linux/drivers/atm/solos-pci.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
   4 *  Traverse Technologies -- https://www.traverse.com.au/
   5 *  Xrio Limited          -- http://www.xrio.com/
   6 *
   7 * Copyright © 2008 Traverse Technologies
   8 * Copyright © 2008 Intel Corporation
   9 *
  10 * Authors: Nathan Williams <nathan@traverse.com.au>
  11 *          David Woodhouse <dwmw2@infradead.org>
  12 *          Treker Chen <treker@xrio.com>
  13 */
  14
  15#define DEBUG
  16#define VERBOSE_DEBUG
  17
  18#include <linux/interrupt.h>
  19#include <linux/module.h>
  20#include <linux/kernel.h>
  21#include <linux/errno.h>
  22#include <linux/ioport.h>
  23#include <linux/types.h>
  24#include <linux/pci.h>
  25#include <linux/atm.h>
  26#include <linux/atmdev.h>
  27#include <linux/skbuff.h>
  28#include <linux/sysfs.h>
  29#include <linux/device.h>
  30#include <linux/kobject.h>
  31#include <linux/firmware.h>
  32#include <linux/ctype.h>
  33#include <linux/swab.h>
  34#include <linux/slab.h>
  35
  36#define VERSION "1.04"
  37#define DRIVER_VERSION 0x01
  38#define PTAG "solos-pci"
  39
  40#define CONFIG_RAM_SIZE 128
  41#define FLAGS_ADDR      0x7C
  42#define IRQ_EN_ADDR     0x78
  43#define FPGA_VER        0x74
  44#define IRQ_CLEAR       0x70
  45#define WRITE_FLASH     0x6C
  46#define PORTS           0x68
  47#define FLASH_BLOCK     0x64
  48#define FLASH_BUSY      0x60
  49#define FPGA_MODE       0x5C
  50#define FLASH_MODE      0x58
  51#define GPIO_STATUS     0x54
  52#define DRIVER_VER      0x50
  53#define TX_DMA_ADDR(port)       (0x40 + (4 * (port)))
  54#define RX_DMA_ADDR(port)       (0x30 + (4 * (port)))
  55
  56#define DATA_RAM_SIZE   32768
  57#define BUF_SIZE        2048
  58#define OLD_BUF_SIZE    4096 /* For FPGA versions <= 2*/
  59/* Old boards use ATMEL AD45DB161D flash */
  60#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
  61#define ATMEL_SOLOS_PAGE        512 /* Solos flash page size*/
  62#define ATMEL_FPGA_BLOCK        (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
  63#define ATMEL_SOLOS_BLOCK       (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
  64/* Current boards use M25P/M25PE SPI flash */
  65#define SPI_FLASH_BLOCK (256 * 64)
  66
  67#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
  68#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
  69#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
  70
  71#define RX_DMA_SIZE     2048
  72
  73#define FPGA_VERSION(a,b) (((a) << 8) + (b))
  74#define LEGACY_BUFFERS  2
  75#define DMA_SUPPORTED   4
  76
  77static int reset = 0;
  78static int atmdebug = 0;
  79static int firmware_upgrade = 0;
  80static int fpga_upgrade = 0;
  81static int db_firmware_upgrade = 0;
  82static int db_fpga_upgrade = 0;
  83
  84struct pkt_hdr {
  85        __le16 size;
  86        __le16 vpi;
  87        __le16 vci;
  88        __le16 type;
  89};
  90
  91struct solos_skb_cb {
  92        struct atm_vcc *vcc;
  93        uint32_t dma_addr;
  94};
  95
  96
  97#define SKB_CB(skb)             ((struct solos_skb_cb *)skb->cb)
  98
  99#define PKT_DATA        0
 100#define PKT_COMMAND     1
 101#define PKT_POPEN       3
 102#define PKT_PCLOSE      4
 103#define PKT_STATUS      5
 104
 105struct solos_card {
 106        void __iomem *config_regs;
 107        void __iomem *buffers;
 108        int nr_ports;
 109        int tx_mask;
 110        struct pci_dev *dev;
 111        struct atm_dev *atmdev[4];
 112        struct tasklet_struct tlet;
 113        spinlock_t tx_lock;
 114        spinlock_t tx_queue_lock;
 115        spinlock_t cli_queue_lock;
 116        spinlock_t param_queue_lock;
 117        struct list_head param_queue;
 118        struct sk_buff_head tx_queue[4];
 119        struct sk_buff_head cli_queue[4];
 120        struct sk_buff *tx_skb[4];
 121        struct sk_buff *rx_skb[4];
 122        unsigned char *dma_bounce;
 123        wait_queue_head_t param_wq;
 124        wait_queue_head_t fw_wq;
 125        int using_dma;
 126        int dma_alignment;
 127        int fpga_version;
 128        int buffer_size;
 129        int atmel_flash;
 130};
 131
 132
 133struct solos_param {
 134        struct list_head list;
 135        pid_t pid;
 136        int port;
 137        struct sk_buff *response;
 138};
 139
 140#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
 141
 142MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
 143MODULE_DESCRIPTION("Solos PCI driver");
 144MODULE_VERSION(VERSION);
 145MODULE_LICENSE("GPL");
 146MODULE_FIRMWARE("solos-FPGA.bin");
 147MODULE_FIRMWARE("solos-Firmware.bin");
 148MODULE_FIRMWARE("solos-db-FPGA.bin");
 149MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
 150MODULE_PARM_DESC(atmdebug, "Print ATM data");
 151MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
 152MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
 153MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
 154MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
 155module_param(reset, int, 0444);
 156module_param(atmdebug, int, 0644);
 157module_param(firmware_upgrade, int, 0444);
 158module_param(fpga_upgrade, int, 0444);
 159module_param(db_firmware_upgrade, int, 0444);
 160module_param(db_fpga_upgrade, int, 0444);
 161
 162static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
 163                       struct atm_vcc *vcc);
 164static uint32_t fpga_tx(struct solos_card *);
 165static irqreturn_t solos_irq(int irq, void *dev_id);
 166static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 167static int atm_init(struct solos_card *, struct device *);
 168static void atm_remove(struct solos_card *);
 169static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
 170static void solos_bh(unsigned long);
 171static int print_buffer(struct sk_buff *buf);
 172
 173static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
 174{
 175        if (vcc->pop)
 176                vcc->pop(vcc, skb);
 177        else
 178                dev_kfree_skb_any(skb);
 179}
 180
 181static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
 182                                char *buf)
 183{
 184        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 185        struct solos_card *card = atmdev->dev_data;
 186        struct solos_param prm;
 187        struct sk_buff *skb;
 188        struct pkt_hdr *header;
 189        int buflen;
 190
 191        buflen = strlen(attr->attr.name) + 10;
 192
 193        skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 194        if (!skb) {
 195                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
 196                return -ENOMEM;
 197        }
 198
 199        header = skb_put(skb, sizeof(*header));
 200
 201        buflen = snprintf((void *)&header[1], buflen - 1,
 202                          "L%05d\n%s\n", current->pid, attr->attr.name);
 203        skb_put(skb, buflen);
 204
 205        header->size = cpu_to_le16(buflen);
 206        header->vpi = cpu_to_le16(0);
 207        header->vci = cpu_to_le16(0);
 208        header->type = cpu_to_le16(PKT_COMMAND);
 209
 210        prm.pid = current->pid;
 211        prm.response = NULL;
 212        prm.port = SOLOS_CHAN(atmdev);
 213
 214        spin_lock_irq(&card->param_queue_lock);
 215        list_add(&prm.list, &card->param_queue);
 216        spin_unlock_irq(&card->param_queue_lock);
 217
 218        fpga_queue(card, prm.port, skb, NULL);
 219
 220        wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 221
 222        spin_lock_irq(&card->param_queue_lock);
 223        list_del(&prm.list);
 224        spin_unlock_irq(&card->param_queue_lock);
 225
 226        if (!prm.response)
 227                return -EIO;
 228
 229        buflen = prm.response->len;
 230        memcpy(buf, prm.response->data, buflen);
 231        kfree_skb(prm.response);
 232
 233        return buflen;
 234}
 235
 236static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
 237                                 const char *buf, size_t count)
 238{
 239        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 240        struct solos_card *card = atmdev->dev_data;
 241        struct solos_param prm;
 242        struct sk_buff *skb;
 243        struct pkt_hdr *header;
 244        int buflen;
 245        ssize_t ret;
 246
 247        buflen = strlen(attr->attr.name) + 11 + count;
 248
 249        skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 250        if (!skb) {
 251                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
 252                return -ENOMEM;
 253        }
 254
 255        header = skb_put(skb, sizeof(*header));
 256
 257        buflen = snprintf((void *)&header[1], buflen - 1,
 258                          "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
 259
 260        skb_put(skb, buflen);
 261        header->size = cpu_to_le16(buflen);
 262        header->vpi = cpu_to_le16(0);
 263        header->vci = cpu_to_le16(0);
 264        header->type = cpu_to_le16(PKT_COMMAND);
 265
 266        prm.pid = current->pid;
 267        prm.response = NULL;
 268        prm.port = SOLOS_CHAN(atmdev);
 269
 270        spin_lock_irq(&card->param_queue_lock);
 271        list_add(&prm.list, &card->param_queue);
 272        spin_unlock_irq(&card->param_queue_lock);
 273
 274        fpga_queue(card, prm.port, skb, NULL);
 275
 276        wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 277
 278        spin_lock_irq(&card->param_queue_lock);
 279        list_del(&prm.list);
 280        spin_unlock_irq(&card->param_queue_lock);
 281
 282        skb = prm.response;
 283
 284        if (!skb)
 285                return -EIO;
 286
 287        buflen = skb->len;
 288
 289        /* Sometimes it has a newline, sometimes it doesn't. */
 290        if (skb->data[buflen - 1] == '\n')
 291                buflen--;
 292
 293        if (buflen == 2 && !strncmp(skb->data, "OK", 2))
 294                ret = count;
 295        else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
 296                ret = -EIO;
 297        else {
 298                /* We know we have enough space allocated for this; we allocated 
 299                   it ourselves */
 300                skb->data[buflen] = 0;
 301        
 302                dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
 303                         skb->data);
 304                ret = -EIO;
 305        }
 306        kfree_skb(skb);
 307
 308        return ret;
 309}
 310
 311static char *next_string(struct sk_buff *skb)
 312{
 313        int i = 0;
 314        char *this = skb->data;
 315        
 316        for (i = 0; i < skb->len; i++) {
 317                if (this[i] == '\n') {
 318                        this[i] = 0;
 319                        skb_pull(skb, i + 1);
 320                        return this;
 321                }
 322                if (!isprint(this[i]))
 323                        return NULL;
 324        }
 325        return NULL;
 326}
 327
 328/*
 329 * Status packet has fields separated by \n, starting with a version number
 330 * for the information therein. Fields are....
 331 *
 332 *     packet version
 333 *     RxBitRate        (version >= 1)
 334 *     TxBitRate        (version >= 1)
 335 *     State            (version >= 1)
 336 *     LocalSNRMargin   (version >= 1)
 337 *     LocalLineAttn    (version >= 1)
 338 */       
 339static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
 340{
 341        char *str, *state_str, *snr, *attn;
 342        int ver, rate_up, rate_down, err;
 343
 344        if (!card->atmdev[port])
 345                return -ENODEV;
 346
 347        str = next_string(skb);
 348        if (!str)
 349                return -EIO;
 350
 351        err = kstrtoint(str, 10, &ver);
 352        if (err) {
 353                dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
 354                return err;
 355        }
 356        if (ver < 1) {
 357                dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
 358                         ver);
 359                return -EIO;
 360        }
 361
 362        str = next_string(skb);
 363        if (!str)
 364                return -EIO;
 365        if (!strcmp(str, "ERROR")) {
 366                dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
 367                         port);
 368                return 0;
 369        }
 370
 371        err = kstrtoint(str, 10, &rate_down);
 372        if (err)
 373                return err;
 374
 375        str = next_string(skb);
 376        if (!str)
 377                return -EIO;
 378        err = kstrtoint(str, 10, &rate_up);
 379        if (err)
 380                return err;
 381
 382        state_str = next_string(skb);
 383        if (!state_str)
 384                return -EIO;
 385
 386        /* Anything but 'Showtime' is down */
 387        if (strcmp(state_str, "Showtime")) {
 388                atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
 389                dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
 390                return 0;
 391        }
 392
 393        snr = next_string(skb);
 394        if (!snr)
 395                return -EIO;
 396        attn = next_string(skb);
 397        if (!attn)
 398                return -EIO;
 399
 400        dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
 401                 port, state_str, rate_down/1000, rate_up/1000,
 402                 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
 403        
 404        card->atmdev[port]->link_rate = rate_down / 424;
 405        atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
 406
 407        return 0;
 408}
 409
 410static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
 411{
 412        struct solos_param *prm;
 413        unsigned long flags;
 414        int cmdpid;
 415        int found = 0, err;
 416
 417        if (skb->len < 7)
 418                return 0;
 419
 420        if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
 421            !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
 422            !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
 423            skb->data[6] != '\n')
 424                return 0;
 425
 426        err = kstrtoint(&skb->data[1], 10, &cmdpid);
 427        if (err)
 428                return err;
 429
 430        spin_lock_irqsave(&card->param_queue_lock, flags);
 431        list_for_each_entry(prm, &card->param_queue, list) {
 432                if (prm->port == port && prm->pid == cmdpid) {
 433                        prm->response = skb;
 434                        skb_pull(skb, 7);
 435                        wake_up(&card->param_wq);
 436                        found = 1;
 437                        break;
 438                }
 439        }
 440        spin_unlock_irqrestore(&card->param_queue_lock, flags);
 441        return found;
 442}
 443
 444static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 445                            char *buf)
 446{
 447        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 448        struct solos_card *card = atmdev->dev_data;
 449        struct sk_buff *skb;
 450        unsigned int len;
 451
 452        spin_lock(&card->cli_queue_lock);
 453        skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
 454        spin_unlock(&card->cli_queue_lock);
 455        if(skb == NULL)
 456                return sprintf(buf, "No data.\n");
 457
 458        len = skb->len;
 459        memcpy(buf, skb->data, len);
 460
 461        kfree_skb(skb);
 462        return len;
 463}
 464
 465static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
 466{
 467        struct sk_buff *skb;
 468        struct pkt_hdr *header;
 469
 470        if (size > (BUF_SIZE - sizeof(*header))) {
 471                dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
 472                return 0;
 473        }
 474        skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
 475        if (!skb) {
 476                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
 477                return 0;
 478        }
 479
 480        header = skb_put(skb, sizeof(*header));
 481
 482        header->size = cpu_to_le16(size);
 483        header->vpi = cpu_to_le16(0);
 484        header->vci = cpu_to_le16(0);
 485        header->type = cpu_to_le16(PKT_COMMAND);
 486
 487        skb_put_data(skb, buf, size);
 488
 489        fpga_queue(card, dev, skb, NULL);
 490
 491        return 0;
 492}
 493
 494static ssize_t console_store(struct device *dev, struct device_attribute *attr,
 495                             const char *buf, size_t count)
 496{
 497        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 498        struct solos_card *card = atmdev->dev_data;
 499        int err;
 500
 501        err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
 502
 503        return err?:count;
 504}
 505
 506struct geos_gpio_attr {
 507        struct device_attribute attr;
 508        int offset;
 509};
 510
 511#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)   \
 512        struct geos_gpio_attr gpio_attr_##_name = {             \
 513                .attr = __ATTR(_name, _mode, _show, _store),    \
 514                .offset = _offset }
 515
 516static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
 517                               const char *buf, size_t count)
 518{
 519        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 520        struct solos_card *card = dev_get_drvdata(dev);
 521        uint32_t data32;
 522
 523        if (count != 1 && (count != 2 || buf[1] != '\n'))
 524                return -EINVAL;
 525
 526        spin_lock_irq(&card->param_queue_lock);
 527        data32 = ioread32(card->config_regs + GPIO_STATUS);
 528        if (buf[0] == '1') {
 529                data32 |= 1 << gattr->offset;
 530                iowrite32(data32, card->config_regs + GPIO_STATUS);
 531        } else if (buf[0] == '0') {
 532                data32 &= ~(1 << gattr->offset);
 533                iowrite32(data32, card->config_regs + GPIO_STATUS);
 534        } else {
 535                count = -EINVAL;
 536        }
 537        spin_unlock_irq(&card->param_queue_lock);
 538        return count;
 539}
 540
 541static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
 542                              char *buf)
 543{
 544        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 545        struct solos_card *card = dev_get_drvdata(dev);
 546        uint32_t data32;
 547
 548        data32 = ioread32(card->config_regs + GPIO_STATUS);
 549        data32 = (data32 >> gattr->offset) & 1;
 550
 551        return sprintf(buf, "%d\n", data32);
 552}
 553
 554static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
 555                             char *buf)
 556{
 557        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 558        struct solos_card *card = dev_get_drvdata(dev);
 559        uint32_t data32;
 560
 561        data32 = ioread32(card->config_regs + GPIO_STATUS);
 562        switch (gattr->offset) {
 563        case 0:
 564                /* HardwareVersion */
 565                data32 = data32 & 0x1F;
 566                break;
 567        case 1:
 568                /* HardwareVariant */
 569                data32 = (data32 >> 5) & 0x0F;
 570                break;
 571        }
 572        return sprintf(buf, "%d\n", data32);
 573}
 574
 575static DEVICE_ATTR_RW(console);
 576
 577
 578#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
 579#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
 580
 581#include "solos-attrlist.c"
 582
 583static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
 584static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
 585static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
 586static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
 587static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
 588static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
 589static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
 590static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
 591#undef SOLOS_ATTR_RO
 592#undef SOLOS_ATTR_RW
 593
 594#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
 595#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
 596
 597static struct attribute *solos_attrs[] = {
 598#include "solos-attrlist.c"
 599        NULL
 600};
 601
 602static const struct attribute_group solos_attr_group = {
 603        .attrs = solos_attrs,
 604        .name = "parameters",
 605};
 606
 607static struct attribute *gpio_attrs[] = {
 608        &gpio_attr_GPIO1.attr.attr,
 609        &gpio_attr_GPIO2.attr.attr,
 610        &gpio_attr_GPIO3.attr.attr,
 611        &gpio_attr_GPIO4.attr.attr,
 612        &gpio_attr_GPIO5.attr.attr,
 613        &gpio_attr_PushButton.attr.attr,
 614        &gpio_attr_HardwareVersion.attr.attr,
 615        &gpio_attr_HardwareVariant.attr.attr,
 616        NULL
 617};
 618
 619static const struct attribute_group gpio_attr_group = {
 620        .attrs = gpio_attrs,
 621        .name = "gpio",
 622};
 623
 624static int flash_upgrade(struct solos_card *card, int chip)
 625{
 626        const struct firmware *fw;
 627        const char *fw_name;
 628        int blocksize = 0;
 629        int numblocks = 0;
 630        int offset;
 631
 632        switch (chip) {
 633        case 0:
 634                fw_name = "solos-FPGA.bin";
 635                if (card->atmel_flash)
 636                        blocksize = ATMEL_FPGA_BLOCK;
 637                else
 638                        blocksize = SPI_FLASH_BLOCK;
 639                break;
 640        case 1:
 641                fw_name = "solos-Firmware.bin";
 642                if (card->atmel_flash)
 643                        blocksize = ATMEL_SOLOS_BLOCK;
 644                else
 645                        blocksize = SPI_FLASH_BLOCK;
 646                break;
 647        case 2:
 648                if (card->fpga_version > LEGACY_BUFFERS){
 649                        fw_name = "solos-db-FPGA.bin";
 650                        if (card->atmel_flash)
 651                                blocksize = ATMEL_FPGA_BLOCK;
 652                        else
 653                                blocksize = SPI_FLASH_BLOCK;
 654                } else {
 655                        dev_info(&card->dev->dev, "FPGA version doesn't support"
 656                                        " daughter board upgrades\n");
 657                        return -EPERM;
 658                }
 659                break;
 660        case 3:
 661                if (card->fpga_version > LEGACY_BUFFERS){
 662                        fw_name = "solos-Firmware.bin";
 663                        if (card->atmel_flash)
 664                                blocksize = ATMEL_SOLOS_BLOCK;
 665                        else
 666                                blocksize = SPI_FLASH_BLOCK;
 667                } else {
 668                        dev_info(&card->dev->dev, "FPGA version doesn't support"
 669                                        " daughter board upgrades\n");
 670                        return -EPERM;
 671                }
 672                break;
 673        default:
 674                return -ENODEV;
 675        }
 676
 677        if (request_firmware(&fw, fw_name, &card->dev->dev))
 678                return -ENOENT;
 679
 680        dev_info(&card->dev->dev, "Flash upgrade starting\n");
 681
 682        /* New FPGAs require driver version before permitting flash upgrades */
 683        iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
 684
 685        numblocks = fw->size / blocksize;
 686        dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
 687        dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
 688        
 689        dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
 690        iowrite32(1, card->config_regs + FPGA_MODE);
 691        (void) ioread32(card->config_regs + FPGA_MODE); 
 692
 693        /* Set mode to Chip Erase */
 694        if(chip == 0 || chip == 2)
 695                dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
 696        if(chip == 1 || chip == 3)
 697                dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
 698        iowrite32((chip * 2), card->config_regs + FLASH_MODE);
 699
 700
 701        iowrite32(1, card->config_regs + WRITE_FLASH);
 702        wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 703
 704        for (offset = 0; offset < fw->size; offset += blocksize) {
 705                int i;
 706
 707                /* Clear write flag */
 708                iowrite32(0, card->config_regs + WRITE_FLASH);
 709
 710                /* Set mode to Block Write */
 711                /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
 712                iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 713
 714                /* Copy block to buffer, swapping each 16 bits for Atmel flash */
 715                for(i = 0; i < blocksize; i += 4) {
 716                        uint32_t word;
 717                        if (card->atmel_flash)
 718                                word = swahb32p((uint32_t *)(fw->data + offset + i));
 719                        else
 720                                word = *(uint32_t *)(fw->data + offset + i);
 721                        if(card->fpga_version > LEGACY_BUFFERS)
 722                                iowrite32(word, FLASH_BUF + i);
 723                        else
 724                                iowrite32(word, RX_BUF(card, 3) + i);
 725                }
 726
 727                /* Specify block number and then trigger flash write */
 728                iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
 729                iowrite32(1, card->config_regs + WRITE_FLASH);
 730                wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 731        }
 732
 733        release_firmware(fw);
 734        iowrite32(0, card->config_regs + WRITE_FLASH);
 735        iowrite32(0, card->config_regs + FPGA_MODE);
 736        iowrite32(0, card->config_regs + FLASH_MODE);
 737        dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
 738        return 0;
 739}
 740
 741static irqreturn_t solos_irq(int irq, void *dev_id)
 742{
 743        struct solos_card *card = dev_id;
 744        int handled = 1;
 745
 746        iowrite32(0, card->config_regs + IRQ_CLEAR);
 747
 748        /* If we're up and running, just kick the tasklet to process TX/RX */
 749        if (card->atmdev[0])
 750                tasklet_schedule(&card->tlet);
 751        else
 752                wake_up(&card->fw_wq);
 753
 754        return IRQ_RETVAL(handled);
 755}
 756
 757static void solos_bh(unsigned long card_arg)
 758{
 759        struct solos_card *card = (void *)card_arg;
 760        uint32_t card_flags;
 761        uint32_t rx_done = 0;
 762        int port;
 763
 764        /*
 765         * Since fpga_tx() is going to need to read the flags under its lock,
 766         * it can return them to us so that we don't have to hit PCI MMIO
 767         * again for the same information
 768         */
 769        card_flags = fpga_tx(card);
 770
 771        for (port = 0; port < card->nr_ports; port++) {
 772                if (card_flags & (0x10 << port)) {
 773                        struct pkt_hdr _hdr, *header;
 774                        struct sk_buff *skb;
 775                        struct atm_vcc *vcc;
 776                        int size;
 777
 778                        if (card->using_dma) {
 779                                skb = card->rx_skb[port];
 780                                card->rx_skb[port] = NULL;
 781
 782                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
 783                                                 RX_DMA_SIZE, DMA_FROM_DEVICE);
 784
 785                                header = (void *)skb->data;
 786                                size = le16_to_cpu(header->size);
 787                                skb_put(skb, size + sizeof(*header));
 788                                skb_pull(skb, sizeof(*header));
 789                        } else {
 790                                header = &_hdr;
 791
 792                                rx_done |= 0x10 << port;
 793
 794                                memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
 795
 796                                size = le16_to_cpu(header->size);
 797                                if (size > (card->buffer_size - sizeof(*header))){
 798                                        dev_warn(&card->dev->dev, "Invalid buffer size\n");
 799                                        continue;
 800                                }
 801
 802                                /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
 803                                 * headroom, and ensures we can route packets back out an
 804                                 * Ethernet interface (for example) without having to
 805                                 * reallocate. Adding NET_IP_ALIGN also ensures that both
 806                                 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
 807                                skb = netdev_alloc_skb_ip_align(NULL, size + 1);
 808                                if (!skb) {
 809                                        if (net_ratelimit())
 810                                                dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
 811                                        continue;
 812                                }
 813
 814                                memcpy_fromio(skb_put(skb, size),
 815                                              RX_BUF(card, port) + sizeof(*header),
 816                                              size);
 817                        }
 818                        if (atmdebug) {
 819                                dev_info(&card->dev->dev, "Received: port %d\n", port);
 820                                dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
 821                                         size, le16_to_cpu(header->vpi),
 822                                         le16_to_cpu(header->vci));
 823                                print_buffer(skb);
 824                        }
 825
 826                        switch (le16_to_cpu(header->type)) {
 827                        case PKT_DATA:
 828                                vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
 829                                               le16_to_cpu(header->vci));
 830                                if (!vcc) {
 831                                        if (net_ratelimit())
 832                                                dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
 833                                                         le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
 834                                                         port);
 835                                        dev_kfree_skb_any(skb);
 836                                        break;
 837                                }
 838                                atm_charge(vcc, skb->truesize);
 839                                vcc->push(vcc, skb);
 840                                atomic_inc(&vcc->stats->rx);
 841                                break;
 842
 843                        case PKT_STATUS:
 844                                if (process_status(card, port, skb) &&
 845                                    net_ratelimit()) {
 846                                        dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
 847                                        print_buffer(skb);
 848                                }
 849                                dev_kfree_skb_any(skb);
 850                                break;
 851
 852                        case PKT_COMMAND:
 853                        default: /* FIXME: Not really, surely? */
 854                                if (process_command(card, port, skb))
 855                                        break;
 856                                spin_lock(&card->cli_queue_lock);
 857                                if (skb_queue_len(&card->cli_queue[port]) > 10) {
 858                                        if (net_ratelimit())
 859                                                dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
 860                                                         port);
 861                                        dev_kfree_skb_any(skb);
 862                                } else
 863                                        skb_queue_tail(&card->cli_queue[port], skb);
 864                                spin_unlock(&card->cli_queue_lock);
 865                                break;
 866                        }
 867                }
 868                /* Allocate RX skbs for any ports which need them */
 869                if (card->using_dma && card->atmdev[port] &&
 870                    !card->rx_skb[port]) {
 871                        /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
 872                         * here; the FPGA can only DMA to addresses which are
 873                         * aligned to 4 bytes. */
 874                        struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
 875                        if (skb) {
 876                                SKB_CB(skb)->dma_addr =
 877                                        dma_map_single(&card->dev->dev, skb->data,
 878                                                       RX_DMA_SIZE, DMA_FROM_DEVICE);
 879                                iowrite32(SKB_CB(skb)->dma_addr,
 880                                          card->config_regs + RX_DMA_ADDR(port));
 881                                card->rx_skb[port] = skb;
 882                        } else {
 883                                if (net_ratelimit())
 884                                        dev_warn(&card->dev->dev, "Failed to allocate RX skb");
 885
 886                                /* We'll have to try again later */
 887                                tasklet_schedule(&card->tlet);
 888                        }
 889                }
 890        }
 891        if (rx_done)
 892                iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
 893
 894        return;
 895}
 896
 897static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
 898{
 899        struct hlist_head *head;
 900        struct atm_vcc *vcc = NULL;
 901        struct sock *s;
 902
 903        read_lock(&vcc_sklist_lock);
 904        head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
 905        sk_for_each(s, head) {
 906                vcc = atm_sk(s);
 907                if (vcc->dev == dev && vcc->vci == vci &&
 908                    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
 909                    test_bit(ATM_VF_READY, &vcc->flags))
 910                        goto out;
 911        }
 912        vcc = NULL;
 913 out:
 914        read_unlock(&vcc_sklist_lock);
 915        return vcc;
 916}
 917
 918static int popen(struct atm_vcc *vcc)
 919{
 920        struct solos_card *card = vcc->dev->dev_data;
 921        struct sk_buff *skb;
 922        struct pkt_hdr *header;
 923
 924        if (vcc->qos.aal != ATM_AAL5) {
 925                dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
 926                         vcc->qos.aal);
 927                return -EINVAL;
 928        }
 929
 930        skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 931        if (!skb) {
 932                if (net_ratelimit())
 933                        dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
 934                return -ENOMEM;
 935        }
 936        header = skb_put(skb, sizeof(*header));
 937
 938        header->size = cpu_to_le16(0);
 939        header->vpi = cpu_to_le16(vcc->vpi);
 940        header->vci = cpu_to_le16(vcc->vci);
 941        header->type = cpu_to_le16(PKT_POPEN);
 942
 943        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
 944
 945        set_bit(ATM_VF_ADDR, &vcc->flags);
 946        set_bit(ATM_VF_READY, &vcc->flags);
 947
 948        return 0;
 949}
 950
 951static void pclose(struct atm_vcc *vcc)
 952{
 953        struct solos_card *card = vcc->dev->dev_data;
 954        unsigned char port = SOLOS_CHAN(vcc->dev);
 955        struct sk_buff *skb, *tmpskb;
 956        struct pkt_hdr *header;
 957
 958        /* Remove any yet-to-be-transmitted packets from the pending queue */
 959        spin_lock(&card->tx_queue_lock);
 960        skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
 961                if (SKB_CB(skb)->vcc == vcc) {
 962                        skb_unlink(skb, &card->tx_queue[port]);
 963                        solos_pop(vcc, skb);
 964                }
 965        }
 966        spin_unlock(&card->tx_queue_lock);
 967
 968        skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 969        if (!skb) {
 970                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
 971                return;
 972        }
 973        header = skb_put(skb, sizeof(*header));
 974
 975        header->size = cpu_to_le16(0);
 976        header->vpi = cpu_to_le16(vcc->vpi);
 977        header->vci = cpu_to_le16(vcc->vci);
 978        header->type = cpu_to_le16(PKT_PCLOSE);
 979
 980        skb_get(skb);
 981        fpga_queue(card, port, skb, NULL);
 982
 983        if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
 984                dev_warn(&card->dev->dev,
 985                         "Timeout waiting for VCC close on port %d\n", port);
 986
 987        dev_kfree_skb(skb);
 988
 989        /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
 990           tasklet has finished processing any incoming packets (and, more to
 991           the point, using the vcc pointer). */
 992        tasklet_unlock_wait(&card->tlet);
 993
 994        clear_bit(ATM_VF_ADDR, &vcc->flags);
 995
 996        return;
 997}
 998
 999static int print_buffer(struct sk_buff *buf)
1000{
1001        int len,i;
1002        char msg[500];
1003        char item[10];
1004
1005        len = buf->len;
1006        for (i = 0; i < len; i++){
1007                if(i % 8 == 0)
1008                        sprintf(msg, "%02X: ", i);
1009
1010                sprintf(item,"%02X ",*(buf->data + i));
1011                strcat(msg, item);
1012                if(i % 8 == 7) {
1013                        sprintf(item, "\n");
1014                        strcat(msg, item);
1015                        printk(KERN_DEBUG "%s", msg);
1016                }
1017        }
1018        if (i % 8 != 0) {
1019                sprintf(item, "\n");
1020                strcat(msg, item);
1021                printk(KERN_DEBUG "%s", msg);
1022        }
1023        printk(KERN_DEBUG "\n");
1024
1025        return 0;
1026}
1027
1028static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
1029                       struct atm_vcc *vcc)
1030{
1031        int old_len;
1032        unsigned long flags;
1033
1034        SKB_CB(skb)->vcc = vcc;
1035
1036        spin_lock_irqsave(&card->tx_queue_lock, flags);
1037        old_len = skb_queue_len(&card->tx_queue[port]);
1038        skb_queue_tail(&card->tx_queue[port], skb);
1039        if (!old_len)
1040                card->tx_mask |= (1 << port);
1041        spin_unlock_irqrestore(&card->tx_queue_lock, flags);
1042
1043        /* Theoretically we could just schedule the tasklet here, but
1044           that introduces latency we don't want -- it's noticeable */
1045        if (!old_len)
1046                fpga_tx(card);
1047}
1048
1049static uint32_t fpga_tx(struct solos_card *card)
1050{
1051        uint32_t tx_pending, card_flags;
1052        uint32_t tx_started = 0;
1053        struct sk_buff *skb;
1054        struct atm_vcc *vcc;
1055        unsigned char port;
1056        unsigned long flags;
1057
1058        spin_lock_irqsave(&card->tx_lock, flags);
1059        
1060        card_flags = ioread32(card->config_regs + FLAGS_ADDR);
1061        /*
1062         * The queue lock is required for _writing_ to tx_mask, but we're
1063         * OK to read it here without locking. The only potential update
1064         * that we could race with is in fpga_queue() where it sets a bit
1065         * for a new port... but it's going to call this function again if
1066         * it's doing that, anyway.
1067         */
1068        tx_pending = card->tx_mask & ~card_flags;
1069
1070        for (port = 0; tx_pending; tx_pending >>= 1, port++) {
1071                if (tx_pending & 1) {
1072                        struct sk_buff *oldskb = card->tx_skb[port];
1073                        if (oldskb) {
1074                                dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
1075                                                 oldskb->len, DMA_TO_DEVICE);
1076                                card->tx_skb[port] = NULL;
1077                        }
1078                        spin_lock(&card->tx_queue_lock);
1079                        skb = skb_dequeue(&card->tx_queue[port]);
1080                        if (!skb)
1081                                card->tx_mask &= ~(1 << port);
1082                        spin_unlock(&card->tx_queue_lock);
1083
1084                        if (skb && !card->using_dma) {
1085                                memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
1086                                tx_started |= 1 << port;
1087                                oldskb = skb; /* We're done with this skb already */
1088                        } else if (skb && card->using_dma) {
1089                                unsigned char *data = skb->data;
1090                                if ((unsigned long)data & card->dma_alignment) {
1091                                        data = card->dma_bounce + (BUF_SIZE * port);
1092                                        memcpy(data, skb->data, skb->len);
1093                                }
1094                                SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
1095                                                                       skb->len, DMA_TO_DEVICE);
1096                                card->tx_skb[port] = skb;
1097                                iowrite32(SKB_CB(skb)->dma_addr,
1098                                          card->config_regs + TX_DMA_ADDR(port));
1099                        }
1100
1101                        if (!oldskb)
1102                                continue;
1103
1104                        /* Clean up and free oldskb now it's gone */
1105                        if (atmdebug) {
1106                                struct pkt_hdr *header = (void *)oldskb->data;
1107                                int size = le16_to_cpu(header->size);
1108
1109                                skb_pull(oldskb, sizeof(*header));
1110                                dev_info(&card->dev->dev, "Transmitted: port %d\n",
1111                                         port);
1112                                dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1113                                         size, le16_to_cpu(header->vpi),
1114                                         le16_to_cpu(header->vci));
1115                                print_buffer(oldskb);
1116                        }
1117
1118                        vcc = SKB_CB(oldskb)->vcc;
1119
1120                        if (vcc) {
1121                                atomic_inc(&vcc->stats->tx);
1122                                solos_pop(vcc, oldskb);
1123                        } else {
1124                                dev_kfree_skb_irq(oldskb);
1125                                wake_up(&card->param_wq);
1126                        }
1127                }
1128        }
1129        /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1130        if (tx_started)
1131                iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1132
1133        spin_unlock_irqrestore(&card->tx_lock, flags);
1134        return card_flags;
1135}
1136
1137static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1138{
1139        struct solos_card *card = vcc->dev->dev_data;
1140        struct pkt_hdr *header;
1141        int pktlen;
1142
1143        pktlen = skb->len;
1144        if (pktlen > (BUF_SIZE - sizeof(*header))) {
1145                dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1146                solos_pop(vcc, skb);
1147                return 0;
1148        }
1149
1150        if (!skb_clone_writable(skb, sizeof(*header))) {
1151                int expand_by = 0;
1152                int ret;
1153
1154                if (skb_headroom(skb) < sizeof(*header))
1155                        expand_by = sizeof(*header) - skb_headroom(skb);
1156
1157                ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1158                if (ret) {
1159                        dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1160                        solos_pop(vcc, skb);
1161                        return ret;
1162                }
1163        }
1164
1165        header = skb_push(skb, sizeof(*header));
1166
1167        /* This does _not_ include the size of the header */
1168        header->size = cpu_to_le16(pktlen);
1169        header->vpi = cpu_to_le16(vcc->vpi);
1170        header->vci = cpu_to_le16(vcc->vci);
1171        header->type = cpu_to_le16(PKT_DATA);
1172
1173        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1174
1175        return 0;
1176}
1177
1178static const struct atmdev_ops fpga_ops = {
1179        .open =         popen,
1180        .close =        pclose,
1181        .ioctl =        NULL,
1182        .send =         psend,
1183        .send_oam =     NULL,
1184        .phy_put =      NULL,
1185        .phy_get =      NULL,
1186        .change_qos =   NULL,
1187        .proc_read =    NULL,
1188        .owner =        THIS_MODULE
1189};
1190
1191static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1192{
1193        int err;
1194        uint16_t fpga_ver;
1195        uint8_t major_ver, minor_ver;
1196        uint32_t data32;
1197        struct solos_card *card;
1198
1199        card = kzalloc(sizeof(*card), GFP_KERNEL);
1200        if (!card)
1201                return -ENOMEM;
1202
1203        card->dev = dev;
1204        init_waitqueue_head(&card->fw_wq);
1205        init_waitqueue_head(&card->param_wq);
1206
1207        err = pci_enable_device(dev);
1208        if (err) {
1209                dev_warn(&dev->dev,  "Failed to enable PCI device\n");
1210                goto out;
1211        }
1212
1213        err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
1214        if (err) {
1215                dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1216                goto out;
1217        }
1218
1219        err = pci_request_regions(dev, "solos");
1220        if (err) {
1221                dev_warn(&dev->dev, "Failed to request regions\n");
1222                goto out;
1223        }
1224
1225        card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1226        if (!card->config_regs) {
1227                dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1228                err = -ENOMEM;
1229                goto out_release_regions;
1230        }
1231        card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1232        if (!card->buffers) {
1233                dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1234                err = -ENOMEM;
1235                goto out_unmap_config;
1236        }
1237
1238        if (reset) {
1239                iowrite32(1, card->config_regs + FPGA_MODE);
1240                ioread32(card->config_regs + FPGA_MODE);
1241
1242                iowrite32(0, card->config_regs + FPGA_MODE);
1243                ioread32(card->config_regs + FPGA_MODE);
1244        }
1245
1246        data32 = ioread32(card->config_regs + FPGA_VER);
1247        fpga_ver = (data32 & 0x0000FFFF);
1248        major_ver = ((data32 & 0xFF000000) >> 24);
1249        minor_ver = ((data32 & 0x00FF0000) >> 16);
1250        card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1251        if (card->fpga_version > LEGACY_BUFFERS)
1252                card->buffer_size = BUF_SIZE;
1253        else
1254                card->buffer_size = OLD_BUF_SIZE;
1255        dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1256                 major_ver, minor_ver, fpga_ver);
1257
1258        if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1259                              db_fpga_upgrade || db_firmware_upgrade)) {
1260                dev_warn(&dev->dev,
1261                         "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1262                fpga_upgrade = firmware_upgrade = 0;
1263                db_fpga_upgrade = db_firmware_upgrade = 0;
1264        }
1265
1266        /* Stopped using Atmel flash after 0.03-38 */
1267        if (fpga_ver < 39)
1268                card->atmel_flash = 1;
1269        else
1270                card->atmel_flash = 0;
1271
1272        data32 = ioread32(card->config_regs + PORTS);
1273        card->nr_ports = (data32 & 0x000000FF);
1274
1275        if (card->fpga_version >= DMA_SUPPORTED) {
1276                pci_set_master(dev);
1277                card->using_dma = 1;
1278                if (1) { /* All known FPGA versions so far */
1279                        card->dma_alignment = 3;
1280                        card->dma_bounce = kmalloc_array(card->nr_ports,
1281                                                         BUF_SIZE, GFP_KERNEL);
1282                        if (!card->dma_bounce) {
1283                                dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
1284                                err = -ENOMEM;
1285                                /* Fallback to MMIO doesn't work */
1286                                goto out_unmap_both;
1287                        }
1288                }
1289        } else {
1290                card->using_dma = 0;
1291                /* Set RX empty flag for all ports */
1292                iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1293        }
1294
1295        pci_set_drvdata(dev, card);
1296
1297        tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1298        spin_lock_init(&card->tx_lock);
1299        spin_lock_init(&card->tx_queue_lock);
1300        spin_lock_init(&card->cli_queue_lock);
1301        spin_lock_init(&card->param_queue_lock);
1302        INIT_LIST_HEAD(&card->param_queue);
1303
1304        err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1305                          "solos-pci", card);
1306        if (err) {
1307                dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1308                goto out_unmap_both;
1309        }
1310
1311        iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1312
1313        if (fpga_upgrade)
1314                flash_upgrade(card, 0);
1315
1316        if (firmware_upgrade)
1317                flash_upgrade(card, 1);
1318
1319        if (db_fpga_upgrade)
1320                flash_upgrade(card, 2);
1321
1322        if (db_firmware_upgrade)
1323                flash_upgrade(card, 3);
1324
1325        err = atm_init(card, &dev->dev);
1326        if (err)
1327                goto out_free_irq;
1328
1329        if (card->fpga_version >= DMA_SUPPORTED &&
1330            sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
1331                dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
1332
1333        return 0;
1334
1335 out_free_irq:
1336        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1337        free_irq(dev->irq, card);
1338        tasklet_kill(&card->tlet);
1339        
1340 out_unmap_both:
1341        kfree(card->dma_bounce);
1342        pci_iounmap(dev, card->buffers);
1343 out_unmap_config:
1344        pci_iounmap(dev, card->config_regs);
1345 out_release_regions:
1346        pci_release_regions(dev);
1347 out:
1348        kfree(card);
1349        return err;
1350}
1351
1352static int atm_init(struct solos_card *card, struct device *parent)
1353{
1354        int i;
1355
1356        for (i = 0; i < card->nr_ports; i++) {
1357                struct sk_buff *skb;
1358                struct pkt_hdr *header;
1359
1360                skb_queue_head_init(&card->tx_queue[i]);
1361                skb_queue_head_init(&card->cli_queue[i]);
1362
1363                card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1364                if (!card->atmdev[i]) {
1365                        dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1366                        atm_remove(card);
1367                        return -ENODEV;
1368                }
1369                if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1370                        dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1371                if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1372                        dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1373
1374                dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1375
1376                card->atmdev[i]->ci_range.vpi_bits = 8;
1377                card->atmdev[i]->ci_range.vci_bits = 16;
1378                card->atmdev[i]->dev_data = card;
1379                card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1380                atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1381
1382                skb = alloc_skb(sizeof(*header), GFP_KERNEL);
1383                if (!skb) {
1384                        dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1385                        continue;
1386                }
1387
1388                header = skb_put(skb, sizeof(*header));
1389
1390                header->size = cpu_to_le16(0);
1391                header->vpi = cpu_to_le16(0);
1392                header->vci = cpu_to_le16(0);
1393                header->type = cpu_to_le16(PKT_STATUS);
1394
1395                fpga_queue(card, i, skb, NULL);
1396        }
1397        return 0;
1398}
1399
1400static void atm_remove(struct solos_card *card)
1401{
1402        int i;
1403
1404        for (i = 0; i < card->nr_ports; i++) {
1405                if (card->atmdev[i]) {
1406                        struct sk_buff *skb;
1407
1408                        dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1409
1410                        sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1411                        atm_dev_deregister(card->atmdev[i]);
1412
1413                        skb = card->rx_skb[i];
1414                        if (skb) {
1415                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1416                                                 RX_DMA_SIZE, DMA_FROM_DEVICE);
1417                                dev_kfree_skb(skb);
1418                        }
1419                        skb = card->tx_skb[i];
1420                        if (skb) {
1421                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1422                                                 skb->len, DMA_TO_DEVICE);
1423                                dev_kfree_skb(skb);
1424                        }
1425                        while ((skb = skb_dequeue(&card->tx_queue[i])))
1426                                dev_kfree_skb(skb);
1427 
1428                }
1429        }
1430}
1431
1432static void fpga_remove(struct pci_dev *dev)
1433{
1434        struct solos_card *card = pci_get_drvdata(dev);
1435        
1436        /* Disable IRQs */
1437        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1438
1439        /* Reset FPGA */
1440        iowrite32(1, card->config_regs + FPGA_MODE);
1441        (void)ioread32(card->config_regs + FPGA_MODE); 
1442
1443        if (card->fpga_version >= DMA_SUPPORTED)
1444                sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
1445
1446        atm_remove(card);
1447
1448        free_irq(dev->irq, card);
1449        tasklet_kill(&card->tlet);
1450
1451        kfree(card->dma_bounce);
1452
1453        /* Release device from reset */
1454        iowrite32(0, card->config_regs + FPGA_MODE);
1455        (void)ioread32(card->config_regs + FPGA_MODE); 
1456
1457        pci_iounmap(dev, card->buffers);
1458        pci_iounmap(dev, card->config_regs);
1459
1460        pci_release_regions(dev);
1461        pci_disable_device(dev);
1462
1463        kfree(card);
1464}
1465
1466static const struct pci_device_id fpga_pci_tbl[] = {
1467        { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1468        { 0, }
1469};
1470
1471MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1472
1473static struct pci_driver fpga_driver = {
1474        .name =         "solos",
1475        .id_table =     fpga_pci_tbl,
1476        .probe =        fpga_probe,
1477        .remove =       fpga_remove,
1478};
1479
1480
1481static int __init solos_pci_init(void)
1482{
1483        BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
1484
1485        printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1486        return pci_register_driver(&fpga_driver);
1487}
1488
1489static void __exit solos_pci_exit(void)
1490{
1491        pci_unregister_driver(&fpga_driver);
1492        printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1493}
1494
1495module_init(solos_pci_init);
1496module_exit(solos_pci_exit);
1497