LXR linux/drivers/gpio/gpio-eic-sprd.c

   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Copyright (C) 2018 Spreadtrum Communications Inc.
   4 * Copyright (C) 2018 Linaro Ltd.
   5 */
   6
   7#include <linux/bitops.h>
   8#include <linux/gpio/driver.h>
   9#include <linux/interrupt.h>
  10#include <linux/kernel.h>
  11#include <linux/module.h>
  12#include <linux/of_device.h>
  13#include <linux/platform_device.h>
  14#include <linux/spinlock.h>
  15
  16/* EIC registers definition */
  17#define SPRD_EIC_DBNC_DATA              0x0
  18#define SPRD_EIC_DBNC_DMSK              0x4
  19#define SPRD_EIC_DBNC_IEV               0x14
  20#define SPRD_EIC_DBNC_IE                0x18
  21#define SPRD_EIC_DBNC_RIS               0x1c
  22#define SPRD_EIC_DBNC_MIS               0x20
  23#define SPRD_EIC_DBNC_IC                0x24
  24#define SPRD_EIC_DBNC_TRIG              0x28
  25#define SPRD_EIC_DBNC_CTRL0             0x40
  26
  27#define SPRD_EIC_LATCH_INTEN            0x0
  28#define SPRD_EIC_LATCH_INTRAW           0x4
  29#define SPRD_EIC_LATCH_INTMSK           0x8
  30#define SPRD_EIC_LATCH_INTCLR           0xc
  31#define SPRD_EIC_LATCH_INTPOL           0x10
  32#define SPRD_EIC_LATCH_INTMODE          0x14
  33
  34#define SPRD_EIC_ASYNC_INTIE            0x0
  35#define SPRD_EIC_ASYNC_INTRAW           0x4
  36#define SPRD_EIC_ASYNC_INTMSK           0x8
  37#define SPRD_EIC_ASYNC_INTCLR           0xc
  38#define SPRD_EIC_ASYNC_INTMODE          0x10
  39#define SPRD_EIC_ASYNC_INTBOTH          0x14
  40#define SPRD_EIC_ASYNC_INTPOL           0x18
  41#define SPRD_EIC_ASYNC_DATA             0x1c
  42
  43#define SPRD_EIC_SYNC_INTIE             0x0
  44#define SPRD_EIC_SYNC_INTRAW            0x4
  45#define SPRD_EIC_SYNC_INTMSK            0x8
  46#define SPRD_EIC_SYNC_INTCLR            0xc
  47#define SPRD_EIC_SYNC_INTMODE           0x10
  48#define SPRD_EIC_SYNC_INTBOTH           0x14
  49#define SPRD_EIC_SYNC_INTPOL            0x18
  50#define SPRD_EIC_SYNC_DATA              0x1c
  51
  52/*
  53 * The digital-chip EIC controller can support maximum 3 banks, and each bank
  54 * contains 8 EICs.
  55 */
  56#define SPRD_EIC_MAX_BANK               3
  57#define SPRD_EIC_PER_BANK_NR            8
  58#define SPRD_EIC_DATA_MASK              GENMASK(7, 0)
  59#define SPRD_EIC_BIT(x)                 ((x) & (SPRD_EIC_PER_BANK_NR - 1))
  60#define SPRD_EIC_DBNC_MASK              GENMASK(11, 0)
  61
  62/*
  63 * The Spreadtrum EIC (external interrupt controller) can be used only in
  64 * input mode to generate interrupts if detecting input signals.
  65 *
  66 * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
  67 * debounce EIC, latch EIC, async EIC and sync EIC,
  68 *
  69 * The debounce EIC is used to capture the input signals' stable status
  70 * (millisecond resolution) and a single-trigger mechanism is introduced
  71 * into this sub-module to enhance the input event detection reliability.
  72 * The debounce range is from 1ms to 4s with a step size of 1ms.
  73 *
  74 * The latch EIC is used to latch some special power down signals and
  75 * generate interrupts, since the latch EIC does not depend on the APB clock
  76 * to capture signals.
  77 *
  78 * The async EIC uses a 32k clock to capture the short signals (microsecond
  79 * resolution) to generate interrupts by level or edge trigger.
  80 *
  81 * The EIC-sync is similar with GPIO's input function, which is a synchronized
  82 * signal input register.
  83 */
  84enum sprd_eic_type {
  85        SPRD_EIC_DEBOUNCE,
  86        SPRD_EIC_LATCH,
  87        SPRD_EIC_ASYNC,
  88        SPRD_EIC_SYNC,
  89        SPRD_EIC_MAX,
  90};
  91
  92struct sprd_eic {
  93        struct gpio_chip chip;
  94        struct irq_chip intc;
  95        void __iomem *base[SPRD_EIC_MAX_BANK];
  96        enum sprd_eic_type type;
  97        spinlock_t lock;
  98        int irq;
  99};
 100
 101struct sprd_eic_variant_data {
 102        enum sprd_eic_type type;
 103        u32 num_eics;
 104};
 105
 106static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
 107        "eic-debounce", "eic-latch", "eic-async",
 108        "eic-sync",
 109};
 110
 111static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
 112        .type = SPRD_EIC_DEBOUNCE,
 113        .num_eics = 8,
 114};
 115
 116static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
 117        .type = SPRD_EIC_LATCH,
 118        .num_eics = 8,
 119};
 120
 121static const struct sprd_eic_variant_data sc9860_eic_async_data = {
 122        .type = SPRD_EIC_ASYNC,
 123        .num_eics = 8,
 124};
 125
 126static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
 127        .type = SPRD_EIC_SYNC,
 128        .num_eics = 8,
 129};
 130
 131static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
 132                                                 unsigned int bank)
 133{
 134        if (bank >= SPRD_EIC_MAX_BANK)
 135                return NULL;
 136
 137        return sprd_eic->base[bank];
 138}
 139
 140static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
 141                            u16 reg, unsigned int val)
 142{
 143        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 144        void __iomem *base =
 145                sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
 146        unsigned long flags;
 147        u32 tmp;
 148
 149        spin_lock_irqsave(&sprd_eic->lock, flags);
 150        tmp = readl_relaxed(base + reg);
 151
 152        if (val)
 153                tmp |= BIT(SPRD_EIC_BIT(offset));
 154        else
 155                tmp &= ~BIT(SPRD_EIC_BIT(offset));
 156
 157        writel_relaxed(tmp, base + reg);
 158        spin_unlock_irqrestore(&sprd_eic->lock, flags);
 159}
 160
 161static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
 162{
 163        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 164        void __iomem *base =
 165                sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
 166
 167        return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
 168}
 169
 170static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
 171{
 172        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
 173        return 0;
 174}
 175
 176static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
 177{
 178        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
 179}
 180
 181static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
 182{
 183        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 184
 185        switch (sprd_eic->type) {
 186        case SPRD_EIC_DEBOUNCE:
 187                return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
 188        case SPRD_EIC_ASYNC:
 189                return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
 190        case SPRD_EIC_SYNC:
 191                return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
 192        default:
 193                return -ENOTSUPP;
 194        }
 195}
 196
 197static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
 198{
 199        /* EICs are always input, nothing need to do here. */
 200        return 0;
 201}
 202
 203static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
 204{
 205        /* EICs are always input, nothing need to do here. */
 206}
 207
 208static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
 209                                 unsigned int debounce)
 210{
 211        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 212        void __iomem *base =
 213                sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
 214        u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
 215        u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
 216
 217        value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
 218        writel_relaxed(value, base + reg);
 219
 220        return 0;
 221}
 222
 223static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
 224                               unsigned long config)
 225{
 226        unsigned long param = pinconf_to_config_param(config);
 227        u32 arg = pinconf_to_config_argument(config);
 228
 229        if (param == PIN_CONFIG_INPUT_DEBOUNCE)
 230                return sprd_eic_set_debounce(chip, offset, arg);
 231
 232        return -ENOTSUPP;
 233}
 234
 235static void sprd_eic_irq_mask(struct irq_data *data)
 236{
 237        struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 238        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 239        u32 offset = irqd_to_hwirq(data);
 240
 241        switch (sprd_eic->type) {
 242        case SPRD_EIC_DEBOUNCE:
 243                sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
 244                sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
 245                break;
 246        case SPRD_EIC_LATCH:
 247                sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
 248                break;
 249        case SPRD_EIC_ASYNC:
 250                sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
 251                break;
 252        case SPRD_EIC_SYNC:
 253                sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
 254                break;
 255        default:
 256                dev_err(chip->parent, "Unsupported EIC type.\n");
 257        }
 258}
 259
 260static void sprd_eic_irq_unmask(struct irq_data *data)
 261{
 262        struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 263        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 264        u32 offset = irqd_to_hwirq(data);
 265
 266        switch (sprd_eic->type) {
 267        case SPRD_EIC_DEBOUNCE:
 268                sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
 269                sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
 270                break;
 271        case SPRD_EIC_LATCH:
 272                sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
 273                break;
 274        case SPRD_EIC_ASYNC:
 275                sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
 276                break;
 277        case SPRD_EIC_SYNC:
 278                sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
 279                break;
 280        default:
 281                dev_err(chip->parent, "Unsupported EIC type.\n");
 282        }
 283}
 284
 285static void sprd_eic_irq_ack(struct irq_data *data)
 286{
 287        struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 288        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 289        u32 offset = irqd_to_hwirq(data);
 290
 291        switch (sprd_eic->type) {
 292        case SPRD_EIC_DEBOUNCE:
 293                sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
 294                break;
 295        case SPRD_EIC_LATCH:
 296                sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
 297                break;
 298        case SPRD_EIC_ASYNC:
 299                sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 300                break;
 301        case SPRD_EIC_SYNC:
 302                sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 303                break;
 304        default:
 305                dev_err(chip->parent, "Unsupported EIC type.\n");
 306        }
 307}
 308
 309static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 310{
 311        struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
 312        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 313        u32 offset = irqd_to_hwirq(data);
 314        int state;
 315
 316        switch (sprd_eic->type) {
 317        case SPRD_EIC_DEBOUNCE:
 318                switch (flow_type) {
 319                case IRQ_TYPE_LEVEL_HIGH:
 320                        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
 321                        break;
 322                case IRQ_TYPE_LEVEL_LOW:
 323                        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
 324                        break;
 325                case IRQ_TYPE_EDGE_RISING:
 326                case IRQ_TYPE_EDGE_FALLING:
 327                case IRQ_TYPE_EDGE_BOTH:
 328                        state = sprd_eic_get(chip, offset);
 329                        if (state)
 330                                sprd_eic_update(chip, offset,
 331                                                SPRD_EIC_DBNC_IEV, 0);
 332                        else
 333                                sprd_eic_update(chip, offset,
 334                                                SPRD_EIC_DBNC_IEV, 1);
 335                        break;
 336                default:
 337                        return -ENOTSUPP;
 338                }
 339
 340                irq_set_handler_locked(data, handle_level_irq);
 341                break;
 342        case SPRD_EIC_LATCH:
 343                switch (flow_type) {
 344                case IRQ_TYPE_LEVEL_HIGH:
 345                        sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
 346                        break;
 347                case IRQ_TYPE_LEVEL_LOW:
 348                        sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
 349                        break;
 350                case IRQ_TYPE_EDGE_RISING:
 351                case IRQ_TYPE_EDGE_FALLING:
 352                case IRQ_TYPE_EDGE_BOTH:
 353                        state = sprd_eic_get(chip, offset);
 354                        if (state)
 355                                sprd_eic_update(chip, offset,
 356                                                SPRD_EIC_LATCH_INTPOL, 0);
 357                        else
 358                                sprd_eic_update(chip, offset,
 359                                                SPRD_EIC_LATCH_INTPOL, 1);
 360                        break;
 361                default:
 362                        return -ENOTSUPP;
 363                }
 364
 365                irq_set_handler_locked(data, handle_level_irq);
 366                break;
 367        case SPRD_EIC_ASYNC:
 368                switch (flow_type) {
 369                case IRQ_TYPE_EDGE_RISING:
 370                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 371                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 372                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
 373                        irq_set_handler_locked(data, handle_edge_irq);
 374                        break;
 375                case IRQ_TYPE_EDGE_FALLING:
 376                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 377                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 378                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
 379                        irq_set_handler_locked(data, handle_edge_irq);
 380                        break;
 381                case IRQ_TYPE_EDGE_BOTH:
 382                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 383                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
 384                        irq_set_handler_locked(data, handle_edge_irq);
 385                        break;
 386                case IRQ_TYPE_LEVEL_HIGH:
 387                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 388                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 389                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
 390                        irq_set_handler_locked(data, handle_level_irq);
 391                        break;
 392                case IRQ_TYPE_LEVEL_LOW:
 393                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 394                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 395                        sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
 396                        irq_set_handler_locked(data, handle_level_irq);
 397                        break;
 398                default:
 399                        return -ENOTSUPP;
 400                }
 401                break;
 402        case SPRD_EIC_SYNC:
 403                switch (flow_type) {
 404                case IRQ_TYPE_EDGE_RISING:
 405                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 406                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 407                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
 408                        irq_set_handler_locked(data, handle_edge_irq);
 409                        break;
 410                case IRQ_TYPE_EDGE_FALLING:
 411                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 412                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 413                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
 414                        irq_set_handler_locked(data, handle_edge_irq);
 415                        break;
 416                case IRQ_TYPE_EDGE_BOTH:
 417                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 418                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
 419                        irq_set_handler_locked(data, handle_edge_irq);
 420                        break;
 421                case IRQ_TYPE_LEVEL_HIGH:
 422                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 423                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 424                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
 425                        irq_set_handler_locked(data, handle_level_irq);
 426                        break;
 427                case IRQ_TYPE_LEVEL_LOW:
 428                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 429                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 430                        sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
 431                        irq_set_handler_locked(data, handle_level_irq);
 432                        break;
 433                default:
 434                        return -ENOTSUPP;
 435                }
 436                break;
 437        default:
 438                dev_err(chip->parent, "Unsupported EIC type.\n");
 439                return -ENOTSUPP;
 440        }
 441
 442        return 0;
 443}
 444
 445static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
 446                                    unsigned int offset)
 447{
 448        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 449        struct irq_data *data = irq_get_irq_data(irq);
 450        u32 trigger = irqd_get_trigger_type(data);
 451        int state, post_state;
 452
 453        /*
 454         * The debounce EIC and latch EIC can only support level trigger, so we
 455         * can toggle the level trigger to emulate the edge trigger.
 456         */
 457        if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
 458             sprd_eic->type != SPRD_EIC_LATCH) ||
 459            !(trigger & IRQ_TYPE_EDGE_BOTH))
 460                return;
 461
 462        sprd_eic_irq_mask(data);
 463        state = sprd_eic_get(chip, offset);
 464
 465retry:
 466        switch (sprd_eic->type) {
 467        case SPRD_EIC_DEBOUNCE:
 468                if (state)
 469                        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
 470                else
 471                        sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
 472                break;
 473        case SPRD_EIC_LATCH:
 474                if (state)
 475                        sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
 476                else
 477                        sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
 478                break;
 479        default:
 480                sprd_eic_irq_unmask(data);
 481                return;
 482        }
 483
 484        post_state = sprd_eic_get(chip, offset);
 485        if (state != post_state) {
 486                dev_warn(chip->parent, "EIC level was changed.\n");
 487                state = post_state;
 488                goto retry;
 489        }
 490
 491        sprd_eic_irq_unmask(data);
 492}
 493
 494static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
 495{
 496        enum sprd_eic_type type = *(enum sprd_eic_type *)data;
 497
 498        return !strcmp(chip->label, sprd_eic_label_name[type]);
 499}
 500
 501static void sprd_eic_handle_one_type(struct gpio_chip *chip)
 502{
 503        struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
 504        u32 bank, n, girq;
 505
 506        for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
 507                void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
 508                unsigned long reg;
 509
 510                switch (sprd_eic->type) {
 511                case SPRD_EIC_DEBOUNCE:
 512                        reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
 513                                SPRD_EIC_DATA_MASK;
 514                        break;
 515                case SPRD_EIC_LATCH:
 516                        reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
 517                                SPRD_EIC_DATA_MASK;
 518                        break;
 519                case SPRD_EIC_ASYNC:
 520                        reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
 521                                SPRD_EIC_DATA_MASK;
 522                        break;
 523                case SPRD_EIC_SYNC:
 524                        reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
 525                                SPRD_EIC_DATA_MASK;
 526                        break;
 527                default:
 528                        dev_err(chip->parent, "Unsupported EIC type.\n");
 529                        return;
 530                }
 531
 532                for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
 533                        u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
 534
 535                        girq = irq_find_mapping(chip->irq.domain, offset);
 536
 537                        generic_handle_irq(girq);
 538                        sprd_eic_toggle_trigger(chip, girq, offset);
 539                }
 540        }
 541}
 542
 543static void sprd_eic_irq_handler(struct irq_desc *desc)
 544{
 545        struct irq_chip *ic = irq_desc_get_chip(desc);
 546        struct gpio_chip *chip;
 547        enum sprd_eic_type type;
 548
 549        chained_irq_enter(ic, desc);
 550
 551        /*
 552         * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
 553         * and sync) share one same interrupt line, we should iterate each
 554         * EIC module to check if there are EIC interrupts were triggered.
 555         */
 556        for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
 557                chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
 558                if (!chip)
 559                        continue;
 560
 561                sprd_eic_handle_one_type(chip);
 562        }
 563
 564        chained_irq_exit(ic, desc);
 565}
 566
 567static int sprd_eic_probe(struct platform_device *pdev)
 568{
 569        const struct sprd_eic_variant_data *pdata;
 570        struct gpio_irq_chip *irq;
 571        struct sprd_eic *sprd_eic;
 572        struct resource *res;
 573        int ret, i;
 574
 575        pdata = of_device_get_match_data(&pdev->dev);
 576        if (!pdata) {
 577                dev_err(&pdev->dev, "No matching driver data found.\n");
 578                return -EINVAL;
 579        }
 580
 581        sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
 582        if (!sprd_eic)
 583                return -ENOMEM;
 584
 585        spin_lock_init(&sprd_eic->lock);
 586        sprd_eic->type = pdata->type;
 587
 588        sprd_eic->irq = platform_get_irq(pdev, 0);
 589        if (sprd_eic->irq < 0)
 590                return sprd_eic->irq;
 591
 592        for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
 593                /*
 594                 * We can have maximum 3 banks EICs, and each EIC has
 595                 * its own base address. But some platform maybe only
 596                 * have one bank EIC, thus base[1] and base[2] can be
 597                 * optional.
 598                 */
 599                res = platform_get_resource(pdev, IORESOURCE_MEM, i);
 600                if (!res)
 601                        continue;
 602
 603                sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
 604                if (IS_ERR(sprd_eic->base[i]))
 605                        return PTR_ERR(sprd_eic->base[i]);
 606        }
 607
 608        sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
 609        sprd_eic->chip.ngpio = pdata->num_eics;
 610        sprd_eic->chip.base = -1;
 611        sprd_eic->chip.parent = &pdev->dev;
 612        sprd_eic->chip.of_node = pdev->dev.of_node;
 613        sprd_eic->chip.direction_input = sprd_eic_direction_input;
 614        switch (sprd_eic->type) {
 615        case SPRD_EIC_DEBOUNCE:
 616                sprd_eic->chip.request = sprd_eic_request;
 617                sprd_eic->chip.free = sprd_eic_free;
 618                sprd_eic->chip.set_config = sprd_eic_set_config;
 619                sprd_eic->chip.set = sprd_eic_set;
 620                fallthrough;
 621        case SPRD_EIC_ASYNC:
 622        case SPRD_EIC_SYNC:
 623                sprd_eic->chip.get = sprd_eic_get;
 624                break;
 625        case SPRD_EIC_LATCH:
 626        default:
 627                break;
 628        }
 629
 630        sprd_eic->intc.name = dev_name(&pdev->dev);
 631        sprd_eic->intc.irq_ack = sprd_eic_irq_ack;
 632        sprd_eic->intc.irq_mask = sprd_eic_irq_mask;
 633        sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask;
 634        sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type;
 635        sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
 636
 637        irq = &sprd_eic->chip.irq;
 638        irq->chip = &sprd_eic->intc;
 639        irq->handler = handle_bad_irq;
 640        irq->default_type = IRQ_TYPE_NONE;
 641        irq->parent_handler = sprd_eic_irq_handler;
 642        irq->parent_handler_data = sprd_eic;
 643        irq->num_parents = 1;
 644        irq->parents = &sprd_eic->irq;
 645
 646        ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
 647        if (ret < 0) {
 648                dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
 649                return ret;
 650        }
 651
 652        platform_set_drvdata(pdev, sprd_eic);
 653        return 0;
 654}
 655
 656static const struct of_device_id sprd_eic_of_match[] = {
 657        {
 658                .compatible = "sprd,sc9860-eic-debounce",
 659                .data = &sc9860_eic_dbnc_data,
 660        },
 661        {
 662                .compatible = "sprd,sc9860-eic-latch",
 663                .data = &sc9860_eic_latch_data,
 664        },
 665        {
 666                .compatible = "sprd,sc9860-eic-async",
 667                .data = &sc9860_eic_async_data,
 668        },
 669        {
 670                .compatible = "sprd,sc9860-eic-sync",
 671                .data = &sc9860_eic_sync_data,
 672        },
 673        {
 674                /* end of list */
 675        }
 676};
 677MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
 678
 679static struct platform_driver sprd_eic_driver = {
 680        .probe = sprd_eic_probe,
 681        .driver = {
 682                .name = "sprd-eic",
 683                .of_match_table = sprd_eic_of_match,
 684        },
 685};
 686
 687module_platform_driver(sprd_eic_driver);
 688
 689MODULE_DESCRIPTION("Spreadtrum EIC driver");
 690MODULE_LICENSE("GPL v2");
 691