/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Copyright (C) 2012 Regents of the University of California
 *
 * This file was copied from include/asm-generic/uaccess.h
 */

#ifndef _ASM_RISCV_UACCESS_H
#define _ASM_RISCV_UACCESS_H

#include <asm/pgtable.h>                /* for TASK_SIZE */

/*
 * User space memory access functions
 */

extern unsigned long __must_check __asm_copy_to_user(void __user *to,
        const void *from, unsigned long n);
extern unsigned long __must_check __asm_copy_from_user(void *to,
        const void __user *from, unsigned long n);

static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
        return __asm_copy_from_user(to, from, n);
}

static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
        return __asm_copy_to_user(to, from, n);
}

#ifdef CONFIG_MMU
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/byteorder.h>
#include <asm/extable.h>
#include <asm/asm.h>

#define __enable_user_access()                                                  \
        __asm__ __volatile__ ("csrs sstatus, %0" : : "r" (SR_SUM) : "memory")
#define __disable_user_access()                                                 \
        __asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory")

/*
 * The fs value determines whether argument validity checking should be
 * performed or not.  If get_fs() == USER_DS, checking is performed, with
 * get_fs() == KERNEL_DS, checking is bypassed.
 *
 * For historical reasons, these macros are grossly misnamed.
 */

#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })

#define KERNEL_DS       MAKE_MM_SEG(~0UL)
#define USER_DS         MAKE_MM_SEG(TASK_SIZE)

#define get_fs()        (current_thread_info()->addr_limit)

static inline void set_fs(mm_segment_t fs)
{
        current_thread_info()->addr_limit = fs;
}

#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
#define user_addr_max() (get_fs().seg)

/**
 * access_ok: - Checks if a user space pointer is valid
 * @addr: User space pointer to start of block to check
 * @size: Size of block to check
 *
 * Context: User context only.  This function may sleep.
 *
 * Checks if a pointer to a block of memory in user space is valid.
 *
 * Returns true (nonzero) if the memory block may be valid, false (zero)
 * if it is definitely invalid.
 *
 * Note that, depending on architecture, this function probably just
 * checks that the pointer is in the user space range - after calling
 * this function, memory access functions may still return -EFAULT.
 */
#define access_ok(addr, size) ({                                        \
        __chk_user_ptr(addr);                                           \
        likely(__access_ok((unsigned long __force)(addr), (size)));     \
})

/*
 * Ensure that the range [addr, addr+size) is within the process's
 * address space
 */
static inline int __access_ok(unsigned long addr, unsigned long size)
{
        const mm_segment_t fs = get_fs();

        return size <= fs.seg && addr <= fs.seg - size;
}

/*
 * The exception table consists of pairs of addresses: the first is the
 * address of an instruction that is allowed to fault, and the second is
 * the address at which the program should continue.  No registers are
 * modified, so it is entirely up to the continuation code to figure out
 * what to do.
 *
 * All the routines below use bits of fixup code that are out of line
 * with the main instruction path.  This means when everything is well,
 * we don't even have to jump over them.  Further, they do not intrude
 * on our cache or tlb entries.
 */

#define __LSW   0
#define __MSW   1

/*
 * The "__xxx" versions of the user access functions do not verify the address
 * space - it must have been done previously with a separate "access_ok()"
 * call.
 */

#define __get_user_asm(insn, x, ptr, err)                       \
do {                                                            \
        uintptr_t __tmp;                                        \
        __typeof__(x) __x;                                      \
        __enable_user_access();                                 \
        __asm__ __volatile__ (                                  \
                "1:\n"                                          \
                "       " insn " %1, %3\n"                      \
                "2:\n"                                          \
                "       .section .fixup,\"ax\"\n"               \
                "       .balign 4\n"                            \
                "3:\n"                                          \
                "       li %0, %4\n"                            \
                "       li %1, 0\n"                             \
                "       jump 2b, %2\n"                          \
                "       .previous\n"                            \
                "       .section __ex_table,\"a\"\n"            \
                "       .balign " RISCV_SZPTR "\n"                      \
                "       " RISCV_PTR " 1b, 3b\n"                 \
                "       .previous"                              \
                : "+r" (err), "=&r" (__x), "=r" (__tmp)         \
                : "m" (*(ptr)), "i" (-EFAULT));                 \
        __disable_user_access();                                \
        (x) = __x;                                              \
} while (0)

#ifdef CONFIG_64BIT
#define __get_user_8(x, ptr, err) \
        __get_user_asm("ld", x, ptr, err)
#else /* !CONFIG_64BIT */
#define __get_user_8(x, ptr, err)                               \
do {                                                            \
        u32 __user *__ptr = (u32 __user *)(ptr);                \
        u32 __lo, __hi;                                         \
        uintptr_t __tmp;                                        \
        __enable_user_access();                                 \
        __asm__ __volatile__ (                                  \
                "1:\n"                                          \
                "       lw %1, %4\n"                            \
                "2:\n"                                          \
                "       lw %2, %5\n"                            \
                "3:\n"                                          \
                "       .section .fixup,\"ax\"\n"               \
                "       .balign 4\n"                            \
                "4:\n"                                          \
                "       li %0, %6\n"                            \
                "       li %1, 0\n"                             \
                "       li %2, 0\n"                             \
                "       jump 3b, %3\n"                          \
                "       .previous\n"                            \
                "       .section __ex_table,\"a\"\n"            \
                "       .balign " RISCV_SZPTR "\n"                      \
                "       " RISCV_PTR " 1b, 4b\n"                 \
                "       " RISCV_PTR " 2b, 4b\n"                 \
                "       .previous"                              \
                : "+r" (err), "=&r" (__lo), "=r" (__hi),        \
                        "=r" (__tmp)                            \
                : "m" (__ptr[__LSW]), "m" (__ptr[__MSW]),       \
                        "i" (-EFAULT));                         \
        __disable_user_access();                                \
        (x) = (__typeof__(x))((__typeof__((x)-(x)))(            \
                (((u64)__hi << 32) | __lo)));                   \
} while (0)
#endif /* CONFIG_64BIT */


/**
 * __get_user: - Get a simple variable from user space, with less checking.
 * @x:   Variable to store result.
 * @ptr: Source address, in user space.
 *
 * Context: User context only.  This function may sleep.
 *
 * This macro copies a single simple variable from user space to kernel
 * space.  It supports simple types like char and int, but not larger
 * data types like structures or arrays.
 *
 * @ptr must have pointer-to-simple-variable type, and the result of
 * dereferencing @ptr must be assignable to @x without a cast.
 *
 * Caller must check the pointer with access_ok() before calling this
 * function.
 *
 * Returns zero on success, or -EFAULT on error.
 * On error, the variable @x is set to zero.
 */
#define __get_user(x, ptr)                                      \
({                                                              \
        register long __gu_err = 0;                             \
        const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);      \
        __chk_user_ptr(__gu_ptr);                               \
        switch (sizeof(*__gu_ptr)) {                            \
        case 1:                                                 \
                __get_user_asm("lb", (x), __gu_ptr, __gu_err);  \
                break;                                          \
        case 2:                                                 \
                __get_user_asm("lh", (x), __gu_ptr, __gu_err);  \
                break;                                          \
        case 4:                                                 \
                __get_user_asm("lw", (x), __gu_ptr, __gu_err);  \
                break;                                          \
        case 8:                                                 \
                __get_user_8((x), __gu_ptr, __gu_err);  \
                break;                                          \
        default:                                                \
                BUILD_BUG();                                    \
        }                                                       \
        __gu_err;                                               \
})

/**
 * get_user: - Get a simple variable from user space.
 * @x:   Variable to store result.
 * @ptr: Source address, in user space.
 *
 * Context: User context only.  This function may sleep.
 *
 * This macro copies a single simple variable from user space to kernel
 * space.  It supports simple types like char and int, but not larger
 * data types like structures or arrays.
 *
 * @ptr must have pointer-to-simple-variable type, and the result of
 * dereferencing @ptr must be assignable to @x without a cast.
 *
 * Returns zero on success, or -EFAULT on error.
 * On error, the variable @x is set to zero.
 */
#define get_user(x, ptr)                                        \
({                                                              \
        const __typeof__(*(ptr)) __user *__p = (ptr);           \
        might_fault();                                          \
        access_ok(__p, sizeof(*__p)) ?          \
                __get_user((x), __p) :                          \
                ((x) = 0, -EFAULT);                             \
})

#define __put_user_asm(insn, x, ptr, err)                       \
do {                                                            \
        uintptr_t __tmp;                                        \
        __typeof__(*(ptr)) __x = x;                             \
        __enable_user_access();                                 \
        __asm__ __volatile__ (                                  \
                "1:\n"                                          \
                "       " insn " %z3, %2\n"                     \
                "2:\n"                                          \
                "       .section .fixup,\"ax\"\n"               \
                "       .balign 4\n"                            \
                "3:\n"                                          \
                "       li %0, %4\n"                            \
                "       jump 2b, %1\n"                          \
                "       .previous\n"                            \
                "       .section __ex_table,\"a\"\n"            \
                "       .balign " RISCV_SZPTR "\n"                      \
                "       " RISCV_PTR " 1b, 3b\n"                 \
                "       .previous"                              \
                : "+r" (err), "=r" (__tmp), "=m" (*(ptr))       \
                : "rJ" (__x), "i" (-EFAULT));                   \
        __disable_user_access();                                \
} while (0)

#ifdef CONFIG_64BIT
#define __put_user_8(x, ptr, err) \
        __put_user_asm("sd", x, ptr, err)
#else /* !CONFIG_64BIT */
#define __put_user_8(x, ptr, err)                               \
do {                                                            \
        u32 __user *__ptr = (u32 __user *)(ptr);                \
        u64 __x = (__typeof__((x)-(x)))(x);                     \
        uintptr_t __tmp;                                        \
        __enable_user_access();                                 \
        __asm__ __volatile__ (                                  \
                "1:\n"                                          \
                "       sw %z4, %2\n"                           \
                "2:\n"                                          \
                "       sw %z5, %3\n"                           \
                "3:\n"                                          \
                "       .section .fixup,\"ax\"\n"               \
                "       .balign 4\n"                            \
                "4:\n"                                          \
                "       li %0, %6\n"                            \
                "       jump 3b, %1\n"                          \
                "       .previous\n"                            \
                "       .section __ex_table,\"a\"\n"            \
                "       .balign " RISCV_SZPTR "\n"                      \
                "       " RISCV_PTR " 1b, 4b\n"                 \
                "       " RISCV_PTR " 2b, 4b\n"                 \
                "       .previous"                              \
                : "+r" (err), "=r" (__tmp),                     \
                        "=m" (__ptr[__LSW]),                    \
                        "=m" (__ptr[__MSW])                     \
                : "rJ" (__x), "rJ" (__x >> 32), "i" (-EFAULT)); \
        __disable_user_access();                                \
} while (0)
#endif /* CONFIG_64BIT */


/**
 * __put_user: - Write a simple value into user space, with less checking.
 * @x:   Value to copy to user space.
 * @ptr: Destination address, in user space.
 *
 * Context: User context only.  This function may sleep.
 *
 * This macro copies a single simple value from kernel space to user
 * space.  It supports simple types like char and int, but not larger
 * data types like structures or arrays.
 *
 * @ptr must have pointer-to-simple-variable type, and @x must be assignable
 * to the result of dereferencing @ptr.
 *
 * Caller must check the pointer with access_ok() before calling this
 * function.
 *
 * Returns zero on success, or -EFAULT on error.
 */
#define __put_user(x, ptr)                                      \
({                                                              \
        register long __pu_err = 0;                             \
        __typeof__(*(ptr)) __user *__gu_ptr = (ptr);            \
        __chk_user_ptr(__gu_ptr);                               \
        switch (sizeof(*__gu_ptr)) {                            \
        case 1:                                                 \
                __put_user_asm("sb", (x), __gu_ptr, __pu_err);  \
                break;                                          \
        case 2:                                                 \
                __put_user_asm("sh", (x), __gu_ptr, __pu_err);  \
                break;                                          \
        case 4:                                                 \
                __put_user_asm("sw", (x), __gu_ptr, __pu_err);  \
                break;                                          \
        case 8:                                                 \
                __put_user_8((x), __gu_ptr, __pu_err);  \
                break;                                          \
        default:                                                \
                BUILD_BUG();                                    \
        }                                                       \
        __pu_err;                                               \
})

/**
 * put_user: - Write a simple value into user space.
 * @x:   Value to copy to user space.
 * @ptr: Destination address, in user space.
 *
 * Context: User context only.  This function may sleep.
 *
 * This macro copies a single simple value from kernel space to user
 * space.  It supports simple types like char and int, but not larger
 * data types like structures or arrays.
 *
 * @ptr must have pointer-to-simple-variable type, and @x must be assignable
 * to the result of dereferencing @ptr.
 *
 * Returns zero on success, or -EFAULT on error.
 */
#define put_user(x, ptr)                                        \
({                                                              \
        __typeof__(*(ptr)) __user *__p = (ptr);                 \
        might_fault();                                          \
        access_ok(__p, sizeof(*__p)) ?          \
                __put_user((x), __p) :                          \
                -EFAULT;                                        \
})

extern long strncpy_from_user(char *dest, const char __user *src, long count);

extern long __must_check strlen_user(const char __user *str);
extern long __must_check strnlen_user(const char __user *str, long n);

extern
unsigned long __must_check __clear_user(void __user *addr, unsigned long n);

static inline
unsigned long __must_check clear_user(void __user *to, unsigned long n)
{
        might_fault();
        return access_ok(to, n) ?
                __clear_user(to, n) : n;
}

/*
 * Atomic compare-and-exchange, but with a fixup for userspace faults.  Faults
 * will set "err" to -EFAULT, while successful accesses return the previous
 * value.
 */
#define __cmpxchg_user(ptr, old, new, err, size, lrb, scb)      \
({                                                              \
        __typeof__(ptr) __ptr = (ptr);                          \
        __typeof__(*(ptr)) __old = (old);                       \
        __typeof__(*(ptr)) __new = (new);                       \
        __typeof__(*(ptr)) __ret;                               \
        __typeof__(err) __err = 0;                              \
        register unsigned int __rc;                             \
        __enable_user_access();                                 \
        switch (size) {                                         \
        case 4:                                                 \
                __asm__ __volatile__ (                          \
                "0:\n"                                          \
                "       lr.w" #scb " %[ret], %[ptr]\n"          \
                "       bne          %[ret], %z[old], 1f\n"     \
                "       sc.w" #lrb " %[rc], %z[new], %[ptr]\n"  \
                "       bnez         %[rc], 0b\n"               \
                "1:\n"                                          \
                ".section .fixup,\"ax\"\n"                      \
                ".balign 4\n"                                   \
                "2:\n"                                          \
                "       li %[err], %[efault]\n"                 \
                "       jump 1b, %[rc]\n"                       \
                ".previous\n"                                   \
                ".section __ex_table,\"a\"\n"                   \
                ".balign " RISCV_SZPTR "\n"                     \
                "       " RISCV_PTR " 1b, 2b\n"                 \
                ".previous\n"                                   \
                        : [ret] "=&r" (__ret),                  \
                          [rc]  "=&r" (__rc),                   \
                          [ptr] "+A" (*__ptr),                  \
                          [err] "=&r" (__err)                   \
                        : [old] "rJ" (__old),                   \
                          [new] "rJ" (__new),                   \
                          [efault] "i" (-EFAULT));              \
                break;                                          \
        case 8:                                                 \
                __asm__ __volatile__ (                          \
                "0:\n"                                          \
                "       lr.d" #scb " %[ret], %[ptr]\n"          \
                "       bne          %[ret], %z[old], 1f\n"     \
                "       sc.d" #lrb " %[rc], %z[new], %[ptr]\n"  \
                "       bnez         %[rc], 0b\n"               \
                "1:\n"                                          \
                ".section .fixup,\"ax\"\n"                      \
                ".balign 4\n"                                   \
                "2:\n"                                          \
                "       li %[err], %[efault]\n"                 \
                "       jump 1b, %[rc]\n"                       \
                ".previous\n"                                   \
                ".section __ex_table,\"a\"\n"                   \
                ".balign " RISCV_SZPTR "\n"                     \
                "       " RISCV_PTR " 1b, 2b\n"                 \
                ".previous\n"                                   \
                        : [ret] "=&r" (__ret),                  \
                          [rc]  "=&r" (__rc),                   \
                          [ptr] "+A" (*__ptr),                  \
                          [err] "=&r" (__err)                   \
                        : [old] "rJ" (__old),                   \
                          [new] "rJ" (__new),                   \
                          [efault] "i" (-EFAULT));              \
                break;                                          \
        default:                                                \
                BUILD_BUG();                                    \
        }                                                       \
        __disable_user_access();                                \
        (err) = __err;                                          \
        __ret;                                                  \
})

#else /* CONFIG_MMU */
#include <asm-generic/uaccess.h>
#endif /* CONFIG_MMU */
#endif /* _ASM_RISCV_UACCESS_H */