linux/arch/mips/kernel/perf_event_mipsxx.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Linux performance counter support for MIPS.
   4 *
   5 * Copyright (C) 2010 MIPS Technologies, Inc.
   6 * Copyright (C) 2011 Cavium Networks, Inc.
   7 * Author: Deng-Cheng Zhu
   8 *
   9 * This code is based on the implementation for ARM, which is in turn
  10 * based on the sparc64 perf event code and the x86 code. Performance
  11 * counter access is based on the MIPS Oprofile code. And the callchain
  12 * support references the code of MIPS stacktrace.c.
  13 */
  14
  15#include <linux/cpumask.h>
  16#include <linux/interrupt.h>
  17#include <linux/smp.h>
  18#include <linux/kernel.h>
  19#include <linux/perf_event.h>
  20#include <linux/uaccess.h>
  21
  22#include <asm/irq.h>
  23#include <asm/irq_regs.h>
  24#include <asm/stacktrace.h>
  25#include <asm/time.h> /* For perf_irq */
  26
  27#define MIPS_MAX_HWEVENTS 4
  28#define MIPS_TCS_PER_COUNTER 2
  29#define MIPS_CPUID_TO_COUNTER_MASK (MIPS_TCS_PER_COUNTER - 1)
  30
  31struct cpu_hw_events {
  32        /* Array of events on this cpu. */
  33        struct perf_event       *events[MIPS_MAX_HWEVENTS];
  34
  35        /*
  36         * Set the bit (indexed by the counter number) when the counter
  37         * is used for an event.
  38         */
  39        unsigned long           used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
  40
  41        /*
  42         * Software copy of the control register for each performance counter.
  43         * MIPS CPUs vary in performance counters. They use this differently,
  44         * and even may not use it.
  45         */
  46        unsigned int            saved_ctrl[MIPS_MAX_HWEVENTS];
  47};
  48DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
  49        .saved_ctrl = {0},
  50};
  51
  52/* The description of MIPS performance events. */
  53struct mips_perf_event {
  54        unsigned int event_id;
  55        /*
  56         * MIPS performance counters are indexed starting from 0.
  57         * CNTR_EVEN indicates the indexes of the counters to be used are
  58         * even numbers.
  59         */
  60        unsigned int cntr_mask;
  61        #define CNTR_EVEN       0x55555555
  62        #define CNTR_ODD        0xaaaaaaaa
  63        #define CNTR_ALL        0xffffffff
  64        enum {
  65                T  = 0,
  66                V  = 1,
  67                P  = 2,
  68        } range;
  69};
  70
  71static struct mips_perf_event raw_event;
  72static DEFINE_MUTEX(raw_event_mutex);
  73
  74#define C(x) PERF_COUNT_HW_CACHE_##x
  75
  76struct mips_pmu {
  77        u64             max_period;
  78        u64             valid_count;
  79        u64             overflow;
  80        const char      *name;
  81        int             irq;
  82        u64             (*read_counter)(unsigned int idx);
  83        void            (*write_counter)(unsigned int idx, u64 val);
  84        const struct mips_perf_event *(*map_raw_event)(u64 config);
  85        const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
  86        const struct mips_perf_event (*cache_event_map)
  87                                [PERF_COUNT_HW_CACHE_MAX]
  88                                [PERF_COUNT_HW_CACHE_OP_MAX]
  89                                [PERF_COUNT_HW_CACHE_RESULT_MAX];
  90        unsigned int    num_counters;
  91};
  92
  93static int counter_bits;
  94static struct mips_pmu mipspmu;
  95
  96#define M_PERFCTL_EVENT(event)          (((event) << MIPS_PERFCTRL_EVENT_S) & \
  97                                         MIPS_PERFCTRL_EVENT)
  98#define M_PERFCTL_VPEID(vpe)            ((vpe)    << MIPS_PERFCTRL_VPEID_S)
  99
 100#ifdef CONFIG_CPU_BMIPS5000
 101#define M_PERFCTL_MT_EN(filter)         0
 102#else /* !CONFIG_CPU_BMIPS5000 */
 103#define M_PERFCTL_MT_EN(filter)         (filter)
 104#endif /* CONFIG_CPU_BMIPS5000 */
 105
 106#define    M_TC_EN_ALL                  M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_ALL)
 107#define    M_TC_EN_VPE                  M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_VPE)
 108#define    M_TC_EN_TC                   M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_TC)
 109
 110#define M_PERFCTL_COUNT_EVENT_WHENEVER  (MIPS_PERFCTRL_EXL |            \
 111                                         MIPS_PERFCTRL_K |              \
 112                                         MIPS_PERFCTRL_U |              \
 113                                         MIPS_PERFCTRL_S |              \
 114                                         MIPS_PERFCTRL_IE)
 115
 116#ifdef CONFIG_MIPS_MT_SMP
 117#define M_PERFCTL_CONFIG_MASK           0x3fff801f
 118#else
 119#define M_PERFCTL_CONFIG_MASK           0x1f
 120#endif
 121
 122#define CNTR_BIT_MASK(n)        (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
 123
 124#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
 125static DEFINE_RWLOCK(pmuint_rwlock);
 126
 127#if defined(CONFIG_CPU_BMIPS5000)
 128#define vpe_id()        (cpu_has_mipsmt_pertccounters ? \
 129                         0 : (smp_processor_id() & MIPS_CPUID_TO_COUNTER_MASK))
 130#else
 131#define vpe_id()        (cpu_has_mipsmt_pertccounters ? \
 132                         0 : cpu_vpe_id(&current_cpu_data))
 133#endif
 134
 135/* Copied from op_model_mipsxx.c */
 136static unsigned int vpe_shift(void)
 137{
 138        if (num_possible_cpus() > 1)
 139                return 1;
 140
 141        return 0;
 142}
 143
 144static unsigned int counters_total_to_per_cpu(unsigned int counters)
 145{
 146        return counters >> vpe_shift();
 147}
 148
 149#else /* !CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
 150#define vpe_id()        0
 151
 152#endif /* CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
 153
 154static void resume_local_counters(void);
 155static void pause_local_counters(void);
 156static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
 157static int mipsxx_pmu_handle_shared_irq(void);
 158
 159/* 0: Not Loongson-3
 160 * 1: Loongson-3A1000/3B1000/3B1500
 161 * 2: Loongson-3A2000/3A3000
 162 * 3: Loongson-3A4000+
 163 */
 164
 165#define LOONGSON_PMU_TYPE0 0
 166#define LOONGSON_PMU_TYPE1 1
 167#define LOONGSON_PMU_TYPE2 2
 168#define LOONGSON_PMU_TYPE3 3
 169
 170static inline int get_loongson3_pmu_type(void)
 171{
 172        if (boot_cpu_type() != CPU_LOONGSON64)
 173                return LOONGSON_PMU_TYPE0;
 174        if ((boot_cpu_data.processor_id & PRID_COMP_MASK) == PRID_COMP_LEGACY)
 175                return LOONGSON_PMU_TYPE1;
 176        if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C)
 177                return LOONGSON_PMU_TYPE2;
 178        if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G)
 179                return LOONGSON_PMU_TYPE3;
 180
 181        return LOONGSON_PMU_TYPE0;
 182}
 183
 184static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
 185{
 186        if (vpe_id() == 1)
 187                idx = (idx + 2) & 3;
 188        return idx;
 189}
 190
 191static u64 mipsxx_pmu_read_counter(unsigned int idx)
 192{
 193        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 194
 195        switch (idx) {
 196        case 0:
 197                /*
 198                 * The counters are unsigned, we must cast to truncate
 199                 * off the high bits.
 200                 */
 201                return (u32)read_c0_perfcntr0();
 202        case 1:
 203                return (u32)read_c0_perfcntr1();
 204        case 2:
 205                return (u32)read_c0_perfcntr2();
 206        case 3:
 207                return (u32)read_c0_perfcntr3();
 208        default:
 209                WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
 210                return 0;
 211        }
 212}
 213
 214static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
 215{
 216        u64 mask = CNTR_BIT_MASK(counter_bits);
 217        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 218
 219        switch (idx) {
 220        case 0:
 221                return read_c0_perfcntr0_64() & mask;
 222        case 1:
 223                return read_c0_perfcntr1_64() & mask;
 224        case 2:
 225                return read_c0_perfcntr2_64() & mask;
 226        case 3:
 227                return read_c0_perfcntr3_64() & mask;
 228        default:
 229                WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
 230                return 0;
 231        }
 232}
 233
 234static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
 235{
 236        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 237
 238        switch (idx) {
 239        case 0:
 240                write_c0_perfcntr0(val);
 241                return;
 242        case 1:
 243                write_c0_perfcntr1(val);
 244                return;
 245        case 2:
 246                write_c0_perfcntr2(val);
 247                return;
 248        case 3:
 249                write_c0_perfcntr3(val);
 250                return;
 251        }
 252}
 253
 254static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
 255{
 256        val &= CNTR_BIT_MASK(counter_bits);
 257        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 258
 259        switch (idx) {
 260        case 0:
 261                write_c0_perfcntr0_64(val);
 262                return;
 263        case 1:
 264                write_c0_perfcntr1_64(val);
 265                return;
 266        case 2:
 267                write_c0_perfcntr2_64(val);
 268                return;
 269        case 3:
 270                write_c0_perfcntr3_64(val);
 271                return;
 272        }
 273}
 274
 275static unsigned int mipsxx_pmu_read_control(unsigned int idx)
 276{
 277        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 278
 279        switch (idx) {
 280        case 0:
 281                return read_c0_perfctrl0();
 282        case 1:
 283                return read_c0_perfctrl1();
 284        case 2:
 285                return read_c0_perfctrl2();
 286        case 3:
 287                return read_c0_perfctrl3();
 288        default:
 289                WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
 290                return 0;
 291        }
 292}
 293
 294static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
 295{
 296        idx = mipsxx_pmu_swizzle_perf_idx(idx);
 297
 298        switch (idx) {
 299        case 0:
 300                write_c0_perfctrl0(val);
 301                return;
 302        case 1:
 303                write_c0_perfctrl1(val);
 304                return;
 305        case 2:
 306                write_c0_perfctrl2(val);
 307                return;
 308        case 3:
 309                write_c0_perfctrl3(val);
 310                return;
 311        }
 312}
 313
 314static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
 315                                    struct hw_perf_event *hwc)
 316{
 317        int i;
 318        unsigned long cntr_mask;
 319
 320        /*
 321         * We only need to care the counter mask. The range has been
 322         * checked definitely.
 323         */
 324        if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
 325                cntr_mask = (hwc->event_base >> 10) & 0xffff;
 326        else
 327                cntr_mask = (hwc->event_base >> 8) & 0xffff;
 328
 329        for (i = mipspmu.num_counters - 1; i >= 0; i--) {
 330                /*
 331                 * Note that some MIPS perf events can be counted by both
 332                 * even and odd counters, wheresas many other are only by
 333                 * even _or_ odd counters. This introduces an issue that
 334                 * when the former kind of event takes the counter the
 335                 * latter kind of event wants to use, then the "counter
 336                 * allocation" for the latter event will fail. In fact if
 337                 * they can be dynamically swapped, they both feel happy.
 338                 * But here we leave this issue alone for now.
 339                 */
 340                if (test_bit(i, &cntr_mask) &&
 341                        !test_and_set_bit(i, cpuc->used_mask))
 342                        return i;
 343        }
 344
 345        return -EAGAIN;
 346}
 347
 348static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 349{
 350        struct perf_event *event = container_of(evt, struct perf_event, hw);
 351        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 352        unsigned int range = evt->event_base >> 24;
 353
 354        WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
 355
 356        if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
 357                cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0x3ff) |
 358                        (evt->config_base & M_PERFCTL_CONFIG_MASK) |
 359                        /* Make sure interrupt enabled. */
 360                        MIPS_PERFCTRL_IE;
 361        else
 362                cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
 363                        (evt->config_base & M_PERFCTL_CONFIG_MASK) |
 364                        /* Make sure interrupt enabled. */
 365                        MIPS_PERFCTRL_IE;
 366
 367        if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
 368                /* enable the counter for the calling thread */
 369                cpuc->saved_ctrl[idx] |=
 370                        (1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
 371        } else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
 372                /* The counter is processor wide. Set it up to count all TCs. */
 373                pr_debug("Enabling perf counter for all TCs\n");
 374                cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
 375        } else {
 376                unsigned int cpu, ctrl;
 377
 378                /*
 379                 * Set up the counter for a particular CPU when event->cpu is
 380                 * a valid CPU number. Otherwise set up the counter for the CPU
 381                 * scheduling this thread.
 382                 */
 383                cpu = (event->cpu >= 0) ? event->cpu : smp_processor_id();
 384
 385                ctrl = M_PERFCTL_VPEID(cpu_vpe_id(&cpu_data[cpu]));
 386                ctrl |= M_TC_EN_VPE;
 387                cpuc->saved_ctrl[idx] |= ctrl;
 388                pr_debug("Enabling perf counter for CPU%d\n", cpu);
 389        }
 390        /*
 391         * We do not actually let the counter run. Leave it until start().
 392         */
 393}
 394
 395static void mipsxx_pmu_disable_event(int idx)
 396{
 397        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 398        unsigned long flags;
 399
 400        WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
 401
 402        local_irq_save(flags);
 403        cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
 404                ~M_PERFCTL_COUNT_EVENT_WHENEVER;
 405        mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
 406        local_irq_restore(flags);
 407}
 408
 409static int mipspmu_event_set_period(struct perf_event *event,
 410                                    struct hw_perf_event *hwc,
 411                                    int idx)
 412{
 413        u64 left = local64_read(&hwc->period_left);
 414        u64 period = hwc->sample_period;
 415        int ret = 0;
 416
 417        if (unlikely((left + period) & (1ULL << 63))) {
 418                /* left underflowed by more than period. */
 419                left = period;
 420                local64_set(&hwc->period_left, left);
 421                hwc->last_period = period;
 422                ret = 1;
 423        } else  if (unlikely((left + period) <= period)) {
 424                /* left underflowed by less than period. */
 425                left += period;
 426                local64_set(&hwc->period_left, left);
 427                hwc->last_period = period;
 428                ret = 1;
 429        }
 430
 431        if (left > mipspmu.max_period) {
 432                left = mipspmu.max_period;
 433                local64_set(&hwc->period_left, left);
 434        }
 435
 436        local64_set(&hwc->prev_count, mipspmu.overflow - left);
 437
 438        if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
 439                mipsxx_pmu_write_control(idx,
 440                                M_PERFCTL_EVENT(hwc->event_base & 0x3ff));
 441
 442        mipspmu.write_counter(idx, mipspmu.overflow - left);
 443
 444        perf_event_update_userpage(event);
 445
 446        return ret;
 447}
 448
 449static void mipspmu_event_update(struct perf_event *event,
 450                                 struct hw_perf_event *hwc,
 451                                 int idx)
 452{
 453        u64 prev_raw_count, new_raw_count;
 454        u64 delta;
 455
 456again:
 457        prev_raw_count = local64_read(&hwc->prev_count);
 458        new_raw_count = mipspmu.read_counter(idx);
 459
 460        if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 461                                new_raw_count) != prev_raw_count)
 462                goto again;
 463
 464        delta = new_raw_count - prev_raw_count;
 465
 466        local64_add(delta, &event->count);
 467        local64_sub(delta, &hwc->period_left);
 468}
 469
 470static void mipspmu_start(struct perf_event *event, int flags)
 471{
 472        struct hw_perf_event *hwc = &event->hw;
 473
 474        if (flags & PERF_EF_RELOAD)
 475                WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
 476
 477        hwc->state = 0;
 478
 479        /* Set the period for the event. */
 480        mipspmu_event_set_period(event, hwc, hwc->idx);
 481
 482        /* Enable the event. */
 483        mipsxx_pmu_enable_event(hwc, hwc->idx);
 484}
 485
 486static void mipspmu_stop(struct perf_event *event, int flags)
 487{
 488        struct hw_perf_event *hwc = &event->hw;
 489
 490        if (!(hwc->state & PERF_HES_STOPPED)) {
 491                /* We are working on a local event. */
 492                mipsxx_pmu_disable_event(hwc->idx);
 493                barrier();
 494                mipspmu_event_update(event, hwc, hwc->idx);
 495                hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 496        }
 497}
 498
 499static int mipspmu_add(struct perf_event *event, int flags)
 500{
 501        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 502        struct hw_perf_event *hwc = &event->hw;
 503        int idx;
 504        int err = 0;
 505
 506        perf_pmu_disable(event->pmu);
 507
 508        /* To look for a free counter for this event. */
 509        idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
 510        if (idx < 0) {
 511                err = idx;
 512                goto out;
 513        }
 514
 515        /*
 516         * If there is an event in the counter we are going to use then
 517         * make sure it is disabled.
 518         */
 519        event->hw.idx = idx;
 520        mipsxx_pmu_disable_event(idx);
 521        cpuc->events[idx] = event;
 522
 523        hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
 524        if (flags & PERF_EF_START)
 525                mipspmu_start(event, PERF_EF_RELOAD);
 526
 527        /* Propagate our changes to the userspace mapping. */
 528        perf_event_update_userpage(event);
 529
 530out:
 531        perf_pmu_enable(event->pmu);
 532        return err;
 533}
 534
 535static void mipspmu_del(struct perf_event *event, int flags)
 536{
 537        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 538        struct hw_perf_event *hwc = &event->hw;
 539        int idx = hwc->idx;
 540
 541        WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
 542
 543        mipspmu_stop(event, PERF_EF_UPDATE);
 544        cpuc->events[idx] = NULL;
 545        clear_bit(idx, cpuc->used_mask);
 546
 547        perf_event_update_userpage(event);
 548}
 549
 550static void mipspmu_read(struct perf_event *event)
 551{
 552        struct hw_perf_event *hwc = &event->hw;
 553
 554        /* Don't read disabled counters! */
 555        if (hwc->idx < 0)
 556                return;
 557
 558        mipspmu_event_update(event, hwc, hwc->idx);
 559}
 560
 561static void mipspmu_enable(struct pmu *pmu)
 562{
 563#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
 564        write_unlock(&pmuint_rwlock);
 565#endif
 566        resume_local_counters();
 567}
 568
 569/*
 570 * MIPS performance counters can be per-TC. The control registers can
 571 * not be directly accessed across CPUs. Hence if we want to do global
 572 * control, we need cross CPU calls. on_each_cpu() can help us, but we
 573 * can not make sure this function is called with interrupts enabled. So
 574 * here we pause local counters and then grab a rwlock and leave the
 575 * counters on other CPUs alone. If any counter interrupt raises while
 576 * we own the write lock, simply pause local counters on that CPU and
 577 * spin in the handler. Also we know we won't be switched to another
 578 * CPU after pausing local counters and before grabbing the lock.
 579 */
 580static void mipspmu_disable(struct pmu *pmu)
 581{
 582        pause_local_counters();
 583#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
 584        write_lock(&pmuint_rwlock);
 585#endif
 586}
 587
 588static atomic_t active_events = ATOMIC_INIT(0);
 589static DEFINE_MUTEX(pmu_reserve_mutex);
 590static int (*save_perf_irq)(void);
 591
 592static int mipspmu_get_irq(void)
 593{
 594        int err;
 595
 596        if (mipspmu.irq >= 0) {
 597                /* Request my own irq handler. */
 598                err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
 599                                  IRQF_PERCPU | IRQF_NOBALANCING |
 600                                  IRQF_NO_THREAD | IRQF_NO_SUSPEND |
 601                                  IRQF_SHARED,
 602                                  "mips_perf_pmu", &mipspmu);
 603                if (err) {
 604                        pr_warn("Unable to request IRQ%d for MIPS performance counters!\n",
 605                                mipspmu.irq);
 606                }
 607        } else if (cp0_perfcount_irq < 0) {
 608                /*
 609                 * We are sharing the irq number with the timer interrupt.
 610                 */
 611                save_perf_irq = perf_irq;
 612                perf_irq = mipsxx_pmu_handle_shared_irq;
 613                err = 0;
 614        } else {
 615                pr_warn("The platform hasn't properly defined its interrupt controller\n");
 616                err = -ENOENT;
 617        }
 618
 619        return err;
 620}
 621
 622static void mipspmu_free_irq(void)
 623{
 624        if (mipspmu.irq >= 0)
 625                free_irq(mipspmu.irq, &mipspmu);
 626        else if (cp0_perfcount_irq < 0)
 627                perf_irq = save_perf_irq;
 628}
 629
 630/*
 631 * mipsxx/rm9000/loongson2 have different performance counters, they have
 632 * specific low-level init routines.
 633 */
 634static void reset_counters(void *arg);
 635static int __hw_perf_event_init(struct perf_event *event);
 636
 637static void hw_perf_event_destroy(struct perf_event *event)
 638{
 639        if (atomic_dec_and_mutex_lock(&active_events,
 640                                &pmu_reserve_mutex)) {
 641                /*
 642                 * We must not call the destroy function with interrupts
 643                 * disabled.
 644                 */
 645                on_each_cpu(reset_counters,
 646                        (void *)(long)mipspmu.num_counters, 1);
 647                mipspmu_free_irq();
 648                mutex_unlock(&pmu_reserve_mutex);
 649        }
 650}
 651
 652static int mipspmu_event_init(struct perf_event *event)
 653{
 654        int err = 0;
 655
 656        /* does not support taken branch sampling */
 657        if (has_branch_stack(event))
 658                return -EOPNOTSUPP;
 659
 660        switch (event->attr.type) {
 661        case PERF_TYPE_RAW:
 662        case PERF_TYPE_HARDWARE:
 663        case PERF_TYPE_HW_CACHE:
 664                break;
 665
 666        default:
 667                return -ENOENT;
 668        }
 669
 670        if (event->cpu >= 0 && !cpu_online(event->cpu))
 671                return -ENODEV;
 672
 673        if (!atomic_inc_not_zero(&active_events)) {
 674                mutex_lock(&pmu_reserve_mutex);
 675                if (atomic_read(&active_events) == 0)
 676                        err = mipspmu_get_irq();
 677
 678                if (!err)
 679                        atomic_inc(&active_events);
 680                mutex_unlock(&pmu_reserve_mutex);
 681        }
 682
 683        if (err)
 684                return err;
 685
 686        return __hw_perf_event_init(event);
 687}
 688
 689static struct pmu pmu = {
 690        .pmu_enable     = mipspmu_enable,
 691        .pmu_disable    = mipspmu_disable,
 692        .event_init     = mipspmu_event_init,
 693        .add            = mipspmu_add,
 694        .del            = mipspmu_del,
 695        .start          = mipspmu_start,
 696        .stop           = mipspmu_stop,
 697        .read           = mipspmu_read,
 698};
 699
 700static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
 701{
 702/*
 703 * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
 704 * event_id.
 705 */
 706#ifdef CONFIG_MIPS_MT_SMP
 707        if (num_possible_cpus() > 1)
 708                return ((unsigned int)pev->range << 24) |
 709                        (pev->cntr_mask & 0xffff00) |
 710                        (pev->event_id & 0xff);
 711        else
 712#endif /* CONFIG_MIPS_MT_SMP */
 713        {
 714                if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
 715                        return (pev->cntr_mask & 0xfffc00) |
 716                                (pev->event_id & 0x3ff);
 717                else
 718                        return (pev->cntr_mask & 0xffff00) |
 719                                (pev->event_id & 0xff);
 720        }
 721}
 722
 723static const struct mips_perf_event *mipspmu_map_general_event(int idx)
 724{
 725
 726        if ((*mipspmu.general_event_map)[idx].cntr_mask == 0)
 727                return ERR_PTR(-EOPNOTSUPP);
 728        return &(*mipspmu.general_event_map)[idx];
 729}
 730
 731static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
 732{
 733        unsigned int cache_type, cache_op, cache_result;
 734        const struct mips_perf_event *pev;
 735
 736        cache_type = (config >> 0) & 0xff;
 737        if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 738                return ERR_PTR(-EINVAL);
 739
 740        cache_op = (config >> 8) & 0xff;
 741        if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 742                return ERR_PTR(-EINVAL);
 743
 744        cache_result = (config >> 16) & 0xff;
 745        if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 746                return ERR_PTR(-EINVAL);
 747
 748        pev = &((*mipspmu.cache_event_map)
 749                                        [cache_type]
 750                                        [cache_op]
 751                                        [cache_result]);
 752
 753        if (pev->cntr_mask == 0)
 754                return ERR_PTR(-EOPNOTSUPP);
 755
 756        return pev;
 757
 758}
 759
 760static int validate_group(struct perf_event *event)
 761{
 762        struct perf_event *sibling, *leader = event->group_leader;
 763        struct cpu_hw_events fake_cpuc;
 764
 765        memset(&fake_cpuc, 0, sizeof(fake_cpuc));
 766
 767        if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0)
 768                return -EINVAL;
 769
 770        for_each_sibling_event(sibling, leader) {
 771                if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0)
 772                        return -EINVAL;
 773        }
 774
 775        if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0)
 776                return -EINVAL;
 777
 778        return 0;
 779}
 780
 781/* This is needed by specific irq handlers in perf_event_*.c */
 782static void handle_associated_event(struct cpu_hw_events *cpuc,
 783                                    int idx, struct perf_sample_data *data,
 784                                    struct pt_regs *regs)
 785{
 786        struct perf_event *event = cpuc->events[idx];
 787        struct hw_perf_event *hwc = &event->hw;
 788
 789        mipspmu_event_update(event, hwc, idx);
 790        data->period = event->hw.last_period;
 791        if (!mipspmu_event_set_period(event, hwc, idx))
 792                return;
 793
 794        if (perf_event_overflow(event, data, regs))
 795                mipsxx_pmu_disable_event(idx);
 796}
 797
 798
 799static int __n_counters(void)
 800{
 801        if (!cpu_has_perf)
 802                return 0;
 803        if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
 804                return 1;
 805        if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
 806                return 2;
 807        if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
 808                return 3;
 809
 810        return 4;
 811}
 812
 813static int n_counters(void)
 814{
 815        int counters;
 816
 817        switch (current_cpu_type()) {
 818        case CPU_R10000:
 819                counters = 2;
 820                break;
 821
 822        case CPU_R12000:
 823        case CPU_R14000:
 824        case CPU_R16000:
 825                counters = 4;
 826                break;
 827
 828        default:
 829                counters = __n_counters();
 830        }
 831
 832        return counters;
 833}
 834
 835static void loongson3_reset_counters(void *arg)
 836{
 837        int counters = (int)(long)arg;
 838
 839        switch (counters) {
 840        case 4:
 841                mipsxx_pmu_write_control(3, 0);
 842                mipspmu.write_counter(3, 0);
 843                mipsxx_pmu_write_control(3, 127<<5);
 844                mipspmu.write_counter(3, 0);
 845                mipsxx_pmu_write_control(3, 191<<5);
 846                mipspmu.write_counter(3, 0);
 847                mipsxx_pmu_write_control(3, 255<<5);
 848                mipspmu.write_counter(3, 0);
 849                mipsxx_pmu_write_control(3, 319<<5);
 850                mipspmu.write_counter(3, 0);
 851                mipsxx_pmu_write_control(3, 383<<5);
 852                mipspmu.write_counter(3, 0);
 853                mipsxx_pmu_write_control(3, 575<<5);
 854                mipspmu.write_counter(3, 0);
 855                fallthrough;
 856        case 3:
 857                mipsxx_pmu_write_control(2, 0);
 858                mipspmu.write_counter(2, 0);
 859                mipsxx_pmu_write_control(2, 127<<5);
 860                mipspmu.write_counter(2, 0);
 861                mipsxx_pmu_write_control(2, 191<<5);
 862                mipspmu.write_counter(2, 0);
 863                mipsxx_pmu_write_control(2, 255<<5);
 864                mipspmu.write_counter(2, 0);
 865                mipsxx_pmu_write_control(2, 319<<5);
 866                mipspmu.write_counter(2, 0);
 867                mipsxx_pmu_write_control(2, 383<<5);
 868                mipspmu.write_counter(2, 0);
 869                mipsxx_pmu_write_control(2, 575<<5);
 870                mipspmu.write_counter(2, 0);
 871                fallthrough;
 872        case 2:
 873                mipsxx_pmu_write_control(1, 0);
 874                mipspmu.write_counter(1, 0);
 875                mipsxx_pmu_write_control(1, 127<<5);
 876                mipspmu.write_counter(1, 0);
 877                mipsxx_pmu_write_control(1, 191<<5);
 878                mipspmu.write_counter(1, 0);
 879                mipsxx_pmu_write_control(1, 255<<5);
 880                mipspmu.write_counter(1, 0);
 881                mipsxx_pmu_write_control(1, 319<<5);
 882                mipspmu.write_counter(1, 0);
 883                mipsxx_pmu_write_control(1, 383<<5);
 884                mipspmu.write_counter(1, 0);
 885                mipsxx_pmu_write_control(1, 575<<5);
 886                mipspmu.write_counter(1, 0);
 887                fallthrough;
 888        case 1:
 889                mipsxx_pmu_write_control(0, 0);
 890                mipspmu.write_counter(0, 0);
 891                mipsxx_pmu_write_control(0, 127<<5);
 892                mipspmu.write_counter(0, 0);
 893                mipsxx_pmu_write_control(0, 191<<5);
 894                mipspmu.write_counter(0, 0);
 895                mipsxx_pmu_write_control(0, 255<<5);
 896                mipspmu.write_counter(0, 0);
 897                mipsxx_pmu_write_control(0, 319<<5);
 898                mipspmu.write_counter(0, 0);
 899                mipsxx_pmu_write_control(0, 383<<5);
 900                mipspmu.write_counter(0, 0);
 901                mipsxx_pmu_write_control(0, 575<<5);
 902                mipspmu.write_counter(0, 0);
 903                break;
 904        }
 905}
 906
 907static void reset_counters(void *arg)
 908{
 909        int counters = (int)(long)arg;
 910
 911        if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
 912                loongson3_reset_counters(arg);
 913                return;
 914        }
 915
 916        switch (counters) {
 917        case 4:
 918                mipsxx_pmu_write_control(3, 0);
 919                mipspmu.write_counter(3, 0);
 920                fallthrough;
 921        case 3:
 922                mipsxx_pmu_write_control(2, 0);
 923                mipspmu.write_counter(2, 0);
 924                fallthrough;
 925        case 2:
 926                mipsxx_pmu_write_control(1, 0);
 927                mipspmu.write_counter(1, 0);
 928                fallthrough;
 929        case 1:
 930                mipsxx_pmu_write_control(0, 0);
 931                mipspmu.write_counter(0, 0);
 932                break;
 933        }
 934}
 935
 936/* 24K/34K/1004K/interAptiv/loongson1 cores share the same event map. */
 937static const struct mips_perf_event mipsxxcore_event_map
 938                                [PERF_COUNT_HW_MAX] = {
 939        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
 940        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
 941        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T },
 942        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
 943};
 944
 945/* 74K/proAptiv core has different branch event code. */
 946static const struct mips_perf_event mipsxxcore_event_map2
 947                                [PERF_COUNT_HW_MAX] = {
 948        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
 949        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
 950        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T },
 951        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T },
 952};
 953
 954static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = {
 955        [PERF_COUNT_HW_CPU_CYCLES]          = { 0x00, CNTR_EVEN | CNTR_ODD },
 956        [PERF_COUNT_HW_INSTRUCTIONS]        = { 0x01, CNTR_EVEN | CNTR_ODD },
 957        /* These only count dcache, not icache */
 958        [PERF_COUNT_HW_CACHE_REFERENCES]    = { 0x45, CNTR_EVEN | CNTR_ODD },
 959        [PERF_COUNT_HW_CACHE_MISSES]        = { 0x48, CNTR_EVEN | CNTR_ODD },
 960        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x15, CNTR_EVEN | CNTR_ODD },
 961        [PERF_COUNT_HW_BRANCH_MISSES]       = { 0x16, CNTR_EVEN | CNTR_ODD },
 962};
 963
 964static const struct mips_perf_event loongson3_event_map1[PERF_COUNT_HW_MAX] = {
 965        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN },
 966        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD },
 967        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN },
 968        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD },
 969};
 970
 971static const struct mips_perf_event loongson3_event_map2[PERF_COUNT_HW_MAX] = {
 972        [PERF_COUNT_HW_CPU_CYCLES] = { 0x80, CNTR_ALL },
 973        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x81, CNTR_ALL },
 974        [PERF_COUNT_HW_CACHE_MISSES] = { 0x18, CNTR_ALL },
 975        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x94, CNTR_ALL },
 976        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x9c, CNTR_ALL },
 977};
 978
 979static const struct mips_perf_event loongson3_event_map3[PERF_COUNT_HW_MAX] = {
 980        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_ALL },
 981        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_ALL },
 982        [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x1c, CNTR_ALL },
 983        [PERF_COUNT_HW_CACHE_MISSES] = { 0x1d, CNTR_ALL },
 984        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_ALL },
 985        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x08, CNTR_ALL },
 986};
 987
 988static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
 989        [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
 990        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
 991        [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
 992        [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL  },
 993        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
 994        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
 995        [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
 996};
 997
 998static const struct mips_perf_event bmips5000_event_map
 999                                [PERF_COUNT_HW_MAX] = {
1000        [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, T },
1001        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
1002        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
1003};
1004
1005static const struct mips_perf_event xlp_event_map[PERF_COUNT_HW_MAX] = {
1006        [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
1007        [PERF_COUNT_HW_INSTRUCTIONS] = { 0x18, CNTR_ALL }, /* PAPI_TOT_INS */
1008        [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
1009        [PERF_COUNT_HW_CACHE_MISSES] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
1010        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x1b, CNTR_ALL }, /* PAPI_BR_CN */
1011        [PERF_COUNT_HW_BRANCH_MISSES] = { 0x1c, CNTR_ALL }, /* PAPI_BR_MSP */
1012};
1013
1014/* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */
1015static const struct mips_perf_event mipsxxcore_cache_map
1016                                [PERF_COUNT_HW_CACHE_MAX]
1017                                [PERF_COUNT_HW_CACHE_OP_MAX]
1018                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1019[C(L1D)] = {
1020        /*
1021         * Like some other architectures (e.g. ARM), the performance
1022         * counters don't differentiate between read and write
1023         * accesses/misses, so this isn't strictly correct, but it's the
1024         * best we can do. Writes and reads get combined.
1025         */
1026        [C(OP_READ)] = {
1027                [C(RESULT_ACCESS)]      = { 0x0a, CNTR_EVEN, T },
1028                [C(RESULT_MISS)]        = { 0x0b, CNTR_EVEN | CNTR_ODD, T },
1029        },
1030        [C(OP_WRITE)] = {
1031                [C(RESULT_ACCESS)]      = { 0x0a, CNTR_EVEN, T },
1032                [C(RESULT_MISS)]        = { 0x0b, CNTR_EVEN | CNTR_ODD, T },
1033        },
1034},
1035[C(L1I)] = {
1036        [C(OP_READ)] = {
1037                [C(RESULT_ACCESS)]      = { 0x09, CNTR_EVEN, T },
1038                [C(RESULT_MISS)]        = { 0x09, CNTR_ODD, T },
1039        },
1040        [C(OP_WRITE)] = {
1041                [C(RESULT_ACCESS)]      = { 0x09, CNTR_EVEN, T },
1042                [C(RESULT_MISS)]        = { 0x09, CNTR_ODD, T },
1043        },
1044        [C(OP_PREFETCH)] = {
1045                [C(RESULT_ACCESS)]      = { 0x14, CNTR_EVEN, T },
1046                /*
1047                 * Note that MIPS has only "hit" events countable for
1048                 * the prefetch operation.
1049                 */
1050        },
1051},
1052[C(LL)] = {
1053        [C(OP_READ)] = {
1054                [C(RESULT_ACCESS)]      = { 0x15, CNTR_ODD, P },
1055                [C(RESULT_MISS)]        = { 0x16, CNTR_EVEN, P },
1056        },
1057        [C(OP_WRITE)] = {
1058                [C(RESULT_ACCESS)]      = { 0x15, CNTR_ODD, P },
1059                [C(RESULT_MISS)]        = { 0x16, CNTR_EVEN, P },
1060        },
1061},
1062[C(DTLB)] = {
1063        [C(OP_READ)] = {
1064                [C(RESULT_ACCESS)]      = { 0x06, CNTR_EVEN, T },
1065                [C(RESULT_MISS)]        = { 0x06, CNTR_ODD, T },
1066        },
1067        [C(OP_WRITE)] = {
1068                [C(RESULT_ACCESS)]      = { 0x06, CNTR_EVEN, T },
1069                [C(RESULT_MISS)]        = { 0x06, CNTR_ODD, T },
1070        },
1071},
1072[C(ITLB)] = {
1073        [C(OP_READ)] = {
1074                [C(RESULT_ACCESS)]      = { 0x05, CNTR_EVEN, T },
1075                [C(RESULT_MISS)]        = { 0x05, CNTR_ODD, T },
1076        },
1077        [C(OP_WRITE)] = {
1078                [C(RESULT_ACCESS)]      = { 0x05, CNTR_EVEN, T },
1079                [C(RESULT_MISS)]        = { 0x05, CNTR_ODD, T },
1080        },
1081},
1082[C(BPU)] = {
1083        /* Using the same code for *HW_BRANCH* */
1084        [C(OP_READ)] = {
1085                [C(RESULT_ACCESS)]      = { 0x02, CNTR_EVEN, T },
1086                [C(RESULT_MISS)]        = { 0x02, CNTR_ODD, T },
1087        },
1088        [C(OP_WRITE)] = {
1089                [C(RESULT_ACCESS)]      = { 0x02, CNTR_EVEN, T },
1090                [C(RESULT_MISS)]        = { 0x02, CNTR_ODD, T },
1091        },
1092},
1093};
1094
1095/* 74K/proAptiv core has completely different cache event map. */
1096static const struct mips_perf_event mipsxxcore_cache_map2
1097                                [PERF_COUNT_HW_CACHE_MAX]
1098                                [PERF_COUNT_HW_CACHE_OP_MAX]
1099                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1100[C(L1D)] = {
1101        /*
1102         * Like some other architectures (e.g. ARM), the performance
1103         * counters don't differentiate between read and write
1104         * accesses/misses, so this isn't strictly correct, but it's the
1105         * best we can do. Writes and reads get combined.
1106         */
1107        [C(OP_READ)] = {
1108                [C(RESULT_ACCESS)]      = { 0x17, CNTR_ODD, T },
1109                [C(RESULT_MISS)]        = { 0x18, CNTR_ODD, T },
1110        },
1111        [C(OP_WRITE)] = {
1112                [C(RESULT_ACCESS)]      = { 0x17, CNTR_ODD, T },
1113                [C(RESULT_MISS)]        = { 0x18, CNTR_ODD, T },
1114        },
1115},
1116[C(L1I)] = {
1117        [C(OP_READ)] = {
1118                [C(RESULT_ACCESS)]      = { 0x06, CNTR_EVEN, T },
1119                [C(RESULT_MISS)]        = { 0x06, CNTR_ODD, T },
1120        },
1121        [C(OP_WRITE)] = {
1122                [C(RESULT_ACCESS)]      = { 0x06, CNTR_EVEN, T },
1123                [C(RESULT_MISS)]        = { 0x06, CNTR_ODD, T },
1124        },
1125        [C(OP_PREFETCH)] = {
1126                [C(RESULT_ACCESS)]      = { 0x34, CNTR_EVEN, T },
1127                /*
1128                 * Note that MIPS has only "hit" events countable for
1129                 * the prefetch operation.
1130                 */
1131        },
1132},
1133[C(LL)] = {
1134        [C(OP_READ)] = {
1135                [C(RESULT_ACCESS)]      = { 0x1c, CNTR_ODD, P },
1136                [C(RESULT_MISS)]        = { 0x1d, CNTR_EVEN, P },
1137        },
1138        [C(OP_WRITE)] = {
1139                [C(RESULT_ACCESS)]      = { 0x1c, CNTR_ODD, P },
1140                [C(RESULT_MISS)]        = { 0x1d, CNTR_EVEN, P },
1141        },
1142},
1143/*
1144 * 74K core does not have specific DTLB events. proAptiv core has
1145 * "speculative" DTLB events which are numbered 0x63 (even/odd) and
1146 * not included here. One can use raw events if really needed.
1147 */
1148[C(ITLB)] = {
1149        [C(OP_READ)] = {
1150                [C(RESULT_ACCESS)]      = { 0x04, CNTR_EVEN, T },
1151                [C(RESULT_MISS)]        = { 0x04, CNTR_ODD, T },
1152        },
1153        [C(OP_WRITE)] = {
1154                [C(RESULT_ACCESS)]      = { 0x04, CNTR_EVEN, T },
1155                [C(RESULT_MISS)]        = { 0x04, CNTR_ODD, T },
1156        },
1157},
1158[C(BPU)] = {
1159        /* Using the same code for *HW_BRANCH* */
1160        [C(OP_READ)] = {
1161                [C(RESULT_ACCESS)]      = { 0x27, CNTR_EVEN, T },
1162                [C(RESULT_MISS)]        = { 0x27, CNTR_ODD, T },
1163        },
1164        [C(OP_WRITE)] = {
1165                [C(RESULT_ACCESS)]      = { 0x27, CNTR_EVEN, T },
1166                [C(RESULT_MISS)]        = { 0x27, CNTR_ODD, T },
1167        },
1168},
1169};
1170
1171static const struct mips_perf_event i6x00_cache_map
1172                                [PERF_COUNT_HW_CACHE_MAX]
1173                                [PERF_COUNT_HW_CACHE_OP_MAX]
1174                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1175[C(L1D)] = {
1176        [C(OP_READ)] = {
1177                [C(RESULT_ACCESS)]      = { 0x46, CNTR_EVEN | CNTR_ODD },
1178                [C(RESULT_MISS)]        = { 0x49, CNTR_EVEN | CNTR_ODD },
1179        },
1180        [C(OP_WRITE)] = {
1181                [C(RESULT_ACCESS)]      = { 0x47, CNTR_EVEN | CNTR_ODD },
1182                [C(RESULT_MISS)]        = { 0x4a, CNTR_EVEN | CNTR_ODD },
1183        },
1184},
1185[C(L1I)] = {
1186        [C(OP_READ)] = {
1187                [C(RESULT_ACCESS)]      = { 0x84, CNTR_EVEN | CNTR_ODD },
1188                [C(RESULT_MISS)]        = { 0x85, CNTR_EVEN | CNTR_ODD },
1189        },
1190},
1191[C(DTLB)] = {
1192        /* Can't distinguish read & write */
1193        [C(OP_READ)] = {
1194                [C(RESULT_ACCESS)]      = { 0x40, CNTR_EVEN | CNTR_ODD },
1195                [C(RESULT_MISS)]        = { 0x41, CNTR_EVEN | CNTR_ODD },
1196        },
1197        [C(OP_WRITE)] = {
1198                [C(RESULT_ACCESS)]      = { 0x40, CNTR_EVEN | CNTR_ODD },
1199                [C(RESULT_MISS)]        = { 0x41, CNTR_EVEN | CNTR_ODD },
1200        },
1201},
1202[C(BPU)] = {
1203        /* Conditional branches / mispredicted */
1204        [C(OP_READ)] = {
1205                [C(RESULT_ACCESS)]      = { 0x15, CNTR_EVEN | CNTR_ODD },
1206                [C(RESULT_MISS)]        = { 0x16, CNTR_EVEN | CNTR_ODD },
1207        },
1208},
1209};
1210
1211static const struct mips_perf_event loongson3_cache_map1
1212                                [PERF_COUNT_HW_CACHE_MAX]
1213                                [PERF_COUNT_HW_CACHE_OP_MAX]
1214                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1215[C(L1D)] = {
1216        /*
1217         * Like some other architectures (e.g. ARM), the performance
1218         * counters don't differentiate between read and write
1219         * accesses/misses, so this isn't strictly correct, but it's the
1220         * best we can do. Writes and reads get combined.
1221         */
1222        [C(OP_READ)] = {
1223                [C(RESULT_MISS)]        = { 0x04, CNTR_ODD },
1224        },
1225        [C(OP_WRITE)] = {
1226                [C(RESULT_MISS)]        = { 0x04, CNTR_ODD },
1227        },
1228},
1229[C(L1I)] = {
1230        [C(OP_READ)] = {
1231                [C(RESULT_MISS)]        = { 0x04, CNTR_EVEN },
1232        },
1233        [C(OP_WRITE)] = {
1234                [C(RESULT_MISS)]        = { 0x04, CNTR_EVEN },
1235        },
1236},
1237[C(DTLB)] = {
1238        [C(OP_READ)] = {
1239                [C(RESULT_MISS)]        = { 0x09, CNTR_ODD },
1240        },
1241        [C(OP_WRITE)] = {
1242                [C(RESULT_MISS)]        = { 0x09, CNTR_ODD },
1243        },
1244},
1245[C(ITLB)] = {
1246        [C(OP_READ)] = {
1247                [C(RESULT_MISS)]        = { 0x0c, CNTR_ODD },
1248        },
1249        [C(OP_WRITE)] = {
1250                [C(RESULT_MISS)]        = { 0x0c, CNTR_ODD },
1251        },
1252},
1253[C(BPU)] = {
1254        /* Using the same code for *HW_BRANCH* */
1255        [C(OP_READ)] = {
1256                [C(RESULT_ACCESS)]      = { 0x01, CNTR_EVEN },
1257                [C(RESULT_MISS)]        = { 0x01, CNTR_ODD },
1258        },
1259        [C(OP_WRITE)] = {
1260                [C(RESULT_ACCESS)]      = { 0x01, CNTR_EVEN },
1261                [C(RESULT_MISS)]        = { 0x01, CNTR_ODD },
1262        },
1263},
1264};
1265
1266static const struct mips_perf_event loongson3_cache_map2
1267                                [PERF_COUNT_HW_CACHE_MAX]
1268                                [PERF_COUNT_HW_CACHE_OP_MAX]
1269                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1270[C(L1D)] = {
1271        /*
1272         * Like some other architectures (e.g. ARM), the performance
1273         * counters don't differentiate between read and write
1274         * accesses/misses, so this isn't strictly correct, but it's the
1275         * best we can do. Writes and reads get combined.
1276         */
1277        [C(OP_READ)] = {
1278                [C(RESULT_ACCESS)]      = { 0x156, CNTR_ALL },
1279        },
1280        [C(OP_WRITE)] = {
1281                [C(RESULT_ACCESS)]      = { 0x155, CNTR_ALL },
1282                [C(RESULT_MISS)]        = { 0x153, CNTR_ALL },
1283        },
1284},
1285[C(L1I)] = {
1286        [C(OP_READ)] = {
1287                [C(RESULT_MISS)]        = { 0x18, CNTR_ALL },
1288        },
1289        [C(OP_WRITE)] = {
1290                [C(RESULT_MISS)]        = { 0x18, CNTR_ALL },
1291        },
1292},
1293[C(LL)] = {
1294        [C(OP_READ)] = {
1295                [C(RESULT_ACCESS)]      = { 0x1b6, CNTR_ALL },
1296        },
1297        [C(OP_WRITE)] = {
1298                [C(RESULT_ACCESS)]      = { 0x1b7, CNTR_ALL },
1299        },
1300        [C(OP_PREFETCH)] = {
1301                [C(RESULT_ACCESS)]      = { 0x1bf, CNTR_ALL },
1302        },
1303},
1304[C(DTLB)] = {
1305        [C(OP_READ)] = {
1306                [C(RESULT_MISS)]        = { 0x92, CNTR_ALL },
1307        },
1308        [C(OP_WRITE)] = {
1309                [C(RESULT_MISS)]        = { 0x92, CNTR_ALL },
1310        },
1311},
1312[C(ITLB)] = {
1313        [C(OP_READ)] = {
1314                [C(RESULT_MISS)]        = { 0x1a, CNTR_ALL },
1315        },
1316        [C(OP_WRITE)] = {
1317                [C(RESULT_MISS)]        = { 0x1a, CNTR_ALL },
1318        },
1319},
1320[C(BPU)] = {
1321        /* Using the same code for *HW_BRANCH* */
1322        [C(OP_READ)] = {
1323                [C(RESULT_ACCESS)]      = { 0x94, CNTR_ALL },
1324                [C(RESULT_MISS)]        = { 0x9c, CNTR_ALL },
1325        },
1326},
1327};
1328
1329static const struct mips_perf_event loongson3_cache_map3
1330                                [PERF_COUNT_HW_CACHE_MAX]
1331                                [PERF_COUNT_HW_CACHE_OP_MAX]
1332                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1333[C(L1D)] = {
1334        /*
1335         * Like some other architectures (e.g. ARM), the performance
1336         * counters don't differentiate between read and write
1337         * accesses/misses, so this isn't strictly correct, but it's the
1338         * best we can do. Writes and reads get combined.
1339         */
1340        [C(OP_READ)] = {
1341                [C(RESULT_ACCESS)]      = { 0x1e, CNTR_ALL },
1342                [C(RESULT_MISS)]        = { 0x1f, CNTR_ALL },
1343        },
1344        [C(OP_PREFETCH)] = {
1345                [C(RESULT_ACCESS)]      = { 0xaa, CNTR_ALL },
1346                [C(RESULT_MISS)]        = { 0xa9, CNTR_ALL },
1347        },
1348},
1349[C(L1I)] = {
1350        [C(OP_READ)] = {
1351                [C(RESULT_ACCESS)]      = { 0x1c, CNTR_ALL },
1352                [C(RESULT_MISS)]        = { 0x1d, CNTR_ALL },
1353        },
1354},
1355[C(LL)] = {
1356        [C(OP_READ)] = {
1357                [C(RESULT_ACCESS)]      = { 0x2e, CNTR_ALL },
1358                [C(RESULT_MISS)]        = { 0x2f, CNTR_ALL },
1359        },
1360},
1361[C(DTLB)] = {
1362        [C(OP_READ)] = {
1363                [C(RESULT_ACCESS)]      = { 0x14, CNTR_ALL },
1364                [C(RESULT_MISS)]        = { 0x1b, CNTR_ALL },
1365        },
1366},
1367[C(ITLB)] = {
1368        [C(OP_READ)] = {
1369                [C(RESULT_MISS)]        = { 0x1a, CNTR_ALL },
1370        },
1371},
1372[C(BPU)] = {
1373        /* Using the same code for *HW_BRANCH* */
1374        [C(OP_READ)] = {
1375                [C(RESULT_ACCESS)]      = { 0x02, CNTR_ALL },
1376                [C(RESULT_MISS)]        = { 0x08, CNTR_ALL },
1377        },
1378},
1379};
1380
1381/* BMIPS5000 */
1382static const struct mips_perf_event bmips5000_cache_map
1383                                [PERF_COUNT_HW_CACHE_MAX]
1384                                [PERF_COUNT_HW_CACHE_OP_MAX]
1385                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1386[C(L1D)] = {
1387        /*
1388         * Like some other architectures (e.g. ARM), the performance
1389         * counters don't differentiate between read and write
1390         * accesses/misses, so this isn't strictly correct, but it's the
1391         * best we can do. Writes and reads get combined.
1392         */
1393        [C(OP_READ)] = {
1394                [C(RESULT_ACCESS)]      = { 12, CNTR_EVEN, T },
1395                [C(RESULT_MISS)]        = { 12, CNTR_ODD, T },
1396        },
1397        [C(OP_WRITE)] = {
1398                [C(RESULT_ACCESS)]      = { 12, CNTR_EVEN, T },
1399                [C(RESULT_MISS)]        = { 12, CNTR_ODD, T },
1400        },
1401},
1402[C(L1I)] = {
1403        [C(OP_READ)] = {
1404                [C(RESULT_ACCESS)]      = { 10, CNTR_EVEN, T },
1405                [C(RESULT_MISS)]        = { 10, CNTR_ODD, T },
1406        },
1407        [C(OP_WRITE)] = {
1408                [C(RESULT_ACCESS)]      = { 10, CNTR_EVEN, T },
1409                [C(RESULT_MISS)]        = { 10, CNTR_ODD, T },
1410        },
1411        [C(OP_PREFETCH)] = {
1412                [C(RESULT_ACCESS)]      = { 23, CNTR_EVEN, T },
1413                /*
1414                 * Note that MIPS has only "hit" events countable for
1415                 * the prefetch operation.
1416                 */
1417        },
1418},
1419[C(LL)] = {
1420        [C(OP_READ)] = {
1421                [C(RESULT_ACCESS)]      = { 28, CNTR_EVEN, P },
1422                [C(RESULT_MISS)]        = { 28, CNTR_ODD, P },
1423        },
1424        [C(OP_WRITE)] = {
1425                [C(RESULT_ACCESS)]      = { 28, CNTR_EVEN, P },
1426                [C(RESULT_MISS)]        = { 28, CNTR_ODD, P },
1427        },
1428},
1429[C(BPU)] = {
1430        /* Using the same code for *HW_BRANCH* */
1431        [C(OP_READ)] = {
1432                [C(RESULT_MISS)]        = { 0x02, CNTR_ODD, T },
1433        },
1434        [C(OP_WRITE)] = {
1435                [C(RESULT_MISS)]        = { 0x02, CNTR_ODD, T },
1436        },
1437},
1438};
1439
1440static const struct mips_perf_event octeon_cache_map
1441                                [PERF_COUNT_HW_CACHE_MAX]
1442                                [PERF_COUNT_HW_CACHE_OP_MAX]
1443                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1444[C(L1D)] = {
1445        [C(OP_READ)] = {
1446                [C(RESULT_ACCESS)]      = { 0x2b, CNTR_ALL },
1447                [C(RESULT_MISS)]        = { 0x2e, CNTR_ALL },
1448        },
1449        [C(OP_WRITE)] = {
1450                [C(RESULT_ACCESS)]      = { 0x30, CNTR_ALL },
1451        },
1452},
1453[C(L1I)] = {
1454        [C(OP_READ)] = {
1455                [C(RESULT_ACCESS)]      = { 0x18, CNTR_ALL },
1456        },
1457        [C(OP_PREFETCH)] = {
1458                [C(RESULT_ACCESS)]      = { 0x19, CNTR_ALL },
1459        },
1460},
1461[C(DTLB)] = {
1462        /*
1463         * Only general DTLB misses are counted use the same event for
1464         * read and write.
1465         */
1466        [C(OP_READ)] = {
1467                [C(RESULT_MISS)]        = { 0x35, CNTR_ALL },
1468        },
1469        [C(OP_WRITE)] = {
1470                [C(RESULT_MISS)]        = { 0x35, CNTR_ALL },
1471        },
1472},
1473[C(ITLB)] = {
1474        [C(OP_READ)] = {
1475                [C(RESULT_MISS)]        = { 0x37, CNTR_ALL },
1476        },
1477},
1478};
1479
1480static const struct mips_perf_event xlp_cache_map
1481                                [PERF_COUNT_HW_CACHE_MAX]
1482                                [PERF_COUNT_HW_CACHE_OP_MAX]
1483                                [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1484[C(L1D)] = {
1485        [C(OP_READ)] = {
1486                [C(RESULT_ACCESS)]      = { 0x31, CNTR_ALL }, /* PAPI_L1_DCR */
1487                [C(RESULT_MISS)]        = { 0x30, CNTR_ALL }, /* PAPI_L1_LDM */
1488        },
1489        [C(OP_WRITE)] = {
1490                [C(RESULT_ACCESS)]      = { 0x2f, CNTR_ALL }, /* PAPI_L1_DCW */
1491                [C(RESULT_MISS)]        = { 0x2e, CNTR_ALL }, /* PAPI_L1_STM */
1492        },
1493},
1494[C(L1I)] = {
1495        [C(OP_READ)] = {
1496                [C(RESULT_ACCESS)]      = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */
1497                [C(RESULT_MISS)]        = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */
1498        },
1499},
1500[C(LL)] = {
1501        [C(OP_READ)] = {
1502                [C(RESULT_ACCESS)]      = { 0x35, CNTR_ALL }, /* PAPI_L2_DCR */
1503                [C(RESULT_MISS)]        = { 0x37, CNTR_ALL }, /* PAPI_L2_LDM */
1504        },
1505        [C(OP_WRITE)] = {
1506                [C(RESULT_ACCESS)]      = { 0x34, CNTR_ALL }, /* PAPI_L2_DCA */
1507                [C(RESULT_MISS)]        = { 0x36, CNTR_ALL }, /* PAPI_L2_DCM */
1508        },
1509},
1510[C(DTLB)] = {
1511        /*
1512         * Only general DTLB misses are counted use the same event for
1513         * read and write.
1514         */
1515        [C(OP_READ)] = {
1516                [C(RESULT_MISS)]        = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
1517        },
1518        [C(OP_WRITE)] = {
1519                [C(RESULT_MISS)]        = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */
1520        },
1521},
1522[C(ITLB)] = {
1523        [C(OP_READ)] = {
1524                [C(RESULT_MISS)]        = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
1525        },
1526        [C(OP_WRITE)] = {
1527                [C(RESULT_MISS)]        = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */
1528        },
1529},
1530[C(BPU)] = {
1531        [C(OP_READ)] = {
1532                [C(RESULT_MISS)]        = { 0x25, CNTR_ALL },
1533        },
1534},
1535};
1536
1537static int __hw_perf_event_init(struct perf_event *event)
1538{
1539        struct perf_event_attr *attr = &event->attr;
1540        struct hw_perf_event *hwc = &event->hw;
1541        const struct mips_perf_event *pev;
1542        int err;
1543
1544        /* Returning MIPS event descriptor for generic perf event. */
1545        if (PERF_TYPE_HARDWARE == event->attr.type) {
1546                if (event->attr.config >= PERF_COUNT_HW_MAX)
1547                        return -EINVAL;
1548                pev = mipspmu_map_general_event(event->attr.config);
1549        } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
1550                pev = mipspmu_map_cache_event(event->attr.config);
1551        } else if (PERF_TYPE_RAW == event->attr.type) {
1552                /* We are working on the global raw event. */
1553                mutex_lock(&raw_event_mutex);
1554                pev = mipspmu.map_raw_event(event->attr.config);
1555        } else {
1556                /* The event type is not (yet) supported. */
1557                return -EOPNOTSUPP;
1558        }
1559
1560        if (IS_ERR(pev)) {
1561                if (PERF_TYPE_RAW == event->attr.type)
1562                        mutex_unlock(&raw_event_mutex);
1563                return PTR_ERR(pev);
1564        }
1565
1566        /*
1567         * We allow max flexibility on how each individual counter shared
1568         * by the single CPU operates (the mode exclusion and the range).
1569         */
1570        hwc->config_base = MIPS_PERFCTRL_IE;
1571
1572        hwc->event_base = mipspmu_perf_event_encode(pev);
1573        if (PERF_TYPE_RAW == event->attr.type)
1574                mutex_unlock(&raw_event_mutex);
1575
1576        if (!attr->exclude_user)
1577                hwc->config_base |= MIPS_PERFCTRL_U;
1578        if (!attr->exclude_kernel) {
1579                hwc->config_base |= MIPS_PERFCTRL_K;
1580                /* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */
1581                hwc->config_base |= MIPS_PERFCTRL_EXL;
1582        }
1583        if (!attr->exclude_hv)
1584                hwc->config_base |= MIPS_PERFCTRL_S;
1585
1586        hwc->config_base &= M_PERFCTL_CONFIG_MASK;
1587        /*
1588         * The event can belong to another cpu. We do not assign a local
1589         * counter for it for now.
1590         */
1591        hwc->idx = -1;
1592        hwc->config = 0;
1593
1594        if (!hwc->sample_period) {
1595                hwc->sample_period  = mipspmu.max_period;
1596                hwc->last_period    = hwc->sample_period;
1597                local64_set(&hwc->period_left, hwc->sample_period);
1598        }
1599
1600        err = 0;
1601        if (event->group_leader != event)
1602                err = validate_group(event);
1603
1604        event->destroy = hw_perf_event_destroy;
1605
1606        if (err)
1607                event->destroy(event);
1608
1609        return err;
1610}
1611
1612static void pause_local_counters(void)
1613{
1614        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1615        int ctr = mipspmu.num_counters;
1616        unsigned long flags;
1617
1618        local_irq_save(flags);
1619        do {
1620                ctr--;
1621                cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
1622                mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
1623                                         ~M_PERFCTL_COUNT_EVENT_WHENEVER);
1624        } while (ctr > 0);
1625        local_irq_restore(flags);
1626}
1627
1628static void resume_local_counters(void)
1629{
1630        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1631        int ctr = mipspmu.num_counters;
1632
1633        do {
1634                ctr--;
1635                mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
1636        } while (ctr > 0);
1637}
1638
1639static int mipsxx_pmu_handle_shared_irq(void)
1640{
1641        struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1642        struct perf_sample_data data;
1643        unsigned int counters = mipspmu.num_counters;
1644        u64 counter;
1645        int n, handled = IRQ_NONE;
1646        struct pt_regs *regs;
1647
1648        if (cpu_has_perf_cntr_intr_bit && !(read_c0_cause() & CAUSEF_PCI))
1649                return handled;
1650        /*
1651         * First we pause the local counters, so that when we are locked
1652         * here, the counters are all paused. When it gets locked due to
1653         * perf_disable(), the timer interrupt handler will be delayed.
1654         *
1655         * See also mipsxx_pmu_start().
1656         */
1657        pause_local_counters();
1658#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1659        read_lock(&pmuint_rwlock);
1660#endif
1661
1662        regs = get_irq_regs();
1663
1664        perf_sample_data_init(&data, 0, 0);
1665
1666        for (n = counters - 1; n >= 0; n--) {
1667                if (!test_bit(n, cpuc->used_mask))
1668                        continue;
1669
1670                counter = mipspmu.read_counter(n);
1671                if (!(counter & mipspmu.overflow))
1672                        continue;
1673
1674                handle_associated_event(cpuc, n, &data, regs);
1675                handled = IRQ_HANDLED;
1676        }
1677
1678#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1679        read_unlock(&pmuint_rwlock);
1680#endif
1681        resume_local_counters();
1682
1683        /*
1684         * Do all the work for the pending perf events. We can do this
1685         * in here because the performance counter interrupt is a regular
1686         * interrupt, not NMI.
1687         */
1688        if (handled == IRQ_HANDLED)
1689                irq_work_run();
1690
1691        return handled;
1692}
1693
1694static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
1695{
1696        return mipsxx_pmu_handle_shared_irq();
1697}
1698
1699/* 24K */
1700#define IS_BOTH_COUNTERS_24K_EVENT(b)                                   \
1701        ((b) == 0 || (b) == 1 || (b) == 11)
1702
1703/* 34K */
1704#define IS_BOTH_COUNTERS_34K_EVENT(b)                                   \
1705        ((b) == 0 || (b) == 1 || (b) == 11)
1706#ifdef CONFIG_MIPS_MT_SMP
1707#define IS_RANGE_P_34K_EVENT(r, b)                                      \
1708        ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||             \
1709         (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 ||           \
1710         (r) == 176 || ((b) >= 50 && (b) <= 55) ||                      \
1711         ((b) >= 64 && (b) <= 67))
1712#define IS_RANGE_V_34K_EVENT(r) ((r) == 47)
1713#endif
1714
1715/* 74K */
1716#define IS_BOTH_COUNTERS_74K_EVENT(b)                                   \
1717        ((b) == 0 || (b) == 1)
1718
1719/* proAptiv */
1720#define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b)                              \
1721        ((b) == 0 || (b) == 1)
1722/* P5600 */
1723#define IS_BOTH_COUNTERS_P5600_EVENT(b)                                 \
1724        ((b) == 0 || (b) == 1)
1725
1726/* 1004K */
1727#define IS_BOTH_COUNTERS_1004K_EVENT(b)                                 \
1728        ((b) == 0 || (b) == 1 || (b) == 11)
1729#ifdef CONFIG_MIPS_MT_SMP
1730#define IS_RANGE_P_1004K_EVENT(r, b)                                    \
1731        ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||             \
1732         (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 ||            \
1733         (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) ||        \
1734         (r) == 188 || (b) == 61 || (b) == 62 ||                        \
1735         ((b) >= 64 && (b) <= 67))
1736#define IS_RANGE_V_1004K_EVENT(r)       ((r) == 47)
1737#endif
1738
1739/* interAptiv */
1740#define IS_BOTH_COUNTERS_INTERAPTIV_EVENT(b)                            \
1741        ((b) == 0 || (b) == 1 || (b) == 11)
1742#ifdef CONFIG_MIPS_MT_SMP
1743/* The P/V/T info is not provided for "(b) == 38" in SUM, assume P. */
1744#define IS_RANGE_P_INTERAPTIV_EVENT(r, b)                               \
1745        ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 ||             \
1746         (b) == 25 || (b) == 36 || (b) == 38 || (b) == 39 ||            \
1747         (r) == 44 || (r) == 174 || (r) == 176 || ((b) >= 50 &&         \
1748         (b) <= 59) || (r) == 188 || (b) == 61 || (b) == 62 ||          \
1749         ((b) >= 64 && (b) <= 67))
1750#define IS_RANGE_V_INTERAPTIV_EVENT(r)  ((r) == 47 || (r) == 175)
1751#endif
1752
1753/* BMIPS5000 */
1754#define IS_BOTH_COUNTERS_BMIPS5000_EVENT(b)                             \
1755        ((b) == 0 || (b) == 1)
1756
1757
1758/*
1759 * For most cores the user can use 0-255 raw events, where 0-127 for the events
1760 * of even counters, and 128-255 for odd counters. Note that bit 7 is used to
1761 * indicate the even/odd bank selector. So, for example, when user wants to take
1762 * the Event Num of 15 for odd counters (by referring to the user manual), then
1763 * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F)
1764 * to be used.
1765 *
1766 * Some newer cores have even more events, in which case the user can use raw
1767 * events 0-511, where 0-255 are for the events of even counters, and 256-511
1768 * are for odd counters, so bit 8 is used to indicate the even/odd bank selector.
1769 */
1770static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
1771{
1772        /* currently most cores have 7-bit event numbers */
1773        int pmu_type;
1774        unsigned int raw_id = config & 0xff;
1775        unsigned int base_id = raw_id & 0x7f;
1776
1777        switch (current_cpu_type()) {
1778        case CPU_24K:
1779                if (IS_BOTH_COUNTERS_24K_EVENT(base_id))
1780                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1781                else
1782                        raw_event.cntr_mask =
1783                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1784#ifdef CONFIG_MIPS_MT_SMP
1785                /*
1786                 * This is actually doing nothing. Non-multithreading
1787                 * CPUs will not check and calculate the range.
1788                 */
1789                raw_event.range = P;
1790#endif
1791                break;
1792        case CPU_34K:
1793                if (IS_BOTH_COUNTERS_34K_EVENT(base_id))
1794                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1795                else
1796                        raw_event.cntr_mask =
1797                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1798#ifdef CONFIG_MIPS_MT_SMP
1799                if (IS_RANGE_P_34K_EVENT(raw_id, base_id))
1800                        raw_event.range = P;
1801                else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id)))
1802                        raw_event.range = V;
1803                else
1804                        raw_event.range = T;
1805#endif
1806                break;
1807        case CPU_74K:
1808        case CPU_1074K:
1809                if (IS_BOTH_COUNTERS_74K_EVENT(base_id))
1810                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1811                else
1812                        raw_event.cntr_mask =
1813                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1814#ifdef CONFIG_MIPS_MT_SMP
1815                raw_event.range = P;
1816#endif
1817                break;
1818        case CPU_PROAPTIV:
1819                if (IS_BOTH_COUNTERS_PROAPTIV_EVENT(base_id))
1820                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1821                else
1822                        raw_event.cntr_mask =
1823                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1824#ifdef CONFIG_MIPS_MT_SMP
1825                raw_event.range = P;
1826#endif
1827                break;
1828        case CPU_P5600:
1829        case CPU_P6600:
1830                /* 8-bit event numbers */
1831                raw_id = config & 0x1ff;
1832                base_id = raw_id & 0xff;
1833                if (IS_BOTH_COUNTERS_P5600_EVENT(base_id))
1834                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1835                else
1836                        raw_event.cntr_mask =
1837                                raw_id > 255 ? CNTR_ODD : CNTR_EVEN;
1838#ifdef CONFIG_MIPS_MT_SMP
1839                raw_event.range = P;
1840#endif
1841                break;
1842        case CPU_I6400:
1843        case CPU_I6500:
1844                /* 8-bit event numbers */
1845                base_id = config & 0xff;
1846                raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1847                break;
1848        case CPU_1004K:
1849                if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
1850                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1851                else
1852                        raw_event.cntr_mask =
1853                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1854#ifdef CONFIG_MIPS_MT_SMP
1855                if (IS_RANGE_P_1004K_EVENT(raw_id, base_id))
1856                        raw_event.range = P;
1857                else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id)))
1858                        raw_event.range = V;
1859                else
1860                        raw_event.range = T;
1861#endif
1862                break;
1863        case CPU_INTERAPTIV:
1864                if (IS_BOTH_COUNTERS_INTERAPTIV_EVENT(base_id))
1865                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1866                else
1867                        raw_event.cntr_mask =
1868                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1869#ifdef CONFIG_MIPS_MT_SMP
1870                if (IS_RANGE_P_INTERAPTIV_EVENT(raw_id, base_id))
1871                        raw_event.range = P;
1872                else if (unlikely(IS_RANGE_V_INTERAPTIV_EVENT(raw_id)))
1873                        raw_event.range = V;
1874                else
1875                        raw_event.range = T;
1876#endif
1877                break;
1878        case CPU_BMIPS5000:
1879                if (IS_BOTH_COUNTERS_BMIPS5000_EVENT(base_id))
1880                        raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1881                else
1882                        raw_event.cntr_mask =
1883                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1884                break;
1885        case CPU_LOONGSON64:
1886                pmu_type = get_loongson3_pmu_type();
1887
1888                switch (pmu_type) {
1889                case LOONGSON_PMU_TYPE1:
1890                        raw_event.cntr_mask =
1891                                raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1892                        break;
1893                case LOONGSON_PMU_TYPE2:
1894                        base_id = config & 0x3ff;
1895                        raw_event.cntr_mask = CNTR_ALL;
1896
1897                        if ((base_id >= 1 && base_id < 28) ||
1898                                (base_id >= 64 && base_id < 90) ||
1899                                (base_id >= 128 && base_id < 164) ||
1900                                (base_id >= 192 && base_id < 200) ||
1901                                (base_id >= 256 && base_id < 275) ||
1902                                (base_id >= 320 && base_id < 361) ||
1903                                (base_id >= 384 && base_id < 574))
1904                                break;
1905
1906                        return ERR_PTR(-EOPNOTSUPP);
1907                case LOONGSON_PMU_TYPE3:
1908                        base_id = raw_id;
1909                        raw_event.cntr_mask = CNTR_ALL;
1910                        break;
1911                }
1912                break;
1913        }
1914
1915        raw_event.event_id = base_id;
1916
1917        return &raw_event;
1918}
1919
1920static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
1921{
1922        unsigned int raw_id = config & 0xff;
1923        unsigned int base_id = raw_id & 0x7f;
1924
1925
1926        raw_event.cntr_mask = CNTR_ALL;
1927        raw_event.event_id = base_id;
1928
1929        if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
1930                if (base_id > 0x42)
1931                        return ERR_PTR(-EOPNOTSUPP);
1932        } else {
1933                if (base_id > 0x3a)
1934                        return ERR_PTR(-EOPNOTSUPP);
1935        }
1936
1937        switch (base_id) {
1938        case 0x00:
1939        case 0x0f:
1940        case 0x1e:
1941        case 0x1f:
1942        case 0x2f:
1943        case 0x34:
1944        case 0x3b ... 0x3f:
1945                return ERR_PTR(-EOPNOTSUPP);
1946        default:
1947                break;
1948        }
1949
1950        return &raw_event;
1951}
1952
1953static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config)
1954{
1955        unsigned int raw_id = config & 0xff;
1956
1957        /* Only 1-63 are defined */
1958        if ((raw_id < 0x01) || (raw_id > 0x3f))
1959                return ERR_PTR(-EOPNOTSUPP);
1960
1961        raw_event.cntr_mask = CNTR_ALL;
1962        raw_event.event_id = raw_id;
1963
1964        return &raw_event;
1965}
1966
1967static int __init
1968init_hw_perf_events(void)
1969{
1970        int counters, irq, pmu_type;
1971
1972        pr_info("Performance counters: ");
1973
1974        counters = n_counters();
1975        if (counters == 0) {
1976                pr_cont("No available PMU.\n");
1977                return -ENODEV;
1978        }
1979
1980#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1981        if (!cpu_has_mipsmt_pertccounters)
1982                counters = counters_total_to_per_cpu(counters);
1983#endif
1984
1985        if (get_c0_perfcount_int)
1986                irq = get_c0_perfcount_int();
1987        else if (cp0_perfcount_irq >= 0)
1988                irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
1989        else
1990                irq = -1;
1991
1992        mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
1993
1994        switch (current_cpu_type()) {
1995        case CPU_24K:
1996                mipspmu.name = "mips/24K";
1997                mipspmu.general_event_map = &mipsxxcore_event_map;
1998                mipspmu.cache_event_map = &mipsxxcore_cache_map;
1999                break;
2000        case CPU_34K:
2001                mipspmu.name = "mips/34K";
2002                mipspmu.general_event_map = &mipsxxcore_event_map;
2003                mipspmu.cache_event_map = &mipsxxcore_cache_map;
2004                break;
2005        case CPU_74K:
2006                mipspmu.name = "mips/74K";
2007                mipspmu.general_event_map = &mipsxxcore_event_map2;
2008                mipspmu.cache_event_map = &mipsxxcore_cache_map2;
2009                break;
2010        case CPU_PROAPTIV:
2011                mipspmu.name = "mips/proAptiv";
2012                mipspmu.general_event_map = &mipsxxcore_event_map2;
2013                mipspmu.cache_event_map = &mipsxxcore_cache_map2;
2014                break;
2015        case CPU_P5600:
2016                mipspmu.name = "mips/P5600";
2017                mipspmu.general_event_map = &mipsxxcore_event_map2;
2018                mipspmu.cache_event_map = &mipsxxcore_cache_map2;
2019                break;
2020        case CPU_P6600:
2021                mipspmu.name = "mips/P6600";
2022                mipspmu.general_event_map = &mipsxxcore_event_map2;
2023                mipspmu.cache_event_map = &mipsxxcore_cache_map2;
2024                break;
2025        case CPU_I6400:
2026                mipspmu.name = "mips/I6400";
2027                mipspmu.general_event_map = &i6x00_event_map;
2028                mipspmu.cache_event_map = &i6x00_cache_map;
2029                break;
2030        case CPU_I6500:
2031                mipspmu.name = "mips/I6500";
2032                mipspmu.general_event_map = &i6x00_event_map;
2033                mipspmu.cache_event_map = &i6x00_cache_map;
2034                break;
2035        case CPU_1004K:
2036                mipspmu.name = "mips/1004K";
2037                mipspmu.general_event_map = &mipsxxcore_event_map;
2038                mipspmu.cache_event_map = &mipsxxcore_cache_map;
2039                break;
2040        case CPU_1074K:
2041                mipspmu.name = "mips/1074K";
2042                mipspmu.general_event_map = &mipsxxcore_event_map;
2043                mipspmu.cache_event_map = &mipsxxcore_cache_map;
2044                break;
2045        case CPU_INTERAPTIV:
2046                mipspmu.name = "mips/interAptiv";
2047                mipspmu.general_event_map = &mipsxxcore_event_map;
2048                mipspmu.cache_event_map = &mipsxxcore_cache_map;
2049                break;
2050        case CPU_LOONGSON32:
2051                mipspmu.name = "mips/loongson1";
2052                mipspmu.general_event_map = &mipsxxcore_event_map;
2053                mipspmu.cache_event_map = &mipsxxcore_cache_map;
2054                break;
2055        case CPU_LOONGSON64:
2056                mipspmu.name = "mips/loongson3";
2057                pmu_type = get_loongson3_pmu_type();
2058
2059                switch (pmu_type) {
2060                case LOONGSON_PMU_TYPE1:
2061                        counters = 2;
2062                        mipspmu.general_event_map = &loongson3_event_map1;
2063                        mipspmu.cache_event_map = &loongson3_cache_map1;
2064                        break;
2065                case LOONGSON_PMU_TYPE2:
2066                        counters = 4;
2067                        mipspmu.general_event_map = &loongson3_event_map2;
2068                        mipspmu.cache_event_map = &loongson3_cache_map2;
2069                        break;
2070                case LOONGSON_PMU_TYPE3:
2071                        counters = 4;
2072                        mipspmu.general_event_map = &loongson3_event_map3;
2073                        mipspmu.cache_event_map = &loongson3_cache_map3;
2074                        break;
2075                }
2076                break;
2077        case CPU_CAVIUM_OCTEON:
2078        case CPU_CAVIUM_OCTEON_PLUS:
2079        case CPU_CAVIUM_OCTEON2:
2080                mipspmu.name = "octeon";
2081                mipspmu.general_event_map = &octeon_event_map;
2082                mipspmu.cache_event_map = &octeon_cache_map;
2083                mipspmu.map_raw_event = octeon_pmu_map_raw_event;
2084                break;
2085        case CPU_BMIPS5000:
2086                mipspmu.name = "BMIPS5000";
2087                mipspmu.general_event_map = &bmips5000_event_map;
2088                mipspmu.cache_event_map = &bmips5000_cache_map;
2089                break;
2090        case CPU_XLP:
2091                mipspmu.name = "xlp";
2092                mipspmu.general_event_map = &xlp_event_map;
2093                mipspmu.cache_event_map = &xlp_cache_map;
2094                mipspmu.map_raw_event = xlp_pmu_map_raw_event;
2095                break;
2096        default:
2097                pr_cont("Either hardware does not support performance "
2098                        "counters, or not yet implemented.\n");
2099                return -ENODEV;
2100        }
2101
2102        mipspmu.num_counters = counters;
2103        mipspmu.irq = irq;
2104
2105        if (read_c0_perfctrl0() & MIPS_PERFCTRL_W) {
2106                if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
2107                        counter_bits = 48;
2108                        mipspmu.max_period = (1ULL << 47) - 1;
2109                        mipspmu.valid_count = (1ULL << 47) - 1;
2110                        mipspmu.overflow = 1ULL << 47;
2111                } else {
2112                        counter_bits = 64;
2113                        mipspmu.max_period = (1ULL << 63) - 1;
2114                        mipspmu.valid_count = (1ULL << 63) - 1;
2115                        mipspmu.overflow = 1ULL << 63;
2116                }
2117                mipspmu.read_counter = mipsxx_pmu_read_counter_64;
2118                mipspmu.write_counter = mipsxx_pmu_write_counter_64;
2119        } else {
2120                counter_bits = 32;
2121                mipspmu.max_period = (1ULL << 31) - 1;
2122                mipspmu.valid_count = (1ULL << 31) - 1;
2123                mipspmu.overflow = 1ULL << 31;
2124                mipspmu.read_counter = mipsxx_pmu_read_counter;
2125                mipspmu.write_counter = mipsxx_pmu_write_counter;
2126        }
2127
2128        on_each_cpu(reset_counters, (void *)(long)counters, 1);
2129
2130        pr_cont("%s PMU enabled, %d %d-bit counters available to each "
2131                "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
2132                irq < 0 ? " (share with timer interrupt)" : "");
2133
2134        perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
2135
2136        return 0;
2137}
2138early_initcall(init_hw_perf_events);
2139