linux/drivers/acpi/processor_idle.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * processor_idle - idle state submodule to the ACPI processor driver
   4 *
   5 *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   6 *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   7 *  Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
   8 *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
   9 *                      - Added processor hotplug support
  10 *  Copyright (C) 2005  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  11 *                      - Added support for C3 on SMP
  12 */
  13#define pr_fmt(fmt) "ACPI: " fmt
  14
  15#include <linux/module.h>
  16#include <linux/acpi.h>
  17#include <linux/dmi.h>
  18#include <linux/sched.h>       /* need_resched() */
  19#include <linux/tick.h>
  20#include <linux/cpuidle.h>
  21#include <linux/cpu.h>
  22#include <acpi/processor.h>
  23
  24/*
  25 * Include the apic definitions for x86 to have the APIC timer related defines
  26 * available also for UP (on SMP it gets magically included via linux/smp.h).
  27 * asm/acpi.h is not an option, as it would require more include magic. Also
  28 * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
  29 */
  30#ifdef CONFIG_X86
  31#include <asm/apic.h>
  32#endif
  33
  34#define ACPI_PROCESSOR_CLASS            "processor"
  35#define _COMPONENT              ACPI_PROCESSOR_COMPONENT
  36ACPI_MODULE_NAME("processor_idle");
  37
  38#define ACPI_IDLE_STATE_START   (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
  39
  40static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
  41module_param(max_cstate, uint, 0000);
  42static unsigned int nocst __read_mostly;
  43module_param(nocst, uint, 0000);
  44static int bm_check_disable __read_mostly;
  45module_param(bm_check_disable, uint, 0000);
  46
  47static unsigned int latency_factor __read_mostly = 2;
  48module_param(latency_factor, uint, 0644);
  49
  50static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
  51
  52struct cpuidle_driver acpi_idle_driver = {
  53        .name =         "acpi_idle",
  54        .owner =        THIS_MODULE,
  55};
  56
  57#ifdef CONFIG_ACPI_PROCESSOR_CSTATE
  58static
  59DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
  60
  61static int disabled_by_idle_boot_param(void)
  62{
  63        return boot_option_idle_override == IDLE_POLL ||
  64                boot_option_idle_override == IDLE_HALT;
  65}
  66
  67/*
  68 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
  69 * For now disable this. Probably a bug somewhere else.
  70 *
  71 * To skip this limit, boot/load with a large max_cstate limit.
  72 */
  73static int set_max_cstate(const struct dmi_system_id *id)
  74{
  75        if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
  76                return 0;
  77
  78        pr_notice("%s detected - limiting to C%ld max_cstate."
  79                  " Override with \"processor.max_cstate=%d\"\n", id->ident,
  80                  (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
  81
  82        max_cstate = (long)id->driver_data;
  83
  84        return 0;
  85}
  86
  87static const struct dmi_system_id processor_power_dmi_table[] = {
  88        { set_max_cstate, "Clevo 5600D", {
  89          DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
  90          DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
  91         (void *)2},
  92        { set_max_cstate, "Pavilion zv5000", {
  93          DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
  94          DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
  95         (void *)1},
  96        { set_max_cstate, "Asus L8400B", {
  97          DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
  98          DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
  99         (void *)1},
 100        {},
 101};
 102
 103
 104/*
 105 * Callers should disable interrupts before the call and enable
 106 * interrupts after return.
 107 */
 108static void __cpuidle acpi_safe_halt(void)
 109{
 110        if (!tif_need_resched()) {
 111                safe_halt();
 112                local_irq_disable();
 113        }
 114}
 115
 116#ifdef ARCH_APICTIMER_STOPS_ON_C3
 117
 118/*
 119 * Some BIOS implementations switch to C3 in the published C2 state.
 120 * This seems to be a common problem on AMD boxen, but other vendors
 121 * are affected too. We pick the most conservative approach: we assume
 122 * that the local APIC stops in both C2 and C3.
 123 */
 124static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 125                                   struct acpi_processor_cx *cx)
 126{
 127        struct acpi_processor_power *pwr = &pr->power;
 128        u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
 129
 130        if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 131                return;
 132
 133        if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
 134                type = ACPI_STATE_C1;
 135
 136        /*
 137         * Check, if one of the previous states already marked the lapic
 138         * unstable
 139         */
 140        if (pwr->timer_broadcast_on_state < state)
 141                return;
 142
 143        if (cx->type >= type)
 144                pr->power.timer_broadcast_on_state = state;
 145}
 146
 147static void __lapic_timer_propagate_broadcast(void *arg)
 148{
 149        struct acpi_processor *pr = (struct acpi_processor *) arg;
 150
 151        if (pr->power.timer_broadcast_on_state < INT_MAX)
 152                tick_broadcast_enable();
 153        else
 154                tick_broadcast_disable();
 155}
 156
 157static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
 158{
 159        smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast,
 160                                 (void *)pr, 1);
 161}
 162
 163/* Power(C) State timer broadcast control */
 164static void lapic_timer_state_broadcast(struct acpi_processor *pr,
 165                                       struct acpi_processor_cx *cx,
 166                                       int broadcast)
 167{
 168        int state = cx - pr->power.states;
 169
 170        if (state >= pr->power.timer_broadcast_on_state) {
 171                if (broadcast)
 172                        tick_broadcast_enter();
 173                else
 174                        tick_broadcast_exit();
 175        }
 176}
 177
 178#else
 179
 180static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 181                                   struct acpi_processor_cx *cstate) { }
 182static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
 183static void lapic_timer_state_broadcast(struct acpi_processor *pr,
 184                                       struct acpi_processor_cx *cx,
 185                                       int broadcast)
 186{
 187}
 188
 189#endif
 190
 191#if defined(CONFIG_X86)
 192static void tsc_check_state(int state)
 193{
 194        switch (boot_cpu_data.x86_vendor) {
 195        case X86_VENDOR_HYGON:
 196        case X86_VENDOR_AMD:
 197        case X86_VENDOR_INTEL:
 198        case X86_VENDOR_CENTAUR:
 199        case X86_VENDOR_ZHAOXIN:
 200                /*
 201                 * AMD Fam10h TSC will tick in all
 202                 * C/P/S0/S1 states when this bit is set.
 203                 */
 204                if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 205                        return;
 206
 207                /*FALL THROUGH*/
 208        default:
 209                /* TSC could halt in idle, so notify users */
 210                if (state > ACPI_STATE_C1)
 211                        mark_tsc_unstable("TSC halts in idle");
 212        }
 213}
 214#else
 215static void tsc_check_state(int state) { return; }
 216#endif
 217
 218static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 219{
 220
 221        if (!pr->pblk)
 222                return -ENODEV;
 223
 224        /* if info is obtained from pblk/fadt, type equals state */
 225        pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
 226        pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
 227
 228#ifndef CONFIG_HOTPLUG_CPU
 229        /*
 230         * Check for P_LVL2_UP flag before entering C2 and above on
 231         * an SMP system.
 232         */
 233        if ((num_online_cpus() > 1) &&
 234            !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 235                return -ENODEV;
 236#endif
 237
 238        /* determine C2 and C3 address from pblk */
 239        pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
 240        pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
 241
 242        /* determine latencies from FADT */
 243        pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
 244        pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
 245
 246        /*
 247         * FADT specified C2 latency must be less than or equal to
 248         * 100 microseconds.
 249         */
 250        if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
 251                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 252                        "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
 253                /* invalidate C2 */
 254                pr->power.states[ACPI_STATE_C2].address = 0;
 255        }
 256
 257        /*
 258         * FADT supplied C3 latency must be less than or equal to
 259         * 1000 microseconds.
 260         */
 261        if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
 262                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 263                        "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
 264                /* invalidate C3 */
 265                pr->power.states[ACPI_STATE_C3].address = 0;
 266        }
 267
 268        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 269                          "lvl2[0x%08x] lvl3[0x%08x]\n",
 270                          pr->power.states[ACPI_STATE_C2].address,
 271                          pr->power.states[ACPI_STATE_C3].address));
 272
 273        snprintf(pr->power.states[ACPI_STATE_C2].desc,
 274                         ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
 275                         pr->power.states[ACPI_STATE_C2].address);
 276        snprintf(pr->power.states[ACPI_STATE_C3].desc,
 277                         ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x",
 278                         pr->power.states[ACPI_STATE_C3].address);
 279
 280        return 0;
 281}
 282
 283static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
 284{
 285        if (!pr->power.states[ACPI_STATE_C1].valid) {
 286                /* set the first C-State to C1 */
 287                /* all processors need to support C1 */
 288                pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
 289                pr->power.states[ACPI_STATE_C1].valid = 1;
 290                pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
 291
 292                snprintf(pr->power.states[ACPI_STATE_C1].desc,
 293                         ACPI_CX_DESC_LEN, "ACPI HLT");
 294        }
 295        /* the C0 state only exists as a filler in our array */
 296        pr->power.states[ACPI_STATE_C0].valid = 1;
 297        return 0;
 298}
 299
 300static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
 301{
 302        int ret;
 303
 304        if (nocst)
 305                return -ENODEV;
 306
 307        ret = acpi_processor_evaluate_cst(pr->handle, pr->id, &pr->power);
 308        if (ret)
 309                return ret;
 310
 311        if (!pr->power.count)
 312                return -EFAULT;
 313
 314        pr->flags.has_cst = 1;
 315        return 0;
 316}
 317
 318static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 319                                           struct acpi_processor_cx *cx)
 320{
 321        static int bm_check_flag = -1;
 322        static int bm_control_flag = -1;
 323
 324
 325        if (!cx->address)
 326                return;
 327
 328        /*
 329         * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
 330         * DMA transfers are used by any ISA device to avoid livelock.
 331         * Note that we could disable Type-F DMA (as recommended by
 332         * the erratum), but this is known to disrupt certain ISA
 333         * devices thus we take the conservative approach.
 334         */
 335        else if (errata.piix4.fdma) {
 336                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 337                                  "C3 not supported on PIIX4 with Type-F DMA\n"));
 338                return;
 339        }
 340
 341        /* All the logic here assumes flags.bm_check is same across all CPUs */
 342        if (bm_check_flag == -1) {
 343                /* Determine whether bm_check is needed based on CPU  */
 344                acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
 345                bm_check_flag = pr->flags.bm_check;
 346                bm_control_flag = pr->flags.bm_control;
 347        } else {
 348                pr->flags.bm_check = bm_check_flag;
 349                pr->flags.bm_control = bm_control_flag;
 350        }
 351
 352        if (pr->flags.bm_check) {
 353                if (!pr->flags.bm_control) {
 354                        if (pr->flags.has_cst != 1) {
 355                                /* bus mastering control is necessary */
 356                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 357                                        "C3 support requires BM control\n"));
 358                                return;
 359                        } else {
 360                                /* Here we enter C3 without bus mastering */
 361                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 362                                        "C3 support without BM control\n"));
 363                        }
 364                }
 365        } else {
 366                /*
 367                 * WBINVD should be set in fadt, for C3 state to be
 368                 * supported on when bm_check is not required.
 369                 */
 370                if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
 371                        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 372                                          "Cache invalidation should work properly"
 373                                          " for C3 to be enabled on SMP systems\n"));
 374                        return;
 375                }
 376        }
 377
 378        /*
 379         * Otherwise we've met all of our C3 requirements.
 380         * Normalize the C3 latency to expidite policy.  Enable
 381         * checking of bus mastering status (bm_check) so we can
 382         * use this in our C3 policy
 383         */
 384        cx->valid = 1;
 385
 386        /*
 387         * On older chipsets, BM_RLD needs to be set
 388         * in order for Bus Master activity to wake the
 389         * system from C3.  Newer chipsets handle DMA
 390         * during C3 automatically and BM_RLD is a NOP.
 391         * In either case, the proper way to
 392         * handle BM_RLD is to set it and leave it set.
 393         */
 394        acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
 395
 396        return;
 397}
 398
 399static int acpi_processor_power_verify(struct acpi_processor *pr)
 400{
 401        unsigned int i;
 402        unsigned int working = 0;
 403
 404        pr->power.timer_broadcast_on_state = INT_MAX;
 405
 406        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 407                struct acpi_processor_cx *cx = &pr->power.states[i];
 408
 409                switch (cx->type) {
 410                case ACPI_STATE_C1:
 411                        cx->valid = 1;
 412                        break;
 413
 414                case ACPI_STATE_C2:
 415                        if (!cx->address)
 416                                break;
 417                        cx->valid = 1;
 418                        break;
 419
 420                case ACPI_STATE_C3:
 421                        acpi_processor_power_verify_c3(pr, cx);
 422                        break;
 423                }
 424                if (!cx->valid)
 425                        continue;
 426
 427                lapic_timer_check_state(i, pr, cx);
 428                tsc_check_state(cx->type);
 429                working++;
 430        }
 431
 432        lapic_timer_propagate_broadcast(pr);
 433
 434        return (working);
 435}
 436
 437static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
 438{
 439        unsigned int i;
 440        int result;
 441
 442
 443        /* NOTE: the idle thread may not be running while calling
 444         * this function */
 445
 446        /* Zero initialize all the C-states info. */
 447        memset(pr->power.states, 0, sizeof(pr->power.states));
 448
 449        result = acpi_processor_get_power_info_cst(pr);
 450        if (result == -ENODEV)
 451                result = acpi_processor_get_power_info_fadt(pr);
 452
 453        if (result)
 454                return result;
 455
 456        acpi_processor_get_power_info_default(pr);
 457
 458        pr->power.count = acpi_processor_power_verify(pr);
 459
 460        /*
 461         * if one state of type C2 or C3 is available, mark this
 462         * CPU as being "idle manageable"
 463         */
 464        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 465                if (pr->power.states[i].valid) {
 466                        pr->power.count = i;
 467                        pr->flags.power = 1;
 468                }
 469        }
 470
 471        return 0;
 472}
 473
 474/**
 475 * acpi_idle_bm_check - checks if bus master activity was detected
 476 */
 477static int acpi_idle_bm_check(void)
 478{
 479        u32 bm_status = 0;
 480
 481        if (bm_check_disable)
 482                return 0;
 483
 484        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
 485        if (bm_status)
 486                acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
 487        /*
 488         * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
 489         * the true state of bus mastering activity; forcing us to
 490         * manually check the BMIDEA bit of each IDE channel.
 491         */
 492        else if (errata.piix4.bmisx) {
 493                if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
 494                    || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
 495                        bm_status = 1;
 496        }
 497        return bm_status;
 498}
 499
 500static void wait_for_freeze(void)
 501{
 502#ifdef  CONFIG_X86
 503        /* No delay is needed if we are in guest */
 504        if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 505                return;
 506#endif
 507        /* Dummy wait op - must do something useless after P_LVL2 read
 508           because chipsets cannot guarantee that STPCLK# signal
 509           gets asserted in time to freeze execution properly. */
 510        inl(acpi_gbl_FADT.xpm_timer_block.address);
 511}
 512
 513/**
 514 * acpi_idle_do_entry - enter idle state using the appropriate method
 515 * @cx: cstate data
 516 *
 517 * Caller disables interrupt before call and enables interrupt after return.
 518 */
 519static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)
 520{
 521        if (cx->entry_method == ACPI_CSTATE_FFH) {
 522                /* Call into architectural FFH based C-state */
 523                acpi_processor_ffh_cstate_enter(cx);
 524        } else if (cx->entry_method == ACPI_CSTATE_HALT) {
 525                acpi_safe_halt();
 526        } else {
 527                /* IO port based C-state */
 528                inb(cx->address);
 529                wait_for_freeze();
 530        }
 531}
 532
 533/**
 534 * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining)
 535 * @dev: the target CPU
 536 * @index: the index of suggested state
 537 */
 538static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
 539{
 540        struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 541
 542        ACPI_FLUSH_CPU_CACHE();
 543
 544        while (1) {
 545
 546                if (cx->entry_method == ACPI_CSTATE_HALT)
 547                        safe_halt();
 548                else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
 549                        inb(cx->address);
 550                        wait_for_freeze();
 551                } else
 552                        return -ENODEV;
 553        }
 554
 555        /* Never reached */
 556        return 0;
 557}
 558
 559static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr)
 560{
 561        return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst &&
 562                !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED);
 563}
 564
 565static int c3_cpu_count;
 566static DEFINE_RAW_SPINLOCK(c3_lock);
 567
 568/**
 569 * acpi_idle_enter_bm - enters C3 with proper BM handling
 570 * @pr: Target processor
 571 * @cx: Target state context
 572 * @timer_bc: Whether or not to change timer mode to broadcast
 573 */
 574static void acpi_idle_enter_bm(struct acpi_processor *pr,
 575                               struct acpi_processor_cx *cx, bool timer_bc)
 576{
 577        acpi_unlazy_tlb(smp_processor_id());
 578
 579        /*
 580         * Must be done before busmaster disable as we might need to
 581         * access HPET !
 582         */
 583        if (timer_bc)
 584                lapic_timer_state_broadcast(pr, cx, 1);
 585
 586        /*
 587         * disable bus master
 588         * bm_check implies we need ARB_DIS
 589         * bm_control implies whether we can do ARB_DIS
 590         *
 591         * That leaves a case where bm_check is set and bm_control is
 592         * not set. In that case we cannot do much, we enter C3
 593         * without doing anything.
 594         */
 595        if (pr->flags.bm_control) {
 596                raw_spin_lock(&c3_lock);
 597                c3_cpu_count++;
 598                /* Disable bus master arbitration when all CPUs are in C3 */
 599                if (c3_cpu_count == num_online_cpus())
 600                        acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
 601                raw_spin_unlock(&c3_lock);
 602        }
 603
 604        acpi_idle_do_entry(cx);
 605
 606        /* Re-enable bus master arbitration */
 607        if (pr->flags.bm_control) {
 608                raw_spin_lock(&c3_lock);
 609                acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
 610                c3_cpu_count--;
 611                raw_spin_unlock(&c3_lock);
 612        }
 613
 614        if (timer_bc)
 615                lapic_timer_state_broadcast(pr, cx, 0);
 616}
 617
 618static int acpi_idle_enter(struct cpuidle_device *dev,
 619                           struct cpuidle_driver *drv, int index)
 620{
 621        struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 622        struct acpi_processor *pr;
 623
 624        pr = __this_cpu_read(processors);
 625        if (unlikely(!pr))
 626                return -EINVAL;
 627
 628        if (cx->type != ACPI_STATE_C1) {
 629                if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) {
 630                        index = ACPI_IDLE_STATE_START;
 631                        cx = per_cpu(acpi_cstate[index], dev->cpu);
 632                } else if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check) {
 633                        if (cx->bm_sts_skip || !acpi_idle_bm_check()) {
 634                                acpi_idle_enter_bm(pr, cx, true);
 635                                return index;
 636                        } else if (drv->safe_state_index >= 0) {
 637                                index = drv->safe_state_index;
 638                                cx = per_cpu(acpi_cstate[index], dev->cpu);
 639                        } else {
 640                                acpi_safe_halt();
 641                                return -EBUSY;
 642                        }
 643                }
 644        }
 645
 646        lapic_timer_state_broadcast(pr, cx, 1);
 647
 648        if (cx->type == ACPI_STATE_C3)
 649                ACPI_FLUSH_CPU_CACHE();
 650
 651        acpi_idle_do_entry(cx);
 652
 653        lapic_timer_state_broadcast(pr, cx, 0);
 654
 655        return index;
 656}
 657
 658static void acpi_idle_enter_s2idle(struct cpuidle_device *dev,
 659                                   struct cpuidle_driver *drv, int index)
 660{
 661        struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 662
 663        if (cx->type == ACPI_STATE_C3) {
 664                struct acpi_processor *pr = __this_cpu_read(processors);
 665
 666                if (unlikely(!pr))
 667                        return;
 668
 669                if (pr->flags.bm_check) {
 670                        acpi_idle_enter_bm(pr, cx, false);
 671                        return;
 672                } else {
 673                        ACPI_FLUSH_CPU_CACHE();
 674                }
 675        }
 676        acpi_idle_do_entry(cx);
 677}
 678
 679static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
 680                                           struct cpuidle_device *dev)
 681{
 682        int i, count = ACPI_IDLE_STATE_START;
 683        struct acpi_processor_cx *cx;
 684
 685        if (max_cstate == 0)
 686                max_cstate = 1;
 687
 688        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 689                cx = &pr->power.states[i];
 690
 691                if (!cx->valid)
 692                        continue;
 693
 694                per_cpu(acpi_cstate[count], dev->cpu) = cx;
 695
 696                count++;
 697                if (count == CPUIDLE_STATE_MAX)
 698                        break;
 699        }
 700
 701        if (!count)
 702                return -EINVAL;
 703
 704        return 0;
 705}
 706
 707static int acpi_processor_setup_cstates(struct acpi_processor *pr)
 708{
 709        int i, count;
 710        struct acpi_processor_cx *cx;
 711        struct cpuidle_state *state;
 712        struct cpuidle_driver *drv = &acpi_idle_driver;
 713
 714        if (max_cstate == 0)
 715                max_cstate = 1;
 716
 717        if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
 718                cpuidle_poll_state_init(drv);
 719                count = 1;
 720        } else {
 721                count = 0;
 722        }
 723
 724        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 725                cx = &pr->power.states[i];
 726
 727                if (!cx->valid)
 728                        continue;
 729
 730                state = &drv->states[count];
 731                snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
 732                strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
 733                state->exit_latency = cx->latency;
 734                state->target_residency = cx->latency * latency_factor;
 735                state->enter = acpi_idle_enter;
 736
 737                state->flags = 0;
 738                if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2) {
 739                        state->enter_dead = acpi_idle_play_dead;
 740                        drv->safe_state_index = count;
 741                }
 742                /*
 743                 * Halt-induced C1 is not good for ->enter_s2idle, because it
 744                 * re-enables interrupts on exit.  Moreover, C1 is generally not
 745                 * particularly interesting from the suspend-to-idle angle, so
 746                 * avoid C1 and the situations in which we may need to fall back
 747                 * to it altogether.
 748                 */
 749                if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr))
 750                        state->enter_s2idle = acpi_idle_enter_s2idle;
 751
 752                count++;
 753                if (count == CPUIDLE_STATE_MAX)
 754                        break;
 755        }
 756
 757        drv->state_count = count;
 758
 759        if (!count)
 760                return -EINVAL;
 761
 762        return 0;
 763}
 764
 765static inline void acpi_processor_cstate_first_run_checks(void)
 766{
 767        static int first_run;
 768
 769        if (first_run)
 770                return;
 771        dmi_check_system(processor_power_dmi_table);
 772        max_cstate = acpi_processor_cstate_check(max_cstate);
 773        if (max_cstate < ACPI_C_STATES_MAX)
 774                pr_notice("ACPI: processor limited to max C-state %d\n",
 775                          max_cstate);
 776        first_run++;
 777
 778        if (nocst)
 779                return;
 780
 781        acpi_processor_claim_cst_control();
 782}
 783#else
 784
 785static inline int disabled_by_idle_boot_param(void) { return 0; }
 786static inline void acpi_processor_cstate_first_run_checks(void) { }
 787static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
 788{
 789        return -ENODEV;
 790}
 791
 792static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
 793                                           struct cpuidle_device *dev)
 794{
 795        return -EINVAL;
 796}
 797
 798static int acpi_processor_setup_cstates(struct acpi_processor *pr)
 799{
 800        return -EINVAL;
 801}
 802
 803#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
 804
 805struct acpi_lpi_states_array {
 806        unsigned int size;
 807        unsigned int composite_states_size;
 808        struct acpi_lpi_state *entries;
 809        struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER];
 810};
 811
 812static int obj_get_integer(union acpi_object *obj, u32 *value)
 813{
 814        if (obj->type != ACPI_TYPE_INTEGER)
 815                return -EINVAL;
 816
 817        *value = obj->integer.value;
 818        return 0;
 819}
 820
 821static int acpi_processor_evaluate_lpi(acpi_handle handle,
 822                                       struct acpi_lpi_states_array *info)
 823{
 824        acpi_status status;
 825        int ret = 0;
 826        int pkg_count, state_idx = 1, loop;
 827        struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 828        union acpi_object *lpi_data;
 829        struct acpi_lpi_state *lpi_state;
 830
 831        status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
 832        if (ACPI_FAILURE(status)) {
 833                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n"));
 834                return -ENODEV;
 835        }
 836
 837        lpi_data = buffer.pointer;
 838
 839        /* There must be at least 4 elements = 3 elements + 1 package */
 840        if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE ||
 841            lpi_data->package.count < 4) {
 842                pr_debug("not enough elements in _LPI\n");
 843                ret = -ENODATA;
 844                goto end;
 845        }
 846
 847        pkg_count = lpi_data->package.elements[2].integer.value;
 848
 849        /* Validate number of power states. */
 850        if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) {
 851                pr_debug("count given by _LPI is not valid\n");
 852                ret = -ENODATA;
 853                goto end;
 854        }
 855
 856        lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL);
 857        if (!lpi_state) {
 858                ret = -ENOMEM;
 859                goto end;
 860        }
 861
 862        info->size = pkg_count;
 863        info->entries = lpi_state;
 864
 865        /* LPI States start at index 3 */
 866        for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) {
 867                union acpi_object *element, *pkg_elem, *obj;
 868
 869                element = &lpi_data->package.elements[loop];
 870                if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7)
 871                        continue;
 872
 873                pkg_elem = element->package.elements;
 874
 875                obj = pkg_elem + 6;
 876                if (obj->type == ACPI_TYPE_BUFFER) {
 877                        struct acpi_power_register *reg;
 878
 879                        reg = (struct acpi_power_register *)obj->buffer.pointer;
 880                        if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
 881                            reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)
 882                                continue;
 883
 884                        lpi_state->address = reg->address;
 885                        lpi_state->entry_method =
 886                                reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ?
 887                                ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO;
 888                } else if (obj->type == ACPI_TYPE_INTEGER) {
 889                        lpi_state->entry_method = ACPI_CSTATE_INTEGER;
 890                        lpi_state->address = obj->integer.value;
 891                } else {
 892                        continue;
 893                }
 894
 895                /* elements[7,8] skipped for now i.e. Residency/Usage counter*/
 896
 897                obj = pkg_elem + 9;
 898                if (obj->type == ACPI_TYPE_STRING)
 899                        strlcpy(lpi_state->desc, obj->string.pointer,
 900                                ACPI_CX_DESC_LEN);
 901
 902                lpi_state->index = state_idx;
 903                if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) {
 904                        pr_debug("No min. residency found, assuming 10 us\n");
 905                        lpi_state->min_residency = 10;
 906                }
 907
 908                if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) {
 909                        pr_debug("No wakeup residency found, assuming 10 us\n");
 910                        lpi_state->wake_latency = 10;
 911                }
 912
 913                if (obj_get_integer(pkg_elem + 2, &lpi_state->flags))
 914                        lpi_state->flags = 0;
 915
 916                if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags))
 917                        lpi_state->arch_flags = 0;
 918
 919                if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq))
 920                        lpi_state->res_cnt_freq = 1;
 921
 922                if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state))
 923                        lpi_state->enable_parent_state = 0;
 924        }
 925
 926        acpi_handle_debug(handle, "Found %d power states\n", state_idx);
 927end:
 928        kfree(buffer.pointer);
 929        return ret;
 930}
 931
 932/*
 933 * flat_state_cnt - the number of composite LPI states after the process of flattening
 934 */
 935static int flat_state_cnt;
 936
 937/**
 938 * combine_lpi_states - combine local and parent LPI states to form a composite LPI state
 939 *
 940 * @local: local LPI state
 941 * @parent: parent LPI state
 942 * @result: composite LPI state
 943 */
 944static bool combine_lpi_states(struct acpi_lpi_state *local,
 945                               struct acpi_lpi_state *parent,
 946                               struct acpi_lpi_state *result)
 947{
 948        if (parent->entry_method == ACPI_CSTATE_INTEGER) {
 949                if (!parent->address) /* 0 means autopromotable */
 950                        return false;
 951                result->address = local->address + parent->address;
 952        } else {
 953                result->address = parent->address;
 954        }
 955
 956        result->min_residency = max(local->min_residency, parent->min_residency);
 957        result->wake_latency = local->wake_latency + parent->wake_latency;
 958        result->enable_parent_state = parent->enable_parent_state;
 959        result->entry_method = local->entry_method;
 960
 961        result->flags = parent->flags;
 962        result->arch_flags = parent->arch_flags;
 963        result->index = parent->index;
 964
 965        strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
 966        strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
 967        strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
 968        return true;
 969}
 970
 971#define ACPI_LPI_STATE_FLAGS_ENABLED                    BIT(0)
 972
 973static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
 974                                  struct acpi_lpi_state *t)
 975{
 976        curr_level->composite_states[curr_level->composite_states_size++] = t;
 977}
 978
 979static int flatten_lpi_states(struct acpi_processor *pr,
 980                              struct acpi_lpi_states_array *curr_level,
 981                              struct acpi_lpi_states_array *prev_level)
 982{
 983        int i, j, state_count = curr_level->size;
 984        struct acpi_lpi_state *p, *t = curr_level->entries;
 985
 986        curr_level->composite_states_size = 0;
 987        for (j = 0; j < state_count; j++, t++) {
 988                struct acpi_lpi_state *flpi;
 989
 990                if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
 991                        continue;
 992
 993                if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) {
 994                        pr_warn("Limiting number of LPI states to max (%d)\n",
 995                                ACPI_PROCESSOR_MAX_POWER);
 996                        pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
 997                        break;
 998                }
 999
1000                flpi = &pr->power.lpi_states[flat_state_cnt];
1001
1002                if (!prev_level) { /* leaf/processor node */
1003                        memcpy(flpi, t, sizeof(*t));
1004                        stash_composite_state(curr_level, flpi);
1005                        flat_state_cnt++;
1006                        continue;
1007                }
1008
1009                for (i = 0; i < prev_level->composite_states_size; i++) {
1010                        p = prev_level->composite_states[i];
1011                        if (t->index <= p->enable_parent_state &&
1012                            combine_lpi_states(p, t, flpi)) {
1013                                stash_composite_state(curr_level, flpi);
1014                                flat_state_cnt++;
1015                                flpi++;
1016                        }
1017                }
1018        }
1019
1020        kfree(curr_level->entries);
1021        return 0;
1022}
1023
1024static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
1025{
1026        int ret, i;
1027        acpi_status status;
1028        acpi_handle handle = pr->handle, pr_ahandle;
1029        struct acpi_device *d = NULL;
1030        struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
1031
1032        if (!osc_pc_lpi_support_confirmed)
1033                return -EOPNOTSUPP;
1034
1035        if (!acpi_has_method(handle, "_LPI"))
1036                return -EINVAL;
1037
1038        flat_state_cnt = 0;
1039        prev = &info[0];
1040        curr = &info[1];
1041        handle = pr->handle;
1042        ret = acpi_processor_evaluate_lpi(handle, prev);
1043        if (ret)
1044                return ret;
1045        flatten_lpi_states(pr, prev, NULL);
1046
1047        status = acpi_get_parent(handle, &pr_ahandle);
1048        while (ACPI_SUCCESS(status)) {
1049                acpi_bus_get_device(pr_ahandle, &d);
1050                handle = pr_ahandle;
1051
1052                if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
1053                        break;
1054
1055                /* can be optional ? */
1056                if (!acpi_has_method(handle, "_LPI"))
1057                        break;
1058
1059                ret = acpi_processor_evaluate_lpi(handle, curr);
1060                if (ret)
1061                        break;
1062
1063                /* flatten all the LPI states in this level of hierarchy */
1064                flatten_lpi_states(pr, curr, prev);
1065
1066                tmp = prev, prev = curr, curr = tmp;
1067
1068                status = acpi_get_parent(handle, &pr_ahandle);
1069        }
1070
1071        pr->power.count = flat_state_cnt;
1072        /* reset the index after flattening */
1073        for (i = 0; i < pr->power.count; i++)
1074                pr->power.lpi_states[i].index = i;
1075
1076        /* Tell driver that _LPI is supported. */
1077        pr->flags.has_lpi = 1;
1078        pr->flags.power = 1;
1079
1080        return 0;
1081}
1082
1083int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
1084{
1085        return -ENODEV;
1086}
1087
1088int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
1089{
1090        return -ENODEV;
1091}
1092
1093/**
1094 * acpi_idle_lpi_enter - enters an ACPI any LPI state
1095 * @dev: the target CPU
1096 * @drv: cpuidle driver containing cpuidle state info
1097 * @index: index of target state
1098 *
1099 * Return: 0 for success or negative value for error
1100 */
1101static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
1102                               struct cpuidle_driver *drv, int index)
1103{
1104        struct acpi_processor *pr;
1105        struct acpi_lpi_state *lpi;
1106
1107        pr = __this_cpu_read(processors);
1108
1109        if (unlikely(!pr))
1110                return -EINVAL;
1111
1112        lpi = &pr->power.lpi_states[index];
1113        if (lpi->entry_method == ACPI_CSTATE_FFH)
1114                return acpi_processor_ffh_lpi_enter(lpi);
1115
1116        return -EINVAL;
1117}
1118
1119static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
1120{
1121        int i;
1122        struct acpi_lpi_state *lpi;
1123        struct cpuidle_state *state;
1124        struct cpuidle_driver *drv = &acpi_idle_driver;
1125
1126        if (!pr->flags.has_lpi)
1127                return -EOPNOTSUPP;
1128
1129        for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) {
1130                lpi = &pr->power.lpi_states[i];
1131
1132                state = &drv->states[i];
1133                snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
1134                strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
1135                state->exit_latency = lpi->wake_latency;
1136                state->target_residency = lpi->min_residency;
1137                if (lpi->arch_flags)
1138                        state->flags |= CPUIDLE_FLAG_TIMER_STOP;
1139                state->enter = acpi_idle_lpi_enter;
1140                drv->safe_state_index = i;
1141        }
1142
1143        drv->state_count = i;
1144
1145        return 0;
1146}
1147
1148/**
1149 * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
1150 * global state data i.e. idle routines
1151 *
1152 * @pr: the ACPI processor
1153 */
1154static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
1155{
1156        int i;
1157        struct cpuidle_driver *drv = &acpi_idle_driver;
1158
1159        if (!pr->flags.power_setup_done || !pr->flags.power)
1160                return -EINVAL;
1161
1162        drv->safe_state_index = -1;
1163        for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
1164                drv->states[i].name[0] = '\0';
1165                drv->states[i].desc[0] = '\0';
1166        }
1167
1168        if (pr->flags.has_lpi)
1169                return acpi_processor_setup_lpi_states(pr);
1170
1171        return acpi_processor_setup_cstates(pr);
1172}
1173
1174/**
1175 * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
1176 * device i.e. per-cpu data
1177 *
1178 * @pr: the ACPI processor
1179 * @dev : the cpuidle device
1180 */
1181static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
1182                                            struct cpuidle_device *dev)
1183{
1184        if (!pr->flags.power_setup_done || !pr->flags.power || !dev)
1185                return -EINVAL;
1186
1187        dev->cpu = pr->id;
1188        if (pr->flags.has_lpi)
1189                return acpi_processor_ffh_lpi_probe(pr->id);
1190
1191        return acpi_processor_setup_cpuidle_cx(pr, dev);
1192}
1193
1194static int acpi_processor_get_power_info(struct acpi_processor *pr)
1195{
1196        int ret;
1197
1198        ret = acpi_processor_get_lpi_info(pr);
1199        if (ret)
1200                ret = acpi_processor_get_cstate_info(pr);
1201
1202        return ret;
1203}
1204
1205int acpi_processor_hotplug(struct acpi_processor *pr)
1206{
1207        int ret = 0;
1208        struct cpuidle_device *dev;
1209
1210        if (disabled_by_idle_boot_param())
1211                return 0;
1212
1213        if (!pr->flags.power_setup_done)
1214                return -ENODEV;
1215
1216        dev = per_cpu(acpi_cpuidle_device, pr->id);
1217        cpuidle_pause_and_lock();
1218        cpuidle_disable_device(dev);
1219        ret = acpi_processor_get_power_info(pr);
1220        if (!ret && pr->flags.power) {
1221                acpi_processor_setup_cpuidle_dev(pr, dev);
1222                ret = cpuidle_enable_device(dev);
1223        }
1224        cpuidle_resume_and_unlock();
1225
1226        return ret;
1227}
1228
1229int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
1230{
1231        int cpu;
1232        struct acpi_processor *_pr;
1233        struct cpuidle_device *dev;
1234
1235        if (disabled_by_idle_boot_param())
1236                return 0;
1237
1238        if (!pr->flags.power_setup_done)
1239                return -ENODEV;
1240
1241        /*
1242         * FIXME:  Design the ACPI notification to make it once per
1243         * system instead of once per-cpu.  This condition is a hack
1244         * to make the code that updates C-States be called once.
1245         */
1246
1247        if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
1248
1249                /* Protect against cpu-hotplug */
1250                get_online_cpus();
1251                cpuidle_pause_and_lock();
1252
1253                /* Disable all cpuidle devices */
1254                for_each_online_cpu(cpu) {
1255                        _pr = per_cpu(processors, cpu);
1256                        if (!_pr || !_pr->flags.power_setup_done)
1257                                continue;
1258                        dev = per_cpu(acpi_cpuidle_device, cpu);
1259                        cpuidle_disable_device(dev);
1260                }
1261
1262                /* Populate Updated C-state information */
1263                acpi_processor_get_power_info(pr);
1264                acpi_processor_setup_cpuidle_states(pr);
1265
1266                /* Enable all cpuidle devices */
1267                for_each_online_cpu(cpu) {
1268                        _pr = per_cpu(processors, cpu);
1269                        if (!_pr || !_pr->flags.power_setup_done)
1270                                continue;
1271                        acpi_processor_get_power_info(_pr);
1272                        if (_pr->flags.power) {
1273                                dev = per_cpu(acpi_cpuidle_device, cpu);
1274                                acpi_processor_setup_cpuidle_dev(_pr, dev);
1275                                cpuidle_enable_device(dev);
1276                        }
1277                }
1278                cpuidle_resume_and_unlock();
1279                put_online_cpus();
1280        }
1281
1282        return 0;
1283}
1284
1285static int acpi_processor_registered;
1286
1287int acpi_processor_power_init(struct acpi_processor *pr)
1288{
1289        int retval;
1290        struct cpuidle_device *dev;
1291
1292        if (disabled_by_idle_boot_param())
1293                return 0;
1294
1295        acpi_processor_cstate_first_run_checks();
1296
1297        if (!acpi_processor_get_power_info(pr))
1298                pr->flags.power_setup_done = 1;
1299
1300        /*
1301         * Install the idle handler if processor power management is supported.
1302         * Note that we use previously set idle handler will be used on
1303         * platforms that only support C1.
1304         */
1305        if (pr->flags.power) {
1306                /* Register acpi_idle_driver if not already registered */
1307                if (!acpi_processor_registered) {
1308                        acpi_processor_setup_cpuidle_states(pr);
1309                        retval = cpuidle_register_driver(&acpi_idle_driver);
1310                        if (retval)
1311                                return retval;
1312                        pr_debug("%s registered with cpuidle\n",
1313                                 acpi_idle_driver.name);
1314                }
1315
1316                dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1317                if (!dev)
1318                        return -ENOMEM;
1319                per_cpu(acpi_cpuidle_device, pr->id) = dev;
1320
1321                acpi_processor_setup_cpuidle_dev(pr, dev);
1322
1323                /* Register per-cpu cpuidle_device. Cpuidle driver
1324                 * must already be registered before registering device
1325                 */
1326                retval = cpuidle_register_device(dev);
1327                if (retval) {
1328                        if (acpi_processor_registered == 0)
1329                                cpuidle_unregister_driver(&acpi_idle_driver);
1330                        return retval;
1331                }
1332                acpi_processor_registered++;
1333        }
1334        return 0;
1335}
1336
1337int acpi_processor_power_exit(struct acpi_processor *pr)
1338{
1339        struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
1340
1341        if (disabled_by_idle_boot_param())
1342                return 0;
1343
1344        if (pr->flags.power) {
1345                cpuidle_unregister_device(dev);
1346                acpi_processor_registered--;
1347                if (acpi_processor_registered == 0)
1348                        cpuidle_unregister_driver(&acpi_idle_driver);
1349        }
1350
1351        pr->flags.power_setup_done = 0;
1352        return 0;
1353}
1354