linux/drivers/mfd/tps80031.c
<<
>>
Prefs
   1/*
   2 * tps80031.c -- TI TPS80031/TPS80032 mfd core driver.
   3 *
   4 * MFD core driver for TI TPS80031/TPS80032 Fully Integrated
   5 * Power Management with Power Path and Battery Charger
   6 *
   7 * Copyright (c) 2012, NVIDIA Corporation.
   8 *
   9 * Author: Laxman Dewangan <ldewangan@nvidia.com>
  10 *
  11 * This program is free software; you can redistribute it and/or
  12 * modify it under the terms of the GNU General Public License as
  13 * published by the Free Software Foundation version 2.
  14 *
  15 * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
  16 * whether express or implied; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18 * General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License
  21 * along with this program; if not, write to the Free Software
  22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  23 * 02111-1307, USA
  24 */
  25
  26#include <linux/err.h>
  27#include <linux/i2c.h>
  28#include <linux/init.h>
  29#include <linux/interrupt.h>
  30#include <linux/irq.h>
  31#include <linux/mfd/core.h>
  32#include <linux/mfd/tps80031.h>
  33#include <linux/pm.h>
  34#include <linux/regmap.h>
  35#include <linux/slab.h>
  36
  37static struct resource tps80031_rtc_resources[] = {
  38        {
  39                .start = TPS80031_INT_RTC_ALARM,
  40                .end = TPS80031_INT_RTC_ALARM,
  41                .flags = IORESOURCE_IRQ,
  42        },
  43};
  44
  45/* TPS80031 sub mfd devices */
  46static const struct mfd_cell tps80031_cell[] = {
  47        {
  48                .name = "tps80031-pmic",
  49        },
  50        {
  51                .name = "tps80031-clock",
  52        },
  53        {
  54                .name = "tps80031-rtc",
  55                .num_resources = ARRAY_SIZE(tps80031_rtc_resources),
  56                .resources = tps80031_rtc_resources,
  57        },
  58        {
  59                .name = "tps80031-gpadc",
  60        },
  61        {
  62                .name = "tps80031-fuel-gauge",
  63        },
  64        {
  65                .name = "tps80031-charger",
  66        },
  67};
  68
  69static int tps80031_slave_address[TPS80031_NUM_SLAVES] = {
  70        TPS80031_I2C_ID0_ADDR,
  71        TPS80031_I2C_ID1_ADDR,
  72        TPS80031_I2C_ID2_ADDR,
  73        TPS80031_I2C_ID3_ADDR,
  74};
  75
  76struct tps80031_pupd_data {
  77        u8      reg;
  78        u8      pullup_bit;
  79        u8      pulldown_bit;
  80};
  81
  82#define TPS80031_IRQ(_reg, _mask)                       \
  83        {                                                       \
  84                .reg_offset = (TPS80031_INT_MSK_LINE_##_reg) -  \
  85                                TPS80031_INT_MSK_LINE_A,        \
  86                .mask = BIT(_mask),                             \
  87        }
  88
  89static const struct regmap_irq tps80031_main_irqs[] = {
  90        [TPS80031_INT_PWRON]            = TPS80031_IRQ(A, 0),
  91        [TPS80031_INT_RPWRON]           = TPS80031_IRQ(A, 1),
  92        [TPS80031_INT_SYS_VLOW]         = TPS80031_IRQ(A, 2),
  93        [TPS80031_INT_RTC_ALARM]        = TPS80031_IRQ(A, 3),
  94        [TPS80031_INT_RTC_PERIOD]       = TPS80031_IRQ(A, 4),
  95        [TPS80031_INT_HOT_DIE]          = TPS80031_IRQ(A, 5),
  96        [TPS80031_INT_VXX_SHORT]        = TPS80031_IRQ(A, 6),
  97        [TPS80031_INT_SPDURATION]       = TPS80031_IRQ(A, 7),
  98        [TPS80031_INT_WATCHDOG]         = TPS80031_IRQ(B, 0),
  99        [TPS80031_INT_BAT]              = TPS80031_IRQ(B, 1),
 100        [TPS80031_INT_SIM]              = TPS80031_IRQ(B, 2),
 101        [TPS80031_INT_MMC]              = TPS80031_IRQ(B, 3),
 102        [TPS80031_INT_RES]              = TPS80031_IRQ(B, 4),
 103        [TPS80031_INT_GPADC_RT]         = TPS80031_IRQ(B, 5),
 104        [TPS80031_INT_GPADC_SW2_EOC]    = TPS80031_IRQ(B, 6),
 105        [TPS80031_INT_CC_AUTOCAL]       = TPS80031_IRQ(B, 7),
 106        [TPS80031_INT_ID_WKUP]          = TPS80031_IRQ(C, 0),
 107        [TPS80031_INT_VBUSS_WKUP]       = TPS80031_IRQ(C, 1),
 108        [TPS80031_INT_ID]               = TPS80031_IRQ(C, 2),
 109        [TPS80031_INT_VBUS]             = TPS80031_IRQ(C, 3),
 110        [TPS80031_INT_CHRG_CTRL]        = TPS80031_IRQ(C, 4),
 111        [TPS80031_INT_EXT_CHRG]         = TPS80031_IRQ(C, 5),
 112        [TPS80031_INT_INT_CHRG]         = TPS80031_IRQ(C, 6),
 113        [TPS80031_INT_RES2]             = TPS80031_IRQ(C, 7),
 114};
 115
 116static struct regmap_irq_chip tps80031_irq_chip = {
 117        .name = "tps80031",
 118        .irqs = tps80031_main_irqs,
 119        .num_irqs = ARRAY_SIZE(tps80031_main_irqs),
 120        .num_regs = 3,
 121        .status_base = TPS80031_INT_STS_A,
 122        .mask_base = TPS80031_INT_MSK_LINE_A,
 123};
 124
 125#define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit)     \
 126        {                                               \
 127                .reg = TPS80031_CFG_INPUT_PUPD##_reg,   \
 128                .pulldown_bit = _pulldown_bit,          \
 129                .pullup_bit = _pullup_bit,              \
 130        }
 131
 132static const struct tps80031_pupd_data tps80031_pupds[] = {
 133        [TPS80031_PREQ1]                = PUPD_DATA(1, BIT(0),  BIT(1)),
 134        [TPS80031_PREQ2A]               = PUPD_DATA(1, BIT(2),  BIT(3)),
 135        [TPS80031_PREQ2B]               = PUPD_DATA(1, BIT(4),  BIT(5)),
 136        [TPS80031_PREQ2C]               = PUPD_DATA(1, BIT(6),  BIT(7)),
 137        [TPS80031_PREQ3]                = PUPD_DATA(2, BIT(0),  BIT(1)),
 138        [TPS80031_NRES_WARM]            = PUPD_DATA(2, 0,       BIT(2)),
 139        [TPS80031_PWM_FORCE]            = PUPD_DATA(2, BIT(5),  0),
 140        [TPS80031_CHRG_EXT_CHRG_STATZ]  = PUPD_DATA(2, 0,       BIT(6)),
 141        [TPS80031_SIM]                  = PUPD_DATA(3, BIT(0),  BIT(1)),
 142        [TPS80031_MMC]                  = PUPD_DATA(3, BIT(2),  BIT(3)),
 143        [TPS80031_GPADC_START]          = PUPD_DATA(3, BIT(4),  0),
 144        [TPS80031_DVSI2C_SCL]           = PUPD_DATA(4, 0,       BIT(0)),
 145        [TPS80031_DVSI2C_SDA]           = PUPD_DATA(4, 0,       BIT(1)),
 146        [TPS80031_CTLI2C_SCL]           = PUPD_DATA(4, 0,       BIT(2)),
 147        [TPS80031_CTLI2C_SDA]           = PUPD_DATA(4, 0,       BIT(3)),
 148};
 149static struct tps80031 *tps80031_power_off_dev;
 150
 151int tps80031_ext_power_req_config(struct device *dev,
 152                unsigned long ext_ctrl_flag, int preq_bit,
 153                int state_reg_add, int trans_reg_add)
 154{
 155        u8 res_ass_reg = 0;
 156        int preq_mask_bit = 0;
 157        int ret;
 158
 159        if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ))
 160                return 0;
 161
 162        if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) {
 163                res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3);
 164                preq_mask_bit = 5;
 165        } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) {
 166                res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3);
 167                preq_mask_bit = 6;
 168        } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) {
 169                res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3);
 170                preq_mask_bit = 7;
 171        }
 172
 173        /* Configure REQ_ASS registers */
 174        ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg,
 175                                        BIT(preq_bit & 0x7));
 176        if (ret < 0) {
 177                dev_err(dev, "reg 0x%02x setbit failed, err = %d\n",
 178                                res_ass_reg, ret);
 179                return ret;
 180        }
 181
 182        /* Unmask the PREQ */
 183        ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1,
 184                        TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit));
 185        if (ret < 0) {
 186                dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n",
 187                        TPS80031_PHOENIX_MSK_TRANSITION, ret);
 188                return ret;
 189        }
 190
 191        /* Switch regulator control to resource now */
 192        if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 |
 193                                        TPS80031_PWR_REQ_INPUT_PREQ3)) {
 194                ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add,
 195                                                0x0, TPS80031_STATE_MASK);
 196                if (ret < 0)
 197                        dev_err(dev, "reg 0x%02x update failed, err = %d\n",
 198                                state_reg_add, ret);
 199        } else {
 200                ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add,
 201                                TPS80031_TRANS_SLEEP_OFF,
 202                                TPS80031_TRANS_SLEEP_MASK);
 203                if (ret < 0)
 204                        dev_err(dev, "reg 0x%02x update failed, err = %d\n",
 205                                trans_reg_add, ret);
 206        }
 207        return ret;
 208}
 209EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
 210
 211static void tps80031_power_off(void)
 212{
 213        dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
 214        tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
 215                                TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
 216}
 217
 218static void tps80031_pupd_init(struct tps80031 *tps80031,
 219                               struct tps80031_platform_data *pdata)
 220{
 221        struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data;
 222        int data_size = pdata->pupd_init_data_size;
 223        int i;
 224
 225        for (i = 0; i < data_size; ++i) {
 226                struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i];
 227                const struct tps80031_pupd_data *pupd =
 228                        &tps80031_pupds[pupd_init->input_pin];
 229                u8 update_value = 0;
 230                u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit;
 231
 232                if (pupd_init->setting == TPS80031_PUPD_PULLDOWN)
 233                        update_value = pupd->pulldown_bit;
 234                else if (pupd_init->setting == TPS80031_PUPD_PULLUP)
 235                        update_value = pupd->pullup_bit;
 236
 237                tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg,
 238                                update_value, update_mask);
 239        }
 240}
 241
 242static int tps80031_init_ext_control(struct tps80031 *tps80031,
 243                        struct tps80031_platform_data *pdata)
 244{
 245        struct device *dev = tps80031->dev;
 246        int ret;
 247        int i;
 248
 249        /* Clear all external control for this rail */
 250        for (i = 0; i < 9; ++i) {
 251                ret = tps80031_write(dev, TPS80031_SLAVE_ID1,
 252                                TPS80031_PREQ1_RES_ASS_A + i, 0);
 253                if (ret < 0) {
 254                        dev_err(dev, "reg 0x%02x write failed, err = %d\n",
 255                                TPS80031_PREQ1_RES_ASS_A + i, ret);
 256                        return ret;
 257                }
 258        }
 259
 260        /* Mask the PREQ */
 261        ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1,
 262                        TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5);
 263        if (ret < 0) {
 264                dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n",
 265                        TPS80031_PHOENIX_MSK_TRANSITION, ret);
 266                return ret;
 267        }
 268        return ret;
 269}
 270
 271static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base)
 272{
 273        struct device *dev = tps80031->dev;
 274        int i, ret;
 275
 276        /*
 277         * The MASK register used for updating status register when
 278         * interrupt occurs and LINE register used to pass the status
 279         * to actual interrupt line.  As per datasheet:
 280         * When INT_MSK_LINE [i] is set to 1, the associated interrupt
 281         * number i is INT line masked, which means that no interrupt is
 282         * generated on the INT line.
 283         * When INT_MSK_LINE [i] is set to 0, the associated interrupt
 284         * number i is  line enabled: An interrupt is generated on the
 285         * INT line.
 286         * In any case, the INT_STS [i] status bit may or may not be updated,
 287         * only linked to the INT_MSK_STS [i] configuration register bit.
 288         *
 289         * When INT_MSK_STS [i] is set to 1, the associated interrupt number
 290         * i is status masked, which means that no interrupt is stored in
 291         * the INT_STS[i] status bit. Note that no interrupt number i is
 292         * generated on the INT line, even if the INT_MSK_LINE [i] register
 293         * bit is set to 0.
 294         * When INT_MSK_STS [i] is set to 0, the associated interrupt number i
 295         * is status enabled: An interrupt status is updated in the INT_STS [i]
 296         * register. The interrupt may or may not be generated on the INT line,
 297         * depending on the INT_MSK_LINE [i] configuration register bit.
 298         */
 299        for (i = 0; i < 3; i++)
 300                tps80031_write(dev, TPS80031_SLAVE_ID2,
 301                                TPS80031_INT_MSK_STS_A + i, 0x00);
 302
 303        ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq,
 304                        IRQF_ONESHOT, irq_base,
 305                        &tps80031_irq_chip, &tps80031->irq_data);
 306        if (ret < 0) {
 307                dev_err(dev, "add irq failed, err = %d\n", ret);
 308                return ret;
 309        }
 310        return ret;
 311}
 312
 313static bool rd_wr_reg_id0(struct device *dev, unsigned int reg)
 314{
 315        switch (reg) {
 316        case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE:
 317                return true;
 318        default:
 319                return false;
 320        }
 321}
 322
 323static bool rd_wr_reg_id1(struct device *dev, unsigned int reg)
 324{
 325        switch (reg) {
 326        case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG:
 327        case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7:
 328        case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG:
 329        case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
 330        case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST:
 331        case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
 332        case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
 333        case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
 334        case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
 335        case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
 336        case TPS80031_BACKUP_REG:
 337                return true;
 338        default:
 339                return false;
 340        }
 341}
 342
 343static bool is_volatile_reg_id1(struct device *dev, unsigned int reg)
 344{
 345        switch (reg) {
 346        case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
 347        case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
 348        case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
 349        case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
 350        case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
 351        case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
 352                return true;
 353        default:
 354                return false;
 355        }
 356}
 357
 358static bool rd_wr_reg_id2(struct device *dev, unsigned int reg)
 359{
 360        switch (reg) {
 361        case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION:
 362        case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1:
 363        case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB:
 364        case TPS80031_TOGGLE1 ... TPS80031_VIBMODE:
 365        case TPS80031_PWM1ON ... TPS80031_PWM2OFF:
 366        case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11:
 367        case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C:
 368        case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2:
 369                return true;
 370        default:
 371                return false;
 372        }
 373}
 374
 375static bool rd_wr_reg_id3(struct device *dev, unsigned int reg)
 376{
 377        switch (reg) {
 378        case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18:
 379                return true;
 380        default:
 381                return false;
 382        }
 383}
 384
 385static const struct regmap_config tps80031_regmap_configs[] = {
 386        {
 387                .reg_bits = 8,
 388                .val_bits = 8,
 389                .writeable_reg = rd_wr_reg_id0,
 390                .readable_reg = rd_wr_reg_id0,
 391                .max_register = TPS80031_MAX_REGISTER,
 392        },
 393        {
 394                .reg_bits = 8,
 395                .val_bits = 8,
 396                .writeable_reg = rd_wr_reg_id1,
 397                .readable_reg = rd_wr_reg_id1,
 398                .volatile_reg = is_volatile_reg_id1,
 399                .max_register = TPS80031_MAX_REGISTER,
 400        },
 401        {
 402                .reg_bits = 8,
 403                .val_bits = 8,
 404                .writeable_reg = rd_wr_reg_id2,
 405                .readable_reg = rd_wr_reg_id2,
 406                .max_register = TPS80031_MAX_REGISTER,
 407        },
 408        {
 409                .reg_bits = 8,
 410                .val_bits = 8,
 411                .writeable_reg = rd_wr_reg_id3,
 412                .readable_reg = rd_wr_reg_id3,
 413                .max_register = TPS80031_MAX_REGISTER,
 414        },
 415};
 416
 417static int tps80031_probe(struct i2c_client *client,
 418                          const struct i2c_device_id *id)
 419{
 420        struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev);
 421        struct tps80031 *tps80031;
 422        int ret;
 423        uint8_t es_version;
 424        uint8_t ep_ver;
 425        int i;
 426
 427        if (!pdata) {
 428                dev_err(&client->dev, "tps80031 requires platform data\n");
 429                return -EINVAL;
 430        }
 431
 432        tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
 433        if (!tps80031)
 434                return -ENOMEM;
 435
 436        for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
 437                if (tps80031_slave_address[i] == client->addr)
 438                        tps80031->clients[i] = client;
 439                else
 440                        tps80031->clients[i] = devm_i2c_new_dummy_device(&client->dev,
 441                                                client->adapter, tps80031_slave_address[i]);
 442                if (IS_ERR(tps80031->clients[i])) {
 443                        dev_err(&client->dev, "can't attach client %d\n", i);
 444                        return PTR_ERR(tps80031->clients[i]);
 445                }
 446
 447                i2c_set_clientdata(tps80031->clients[i], tps80031);
 448                tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
 449                                        &tps80031_regmap_configs[i]);
 450                if (IS_ERR(tps80031->regmap[i])) {
 451                        ret = PTR_ERR(tps80031->regmap[i]);
 452                        dev_err(&client->dev,
 453                                "regmap %d init failed, err %d\n", i, ret);
 454                        return ret;
 455                }
 456        }
 457
 458        ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
 459                        TPS80031_JTAGVERNUM, &es_version);
 460        if (ret < 0) {
 461                dev_err(&client->dev,
 462                        "Silicon version number read failed: %d\n", ret);
 463                return ret;
 464        }
 465
 466        ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
 467                        TPS80031_EPROM_REV, &ep_ver);
 468        if (ret < 0) {
 469                dev_err(&client->dev,
 470                        "Silicon eeprom version read failed: %d\n", ret);
 471                return ret;
 472        }
 473
 474        dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
 475                                        es_version, ep_ver);
 476        tps80031->es_version = es_version;
 477        tps80031->dev = &client->dev;
 478        i2c_set_clientdata(client, tps80031);
 479        tps80031->chip_info = id->driver_data;
 480
 481        ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
 482        if (ret) {
 483                dev_err(&client->dev, "IRQ init failed: %d\n", ret);
 484                return ret;
 485        }
 486
 487        tps80031_pupd_init(tps80031, pdata);
 488
 489        tps80031_init_ext_control(tps80031, pdata);
 490
 491        ret = mfd_add_devices(tps80031->dev, -1,
 492                        tps80031_cell, ARRAY_SIZE(tps80031_cell),
 493                        NULL, 0,
 494                        regmap_irq_get_domain(tps80031->irq_data));
 495        if (ret < 0) {
 496                dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
 497                goto fail_mfd_add;
 498        }
 499
 500        if (pdata->use_power_off && !pm_power_off) {
 501                tps80031_power_off_dev = tps80031;
 502                pm_power_off = tps80031_power_off;
 503        }
 504        return 0;
 505
 506fail_mfd_add:
 507        regmap_del_irq_chip(client->irq, tps80031->irq_data);
 508        return ret;
 509}
 510
 511static const struct i2c_device_id tps80031_id_table[] = {
 512        { "tps80031", TPS80031 },
 513        { "tps80032", TPS80032 },
 514        { }
 515};
 516
 517static struct i2c_driver tps80031_driver = {
 518        .driver = {
 519                .name                   = "tps80031",
 520                .suppress_bind_attrs    = true,
 521        },
 522        .probe          = tps80031_probe,
 523        .id_table       = tps80031_id_table,
 524};
 525
 526static int __init tps80031_init(void)
 527{
 528        return i2c_add_driver(&tps80031_driver);
 529}
 530subsys_initcall(tps80031_init);
 531