linux/arch/powerpc/kernel/pci_32.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Common pmac/prep/chrp pci routines. -- Cort
   4 */
   5
   6#include <linux/kernel.h>
   7#include <linux/pci.h>
   8#include <linux/delay.h>
   9#include <linux/string.h>
  10#include <linux/init.h>
  11#include <linux/capability.h>
  12#include <linux/sched.h>
  13#include <linux/errno.h>
  14#include <linux/memblock.h>
  15#include <linux/syscalls.h>
  16#include <linux/irq.h>
  17#include <linux/list.h>
  18#include <linux/of.h>
  19#include <linux/slab.h>
  20#include <linux/export.h>
  21
  22#include <asm/processor.h>
  23#include <asm/io.h>
  24#include <asm/prom.h>
  25#include <asm/sections.h>
  26#include <asm/pci-bridge.h>
  27#include <asm/ppc-pci.h>
  28#include <asm/byteorder.h>
  29#include <linux/uaccess.h>
  30#include <asm/machdep.h>
  31
  32#undef DEBUG
  33
  34unsigned long isa_io_base     = 0;
  35unsigned long pci_dram_offset = 0;
  36int pcibios_assign_bus_offset = 1;
  37EXPORT_SYMBOL(isa_io_base);
  38EXPORT_SYMBOL(pci_dram_offset);
  39
  40void pcibios_make_OF_bus_map(void);
  41
  42static void fixup_cpc710_pci64(struct pci_dev* dev);
  43static u8* pci_to_OF_bus_map;
  44
  45/* By default, we don't re-assign bus numbers. We do this only on
  46 * some pmacs
  47 */
  48static int pci_assign_all_buses;
  49
  50static int pci_bus_count;
  51
  52/* This will remain NULL for now, until isa-bridge.c is made common
  53 * to both 32-bit and 64-bit.
  54 */
  55struct pci_dev *isa_bridge_pcidev;
  56EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
  57
  58static void
  59fixup_cpc710_pci64(struct pci_dev* dev)
  60{
  61        /* Hide the PCI64 BARs from the kernel as their content doesn't
  62         * fit well in the resource management
  63         */
  64        dev->resource[0].start = dev->resource[0].end = 0;
  65        dev->resource[0].flags = 0;
  66        dev->resource[1].start = dev->resource[1].end = 0;
  67        dev->resource[1].flags = 0;
  68}
  69DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,     PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
  70
  71/*
  72 * Functions below are used on OpenFirmware machines.
  73 */
  74static void
  75make_one_node_map(struct device_node* node, u8 pci_bus)
  76{
  77        const int *bus_range;
  78        int len;
  79
  80        if (pci_bus >= pci_bus_count)
  81                return;
  82        bus_range = of_get_property(node, "bus-range", &len);
  83        if (bus_range == NULL || len < 2 * sizeof(int)) {
  84                printk(KERN_WARNING "Can't get bus-range for %pOF, "
  85                       "assuming it starts at 0\n", node);
  86                pci_to_OF_bus_map[pci_bus] = 0;
  87        } else
  88                pci_to_OF_bus_map[pci_bus] = bus_range[0];
  89
  90        for_each_child_of_node(node, node) {
  91                struct pci_dev* dev;
  92                const unsigned int *class_code, *reg;
  93        
  94                class_code = of_get_property(node, "class-code", NULL);
  95                if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
  96                        (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
  97                        continue;
  98                reg = of_get_property(node, "reg", NULL);
  99                if (!reg)
 100                        continue;
 101                dev = pci_get_domain_bus_and_slot(0, pci_bus,
 102                                                  ((reg[0] >> 8) & 0xff));
 103                if (!dev || !dev->subordinate) {
 104                        pci_dev_put(dev);
 105                        continue;
 106                }
 107                make_one_node_map(node, dev->subordinate->number);
 108                pci_dev_put(dev);
 109        }
 110}
 111        
 112void
 113pcibios_make_OF_bus_map(void)
 114{
 115        int i;
 116        struct pci_controller *hose, *tmp;
 117        struct property *map_prop;
 118        struct device_node *dn;
 119
 120        pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
 121        if (!pci_to_OF_bus_map) {
 122                printk(KERN_ERR "Can't allocate OF bus map !\n");
 123                return;
 124        }
 125
 126        /* We fill the bus map with invalid values, that helps
 127         * debugging.
 128         */
 129        for (i=0; i<pci_bus_count; i++)
 130                pci_to_OF_bus_map[i] = 0xff;
 131
 132        /* For each hose, we begin searching bridges */
 133        list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 134                struct device_node* node = hose->dn;
 135
 136                if (!node)
 137                        continue;
 138                make_one_node_map(node, hose->first_busno);
 139        }
 140        dn = of_find_node_by_path("/");
 141        map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
 142        if (map_prop) {
 143                BUG_ON(pci_bus_count > map_prop->length);
 144                memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
 145        }
 146        of_node_put(dn);
 147#ifdef DEBUG
 148        printk("PCI->OF bus map:\n");
 149        for (i=0; i<pci_bus_count; i++) {
 150                if (pci_to_OF_bus_map[i] == 0xff)
 151                        continue;
 152                printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
 153        }
 154#endif
 155}
 156
 157
 158/*
 159 * Returns the PCI device matching a given OF node
 160 */
 161int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
 162{
 163        struct pci_dev *dev = NULL;
 164        const __be32 *reg;
 165        int size;
 166
 167        /* Check if it might have a chance to be a PCI device */
 168        if (!pci_find_hose_for_OF_device(node))
 169                return -ENODEV;
 170
 171        reg = of_get_property(node, "reg", &size);
 172        if (!reg || size < 5 * sizeof(u32))
 173                return -ENODEV;
 174
 175        *bus = (be32_to_cpup(&reg[0]) >> 16) & 0xff;
 176        *devfn = (be32_to_cpup(&reg[0]) >> 8) & 0xff;
 177
 178        /* Ok, here we need some tweak. If we have already renumbered
 179         * all busses, we can't rely on the OF bus number any more.
 180         * the pci_to_OF_bus_map is not enough as several PCI busses
 181         * may match the same OF bus number.
 182         */
 183        if (!pci_to_OF_bus_map)
 184                return 0;
 185
 186        for_each_pci_dev(dev)
 187                if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
 188                                dev->devfn == *devfn) {
 189                        *bus = dev->bus->number;
 190                        pci_dev_put(dev);
 191                        return 0;
 192                }
 193
 194        return -ENODEV;
 195}
 196EXPORT_SYMBOL(pci_device_from_OF_node);
 197
 198/* We create the "pci-OF-bus-map" property now so it appears in the
 199 * /proc device tree
 200 */
 201void __init
 202pci_create_OF_bus_map(void)
 203{
 204        struct property* of_prop;
 205        struct device_node *dn;
 206
 207        of_prop = memblock_alloc(sizeof(struct property) + 256,
 208                                 SMP_CACHE_BYTES);
 209        if (!of_prop)
 210                panic("%s: Failed to allocate %zu bytes\n", __func__,
 211                      sizeof(struct property) + 256);
 212        dn = of_find_node_by_path("/");
 213        if (dn) {
 214                memset(of_prop, -1, sizeof(struct property) + 256);
 215                of_prop->name = "pci-OF-bus-map";
 216                of_prop->length = 256;
 217                of_prop->value = &of_prop[1];
 218                of_add_property(dn, of_prop);
 219                of_node_put(dn);
 220        }
 221}
 222
 223void pcibios_setup_phb_io_space(struct pci_controller *hose)
 224{
 225        unsigned long io_offset;
 226        struct resource *res = &hose->io_resource;
 227
 228        /* Fixup IO space offset */
 229        io_offset = pcibios_io_space_offset(hose);
 230        res->start += io_offset;
 231        res->end += io_offset;
 232}
 233
 234static int __init pcibios_init(void)
 235{
 236        struct pci_controller *hose, *tmp;
 237        int next_busno = 0;
 238
 239        printk(KERN_INFO "PCI: Probing PCI hardware\n");
 240
 241        if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
 242                pci_assign_all_buses = 1;
 243
 244        /* Scan all of the recorded PCI controllers.  */
 245        list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 246                if (pci_assign_all_buses)
 247                        hose->first_busno = next_busno;
 248                hose->last_busno = 0xff;
 249                pcibios_scan_phb(hose);
 250                pci_bus_add_devices(hose->bus);
 251                if (pci_assign_all_buses || next_busno <= hose->last_busno)
 252                        next_busno = hose->last_busno + pcibios_assign_bus_offset;
 253        }
 254        pci_bus_count = next_busno;
 255
 256        /* OpenFirmware based machines need a map of OF bus
 257         * numbers vs. kernel bus numbers since we may have to
 258         * remap them.
 259         */
 260        if (pci_assign_all_buses)
 261                pcibios_make_OF_bus_map();
 262
 263        /* Call common code to handle resource allocation */
 264        pcibios_resource_survey();
 265
 266        /* Call machine dependent fixup */
 267        if (ppc_md.pcibios_fixup)
 268                ppc_md.pcibios_fixup();
 269
 270        /* Call machine dependent post-init code */
 271        if (ppc_md.pcibios_after_init)
 272                ppc_md.pcibios_after_init();
 273
 274        return 0;
 275}
 276
 277subsys_initcall(pcibios_init);
 278
 279static struct pci_controller*
 280pci_bus_to_hose(int bus)
 281{
 282        struct pci_controller *hose, *tmp;
 283
 284        list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 285                if (bus >= hose->first_busno && bus <= hose->last_busno)
 286                        return hose;
 287        return NULL;
 288}
 289
 290/* Provide information on locations of various I/O regions in physical
 291 * memory.  Do this on a per-card basis so that we choose the right
 292 * root bridge.
 293 * Note that the returned IO or memory base is a physical address
 294 */
 295
 296SYSCALL_DEFINE3(pciconfig_iobase, long, which,
 297                unsigned long, bus, unsigned long, devfn)
 298{
 299        struct pci_controller* hose;
 300        long result = -EOPNOTSUPP;
 301
 302        hose = pci_bus_to_hose(bus);
 303        if (!hose)
 304                return -ENODEV;
 305
 306        switch (which) {
 307        case IOBASE_BRIDGE_NUMBER:
 308                return (long)hose->first_busno;
 309        case IOBASE_MEMORY:
 310                return (long)hose->mem_offset[0];
 311        case IOBASE_IO:
 312                return (long)hose->io_base_phys;
 313        case IOBASE_ISA_IO:
 314                return (long)isa_io_base;
 315        case IOBASE_ISA_MEM:
 316                return (long)isa_mem_base;
 317        }
 318
 319        return result;
 320}
 321