189                     struct snd_pcm_substream *capture_substream);
 190int snd_ak4114_external_rate(struct ak4114 *ak4114);
 191int snd_ak4114_check_rate_and_errors(struct ak4114 *ak4114, unsigned int flags);
 192
 193#ifdef CONFIG_PM
 194void snd_ak4114_suspend(struct ak4114 *chip);
 195void snd_ak4114_resume(struct ak4114 *chip);
 196#else
 197static inline void snd_ak4114_suspend(struct ak4114 *chip) {}
 198static inline void snd_ak4114_resume(struct ak4114 *chip) {}
 199#endif
 200
 201#endif /* __SOUND_AK4114_H */
 202
 203