linux/drivers/ata/sata_sil24.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
   4 *
   5 * Copyright 2005  Tejun Heo
   6 *
   7 * Based on preview driver from Silicon Image.
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/module.h>
  12#include <linux/gfp.h>
  13#include <linux/pci.h>
  14#include <linux/blkdev.h>
  15#include <linux/delay.h>
  16#include <linux/interrupt.h>
  17#include <linux/dma-mapping.h>
  18#include <linux/device.h>
  19#include <scsi/scsi_host.h>
  20#include <scsi/scsi_cmnd.h>
  21#include <linux/libata.h>
  22
  23#define DRV_NAME        "sata_sil24"
  24#define DRV_VERSION     "1.1"
  25
  26/*
  27 * Port request block (PRB) 32 bytes
  28 */
  29struct sil24_prb {
  30        __le16  ctrl;
  31        __le16  prot;
  32        __le32  rx_cnt;
  33        u8      fis[6 * 4];
  34};
  35
  36/*
  37 * Scatter gather entry (SGE) 16 bytes
  38 */
  39struct sil24_sge {
  40        __le64  addr;
  41        __le32  cnt;
  42        __le32  flags;
  43};
  44
  45
  46enum {
  47        SIL24_HOST_BAR          = 0,
  48        SIL24_PORT_BAR          = 2,
  49
  50        /* sil24 fetches in chunks of 64bytes.  The first block
  51         * contains the PRB and two SGEs.  From the second block, it's
  52         * consisted of four SGEs and called SGT.  Calculate the
  53         * number of SGTs that fit into one page.
  54         */
  55        SIL24_PRB_SZ            = sizeof(struct sil24_prb)
  56                                  + 2 * sizeof(struct sil24_sge),
  57        SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
  58                                  / (4 * sizeof(struct sil24_sge)),
  59
  60        /* This will give us one unused SGEs for ATA.  This extra SGE
  61         * will be used to store CDB for ATAPI devices.
  62         */
  63        SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
  64
  65        /*
  66         * Global controller registers (128 bytes @ BAR0)
  67         */
  68                /* 32 bit regs */
  69        HOST_SLOT_STAT          = 0x00, /* 32 bit slot stat * 4 */
  70        HOST_CTRL               = 0x40,
  71        HOST_IRQ_STAT           = 0x44,
  72        HOST_PHY_CFG            = 0x48,
  73        HOST_BIST_CTRL          = 0x50,
  74        HOST_BIST_PTRN          = 0x54,
  75        HOST_BIST_STAT          = 0x58,
  76        HOST_MEM_BIST_STAT      = 0x5c,
  77        HOST_FLASH_CMD          = 0x70,
  78                /* 8 bit regs */
  79        HOST_FLASH_DATA         = 0x74,
  80        HOST_TRANSITION_DETECT  = 0x75,
  81        HOST_GPIO_CTRL          = 0x76,
  82        HOST_I2C_ADDR           = 0x78, /* 32 bit */
  83        HOST_I2C_DATA           = 0x7c,
  84        HOST_I2C_XFER_CNT       = 0x7e,
  85        HOST_I2C_CTRL           = 0x7f,
  86
  87        /* HOST_SLOT_STAT bits */
  88        HOST_SSTAT_ATTN         = (1 << 31),
  89
  90        /* HOST_CTRL bits */
  91        HOST_CTRL_M66EN         = (1 << 16), /* M66EN PCI bus signal */
  92        HOST_CTRL_TRDY          = (1 << 17), /* latched PCI TRDY */
  93        HOST_CTRL_STOP          = (1 << 18), /* latched PCI STOP */
  94        HOST_CTRL_DEVSEL        = (1 << 19), /* latched PCI DEVSEL */
  95        HOST_CTRL_REQ64         = (1 << 20), /* latched PCI REQ64 */
  96        HOST_CTRL_GLOBAL_RST    = (1 << 31), /* global reset */
  97
  98        /*
  99         * Port registers
 100         * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
 101         */
 102        PORT_REGS_SIZE          = 0x2000,
 103
 104        PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
 105        PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 106
 107        PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
 108        PORT_PMP_STATUS         = 0x0000, /* port device status offset */
 109        PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
 110        PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
 111
 112                /* 32 bit regs */
 113        PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
 114        PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
 115        PORT_IRQ_STAT           = 0x1008, /* high: status, low: interrupt */
 116        PORT_IRQ_ENABLE_SET     = 0x1010, /* write: enable-set */
 117        PORT_IRQ_ENABLE_CLR     = 0x1014, /* write: enable-clear */
 118        PORT_ACTIVATE_UPPER_ADDR= 0x101c,
 119        PORT_EXEC_FIFO          = 0x1020, /* command execution fifo */
 120        PORT_CMD_ERR            = 0x1024, /* command error number */
 121        PORT_FIS_CFG            = 0x1028,
 122        PORT_FIFO_THRES         = 0x102c,
 123                /* 16 bit regs */
 124        PORT_DECODE_ERR_CNT     = 0x1040,
 125        PORT_DECODE_ERR_THRESH  = 0x1042,
 126        PORT_CRC_ERR_CNT        = 0x1044,
 127        PORT_CRC_ERR_THRESH     = 0x1046,
 128        PORT_HSHK_ERR_CNT       = 0x1048,
 129        PORT_HSHK_ERR_THRESH    = 0x104a,
 130                /* 32 bit regs */
 131        PORT_PHY_CFG            = 0x1050,
 132        PORT_SLOT_STAT          = 0x1800,
 133        PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
 134        PORT_CONTEXT            = 0x1e04,
 135        PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
 136        PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
 137        PORT_SCONTROL           = 0x1f00,
 138        PORT_SSTATUS            = 0x1f04,
 139        PORT_SERROR             = 0x1f08,
 140        PORT_SACTIVE            = 0x1f0c,
 141
 142        /* PORT_CTRL_STAT bits */
 143        PORT_CS_PORT_RST        = (1 << 0), /* port reset */
 144        PORT_CS_DEV_RST         = (1 << 1), /* device reset */
 145        PORT_CS_INIT            = (1 << 2), /* port initialize */
 146        PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
 147        PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
 148        PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
 149        PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
 150        PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
 151        PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
 152
 153        /* PORT_IRQ_STAT/ENABLE_SET/CLR */
 154        /* bits[11:0] are masked */
 155        PORT_IRQ_COMPLETE       = (1 << 0), /* command(s) completed */
 156        PORT_IRQ_ERROR          = (1 << 1), /* command execution error */
 157        PORT_IRQ_PORTRDY_CHG    = (1 << 2), /* port ready change */
 158        PORT_IRQ_PWR_CHG        = (1 << 3), /* power management change */
 159        PORT_IRQ_PHYRDY_CHG     = (1 << 4), /* PHY ready change */
 160        PORT_IRQ_COMWAKE        = (1 << 5), /* COMWAKE received */
 161        PORT_IRQ_UNK_FIS        = (1 << 6), /* unknown FIS received */
 162        PORT_IRQ_DEV_XCHG       = (1 << 7), /* device exchanged */
 163        PORT_IRQ_8B10B          = (1 << 8), /* 8b/10b decode error threshold */
 164        PORT_IRQ_CRC            = (1 << 9), /* CRC error threshold */
 165        PORT_IRQ_HANDSHAKE      = (1 << 10), /* handshake error threshold */
 166        PORT_IRQ_SDB_NOTIFY     = (1 << 11), /* SDB notify received */
 167
 168        DEF_PORT_IRQ            = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
 169                                  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
 170                                  PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
 171
 172        /* bits[27:16] are unmasked (raw) */
 173        PORT_IRQ_RAW_SHIFT      = 16,
 174        PORT_IRQ_MASKED_MASK    = 0x7ff,
 175        PORT_IRQ_RAW_MASK       = (0x7ff << PORT_IRQ_RAW_SHIFT),
 176
 177        /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
 178        PORT_IRQ_STEER_SHIFT    = 30,
 179        PORT_IRQ_STEER_MASK     = (3 << PORT_IRQ_STEER_SHIFT),
 180
 181        /* PORT_CMD_ERR constants */
 182        PORT_CERR_DEV           = 1, /* Error bit in D2H Register FIS */
 183        PORT_CERR_SDB           = 2, /* Error bit in SDB FIS */
 184        PORT_CERR_DATA          = 3, /* Error in data FIS not detected by dev */
 185        PORT_CERR_SEND          = 4, /* Initial cmd FIS transmission failure */
 186        PORT_CERR_INCONSISTENT  = 5, /* Protocol mismatch */
 187        PORT_CERR_DIRECTION     = 6, /* Data direction mismatch */
 188        PORT_CERR_UNDERRUN      = 7, /* Ran out of SGEs while writing */
 189        PORT_CERR_OVERRUN       = 8, /* Ran out of SGEs while reading */
 190        PORT_CERR_PKT_PROT      = 11, /* DIR invalid in 1st PIO setup of ATAPI */
 191        PORT_CERR_SGT_BOUNDARY  = 16, /* PLD ecode 00 - SGT not on qword boundary */
 192        PORT_CERR_SGT_TGTABRT   = 17, /* PLD ecode 01 - target abort */
 193        PORT_CERR_SGT_MSTABRT   = 18, /* PLD ecode 10 - master abort */
 194        PORT_CERR_SGT_PCIPERR   = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
 195        PORT_CERR_CMD_BOUNDARY  = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
 196        PORT_CERR_CMD_TGTABRT   = 25, /* ctrl[15:13] 010 - target abort */
 197        PORT_CERR_CMD_MSTABRT   = 26, /* ctrl[15:13] 100 - master abort */
 198        PORT_CERR_CMD_PCIPERR   = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
 199        PORT_CERR_XFR_UNDEF     = 32, /* PSD ecode 00 - undefined */
 200        PORT_CERR_XFR_TGTABRT   = 33, /* PSD ecode 01 - target abort */
 201        PORT_CERR_XFR_MSTABRT   = 34, /* PSD ecode 10 - master abort */
 202        PORT_CERR_XFR_PCIPERR   = 35, /* PSD ecode 11 - PCI prity err during transfer */
 203        PORT_CERR_SENDSERVICE   = 36, /* FIS received while sending service */
 204
 205        /* bits of PRB control field */
 206        PRB_CTRL_PROTOCOL       = (1 << 0), /* override def. ATA protocol */
 207        PRB_CTRL_PACKET_READ    = (1 << 4), /* PACKET cmd read */
 208        PRB_CTRL_PACKET_WRITE   = (1 << 5), /* PACKET cmd write */
 209        PRB_CTRL_NIEN           = (1 << 6), /* Mask completion irq */
 210        PRB_CTRL_SRST           = (1 << 7), /* Soft reset request (ign BSY?) */
 211
 212        /* PRB protocol field */
 213        PRB_PROT_PACKET         = (1 << 0),
 214        PRB_PROT_TCQ            = (1 << 1),
 215        PRB_PROT_NCQ            = (1 << 2),
 216        PRB_PROT_READ           = (1 << 3),
 217        PRB_PROT_WRITE          = (1 << 4),
 218        PRB_PROT_TRANSPARENT    = (1 << 5),
 219
 220        /*
 221         * Other constants
 222         */
 223        SGE_TRM                 = (1 << 31), /* Last SGE in chain */
 224        SGE_LNK                 = (1 << 30), /* linked list
 225                                                Points to SGT, not SGE */
 226        SGE_DRD                 = (1 << 29), /* discard data read (/dev/null)
 227                                                data address ignored */
 228
 229        SIL24_MAX_CMDS          = 31,
 230
 231        /* board id */
 232        BID_SIL3124             = 0,
 233        BID_SIL3132             = 1,
 234        BID_SIL3131             = 2,
 235
 236        /* host flags */
 237        SIL24_COMMON_FLAGS      = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
 238                                  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
 239                                  ATA_FLAG_AN | ATA_FLAG_PMP,
 240        SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
 241
 242        IRQ_STAT_4PORTS         = 0xf,
 243};
 244
 245struct sil24_ata_block {
 246        struct sil24_prb prb;
 247        struct sil24_sge sge[SIL24_MAX_SGE];
 248};
 249
 250struct sil24_atapi_block {
 251        struct sil24_prb prb;
 252        u8 cdb[16];
 253        struct sil24_sge sge[SIL24_MAX_SGE];
 254};
 255
 256union sil24_cmd_block {
 257        struct sil24_ata_block ata;
 258        struct sil24_atapi_block atapi;
 259};
 260
 261static const struct sil24_cerr_info {
 262        unsigned int err_mask, action;
 263        const char *desc;
 264} sil24_cerr_db[] = {
 265        [0]                     = { AC_ERR_DEV, 0,
 266                                    "device error" },
 267        [PORT_CERR_DEV]         = { AC_ERR_DEV, 0,
 268                                    "device error via D2H FIS" },
 269        [PORT_CERR_SDB]         = { AC_ERR_DEV, 0,
 270                                    "device error via SDB FIS" },
 271        [PORT_CERR_DATA]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 272                                    "error in data FIS" },
 273        [PORT_CERR_SEND]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 274                                    "failed to transmit command FIS" },
 275        [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
 276                                     "protocol mismatch" },
 277        [PORT_CERR_DIRECTION]   = { AC_ERR_HSM, ATA_EH_RESET,
 278                                    "data direction mismatch" },
 279        [PORT_CERR_UNDERRUN]    = { AC_ERR_HSM, ATA_EH_RESET,
 280                                    "ran out of SGEs while writing" },
 281        [PORT_CERR_OVERRUN]     = { AC_ERR_HSM, ATA_EH_RESET,
 282                                    "ran out of SGEs while reading" },
 283        [PORT_CERR_PKT_PROT]    = { AC_ERR_HSM, ATA_EH_RESET,
 284                                    "invalid data direction for ATAPI CDB" },
 285        [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 286                                     "SGT not on qword boundary" },
 287        [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 288                                    "PCI target abort while fetching SGT" },
 289        [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 290                                    "PCI master abort while fetching SGT" },
 291        [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 292                                    "PCI parity error while fetching SGT" },
 293        [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 294                                     "PRB not on qword boundary" },
 295        [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 296                                    "PCI target abort while fetching PRB" },
 297        [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 298                                    "PCI master abort while fetching PRB" },
 299        [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 300                                    "PCI parity error while fetching PRB" },
 301        [PORT_CERR_XFR_UNDEF]   = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 302                                    "undefined error while transferring data" },
 303        [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 304                                    "PCI target abort while transferring data" },
 305        [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 306                                    "PCI master abort while transferring data" },
 307        [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 308                                    "PCI parity error while transferring data" },
 309        [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
 310                                    "FIS received while sending service FIS" },
 311};
 312
 313/*
 314 * ap->private_data
 315 *
 316 * The preview driver always returned 0 for status.  We emulate it
 317 * here from the previous interrupt.
 318 */
 319struct sil24_port_priv {
 320        union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
 321        dma_addr_t cmd_block_dma;               /* DMA base addr for them */
 322        int do_port_rst;
 323};
 324
 325static void sil24_dev_config(struct ata_device *dev);
 326static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
 327static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
 328static int sil24_qc_defer(struct ata_queued_cmd *qc);
 329static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc);
 330static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 331static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
 332static void sil24_pmp_attach(struct ata_port *ap);
 333static void sil24_pmp_detach(struct ata_port *ap);
 334static void sil24_freeze(struct ata_port *ap);
 335static void sil24_thaw(struct ata_port *ap);
 336static int sil24_softreset(struct ata_link *link, unsigned int *class,
 337                           unsigned long deadline);
 338static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 339                           unsigned long deadline);
 340static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 341                               unsigned long deadline);
 342static void sil24_error_handler(struct ata_port *ap);
 343static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
 344static int sil24_port_start(struct ata_port *ap);
 345static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 346#ifdef CONFIG_PM_SLEEP
 347static int sil24_pci_device_resume(struct pci_dev *pdev);
 348#endif
 349#ifdef CONFIG_PM
 350static int sil24_port_resume(struct ata_port *ap);
 351#endif
 352
 353static const struct pci_device_id sil24_pci_tbl[] = {
 354        { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
 355        { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
 356        { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
 357        { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
 358        { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
 359        { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
 360        { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
 361
 362        { } /* terminate list */
 363};
 364
 365static struct pci_driver sil24_pci_driver = {
 366        .name                   = DRV_NAME,
 367        .id_table               = sil24_pci_tbl,
 368        .probe                  = sil24_init_one,
 369        .remove                 = ata_pci_remove_one,
 370#ifdef CONFIG_PM_SLEEP
 371        .suspend                = ata_pci_device_suspend,
 372        .resume                 = sil24_pci_device_resume,
 373#endif
 374};
 375
 376static struct scsi_host_template sil24_sht = {
 377        ATA_NCQ_SHT(DRV_NAME),
 378        .can_queue              = SIL24_MAX_CMDS,
 379        .sg_tablesize           = SIL24_MAX_SGE,
 380        .dma_boundary           = ATA_DMA_BOUNDARY,
 381        .tag_alloc_policy       = BLK_TAG_ALLOC_FIFO,
 382};
 383
 384static struct ata_port_operations sil24_ops = {
 385        .inherits               = &sata_pmp_port_ops,
 386
 387        .qc_defer               = sil24_qc_defer,
 388        .qc_prep                = sil24_qc_prep,
 389        .qc_issue               = sil24_qc_issue,
 390        .qc_fill_rtf            = sil24_qc_fill_rtf,
 391
 392        .freeze                 = sil24_freeze,
 393        .thaw                   = sil24_thaw,
 394        .softreset              = sil24_softreset,
 395        .hardreset              = sil24_hardreset,
 396        .pmp_softreset          = sil24_softreset,
 397        .pmp_hardreset          = sil24_pmp_hardreset,
 398        .error_handler          = sil24_error_handler,
 399        .post_internal_cmd      = sil24_post_internal_cmd,
 400        .dev_config             = sil24_dev_config,
 401
 402        .scr_read               = sil24_scr_read,
 403        .scr_write              = sil24_scr_write,
 404        .pmp_attach             = sil24_pmp_attach,
 405        .pmp_detach             = sil24_pmp_detach,
 406
 407        .port_start             = sil24_port_start,
 408#ifdef CONFIG_PM
 409        .port_resume            = sil24_port_resume,
 410#endif
 411};
 412
 413static bool sata_sil24_msi;    /* Disable MSI */
 414module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
 415MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
 416
 417/*
 418 * Use bits 30-31 of port_flags to encode available port numbers.
 419 * Current maxium is 4.
 420 */
 421#define SIL24_NPORTS2FLAG(nports)       ((((unsigned)(nports) - 1) & 0x3) << 30)
 422#define SIL24_FLAG2NPORTS(flag)         ((((flag) >> 30) & 0x3) + 1)
 423
 424static const struct ata_port_info sil24_port_info[] = {
 425        /* sil_3124 */
 426        {
 427                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 428                                  SIL24_FLAG_PCIX_IRQ_WOC,
 429                .pio_mask       = ATA_PIO4,
 430                .mwdma_mask     = ATA_MWDMA2,
 431                .udma_mask      = ATA_UDMA5,
 432                .port_ops       = &sil24_ops,
 433        },
 434        /* sil_3132 */
 435        {
 436                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 437                .pio_mask       = ATA_PIO4,
 438                .mwdma_mask     = ATA_MWDMA2,
 439                .udma_mask      = ATA_UDMA5,
 440                .port_ops       = &sil24_ops,
 441        },
 442        /* sil_3131/sil_3531 */
 443        {
 444                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 445                .pio_mask       = ATA_PIO4,
 446                .mwdma_mask     = ATA_MWDMA2,
 447                .udma_mask      = ATA_UDMA5,
 448                .port_ops       = &sil24_ops,
 449        },
 450};
 451
 452static int sil24_tag(int tag)
 453{
 454        if (unlikely(ata_tag_internal(tag)))
 455                return 0;
 456        return tag;
 457}
 458
 459static unsigned long sil24_port_offset(struct ata_port *ap)
 460{
 461        return ap->port_no * PORT_REGS_SIZE;
 462}
 463
 464static void __iomem *sil24_port_base(struct ata_port *ap)
 465{
 466        return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
 467}
 468
 469static void sil24_dev_config(struct ata_device *dev)
 470{
 471        void __iomem *port = sil24_port_base(dev->link->ap);
 472
 473        if (dev->cdb_len == 16)
 474                writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
 475        else
 476                writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
 477}
 478
 479static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
 480{
 481        void __iomem *port = sil24_port_base(ap);
 482        struct sil24_prb __iomem *prb;
 483        u8 fis[6 * 4];
 484
 485        prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
 486        memcpy_fromio(fis, prb->fis, sizeof(fis));
 487        ata_tf_from_fis(fis, tf);
 488}
 489
 490static int sil24_scr_map[] = {
 491        [SCR_CONTROL]   = 0,
 492        [SCR_STATUS]    = 1,
 493        [SCR_ERROR]     = 2,
 494        [SCR_ACTIVE]    = 3,
 495};
 496
 497static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
 498{
 499        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 500
 501        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 502                *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
 503                return 0;
 504        }
 505        return -EINVAL;
 506}
 507
 508static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
 509{
 510        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 511
 512        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 513                writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
 514                return 0;
 515        }
 516        return -EINVAL;
 517}
 518
 519static void sil24_config_port(struct ata_port *ap)
 520{
 521        void __iomem *port = sil24_port_base(ap);
 522
 523        /* configure IRQ WoC */
 524        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
 525                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
 526        else
 527                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
 528
 529        /* zero error counters. */
 530        writew(0x8000, port + PORT_DECODE_ERR_THRESH);
 531        writew(0x8000, port + PORT_CRC_ERR_THRESH);
 532        writew(0x8000, port + PORT_HSHK_ERR_THRESH);
 533        writew(0x0000, port + PORT_DECODE_ERR_CNT);
 534        writew(0x0000, port + PORT_CRC_ERR_CNT);
 535        writew(0x0000, port + PORT_HSHK_ERR_CNT);
 536
 537        /* always use 64bit activation */
 538        writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 539
 540        /* clear port multiplier enable and resume bits */
 541        writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 542}
 543
 544static void sil24_config_pmp(struct ata_port *ap, int attached)
 545{
 546        void __iomem *port = sil24_port_base(ap);
 547
 548        if (attached)
 549                writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
 550        else
 551                writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
 552}
 553
 554static void sil24_clear_pmp(struct ata_port *ap)
 555{
 556        void __iomem *port = sil24_port_base(ap);
 557        int i;
 558
 559        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 560
 561        for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
 562                void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
 563
 564                writel(0, pmp_base + PORT_PMP_STATUS);
 565                writel(0, pmp_base + PORT_PMP_QACTIVE);
 566        }
 567}
 568
 569static int sil24_init_port(struct ata_port *ap)
 570{
 571        void __iomem *port = sil24_port_base(ap);
 572        struct sil24_port_priv *pp = ap->private_data;
 573        u32 tmp;
 574
 575        /* clear PMP error status */
 576        if (sata_pmp_attached(ap))
 577                sil24_clear_pmp(ap);
 578
 579        writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
 580        ata_wait_register(ap, port + PORT_CTRL_STAT,
 581                          PORT_CS_INIT, PORT_CS_INIT, 10, 100);
 582        tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
 583                                PORT_CS_RDY, 0, 10, 100);
 584
 585        if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
 586                pp->do_port_rst = 1;
 587                ap->link.eh_context.i.action |= ATA_EH_RESET;
 588                return -EIO;
 589        }
 590
 591        return 0;
 592}
 593
 594static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 595                                 const struct ata_taskfile *tf,
 596                                 int is_cmd, u32 ctrl,
 597                                 unsigned long timeout_msec)
 598{
 599        void __iomem *port = sil24_port_base(ap);
 600        struct sil24_port_priv *pp = ap->private_data;
 601        struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
 602        dma_addr_t paddr = pp->cmd_block_dma;
 603        u32 irq_enabled, irq_mask, irq_stat;
 604        int rc;
 605
 606        prb->ctrl = cpu_to_le16(ctrl);
 607        ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
 608
 609        /* temporarily plug completion and error interrupts */
 610        irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
 611        writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
 612
 613        /*
 614         * The barrier is required to ensure that writes to cmd_block reach
 615         * the memory before the write to PORT_CMD_ACTIVATE.
 616         */
 617        wmb();
 618        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 619        writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 620
 621        irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
 622        irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0,
 623                                     10, timeout_msec);
 624
 625        writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
 626        irq_stat >>= PORT_IRQ_RAW_SHIFT;
 627
 628        if (irq_stat & PORT_IRQ_COMPLETE)
 629                rc = 0;
 630        else {
 631                /* force port into known state */
 632                sil24_init_port(ap);
 633
 634                if (irq_stat & PORT_IRQ_ERROR)
 635                        rc = -EIO;
 636                else
 637                        rc = -EBUSY;
 638        }
 639
 640        /* restore IRQ enabled */
 641        writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
 642
 643        return rc;
 644}
 645
 646static int sil24_softreset(struct ata_link *link, unsigned int *class,
 647                           unsigned long deadline)
 648{
 649        struct ata_port *ap = link->ap;
 650        int pmp = sata_srst_pmp(link);
 651        unsigned long timeout_msec = 0;
 652        struct ata_taskfile tf;
 653        const char *reason;
 654        int rc;
 655
 656        DPRINTK("ENTER\n");
 657
 658        /* put the port into known state */
 659        if (sil24_init_port(ap)) {
 660                reason = "port not ready";
 661                goto err;
 662        }
 663
 664        /* do SRST */
 665        if (time_after(deadline, jiffies))
 666                timeout_msec = jiffies_to_msecs(deadline - jiffies);
 667
 668        ata_tf_init(link->device, &tf); /* doesn't really matter */
 669        rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
 670                                   timeout_msec);
 671        if (rc == -EBUSY) {
 672                reason = "timeout";
 673                goto err;
 674        } else if (rc) {
 675                reason = "SRST command error";
 676                goto err;
 677        }
 678
 679        sil24_read_tf(ap, 0, &tf);
 680        *class = ata_dev_classify(&tf);
 681
 682        DPRINTK("EXIT, class=%u\n", *class);
 683        return 0;
 684
 685 err:
 686        ata_link_err(link, "softreset failed (%s)\n", reason);
 687        return -EIO;
 688}
 689
 690static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 691                           unsigned long deadline)
 692{
 693        struct ata_port *ap = link->ap;
 694        void __iomem *port = sil24_port_base(ap);
 695        struct sil24_port_priv *pp = ap->private_data;
 696        int did_port_rst = 0;
 697        const char *reason;
 698        int tout_msec, rc;
 699        u32 tmp;
 700
 701 retry:
 702        /* Sometimes, DEV_RST is not enough to recover the controller.
 703         * This happens often after PM DMA CS errata.
 704         */
 705        if (pp->do_port_rst) {
 706                ata_port_warn(ap,
 707                              "controller in dubious state, performing PORT_RST\n");
 708
 709                writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
 710                ata_msleep(ap, 10);
 711                writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
 712                ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
 713                                  10, 5000);
 714
 715                /* restore port configuration */
 716                sil24_config_port(ap);
 717                sil24_config_pmp(ap, ap->nr_pmp_links);
 718
 719                pp->do_port_rst = 0;
 720                did_port_rst = 1;
 721        }
 722
 723        /* sil24 does the right thing(tm) without any protection */
 724        sata_set_spd(link);
 725
 726        tout_msec = 100;
 727        if (ata_link_online(link))
 728                tout_msec = 5000;
 729
 730        writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
 731        tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
 732                                PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
 733                                tout_msec);
 734
 735        /* SStatus oscillates between zero and valid status after
 736         * DEV_RST, debounce it.
 737         */
 738        rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
 739        if (rc) {
 740                reason = "PHY debouncing failed";
 741                goto err;
 742        }
 743
 744        if (tmp & PORT_CS_DEV_RST) {
 745                if (ata_link_offline(link))
 746                        return 0;
 747                reason = "link not ready";
 748                goto err;
 749        }
 750
 751        /* Sil24 doesn't store signature FIS after hardreset, so we
 752         * can't wait for BSY to clear.  Some devices take a long time
 753         * to get ready and those devices will choke if we don't wait
 754         * for BSY clearance here.  Tell libata to perform follow-up
 755         * softreset.
 756         */
 757        return -EAGAIN;
 758
 759 err:
 760        if (!did_port_rst) {
 761                pp->do_port_rst = 1;
 762                goto retry;
 763        }
 764
 765        ata_link_err(link, "hardreset failed (%s)\n", reason);
 766        return -EIO;
 767}
 768
 769static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
 770                                 struct sil24_sge *sge)
 771{
 772        struct scatterlist *sg;
 773        struct sil24_sge *last_sge = NULL;
 774        unsigned int si;
 775
 776        for_each_sg(qc->sg, sg, qc->n_elem, si) {
 777                sge->addr = cpu_to_le64(sg_dma_address(sg));
 778                sge->cnt = cpu_to_le32(sg_dma_len(sg));
 779                sge->flags = 0;
 780
 781                last_sge = sge;
 782                sge++;
 783        }
 784
 785        last_sge->flags = cpu_to_le32(SGE_TRM);
 786}
 787
 788static int sil24_qc_defer(struct ata_queued_cmd *qc)
 789{
 790        struct ata_link *link = qc->dev->link;
 791        struct ata_port *ap = link->ap;
 792        u8 prot = qc->tf.protocol;
 793
 794        /*
 795         * There is a bug in the chip:
 796         * Port LRAM Causes the PRB/SGT Data to be Corrupted
 797         * If the host issues a read request for LRAM and SActive registers
 798         * while active commands are available in the port, PRB/SGT data in
 799         * the LRAM can become corrupted. This issue applies only when
 800         * reading from, but not writing to, the LRAM.
 801         *
 802         * Therefore, reading LRAM when there is no particular error [and
 803         * other commands may be outstanding] is prohibited.
 804         *
 805         * To avoid this bug there are two situations where a command must run
 806         * exclusive of any other commands on the port:
 807         *
 808         * - ATAPI commands which check the sense data
 809         * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
 810         *   set.
 811         *
 812         */
 813        int is_excl = (ata_is_atapi(prot) ||
 814                       (qc->flags & ATA_QCFLAG_RESULT_TF));
 815
 816        if (unlikely(ap->excl_link)) {
 817                if (link == ap->excl_link) {
 818                        if (ap->nr_active_links)
 819                                return ATA_DEFER_PORT;
 820                        qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 821                } else
 822                        return ATA_DEFER_PORT;
 823        } else if (unlikely(is_excl)) {
 824                ap->excl_link = link;
 825                if (ap->nr_active_links)
 826                        return ATA_DEFER_PORT;
 827                qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 828        }
 829
 830        return ata_std_qc_defer(qc);
 831}
 832
 833static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc)
 834{
 835        struct ata_port *ap = qc->ap;
 836        struct sil24_port_priv *pp = ap->private_data;
 837        union sil24_cmd_block *cb;
 838        struct sil24_prb *prb;
 839        struct sil24_sge *sge;
 840        u16 ctrl = 0;
 841
 842        cb = &pp->cmd_block[sil24_tag(qc->hw_tag)];
 843
 844        if (!ata_is_atapi(qc->tf.protocol)) {
 845                prb = &cb->ata.prb;
 846                sge = cb->ata.sge;
 847                if (ata_is_data(qc->tf.protocol)) {
 848                        u16 prot = 0;
 849                        ctrl = PRB_CTRL_PROTOCOL;
 850                        if (ata_is_ncq(qc->tf.protocol))
 851                                prot |= PRB_PROT_NCQ;
 852                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 853                                prot |= PRB_PROT_WRITE;
 854                        else
 855                                prot |= PRB_PROT_READ;
 856                        prb->prot = cpu_to_le16(prot);
 857                }
 858        } else {
 859                prb = &cb->atapi.prb;
 860                sge = cb->atapi.sge;
 861                memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
 862                memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
 863
 864                if (ata_is_data(qc->tf.protocol)) {
 865                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 866                                ctrl = PRB_CTRL_PACKET_WRITE;
 867                        else
 868                                ctrl = PRB_CTRL_PACKET_READ;
 869                }
 870        }
 871
 872        prb->ctrl = cpu_to_le16(ctrl);
 873        ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
 874
 875        if (qc->flags & ATA_QCFLAG_DMAMAP)
 876                sil24_fill_sg(qc, sge);
 877
 878        return AC_ERR_OK;
 879}
 880
 881static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 882{
 883        struct ata_port *ap = qc->ap;
 884        struct sil24_port_priv *pp = ap->private_data;
 885        void __iomem *port = sil24_port_base(ap);
 886        unsigned int tag = sil24_tag(qc->hw_tag);
 887        dma_addr_t paddr;
 888        void __iomem *activate;
 889
 890        paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
 891        activate = port + PORT_CMD_ACTIVATE + tag * 8;
 892
 893        /*
 894         * The barrier is required to ensure that writes to cmd_block reach
 895         * the memory before the write to PORT_CMD_ACTIVATE.
 896         */
 897        wmb();
 898        writel((u32)paddr, activate);
 899        writel((u64)paddr >> 32, activate + 4);
 900
 901        return 0;
 902}
 903
 904static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
 905{
 906        sil24_read_tf(qc->ap, qc->hw_tag, &qc->result_tf);
 907        return true;
 908}
 909
 910static void sil24_pmp_attach(struct ata_port *ap)
 911{
 912        u32 *gscr = ap->link.device->gscr;
 913
 914        sil24_config_pmp(ap, 1);
 915        sil24_init_port(ap);
 916
 917        if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
 918            sata_pmp_gscr_devid(gscr) == 0x4140) {
 919                ata_port_info(ap,
 920                        "disabling NCQ support due to sil24-mv4140 quirk\n");
 921                ap->flags &= ~ATA_FLAG_NCQ;
 922        }
 923}
 924
 925static void sil24_pmp_detach(struct ata_port *ap)
 926{
 927        sil24_init_port(ap);
 928        sil24_config_pmp(ap, 0);
 929
 930        ap->flags |= ATA_FLAG_NCQ;
 931}
 932
 933static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 934                               unsigned long deadline)
 935{
 936        int rc;
 937
 938        rc = sil24_init_port(link->ap);
 939        if (rc) {
 940                ata_link_err(link, "hardreset failed (port not ready)\n");
 941                return rc;
 942        }
 943
 944        return sata_std_hardreset(link, class, deadline);
 945}
 946
 947static void sil24_freeze(struct ata_port *ap)
 948{
 949        void __iomem *port = sil24_port_base(ap);
 950
 951        /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
 952         * PORT_IRQ_ENABLE instead.
 953         */
 954        writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
 955}
 956
 957static void sil24_thaw(struct ata_port *ap)
 958{
 959        void __iomem *port = sil24_port_base(ap);
 960        u32 tmp;
 961
 962        /* clear IRQ */
 963        tmp = readl(port + PORT_IRQ_STAT);
 964        writel(tmp, port + PORT_IRQ_STAT);
 965
 966        /* turn IRQ back on */
 967        writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
 968}
 969
 970static void sil24_error_intr(struct ata_port *ap)
 971{
 972        void __iomem *port = sil24_port_base(ap);
 973        struct sil24_port_priv *pp = ap->private_data;
 974        struct ata_queued_cmd *qc = NULL;
 975        struct ata_link *link;
 976        struct ata_eh_info *ehi;
 977        int abort = 0, freeze = 0;
 978        u32 irq_stat;
 979
 980        /* on error, we need to clear IRQ explicitly */
 981        irq_stat = readl(port + PORT_IRQ_STAT);
 982        writel(irq_stat, port + PORT_IRQ_STAT);
 983
 984        /* first, analyze and record host port events */
 985        link = &ap->link;
 986        ehi = &link->eh_info;
 987        ata_ehi_clear_desc(ehi);
 988
 989        ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
 990
 991        if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
 992                ata_ehi_push_desc(ehi, "SDB notify");
 993                sata_async_notification(ap);
 994        }
 995
 996        if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
 997                ata_ehi_hotplugged(ehi);
 998                ata_ehi_push_desc(ehi, "%s",
 999                                  irq_stat & PORT_IRQ_PHYRDY_CHG ?
1000                                  "PHY RDY changed" : "device exchanged");
1001                freeze = 1;
1002        }
1003
1004        if (irq_stat & PORT_IRQ_UNK_FIS) {
1005                ehi->err_mask |= AC_ERR_HSM;
1006                ehi->action |= ATA_EH_RESET;
1007                ata_ehi_push_desc(ehi, "unknown FIS");
1008                freeze = 1;
1009        }
1010
1011        /* deal with command error */
1012        if (irq_stat & PORT_IRQ_ERROR) {
1013                const struct sil24_cerr_info *ci = NULL;
1014                unsigned int err_mask = 0, action = 0;
1015                u32 context, cerr;
1016                int pmp;
1017
1018                abort = 1;
1019
1020                /* DMA Context Switch Failure in Port Multiplier Mode
1021                 * errata.  If we have active commands to 3 or more
1022                 * devices, any error condition on active devices can
1023                 * corrupt DMA context switching.
1024                 */
1025                if (ap->nr_active_links >= 3) {
1026                        ehi->err_mask |= AC_ERR_OTHER;
1027                        ehi->action |= ATA_EH_RESET;
1028                        ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1029                        pp->do_port_rst = 1;
1030                        freeze = 1;
1031                }
1032
1033                /* find out the offending link and qc */
1034                if (sata_pmp_attached(ap)) {
1035                        context = readl(port + PORT_CONTEXT);
1036                        pmp = (context >> 5) & 0xf;
1037
1038                        if (pmp < ap->nr_pmp_links) {
1039                                link = &ap->pmp_link[pmp];
1040                                ehi = &link->eh_info;
1041                                qc = ata_qc_from_tag(ap, link->active_tag);
1042
1043                                ata_ehi_clear_desc(ehi);
1044                                ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1045                                                  irq_stat);
1046                        } else {
1047                                err_mask |= AC_ERR_HSM;
1048                                action |= ATA_EH_RESET;
1049                                freeze = 1;
1050                        }
1051                } else
1052                        qc = ata_qc_from_tag(ap, link->active_tag);
1053
1054                /* analyze CMD_ERR */
1055                cerr = readl(port + PORT_CMD_ERR);
1056                if (cerr < ARRAY_SIZE(sil24_cerr_db))
1057                        ci = &sil24_cerr_db[cerr];
1058
1059                if (ci && ci->desc) {
1060                        err_mask |= ci->err_mask;
1061                        action |= ci->action;
1062                        if (action & ATA_EH_RESET)
1063                                freeze = 1;
1064                        ata_ehi_push_desc(ehi, "%s", ci->desc);
1065                } else {
1066                        err_mask |= AC_ERR_OTHER;
1067                        action |= ATA_EH_RESET;
1068                        freeze = 1;
1069                        ata_ehi_push_desc(ehi, "unknown command error %d",
1070                                          cerr);
1071                }
1072
1073                /* record error info */
1074                if (qc)
1075                        qc->err_mask |= err_mask;
1076                else
1077                        ehi->err_mask |= err_mask;
1078
1079                ehi->action |= action;
1080
1081                /* if PMP, resume */
1082                if (sata_pmp_attached(ap))
1083                        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1084        }
1085
1086        /* freeze or abort */
1087        if (freeze)
1088                ata_port_freeze(ap);
1089        else if (abort) {
1090                if (qc)
1091                        ata_link_abort(qc->dev->link);
1092                else
1093                        ata_port_abort(ap);
1094        }
1095}
1096
1097static inline void sil24_host_intr(struct ata_port *ap)
1098{
1099        void __iomem *port = sil24_port_base(ap);
1100        u32 slot_stat, qc_active;
1101        int rc;
1102
1103        /* If PCIX_IRQ_WOC, there's an inherent race window between
1104         * clearing IRQ pending status and reading PORT_SLOT_STAT
1105         * which may cause spurious interrupts afterwards.  This is
1106         * unavoidable and much better than losing interrupts which
1107         * happens if IRQ pending is cleared after reading
1108         * PORT_SLOT_STAT.
1109         */
1110        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1111                writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1112
1113        slot_stat = readl(port + PORT_SLOT_STAT);
1114
1115        if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1116                sil24_error_intr(ap);
1117                return;
1118        }
1119
1120        qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1121        rc = ata_qc_complete_multiple(ap, qc_active);
1122        if (rc > 0)
1123                return;
1124        if (rc < 0) {
1125                struct ata_eh_info *ehi = &ap->link.eh_info;
1126                ehi->err_mask |= AC_ERR_HSM;
1127                ehi->action |= ATA_EH_RESET;
1128                ata_port_freeze(ap);
1129                return;
1130        }
1131
1132        /* spurious interrupts are expected if PCIX_IRQ_WOC */
1133        if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1134                ata_port_info(ap,
1135                        "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1136                        slot_stat, ap->link.active_tag, ap->link.sactive);
1137}
1138
1139static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1140{
1141        struct ata_host *host = dev_instance;
1142        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1143        unsigned handled = 0;
1144        u32 status;
1145        int i;
1146
1147        status = readl(host_base + HOST_IRQ_STAT);
1148
1149        if (status == 0xffffffff) {
1150                dev_err(host->dev, "IRQ status == 0xffffffff, "
1151                        "PCI fault or device removal?\n");
1152                goto out;
1153        }
1154
1155        if (!(status & IRQ_STAT_4PORTS))
1156                goto out;
1157
1158        spin_lock(&host->lock);
1159
1160        for (i = 0; i < host->n_ports; i++)
1161                if (status & (1 << i)) {
1162                        sil24_host_intr(host->ports[i]);
1163                        handled++;
1164                }
1165
1166        spin_unlock(&host->lock);
1167 out:
1168        return IRQ_RETVAL(handled);
1169}
1170
1171static void sil24_error_handler(struct ata_port *ap)
1172{
1173        struct sil24_port_priv *pp = ap->private_data;
1174
1175        if (sil24_init_port(ap))
1176                ata_eh_freeze_port(ap);
1177
1178        sata_pmp_error_handler(ap);
1179
1180        pp->do_port_rst = 0;
1181}
1182
1183static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1184{
1185        struct ata_port *ap = qc->ap;
1186
1187        /* make DMA engine forget about the failed command */
1188        if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1189                ata_eh_freeze_port(ap);
1190}
1191
1192static int sil24_port_start(struct ata_port *ap)
1193{
1194        struct device *dev = ap->host->dev;
1195        struct sil24_port_priv *pp;
1196        union sil24_cmd_block *cb;
1197        size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1198        dma_addr_t cb_dma;
1199
1200        pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1201        if (!pp)
1202                return -ENOMEM;
1203
1204        cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1205        if (!cb)
1206                return -ENOMEM;
1207
1208        pp->cmd_block = cb;
1209        pp->cmd_block_dma = cb_dma;
1210
1211        ap->private_data = pp;
1212
1213        ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1214        ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1215
1216        return 0;
1217}
1218
1219static void sil24_init_controller(struct ata_host *host)
1220{
1221        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1222        u32 tmp;
1223        int i;
1224
1225        /* GPIO off */
1226        writel(0, host_base + HOST_FLASH_CMD);
1227
1228        /* clear global reset & mask interrupts during initialization */
1229        writel(0, host_base + HOST_CTRL);
1230
1231        /* init ports */
1232        for (i = 0; i < host->n_ports; i++) {
1233                struct ata_port *ap = host->ports[i];
1234                void __iomem *port = sil24_port_base(ap);
1235
1236
1237                /* Initial PHY setting */
1238                writel(0x20c, port + PORT_PHY_CFG);
1239
1240                /* Clear port RST */
1241                tmp = readl(port + PORT_CTRL_STAT);
1242                if (tmp & PORT_CS_PORT_RST) {
1243                        writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1244                        tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT,
1245                                                PORT_CS_PORT_RST,
1246                                                PORT_CS_PORT_RST, 10, 100);
1247                        if (tmp & PORT_CS_PORT_RST)
1248                                dev_err(host->dev,
1249                                        "failed to clear port RST\n");
1250                }
1251
1252                /* configure port */
1253                sil24_config_port(ap);
1254        }
1255
1256        /* Turn on interrupts */
1257        writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1258}
1259
1260static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1261{
1262        extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1263        struct ata_port_info pi = sil24_port_info[ent->driver_data];
1264        const struct ata_port_info *ppi[] = { &pi, NULL };
1265        void __iomem * const *iomap;
1266        struct ata_host *host;
1267        int rc;
1268        u32 tmp;
1269
1270        /* cause link error if sil24_cmd_block is sized wrongly */
1271        if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1272                __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1273
1274        ata_print_version_once(&pdev->dev, DRV_VERSION);
1275
1276        /* acquire resources */
1277        rc = pcim_enable_device(pdev);
1278        if (rc)
1279                return rc;
1280
1281        rc = pcim_iomap_regions(pdev,
1282                                (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1283                                DRV_NAME);
1284        if (rc)
1285                return rc;
1286        iomap = pcim_iomap_table(pdev);
1287
1288        /* apply workaround for completion IRQ loss on PCI-X errata */
1289        if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1290                tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1291                if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1292                        dev_info(&pdev->dev,
1293                                 "Applying completion IRQ loss on PCI-X errata fix\n");
1294                else
1295                        pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1296        }
1297
1298        /* allocate and fill host */
1299        host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1300                                    SIL24_FLAG2NPORTS(ppi[0]->flags));
1301        if (!host)
1302                return -ENOMEM;
1303        host->iomap = iomap;
1304
1305        /* configure and activate the device */
1306        rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
1307        if (rc) {
1308                dev_err(&pdev->dev, "DMA enable failed\n");
1309                return rc;
1310        }
1311
1312        /* Set max read request size to 4096.  This slightly increases
1313         * write throughput for pci-e variants.
1314         */
1315        pcie_set_readrq(pdev, 4096);
1316
1317        sil24_init_controller(host);
1318
1319        if (sata_sil24_msi && !pci_enable_msi(pdev)) {
1320                dev_info(&pdev->dev, "Using MSI\n");
1321                pci_intx(pdev, 0);
1322        }
1323
1324        pci_set_master(pdev);
1325        return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1326                                 &sil24_sht);
1327}
1328
1329#ifdef CONFIG_PM_SLEEP
1330static int sil24_pci_device_resume(struct pci_dev *pdev)
1331{
1332        struct ata_host *host = pci_get_drvdata(pdev);
1333        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1334        int rc;
1335
1336        rc = ata_pci_device_do_resume(pdev);
1337        if (rc)
1338                return rc;
1339
1340        if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1341                writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1342
1343        sil24_init_controller(host);
1344
1345        ata_host_resume(host);
1346
1347        return 0;
1348}
1349#endif
1350
1351#ifdef CONFIG_PM
1352static int sil24_port_resume(struct ata_port *ap)
1353{
1354        sil24_config_pmp(ap, ap->nr_pmp_links);
1355        return 0;
1356}
1357#endif
1358
1359module_pci_driver(sil24_pci_driver);
1360
1361MODULE_AUTHOR("Tejun Heo");
1362MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1363MODULE_LICENSE("GPL");
1364MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1365