linux/arch/arm/common/sa1111.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * linux/arch/arm/common/sa1111.c
   4 *
   5 * SA1111 support
   6 *
   7 * Original code by John Dorsey
   8 *
   9 * This file contains all generic SA1111 support.
  10 *
  11 * All initialization functions provided here are intended to be called
  12 * from machine specific code with proper arguments when required.
  13 */
  14#include <linux/module.h>
  15#include <linux/gpio/driver.h>
  16#include <linux/init.h>
  17#include <linux/irq.h>
  18#include <linux/kernel.h>
  19#include <linux/delay.h>
  20#include <linux/errno.h>
  21#include <linux/ioport.h>
  22#include <linux/platform_device.h>
  23#include <linux/slab.h>
  24#include <linux/spinlock.h>
  25#include <linux/dma-mapping.h>
  26#include <linux/clk.h>
  27#include <linux/io.h>
  28
  29#include <mach/hardware.h>
  30#include <asm/mach/irq.h>
  31#include <asm/mach-types.h>
  32#include <linux/sizes.h>
  33
  34#include <asm/hardware/sa1111.h>
  35
  36/* SA1111 IRQs */
  37#define IRQ_GPAIN0              (0)
  38#define IRQ_GPAIN1              (1)
  39#define IRQ_GPAIN2              (2)
  40#define IRQ_GPAIN3              (3)
  41#define IRQ_GPBIN0              (4)
  42#define IRQ_GPBIN1              (5)
  43#define IRQ_GPBIN2              (6)
  44#define IRQ_GPBIN3              (7)
  45#define IRQ_GPBIN4              (8)
  46#define IRQ_GPBIN5              (9)
  47#define IRQ_GPCIN0              (10)
  48#define IRQ_GPCIN1              (11)
  49#define IRQ_GPCIN2              (12)
  50#define IRQ_GPCIN3              (13)
  51#define IRQ_GPCIN4              (14)
  52#define IRQ_GPCIN5              (15)
  53#define IRQ_GPCIN6              (16)
  54#define IRQ_GPCIN7              (17)
  55#define IRQ_MSTXINT             (18)
  56#define IRQ_MSRXINT             (19)
  57#define IRQ_MSSTOPERRINT        (20)
  58#define IRQ_TPTXINT             (21)
  59#define IRQ_TPRXINT             (22)
  60#define IRQ_TPSTOPERRINT        (23)
  61#define SSPXMTINT               (24)
  62#define SSPRCVINT               (25)
  63#define SSPROR                  (26)
  64#define AUDXMTDMADONEA          (32)
  65#define AUDRCVDMADONEA          (33)
  66#define AUDXMTDMADONEB          (34)
  67#define AUDRCVDMADONEB          (35)
  68#define AUDTFSR                 (36)
  69#define AUDRFSR                 (37)
  70#define AUDTUR                  (38)
  71#define AUDROR                  (39)
  72#define AUDDTS                  (40)
  73#define AUDRDD                  (41)
  74#define AUDSTO                  (42)
  75#define IRQ_USBPWR              (43)
  76#define IRQ_HCIM                (44)
  77#define IRQ_HCIBUFFACC          (45)
  78#define IRQ_HCIRMTWKP           (46)
  79#define IRQ_NHCIMFCIR           (47)
  80#define IRQ_USB_PORT_RESUME     (48)
  81#define IRQ_S0_READY_NINT       (49)
  82#define IRQ_S1_READY_NINT       (50)
  83#define IRQ_S0_CD_VALID         (51)
  84#define IRQ_S1_CD_VALID         (52)
  85#define IRQ_S0_BVD1_STSCHG      (53)
  86#define IRQ_S1_BVD1_STSCHG      (54)
  87#define SA1111_IRQ_NR           (55)
  88
  89extern void sa1110_mb_enable(void);
  90extern void sa1110_mb_disable(void);
  91
  92/*
  93 * We keep the following data for the overall SA1111.  Note that the
  94 * struct device and struct resource are "fake"; they should be supplied
  95 * by the bus above us.  However, in the interests of getting all SA1111
  96 * drivers converted over to the device model, we provide this as an
  97 * anchor point for all the other drivers.
  98 */
  99struct sa1111 {
 100        struct device   *dev;
 101        struct clk      *clk;
 102        unsigned long   phys;
 103        int             irq;
 104        int             irq_base;       /* base for cascaded on-chip IRQs */
 105        spinlock_t      lock;
 106        void __iomem    *base;
 107        struct sa1111_platform_data *pdata;
 108        struct irq_domain *irqdomain;
 109        struct gpio_chip gc;
 110#ifdef CONFIG_PM
 111        void            *saved_state;
 112#endif
 113};
 114
 115/*
 116 * We _really_ need to eliminate this.  Its only users
 117 * are the PWM and DMA checking code.
 118 */
 119static struct sa1111 *g_sa1111;
 120
 121struct sa1111_dev_info {
 122        unsigned long   offset;
 123        unsigned long   skpcr_mask;
 124        bool            dma;
 125        unsigned int    devid;
 126        unsigned int    hwirq[6];
 127};
 128
 129static struct sa1111_dev_info sa1111_devices[] = {
 130        {
 131                .offset         = SA1111_USB,
 132                .skpcr_mask     = SKPCR_UCLKEN,
 133                .dma            = true,
 134                .devid          = SA1111_DEVID_USB,
 135                .hwirq = {
 136                        IRQ_USBPWR,
 137                        IRQ_HCIM,
 138                        IRQ_HCIBUFFACC,
 139                        IRQ_HCIRMTWKP,
 140                        IRQ_NHCIMFCIR,
 141                        IRQ_USB_PORT_RESUME
 142                },
 143        },
 144        {
 145                .offset         = 0x0600,
 146                .skpcr_mask     = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
 147                .dma            = true,
 148                .devid          = SA1111_DEVID_SAC,
 149                .hwirq = {
 150                        AUDXMTDMADONEA,
 151                        AUDXMTDMADONEB,
 152                        AUDRCVDMADONEA,
 153                        AUDRCVDMADONEB
 154                },
 155        },
 156        {
 157                .offset         = 0x0800,
 158                .skpcr_mask     = SKPCR_SCLKEN,
 159                .devid          = SA1111_DEVID_SSP,
 160        },
 161        {
 162                .offset         = SA1111_KBD,
 163                .skpcr_mask     = SKPCR_PTCLKEN,
 164                .devid          = SA1111_DEVID_PS2_KBD,
 165                .hwirq = {
 166                        IRQ_TPRXINT,
 167                        IRQ_TPTXINT
 168                },
 169        },
 170        {
 171                .offset         = SA1111_MSE,
 172                .skpcr_mask     = SKPCR_PMCLKEN,
 173                .devid          = SA1111_DEVID_PS2_MSE,
 174                .hwirq = {
 175                        IRQ_MSRXINT,
 176                        IRQ_MSTXINT
 177                },
 178        },
 179        {
 180                .offset         = 0x1800,
 181                .skpcr_mask     = 0,
 182                .devid          = SA1111_DEVID_PCMCIA,
 183                .hwirq = {
 184                        IRQ_S0_READY_NINT,
 185                        IRQ_S0_CD_VALID,
 186                        IRQ_S0_BVD1_STSCHG,
 187                        IRQ_S1_READY_NINT,
 188                        IRQ_S1_CD_VALID,
 189                        IRQ_S1_BVD1_STSCHG,
 190                },
 191        },
 192};
 193
 194static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
 195{
 196        return irq_create_mapping(sachip->irqdomain, hwirq);
 197}
 198
 199static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq)
 200{
 201        struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq));
 202
 203        if (d)
 204                generic_handle_irq_desc(d);
 205}
 206
 207/*
 208 * SA1111 interrupt support.  Since clearing an IRQ while there are
 209 * active IRQs causes the interrupt output to pulse, the upper levels
 210 * will call us again if there are more interrupts to process.
 211 */
 212static void sa1111_irq_handler(struct irq_desc *desc)
 213{
 214        unsigned int stat0, stat1, i;
 215        struct sa1111 *sachip = irq_desc_get_handler_data(desc);
 216        struct irq_domain *irqdomain;
 217        void __iomem *mapbase = sachip->base + SA1111_INTC;
 218
 219        stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
 220        stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
 221
 222        writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
 223
 224        desc->irq_data.chip->irq_ack(&desc->irq_data);
 225
 226        writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
 227
 228        if (stat0 == 0 && stat1 == 0) {
 229                do_bad_IRQ(desc);
 230                return;
 231        }
 232
 233        irqdomain = sachip->irqdomain;
 234
 235        for (i = 0; stat0; i++, stat0 >>= 1)
 236                if (stat0 & 1)
 237                        sa1111_handle_irqdomain(irqdomain, i);
 238
 239        for (i = 32; stat1; i++, stat1 >>= 1)
 240                if (stat1 & 1)
 241                        sa1111_handle_irqdomain(irqdomain, i);
 242
 243        /* For level-based interrupts */
 244        desc->irq_data.chip->irq_unmask(&desc->irq_data);
 245}
 246
 247static u32 sa1111_irqmask(struct irq_data *d)
 248{
 249        return BIT(irqd_to_hwirq(d) & 31);
 250}
 251
 252static int sa1111_irqbank(struct irq_data *d)
 253{
 254        return (irqd_to_hwirq(d) / 32) * 4;
 255}
 256
 257static void sa1111_ack_irq(struct irq_data *d)
 258{
 259}
 260
 261static void sa1111_mask_irq(struct irq_data *d)
 262{
 263        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 264        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 265        u32 ie;
 266
 267        ie = readl_relaxed(mapbase + SA1111_INTEN0);
 268        ie &= ~sa1111_irqmask(d);
 269        writel(ie, mapbase + SA1111_INTEN0);
 270}
 271
 272static void sa1111_unmask_irq(struct irq_data *d)
 273{
 274        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 275        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 276        u32 ie;
 277
 278        ie = readl_relaxed(mapbase + SA1111_INTEN0);
 279        ie |= sa1111_irqmask(d);
 280        writel_relaxed(ie, mapbase + SA1111_INTEN0);
 281}
 282
 283/*
 284 * Attempt to re-trigger the interrupt.  The SA1111 contains a register
 285 * (INTSET) which claims to do this.  However, in practice no amount of
 286 * manipulation of INTEN and INTSET guarantees that the interrupt will
 287 * be triggered.  In fact, its very difficult, if not impossible to get
 288 * INTSET to re-trigger the interrupt.
 289 */
 290static int sa1111_retrigger_irq(struct irq_data *d)
 291{
 292        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 293        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 294        u32 ip, mask = sa1111_irqmask(d);
 295        int i;
 296
 297        ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 298        for (i = 0; i < 8; i++) {
 299                writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
 300                writel_relaxed(ip, mapbase + SA1111_INTPOL0);
 301                if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
 302                        break;
 303        }
 304
 305        if (i == 8) {
 306                pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
 307                       d->irq);
 308                return 0;
 309        }
 310
 311        return 1;
 312}
 313
 314static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
 315{
 316        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 317        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 318        u32 ip, mask = sa1111_irqmask(d);
 319
 320        if (flags == IRQ_TYPE_PROBE)
 321                return 0;
 322
 323        if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 324                return -EINVAL;
 325
 326        ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 327        if (flags & IRQ_TYPE_EDGE_RISING)
 328                ip &= ~mask;
 329        else
 330                ip |= mask;
 331        writel_relaxed(ip, mapbase + SA1111_INTPOL0);
 332        writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
 333
 334        return 0;
 335}
 336
 337static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
 338{
 339        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 340        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 341        u32 we, mask = sa1111_irqmask(d);
 342
 343        we = readl_relaxed(mapbase + SA1111_WAKEEN0);
 344        if (on)
 345                we |= mask;
 346        else
 347                we &= ~mask;
 348        writel_relaxed(we, mapbase + SA1111_WAKEEN0);
 349
 350        return 0;
 351}
 352
 353static struct irq_chip sa1111_irq_chip = {
 354        .name           = "SA1111",
 355        .irq_ack        = sa1111_ack_irq,
 356        .irq_mask       = sa1111_mask_irq,
 357        .irq_unmask     = sa1111_unmask_irq,
 358        .irq_retrigger  = sa1111_retrigger_irq,
 359        .irq_set_type   = sa1111_type_irq,
 360        .irq_set_wake   = sa1111_wake_irq,
 361};
 362
 363static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
 364        irq_hw_number_t hwirq)
 365{
 366        struct sa1111 *sachip = d->host_data;
 367
 368        /* Disallow unavailable interrupts */
 369        if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
 370                return -EINVAL;
 371
 372        irq_set_chip_data(irq, sachip);
 373        irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
 374        irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 375
 376        return 0;
 377}
 378
 379static const struct irq_domain_ops sa1111_irqdomain_ops = {
 380        .map = sa1111_irqdomain_map,
 381        .xlate = irq_domain_xlate_twocell,
 382};
 383
 384static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 385{
 386        void __iomem *irqbase = sachip->base + SA1111_INTC;
 387        int ret;
 388
 389        /*
 390         * We're guaranteed that this region hasn't been taken.
 391         */
 392        request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
 393
 394        ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
 395        if (ret <= 0) {
 396                dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
 397                        SA1111_IRQ_NR, ret);
 398                if (ret == 0)
 399                        ret = -EINVAL;
 400                return ret;
 401        }
 402
 403        sachip->irq_base = ret;
 404
 405        /* disable all IRQs */
 406        writel_relaxed(0, irqbase + SA1111_INTEN0);
 407        writel_relaxed(0, irqbase + SA1111_INTEN1);
 408        writel_relaxed(0, irqbase + SA1111_WAKEEN0);
 409        writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 410
 411        /*
 412         * detect on rising edge.  Note: Feb 2001 Errata for SA1111
 413         * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 414         */
 415        writel_relaxed(0, irqbase + SA1111_INTPOL0);
 416        writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
 417                       BIT(IRQ_S1_READY_NINT & 31),
 418                       irqbase + SA1111_INTPOL1);
 419
 420        /* clear all IRQs */
 421        writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
 422        writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 423
 424        sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
 425                                                  &sa1111_irqdomain_ops,
 426                                                  sachip);
 427        if (!sachip->irqdomain) {
 428                irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 429                return -ENOMEM;
 430        }
 431
 432        irq_domain_associate_many(sachip->irqdomain,
 433                                  sachip->irq_base + IRQ_GPAIN0,
 434                                  IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
 435        irq_domain_associate_many(sachip->irqdomain,
 436                                  sachip->irq_base + AUDXMTDMADONEA,
 437                                  AUDXMTDMADONEA,
 438                                  IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
 439
 440        /*
 441         * Register SA1111 interrupt
 442         */
 443        irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 444        irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
 445                                         sachip);
 446
 447        dev_info(sachip->dev, "Providing IRQ%u-%u\n",
 448                sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
 449
 450        return 0;
 451}
 452
 453static void sa1111_remove_irq(struct sa1111 *sachip)
 454{
 455        struct irq_domain *domain = sachip->irqdomain;
 456        void __iomem *irqbase = sachip->base + SA1111_INTC;
 457        int i;
 458
 459        /* disable all IRQs */
 460        writel_relaxed(0, irqbase + SA1111_INTEN0);
 461        writel_relaxed(0, irqbase + SA1111_INTEN1);
 462        writel_relaxed(0, irqbase + SA1111_WAKEEN0);
 463        writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 464
 465        irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
 466        for (i = 0; i < SA1111_IRQ_NR; i++)
 467                irq_dispose_mapping(irq_find_mapping(domain, i));
 468        irq_domain_remove(domain);
 469
 470        release_mem_region(sachip->phys + SA1111_INTC, 512);
 471}
 472
 473enum {
 474        SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
 475        SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
 476        SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
 477        SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
 478        SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
 479};
 480
 481static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
 482{
 483        return container_of(gc, struct sa1111, gc);
 484}
 485
 486static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
 487{
 488        void __iomem *reg = sachip->base + SA1111_GPIO;
 489
 490        if (offset < 4)
 491                return reg + SA1111_GPIO_PADDR;
 492        if (offset < 10)
 493                return reg + SA1111_GPIO_PBDDR;
 494        if (offset < 18)
 495                return reg + SA1111_GPIO_PCDDR;
 496        return NULL;
 497}
 498
 499static u32 sa1111_gpio_map_bit(unsigned offset)
 500{
 501        if (offset < 4)
 502                return BIT(offset);
 503        if (offset < 10)
 504                return BIT(offset - 4);
 505        if (offset < 18)
 506                return BIT(offset - 10);
 507        return 0;
 508}
 509
 510static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
 511{
 512        u32 val;
 513
 514        val = readl_relaxed(reg);
 515        val &= ~mask;
 516        val |= mask & set;
 517        writel_relaxed(val, reg);
 518}
 519
 520static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 521{
 522        struct sa1111 *sachip = gc_to_sa1111(gc);
 523        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 524        u32 mask = sa1111_gpio_map_bit(offset);
 525
 526        return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
 527}
 528
 529static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
 530{
 531        struct sa1111 *sachip = gc_to_sa1111(gc);
 532        unsigned long flags;
 533        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 534        u32 mask = sa1111_gpio_map_bit(offset);
 535
 536        spin_lock_irqsave(&sachip->lock, flags);
 537        sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
 538        sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
 539        spin_unlock_irqrestore(&sachip->lock, flags);
 540
 541        return 0;
 542}
 543
 544static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
 545        int value)
 546{
 547        struct sa1111 *sachip = gc_to_sa1111(gc);
 548        unsigned long flags;
 549        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 550        u32 mask = sa1111_gpio_map_bit(offset);
 551
 552        spin_lock_irqsave(&sachip->lock, flags);
 553        sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 554        sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 555        sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
 556        sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
 557        spin_unlock_irqrestore(&sachip->lock, flags);
 558
 559        return 0;
 560}
 561
 562static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
 563{
 564        struct sa1111 *sachip = gc_to_sa1111(gc);
 565        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 566        u32 mask = sa1111_gpio_map_bit(offset);
 567
 568        return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
 569}
 570
 571static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 572{
 573        struct sa1111 *sachip = gc_to_sa1111(gc);
 574        unsigned long flags;
 575        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 576        u32 mask = sa1111_gpio_map_bit(offset);
 577
 578        spin_lock_irqsave(&sachip->lock, flags);
 579        sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 580        sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 581        spin_unlock_irqrestore(&sachip->lock, flags);
 582}
 583
 584static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 585        unsigned long *bits)
 586{
 587        struct sa1111 *sachip = gc_to_sa1111(gc);
 588        unsigned long flags;
 589        void __iomem *reg = sachip->base + SA1111_GPIO;
 590        u32 msk, val;
 591
 592        msk = *mask;
 593        val = *bits;
 594
 595        spin_lock_irqsave(&sachip->lock, flags);
 596        sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
 597        sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
 598        sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
 599        sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
 600        sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
 601        sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
 602        spin_unlock_irqrestore(&sachip->lock, flags);
 603}
 604
 605static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 606{
 607        struct sa1111 *sachip = gc_to_sa1111(gc);
 608
 609        return sa1111_map_irq(sachip, offset);
 610}
 611
 612static int sa1111_setup_gpios(struct sa1111 *sachip)
 613{
 614        sachip->gc.label = "sa1111";
 615        sachip->gc.parent = sachip->dev;
 616        sachip->gc.owner = THIS_MODULE;
 617        sachip->gc.get_direction = sa1111_gpio_get_direction;
 618        sachip->gc.direction_input = sa1111_gpio_direction_input;
 619        sachip->gc.direction_output = sa1111_gpio_direction_output;
 620        sachip->gc.get = sa1111_gpio_get;
 621        sachip->gc.set = sa1111_gpio_set;
 622        sachip->gc.set_multiple = sa1111_gpio_set_multiple;
 623        sachip->gc.to_irq = sa1111_gpio_to_irq;
 624        sachip->gc.base = -1;
 625        sachip->gc.ngpio = 18;
 626
 627        return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
 628}
 629
 630/*
 631 * Bring the SA1111 out of reset.  This requires a set procedure:
 632 *  1. nRESET asserted (by hardware)
 633 *  2. CLK turned on from SA1110
 634 *  3. nRESET deasserted
 635 *  4. VCO turned on, PLL_BYPASS turned off
 636 *  5. Wait lock time, then assert RCLKEn
 637 *  7. PCR set to allow clocking of individual functions
 638 *
 639 * Until we've done this, the only registers we can access are:
 640 *   SBI_SKCR
 641 *   SBI_SMCR
 642 *   SBI_SKID
 643 */
 644static void sa1111_wake(struct sa1111 *sachip)
 645{
 646        unsigned long flags, r;
 647
 648        spin_lock_irqsave(&sachip->lock, flags);
 649
 650        clk_enable(sachip->clk);
 651
 652        /*
 653         * Turn VCO on, and disable PLL Bypass.
 654         */
 655        r = readl_relaxed(sachip->base + SA1111_SKCR);
 656        r &= ~SKCR_VCO_OFF;
 657        writel_relaxed(r, sachip->base + SA1111_SKCR);
 658        r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
 659        writel_relaxed(r, sachip->base + SA1111_SKCR);
 660
 661        /*
 662         * Wait lock time.  SA1111 manual _doesn't_
 663         * specify a figure for this!  We choose 100us.
 664         */
 665        udelay(100);
 666
 667        /*
 668         * Enable RCLK.  We also ensure that RDYEN is set.
 669         */
 670        r |= SKCR_RCLKEN | SKCR_RDYEN;
 671        writel_relaxed(r, sachip->base + SA1111_SKCR);
 672
 673        /*
 674         * Wait 14 RCLK cycles for the chip to finish coming out
 675         * of reset. (RCLK=24MHz).  This is 590ns.
 676         */
 677        udelay(1);
 678
 679        /*
 680         * Ensure all clocks are initially off.
 681         */
 682        writel_relaxed(0, sachip->base + SA1111_SKPCR);
 683
 684        spin_unlock_irqrestore(&sachip->lock, flags);
 685}
 686
 687#ifdef CONFIG_ARCH_SA1100
 688
 689static u32 sa1111_dma_mask[] = {
 690        ~0,
 691        ~(1 << 20),
 692        ~(1 << 23),
 693        ~(1 << 24),
 694        ~(1 << 25),
 695        ~(1 << 20),
 696        ~(1 << 20),
 697        0,
 698};
 699
 700/*
 701 * Configure the SA1111 shared memory controller.
 702 */
 703void
 704sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 705                     unsigned int cas_latency)
 706{
 707        unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
 708
 709        if (cas_latency == 3)
 710                smcr |= SMCR_CLAT;
 711
 712        writel_relaxed(smcr, sachip->base + SA1111_SMCR);
 713
 714        /*
 715         * Now clear the bits in the DMA mask to work around the SA1111
 716         * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
 717         * Chip Specification Update, June 2000, Erratum #7).
 718         */
 719        if (sachip->dev->dma_mask)
 720                *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
 721
 722        sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
 723}
 724#endif
 725
 726static void sa1111_dev_release(struct device *_dev)
 727{
 728        struct sa1111_dev *dev = to_sa1111_device(_dev);
 729
 730        kfree(dev);
 731}
 732
 733static int
 734sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 735                      struct sa1111_dev_info *info)
 736{
 737        struct sa1111_dev *dev;
 738        unsigned i;
 739        int ret;
 740
 741        dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
 742        if (!dev) {
 743                ret = -ENOMEM;
 744                goto err_alloc;
 745        }
 746
 747        device_initialize(&dev->dev);
 748        dev_set_name(&dev->dev, "%4.4lx", info->offset);
 749        dev->devid       = info->devid;
 750        dev->dev.parent  = sachip->dev;
 751        dev->dev.bus     = &sa1111_bus_type;
 752        dev->dev.release = sa1111_dev_release;
 753        dev->res.start   = sachip->phys + info->offset;
 754        dev->res.end     = dev->res.start + 511;
 755        dev->res.name    = dev_name(&dev->dev);
 756        dev->res.flags   = IORESOURCE_MEM;
 757        dev->mapbase     = sachip->base + info->offset;
 758        dev->skpcr_mask  = info->skpcr_mask;
 759
 760        for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
 761                dev->hwirq[i] = info->hwirq[i];
 762
 763        /*
 764         * If the parent device has a DMA mask associated with it, and
 765         * this child supports DMA, propagate it down to the children.
 766         */
 767        if (info->dma && sachip->dev->dma_mask) {
 768                dev->dma_mask = *sachip->dev->dma_mask;
 769                dev->dev.dma_mask = &dev->dma_mask;
 770                dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 771        }
 772
 773        ret = request_resource(parent, &dev->res);
 774        if (ret) {
 775                dev_err(sachip->dev, "failed to allocate resource for %s\n",
 776                        dev->res.name);
 777                goto err_resource;
 778        }
 779
 780        ret = device_add(&dev->dev);
 781        if (ret)
 782                goto err_add;
 783        return 0;
 784
 785 err_add:
 786        release_resource(&dev->res);
 787 err_resource:
 788        put_device(&dev->dev);
 789 err_alloc:
 790        return ret;
 791}
 792
 793/**
 794 *      sa1111_probe - probe for a single SA1111 chip.
 795 *      @phys_addr: physical address of device.
 796 *
 797 *      Probe for a SA1111 chip.  This must be called
 798 *      before any other SA1111-specific code.
 799 *
 800 *      Returns:
 801 *      %-ENODEV        device not found.
 802 *      %-EBUSY         physical address already marked in-use.
 803 *      %-EINVAL        no platform data passed
 804 *      %0              successful.
 805 */
 806static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 807{
 808        struct sa1111_platform_data *pd = me->platform_data;
 809        struct sa1111 *sachip;
 810        unsigned long id;
 811        unsigned int has_devs;
 812        int i, ret = -ENODEV;
 813
 814        if (!pd)
 815                return -EINVAL;
 816
 817        sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
 818        if (!sachip)
 819                return -ENOMEM;
 820
 821        sachip->clk = devm_clk_get(me, "SA1111_CLK");
 822        if (IS_ERR(sachip->clk))
 823                return PTR_ERR(sachip->clk);
 824
 825        ret = clk_prepare(sachip->clk);
 826        if (ret)
 827                return ret;
 828
 829        spin_lock_init(&sachip->lock);
 830
 831        sachip->dev = me;
 832        dev_set_drvdata(sachip->dev, sachip);
 833
 834        sachip->pdata = pd;
 835        sachip->phys = mem->start;
 836        sachip->irq = irq;
 837
 838        /*
 839         * Map the whole region.  This also maps the
 840         * registers for our children.
 841         */
 842        sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
 843        if (!sachip->base) {
 844                ret = -ENOMEM;
 845                goto err_clk_unprep;
 846        }
 847
 848        /*
 849         * Probe for the chip.  Only touch the SBI registers.
 850         */
 851        id = readl_relaxed(sachip->base + SA1111_SKID);
 852        if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 853                printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
 854                ret = -ENODEV;
 855                goto err_unmap;
 856        }
 857
 858        pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
 859                (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
 860
 861        /*
 862         * We found it.  Wake the chip up, and initialise.
 863         */
 864        sa1111_wake(sachip);
 865
 866        /*
 867         * The interrupt controller must be initialised before any
 868         * other device to ensure that the interrupts are available.
 869         */
 870        ret = sa1111_setup_irq(sachip, pd->irq_base);
 871        if (ret)
 872                goto err_clk;
 873
 874        /* Setup the GPIOs - should really be done after the IRQ setup */
 875        ret = sa1111_setup_gpios(sachip);
 876        if (ret)
 877                goto err_irq;
 878
 879#ifdef CONFIG_ARCH_SA1100
 880        {
 881        unsigned int val;
 882
 883        /*
 884         * The SDRAM configuration of the SA1110 and the SA1111 must
 885         * match.  This is very important to ensure that SA1111 accesses
 886         * don't corrupt the SDRAM.  Note that this ungates the SA1111's
 887         * MBGNT signal, so we must have called sa1110_mb_disable()
 888         * beforehand.
 889         */
 890        sa1111_configure_smc(sachip, 1,
 891                             FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
 892                             FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
 893
 894        /*
 895         * We only need to turn on DCLK whenever we want to use the
 896         * DMA.  It can otherwise be held firmly in the off position.
 897         * (currently, we always enable it.)
 898         */
 899        val = readl_relaxed(sachip->base + SA1111_SKPCR);
 900        writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
 901
 902        /*
 903         * Enable the SA1110 memory bus request and grant signals.
 904         */
 905        sa1110_mb_enable();
 906        }
 907#endif
 908
 909        g_sa1111 = sachip;
 910
 911        has_devs = ~0;
 912        if (pd)
 913                has_devs &= ~pd->disable_devs;
 914
 915        for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
 916                if (sa1111_devices[i].devid & has_devs)
 917                        sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
 918
 919        return 0;
 920
 921 err_irq:
 922        sa1111_remove_irq(sachip);
 923 err_clk:
 924        clk_disable(sachip->clk);
 925 err_unmap:
 926        iounmap(sachip->base);
 927 err_clk_unprep:
 928        clk_unprepare(sachip->clk);
 929        return ret;
 930}
 931
 932static int sa1111_remove_one(struct device *dev, void *data)
 933{
 934        struct sa1111_dev *sadev = to_sa1111_device(dev);
 935        if (dev->bus != &sa1111_bus_type)
 936                return 0;
 937        device_del(&sadev->dev);
 938        release_resource(&sadev->res);
 939        put_device(&sadev->dev);
 940        return 0;
 941}
 942
 943static void __sa1111_remove(struct sa1111 *sachip)
 944{
 945        device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
 946
 947        sa1111_remove_irq(sachip);
 948
 949        clk_disable(sachip->clk);
 950        clk_unprepare(sachip->clk);
 951
 952        iounmap(sachip->base);
 953}
 954
 955struct sa1111_save_data {
 956        unsigned int    skcr;
 957        unsigned int    skpcr;
 958        unsigned int    skcdr;
 959        unsigned char   skaud;
 960        unsigned char   skpwm0;
 961        unsigned char   skpwm1;
 962
 963        /*
 964         * Interrupt controller
 965         */
 966        unsigned int    intpol0;
 967        unsigned int    intpol1;
 968        unsigned int    inten0;
 969        unsigned int    inten1;
 970        unsigned int    wakepol0;
 971        unsigned int    wakepol1;
 972        unsigned int    wakeen0;
 973        unsigned int    wakeen1;
 974};
 975
 976#ifdef CONFIG_PM
 977
 978static int sa1111_suspend_noirq(struct device *dev)
 979{
 980        struct sa1111 *sachip = dev_get_drvdata(dev);
 981        struct sa1111_save_data *save;
 982        unsigned long flags;
 983        unsigned int val;
 984        void __iomem *base;
 985
 986        save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 987        if (!save)
 988                return -ENOMEM;
 989        sachip->saved_state = save;
 990
 991        spin_lock_irqsave(&sachip->lock, flags);
 992
 993        /*
 994         * Save state.
 995         */
 996        base = sachip->base;
 997        save->skcr     = readl_relaxed(base + SA1111_SKCR);
 998        save->skpcr    = readl_relaxed(base + SA1111_SKPCR);
 999        save->skcdr    = readl_relaxed(base + SA1111_SKCDR);
1000        save->skaud    = readl_relaxed(base + SA1111_SKAUD);
1001        save->skpwm0   = readl_relaxed(base + SA1111_SKPWM0);
1002        save->skpwm1   = readl_relaxed(base + SA1111_SKPWM1);
1003
1004        writel_relaxed(0, sachip->base + SA1111_SKPWM0);
1005        writel_relaxed(0, sachip->base + SA1111_SKPWM1);
1006
1007        base = sachip->base + SA1111_INTC;
1008        save->intpol0  = readl_relaxed(base + SA1111_INTPOL0);
1009        save->intpol1  = readl_relaxed(base + SA1111_INTPOL1);
1010        save->inten0   = readl_relaxed(base + SA1111_INTEN0);
1011        save->inten1   = readl_relaxed(base + SA1111_INTEN1);
1012        save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
1013        save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
1014        save->wakeen0  = readl_relaxed(base + SA1111_WAKEEN0);
1015        save->wakeen1  = readl_relaxed(base + SA1111_WAKEEN1);
1016
1017        /*
1018         * Disable.
1019         */
1020        val = readl_relaxed(sachip->base + SA1111_SKCR);
1021        writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1022
1023        clk_disable(sachip->clk);
1024
1025        spin_unlock_irqrestore(&sachip->lock, flags);
1026
1027#ifdef CONFIG_ARCH_SA1100
1028        sa1110_mb_disable();
1029#endif
1030
1031        return 0;
1032}
1033
1034/*
1035 *      sa1111_resume - Restore the SA1111 device state.
1036 *      @dev: device to restore
1037 *
1038 *      Restore the general state of the SA1111; clock control and
1039 *      interrupt controller.  Other parts of the SA1111 must be
1040 *      restored by their respective drivers, and must be called
1041 *      via LDM after this function.
1042 */
1043static int sa1111_resume_noirq(struct device *dev)
1044{
1045        struct sa1111 *sachip = dev_get_drvdata(dev);
1046        struct sa1111_save_data *save;
1047        unsigned long flags, id;
1048        void __iomem *base;
1049
1050        save = sachip->saved_state;
1051        if (!save)
1052                return 0;
1053
1054        /*
1055         * Ensure that the SA1111 is still here.
1056         * FIXME: shouldn't do this here.
1057         */
1058        id = readl_relaxed(sachip->base + SA1111_SKID);
1059        if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1060                __sa1111_remove(sachip);
1061                dev_set_drvdata(dev, NULL);
1062                kfree(save);
1063                return 0;
1064        }
1065
1066        /*
1067         * First of all, wake up the chip.
1068         */
1069        sa1111_wake(sachip);
1070
1071#ifdef CONFIG_ARCH_SA1100
1072        /* Enable the memory bus request/grant signals */
1073        sa1110_mb_enable();
1074#endif
1075
1076        /*
1077         * Only lock for write ops. Also, sa1111_wake must be called with
1078         * released spinlock!
1079         */
1080        spin_lock_irqsave(&sachip->lock, flags);
1081
1082        writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1083        writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1084
1085        base = sachip->base;
1086        writel_relaxed(save->skcr,     base + SA1111_SKCR);
1087        writel_relaxed(save->skpcr,    base + SA1111_SKPCR);
1088        writel_relaxed(save->skcdr,    base + SA1111_SKCDR);
1089        writel_relaxed(save->skaud,    base + SA1111_SKAUD);
1090        writel_relaxed(save->skpwm0,   base + SA1111_SKPWM0);
1091        writel_relaxed(save->skpwm1,   base + SA1111_SKPWM1);
1092
1093        base = sachip->base + SA1111_INTC;
1094        writel_relaxed(save->intpol0,  base + SA1111_INTPOL0);
1095        writel_relaxed(save->intpol1,  base + SA1111_INTPOL1);
1096        writel_relaxed(save->inten0,   base + SA1111_INTEN0);
1097        writel_relaxed(save->inten1,   base + SA1111_INTEN1);
1098        writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1099        writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1100        writel_relaxed(save->wakeen0,  base + SA1111_WAKEEN0);
1101        writel_relaxed(save->wakeen1,  base + SA1111_WAKEEN1);
1102
1103        spin_unlock_irqrestore(&sachip->lock, flags);
1104
1105        sachip->saved_state = NULL;
1106        kfree(save);
1107
1108        return 0;
1109}
1110
1111#else
1112#define sa1111_suspend_noirq NULL
1113#define sa1111_resume_noirq  NULL
1114#endif
1115
1116static int sa1111_probe(struct platform_device *pdev)
1117{
1118        struct resource *mem;
1119        int irq;
1120
1121        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1122        if (!mem)
1123                return -EINVAL;
1124        irq = platform_get_irq(pdev, 0);
1125        if (irq < 0)
1126                return irq;
1127
1128        return __sa1111_probe(&pdev->dev, mem, irq);
1129}
1130
1131static int sa1111_remove(struct platform_device *pdev)
1132{
1133        struct sa1111 *sachip = platform_get_drvdata(pdev);
1134
1135        if (sachip) {
1136#ifdef CONFIG_PM
1137                kfree(sachip->saved_state);
1138                sachip->saved_state = NULL;
1139#endif
1140                __sa1111_remove(sachip);
1141                platform_set_drvdata(pdev, NULL);
1142        }
1143
1144        return 0;
1145}
1146
1147static struct dev_pm_ops sa1111_pm_ops = {
1148        .suspend_noirq = sa1111_suspend_noirq,
1149        .resume_noirq = sa1111_resume_noirq,
1150};
1151
1152/*
1153 *      Not sure if this should be on the system bus or not yet.
1154 *      We really want some way to register a system device at
1155 *      the per-machine level, and then have this driver pick
1156 *      up the registered devices.
1157 *
1158 *      We also need to handle the SDRAM configuration for
1159 *      PXA250/SA1110 machine classes.
1160 */
1161static struct platform_driver sa1111_device_driver = {
1162        .probe          = sa1111_probe,
1163        .remove         = sa1111_remove,
1164        .driver         = {
1165                .name   = "sa1111",
1166                .pm     = &sa1111_pm_ops,
1167        },
1168};
1169
1170/*
1171 *      Get the parent device driver (us) structure
1172 *      from a child function device
1173 */
1174static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1175{
1176        return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1177}
1178
1179/*
1180 * The bits in the opdiv field are non-linear.
1181 */
1182static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1183
1184static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1185{
1186        unsigned int skcdr, fbdiv, ipdiv, opdiv;
1187
1188        skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1189
1190        fbdiv = (skcdr & 0x007f) + 2;
1191        ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1192        opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1193
1194        return 3686400 * fbdiv / (ipdiv * opdiv);
1195}
1196
1197/**
1198 *      sa1111_pll_clock - return the current PLL clock frequency.
1199 *      @sadev: SA1111 function block
1200 *
1201 *      BUG: we should look at SKCR.  We also blindly believe that
1202 *      the chip is being fed with the 3.6864MHz clock.
1203 *
1204 *      Returns the PLL clock in Hz.
1205 */
1206unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1207{
1208        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1209
1210        return __sa1111_pll_clock(sachip);
1211}
1212EXPORT_SYMBOL(sa1111_pll_clock);
1213
1214/**
1215 *      sa1111_select_audio_mode - select I2S or AC link mode
1216 *      @sadev: SA1111 function block
1217 *      @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1218 *
1219 *      Frob the SKCR to select AC Link mode or I2S mode for
1220 *      the audio block.
1221 */
1222void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1223{
1224        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1225        unsigned long flags;
1226        unsigned int val;
1227
1228        spin_lock_irqsave(&sachip->lock, flags);
1229
1230        val = readl_relaxed(sachip->base + SA1111_SKCR);
1231        if (mode == SA1111_AUDIO_I2S) {
1232                val &= ~SKCR_SELAC;
1233        } else {
1234                val |= SKCR_SELAC;
1235        }
1236        writel_relaxed(val, sachip->base + SA1111_SKCR);
1237
1238        spin_unlock_irqrestore(&sachip->lock, flags);
1239}
1240EXPORT_SYMBOL(sa1111_select_audio_mode);
1241
1242/**
1243 *      sa1111_set_audio_rate - set the audio sample rate
1244 *      @sadev: SA1111 SAC function block
1245 *      @rate: sample rate to select
1246 */
1247int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1248{
1249        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1250        unsigned int div;
1251
1252        if (sadev->devid != SA1111_DEVID_SAC)
1253                return -EINVAL;
1254
1255        div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1256        if (div == 0)
1257                div = 1;
1258        if (div > 128)
1259                div = 128;
1260
1261        writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1262
1263        return 0;
1264}
1265EXPORT_SYMBOL(sa1111_set_audio_rate);
1266
1267/**
1268 *      sa1111_get_audio_rate - get the audio sample rate
1269 *      @sadev: SA1111 SAC function block device
1270 */
1271int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1272{
1273        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1274        unsigned long div;
1275
1276        if (sadev->devid != SA1111_DEVID_SAC)
1277                return -EINVAL;
1278
1279        div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1280
1281        return __sa1111_pll_clock(sachip) / (256 * div);
1282}
1283EXPORT_SYMBOL(sa1111_get_audio_rate);
1284
1285/*
1286 * Individual device operations.
1287 */
1288
1289/**
1290 *      sa1111_enable_device - enable an on-chip SA1111 function block
1291 *      @sadev: SA1111 function block device to enable
1292 */
1293int sa1111_enable_device(struct sa1111_dev *sadev)
1294{
1295        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1296        unsigned long flags;
1297        unsigned int val;
1298        int ret = 0;
1299
1300        if (sachip->pdata && sachip->pdata->enable)
1301                ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1302
1303        if (ret == 0) {
1304                spin_lock_irqsave(&sachip->lock, flags);
1305                val = readl_relaxed(sachip->base + SA1111_SKPCR);
1306                writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1307                spin_unlock_irqrestore(&sachip->lock, flags);
1308        }
1309        return ret;
1310}
1311EXPORT_SYMBOL(sa1111_enable_device);
1312
1313/**
1314 *      sa1111_disable_device - disable an on-chip SA1111 function block
1315 *      @sadev: SA1111 function block device to disable
1316 */
1317void sa1111_disable_device(struct sa1111_dev *sadev)
1318{
1319        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1320        unsigned long flags;
1321        unsigned int val;
1322
1323        spin_lock_irqsave(&sachip->lock, flags);
1324        val = readl_relaxed(sachip->base + SA1111_SKPCR);
1325        writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1326        spin_unlock_irqrestore(&sachip->lock, flags);
1327
1328        if (sachip->pdata && sachip->pdata->disable)
1329                sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1330}
1331EXPORT_SYMBOL(sa1111_disable_device);
1332
1333int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1334{
1335        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1336        if (num >= ARRAY_SIZE(sadev->hwirq))
1337                return -EINVAL;
1338        return sa1111_map_irq(sachip, sadev->hwirq[num]);
1339}
1340EXPORT_SYMBOL_GPL(sa1111_get_irq);
1341
1342/*
1343 *      SA1111 "Register Access Bus."
1344 *
1345 *      We model this as a regular bus type, and hang devices directly
1346 *      off this.
1347 */
1348static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1349{
1350        struct sa1111_dev *dev = to_sa1111_device(_dev);
1351        struct sa1111_driver *drv = SA1111_DRV(_drv);
1352
1353        return !!(dev->devid & drv->devid);
1354}
1355
1356static int sa1111_bus_probe(struct device *dev)
1357{
1358        struct sa1111_dev *sadev = to_sa1111_device(dev);
1359        struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1360        int ret = -ENODEV;
1361
1362        if (drv->probe)
1363                ret = drv->probe(sadev);
1364        return ret;
1365}
1366
1367static int sa1111_bus_remove(struct device *dev)
1368{
1369        struct sa1111_dev *sadev = to_sa1111_device(dev);
1370        struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1371        int ret = 0;
1372
1373        if (drv->remove)
1374                ret = drv->remove(sadev);
1375        return ret;
1376}
1377
1378struct bus_type sa1111_bus_type = {
1379        .name           = "sa1111-rab",
1380        .match          = sa1111_match,
1381        .probe          = sa1111_bus_probe,
1382        .remove         = sa1111_bus_remove,
1383};
1384EXPORT_SYMBOL(sa1111_bus_type);
1385
1386int sa1111_driver_register(struct sa1111_driver *driver)
1387{
1388        driver->drv.bus = &sa1111_bus_type;
1389        return driver_register(&driver->drv);
1390}
1391EXPORT_SYMBOL(sa1111_driver_register);
1392
1393void sa1111_driver_unregister(struct sa1111_driver *driver)
1394{
1395        driver_unregister(&driver->drv);
1396}
1397EXPORT_SYMBOL(sa1111_driver_unregister);
1398
1399#ifdef CONFIG_DMABOUNCE
1400/*
1401 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
1402 * Chip Specification Update" (June 2000), erratum #7, there is a
1403 * significant bug in the SA1111 SDRAM shared memory controller.  If
1404 * an access to a region of memory above 1MB relative to the bank base,
1405 * it is important that address bit 10 _NOT_ be asserted. Depending
1406 * on the configuration of the RAM, bit 10 may correspond to one
1407 * of several different (processor-relative) address bits.
1408 *
1409 * This routine only identifies whether or not a given DMA address
1410 * is susceptible to the bug.
1411 *
1412 * This should only get called for sa1111_device types due to the
1413 * way we configure our device dma_masks.
1414 */
1415static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
1416{
1417        /*
1418         * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
1419         * User's Guide" mentions that jumpers R51 and R52 control the
1420         * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
1421         * SDRAM bank 1 on Neponset). The default configuration selects
1422         * Assabet, so any address in bank 1 is necessarily invalid.
1423         */
1424        return (machine_is_assabet() || machine_is_pfs168()) &&
1425                (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
1426}
1427
1428static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
1429        void *data)
1430{
1431        struct sa1111_dev *dev = to_sa1111_device(data);
1432
1433        switch (action) {
1434        case BUS_NOTIFY_ADD_DEVICE:
1435                if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
1436                        int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
1437                                        sa1111_needs_bounce);
1438                        if (ret)
1439                                dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
1440                }
1441                break;
1442
1443        case BUS_NOTIFY_DEL_DEVICE:
1444                if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
1445                        dmabounce_unregister_dev(&dev->dev);
1446                break;
1447        }
1448        return NOTIFY_OK;
1449}
1450
1451static struct notifier_block sa1111_bus_notifier = {
1452        .notifier_call = sa1111_notifier_call,
1453};
1454#endif
1455
1456static int __init sa1111_init(void)
1457{
1458        int ret = bus_register(&sa1111_bus_type);
1459#ifdef CONFIG_DMABOUNCE
1460        if (ret == 0)
1461                bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1462#endif
1463        if (ret == 0)
1464                platform_driver_register(&sa1111_device_driver);
1465        return ret;
1466}
1467
1468static void __exit sa1111_exit(void)
1469{
1470        platform_driver_unregister(&sa1111_device_driver);
1471#ifdef CONFIG_DMABOUNCE
1472        bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1473#endif
1474        bus_unregister(&sa1111_bus_type);
1475}
1476
1477subsys_initcall(sa1111_init);
1478module_exit(sa1111_exit);
1479
1480MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1481MODULE_LICENSE("GPL");
1482