linux/drivers/char/applicom.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/* Derived from Applicom driver ac.c for SCO Unix                            */
   3/* Ported by David Woodhouse, Axiom (Cambridge) Ltd.                         */
   4/* dwmw2@infradead.org 30/8/98                                               */
   5/* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $                          */
   6/* This module is for Linux 2.1 and 2.2 series kernels.                      */
   7/*****************************************************************************/
   8/* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt  */
   9/* ceci pour reseter correctement apres une sortie sauvage                   */
  10/* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption,     */
  11/* LoopCount n'etait pas initialise a 0.                                     */
  12/* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte   */
  13/*           pour liberer le bus                                             */
  14/* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
  15/* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
  16/* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
  17/* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
  18/* addresses de base des cartes, IOCTL 6 plus complet                         */
  19/* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
  20/* de code autre que le texte V2.6.1 en V2.8.0                               */
  21/*****************************************************************************/
  22
  23
  24#include <linux/kernel.h>
  25#include <linux/module.h>
  26#include <linux/interrupt.h>
  27#include <linux/sched/signal.h>
  28#include <linux/slab.h>
  29#include <linux/errno.h>
  30#include <linux/mutex.h>
  31#include <linux/miscdevice.h>
  32#include <linux/pci.h>
  33#include <linux/wait.h>
  34#include <linux/init.h>
  35#include <linux/fs.h>
  36#include <linux/nospec.h>
  37
  38#include <asm/io.h>
  39#include <linux/uaccess.h>
  40
  41#include "applicom.h"
  42
  43
  44/* NOTE: We use for loops with {write,read}b() instead of 
  45   memcpy_{from,to}io throughout this driver. This is because
  46   the board doesn't correctly handle word accesses - only
  47   bytes. 
  48*/
  49
  50
  51#undef DEBUG
  52
  53#define MAX_BOARD 8             /* maximum of pc board possible */
  54#define MAX_ISA_BOARD 4
  55#define LEN_RAM_IO 0x800
  56
  57#ifndef PCI_VENDOR_ID_APPLICOM
  58#define PCI_VENDOR_ID_APPLICOM                0x1389
  59#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC     0x0001
  60#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
  61#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB     0x0003
  62#endif
  63
  64static DEFINE_MUTEX(ac_mutex);
  65static char *applicom_pci_devnames[] = {
  66        "PCI board",
  67        "PCI2000IBS / PCI2000CAN",
  68        "PCI2000PFB"
  69};
  70
  71static const struct pci_device_id applicom_pci_tbl[] = {
  72        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
  73        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
  74        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
  75        { 0 }
  76};
  77MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
  78
  79MODULE_AUTHOR("David Woodhouse & Applicom International");
  80MODULE_DESCRIPTION("Driver for Applicom Profibus card");
  81MODULE_LICENSE("GPL");
  82MODULE_ALIAS_MISCDEV(AC_MINOR);
  83
  84MODULE_SUPPORTED_DEVICE("ac");
  85
  86
  87static struct applicom_board {
  88        unsigned long PhysIO;
  89        void __iomem *RamIO;
  90        wait_queue_head_t FlagSleepSend;
  91        long irq;
  92        spinlock_t mutex;
  93} apbs[MAX_BOARD];
  94
  95static unsigned int irq = 0;    /* interrupt number IRQ       */
  96static unsigned long mem = 0;   /* physical segment of board  */
  97
  98module_param_hw(irq, uint, irq, 0);
  99MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
 100module_param_hw(mem, ulong, iomem, 0);
 101MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
 102
 103static unsigned int numboards;  /* number of installed boards */
 104static volatile unsigned char Dummy;
 105static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
 106static unsigned int WriteErrorCount;    /* number of write error      */
 107static unsigned int ReadErrorCount;     /* number of read error       */
 108static unsigned int DeviceErrorCount;   /* number of device error     */
 109
 110static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
 111static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
 112static long ac_ioctl(struct file *, unsigned int, unsigned long);
 113static irqreturn_t ac_interrupt(int, void *);
 114
 115static const struct file_operations ac_fops = {
 116        .owner = THIS_MODULE,
 117        .llseek = no_llseek,
 118        .read = ac_read,
 119        .write = ac_write,
 120        .unlocked_ioctl = ac_ioctl,
 121};
 122
 123static struct miscdevice ac_miscdev = {
 124        AC_MINOR,
 125        "ac",
 126        &ac_fops
 127};
 128
 129static int dummy;       /* dev_id for request_irq() */
 130
 131static int ac_register_board(unsigned long physloc, void __iomem *loc, 
 132                      unsigned char boardno)
 133{
 134        volatile unsigned char byte_reset_it;
 135
 136        if((readb(loc + CONF_END_TEST)     != 0x00) ||
 137           (readb(loc + CONF_END_TEST + 1) != 0x55) ||
 138           (readb(loc + CONF_END_TEST + 2) != 0xAA) ||
 139           (readb(loc + CONF_END_TEST + 3) != 0xFF))
 140                return 0;
 141
 142        if (!boardno)
 143                boardno = readb(loc + NUMCARD_OWNER_TO_PC);
 144
 145        if (!boardno || boardno > MAX_BOARD) {
 146                printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
 147                       boardno, physloc, MAX_BOARD);
 148                return 0;
 149        }
 150
 151        if (apbs[boardno - 1].RamIO) {
 152                printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", 
 153                       boardno, physloc, boardno, apbs[boardno-1].PhysIO);
 154                return 0;
 155        }
 156
 157        boardno--;
 158
 159        apbs[boardno].PhysIO = physloc;
 160        apbs[boardno].RamIO = loc;
 161        init_waitqueue_head(&apbs[boardno].FlagSleepSend);
 162        spin_lock_init(&apbs[boardno].mutex);
 163        byte_reset_it = readb(loc + RAM_IT_TO_PC);
 164
 165        numboards++;
 166        return boardno + 1;
 167}
 168
 169static void __exit applicom_exit(void)
 170{
 171        unsigned int i;
 172
 173        misc_deregister(&ac_miscdev);
 174
 175        for (i = 0; i < MAX_BOARD; i++) {
 176
 177                if (!apbs[i].RamIO)
 178                        continue;
 179
 180                if (apbs[i].irq)
 181                        free_irq(apbs[i].irq, &dummy);
 182
 183                iounmap(apbs[i].RamIO);
 184        }
 185}
 186
 187static int __init applicom_init(void)
 188{
 189        int i, numisa = 0;
 190        struct pci_dev *dev = NULL;
 191        void __iomem *RamIO;
 192        int boardno, ret;
 193
 194        printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
 195
 196        /* No mem and irq given - check for a PCI card */
 197
 198        while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
 199
 200                if (!pci_match_id(applicom_pci_tbl, dev))
 201                        continue;
 202                
 203                if (pci_enable_device(dev))
 204                        return -EIO;
 205
 206                RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
 207
 208                if (!RamIO) {
 209                        printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
 210                                "space at 0x%llx\n",
 211                                (unsigned long long)pci_resource_start(dev, 0));
 212                        pci_disable_device(dev);
 213                        return -EIO;
 214                }
 215
 216                printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
 217                       applicom_pci_devnames[dev->device-1],
 218                           (unsigned long long)pci_resource_start(dev, 0),
 219                       dev->irq);
 220
 221                boardno = ac_register_board(pci_resource_start(dev, 0),
 222                                RamIO, 0);
 223                if (!boardno) {
 224                        printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
 225                        iounmap(RamIO);
 226                        pci_disable_device(dev);
 227                        continue;
 228                }
 229
 230                if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
 231                        printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
 232                        iounmap(RamIO);
 233                        pci_disable_device(dev);
 234                        apbs[boardno - 1].RamIO = NULL;
 235                        continue;
 236                }
 237
 238                /* Enable interrupts. */
 239
 240                writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
 241
 242                apbs[boardno - 1].irq = dev->irq;
 243        }
 244
 245        /* Finished with PCI cards. If none registered, 
 246         * and there was no mem/irq specified, exit */
 247
 248        if (!mem || !irq) {
 249                if (numboards)
 250                        goto fin;
 251                else {
 252                        printk(KERN_INFO "ac.o: No PCI boards found.\n");
 253                        printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
 254                        return -ENXIO;
 255                }
 256        }
 257
 258        /* Now try the specified ISA cards */
 259
 260        for (i = 0; i < MAX_ISA_BOARD; i++) {
 261                RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
 262
 263                if (!RamIO) {
 264                        printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
 265                        continue;
 266                }
 267
 268                if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
 269                                                  RamIO,i+1))) {
 270                        iounmap(RamIO);
 271                        continue;
 272                }
 273
 274                printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
 275
 276                if (!numisa) {
 277                        if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
 278                                printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
 279                                iounmap(RamIO);
 280                                apbs[boardno - 1].RamIO = NULL;
 281                        }
 282                        else
 283                                apbs[boardno - 1].irq = irq;
 284                }
 285                else
 286                        apbs[boardno - 1].irq = 0;
 287
 288                numisa++;
 289        }
 290
 291        if (!numisa)
 292                printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
 293                                "at mem 0x%lx\n", mem);
 294
 295 fin:
 296        init_waitqueue_head(&FlagSleepRec);
 297
 298        WriteErrorCount = 0;
 299        ReadErrorCount = 0;
 300        DeviceErrorCount = 0;
 301
 302        if (numboards) {
 303                ret = misc_register(&ac_miscdev);
 304                if (ret) {
 305                        printk(KERN_WARNING "ac.o: Unable to register misc device\n");
 306                        goto out;
 307                }
 308                for (i = 0; i < MAX_BOARD; i++) {
 309                        int serial;
 310                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 311
 312                        if (!apbs[i].RamIO)
 313                                continue;
 314
 315                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 316                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 317
 318                        boardname[serial] = 0;
 319
 320
 321                        printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
 322                               i+1, boardname,
 323                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 324                               (int)(readb(apbs[i].RamIO + VERS) & 0xF));
 325                        
 326                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 327                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 328                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 329
 330                        if (serial != 0)
 331                                printk(" S/N %d\n", serial);
 332                        else
 333                                printk("\n");
 334                }
 335                return 0;
 336        }
 337
 338        else
 339                return -ENXIO;
 340
 341out:
 342        for (i = 0; i < MAX_BOARD; i++) {
 343                if (!apbs[i].RamIO)
 344                        continue;
 345                if (apbs[i].irq)
 346                        free_irq(apbs[i].irq, &dummy);
 347                iounmap(apbs[i].RamIO);
 348        }
 349        return ret;
 350}
 351
 352module_init(applicom_init);
 353module_exit(applicom_exit);
 354
 355
 356static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
 357{
 358        unsigned int NumCard;   /* Board number 1 -> 8           */
 359        unsigned int IndexCard; /* Index board number 0 -> 7     */
 360        unsigned char TicCard;  /* Board TIC to send             */
 361        unsigned long flags;    /* Current priority              */
 362        struct st_ram_io st_loc;
 363        struct mailbox tmpmailbox;
 364#ifdef DEBUG
 365        int c;
 366#endif
 367        DECLARE_WAITQUEUE(wait, current);
 368
 369        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 370                static int warncount = 5;
 371                if (warncount) {
 372                        printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
 373                               count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
 374                        warncount--;
 375                }
 376                return -EINVAL;
 377        }
 378
 379        if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io))) 
 380                return -EFAULT;
 381        
 382        if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
 383                          sizeof(struct mailbox))) 
 384                return -EFAULT;
 385
 386        NumCard = st_loc.num_card;      /* board number to send          */
 387        TicCard = st_loc.tic_des_from_pc;       /* tic number to send            */
 388        IndexCard = NumCard - 1;
 389
 390        if (IndexCard >= MAX_BOARD)
 391                return -EINVAL;
 392        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 393
 394        if (!apbs[IndexCard].RamIO)
 395                return -EINVAL;
 396
 397#ifdef DEBUG
 398        printk("Write to applicom card #%d. struct st_ram_io follows:",
 399               IndexCard+1);
 400
 401                for (c = 0; c < sizeof(struct st_ram_io);) {
 402                
 403                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
 404
 405                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 406                                printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
 407                        }
 408                }
 409
 410                printk("\nstruct mailbox follows:");
 411
 412                for (c = 0; c < sizeof(struct mailbox);) {
 413                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
 414
 415                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 416                                printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
 417                        }
 418                }
 419
 420                printk("\n");
 421#endif
 422
 423        spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 424
 425        /* Test octet ready correct */
 426        if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) { 
 427                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 428                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 429                printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
 430                       IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
 431                DeviceErrorCount++;
 432                return -EIO;
 433        }
 434        
 435        /* Place ourselves on the wait queue */
 436        set_current_state(TASK_INTERRUPTIBLE);
 437        add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 438
 439        /* Check whether the card is ready for us */
 440        while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
 441                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 442                /* It's busy. Sleep. */
 443
 444                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 445                schedule();
 446                if (signal_pending(current)) {
 447                        remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
 448                                          &wait);
 449                        return -EINTR;
 450                }
 451                spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 452                set_current_state(TASK_INTERRUPTIBLE);
 453        }
 454
 455        /* We may not have actually slept */
 456        set_current_state(TASK_RUNNING);
 457        remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 458
 459        writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 460
 461        /* Which is best - lock down the pages with rawio and then
 462           copy directly, or use bounce buffers? For now we do the latter 
 463           because it works with 2.2 still */
 464        {
 465                unsigned char *from = (unsigned char *) &tmpmailbox;
 466                void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
 467                int c;
 468
 469                for (c = 0; c < sizeof(struct mailbox); c++)
 470                        writeb(*(from++), to++);
 471        }
 472
 473        writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
 474        writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
 475        writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
 476        writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 477        writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 478        writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 479        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 480        spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 481        return 0;
 482}
 483
 484static int do_ac_read(int IndexCard, char __user *buf,
 485                struct st_ram_io *st_loc, struct mailbox *mailbox)
 486{
 487        void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
 488        unsigned char *to = (unsigned char *)mailbox;
 489#ifdef DEBUG
 490        int c;
 491#endif
 492
 493        st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
 494        st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 495
 496
 497        {
 498                int c;
 499
 500                for (c = 0; c < sizeof(struct mailbox); c++)
 501                        *(to++) = readb(from++);
 502        }
 503        writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 504        writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
 505        writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 506        writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC), 
 507               apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
 508        writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 509        writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
 510        writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 511        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 512
 513#ifdef DEBUG
 514                printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
 515
 516                for (c = 0; c < sizeof(struct st_ram_io);) {
 517                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
 518
 519                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 520                                printk(" %2.2X", ((unsigned char *)st_loc)[c]);
 521                        }
 522                }
 523
 524                printk("\nstruct mailbox follows:");
 525
 526                for (c = 0; c < sizeof(struct mailbox);) {
 527                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
 528
 529                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 530                                printk(" %2.2X", ((unsigned char *)mailbox)[c]);
 531                        }
 532                }
 533                printk("\n");
 534#endif
 535        return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
 536}
 537
 538static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
 539{
 540        unsigned long flags;
 541        unsigned int i;
 542        unsigned char tmp;
 543        int ret = 0;
 544        DECLARE_WAITQUEUE(wait, current);
 545#ifdef DEBUG
 546        int loopcount=0;
 547#endif
 548        /* No need to ratelimit this. Only root can trigger it anyway */
 549        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 550                printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
 551                        count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
 552                return -EINVAL;
 553        }
 554        
 555        while(1) {
 556                /* Stick ourself on the wait queue */
 557                set_current_state(TASK_INTERRUPTIBLE);
 558                add_wait_queue(&FlagSleepRec, &wait);
 559                
 560                /* Scan each board, looking for one which has a packet for us */
 561                for (i=0; i < MAX_BOARD; i++) {
 562                        if (!apbs[i].RamIO)
 563                                continue;
 564                        spin_lock_irqsave(&apbs[i].mutex, flags);
 565                        
 566                        tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
 567                        
 568                        if (tmp == 2) {
 569                                struct st_ram_io st_loc;
 570                                struct mailbox mailbox;
 571
 572                                /* Got a packet for us */
 573                                memset(&st_loc, 0, sizeof(st_loc));
 574                                ret = do_ac_read(i, buf, &st_loc, &mailbox);
 575                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 576                                set_current_state(TASK_RUNNING);
 577                                remove_wait_queue(&FlagSleepRec, &wait);
 578
 579                                if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
 580                                        return -EFAULT;
 581                                if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
 582                                        return -EFAULT;
 583                                return tmp;
 584                        }
 585                        
 586                        if (tmp > 2) {
 587                                /* Got an error */
 588                                Dummy = readb(apbs[i].RamIO + VERS);
 589                                
 590                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 591                                set_current_state(TASK_RUNNING);
 592                                remove_wait_queue(&FlagSleepRec, &wait);
 593                                
 594                                printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
 595                                       i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 596                                DeviceErrorCount++;
 597                                return -EIO;
 598                        }
 599                        
 600                        /* Nothing for us. Try the next board */
 601                        Dummy = readb(apbs[i].RamIO + VERS);
 602                        spin_unlock_irqrestore(&apbs[i].mutex, flags);
 603                        
 604                } /* per board */
 605
 606                /* OK - No boards had data for us. Sleep now */
 607
 608                schedule();
 609                remove_wait_queue(&FlagSleepRec, &wait);
 610
 611                if (signal_pending(current))
 612                        return -EINTR;
 613
 614#ifdef DEBUG
 615                if (loopcount++ > 2) {
 616                        printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
 617                }
 618#endif
 619        } 
 620}
 621
 622static irqreturn_t ac_interrupt(int vec, void *dev_instance)
 623{
 624        unsigned int i;
 625        unsigned int FlagInt;
 626        unsigned int LoopCount;
 627        int handled = 0;
 628
 629        //    printk("Applicom interrupt on IRQ %d occurred\n", vec);
 630
 631        LoopCount = 0;
 632
 633        do {
 634                FlagInt = 0;
 635                for (i = 0; i < MAX_BOARD; i++) {
 636                        
 637                        /* Skip if this board doesn't exist */
 638                        if (!apbs[i].RamIO)
 639                                continue;
 640
 641                        spin_lock(&apbs[i].mutex);
 642
 643                        /* Skip if this board doesn't want attention */
 644                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
 645                                spin_unlock(&apbs[i].mutex);
 646                                continue;
 647                        }
 648
 649                        handled = 1;
 650                        FlagInt = 1;
 651                        writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
 652
 653                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
 654                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
 655                                       i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 656                                DeviceErrorCount++;
 657                        }
 658
 659                        if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) && 
 660                           (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
 661                                
 662                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
 663                                       i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
 664                                DeviceErrorCount++;
 665                        }
 666
 667                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) {     /* mailbox sent by the card ?   */
 668                                if (waitqueue_active(&FlagSleepRec)) {
 669                                wake_up_interruptible(&FlagSleepRec);
 670                        }
 671                        }
 672
 673                        if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) {   /* ram i/o free for write by pc ? */
 674                                if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ?    */
 675                                        wake_up_interruptible(&apbs[i].FlagSleepSend);
 676                                }
 677                        }
 678                        Dummy = readb(apbs[i].RamIO + VERS);
 679
 680                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
 681                                /* There's another int waiting on this card */
 682                                spin_unlock(&apbs[i].mutex);
 683                                i--;
 684                        } else {
 685                                spin_unlock(&apbs[i].mutex);
 686                        }
 687                }
 688                if (FlagInt)
 689                        LoopCount = 0;
 690                else
 691                        LoopCount++;
 692        } while(LoopCount < 2);
 693        return IRQ_RETVAL(handled);
 694}
 695
 696
 697
 698static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 699     
 700{                               /* @ ADG ou ATO selon le cas */
 701        int i;
 702        unsigned char IndexCard;
 703        void __iomem *pmem;
 704        int ret = 0;
 705        static int warncount = 10;
 706        volatile unsigned char byte_reset_it;
 707        struct st_ram_io *adgl;
 708        void __user *argp = (void __user *)arg;
 709
 710        /* In general, the device is only openable by root anyway, so we're not
 711           particularly concerned that bogus ioctls can flood the console. */
 712
 713        adgl = memdup_user(argp, sizeof(struct st_ram_io));
 714        if (IS_ERR(adgl))
 715                return PTR_ERR(adgl);
 716
 717        mutex_lock(&ac_mutex);  
 718        IndexCard = adgl->num_card-1;
 719         
 720        if (cmd != 6 && IndexCard >= MAX_BOARD)
 721                goto err;
 722        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 723
 724        if (cmd != 6 && !apbs[IndexCard].RamIO)
 725                goto err;
 726
 727        switch (cmd) {
 728                
 729        case 0:
 730                pmem = apbs[IndexCard].RamIO;
 731                for (i = 0; i < sizeof(struct st_ram_io); i++)
 732                        ((unsigned char *)adgl)[i]=readb(pmem++);
 733                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 734                        ret = -EFAULT;
 735                break;
 736        case 1:
 737                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 738                for (i = 0; i < 4; i++)
 739                        adgl->conf_end_test[i] = readb(pmem++);
 740                for (i = 0; i < 2; i++)
 741                        adgl->error_code[i] = readb(pmem++);
 742                for (i = 0; i < 4; i++)
 743                        adgl->parameter_error[i] = readb(pmem++);
 744                pmem = apbs[IndexCard].RamIO + VERS;
 745                adgl->vers = readb(pmem);
 746                pmem = apbs[IndexCard].RamIO + TYPE_CARD;
 747                for (i = 0; i < 20; i++)
 748                        adgl->reserv1[i] = readb(pmem++);
 749                *(int *)&adgl->reserv1[20] =  
 750                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) + 
 751                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) + 
 752                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
 753
 754                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 755                        ret = -EFAULT;
 756                break;
 757        case 2:
 758                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 759                for (i = 0; i < 10; i++)
 760                        writeb(0xff, pmem++);
 761                writeb(adgl->data_from_pc_ready, 
 762                       apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 763
 764                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 765                
 766                for (i = 0; i < MAX_BOARD; i++) {
 767                        if (apbs[i].RamIO) {
 768                                byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
 769                        }
 770                }
 771                break;
 772        case 3:
 773                pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
 774                writeb(adgl->tic_des_from_pc, pmem);
 775                break;
 776        case 4:
 777                pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
 778                adgl->tic_owner_to_pc     = readb(pmem++);
 779                adgl->numcard_owner_to_pc = readb(pmem);
 780                if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
 781                        ret = -EFAULT;
 782                break;
 783        case 5:
 784                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 785                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 786                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 787                writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 788                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 789                break;
 790        case 6:
 791                printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
 792                printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
 793                printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
 794                printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
 795                for (i = 0; i < MAX_BOARD; i++) {
 796                        int serial;
 797                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 798
 799                        if (!apbs[i].RamIO)
 800                                continue;
 801
 802                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 803                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 804                        boardname[serial] = 0;
 805
 806                        printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
 807                               i+1,
 808                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 809                               (int)(readb(apbs[i].RamIO + VERS) & 0xF),
 810                               boardname);
 811
 812
 813                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 814                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 815                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 816
 817                        if (serial != 0)
 818                                printk(" S/N %d\n", serial);
 819                        else
 820                                printk("\n");
 821                }
 822                if (DeviceErrorCount != 0)
 823                        printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
 824                if (ReadErrorCount != 0)
 825                        printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
 826                if (WriteErrorCount != 0)
 827                        printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
 828                if (waitqueue_active(&FlagSleepRec))
 829                        printk(KERN_INFO "Process in read pending\n");
 830                for (i = 0; i < MAX_BOARD; i++) {
 831                        if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
 832                                printk(KERN_INFO "Process in write pending board %d\n",i+1);
 833                }
 834                break;
 835        default:
 836                ret = -ENOTTY;
 837                break;
 838        }
 839        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 840        kfree(adgl);
 841        mutex_unlock(&ac_mutex);
 842        return 0;
 843
 844err:
 845        if (warncount) {
 846                pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
 847                        (int)IndexCard + 1);
 848                warncount--;
 849        }
 850        kfree(adgl);
 851        mutex_unlock(&ac_mutex);
 852        return -EINVAL;
 853
 854}
 855
 856