1
2
3
4
5
6
7
8
9
10#include <linux/kernel.h>
11#include <linux/init.h>
12#include <linux/platform_device.h>
13#include <linux/delay.h>
14#include <linux/pwm.h>
15#include <linux/pwm_backlight.h>
16#include <linux/regulator/machine.h>
17#include <linux/regulator/fixed.h>
18#include <linux/input.h>
19#include <linux/gpio.h>
20#include <linux/gpio/machine.h>
21#include <linux/gpio_keys.h>
22#include <linux/leds-lp3944.h>
23#include <linux/platform_data/i2c-pxa.h>
24
25#include <asm/setup.h>
26#include <asm/mach-types.h>
27#include <asm/mach/arch.h>
28
29#include "pxa27x.h"
30#include <linux/platform_data/video-pxafb.h>
31#include <linux/platform_data/usb-ohci-pxa27x.h>
32#include <mach/hardware.h>
33#include <linux/platform_data/keypad-pxa27x.h>
34#include <linux/platform_data/media/camera-pxa.h>
35
36#include "devices.h"
37#include "generic.h"
38
39#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
40
41#define GPIO12_A780_FLIP_LID 12
42#define GPIO15_A1200_FLIP_LID 15
43#define GPIO15_A910_FLIP_LID 15
44#define GPIO12_E680_LOCK_SWITCH 12
45#define GPIO15_E6_LOCK_SWITCH 15
46#define GPIO50_nCAM_EN 50
47#define GPIO19_GEN1_CAM_RST 19
48#define GPIO28_GEN2_CAM_RST 28
49
50static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
51 PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
52 PWM_POLARITY_NORMAL),
53};
54
55static struct platform_pwm_backlight_data ezx_backlight_data = {
56 .max_brightness = 1023,
57 .dft_brightness = 1023,
58};
59
60static struct platform_device ezx_backlight_device = {
61 .name = "pwm-backlight",
62 .dev = {
63 .parent = &pxa27x_device_pwm0.dev,
64 .platform_data = &ezx_backlight_data,
65 },
66};
67
68static struct pxafb_mode_info mode_ezx_old = {
69 .pixclock = 150000,
70 .xres = 240,
71 .yres = 320,
72 .bpp = 16,
73 .hsync_len = 10,
74 .left_margin = 20,
75 .right_margin = 10,
76 .vsync_len = 2,
77 .upper_margin = 3,
78 .lower_margin = 2,
79 .sync = 0,
80};
81
82static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
83 .modes = &mode_ezx_old,
84 .num_modes = 1,
85 .lcd_conn = LCD_COLOR_TFT_16BPP,
86};
87
88static struct pxafb_mode_info mode_72r89803y01 = {
89 .pixclock = 192308,
90 .xres = 240,
91 .yres = 320,
92 .bpp = 32,
93 .depth = 18,
94 .hsync_len = 10,
95 .left_margin = 20,
96 .right_margin = 10,
97 .vsync_len = 2,
98 .upper_margin = 3,
99 .lower_margin = 2,
100 .sync = 0,
101};
102
103static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
104 .modes = &mode_72r89803y01,
105 .num_modes = 1,
106 .lcd_conn = LCD_COLOR_TFT_18BPP,
107};
108
109static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
110 &ezx_backlight_device,
111};
112
113static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
114
115 GPIO16_PWM0_OUT,
116
117
118 GPIO42_BTUART_RXD,
119 GPIO43_BTUART_TXD,
120 GPIO44_BTUART_CTS,
121 GPIO45_BTUART_RTS,
122
123
124 GPIO117_I2C_SCL,
125 GPIO118_I2C_SDA,
126
127
128 GPIO29_SSP1_SCLK,
129 GPIO25_SSP1_TXD,
130 GPIO26_SSP1_RXD,
131 GPIO24_GPIO,
132 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
133 GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,
134 GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,
135
136
137 GPIO32_MMC_CLK,
138 GPIO92_MMC_DAT_0,
139 GPIO109_MMC_DAT_1,
140 GPIO110_MMC_DAT_2,
141 GPIO111_MMC_DAT_3,
142 GPIO112_MMC_CMD,
143 GPIO11_GPIO,
144
145
146 GPIO34_USB_P2_2,
147 GPIO35_USB_P2_1,
148 GPIO36_USB_P2_4,
149 GPIO39_USB_P2_6,
150 GPIO40_USB_P2_5,
151 GPIO53_USB_P2_3,
152
153
154 GPIO30_USB_P3_2,
155 GPIO31_USB_P3_6,
156 GPIO90_USB_P3_5,
157 GPIO91_USB_P3_1,
158 GPIO56_USB_P3_4,
159 GPIO113_USB_P3_3,
160};
161
162#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
163static unsigned long gen1_pin_config[] __initdata = {
164
165 GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
166
167
168 GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,
169 GPIO48_GPIO,
170 GPIO28_GPIO,
171
172
173 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
174 GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,
175 GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,
176 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,
177 GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,
178 GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,
179
180
181 GPIO52_SSP3_SCLK,
182 GPIO83_SSP3_SFRM,
183 GPIO81_SSP3_TXD,
184 GPIO89_SSP3_RXD,
185
186
187 GPIO22_GPIO,
188 GPIO37_GPIO,
189 GPIO38_GPIO,
190 GPIO88_GPIO,
191
192
193 GPIO23_CIF_MCLK,
194 GPIO54_CIF_PCLK,
195 GPIO85_CIF_LV,
196 GPIO84_CIF_FV,
197 GPIO27_CIF_DD_0,
198 GPIO114_CIF_DD_1,
199 GPIO51_CIF_DD_2,
200 GPIO115_CIF_DD_3,
201 GPIO95_CIF_DD_4,
202 GPIO94_CIF_DD_5,
203 GPIO17_CIF_DD_6,
204 GPIO108_CIF_DD_7,
205 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
206 GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,
207
208
209 GPIO120_GPIO,
210 GPIO119_GPIO,
211 GPIO86_GPIO,
212 GPIO87_GPIO,
213};
214#endif
215
216#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
217 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
218static unsigned long gen2_pin_config[] __initdata = {
219
220 GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
221
222
223 GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
224
225
226 GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,
227 GPIO37_GPIO,
228 GPIO57_GPIO,
229
230
231 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
232 GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,
233 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,
234 GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,
235 GPIO41_GPIO,
236
237
238 GPIO52_SSP3_SCLK,
239 GPIO83_SSP3_SFRM,
240 GPIO81_SSP3_TXD,
241 GPIO82_SSP3_RXD,
242
243
244 GPIO22_GPIO,
245 GPIO14_GPIO,
246 GPIO38_GPIO,
247 GPIO88_GPIO,
248
249
250 GPIO23_CIF_MCLK,
251 GPIO54_CIF_PCLK,
252 GPIO85_CIF_LV,
253 GPIO84_CIF_FV,
254 GPIO27_CIF_DD_0,
255 GPIO114_CIF_DD_1,
256 GPIO51_CIF_DD_2,
257 GPIO115_CIF_DD_3,
258 GPIO95_CIF_DD_4,
259 GPIO48_CIF_DD_5,
260 GPIO93_CIF_DD_6,
261 GPIO12_CIF_DD_7,
262 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
263 GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,
264 GPIO17_GPIO,
265};
266#endif
267
268#ifdef CONFIG_MACH_EZX_A780
269static unsigned long a780_pin_config[] __initdata = {
270
271 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
272 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
273 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
274 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
275 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
277 GPIO103_KP_MKOUT_0,
278 GPIO104_KP_MKOUT_1,
279 GPIO105_KP_MKOUT_2,
280 GPIO106_KP_MKOUT_3,
281 GPIO107_KP_MKOUT_4,
282
283
284 GPIO96_GPIO,
285};
286#endif
287
288#ifdef CONFIG_MACH_EZX_E680
289static unsigned long e680_pin_config[] __initdata = {
290
291 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
292 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
293 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
294 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
295 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
296 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
297 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
298 GPIO103_KP_MKOUT_0,
299 GPIO104_KP_MKOUT_1,
300 GPIO105_KP_MKOUT_2,
301 GPIO106_KP_MKOUT_3,
302
303
304 GPIO79_GPIO,
305 GPIO80_GPIO,
306 GPIO78_GPIO,
307 GPIO33_GPIO,
308 GPIO15_GPIO,
309 GPIO49_GPIO,
310 GPIO18_GPIO,
311
312
313 GPIO46_GPIO,
314 GPIO47_GPIO,
315};
316#endif
317
318#ifdef CONFIG_MACH_EZX_A1200
319static unsigned long a1200_pin_config[] __initdata = {
320
321 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
322 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
323 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
324 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
325 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
326 GPIO103_KP_MKOUT_0,
327 GPIO104_KP_MKOUT_1,
328 GPIO105_KP_MKOUT_2,
329 GPIO106_KP_MKOUT_3,
330 GPIO107_KP_MKOUT_4,
331 GPIO108_KP_MKOUT_5,
332};
333#endif
334
335#ifdef CONFIG_MACH_EZX_A910
336static unsigned long a910_pin_config[] __initdata = {
337
338 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
339 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
340 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
341 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
342 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
343 GPIO103_KP_MKOUT_0,
344 GPIO104_KP_MKOUT_1,
345 GPIO105_KP_MKOUT_2,
346 GPIO106_KP_MKOUT_3,
347 GPIO107_KP_MKOUT_4,
348 GPIO108_KP_MKOUT_5,
349
350
351 GPIO89_GPIO,
352 GPIO33_GPIO,
353 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,
354
355
356 GPIO20_GPIO,
357};
358#endif
359
360#ifdef CONFIG_MACH_EZX_E2
361static unsigned long e2_pin_config[] __initdata = {
362
363 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
364 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
365 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
366 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
367 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
368 GPIO103_KP_MKOUT_0,
369 GPIO104_KP_MKOUT_1,
370 GPIO105_KP_MKOUT_2,
371 GPIO106_KP_MKOUT_3,
372 GPIO107_KP_MKOUT_4,
373 GPIO108_KP_MKOUT_5,
374};
375#endif
376
377#ifdef CONFIG_MACH_EZX_E6
378static unsigned long e6_pin_config[] __initdata = {
379
380 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
381 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
382 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
383 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
384 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
385 GPIO103_KP_MKOUT_0,
386 GPIO104_KP_MKOUT_1,
387 GPIO105_KP_MKOUT_2,
388 GPIO106_KP_MKOUT_3,
389 GPIO107_KP_MKOUT_4,
390 GPIO108_KP_MKOUT_5,
391};
392#endif
393
394
395#ifdef CONFIG_MACH_EZX_A780
396static const unsigned int a780_key_map[] = {
397 KEY(0, 0, KEY_SEND),
398 KEY(0, 1, KEY_BACK),
399 KEY(0, 2, KEY_END),
400 KEY(0, 3, KEY_PAGEUP),
401 KEY(0, 4, KEY_UP),
402
403 KEY(1, 0, KEY_NUMERIC_1),
404 KEY(1, 1, KEY_NUMERIC_2),
405 KEY(1, 2, KEY_NUMERIC_3),
406 KEY(1, 3, KEY_SELECT),
407 KEY(1, 4, KEY_KPENTER),
408
409 KEY(2, 0, KEY_NUMERIC_4),
410 KEY(2, 1, KEY_NUMERIC_5),
411 KEY(2, 2, KEY_NUMERIC_6),
412 KEY(2, 3, KEY_RECORD),
413 KEY(2, 4, KEY_LEFT),
414
415 KEY(3, 0, KEY_NUMERIC_7),
416 KEY(3, 1, KEY_NUMERIC_8),
417 KEY(3, 2, KEY_NUMERIC_9),
418 KEY(3, 3, KEY_HOME),
419 KEY(3, 4, KEY_RIGHT),
420
421 KEY(4, 0, KEY_NUMERIC_STAR),
422 KEY(4, 1, KEY_NUMERIC_0),
423 KEY(4, 2, KEY_NUMERIC_POUND),
424 KEY(4, 3, KEY_PAGEDOWN),
425 KEY(4, 4, KEY_DOWN),
426};
427
428static struct matrix_keymap_data a780_matrix_keymap_data = {
429 .keymap = a780_key_map,
430 .keymap_size = ARRAY_SIZE(a780_key_map),
431};
432
433static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
434 .matrix_key_rows = 5,
435 .matrix_key_cols = 5,
436 .matrix_keymap_data = &a780_matrix_keymap_data,
437
438 .direct_key_map = { KEY_CAMERA },
439 .direct_key_num = 1,
440
441 .debounce_interval = 30,
442};
443#endif
444
445#ifdef CONFIG_MACH_EZX_E680
446static const unsigned int e680_key_map[] = {
447 KEY(0, 0, KEY_UP),
448 KEY(0, 1, KEY_RIGHT),
449 KEY(0, 2, KEY_RESERVED),
450 KEY(0, 3, KEY_SEND),
451
452 KEY(1, 0, KEY_DOWN),
453 KEY(1, 1, KEY_LEFT),
454 KEY(1, 2, KEY_PAGEUP),
455 KEY(1, 3, KEY_PAGEDOWN),
456
457 KEY(2, 0, KEY_RESERVED),
458 KEY(2, 1, KEY_RESERVED),
459 KEY(2, 2, KEY_RESERVED),
460 KEY(2, 3, KEY_KPENTER),
461};
462
463static struct matrix_keymap_data e680_matrix_keymap_data = {
464 .keymap = e680_key_map,
465 .keymap_size = ARRAY_SIZE(e680_key_map),
466};
467
468static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
469 .matrix_key_rows = 3,
470 .matrix_key_cols = 4,
471 .matrix_keymap_data = &e680_matrix_keymap_data,
472
473 .direct_key_map = {
474 KEY_CAMERA,
475 KEY_RESERVED,
476 KEY_RESERVED,
477 KEY_F1,
478 KEY_CANCEL,
479 KEY_F2,
480 },
481 .direct_key_num = 6,
482
483 .debounce_interval = 30,
484};
485#endif
486
487#ifdef CONFIG_MACH_EZX_A1200
488static const unsigned int a1200_key_map[] = {
489 KEY(0, 0, KEY_RESERVED),
490 KEY(0, 1, KEY_RIGHT),
491 KEY(0, 2, KEY_PAGEDOWN),
492 KEY(0, 3, KEY_RESERVED),
493 KEY(0, 4, KEY_RESERVED),
494 KEY(0, 5, KEY_RESERVED),
495
496 KEY(1, 0, KEY_RESERVED),
497 KEY(1, 1, KEY_DOWN),
498 KEY(1, 2, KEY_CAMERA),
499 KEY(1, 3, KEY_RESERVED),
500 KEY(1, 4, KEY_RESERVED),
501 KEY(1, 5, KEY_RESERVED),
502
503 KEY(2, 0, KEY_RESERVED),
504 KEY(2, 1, KEY_KPENTER),
505 KEY(2, 2, KEY_RECORD),
506 KEY(2, 3, KEY_RESERVED),
507 KEY(2, 4, KEY_RESERVED),
508 KEY(2, 5, KEY_SELECT),
509
510 KEY(3, 0, KEY_RESERVED),
511 KEY(3, 1, KEY_UP),
512 KEY(3, 2, KEY_SEND),
513 KEY(3, 3, KEY_RESERVED),
514 KEY(3, 4, KEY_RESERVED),
515 KEY(3, 5, KEY_RESERVED),
516
517 KEY(4, 0, KEY_RESERVED),
518 KEY(4, 1, KEY_LEFT),
519 KEY(4, 2, KEY_PAGEUP),
520 KEY(4, 3, KEY_RESERVED),
521 KEY(4, 4, KEY_RESERVED),
522 KEY(4, 5, KEY_RESERVED),
523};
524
525static struct matrix_keymap_data a1200_matrix_keymap_data = {
526 .keymap = a1200_key_map,
527 .keymap_size = ARRAY_SIZE(a1200_key_map),
528};
529
530static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
531 .matrix_key_rows = 5,
532 .matrix_key_cols = 6,
533 .matrix_keymap_data = &a1200_matrix_keymap_data,
534
535 .debounce_interval = 30,
536};
537#endif
538
539#ifdef CONFIG_MACH_EZX_E6
540static const unsigned int e6_key_map[] = {
541 KEY(0, 0, KEY_RESERVED),
542 KEY(0, 1, KEY_RIGHT),
543 KEY(0, 2, KEY_PAGEDOWN),
544 KEY(0, 3, KEY_RESERVED),
545 KEY(0, 4, KEY_RESERVED),
546 KEY(0, 5, KEY_NEXTSONG),
547
548 KEY(1, 0, KEY_RESERVED),
549 KEY(1, 1, KEY_DOWN),
550 KEY(1, 2, KEY_PROG1),
551 KEY(1, 3, KEY_RESERVED),
552 KEY(1, 4, KEY_RESERVED),
553 KEY(1, 5, KEY_RESERVED),
554
555 KEY(2, 0, KEY_RESERVED),
556 KEY(2, 1, KEY_ENTER),
557 KEY(2, 2, KEY_CAMERA),
558 KEY(2, 3, KEY_RESERVED),
559 KEY(2, 4, KEY_RESERVED),
560 KEY(2, 5, KEY_WWW),
561
562 KEY(3, 0, KEY_RESERVED),
563 KEY(3, 1, KEY_UP),
564 KEY(3, 2, KEY_SEND),
565 KEY(3, 3, KEY_RESERVED),
566 KEY(3, 4, KEY_RESERVED),
567 KEY(3, 5, KEY_PLAYPAUSE),
568
569 KEY(4, 0, KEY_RESERVED),
570 KEY(4, 1, KEY_LEFT),
571 KEY(4, 2, KEY_PAGEUP),
572 KEY(4, 3, KEY_RESERVED),
573 KEY(4, 4, KEY_RESERVED),
574 KEY(4, 5, KEY_PREVIOUSSONG),
575};
576
577static struct matrix_keymap_data e6_keymap_data = {
578 .keymap = e6_key_map,
579 .keymap_size = ARRAY_SIZE(e6_key_map),
580};
581
582static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
583 .matrix_key_rows = 5,
584 .matrix_key_cols = 6,
585 .matrix_keymap_data = &e6_keymap_data,
586
587 .debounce_interval = 30,
588};
589#endif
590
591#ifdef CONFIG_MACH_EZX_A910
592static const unsigned int a910_key_map[] = {
593 KEY(0, 0, KEY_NUMERIC_6),
594 KEY(0, 1, KEY_RIGHT),
595 KEY(0, 2, KEY_PAGEDOWN),
596 KEY(0, 3, KEY_KPENTER),
597 KEY(0, 4, KEY_NUMERIC_5),
598 KEY(0, 5, KEY_CAMERA),
599
600 KEY(1, 0, KEY_NUMERIC_8),
601 KEY(1, 1, KEY_DOWN),
602 KEY(1, 2, KEY_RESERVED),
603 KEY(1, 3, KEY_F1),
604 KEY(1, 4, KEY_NUMERIC_STAR),
605 KEY(1, 5, KEY_RESERVED),
606
607 KEY(2, 0, KEY_NUMERIC_7),
608 KEY(2, 1, KEY_NUMERIC_9),
609 KEY(2, 2, KEY_RECORD),
610 KEY(2, 3, KEY_F2),
611 KEY(2, 4, KEY_BACK),
612 KEY(2, 5, KEY_SELECT),
613
614 KEY(3, 0, KEY_NUMERIC_2),
615 KEY(3, 1, KEY_UP),
616 KEY(3, 2, KEY_SEND),
617 KEY(3, 3, KEY_NUMERIC_0),
618 KEY(3, 4, KEY_NUMERIC_1),
619 KEY(3, 5, KEY_RECORD),
620
621 KEY(4, 0, KEY_NUMERIC_4),
622 KEY(4, 1, KEY_LEFT),
623 KEY(4, 2, KEY_PAGEUP),
624 KEY(4, 3, KEY_NUMERIC_POUND),
625 KEY(4, 4, KEY_NUMERIC_3),
626 KEY(4, 5, KEY_RESERVED),
627};
628
629static struct matrix_keymap_data a910_matrix_keymap_data = {
630 .keymap = a910_key_map,
631 .keymap_size = ARRAY_SIZE(a910_key_map),
632};
633
634static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
635 .matrix_key_rows = 5,
636 .matrix_key_cols = 6,
637 .matrix_keymap_data = &a910_matrix_keymap_data,
638
639 .debounce_interval = 30,
640};
641#endif
642
643#ifdef CONFIG_MACH_EZX_E2
644static const unsigned int e2_key_map[] = {
645 KEY(0, 0, KEY_NUMERIC_6),
646 KEY(0, 1, KEY_RIGHT),
647 KEY(0, 2, KEY_NUMERIC_9),
648 KEY(0, 3, KEY_NEXTSONG),
649 KEY(0, 4, KEY_NUMERIC_5),
650 KEY(0, 5, KEY_F1),
651
652 KEY(1, 0, KEY_NUMERIC_8),
653 KEY(1, 1, KEY_DOWN),
654 KEY(1, 2, KEY_RESERVED),
655 KEY(1, 3, KEY_PAGEUP),
656 KEY(1, 4, KEY_NUMERIC_STAR),
657 KEY(1, 5, KEY_F2),
658
659 KEY(2, 0, KEY_NUMERIC_7),
660 KEY(2, 1, KEY_KPENTER),
661 KEY(2, 2, KEY_RECORD),
662 KEY(2, 3, KEY_PAGEDOWN),
663 KEY(2, 4, KEY_BACK),
664 KEY(2, 5, KEY_NUMERIC_0),
665
666 KEY(3, 0, KEY_NUMERIC_2),
667 KEY(3, 1, KEY_UP),
668 KEY(3, 2, KEY_SEND),
669 KEY(3, 3, KEY_PLAYPAUSE),
670 KEY(3, 4, KEY_NUMERIC_1),
671 KEY(3, 5, KEY_SOUND),
672
673 KEY(4, 0, KEY_NUMERIC_4),
674 KEY(4, 1, KEY_LEFT),
675 KEY(4, 2, KEY_NUMERIC_POUND),
676 KEY(4, 3, KEY_PREVIOUSSONG),
677 KEY(4, 4, KEY_NUMERIC_3),
678 KEY(4, 5, KEY_RESERVED),
679};
680
681static struct matrix_keymap_data e2_matrix_keymap_data = {
682 .keymap = e2_key_map,
683 .keymap_size = ARRAY_SIZE(e2_key_map),
684};
685
686static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
687 .matrix_key_rows = 5,
688 .matrix_key_cols = 6,
689 .matrix_keymap_data = &e2_matrix_keymap_data,
690
691 .debounce_interval = 30,
692};
693#endif
694
695#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
696
697static struct regulator_consumer_supply camera_regulator_supplies[] = {
698 REGULATOR_SUPPLY("vdd", "0-005d"),
699};
700
701static struct regulator_init_data camera_regulator_initdata = {
702 .consumer_supplies = camera_regulator_supplies,
703 .num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
704 .constraints = {
705 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
706 },
707};
708
709static struct fixed_voltage_config camera_regulator_config = {
710 .supply_name = "camera_vdd",
711 .microvolts = 2800000,
712 .init_data = &camera_regulator_initdata,
713};
714
715static struct platform_device camera_supply_regulator_device = {
716 .name = "reg-fixed-voltage",
717 .id = 1,
718 .dev = {
719 .platform_data = &camera_regulator_config,
720 },
721};
722
723static struct gpiod_lookup_table camera_supply_gpiod_table = {
724 .dev_id = "reg-fixed-voltage.1",
725 .table = {
726 GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
727 NULL, GPIO_ACTIVE_LOW),
728 { },
729 },
730};
731#endif
732
733#ifdef CONFIG_MACH_EZX_A780
734
735static struct gpio_keys_button a780_buttons[] = {
736 [0] = {
737 .code = SW_LID,
738 .gpio = GPIO12_A780_FLIP_LID,
739 .active_low = 0,
740 .desc = "A780 flip lid",
741 .type = EV_SW,
742 .wakeup = 1,
743 },
744};
745
746static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
747 .buttons = a780_buttons,
748 .nbuttons = ARRAY_SIZE(a780_buttons),
749};
750
751static struct platform_device a780_gpio_keys = {
752 .name = "gpio-keys",
753 .id = -1,
754 .dev = {
755 .platform_data = &a780_gpio_keys_platform_data,
756 },
757};
758
759
760static int a780_camera_reset(struct device *dev)
761{
762 gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
763 msleep(10);
764 gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
765
766 return 0;
767}
768
769static int a780_camera_init(void)
770{
771 int err;
772
773
774
775
776
777 err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
778 if (err) {
779 pr_err("%s: Failed to request CAM_RST\n", __func__);
780 return err;
781 }
782
783 gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
784 a780_camera_reset(NULL);
785
786 return 0;
787}
788
789struct pxacamera_platform_data a780_pxacamera_platform_data = {
790 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
791 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
792 PXA_CAMERA_PCP,
793 .mclk_10khz = 5000,
794 .sensor_i2c_adapter_id = 0,
795 .sensor_i2c_address = 0x5d,
796};
797
798static struct i2c_board_info a780_i2c_board_info[] = {
799 {
800 I2C_BOARD_INFO("mt9m111", 0x5d),
801 },
802};
803
804static struct platform_device *a780_devices[] __initdata = {
805 &a780_gpio_keys,
806 &camera_supply_regulator_device,
807};
808
809static void __init a780_init(void)
810{
811 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
812 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
813 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
814
815 pxa_set_ffuart_info(NULL);
816 pxa_set_btuart_info(NULL);
817 pxa_set_stuart_info(NULL);
818
819 pxa_set_i2c_info(NULL);
820 i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
821
822 pxa_set_fb_info(NULL, &ezx_fb_info_1);
823
824 pxa_set_keypad_info(&a780_keypad_platform_data);
825
826 if (a780_camera_init() == 0)
827 pxa_set_camera_info(&a780_pxacamera_platform_data);
828
829 gpiod_add_lookup_table(&camera_supply_gpiod_table);
830 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
831 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
832 platform_add_devices(ARRAY_AND_SIZE(a780_devices));
833 regulator_has_full_constraints();
834}
835
836MACHINE_START(EZX_A780, "Motorola EZX A780")
837 .atag_offset = 0x100,
838 .map_io = pxa27x_map_io,
839 .nr_irqs = EZX_NR_IRQS,
840 .init_irq = pxa27x_init_irq,
841 .handle_irq = pxa27x_handle_irq,
842 .init_time = pxa_timer_init,
843 .init_machine = a780_init,
844 .restart = pxa_restart,
845MACHINE_END
846#endif
847
848#ifdef CONFIG_MACH_EZX_E680
849
850static struct gpio_keys_button e680_buttons[] = {
851 [0] = {
852 .code = KEY_SCREENLOCK,
853 .gpio = GPIO12_E680_LOCK_SWITCH,
854 .active_low = 0,
855 .desc = "E680 lock switch",
856 .type = EV_KEY,
857 .wakeup = 1,
858 },
859};
860
861static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
862 .buttons = e680_buttons,
863 .nbuttons = ARRAY_SIZE(e680_buttons),
864};
865
866static struct platform_device e680_gpio_keys = {
867 .name = "gpio-keys",
868 .id = -1,
869 .dev = {
870 .platform_data = &e680_gpio_keys_platform_data,
871 },
872};
873
874static struct i2c_board_info __initdata e680_i2c_board_info[] = {
875 { I2C_BOARD_INFO("tea5767", 0x81) },
876};
877
878static struct platform_device *e680_devices[] __initdata = {
879 &e680_gpio_keys,
880};
881
882static void __init e680_init(void)
883{
884 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
885 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
886 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
887
888 pxa_set_ffuart_info(NULL);
889 pxa_set_btuart_info(NULL);
890 pxa_set_stuart_info(NULL);
891
892 pxa_set_i2c_info(NULL);
893 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
894
895 pxa_set_fb_info(NULL, &ezx_fb_info_1);
896
897 pxa_set_keypad_info(&e680_keypad_platform_data);
898
899 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
900 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
901 platform_add_devices(ARRAY_AND_SIZE(e680_devices));
902}
903
904MACHINE_START(EZX_E680, "Motorola EZX E680")
905 .atag_offset = 0x100,
906 .map_io = pxa27x_map_io,
907 .nr_irqs = EZX_NR_IRQS,
908 .init_irq = pxa27x_init_irq,
909 .handle_irq = pxa27x_handle_irq,
910 .init_time = pxa_timer_init,
911 .init_machine = e680_init,
912 .restart = pxa_restart,
913MACHINE_END
914#endif
915
916#ifdef CONFIG_MACH_EZX_A1200
917
918static struct gpio_keys_button a1200_buttons[] = {
919 [0] = {
920 .code = SW_LID,
921 .gpio = GPIO15_A1200_FLIP_LID,
922 .active_low = 0,
923 .desc = "A1200 flip lid",
924 .type = EV_SW,
925 .wakeup = 1,
926 },
927};
928
929static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
930 .buttons = a1200_buttons,
931 .nbuttons = ARRAY_SIZE(a1200_buttons),
932};
933
934static struct platform_device a1200_gpio_keys = {
935 .name = "gpio-keys",
936 .id = -1,
937 .dev = {
938 .platform_data = &a1200_gpio_keys_platform_data,
939 },
940};
941
942static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
943 { I2C_BOARD_INFO("tea5767", 0x81) },
944};
945
946static struct platform_device *a1200_devices[] __initdata = {
947 &a1200_gpio_keys,
948};
949
950static void __init a1200_init(void)
951{
952 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
953 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
954 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
955
956 pxa_set_ffuart_info(NULL);
957 pxa_set_btuart_info(NULL);
958 pxa_set_stuart_info(NULL);
959
960 pxa_set_i2c_info(NULL);
961 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
962
963 pxa_set_fb_info(NULL, &ezx_fb_info_2);
964
965 pxa_set_keypad_info(&a1200_keypad_platform_data);
966
967 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
968 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
969 platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
970}
971
972MACHINE_START(EZX_A1200, "Motorola EZX A1200")
973 .atag_offset = 0x100,
974 .map_io = pxa27x_map_io,
975 .nr_irqs = EZX_NR_IRQS,
976 .init_irq = pxa27x_init_irq,
977 .handle_irq = pxa27x_handle_irq,
978 .init_time = pxa_timer_init,
979 .init_machine = a1200_init,
980 .restart = pxa_restart,
981MACHINE_END
982#endif
983
984#ifdef CONFIG_MACH_EZX_A910
985
986static struct gpio_keys_button a910_buttons[] = {
987 [0] = {
988 .code = SW_LID,
989 .gpio = GPIO15_A910_FLIP_LID,
990 .active_low = 0,
991 .desc = "A910 flip lid",
992 .type = EV_SW,
993 .wakeup = 1,
994 },
995};
996
997static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
998 .buttons = a910_buttons,
999 .nbuttons = ARRAY_SIZE(a910_buttons),
1000};
1001
1002static struct platform_device a910_gpio_keys = {
1003 .name = "gpio-keys",
1004 .id = -1,
1005 .dev = {
1006 .platform_data = &a910_gpio_keys_platform_data,
1007 },
1008};
1009
1010
1011static int a910_camera_reset(struct device *dev)
1012{
1013 gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
1014 msleep(10);
1015 gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
1016
1017 return 0;
1018}
1019
1020static int a910_camera_init(void)
1021{
1022 int err;
1023
1024
1025
1026
1027
1028 err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
1029 if (err) {
1030 pr_err("%s: Failed to request CAM_RST\n", __func__);
1031 return err;
1032 }
1033
1034 gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
1035 a910_camera_reset(NULL);
1036
1037 return 0;
1038}
1039
1040struct pxacamera_platform_data a910_pxacamera_platform_data = {
1041 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
1042 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
1043 PXA_CAMERA_PCP,
1044 .mclk_10khz = 5000,
1045 .sensor_i2c_adapter_id = 0,
1046 .sensor_i2c_address = 0x5d,
1047};
1048
1049
1050static struct lp3944_platform_data a910_lp3944_leds = {
1051 .leds_size = LP3944_LEDS_MAX,
1052 .leds = {
1053 [0] = {
1054 .name = "a910:red:",
1055 .status = LP3944_LED_STATUS_OFF,
1056 .type = LP3944_LED_TYPE_LED,
1057 },
1058 [1] = {
1059 .name = "a910:green:",
1060 .status = LP3944_LED_STATUS_OFF,
1061 .type = LP3944_LED_TYPE_LED,
1062 },
1063 [2] {
1064 .name = "a910:blue:",
1065 .status = LP3944_LED_STATUS_OFF,
1066 .type = LP3944_LED_TYPE_LED,
1067 },
1068
1069 [3] = {
1070 .name = "a910::cli_display",
1071 .status = LP3944_LED_STATUS_OFF,
1072 .type = LP3944_LED_TYPE_LED_INVERTED
1073 },
1074 [4] = {
1075 .name = "a910::main_display",
1076 .status = LP3944_LED_STATUS_ON,
1077 .type = LP3944_LED_TYPE_LED_INVERTED
1078 },
1079 [5] = { .type = LP3944_LED_TYPE_NONE },
1080 [6] = {
1081 .name = "a910::torch",
1082 .status = LP3944_LED_STATUS_OFF,
1083 .type = LP3944_LED_TYPE_LED,
1084 },
1085 [7] = {
1086 .name = "a910::flash",
1087 .status = LP3944_LED_STATUS_OFF,
1088 .type = LP3944_LED_TYPE_LED_INVERTED,
1089 },
1090 },
1091};
1092
1093static struct i2c_board_info __initdata a910_i2c_board_info[] = {
1094 {
1095 I2C_BOARD_INFO("lp3944", 0x60),
1096 .platform_data = &a910_lp3944_leds,
1097 },
1098 {
1099 I2C_BOARD_INFO("mt9m111", 0x5d),
1100 },
1101};
1102
1103static struct platform_device *a910_devices[] __initdata = {
1104 &a910_gpio_keys,
1105 &camera_supply_regulator_device,
1106};
1107
1108static void __init a910_init(void)
1109{
1110 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1111 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1112 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
1113
1114 pxa_set_ffuart_info(NULL);
1115 pxa_set_btuart_info(NULL);
1116 pxa_set_stuart_info(NULL);
1117
1118 pxa_set_i2c_info(NULL);
1119 i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
1120
1121 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1122
1123 pxa_set_keypad_info(&a910_keypad_platform_data);
1124
1125 if (a910_camera_init() == 0)
1126 pxa_set_camera_info(&a910_pxacamera_platform_data);
1127
1128 gpiod_add_lookup_table(&camera_supply_gpiod_table);
1129 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1130 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1131 platform_add_devices(ARRAY_AND_SIZE(a910_devices));
1132 regulator_has_full_constraints();
1133}
1134
1135MACHINE_START(EZX_A910, "Motorola EZX A910")
1136 .atag_offset = 0x100,
1137 .map_io = pxa27x_map_io,
1138 .nr_irqs = EZX_NR_IRQS,
1139 .init_irq = pxa27x_init_irq,
1140 .handle_irq = pxa27x_handle_irq,
1141 .init_time = pxa_timer_init,
1142 .init_machine = a910_init,
1143 .restart = pxa_restart,
1144MACHINE_END
1145#endif
1146
1147#ifdef CONFIG_MACH_EZX_E6
1148
1149static struct gpio_keys_button e6_buttons[] = {
1150 [0] = {
1151 .code = KEY_SCREENLOCK,
1152 .gpio = GPIO15_E6_LOCK_SWITCH,
1153 .active_low = 0,
1154 .desc = "E6 lock switch",
1155 .type = EV_KEY,
1156 .wakeup = 1,
1157 },
1158};
1159
1160static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
1161 .buttons = e6_buttons,
1162 .nbuttons = ARRAY_SIZE(e6_buttons),
1163};
1164
1165static struct platform_device e6_gpio_keys = {
1166 .name = "gpio-keys",
1167 .id = -1,
1168 .dev = {
1169 .platform_data = &e6_gpio_keys_platform_data,
1170 },
1171};
1172
1173static struct i2c_board_info __initdata e6_i2c_board_info[] = {
1174 { I2C_BOARD_INFO("tea5767", 0x81) },
1175};
1176
1177static struct platform_device *e6_devices[] __initdata = {
1178 &e6_gpio_keys,
1179};
1180
1181static void __init e6_init(void)
1182{
1183 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1184 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1185 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
1186
1187 pxa_set_ffuart_info(NULL);
1188 pxa_set_btuart_info(NULL);
1189 pxa_set_stuart_info(NULL);
1190
1191 pxa_set_i2c_info(NULL);
1192 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
1193
1194 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1195
1196 pxa_set_keypad_info(&e6_keypad_platform_data);
1197
1198 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1199 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1200 platform_add_devices(ARRAY_AND_SIZE(e6_devices));
1201}
1202
1203MACHINE_START(EZX_E6, "Motorola EZX E6")
1204 .atag_offset = 0x100,
1205 .map_io = pxa27x_map_io,
1206 .nr_irqs = EZX_NR_IRQS,
1207 .init_irq = pxa27x_init_irq,
1208 .handle_irq = pxa27x_handle_irq,
1209 .init_time = pxa_timer_init,
1210 .init_machine = e6_init,
1211 .restart = pxa_restart,
1212MACHINE_END
1213#endif
1214
1215#ifdef CONFIG_MACH_EZX_E2
1216static struct i2c_board_info __initdata e2_i2c_board_info[] = {
1217 { I2C_BOARD_INFO("tea5767", 0x81) },
1218};
1219
1220static struct platform_device *e2_devices[] __initdata = {
1221};
1222
1223static void __init e2_init(void)
1224{
1225 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1226 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1227 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
1228
1229 pxa_set_ffuart_info(NULL);
1230 pxa_set_btuart_info(NULL);
1231 pxa_set_stuart_info(NULL);
1232
1233 pxa_set_i2c_info(NULL);
1234 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
1235
1236 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1237
1238 pxa_set_keypad_info(&e2_keypad_platform_data);
1239
1240 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1241 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1242 platform_add_devices(ARRAY_AND_SIZE(e2_devices));
1243}
1244
1245MACHINE_START(EZX_E2, "Motorola EZX E2")
1246 .atag_offset = 0x100,
1247 .map_io = pxa27x_map_io,
1248 .nr_irqs = EZX_NR_IRQS,
1249 .init_irq = pxa27x_init_irq,
1250 .handle_irq = pxa27x_handle_irq,
1251 .init_time = pxa_timer_init,
1252 .init_machine = e2_init,
1253 .restart = pxa_restart,
1254MACHINE_END
1255#endif
1256
