linux/drivers/regulator/max77686-regulator.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2//
   3// max77686.c - Regulator driver for the Maxim 77686
   4//
   5// Copyright (C) 2012 Samsung Electronics
   6// Chiwoong Byun <woong.byun@samsung.com>
   7// Jonghwa Lee <jonghwa3.lee@samsung.com>
   8//
   9// This driver is based on max8997.c
  10
  11#include <linux/kernel.h>
  12#include <linux/bug.h>
  13#include <linux/err.h>
  14#include <linux/gpio/consumer.h>
  15#include <linux/slab.h>
  16#include <linux/platform_device.h>
  17#include <linux/regulator/driver.h>
  18#include <linux/regulator/machine.h>
  19#include <linux/regulator/of_regulator.h>
  20#include <linux/mfd/max77686.h>
  21#include <linux/mfd/max77686-private.h>
  22
  23#define MAX77686_LDO_MINUV      800000
  24#define MAX77686_LDO_UVSTEP     50000
  25#define MAX77686_LDO_LOW_MINUV  800000
  26#define MAX77686_LDO_LOW_UVSTEP 25000
  27#define MAX77686_BUCK_MINUV     750000
  28#define MAX77686_BUCK_UVSTEP    50000
  29#define MAX77686_BUCK_ENABLE_TIME       40              /* us */
  30#define MAX77686_DVS_ENABLE_TIME        22              /* us */
  31#define MAX77686_RAMP_DELAY     100000                  /* uV/us */
  32#define MAX77686_DVS_RAMP_DELAY 27500                   /* uV/us */
  33#define MAX77686_DVS_MINUV      600000
  34#define MAX77686_DVS_UVSTEP     12500
  35
  36/*
  37 * Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
  38 * It is the same as 'off' for other regulators.
  39 */
  40#define MAX77686_GPIO_CONTROL           0x0
  41/*
  42 * Values used for configuring LDOs and bucks.
  43 * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
  44 */
  45#define MAX77686_LDO_LOWPOWER           0x1
  46/*
  47 * On/off controlled by PWRREQ:
  48 *  - LDO2, 6-8, 10-12, 14-16
  49 *  - buck[1234]
  50 */
  51#define MAX77686_OFF_PWRREQ             0x1
  52/* Low power mode controlled by PWRREQ: All LDOs */
  53#define MAX77686_LDO_LOWPOWER_PWRREQ    0x2
  54/* Forcing low power mode: buck[234] */
  55#define MAX77686_BUCK_LOWPOWER          0x2
  56#define MAX77686_NORMAL                 0x3
  57
  58#define MAX77686_OPMODE_SHIFT   6
  59#define MAX77686_OPMODE_BUCK234_SHIFT   4
  60#define MAX77686_OPMODE_MASK    0x3
  61
  62#define MAX77686_VSEL_MASK      0x3F
  63#define MAX77686_DVS_VSEL_MASK  0xFF
  64
  65#define MAX77686_RAMP_RATE_MASK 0xC0
  66
  67#define MAX77686_REGULATORS     MAX77686_REG_MAX
  68#define MAX77686_LDOS           26
  69
  70enum max77686_ramp_rate {
  71        RAMP_RATE_13P75MV,
  72        RAMP_RATE_27P5MV,
  73        RAMP_RATE_55MV,
  74        RAMP_RATE_NO_CTRL,      /* 100mV/us */
  75};
  76
  77struct max77686_data {
  78        struct device *dev;
  79        DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
  80
  81        /* Array indexed by regulator id */
  82        unsigned int opmode[MAX77686_REGULATORS];
  83};
  84
  85static unsigned int max77686_get_opmode_shift(int id)
  86{
  87        switch (id) {
  88        case MAX77686_BUCK1:
  89        case MAX77686_BUCK5 ... MAX77686_BUCK9:
  90                return 0;
  91        case MAX77686_BUCK2 ... MAX77686_BUCK4:
  92                return MAX77686_OPMODE_BUCK234_SHIFT;
  93        default:
  94                /* all LDOs */
  95                return MAX77686_OPMODE_SHIFT;
  96        }
  97}
  98
  99/*
 100 * When regulator is configured for GPIO control then it
 101 * replaces "normal" mode. Any change from low power mode to normal
 102 * should actually change to GPIO control.
 103 * Map normal mode to proper value for such regulators.
 104 */
 105static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
 106                                             int id)
 107{
 108        switch (id) {
 109        case MAX77686_BUCK8:
 110        case MAX77686_BUCK9:
 111        case MAX77686_LDO20 ... MAX77686_LDO22:
 112                if (test_bit(id, max77686->gpio_enabled))
 113                        return MAX77686_GPIO_CONTROL;
 114        }
 115
 116        return MAX77686_NORMAL;
 117}
 118
 119/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
 120static int max77686_set_suspend_disable(struct regulator_dev *rdev)
 121{
 122        unsigned int val, shift;
 123        struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 124        int ret, id = rdev_get_id(rdev);
 125
 126        shift = max77686_get_opmode_shift(id);
 127        val = MAX77686_OFF_PWRREQ;
 128
 129        ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 130                                 rdev->desc->enable_mask, val << shift);
 131        if (ret)
 132                return ret;
 133
 134        max77686->opmode[id] = val;
 135        return 0;
 136}
 137
 138/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
 139static int max77686_set_suspend_mode(struct regulator_dev *rdev,
 140                                     unsigned int mode)
 141{
 142        struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 143        unsigned int val;
 144        int ret, id = rdev_get_id(rdev);
 145
 146        /* BUCK[5-9] doesn't support this feature */
 147        if (id >= MAX77686_BUCK5)
 148                return 0;
 149
 150        switch (mode) {
 151        case REGULATOR_MODE_IDLE:                       /* ON in LP Mode */
 152                val = MAX77686_LDO_LOWPOWER_PWRREQ;
 153                break;
 154        case REGULATOR_MODE_NORMAL:                     /* ON in Normal Mode */
 155                val = max77686_map_normal_mode(max77686, id);
 156                break;
 157        default:
 158                pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
 159                        rdev->desc->name, mode);
 160                return -EINVAL;
 161        }
 162
 163        ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 164                                  rdev->desc->enable_mask,
 165                                  val << MAX77686_OPMODE_SHIFT);
 166        if (ret)
 167                return ret;
 168
 169        max77686->opmode[id] = val;
 170        return 0;
 171}
 172
 173/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
 174static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
 175                                     unsigned int mode)
 176{
 177        unsigned int val;
 178        struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 179        int ret, id = rdev_get_id(rdev);
 180
 181        switch (mode) {
 182        case REGULATOR_MODE_STANDBY:                    /* switch off */
 183                val = MAX77686_OFF_PWRREQ;
 184                break;
 185        case REGULATOR_MODE_IDLE:                       /* ON in LP Mode */
 186                val = MAX77686_LDO_LOWPOWER_PWRREQ;
 187                break;
 188        case REGULATOR_MODE_NORMAL:                     /* ON in Normal Mode */
 189                val = max77686_map_normal_mode(max77686, id);
 190                break;
 191        default:
 192                pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
 193                        rdev->desc->name, mode);
 194                return -EINVAL;
 195        }
 196
 197        ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 198                                 rdev->desc->enable_mask,
 199                                 val << MAX77686_OPMODE_SHIFT);
 200        if (ret)
 201                return ret;
 202
 203        max77686->opmode[id] = val;
 204        return 0;
 205}
 206
 207static int max77686_enable(struct regulator_dev *rdev)
 208{
 209        struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 210        unsigned int shift;
 211        int id = rdev_get_id(rdev);
 212
 213        shift = max77686_get_opmode_shift(id);
 214
 215        if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
 216                max77686->opmode[id] = max77686_map_normal_mode(max77686, id);
 217
 218        return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 219                                  rdev->desc->enable_mask,
 220                                  max77686->opmode[id] << shift);
 221}
 222
 223static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 224{
 225        unsigned int ramp_value = RAMP_RATE_NO_CTRL;
 226
 227        switch (ramp_delay) {
 228        case 1 ... 13750:
 229                ramp_value = RAMP_RATE_13P75MV;
 230                break;
 231        case 13751 ... 27500:
 232                ramp_value = RAMP_RATE_27P5MV;
 233                break;
 234        case 27501 ... 55000:
 235                ramp_value = RAMP_RATE_55MV;
 236                break;
 237        case 55001 ... 100000:
 238                break;
 239        default:
 240                pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
 241                        rdev->desc->name, ramp_delay);
 242        }
 243
 244        return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 245                                  MAX77686_RAMP_RATE_MASK, ramp_value << 6);
 246}
 247
 248static int max77686_of_parse_cb(struct device_node *np,
 249                const struct regulator_desc *desc,
 250                struct regulator_config *config)
 251{
 252        struct max77686_data *max77686 = config->driver_data;
 253        int ret;
 254
 255        switch (desc->id) {
 256        case MAX77686_BUCK8:
 257        case MAX77686_BUCK9:
 258        case MAX77686_LDO20 ... MAX77686_LDO22:
 259                config->ena_gpiod = fwnode_gpiod_get_index(
 260                                of_fwnode_handle(np),
 261                                "maxim,ena",
 262                                0,
 263                                GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 264                                "max77686-regulator");
 265                if (IS_ERR(config->ena_gpiod))
 266                        config->ena_gpiod = NULL;
 267                break;
 268        default:
 269                return 0;
 270        }
 271
 272        if (config->ena_gpiod) {
 273                set_bit(desc->id, max77686->gpio_enabled);
 274
 275                ret = regmap_update_bits(config->regmap, desc->enable_reg,
 276                                         desc->enable_mask,
 277                                         MAX77686_GPIO_CONTROL);
 278                if (ret) {
 279                        gpiod_put(config->ena_gpiod);
 280                        config->ena_gpiod = NULL;
 281                }
 282        }
 283
 284        return 0;
 285}
 286
 287static const struct regulator_ops max77686_ops = {
 288        .list_voltage           = regulator_list_voltage_linear,
 289        .map_voltage            = regulator_map_voltage_linear,
 290        .is_enabled             = regulator_is_enabled_regmap,
 291        .enable                 = max77686_enable,
 292        .disable                = regulator_disable_regmap,
 293        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 294        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 295        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 296        .set_suspend_mode       = max77686_set_suspend_mode,
 297};
 298
 299static const struct regulator_ops max77686_ldo_ops = {
 300        .list_voltage           = regulator_list_voltage_linear,
 301        .map_voltage            = regulator_map_voltage_linear,
 302        .is_enabled             = regulator_is_enabled_regmap,
 303        .enable                 = max77686_enable,
 304        .disable                = regulator_disable_regmap,
 305        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 306        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 307        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 308        .set_suspend_mode       = max77686_ldo_set_suspend_mode,
 309        .set_suspend_disable    = max77686_set_suspend_disable,
 310};
 311
 312static const struct regulator_ops max77686_buck1_ops = {
 313        .list_voltage           = regulator_list_voltage_linear,
 314        .map_voltage            = regulator_map_voltage_linear,
 315        .is_enabled             = regulator_is_enabled_regmap,
 316        .enable                 = max77686_enable,
 317        .disable                = regulator_disable_regmap,
 318        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 319        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 320        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 321        .set_suspend_disable    = max77686_set_suspend_disable,
 322};
 323
 324static const struct regulator_ops max77686_buck_dvs_ops = {
 325        .list_voltage           = regulator_list_voltage_linear,
 326        .map_voltage            = regulator_map_voltage_linear,
 327        .is_enabled             = regulator_is_enabled_regmap,
 328        .enable                 = max77686_enable,
 329        .disable                = regulator_disable_regmap,
 330        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 331        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 332        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 333        .set_ramp_delay         = max77686_set_ramp_delay,
 334        .set_suspend_disable    = max77686_set_suspend_disable,
 335};
 336
 337#define regulator_desc_ldo(num)         {                               \
 338        .name           = "LDO"#num,                                    \
 339        .of_match       = of_match_ptr("LDO"#num),                      \
 340        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 341        .of_parse_cb    = max77686_of_parse_cb,                         \
 342        .id             = MAX77686_LDO##num,                            \
 343        .ops            = &max77686_ops,                                \
 344        .type           = REGULATOR_VOLTAGE,                            \
 345        .owner          = THIS_MODULE,                                  \
 346        .min_uV         = MAX77686_LDO_MINUV,                           \
 347        .uV_step        = MAX77686_LDO_UVSTEP,                          \
 348        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 349        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 350        .vsel_reg       = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 351        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 352        .enable_reg     = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 353        .enable_mask    = MAX77686_OPMODE_MASK                          \
 354                        << MAX77686_OPMODE_SHIFT,                       \
 355}
 356#define regulator_desc_lpm_ldo(num)     {                               \
 357        .name           = "LDO"#num,                                    \
 358        .of_match       = of_match_ptr("LDO"#num),                      \
 359        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 360        .id             = MAX77686_LDO##num,                            \
 361        .ops            = &max77686_ldo_ops,                            \
 362        .type           = REGULATOR_VOLTAGE,                            \
 363        .owner          = THIS_MODULE,                                  \
 364        .min_uV         = MAX77686_LDO_MINUV,                           \
 365        .uV_step        = MAX77686_LDO_UVSTEP,                          \
 366        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 367        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 368        .vsel_reg       = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 369        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 370        .enable_reg     = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 371        .enable_mask    = MAX77686_OPMODE_MASK                          \
 372                        << MAX77686_OPMODE_SHIFT,                       \
 373}
 374#define regulator_desc_ldo_low(num)             {                       \
 375        .name           = "LDO"#num,                                    \
 376        .of_match       = of_match_ptr("LDO"#num),                      \
 377        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 378        .id             = MAX77686_LDO##num,                            \
 379        .ops            = &max77686_ldo_ops,                            \
 380        .type           = REGULATOR_VOLTAGE,                            \
 381        .owner          = THIS_MODULE,                                  \
 382        .min_uV         = MAX77686_LDO_LOW_MINUV,                       \
 383        .uV_step        = MAX77686_LDO_LOW_UVSTEP,                      \
 384        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 385        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 386        .vsel_reg       = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 387        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 388        .enable_reg     = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 389        .enable_mask    = MAX77686_OPMODE_MASK                          \
 390                        << MAX77686_OPMODE_SHIFT,                       \
 391}
 392#define regulator_desc_ldo1_low(num)            {                       \
 393        .name           = "LDO"#num,                                    \
 394        .of_match       = of_match_ptr("LDO"#num),                      \
 395        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 396        .id             = MAX77686_LDO##num,                            \
 397        .ops            = &max77686_ops,                                \
 398        .type           = REGULATOR_VOLTAGE,                            \
 399        .owner          = THIS_MODULE,                                  \
 400        .min_uV         = MAX77686_LDO_LOW_MINUV,                       \
 401        .uV_step        = MAX77686_LDO_LOW_UVSTEP,                      \
 402        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 403        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 404        .vsel_reg       = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 405        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 406        .enable_reg     = MAX77686_REG_LDO1CTRL1 + num - 1,             \
 407        .enable_mask    = MAX77686_OPMODE_MASK                          \
 408                        << MAX77686_OPMODE_SHIFT,                       \
 409}
 410#define regulator_desc_buck(num)                {                       \
 411        .name           = "BUCK"#num,                                   \
 412        .of_match       = of_match_ptr("BUCK"#num),                     \
 413        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 414        .of_parse_cb    = max77686_of_parse_cb,                         \
 415        .id             = MAX77686_BUCK##num,                           \
 416        .ops            = &max77686_ops,                                \
 417        .type           = REGULATOR_VOLTAGE,                            \
 418        .owner          = THIS_MODULE,                                  \
 419        .min_uV         = MAX77686_BUCK_MINUV,                          \
 420        .uV_step        = MAX77686_BUCK_UVSTEP,                         \
 421        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 422        .enable_time    = MAX77686_BUCK_ENABLE_TIME,                    \
 423        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 424        .vsel_reg       = MAX77686_REG_BUCK5OUT + (num - 5) * 2,        \
 425        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 426        .enable_reg     = MAX77686_REG_BUCK5CTRL + (num - 5) * 2,       \
 427        .enable_mask    = MAX77686_OPMODE_MASK,                         \
 428}
 429#define regulator_desc_buck1(num)               {                       \
 430        .name           = "BUCK"#num,                                   \
 431        .of_match       = of_match_ptr("BUCK"#num),                     \
 432        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 433        .id             = MAX77686_BUCK##num,                           \
 434        .ops            = &max77686_buck1_ops,                          \
 435        .type           = REGULATOR_VOLTAGE,                            \
 436        .owner          = THIS_MODULE,                                  \
 437        .min_uV         = MAX77686_BUCK_MINUV,                          \
 438        .uV_step        = MAX77686_BUCK_UVSTEP,                         \
 439        .ramp_delay     = MAX77686_RAMP_DELAY,                          \
 440        .enable_time    = MAX77686_BUCK_ENABLE_TIME,                    \
 441        .n_voltages     = MAX77686_VSEL_MASK + 1,                       \
 442        .vsel_reg       = MAX77686_REG_BUCK1OUT,                        \
 443        .vsel_mask      = MAX77686_VSEL_MASK,                           \
 444        .enable_reg     = MAX77686_REG_BUCK1CTRL,                       \
 445        .enable_mask    = MAX77686_OPMODE_MASK,                         \
 446}
 447#define regulator_desc_buck_dvs(num)            {                       \
 448        .name           = "BUCK"#num,                                   \
 449        .of_match       = of_match_ptr("BUCK"#num),                     \
 450        .regulators_node        = of_match_ptr("voltage-regulators"),   \
 451        .id             = MAX77686_BUCK##num,                           \
 452        .ops            = &max77686_buck_dvs_ops,                       \
 453        .type           = REGULATOR_VOLTAGE,                            \
 454        .owner          = THIS_MODULE,                                  \
 455        .min_uV         = MAX77686_DVS_MINUV,                           \
 456        .uV_step        = MAX77686_DVS_UVSTEP,                          \
 457        .ramp_delay     = MAX77686_DVS_RAMP_DELAY,                      \
 458        .enable_time    = MAX77686_DVS_ENABLE_TIME,                     \
 459        .n_voltages     = MAX77686_DVS_VSEL_MASK + 1,                   \
 460        .vsel_reg       = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10,      \
 461        .vsel_mask      = MAX77686_DVS_VSEL_MASK,                       \
 462        .enable_reg     = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10,     \
 463        .enable_mask    = MAX77686_OPMODE_MASK                          \
 464                        << MAX77686_OPMODE_BUCK234_SHIFT,               \
 465}
 466
 467static const struct regulator_desc regulators[] = {
 468        regulator_desc_ldo1_low(1),
 469        regulator_desc_ldo_low(2),
 470        regulator_desc_ldo(3),
 471        regulator_desc_ldo(4),
 472        regulator_desc_ldo(5),
 473        regulator_desc_ldo_low(6),
 474        regulator_desc_ldo_low(7),
 475        regulator_desc_ldo_low(8),
 476        regulator_desc_ldo(9),
 477        regulator_desc_lpm_ldo(10),
 478        regulator_desc_lpm_ldo(11),
 479        regulator_desc_lpm_ldo(12),
 480        regulator_desc_ldo(13),
 481        regulator_desc_lpm_ldo(14),
 482        regulator_desc_ldo_low(15),
 483        regulator_desc_lpm_ldo(16),
 484        regulator_desc_ldo(17),
 485        regulator_desc_ldo(18),
 486        regulator_desc_ldo(19),
 487        regulator_desc_ldo(20),
 488        regulator_desc_ldo(21),
 489        regulator_desc_ldo(22),
 490        regulator_desc_ldo(23),
 491        regulator_desc_ldo(24),
 492        regulator_desc_ldo(25),
 493        regulator_desc_ldo(26),
 494        regulator_desc_buck1(1),
 495        regulator_desc_buck_dvs(2),
 496        regulator_desc_buck_dvs(3),
 497        regulator_desc_buck_dvs(4),
 498        regulator_desc_buck(5),
 499        regulator_desc_buck(6),
 500        regulator_desc_buck(7),
 501        regulator_desc_buck(8),
 502        regulator_desc_buck(9),
 503};
 504
 505static int max77686_pmic_probe(struct platform_device *pdev)
 506{
 507        struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 508        struct max77686_data *max77686;
 509        int i;
 510        struct regulator_config config = { };
 511
 512        dev_dbg(&pdev->dev, "%s\n", __func__);
 513
 514        max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
 515                                GFP_KERNEL);
 516        if (!max77686)
 517                return -ENOMEM;
 518
 519        max77686->dev = &pdev->dev;
 520        config.dev = iodev->dev;
 521        config.regmap = iodev->regmap;
 522        config.driver_data = max77686;
 523        platform_set_drvdata(pdev, max77686);
 524
 525        for (i = 0; i < MAX77686_REGULATORS; i++) {
 526                struct regulator_dev *rdev;
 527                int id = regulators[i].id;
 528
 529                max77686->opmode[id] = MAX77686_NORMAL;
 530                rdev = devm_regulator_register(&pdev->dev,
 531                                                &regulators[i], &config);
 532                if (IS_ERR(rdev)) {
 533                        int ret = PTR_ERR(rdev);
 534                        dev_err(&pdev->dev,
 535                                "regulator init failed for %d: %d\n", i, ret);
 536                        return ret;
 537                }
 538        }
 539
 540        return 0;
 541}
 542
 543static const struct platform_device_id max77686_pmic_id[] = {
 544        {"max77686-pmic", 0},
 545        { },
 546};
 547MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
 548
 549static struct platform_driver max77686_pmic_driver = {
 550        .driver = {
 551                .name = "max77686-pmic",
 552        },
 553        .probe = max77686_pmic_probe,
 554        .id_table = max77686_pmic_id,
 555};
 556
 557module_platform_driver(max77686_pmic_driver);
 558
 559MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
 560MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
 561MODULE_LICENSE("GPL");
 562