// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  linux/drivers/mmc/core/mmc_ops.h
 *
 *  Copyright 2006-2007 Pierre Ossman
 */

#include <linux/slab.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/scatterlist.h>

#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>

#include "core.h"
#include "card.h"
#include "host.h"
#include "mmc_ops.h"

#define MMC_BKOPS_TIMEOUT_MS            (120 * 1000) /* 120s */
#define MMC_CACHE_FLUSH_TIMEOUT_MS      (30 * 1000) /* 30s */
#define MMC_SANITIZE_TIMEOUT_MS         (240 * 1000) /* 240s */

static const u8 tuning_blk_pattern_4bit[] = {
        0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
        0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
        0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
        0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
        0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
        0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
        0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
        0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
};

static const u8 tuning_blk_pattern_8bit[] = {
        0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
        0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
        0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
        0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
        0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
        0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
        0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
        0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
        0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
        0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
        0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
        0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
        0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
        0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
        0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
        0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
};

int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries)
{
        int err;
        struct mmc_command cmd = {};

        cmd.opcode = MMC_SEND_STATUS;
        if (!mmc_host_is_spi(card->host))
                cmd.arg = card->rca << 16;
        cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;

        err = mmc_wait_for_cmd(card->host, &cmd, retries);
        if (err)
                return err;

        /* NOTE: callers are required to understand the difference
         * between "native" and SPI format status words!
         */
        if (status)
                *status = cmd.resp[0];

        return 0;
}
EXPORT_SYMBOL_GPL(__mmc_send_status);

int mmc_send_status(struct mmc_card *card, u32 *status)
{
        return __mmc_send_status(card, status, MMC_CMD_RETRIES);
}
EXPORT_SYMBOL_GPL(mmc_send_status);

static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
{
        struct mmc_command cmd = {};

        cmd.opcode = MMC_SELECT_CARD;

        if (card) {
                cmd.arg = card->rca << 16;
                cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
        } else {
                cmd.arg = 0;
                cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
        }

        return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
}

int mmc_select_card(struct mmc_card *card)
{

        return _mmc_select_card(card->host, card);
}

int mmc_deselect_cards(struct mmc_host *host)
{
        return _mmc_select_card(host, NULL);
}

/*
 * Write the value specified in the device tree or board code into the optional
 * 16 bit Driver Stage Register. This can be used to tune raise/fall times and
 * drive strength of the DAT and CMD outputs. The actual meaning of a given
 * value is hardware dependant.
 * The presence of the DSR register can be determined from the CSD register,
 * bit 76.
 */
int mmc_set_dsr(struct mmc_host *host)
{
        struct mmc_command cmd = {};

        cmd.opcode = MMC_SET_DSR;

        cmd.arg = (host->dsr << 16) | 0xffff;
        cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;

        return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
}

int mmc_go_idle(struct mmc_host *host)
{
        int err;
        struct mmc_command cmd = {};

        /*
         * Non-SPI hosts need to prevent chipselect going active during
         * GO_IDLE; that would put chips into SPI mode.  Remind them of
         * that in case of hardware that won't pull up DAT3/nCS otherwise.
         *
         * SPI hosts ignore ios.chip_select; it's managed according to
         * rules that must accommodate non-MMC slaves which this layer
         * won't even know about.
         */
        if (!mmc_host_is_spi(host)) {
                mmc_set_chip_select(host, MMC_CS_HIGH);
                mmc_delay(1);
        }

        cmd.opcode = MMC_GO_IDLE_STATE;
        cmd.arg = 0;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;

        err = mmc_wait_for_cmd(host, &cmd, 0);

        mmc_delay(1);

        if (!mmc_host_is_spi(host)) {
                mmc_set_chip_select(host, MMC_CS_DONTCARE);
                mmc_delay(1);
        }

        host->use_spi_crc = 0;

        return err;
}

int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
{
        struct mmc_command cmd = {};
        int i, err = 0;

        cmd.opcode = MMC_SEND_OP_COND;
        cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;

        for (i = 100; i; i--) {
                err = mmc_wait_for_cmd(host, &cmd, 0);
                if (err)
                        break;

                /* wait until reset completes */
                if (mmc_host_is_spi(host)) {
                        if (!(cmd.resp[0] & R1_SPI_IDLE))
                                break;
                } else {
                        if (cmd.resp[0] & MMC_CARD_BUSY)
                                break;
                }

                err = -ETIMEDOUT;

                mmc_delay(10);

                /*
                 * According to eMMC specification v5.1 section 6.4.3, we
                 * should issue CMD1 repeatedly in the idle state until
                 * the eMMC is ready. Otherwise some eMMC devices seem to enter
                 * the inactive mode after mmc_init_card() issued CMD0 when
                 * the eMMC device is busy.
                 */
                if (!ocr && !mmc_host_is_spi(host))
                        cmd.arg = cmd.resp[0] | BIT(30);
        }

        if (rocr && !mmc_host_is_spi(host))
                *rocr = cmd.resp[0];

        return err;
}

int mmc_set_relative_addr(struct mmc_card *card)
{
        struct mmc_command cmd = {};

        cmd.opcode = MMC_SET_RELATIVE_ADDR;
        cmd.arg = card->rca << 16;
        cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

        return mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
}

static int
mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
{
        int err;
        struct mmc_command cmd = {};

        cmd.opcode = opcode;
        cmd.arg = arg;
        cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;

        err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
        if (err)
                return err;

        memcpy(cxd, cmd.resp, sizeof(u32) * 4);

        return 0;
}

/*
 * NOTE: void *buf, caller for the buf is required to use DMA-capable
 * buffer or on-stack buffer (with some overhead in callee).
 */
static int
mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
                u32 opcode, void *buf, unsigned len)
{
        struct mmc_request mrq = {};
        struct mmc_command cmd = {};
        struct mmc_data data = {};
        struct scatterlist sg;

        mrq.cmd = &cmd;
        mrq.data = &data;

        cmd.opcode = opcode;
        cmd.arg = 0;

        /* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
         * rely on callers to never use this with "native" calls for reading
         * CSD or CID.  Native versions of those commands use the R2 type,
         * not R1 plus a data block.
         */
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

        data.blksz = len;
        data.blocks = 1;
        data.flags = MMC_DATA_READ;
        data.sg = &sg;
        data.sg_len = 1;

        sg_init_one(&sg, buf, len);

        if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
                /*
                 * The spec states that CSR and CID accesses have a timeout
                 * of 64 clock cycles.
                 */
                data.timeout_ns = 0;
                data.timeout_clks = 64;
        } else
                mmc_set_data_timeout(&data, card);

        mmc_wait_for_req(host, &mrq);

        if (cmd.error)
                return cmd.error;
        if (data.error)
                return data.error;

        return 0;
}

static int mmc_spi_send_csd(struct mmc_card *card, u32 *csd)
{
        int ret, i;
        __be32 *csd_tmp;

        csd_tmp = kzalloc(16, GFP_KERNEL);
        if (!csd_tmp)
                return -ENOMEM;

        ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16);
        if (ret)
                goto err;

        for (i = 0; i < 4; i++)
                csd[i] = be32_to_cpu(csd_tmp[i]);

err:
        kfree(csd_tmp);
        return ret;
}

int mmc_send_csd(struct mmc_card *card, u32 *csd)
{
        if (mmc_host_is_spi(card->host))
                return mmc_spi_send_csd(card, csd);

        return mmc_send_cxd_native(card->host, card->rca << 16, csd,
                                MMC_SEND_CSD);
}

static int mmc_spi_send_cid(struct mmc_host *host, u32 *cid)
{
        int ret, i;
        __be32 *cid_tmp;

        cid_tmp = kzalloc(16, GFP_KERNEL);
        if (!cid_tmp)
                return -ENOMEM;

        ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16);
        if (ret)
                goto err;

        for (i = 0; i < 4; i++)
                cid[i] = be32_to_cpu(cid_tmp[i]);

err:
        kfree(cid_tmp);
        return ret;
}

int mmc_send_cid(struct mmc_host *host, u32 *cid)
{
        if (mmc_host_is_spi(host))
                return mmc_spi_send_cid(host, cid);

        return mmc_send_cxd_native(host, 0, cid, MMC_ALL_SEND_CID);
}

int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
{
        int err;
        u8 *ext_csd;

        if (!card || !new_ext_csd)
                return -EINVAL;

        if (!mmc_can_ext_csd(card))
                return -EOPNOTSUPP;

        /*
         * As the ext_csd is so large and mostly unused, we don't store the
         * raw block in mmc_card.
         */
        ext_csd = kzalloc(512, GFP_KERNEL);
        if (!ext_csd)
                return -ENOMEM;

        err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
                                512);
        if (err)
                kfree(ext_csd);
        else
                *new_ext_csd = ext_csd;

        return err;
}
EXPORT_SYMBOL_GPL(mmc_get_ext_csd);

int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
        struct mmc_command cmd = {};
        int err;

        cmd.opcode = MMC_SPI_READ_OCR;
        cmd.arg = highcap ? (1 << 30) : 0;
        cmd.flags = MMC_RSP_SPI_R3;

        err = mmc_wait_for_cmd(host, &cmd, 0);

        *ocrp = cmd.resp[1];
        return err;
}

int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
{
        struct mmc_command cmd = {};
        int err;

        cmd.opcode = MMC_SPI_CRC_ON_OFF;
        cmd.flags = MMC_RSP_SPI_R1;
        cmd.arg = use_crc;

        err = mmc_wait_for_cmd(host, &cmd, 0);
        if (!err)
                host->use_spi_crc = use_crc;
        return err;
}

static int mmc_switch_status_error(struct mmc_host *host, u32 status)
{
        if (mmc_host_is_spi(host)) {
                if (status & R1_SPI_ILLEGAL_COMMAND)
                        return -EBADMSG;
        } else {
                if (R1_STATUS(status))
                        pr_warn("%s: unexpected status %#x after switch\n",
                                mmc_hostname(host), status);
                if (status & R1_SWITCH_ERROR)
                        return -EBADMSG;
        }
        return 0;
}

/* Caller must hold re-tuning */
int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
{
        u32 status;
        int err;

        err = mmc_send_status(card, &status);
        if (!crc_err_fatal && err == -EILSEQ)
                return 0;
        if (err)
                return err;

        return mmc_switch_status_error(card->host, status);
}

static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
                           enum mmc_busy_cmd busy_cmd, bool *busy)
{
        struct mmc_host *host = card->host;
        u32 status = 0;
        int err;

        if (host->ops->card_busy) {
                *busy = host->ops->card_busy(host);
                return 0;
        }

        err = mmc_send_status(card, &status);
        if (retry_crc_err && err == -EILSEQ) {
                *busy = true;
                return 0;
        }
        if (err)
                return err;

        switch (busy_cmd) {
        case MMC_BUSY_CMD6:
                err = mmc_switch_status_error(card->host, status);
                break;
        case MMC_BUSY_ERASE:
                err = R1_STATUS(status) ? -EIO : 0;
                break;
        case MMC_BUSY_HPI:
                break;
        default:
                err = -EINVAL;
        }

        if (err)
                return err;

        *busy = !mmc_ready_for_data(status);
        return 0;
}

static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
                               bool send_status, bool retry_crc_err,
                               enum mmc_busy_cmd busy_cmd)
{
        struct mmc_host *host = card->host;
        int err;
        unsigned long timeout;
        unsigned int udelay = 32, udelay_max = 32768;
        bool expired = false;
        bool busy = false;

        /*
         * In cases when not allowed to poll by using CMD13 or because we aren't
         * capable of polling by using ->card_busy(), then rely on waiting the
         * stated timeout to be sufficient.
         */
        if (!send_status && !host->ops->card_busy) {
                mmc_delay(timeout_ms);
                return 0;
        }

        timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1;
        do {
                /*
                 * Due to the possibility of being preempted while polling,
                 * check the expiration time first.
                 */
                expired = time_after(jiffies, timeout);

                err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy);
                if (err)
                        return err;

                /* Timeout if the device still remains busy. */
                if (expired && busy) {
                        pr_err("%s: Card stuck being busy! %s\n",
                                mmc_hostname(host), __func__);
                        return -ETIMEDOUT;
                }

                /* Throttle the polling rate to avoid hogging the CPU. */
                if (busy) {
                        usleep_range(udelay, udelay * 2);
                        if (udelay < udelay_max)
                                udelay *= 2;
                }
        } while (busy);

        return 0;
}

int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
                      enum mmc_busy_cmd busy_cmd)
{
        return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd);
}

/**
 *      __mmc_switch - modify EXT_CSD register
 *      @card: the MMC card associated with the data transfer
 *      @set: cmd set values
 *      @index: EXT_CSD register index
 *      @value: value to program into EXT_CSD register
 *      @timeout_ms: timeout (ms) for operation performed by register write,
 *                   timeout of zero implies maximum possible timeout
 *      @timing: new timing to change to
 *      @send_status: send status cmd to poll for busy
 *      @retry_crc_err: retry when CRC errors when polling with CMD13 for busy
 *
 *      Modifies the EXT_CSD register for selected card.
 */
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
                unsigned int timeout_ms, unsigned char timing,
                bool send_status, bool retry_crc_err)
{
        struct mmc_host *host = card->host;
        int err;
        struct mmc_command cmd = {};
        bool use_r1b_resp = true;
        unsigned char old_timing = host->ios.timing;

        mmc_retune_hold(host);

        if (!timeout_ms) {
                pr_warn("%s: unspecified timeout for CMD6 - use generic\n",
                        mmc_hostname(host));
                timeout_ms = card->ext_csd.generic_cmd6_time;
        }

        /*
         * If the max_busy_timeout of the host is specified, make sure it's
         * enough to fit the used timeout_ms. In case it's not, let's instruct
         * the host to avoid HW busy detection, by converting to a R1 response
         * instead of a R1B. Note, some hosts requires R1B, which also means
         * they are on their own when it comes to deal with the busy timeout.
         */
        if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
            (timeout_ms > host->max_busy_timeout))
                use_r1b_resp = false;

        cmd.opcode = MMC_SWITCH;
        cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
                  (index << 16) |
                  (value << 8) |
                  set;
        cmd.flags = MMC_CMD_AC;
        if (use_r1b_resp) {
                cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
                cmd.busy_timeout = timeout_ms;
        } else {
                cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
        }

        err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
        if (err)
                goto out;

        /*If SPI or used HW busy detection above, then we don't need to poll. */
        if (((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) ||
                mmc_host_is_spi(host))
                goto out_tim;

        /* Let's try to poll to find out when the command is completed. */
        err = __mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err,
                                  MMC_BUSY_CMD6);
        if (err)
                goto out;

out_tim:
        /* Switch to new timing before check switch status. */
        if (timing)
                mmc_set_timing(host, timing);

        if (send_status) {
                err = mmc_switch_status(card, true);
                if (err && timing)
                        mmc_set_timing(host, old_timing);
        }
out:
        mmc_retune_release(host);

        return err;
}

int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
                unsigned int timeout_ms)
{
        return __mmc_switch(card, set, index, value, timeout_ms, 0,
                            true, false);
}
EXPORT_SYMBOL_GPL(mmc_switch);

int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error)
{
        struct mmc_request mrq = {};
        struct mmc_command cmd = {};
        struct mmc_data data = {};
        struct scatterlist sg;
        struct mmc_ios *ios = &host->ios;
        const u8 *tuning_block_pattern;
        int size, err = 0;
        u8 *data_buf;

        if (ios->bus_width == MMC_BUS_WIDTH_8) {
                tuning_block_pattern = tuning_blk_pattern_8bit;
                size = sizeof(tuning_blk_pattern_8bit);
        } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
                tuning_block_pattern = tuning_blk_pattern_4bit;
                size = sizeof(tuning_blk_pattern_4bit);
        } else
                return -EINVAL;

        data_buf = kzalloc(size, GFP_KERNEL);
        if (!data_buf)
                return -ENOMEM;

        mrq.cmd = &cmd;
        mrq.data = &data;

        cmd.opcode = opcode;
        cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;

        data.blksz = size;
        data.blocks = 1;
        data.flags = MMC_DATA_READ;

        /*
         * According to the tuning specs, Tuning process
         * is normally shorter 40 executions of CMD19,
         * and timeout value should be shorter than 150 ms
         */
        data.timeout_ns = 150 * NSEC_PER_MSEC;

        data.sg = &sg;
        data.sg_len = 1;
        sg_init_one(&sg, data_buf, size);

        mmc_wait_for_req(host, &mrq);

        if (cmd_error)
                *cmd_error = cmd.error;

        if (cmd.error) {
                err = cmd.error;
                goto out;
        }

        if (data.error) {
                err = data.error;
                goto out;
        }

        if (memcmp(data_buf, tuning_block_pattern, size))
                err = -EIO;

out:
        kfree(data_buf);
        return err;
}
EXPORT_SYMBOL_GPL(mmc_send_tuning);

int mmc_abort_tuning(struct mmc_host *host, u32 opcode)
{
        struct mmc_command cmd = {};

        /*
         * eMMC specification specifies that CMD12 can be used to stop a tuning
         * command, but SD specification does not, so do nothing unless it is
         * eMMC.
         */
        if (opcode != MMC_SEND_TUNING_BLOCK_HS200)
                return 0;

        cmd.opcode = MMC_STOP_TRANSMISSION;
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;

        /*
         * For drivers that override R1 to R1b, set an arbitrary timeout based
         * on the tuning timeout i.e. 150ms.
         */
        cmd.busy_timeout = 150;

        return mmc_wait_for_cmd(host, &cmd, 0);
}
EXPORT_SYMBOL_GPL(mmc_abort_tuning);

static int
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
                  u8 len)
{
        struct mmc_request mrq = {};
        struct mmc_command cmd = {};
        struct mmc_data data = {};
        struct scatterlist sg;
        u8 *data_buf;
        u8 *test_buf;
        int i, err;
        static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
        static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };

        /* dma onto stack is unsafe/nonportable, but callers to this
         * routine normally provide temporary on-stack buffers ...
         */
        data_buf = kmalloc(len, GFP_KERNEL);
        if (!data_buf)
                return -ENOMEM;

        if (len == 8)
                test_buf = testdata_8bit;
        else if (len == 4)
                test_buf = testdata_4bit;
        else {
                pr_err("%s: Invalid bus_width %d\n",
                       mmc_hostname(host), len);
                kfree(data_buf);
                return -EINVAL;
        }

        if (opcode == MMC_BUS_TEST_W)
                memcpy(data_buf, test_buf, len);

        mrq.cmd = &cmd;
        mrq.data = &data;
        cmd.opcode = opcode;
        cmd.arg = 0;

        /* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
         * rely on callers to never use this with "native" calls for reading
         * CSD or CID.  Native versions of those commands use the R2 type,
         * not R1 plus a data block.
         */
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

        data.blksz = len;
        data.blocks = 1;
        if (opcode == MMC_BUS_TEST_R)
                data.flags = MMC_DATA_READ;
        else
                data.flags = MMC_DATA_WRITE;

        data.sg = &sg;
        data.sg_len = 1;
        mmc_set_data_timeout(&data, card);
        sg_init_one(&sg, data_buf, len);
        mmc_wait_for_req(host, &mrq);
        err = 0;
        if (opcode == MMC_BUS_TEST_R) {
                for (i = 0; i < len / 4; i++)
                        if ((test_buf[i] ^ data_buf[i]) != 0xff) {
                                err = -EIO;
                                break;
                        }
        }
        kfree(data_buf);

        if (cmd.error)
                return cmd.error;
        if (data.error)
                return data.error;

        return err;
}

int mmc_bus_test(struct mmc_card *card, u8 bus_width)
{
        int width;

        if (bus_width == MMC_BUS_WIDTH_8)
                width = 8;
        else if (bus_width == MMC_BUS_WIDTH_4)
                width = 4;
        else if (bus_width == MMC_BUS_WIDTH_1)
                return 0; /* no need for test */
        else
                return -EINVAL;

        /*
         * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
         * is a problem.  This improves chances that the test will work.
         */
        mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
        return mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
}

static int mmc_send_hpi_cmd(struct mmc_card *card)
{
        unsigned int busy_timeout_ms = card->ext_csd.out_of_int_time;
        struct mmc_host *host = card->host;
        bool use_r1b_resp = true;
        struct mmc_command cmd = {};
        int err;

        cmd.opcode = card->ext_csd.hpi_cmd;
        cmd.arg = card->rca << 16 | 1;

        /*
         * Make sure the host's max_busy_timeout fit the needed timeout for HPI.
         * In case it doesn't, let's instruct the host to avoid HW busy
         * detection, by using a R1 response instead of R1B.
         */
        if (host->max_busy_timeout && busy_timeout_ms > host->max_busy_timeout)
                use_r1b_resp = false;

        if (cmd.opcode == MMC_STOP_TRANSMISSION && use_r1b_resp) {
                cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
                cmd.busy_timeout = busy_timeout_ms;
        } else {
                cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
                use_r1b_resp = false;
        }

        err = mmc_wait_for_cmd(host, &cmd, 0);
        if (err) {
                pr_warn("%s: HPI error %d. Command response %#x\n",
                        mmc_hostname(host), err, cmd.resp[0]);
                return err;
        }

        /* No need to poll when using HW busy detection. */
        if (host->caps & MMC_CAP_WAIT_WHILE_BUSY && use_r1b_resp)
                return 0;

        /* Let's poll to find out when the HPI request completes. */
        return mmc_poll_for_busy(card, busy_timeout_ms, MMC_BUSY_HPI);
}

/**
 *      mmc_interrupt_hpi - Issue for High priority Interrupt
 *      @card: the MMC card associated with the HPI transfer
 *
 *      Issued High Priority Interrupt, and check for card status
 *      until out-of prg-state.
 */
static int mmc_interrupt_hpi(struct mmc_card *card)
{
        int err;
        u32 status;

        if (!card->ext_csd.hpi_en) {
                pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
                return 1;
        }

        err = mmc_send_status(card, &status);
        if (err) {
                pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
                goto out;
        }

        switch (R1_CURRENT_STATE(status)) {
        case R1_STATE_IDLE:
        case R1_STATE_READY:
        case R1_STATE_STBY:
        case R1_STATE_TRAN:
                /*
                 * In idle and transfer states, HPI is not needed and the caller
                 * can issue the next intended command immediately
                 */
                goto out;
        case R1_STATE_PRG:
                break;
        default:
                /* In all other states, it's illegal to issue HPI */
                pr_debug("%s: HPI cannot be sent. Card state=%d\n",
                        mmc_hostname(card->host), R1_CURRENT_STATE(status));
                err = -EINVAL;
                goto out;
        }

        err = mmc_send_hpi_cmd(card);
out:
        return err;
}

int mmc_can_ext_csd(struct mmc_card *card)
{
        return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
}

static int mmc_read_bkops_status(struct mmc_card *card)
{
        int err;
        u8 *ext_csd;

        err = mmc_get_ext_csd(card, &ext_csd);
        if (err)
                return err;

        card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
        card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
        kfree(ext_csd);
        return 0;
}

/**
 *      mmc_run_bkops - Run BKOPS for supported cards
 *      @card: MMC card to run BKOPS for
 *
 *      Run background operations synchronously for cards having manual BKOPS
 *      enabled and in case it reports urgent BKOPS level.
*/
void mmc_run_bkops(struct mmc_card *card)
{
        int err;

        if (!card->ext_csd.man_bkops_en)
                return;

        err = mmc_read_bkops_status(card);
        if (err) {
                pr_err("%s: Failed to read bkops status: %d\n",
                       mmc_hostname(card->host), err);
                return;
        }

        if (!card->ext_csd.raw_bkops_status ||
            card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2)
                return;

        mmc_retune_hold(card->host);

        /*
         * For urgent BKOPS status, LEVEL_2 and higher, let's execute
         * synchronously. Future wise, we may consider to start BKOPS, for less
         * urgent levels by using an asynchronous background task, when idle.
         */
        err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
                         EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS);
        if (err)
                pr_warn("%s: Error %d starting bkops\n",
                        mmc_hostname(card->host), err);

        mmc_retune_release(card->host);
}
EXPORT_SYMBOL(mmc_run_bkops);

/*
 * Flush the cache to the non-volatile storage.
 */
int mmc_flush_cache(struct mmc_card *card)
{
        int err = 0;

        if (mmc_card_mmc(card) &&
                        (card->ext_csd.cache_size > 0) &&
                        (card->ext_csd.cache_ctrl & 1)) {
                err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
                                 EXT_CSD_FLUSH_CACHE, 1,
                                 MMC_CACHE_FLUSH_TIMEOUT_MS);
                if (err)
                        pr_err("%s: cache flush error %d\n",
                                        mmc_hostname(card->host), err);
        }

        return err;
}
EXPORT_SYMBOL(mmc_flush_cache);

static int mmc_cmdq_switch(struct mmc_card *card, bool enable)
{
        u8 val = enable ? EXT_CSD_CMDQ_MODE_ENABLED : 0;
        int err;

        if (!card->ext_csd.cmdq_support)
                return -EOPNOTSUPP;

        err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CMDQ_MODE_EN,
                         val, card->ext_csd.generic_cmd6_time);
        if (!err)
                card->ext_csd.cmdq_en = enable;

        return err;
}

int mmc_cmdq_enable(struct mmc_card *card)
{
        return mmc_cmdq_switch(card, true);
}
EXPORT_SYMBOL_GPL(mmc_cmdq_enable);

int mmc_cmdq_disable(struct mmc_card *card)
{
        return mmc_cmdq_switch(card, false);
}
EXPORT_SYMBOL_GPL(mmc_cmdq_disable);

int mmc_sanitize(struct mmc_card *card)
{
        struct mmc_host *host = card->host;
        int err;

        if (!mmc_can_sanitize(card)) {
                pr_warn("%s: Sanitize not supported\n", mmc_hostname(host));
                return -EOPNOTSUPP;
        }

        pr_debug("%s: Sanitize in progress...\n", mmc_hostname(host));

        mmc_retune_hold(host);

        err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_SANITIZE_START,
                         1, MMC_SANITIZE_TIMEOUT_MS);
        if (err)
                pr_err("%s: Sanitize failed err=%d\n", mmc_hostname(host), err);

        /*
         * If the sanitize operation timed out, the card is probably still busy
         * in the R1_STATE_PRG. Rather than continue to wait, let's try to abort
         * it with a HPI command to get back into R1_STATE_TRAN.
         */
        if (err == -ETIMEDOUT && !mmc_interrupt_hpi(card))
                pr_warn("%s: Sanitize aborted\n", mmc_hostname(host));

        mmc_retune_release(host);

        pr_debug("%s: Sanitize completed\n", mmc_hostname(host));
        return err;
}
EXPORT_SYMBOL_GPL(mmc_sanitize);