|
|       x_unfl.sa 3.4 7/1/91
|
|       fpsp_unfl --- FPSP handler for underflow exception
|
| Trap disabled results
|       For 881/2 compatibility, sw must denormalize the intermediate
| result, then store the result.  Denormalization is accomplished
| by taking the intermediate result (which is always normalized) and
| shifting the mantissa right while incrementing the exponent until
| it is equal to the denormalized exponent for the destination
| format.  After denormalization, the result is rounded to the
| destination format.
|
| Trap enabled results
|       All trap disabled code applies. In addition the exceptional
| operand needs to made available to the user with a bias of $6000
| added to the exponent.
|

|               Copyright (C) Motorola, Inc. 1990
|                       All Rights Reserved
|
|       For details on the license for this file, please see the
|       file, README, in this same directory.

X_UNFL: |idnt    2,1 | Motorola 040 Floating Point Software Package

        |section        8

#include "fpsp.h"

        |xref   denorm
        |xref   round
        |xref   store
        |xref   g_rndpr
        |xref   g_opcls
        |xref   g_dfmtou
        |xref   real_unfl
        |xref   real_inex
        |xref   fpsp_done
        |xref   b1238_fix

        .global fpsp_unfl
fpsp_unfl:
        link            %a6,#-LOCAL_SIZE
        fsave           -(%a7)
        moveml          %d0-%d1/%a0-%a1,USER_DA(%a6)
        fmovemx %fp0-%fp3,USER_FP0(%a6)
        fmoveml %fpcr/%fpsr/%fpiar,USER_FPCR(%a6)

|
        bsrl            unf_res |denormalize, round & store interm op
|
| If underflow exceptions are not enabled, check for inexact
| exception
|
        btstb           #unfl_bit,FPCR_ENABLE(%a6)
        beqs            ck_inex

        btstb           #E3,E_BYTE(%a6)
        beqs            no_e3_1
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
        bfextu          CMDREG3B(%a6){#6:#3},%d0        |get dest reg no
        bclrb           %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
        bsrl            b1238_fix               |test for bug1238 case
        movel           USER_FPSR(%a6),FPSR_SHADOW(%a6)
        orl             #sx_mask,E_BYTE(%a6)
no_e3_1:
        moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
        fmovemx USER_FP0(%a6),%fp0-%fp3
        fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
        frestore        (%a7)+
        unlk            %a6
        bral            real_unfl
|
| It is possible to have either inex2 or inex1 exceptions with the
| unfl.  If the inex enable bit is set in the FPCR, and either
| inex2 or inex1 occurred, we must clean up and branch to the
| real inex handler.
|
ck_inex:
        moveb           FPCR_ENABLE(%a6),%d0
        andb            FPSR_EXCEPT(%a6),%d0
        andib           #0x3,%d0
        beqs            unfl_done

|
| Inexact enabled and reported, and we must take an inexact exception
|
take_inex:
        btstb           #E3,E_BYTE(%a6)
        beqs            no_e3_2
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
        bfextu          CMDREG3B(%a6){#6:#3},%d0        |get dest reg no
        bclrb           %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
        bsrl            b1238_fix               |test for bug1238 case
        movel           USER_FPSR(%a6),FPSR_SHADOW(%a6)
        orl             #sx_mask,E_BYTE(%a6)
no_e3_2:
        moveb           #INEX_VEC,EXC_VEC+1(%a6)
        moveml         USER_DA(%a6),%d0-%d1/%a0-%a1
        fmovemx        USER_FP0(%a6),%fp0-%fp3
        fmoveml        USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
        frestore        (%a7)+
        unlk            %a6
        bral            real_inex

unfl_done:
        bclrb           #E3,E_BYTE(%a6)
        beqs            e1_set          |if set then branch
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
        bfextu          CMDREG3B(%a6){#6:#3},%d0                |get dest reg no
        bclrb           %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
        bsrl            b1238_fix               |test for bug1238 case
        movel           USER_FPSR(%a6),FPSR_SHADOW(%a6)
        orl             #sx_mask,E_BYTE(%a6)
        moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
        fmovemx USER_FP0(%a6),%fp0-%fp3
        fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
        frestore        (%a7)+
        unlk            %a6
        bral            fpsp_done
e1_set:
        moveml          USER_DA(%a6),%d0-%d1/%a0-%a1
        fmovemx USER_FP0(%a6),%fp0-%fp3
        fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
        unlk            %a6
        bral            fpsp_done
|
|       unf_res --- underflow result calculation
|
unf_res:
        bsrl            g_rndpr         |returns RND_PREC in d0 0=ext,
|                                       ;1=sgl, 2=dbl
|                                       ;we need the RND_PREC in the
|                                       ;upper word for round
        movew           #0,-(%a7)
        movew           %d0,-(%a7)      |copy RND_PREC to stack
|
|
| If the exception bit set is E3, the exceptional operand from the
| fpu is in WBTEMP; else it is in FPTEMP.
|
        btstb           #E3,E_BYTE(%a6)
        beqs            unf_E1
unf_E3:
        lea             WBTEMP(%a6),%a0 |a0 now points to operand
|
| Test for fsgldiv and fsglmul.  If the inst was one of these, then
| force the precision to extended for the denorm routine.  Use
| the user's precision for the round routine.
|
        movew           CMDREG3B(%a6),%d1       |check for fsgldiv or fsglmul
        andiw           #0x7f,%d1
        cmpiw           #0x30,%d1               |check for sgldiv
        beqs            unf_sgl
        cmpiw           #0x33,%d1               |check for sglmul
        bnes            unf_cont        |if not, use fpcr prec in round
unf_sgl:
        clrl            %d0
        movew           #0x1,(%a7)      |override g_rndpr precision
|                                       ;force single
        bras            unf_cont
unf_E1:
        lea             FPTEMP(%a6),%a0 |a0 now points to operand
unf_cont:
        bclrb           #sign_bit,LOCAL_EX(%a0) |clear sign bit
        sne             LOCAL_SGN(%a0)          |store sign

        bsrl            denorm          |returns denorm, a0 points to it
|
| WARNING:
|                               ;d0 has guard,round sticky bit
|                               ;make sure that it is not corrupted
|                               ;before it reaches the round subroutine
|                               ;also ensure that a0 isn't corrupted

|
| Set up d1 for round subroutine d1 contains the PREC/MODE
| information respectively on upper/lower register halves.
|
        bfextu          FPCR_MODE(%a6){#2:#2},%d1       |get mode from FPCR
|                                               ;mode in lower d1
        addl            (%a7)+,%d1              |merge PREC/MODE
|
| WARNING: a0 and d0 are assumed to be intact between the denorm and
| round subroutines. All code between these two subroutines
| must not corrupt a0 and d0.
|
|
| Perform Round
|       Input:          a0 points to input operand
|                       d0{31:29} has guard, round, sticky
|                       d1{01:00} has rounding mode
|                       d1{17:16} has rounding precision
|       Output:         a0 points to rounded operand
|

        bsrl            round           |returns rounded denorm at (a0)
|
| Differentiate between store to memory vs. store to register
|
unf_store:
        bsrl            g_opcls         |returns opclass in d0{2:0}
        cmpib           #0x3,%d0
        bnes            not_opc011
|
| At this point, a store to memory is pending
|
opc011:
        bsrl            g_dfmtou
        tstb            %d0
        beqs            ext_opc011      |If extended, do not subtract
|                               ;If destination format is sgl/dbl,
        tstb            LOCAL_HI(%a0)   |If rounded result is normal,don't
|                                       ;subtract
        bmis            ext_opc011
        subqw           #1,LOCAL_EX(%a0)        |account for denorm bias vs.
|                               ;normalized bias
|                               ;          normalized   denormalized
|                               ;single       $7f           $7e
|                               ;double       $3ff          $3fe
|
ext_opc011:
        bsrl            store           |stores to memory
        bras            unf_done        |finish up

|
| At this point, a store to a float register is pending
|
not_opc011:
        bsrl            store   |stores to float register
|                               ;a0 is not corrupted on a store to a
|                               ;float register.
|
| Set the condition codes according to result
|
        tstl            LOCAL_HI(%a0)   |check upper mantissa
        bnes            ck_sgn
        tstl            LOCAL_LO(%a0)   |check lower mantissa
        bnes            ck_sgn
        bsetb           #z_bit,FPSR_CC(%a6) |set condition codes if zero
ck_sgn:
        btstb           #sign_bit,LOCAL_EX(%a0) |check the sign bit
        beqs            unf_done
        bsetb           #neg_bit,FPSR_CC(%a6)

|
| Finish.
|
unf_done:
        btstb           #inex2_bit,FPSR_EXCEPT(%a6)
        beqs            no_aunfl
        bsetb           #aunfl_bit,FPSR_AEXCEPT(%a6)
no_aunfl:
        rts

        |end