linux/drivers/gpu/drm/pl111/pl111_drv.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
   4 *
   5 * Parts of this file were based on sources as follows:
   6 *
   7 * Copyright (c) 2006-2008 Intel Corporation
   8 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
   9 * Copyright (C) 2011 Texas Instruments
  10 */
  11
  12/**
  13 * DOC: ARM PrimeCell PL111 CLCD Driver
  14 *
  15 * The PL111 is a simple LCD controller that can support TFT and STN
  16 * displays.  This driver exposes a standard KMS interface for them.
  17 *
  18 * This driver uses the same Device Tree binding as the fbdev CLCD
  19 * driver.  While the fbdev driver supports panels that may be
  20 * connected to the CLCD internally to the CLCD driver, in DRM the
  21 * panels get split out to drivers/gpu/drm/panels/.  This means that,
  22 * in converting from using fbdev to using DRM, you also need to write
  23 * a panel driver (which may be as simple as an entry in
  24 * panel-simple.c).
  25 *
  26 * The driver currently doesn't expose the cursor.  The DRM API for
  27 * cursors requires support for 64x64 ARGB8888 cursor images, while
  28 * the hardware can only support 64x64 monochrome with masking
  29 * cursors.  While one could imagine trying to hack something together
  30 * to look at the ARGB8888 and program reasonable in monochrome, we
  31 * just don't expose the cursor at all instead, and leave cursor
  32 * support to the X11 software cursor layer.
  33 *
  34 * TODO:
  35 *
  36 * - Fix race between setting plane base address and getting IRQ for
  37 *   vsync firing the pageflip completion.
  38 *
  39 * - Use the "max-memory-bandwidth" DT property to filter the
  40 *   supported formats.
  41 *
  42 * - Read back hardware state at boot to skip reprogramming the
  43 *   hardware when doing a no-op modeset.
  44 *
  45 * - Use the CLKSEL bit to support switching between the two external
  46 *   clock parents.
  47 */
  48
  49#include <linux/amba/bus.h>
  50#include <linux/dma-buf.h>
  51#include <linux/module.h>
  52#include <linux/of.h>
  53#include <linux/of_graph.h>
  54#include <linux/of_reserved_mem.h>
  55#include <linux/shmem_fs.h>
  56#include <linux/slab.h>
  57#include <linux/version.h>
  58
  59#include <drm/drm_atomic_helper.h>
  60#include <drm/drm_bridge.h>
  61#include <drm/drm_drv.h>
  62#include <drm/drm_fb_cma_helper.h>
  63#include <drm/drm_fb_helper.h>
  64#include <drm/drm_gem_cma_helper.h>
  65#include <drm/drm_gem_framebuffer_helper.h>
  66#include <drm/drm_of.h>
  67#include <drm/drm_panel.h>
  68#include <drm/drm_probe_helper.h>
  69#include <drm/drm_vblank.h>
  70
  71#include "pl111_drm.h"
  72#include "pl111_versatile.h"
  73#include "pl111_nomadik.h"
  74
  75#define DRIVER_DESC      "DRM module for PL111"
  76
  77static const struct drm_mode_config_funcs mode_config_funcs = {
  78        .fb_create = drm_gem_fb_create,
  79        .atomic_check = drm_atomic_helper_check,
  80        .atomic_commit = drm_atomic_helper_commit,
  81};
  82
  83static int pl111_modeset_init(struct drm_device *dev)
  84{
  85        struct drm_mode_config *mode_config;
  86        struct pl111_drm_dev_private *priv = dev->dev_private;
  87        struct device_node *np = dev->dev->of_node;
  88        struct device_node *remote;
  89        struct drm_panel *panel = NULL;
  90        struct drm_bridge *bridge = NULL;
  91        bool defer = false;
  92        int ret;
  93        int i;
  94
  95        ret = drmm_mode_config_init(dev);
  96        if (ret)
  97                return ret;
  98
  99        mode_config = &dev->mode_config;
 100        mode_config->funcs = &mode_config_funcs;
 101        mode_config->min_width = 1;
 102        mode_config->max_width = 1024;
 103        mode_config->min_height = 1;
 104        mode_config->max_height = 768;
 105
 106        i = 0;
 107        for_each_endpoint_of_node(np, remote) {
 108                struct drm_panel *tmp_panel;
 109                struct drm_bridge *tmp_bridge;
 110
 111                dev_dbg(dev->dev, "checking endpoint %d\n", i);
 112
 113                ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
 114                                                  0, i,
 115                                                  &tmp_panel,
 116                                                  &tmp_bridge);
 117                if (ret) {
 118                        if (ret == -EPROBE_DEFER) {
 119                                /*
 120                                 * Something deferred, but that is often just
 121                                 * another way of saying -ENODEV, but let's
 122                                 * cast a vote for later deferral.
 123                                 */
 124                                defer = true;
 125                        } else if (ret != -ENODEV) {
 126                                /* Continue, maybe something else is working */
 127                                dev_err(dev->dev,
 128                                        "endpoint %d returns %d\n", i, ret);
 129                        }
 130                }
 131
 132                if (tmp_panel) {
 133                        dev_info(dev->dev,
 134                                 "found panel on endpoint %d\n", i);
 135                        panel = tmp_panel;
 136                }
 137                if (tmp_bridge) {
 138                        dev_info(dev->dev,
 139                                 "found bridge on endpoint %d\n", i);
 140                        bridge = tmp_bridge;
 141                }
 142
 143                i++;
 144        }
 145
 146        /*
 147         * If we can't find neither panel nor bridge on any of the
 148         * endpoints, and any of them retured -EPROBE_DEFER, then
 149         * let's defer this driver too.
 150         */
 151        if ((!panel && !bridge) && defer)
 152                return -EPROBE_DEFER;
 153
 154        if (panel) {
 155                bridge = drm_panel_bridge_add_typed(panel,
 156                                                    DRM_MODE_CONNECTOR_Unknown);
 157                if (IS_ERR(bridge)) {
 158                        ret = PTR_ERR(bridge);
 159                        goto finish;
 160                }
 161        } else if (bridge) {
 162                dev_info(dev->dev, "Using non-panel bridge\n");
 163        } else {
 164                dev_err(dev->dev, "No bridge, exiting\n");
 165                return -ENODEV;
 166        }
 167
 168        priv->bridge = bridge;
 169        if (panel) {
 170                priv->panel = panel;
 171                priv->connector = drm_panel_bridge_connector(bridge);
 172        }
 173
 174        ret = pl111_display_init(dev);
 175        if (ret != 0) {
 176                dev_err(dev->dev, "Failed to init display\n");
 177                goto out_bridge;
 178        }
 179
 180        ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
 181                                                    bridge);
 182        if (ret)
 183                return ret;
 184
 185        if (!priv->variant->broken_vblank) {
 186                ret = drm_vblank_init(dev, 1);
 187                if (ret != 0) {
 188                        dev_err(dev->dev, "Failed to init vblank\n");
 189                        goto out_bridge;
 190                }
 191        }
 192
 193        drm_mode_config_reset(dev);
 194
 195        drm_kms_helper_poll_init(dev);
 196
 197        goto finish;
 198
 199out_bridge:
 200        if (panel)
 201                drm_panel_bridge_remove(bridge);
 202finish:
 203        return ret;
 204}
 205
 206static struct drm_gem_object *
 207pl111_gem_import_sg_table(struct drm_device *dev,
 208                          struct dma_buf_attachment *attach,
 209                          struct sg_table *sgt)
 210{
 211        struct pl111_drm_dev_private *priv = dev->dev_private;
 212
 213        /*
 214         * When using device-specific reserved memory we can't import
 215         * DMA buffers: those are passed by reference in any global
 216         * memory and we can only handle a specific range of memory.
 217         */
 218        if (priv->use_device_memory)
 219                return ERR_PTR(-EINVAL);
 220
 221        return drm_gem_cma_prime_import_sg_table(dev, attach, sgt);
 222}
 223
 224DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
 225
 226static struct drm_driver pl111_drm_driver = {
 227        .driver_features =
 228                DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
 229        .ioctls = NULL,
 230        .fops = &drm_fops,
 231        .name = "pl111",
 232        .desc = DRIVER_DESC,
 233        .date = "20170317",
 234        .major = 1,
 235        .minor = 0,
 236        .patchlevel = 0,
 237        .dumb_create = drm_gem_cma_dumb_create,
 238        .gem_free_object_unlocked = drm_gem_cma_free_object,
 239        .gem_vm_ops = &drm_gem_cma_vm_ops,
 240        .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
 241        .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
 242        .gem_prime_import_sg_table = pl111_gem_import_sg_table,
 243        .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
 244        .gem_prime_mmap = drm_gem_cma_prime_mmap,
 245        .gem_prime_vmap = drm_gem_cma_prime_vmap,
 246
 247#if defined(CONFIG_DEBUG_FS)
 248        .debugfs_init = pl111_debugfs_init,
 249#endif
 250};
 251
 252static int pl111_amba_probe(struct amba_device *amba_dev,
 253                            const struct amba_id *id)
 254{
 255        struct device *dev = &amba_dev->dev;
 256        struct pl111_drm_dev_private *priv;
 257        const struct pl111_variant_data *variant = id->data;
 258        struct drm_device *drm;
 259        int ret;
 260
 261        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 262        if (!priv)
 263                return -ENOMEM;
 264
 265        drm = drm_dev_alloc(&pl111_drm_driver, dev);
 266        if (IS_ERR(drm))
 267                return PTR_ERR(drm);
 268        amba_set_drvdata(amba_dev, drm);
 269        priv->drm = drm;
 270        drm->dev_private = priv;
 271        priv->variant = variant;
 272
 273        ret = of_reserved_mem_device_init(dev);
 274        if (!ret) {
 275                dev_info(dev, "using device-specific reserved memory\n");
 276                priv->use_device_memory = true;
 277        }
 278
 279        if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
 280                                 &priv->memory_bw)) {
 281                dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
 282                priv->memory_bw = 0;
 283        }
 284
 285        /* The two main variants swap this register */
 286        if (variant->is_pl110 || variant->is_lcdc) {
 287                priv->ienb = CLCD_PL110_IENB;
 288                priv->ctrl = CLCD_PL110_CNTL;
 289        } else {
 290                priv->ienb = CLCD_PL111_IENB;
 291                priv->ctrl = CLCD_PL111_CNTL;
 292        }
 293
 294        priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
 295        if (IS_ERR(priv->regs)) {
 296                dev_err(dev, "%s failed mmio\n", __func__);
 297                ret = PTR_ERR(priv->regs);
 298                goto dev_put;
 299        }
 300
 301        /* This may override some variant settings */
 302        ret = pl111_versatile_init(dev, priv);
 303        if (ret)
 304                goto dev_put;
 305
 306        pl111_nomadik_init(dev);
 307
 308        /* turn off interrupts before requesting the irq */
 309        writel(0, priv->regs + priv->ienb);
 310
 311        ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
 312                               variant->name, priv);
 313        if (ret != 0) {
 314                dev_err(dev, "%s failed irq %d\n", __func__, ret);
 315                return ret;
 316        }
 317
 318        ret = pl111_modeset_init(drm);
 319        if (ret != 0)
 320                goto dev_put;
 321
 322        ret = drm_dev_register(drm, 0);
 323        if (ret < 0)
 324                goto dev_put;
 325
 326        drm_fbdev_generic_setup(drm, priv->variant->fb_bpp);
 327
 328        return 0;
 329
 330dev_put:
 331        drm_dev_put(drm);
 332        of_reserved_mem_device_release(dev);
 333
 334        return ret;
 335}
 336
 337static int pl111_amba_remove(struct amba_device *amba_dev)
 338{
 339        struct device *dev = &amba_dev->dev;
 340        struct drm_device *drm = amba_get_drvdata(amba_dev);
 341        struct pl111_drm_dev_private *priv = drm->dev_private;
 342
 343        drm_dev_unregister(drm);
 344        if (priv->panel)
 345                drm_panel_bridge_remove(priv->bridge);
 346        drm_dev_put(drm);
 347        of_reserved_mem_device_release(dev);
 348
 349        return 0;
 350}
 351
 352/*
 353 * This early variant lacks the 565 and 444 pixel formats.
 354 */
 355static const u32 pl110_pixel_formats[] = {
 356        DRM_FORMAT_ABGR8888,
 357        DRM_FORMAT_XBGR8888,
 358        DRM_FORMAT_ARGB8888,
 359        DRM_FORMAT_XRGB8888,
 360        DRM_FORMAT_ABGR1555,
 361        DRM_FORMAT_XBGR1555,
 362        DRM_FORMAT_ARGB1555,
 363        DRM_FORMAT_XRGB1555,
 364};
 365
 366static const struct pl111_variant_data pl110_variant = {
 367        .name = "PL110",
 368        .is_pl110 = true,
 369        .formats = pl110_pixel_formats,
 370        .nformats = ARRAY_SIZE(pl110_pixel_formats),
 371        .fb_bpp = 16,
 372};
 373
 374/* RealView, Versatile Express etc use this modern variant */
 375static const u32 pl111_pixel_formats[] = {
 376        DRM_FORMAT_ABGR8888,
 377        DRM_FORMAT_XBGR8888,
 378        DRM_FORMAT_ARGB8888,
 379        DRM_FORMAT_XRGB8888,
 380        DRM_FORMAT_BGR565,
 381        DRM_FORMAT_RGB565,
 382        DRM_FORMAT_ABGR1555,
 383        DRM_FORMAT_XBGR1555,
 384        DRM_FORMAT_ARGB1555,
 385        DRM_FORMAT_XRGB1555,
 386        DRM_FORMAT_ABGR4444,
 387        DRM_FORMAT_XBGR4444,
 388        DRM_FORMAT_ARGB4444,
 389        DRM_FORMAT_XRGB4444,
 390};
 391
 392static const struct pl111_variant_data pl111_variant = {
 393        .name = "PL111",
 394        .formats = pl111_pixel_formats,
 395        .nformats = ARRAY_SIZE(pl111_pixel_formats),
 396        .fb_bpp = 32,
 397};
 398
 399static const u32 pl110_nomadik_pixel_formats[] = {
 400        DRM_FORMAT_RGB888,
 401        DRM_FORMAT_BGR888,
 402        DRM_FORMAT_ABGR8888,
 403        DRM_FORMAT_XBGR8888,
 404        DRM_FORMAT_ARGB8888,
 405        DRM_FORMAT_XRGB8888,
 406        DRM_FORMAT_BGR565,
 407        DRM_FORMAT_RGB565,
 408        DRM_FORMAT_ABGR1555,
 409        DRM_FORMAT_XBGR1555,
 410        DRM_FORMAT_ARGB1555,
 411        DRM_FORMAT_XRGB1555,
 412        DRM_FORMAT_ABGR4444,
 413        DRM_FORMAT_XBGR4444,
 414        DRM_FORMAT_ARGB4444,
 415        DRM_FORMAT_XRGB4444,
 416};
 417
 418static const struct pl111_variant_data pl110_nomadik_variant = {
 419        .name = "LCDC (PL110 Nomadik)",
 420        .formats = pl110_nomadik_pixel_formats,
 421        .nformats = ARRAY_SIZE(pl110_nomadik_pixel_formats),
 422        .is_lcdc = true,
 423        .st_bitmux_control = true,
 424        .broken_vblank = true,
 425        .fb_bpp = 16,
 426};
 427
 428static const struct amba_id pl111_id_table[] = {
 429        {
 430                .id = 0x00041110,
 431                .mask = 0x000fffff,
 432                .data = (void *)&pl110_variant,
 433        },
 434        {
 435                .id = 0x00180110,
 436                .mask = 0x00fffffe,
 437                .data = (void *)&pl110_nomadik_variant,
 438        },
 439        {
 440                .id = 0x00041111,
 441                .mask = 0x000fffff,
 442                .data = (void *)&pl111_variant,
 443        },
 444        {0, 0},
 445};
 446MODULE_DEVICE_TABLE(amba, pl111_id_table);
 447
 448static struct amba_driver pl111_amba_driver __maybe_unused = {
 449        .drv = {
 450                .name = "drm-clcd-pl111",
 451        },
 452        .probe = pl111_amba_probe,
 453        .remove = pl111_amba_remove,
 454        .id_table = pl111_id_table,
 455};
 456
 457#ifdef CONFIG_ARM_AMBA
 458module_amba_driver(pl111_amba_driver);
 459#endif
 460
 461MODULE_DESCRIPTION(DRIVER_DESC);
 462MODULE_AUTHOR("ARM Ltd.");
 463MODULE_LICENSE("GPL");
 464