linux/drivers/mmc/host/omap_hsmmc.c
<<
>>
Prefs
   1/*
   2 * drivers/mmc/host/omap_hsmmc.c
   3 *
   4 * Driver for OMAP2430/3430 MMC controller.
   5 *
   6 * Copyright (C) 2007 Texas Instruments.
   7 *
   8 * Authors:
   9 *      Syed Mohammed Khasim    <x0khasim@ti.com>
  10 *      Madhusudhan             <madhu.cr@ti.com>
  11 *      Mohit Jalori            <mjalori@ti.com>
  12 *
  13 * This file is licensed under the terms of the GNU General Public License
  14 * version 2. This program is licensed "as is" without any warranty of any
  15 * kind, whether express or implied.
  16 */
  17
  18#include <linux/module.h>
  19#include <linux/init.h>
  20#include <linux/kernel.h>
  21#include <linux/debugfs.h>
  22#include <linux/dmaengine.h>
  23#include <linux/seq_file.h>
  24#include <linux/sizes.h>
  25#include <linux/interrupt.h>
  26#include <linux/delay.h>
  27#include <linux/dma-mapping.h>
  28#include <linux/platform_device.h>
  29#include <linux/timer.h>
  30#include <linux/clk.h>
  31#include <linux/of.h>
  32#include <linux/of_irq.h>
  33#include <linux/of_device.h>
  34#include <linux/mmc/host.h>
  35#include <linux/mmc/core.h>
  36#include <linux/mmc/mmc.h>
  37#include <linux/mmc/slot-gpio.h>
  38#include <linux/io.h>
  39#include <linux/irq.h>
  40#include <linux/regulator/consumer.h>
  41#include <linux/pinctrl/consumer.h>
  42#include <linux/pm_runtime.h>
  43#include <linux/pm_wakeirq.h>
  44#include <linux/platform_data/hsmmc-omap.h>
  45
  46/* OMAP HSMMC Host Controller Registers */
  47#define OMAP_HSMMC_SYSSTATUS    0x0014
  48#define OMAP_HSMMC_CON          0x002C
  49#define OMAP_HSMMC_SDMASA       0x0100
  50#define OMAP_HSMMC_BLK          0x0104
  51#define OMAP_HSMMC_ARG          0x0108
  52#define OMAP_HSMMC_CMD          0x010C
  53#define OMAP_HSMMC_RSP10        0x0110
  54#define OMAP_HSMMC_RSP32        0x0114
  55#define OMAP_HSMMC_RSP54        0x0118
  56#define OMAP_HSMMC_RSP76        0x011C
  57#define OMAP_HSMMC_DATA         0x0120
  58#define OMAP_HSMMC_PSTATE       0x0124
  59#define OMAP_HSMMC_HCTL         0x0128
  60#define OMAP_HSMMC_SYSCTL       0x012C
  61#define OMAP_HSMMC_STAT         0x0130
  62#define OMAP_HSMMC_IE           0x0134
  63#define OMAP_HSMMC_ISE          0x0138
  64#define OMAP_HSMMC_AC12         0x013C
  65#define OMAP_HSMMC_CAPA         0x0140
  66
  67#define VS18                    (1 << 26)
  68#define VS30                    (1 << 25)
  69#define HSS                     (1 << 21)
  70#define SDVS18                  (0x5 << 9)
  71#define SDVS30                  (0x6 << 9)
  72#define SDVS33                  (0x7 << 9)
  73#define SDVS_MASK               0x00000E00
  74#define SDVSCLR                 0xFFFFF1FF
  75#define SDVSDET                 0x00000400
  76#define AUTOIDLE                0x1
  77#define SDBP                    (1 << 8)
  78#define DTO                     0xe
  79#define ICE                     0x1
  80#define ICS                     0x2
  81#define CEN                     (1 << 2)
  82#define CLKD_MAX                0x3FF           /* max clock divisor: 1023 */
  83#define CLKD_MASK               0x0000FFC0
  84#define CLKD_SHIFT              6
  85#define DTO_MASK                0x000F0000
  86#define DTO_SHIFT               16
  87#define INIT_STREAM             (1 << 1)
  88#define ACEN_ACMD23             (2 << 2)
  89#define DP_SELECT               (1 << 21)
  90#define DDIR                    (1 << 4)
  91#define DMAE                    0x1
  92#define MSBS                    (1 << 5)
  93#define BCE                     (1 << 1)
  94#define FOUR_BIT                (1 << 1)
  95#define HSPE                    (1 << 2)
  96#define IWE                     (1 << 24)
  97#define DDR                     (1 << 19)
  98#define CLKEXTFREE              (1 << 16)
  99#define CTPL                    (1 << 11)
 100#define DW8                     (1 << 5)
 101#define OD                      0x1
 102#define STAT_CLEAR              0xFFFFFFFF
 103#define INIT_STREAM_CMD         0x00000000
 104#define DUAL_VOLT_OCR_BIT       7
 105#define SRC                     (1 << 25)
 106#define SRD                     (1 << 26)
 107#define SOFTRESET               (1 << 1)
 108
 109/* PSTATE */
 110#define DLEV_DAT(x)             (1 << (20 + (x)))
 111
 112/* Interrupt masks for IE and ISE register */
 113#define CC_EN                   (1 << 0)
 114#define TC_EN                   (1 << 1)
 115#define BWR_EN                  (1 << 4)
 116#define BRR_EN                  (1 << 5)
 117#define CIRQ_EN                 (1 << 8)
 118#define ERR_EN                  (1 << 15)
 119#define CTO_EN                  (1 << 16)
 120#define CCRC_EN                 (1 << 17)
 121#define CEB_EN                  (1 << 18)
 122#define CIE_EN                  (1 << 19)
 123#define DTO_EN                  (1 << 20)
 124#define DCRC_EN                 (1 << 21)
 125#define DEB_EN                  (1 << 22)
 126#define ACE_EN                  (1 << 24)
 127#define CERR_EN                 (1 << 28)
 128#define BADA_EN                 (1 << 29)
 129
 130#define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\
 131                DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
 132                BRR_EN | BWR_EN | TC_EN | CC_EN)
 133
 134#define CNI     (1 << 7)
 135#define ACIE    (1 << 4)
 136#define ACEB    (1 << 3)
 137#define ACCE    (1 << 2)
 138#define ACTO    (1 << 1)
 139#define ACNE    (1 << 0)
 140
 141#define MMC_AUTOSUSPEND_DELAY   100
 142#define MMC_TIMEOUT_MS          20              /* 20 mSec */
 143#define MMC_TIMEOUT_US          20000           /* 20000 micro Sec */
 144#define OMAP_MMC_MIN_CLOCK      400000
 145#define OMAP_MMC_MAX_CLOCK      52000000
 146#define DRIVER_NAME             "omap_hsmmc"
 147
 148/*
 149 * One controller can have multiple slots, like on some omap boards using
 150 * omap.c controller driver. Luckily this is not currently done on any known
 151 * omap_hsmmc.c device.
 152 */
 153#define mmc_pdata(host)         host->pdata
 154
 155/*
 156 * MMC Host controller read/write API's
 157 */
 158#define OMAP_HSMMC_READ(base, reg)      \
 159        __raw_readl((base) + OMAP_HSMMC_##reg)
 160
 161#define OMAP_HSMMC_WRITE(base, reg, val) \
 162        __raw_writel((val), (base) + OMAP_HSMMC_##reg)
 163
 164struct omap_hsmmc_next {
 165        unsigned int    dma_len;
 166        s32             cookie;
 167};
 168
 169struct omap_hsmmc_host {
 170        struct  device          *dev;
 171        struct  mmc_host        *mmc;
 172        struct  mmc_request     *mrq;
 173        struct  mmc_command     *cmd;
 174        struct  mmc_data        *data;
 175        struct  clk             *fclk;
 176        struct  clk             *dbclk;
 177        struct  regulator       *pbias;
 178        bool                    pbias_enabled;
 179        void    __iomem         *base;
 180        int                     vqmmc_enabled;
 181        resource_size_t         mapbase;
 182        spinlock_t              irq_lock; /* Prevent races with irq handler */
 183        unsigned int            dma_len;
 184        unsigned int            dma_sg_idx;
 185        unsigned char           bus_mode;
 186        unsigned char           power_mode;
 187        int                     suspended;
 188        u32                     con;
 189        u32                     hctl;
 190        u32                     sysctl;
 191        u32                     capa;
 192        int                     irq;
 193        int                     wake_irq;
 194        int                     use_dma, dma_ch;
 195        struct dma_chan         *tx_chan;
 196        struct dma_chan         *rx_chan;
 197        int                     response_busy;
 198        int                     context_loss;
 199        int                     reqs_blocked;
 200        int                     req_in_progress;
 201        unsigned long           clk_rate;
 202        unsigned int            flags;
 203#define AUTO_CMD23              (1 << 0)        /* Auto CMD23 support */
 204#define HSMMC_SDIO_IRQ_ENABLED  (1 << 1)        /* SDIO irq enabled */
 205        struct omap_hsmmc_next  next_data;
 206        struct  omap_hsmmc_platform_data        *pdata;
 207};
 208
 209struct omap_mmc_of_data {
 210        u32 reg_offset;
 211        u8 controller_flags;
 212};
 213
 214static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
 215
 216static int omap_hsmmc_enable_supply(struct mmc_host *mmc)
 217{
 218        int ret;
 219        struct omap_hsmmc_host *host = mmc_priv(mmc);
 220        struct mmc_ios *ios = &mmc->ios;
 221
 222        if (!IS_ERR(mmc->supply.vmmc)) {
 223                ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
 224                if (ret)
 225                        return ret;
 226        }
 227
 228        /* Enable interface voltage rail, if needed */
 229        if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
 230                ret = regulator_enable(mmc->supply.vqmmc);
 231                if (ret) {
 232                        dev_err(mmc_dev(mmc), "vmmc_aux reg enable failed\n");
 233                        goto err_vqmmc;
 234                }
 235                host->vqmmc_enabled = 1;
 236        }
 237
 238        return 0;
 239
 240err_vqmmc:
 241        if (!IS_ERR(mmc->supply.vmmc))
 242                mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 243
 244        return ret;
 245}
 246
 247static int omap_hsmmc_disable_supply(struct mmc_host *mmc)
 248{
 249        int ret;
 250        int status;
 251        struct omap_hsmmc_host *host = mmc_priv(mmc);
 252
 253        if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
 254                ret = regulator_disable(mmc->supply.vqmmc);
 255                if (ret) {
 256                        dev_err(mmc_dev(mmc), "vmmc_aux reg disable failed\n");
 257                        return ret;
 258                }
 259                host->vqmmc_enabled = 0;
 260        }
 261
 262        if (!IS_ERR(mmc->supply.vmmc)) {
 263                ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 264                if (ret)
 265                        goto err_set_ocr;
 266        }
 267
 268        return 0;
 269
 270err_set_ocr:
 271        if (!IS_ERR(mmc->supply.vqmmc)) {
 272                status = regulator_enable(mmc->supply.vqmmc);
 273                if (status)
 274                        dev_err(mmc_dev(mmc), "vmmc_aux re-enable failed\n");
 275        }
 276
 277        return ret;
 278}
 279
 280static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on)
 281{
 282        int ret;
 283
 284        if (IS_ERR(host->pbias))
 285                return 0;
 286
 287        if (power_on) {
 288                if (host->pbias_enabled == 0) {
 289                        ret = regulator_enable(host->pbias);
 290                        if (ret) {
 291                                dev_err(host->dev, "pbias reg enable fail\n");
 292                                return ret;
 293                        }
 294                        host->pbias_enabled = 1;
 295                }
 296        } else {
 297                if (host->pbias_enabled == 1) {
 298                        ret = regulator_disable(host->pbias);
 299                        if (ret) {
 300                                dev_err(host->dev, "pbias reg disable fail\n");
 301                                return ret;
 302                        }
 303                        host->pbias_enabled = 0;
 304                }
 305        }
 306
 307        return 0;
 308}
 309
 310static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on)
 311{
 312        struct mmc_host *mmc = host->mmc;
 313        int ret = 0;
 314
 315        /*
 316         * If we don't see a Vcc regulator, assume it's a fixed
 317         * voltage always-on regulator.
 318         */
 319        if (IS_ERR(mmc->supply.vmmc))
 320                return 0;
 321
 322        ret = omap_hsmmc_set_pbias(host, false);
 323        if (ret)
 324                return ret;
 325
 326        /*
 327         * Assume Vcc regulator is used only to power the card ... OMAP
 328         * VDDS is used to power the pins, optionally with a transceiver to
 329         * support cards using voltages other than VDDS (1.8V nominal).  When a
 330         * transceiver is used, DAT3..7 are muxed as transceiver control pins.
 331         *
 332         * In some cases this regulator won't support enable/disable;
 333         * e.g. it's a fixed rail for a WLAN chip.
 334         *
 335         * In other cases vcc_aux switches interface power.  Example, for
 336         * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
 337         * chips/cards need an interface voltage rail too.
 338         */
 339        if (power_on) {
 340                ret = omap_hsmmc_enable_supply(mmc);
 341                if (ret)
 342                        return ret;
 343
 344                ret = omap_hsmmc_set_pbias(host, true);
 345                if (ret)
 346                        goto err_set_voltage;
 347        } else {
 348                ret = omap_hsmmc_disable_supply(mmc);
 349                if (ret)
 350                        return ret;
 351        }
 352
 353        return 0;
 354
 355err_set_voltage:
 356        omap_hsmmc_disable_supply(mmc);
 357
 358        return ret;
 359}
 360
 361static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
 362{
 363        int ret;
 364
 365        if (IS_ERR(reg))
 366                return 0;
 367
 368        if (regulator_is_enabled(reg)) {
 369                ret = regulator_enable(reg);
 370                if (ret)
 371                        return ret;
 372
 373                ret = regulator_disable(reg);
 374                if (ret)
 375                        return ret;
 376        }
 377
 378        return 0;
 379}
 380
 381static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
 382{
 383        struct mmc_host *mmc = host->mmc;
 384        int ret;
 385
 386        /*
 387         * disable regulators enabled during boot and get the usecount
 388         * right so that regulators can be enabled/disabled by checking
 389         * the return value of regulator_is_enabled
 390         */
 391        ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
 392        if (ret) {
 393                dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
 394                return ret;
 395        }
 396
 397        ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
 398        if (ret) {
 399                dev_err(host->dev,
 400                        "fail to disable boot enabled vmmc_aux reg\n");
 401                return ret;
 402        }
 403
 404        ret = omap_hsmmc_disable_boot_regulator(host->pbias);
 405        if (ret) {
 406                dev_err(host->dev,
 407                        "failed to disable boot enabled pbias reg\n");
 408                return ret;
 409        }
 410
 411        return 0;
 412}
 413
 414static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 415{
 416        int ret;
 417        struct mmc_host *mmc = host->mmc;
 418
 419
 420        ret = mmc_regulator_get_supply(mmc);
 421        if (ret)
 422                return ret;
 423
 424        /* Allow an aux regulator */
 425        if (IS_ERR(mmc->supply.vqmmc)) {
 426                mmc->supply.vqmmc = devm_regulator_get_optional(host->dev,
 427                                                                "vmmc_aux");
 428                if (IS_ERR(mmc->supply.vqmmc)) {
 429                        ret = PTR_ERR(mmc->supply.vqmmc);
 430                        if ((ret != -ENODEV) && host->dev->of_node)
 431                                return ret;
 432                        dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n",
 433                                PTR_ERR(mmc->supply.vqmmc));
 434                }
 435        }
 436
 437        host->pbias = devm_regulator_get_optional(host->dev, "pbias");
 438        if (IS_ERR(host->pbias)) {
 439                ret = PTR_ERR(host->pbias);
 440                if ((ret != -ENODEV) && host->dev->of_node) {
 441                        dev_err(host->dev,
 442                        "SD card detect fail? enable CONFIG_REGULATOR_PBIAS\n");
 443                        return ret;
 444                }
 445                dev_dbg(host->dev, "unable to get pbias regulator %ld\n",
 446                        PTR_ERR(host->pbias));
 447        }
 448
 449        /* For eMMC do not power off when not in sleep state */
 450        if (mmc_pdata(host)->no_regulator_off_init)
 451                return 0;
 452
 453        ret = omap_hsmmc_disable_boot_regulators(host);
 454        if (ret)
 455                return ret;
 456
 457        return 0;
 458}
 459
 460/*
 461 * Start clock to the card
 462 */
 463static void omap_hsmmc_start_clock(struct omap_hsmmc_host *host)
 464{
 465        OMAP_HSMMC_WRITE(host->base, SYSCTL,
 466                OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
 467}
 468
 469/*
 470 * Stop clock to the card
 471 */
 472static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
 473{
 474        OMAP_HSMMC_WRITE(host->base, SYSCTL,
 475                OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
 476        if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
 477                dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n");
 478}
 479
 480static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
 481                                  struct mmc_command *cmd)
 482{
 483        u32 irq_mask = INT_EN_MASK;
 484        unsigned long flags;
 485
 486        if (host->use_dma)
 487                irq_mask &= ~(BRR_EN | BWR_EN);
 488
 489        /* Disable timeout for erases */
 490        if (cmd->opcode == MMC_ERASE)
 491                irq_mask &= ~DTO_EN;
 492
 493        spin_lock_irqsave(&host->irq_lock, flags);
 494        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 495        OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
 496
 497        /* latch pending CIRQ, but don't signal MMC core */
 498        if (host->flags & HSMMC_SDIO_IRQ_ENABLED)
 499                irq_mask |= CIRQ_EN;
 500        OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
 501        spin_unlock_irqrestore(&host->irq_lock, flags);
 502}
 503
 504static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host)
 505{
 506        u32 irq_mask = 0;
 507        unsigned long flags;
 508
 509        spin_lock_irqsave(&host->irq_lock, flags);
 510        /* no transfer running but need to keep cirq if enabled */
 511        if (host->flags & HSMMC_SDIO_IRQ_ENABLED)
 512                irq_mask |= CIRQ_EN;
 513        OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
 514        OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
 515        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 516        spin_unlock_irqrestore(&host->irq_lock, flags);
 517}
 518
 519/* Calculate divisor for the given clock frequency */
 520static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios)
 521{
 522        u16 dsor = 0;
 523
 524        if (ios->clock) {
 525                dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock);
 526                if (dsor > CLKD_MAX)
 527                        dsor = CLKD_MAX;
 528        }
 529
 530        return dsor;
 531}
 532
 533static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
 534{
 535        struct mmc_ios *ios = &host->mmc->ios;
 536        unsigned long regval;
 537        unsigned long timeout;
 538        unsigned long clkdiv;
 539
 540        dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
 541
 542        omap_hsmmc_stop_clock(host);
 543
 544        regval = OMAP_HSMMC_READ(host->base, SYSCTL);
 545        regval = regval & ~(CLKD_MASK | DTO_MASK);
 546        clkdiv = calc_divisor(host, ios);
 547        regval = regval | (clkdiv << 6) | (DTO << 16);
 548        OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
 549        OMAP_HSMMC_WRITE(host->base, SYSCTL,
 550                OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
 551
 552        /* Wait till the ICS bit is set */
 553        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
 554        while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS
 555                && time_before(jiffies, timeout))
 556                cpu_relax();
 557
 558        /*
 559         * Enable High-Speed Support
 560         * Pre-Requisites
 561         *      - Controller should support High-Speed-Enable Bit
 562         *      - Controller should not be using DDR Mode
 563         *      - Controller should advertise that it supports High Speed
 564         *        in capabilities register
 565         *      - MMC/SD clock coming out of controller > 25MHz
 566         */
 567        if ((mmc_pdata(host)->features & HSMMC_HAS_HSPE_SUPPORT) &&
 568            (ios->timing != MMC_TIMING_MMC_DDR52) &&
 569            (ios->timing != MMC_TIMING_UHS_DDR50) &&
 570            ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
 571                regval = OMAP_HSMMC_READ(host->base, HCTL);
 572                if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
 573                        regval |= HSPE;
 574                else
 575                        regval &= ~HSPE;
 576
 577                OMAP_HSMMC_WRITE(host->base, HCTL, regval);
 578        }
 579
 580        omap_hsmmc_start_clock(host);
 581}
 582
 583static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
 584{
 585        struct mmc_ios *ios = &host->mmc->ios;
 586        u32 con;
 587
 588        con = OMAP_HSMMC_READ(host->base, CON);
 589        if (ios->timing == MMC_TIMING_MMC_DDR52 ||
 590            ios->timing == MMC_TIMING_UHS_DDR50)
 591                con |= DDR;     /* configure in DDR mode */
 592        else
 593                con &= ~DDR;
 594        switch (ios->bus_width) {
 595        case MMC_BUS_WIDTH_8:
 596                OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
 597                break;
 598        case MMC_BUS_WIDTH_4:
 599                OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
 600                OMAP_HSMMC_WRITE(host->base, HCTL,
 601                        OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
 602                break;
 603        case MMC_BUS_WIDTH_1:
 604                OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
 605                OMAP_HSMMC_WRITE(host->base, HCTL,
 606                        OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
 607                break;
 608        }
 609}
 610
 611static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host)
 612{
 613        struct mmc_ios *ios = &host->mmc->ios;
 614        u32 con;
 615
 616        con = OMAP_HSMMC_READ(host->base, CON);
 617        if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
 618                OMAP_HSMMC_WRITE(host->base, CON, con | OD);
 619        else
 620                OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
 621}
 622
 623#ifdef CONFIG_PM
 624
 625/*
 626 * Restore the MMC host context, if it was lost as result of a
 627 * power state change.
 628 */
 629static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
 630{
 631        struct mmc_ios *ios = &host->mmc->ios;
 632        u32 hctl, capa;
 633        unsigned long timeout;
 634
 635        if (host->con == OMAP_HSMMC_READ(host->base, CON) &&
 636            host->hctl == OMAP_HSMMC_READ(host->base, HCTL) &&
 637            host->sysctl == OMAP_HSMMC_READ(host->base, SYSCTL) &&
 638            host->capa == OMAP_HSMMC_READ(host->base, CAPA))
 639                return 0;
 640
 641        host->context_loss++;
 642
 643        if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
 644                if (host->power_mode != MMC_POWER_OFF &&
 645                    (1 << ios->vdd) <= MMC_VDD_23_24)
 646                        hctl = SDVS18;
 647                else
 648                        hctl = SDVS30;
 649                capa = VS30 | VS18;
 650        } else {
 651                hctl = SDVS18;
 652                capa = VS18;
 653        }
 654
 655        if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
 656                hctl |= IWE;
 657
 658        OMAP_HSMMC_WRITE(host->base, HCTL,
 659                        OMAP_HSMMC_READ(host->base, HCTL) | hctl);
 660
 661        OMAP_HSMMC_WRITE(host->base, CAPA,
 662                        OMAP_HSMMC_READ(host->base, CAPA) | capa);
 663
 664        OMAP_HSMMC_WRITE(host->base, HCTL,
 665                        OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
 666
 667        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
 668        while ((OMAP_HSMMC_READ(host->base, HCTL) & SDBP) != SDBP
 669                && time_before(jiffies, timeout))
 670                ;
 671
 672        OMAP_HSMMC_WRITE(host->base, ISE, 0);
 673        OMAP_HSMMC_WRITE(host->base, IE, 0);
 674        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 675
 676        /* Do not initialize card-specific things if the power is off */
 677        if (host->power_mode == MMC_POWER_OFF)
 678                goto out;
 679
 680        omap_hsmmc_set_bus_width(host);
 681
 682        omap_hsmmc_set_clock(host);
 683
 684        omap_hsmmc_set_bus_mode(host);
 685
 686out:
 687        dev_dbg(mmc_dev(host->mmc), "context is restored: restore count %d\n",
 688                host->context_loss);
 689        return 0;
 690}
 691
 692/*
 693 * Save the MMC host context (store the number of power state changes so far).
 694 */
 695static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
 696{
 697        host->con =  OMAP_HSMMC_READ(host->base, CON);
 698        host->hctl = OMAP_HSMMC_READ(host->base, HCTL);
 699        host->sysctl =  OMAP_HSMMC_READ(host->base, SYSCTL);
 700        host->capa = OMAP_HSMMC_READ(host->base, CAPA);
 701}
 702
 703#else
 704
 705static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
 706{
 707        return 0;
 708}
 709
 710static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
 711{
 712}
 713
 714#endif
 715
 716/*
 717 * Send init stream sequence to card
 718 * before sending IDLE command
 719 */
 720static void send_init_stream(struct omap_hsmmc_host *host)
 721{
 722        int reg = 0;
 723        unsigned long timeout;
 724
 725        disable_irq(host->irq);
 726
 727        OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
 728        OMAP_HSMMC_WRITE(host->base, CON,
 729                OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
 730        OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
 731
 732        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
 733        while ((reg != CC_EN) && time_before(jiffies, timeout))
 734                reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
 735
 736        OMAP_HSMMC_WRITE(host->base, CON,
 737                OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
 738
 739        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 740        OMAP_HSMMC_READ(host->base, STAT);
 741
 742        enable_irq(host->irq);
 743}
 744
 745static ssize_t
 746omap_hsmmc_show_slot_name(struct device *dev, struct device_attribute *attr,
 747                        char *buf)
 748{
 749        struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
 750        struct omap_hsmmc_host *host = mmc_priv(mmc);
 751
 752        return sprintf(buf, "%s\n", mmc_pdata(host)->name);
 753}
 754
 755static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
 756
 757/*
 758 * Configure the response type and send the cmd.
 759 */
 760static void
 761omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
 762        struct mmc_data *data)
 763{
 764        int cmdreg = 0, resptype = 0, cmdtype = 0;
 765
 766        dev_vdbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
 767                mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
 768        host->cmd = cmd;
 769
 770        omap_hsmmc_enable_irq(host, cmd);
 771
 772        host->response_busy = 0;
 773        if (cmd->flags & MMC_RSP_PRESENT) {
 774                if (cmd->flags & MMC_RSP_136)
 775                        resptype = 1;
 776                else if (cmd->flags & MMC_RSP_BUSY) {
 777                        resptype = 3;
 778                        host->response_busy = 1;
 779                } else
 780                        resptype = 2;
 781        }
 782
 783        /*
 784         * Unlike OMAP1 controller, the cmdtype does not seem to be based on
 785         * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
 786         * a val of 0x3, rest 0x0.
 787         */
 788        if (cmd == host->mrq->stop)
 789                cmdtype = 0x3;
 790
 791        cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
 792
 793        if ((host->flags & AUTO_CMD23) && mmc_op_multi(cmd->opcode) &&
 794            host->mrq->sbc) {
 795                cmdreg |= ACEN_ACMD23;
 796                OMAP_HSMMC_WRITE(host->base, SDMASA, host->mrq->sbc->arg);
 797        }
 798        if (data) {
 799                cmdreg |= DP_SELECT | MSBS | BCE;
 800                if (data->flags & MMC_DATA_READ)
 801                        cmdreg |= DDIR;
 802                else
 803                        cmdreg &= ~(DDIR);
 804        }
 805
 806        if (host->use_dma)
 807                cmdreg |= DMAE;
 808
 809        host->req_in_progress = 1;
 810
 811        OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
 812        OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
 813}
 814
 815static struct dma_chan *omap_hsmmc_get_dma_chan(struct omap_hsmmc_host *host,
 816        struct mmc_data *data)
 817{
 818        return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
 819}
 820
 821static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq)
 822{
 823        int dma_ch;
 824        unsigned long flags;
 825
 826        spin_lock_irqsave(&host->irq_lock, flags);
 827        host->req_in_progress = 0;
 828        dma_ch = host->dma_ch;
 829        spin_unlock_irqrestore(&host->irq_lock, flags);
 830
 831        omap_hsmmc_disable_irq(host);
 832        /* Do not complete the request if DMA is still in progress */
 833        if (mrq->data && host->use_dma && dma_ch != -1)
 834                return;
 835        host->mrq = NULL;
 836        mmc_request_done(host->mmc, mrq);
 837}
 838
 839/*
 840 * Notify the transfer complete to MMC core
 841 */
 842static void
 843omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 844{
 845        if (!data) {
 846                struct mmc_request *mrq = host->mrq;
 847
 848                /* TC before CC from CMD6 - don't know why, but it happens */
 849                if (host->cmd && host->cmd->opcode == 6 &&
 850                    host->response_busy) {
 851                        host->response_busy = 0;
 852                        return;
 853                }
 854
 855                omap_hsmmc_request_done(host, mrq);
 856                return;
 857        }
 858
 859        host->data = NULL;
 860
 861        if (!data->error)
 862                data->bytes_xfered += data->blocks * (data->blksz);
 863        else
 864                data->bytes_xfered = 0;
 865
 866        if (data->stop && (data->error || !host->mrq->sbc))
 867                omap_hsmmc_start_command(host, data->stop, NULL);
 868        else
 869                omap_hsmmc_request_done(host, data->mrq);
 870}
 871
 872/*
 873 * Notify the core about command completion
 874 */
 875static void
 876omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
 877{
 878        if (host->mrq->sbc && (host->cmd == host->mrq->sbc) &&
 879            !host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) {
 880                host->cmd = NULL;
 881                omap_hsmmc_start_dma_transfer(host);
 882                omap_hsmmc_start_command(host, host->mrq->cmd,
 883                                                host->mrq->data);
 884                return;
 885        }
 886
 887        host->cmd = NULL;
 888
 889        if (cmd->flags & MMC_RSP_PRESENT) {
 890                if (cmd->flags & MMC_RSP_136) {
 891                        /* response type 2 */
 892                        cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
 893                        cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
 894                        cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
 895                        cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
 896                } else {
 897                        /* response types 1, 1b, 3, 4, 5, 6 */
 898                        cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
 899                }
 900        }
 901        if ((host->data == NULL && !host->response_busy) || cmd->error)
 902                omap_hsmmc_request_done(host, host->mrq);
 903}
 904
 905/*
 906 * DMA clean up for command errors
 907 */
 908static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
 909{
 910        int dma_ch;
 911        unsigned long flags;
 912
 913        host->data->error = errno;
 914
 915        spin_lock_irqsave(&host->irq_lock, flags);
 916        dma_ch = host->dma_ch;
 917        host->dma_ch = -1;
 918        spin_unlock_irqrestore(&host->irq_lock, flags);
 919
 920        if (host->use_dma && dma_ch != -1) {
 921                struct dma_chan *chan = omap_hsmmc_get_dma_chan(host, host->data);
 922
 923                dmaengine_terminate_all(chan);
 924                dma_unmap_sg(chan->device->dev,
 925                        host->data->sg, host->data->sg_len,
 926                        mmc_get_dma_dir(host->data));
 927
 928                host->data->host_cookie = 0;
 929        }
 930        host->data = NULL;
 931}
 932
 933/*
 934 * Readable error output
 935 */
 936#ifdef CONFIG_MMC_DEBUG
 937static void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, u32 status)
 938{
 939        /* --- means reserved bit without definition at documentation */
 940        static const char *omap_hsmmc_status_bits[] = {
 941                "CC"  , "TC"  , "BGE", "---", "BWR" , "BRR" , "---" , "---" ,
 942                "CIRQ", "OBI" , "---", "---", "---" , "---" , "---" , "ERRI",
 943                "CTO" , "CCRC", "CEB", "CIE", "DTO" , "DCRC", "DEB" , "---" ,
 944                "ACE" , "---" , "---", "---", "CERR", "BADA", "---" , "---"
 945        };
 946        char res[256];
 947        char *buf = res;
 948        int len, i;
 949
 950        len = sprintf(buf, "MMC IRQ 0x%x :", status);
 951        buf += len;
 952
 953        for (i = 0; i < ARRAY_SIZE(omap_hsmmc_status_bits); i++)
 954                if (status & (1 << i)) {
 955                        len = sprintf(buf, " %s", omap_hsmmc_status_bits[i]);
 956                        buf += len;
 957                }
 958
 959        dev_vdbg(mmc_dev(host->mmc), "%s\n", res);
 960}
 961#else
 962static inline void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host,
 963                                             u32 status)
 964{
 965}
 966#endif  /* CONFIG_MMC_DEBUG */
 967
 968/*
 969 * MMC controller internal state machines reset
 970 *
 971 * Used to reset command or data internal state machines, using respectively
 972 *  SRC or SRD bit of SYSCTL register
 973 * Can be called from interrupt context
 974 */
 975static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 976                                                   unsigned long bit)
 977{
 978        unsigned long i = 0;
 979        unsigned long limit = MMC_TIMEOUT_US;
 980
 981        OMAP_HSMMC_WRITE(host->base, SYSCTL,
 982                         OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
 983
 984        /*
 985         * OMAP4 ES2 and greater has an updated reset logic.
 986         * Monitor a 0->1 transition first
 987         */
 988        if (mmc_pdata(host)->features & HSMMC_HAS_UPDATED_RESET) {
 989                while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 990                                        && (i++ < limit))
 991                        udelay(1);
 992        }
 993        i = 0;
 994
 995        while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
 996                (i++ < limit))
 997                udelay(1);
 998
 999        if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
1000                dev_err(mmc_dev(host->mmc),
1001                        "Timeout waiting on controller reset in %s\n",
1002                        __func__);
1003}
1004
1005static void hsmmc_command_incomplete(struct omap_hsmmc_host *host,
1006                                        int err, int end_cmd)
1007{
1008        if (end_cmd) {
1009                omap_hsmmc_reset_controller_fsm(host, SRC);
1010                if (host->cmd)
1011                        host->cmd->error = err;
1012        }
1013
1014        if (host->data) {
1015                omap_hsmmc_reset_controller_fsm(host, SRD);
1016                omap_hsmmc_dma_cleanup(host, err);
1017        } else if (host->mrq && host->mrq->cmd)
1018                host->mrq->cmd->error = err;
1019}
1020
1021static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
1022{
1023        struct mmc_data *data;
1024        int end_cmd = 0, end_trans = 0;
1025        int error = 0;
1026
1027        data = host->data;
1028        dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
1029
1030        if (status & ERR_EN) {
1031                omap_hsmmc_dbg_report_irq(host, status);
1032
1033                if (status & (CTO_EN | CCRC_EN | CEB_EN))
1034                        end_cmd = 1;
1035                if (host->data || host->response_busy) {
1036                        end_trans = !end_cmd;
1037                        host->response_busy = 0;
1038                }
1039                if (status & (CTO_EN | DTO_EN))
1040                        hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
1041                else if (status & (CCRC_EN | DCRC_EN | DEB_EN | CEB_EN |
1042                                   BADA_EN))
1043                        hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
1044
1045                if (status & ACE_EN) {
1046                        u32 ac12;
1047                        ac12 = OMAP_HSMMC_READ(host->base, AC12);
1048                        if (!(ac12 & ACNE) && host->mrq->sbc) {
1049                                end_cmd = 1;
1050                                if (ac12 & ACTO)
1051                                        error =  -ETIMEDOUT;
1052                                else if (ac12 & (ACCE | ACEB | ACIE))
1053                                        error = -EILSEQ;
1054                                host->mrq->sbc->error = error;
1055                                hsmmc_command_incomplete(host, error, end_cmd);
1056                        }
1057                        dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12);
1058                }
1059        }
1060
1061        OMAP_HSMMC_WRITE(host->base, STAT, status);
1062        if (end_cmd || ((status & CC_EN) && host->cmd))
1063                omap_hsmmc_cmd_done(host, host->cmd);
1064        if ((end_trans || (status & TC_EN)) && host->mrq)
1065                omap_hsmmc_xfer_done(host, data);
1066}
1067
1068/*
1069 * MMC controller IRQ handler
1070 */
1071static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
1072{
1073        struct omap_hsmmc_host *host = dev_id;
1074        int status;
1075
1076        status = OMAP_HSMMC_READ(host->base, STAT);
1077        while (status & (INT_EN_MASK | CIRQ_EN)) {
1078                if (host->req_in_progress)
1079                        omap_hsmmc_do_irq(host, status);
1080
1081                if (status & CIRQ_EN)
1082                        mmc_signal_sdio_irq(host->mmc);
1083
1084                /* Flush posted write */
1085                status = OMAP_HSMMC_READ(host->base, STAT);
1086        }
1087
1088        return IRQ_HANDLED;
1089}
1090
1091static void set_sd_bus_power(struct omap_hsmmc_host *host)
1092{
1093        unsigned long i;
1094
1095        OMAP_HSMMC_WRITE(host->base, HCTL,
1096                         OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
1097        for (i = 0; i < loops_per_jiffy; i++) {
1098                if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP)
1099                        break;
1100                cpu_relax();
1101        }
1102}
1103
1104/*
1105 * Switch MMC interface voltage ... only relevant for MMC1.
1106 *
1107 * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
1108 * The MMC2 transceiver controls are used instead of DAT4..DAT7.
1109 * Some chips, like eMMC ones, use internal transceivers.
1110 */
1111static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
1112{
1113        u32 reg_val = 0;
1114        int ret;
1115
1116        /* Disable the clocks */
1117        if (host->dbclk)
1118                clk_disable_unprepare(host->dbclk);
1119
1120        /* Turn the power off */
1121        ret = omap_hsmmc_set_power(host, 0);
1122
1123        /* Turn the power ON with given VDD 1.8 or 3.0v */
1124        if (!ret)
1125                ret = omap_hsmmc_set_power(host, 1);
1126        if (host->dbclk)
1127                clk_prepare_enable(host->dbclk);
1128
1129        if (ret != 0)
1130                goto err;
1131
1132        OMAP_HSMMC_WRITE(host->base, HCTL,
1133                OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
1134        reg_val = OMAP_HSMMC_READ(host->base, HCTL);
1135
1136        /*
1137         * If a MMC dual voltage card is detected, the set_ios fn calls
1138         * this fn with VDD bit set for 1.8V. Upon card removal from the
1139         * slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
1140         *
1141         * Cope with a bit of slop in the range ... per data sheets:
1142         *  - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
1143         *    but recommended values are 1.71V to 1.89V
1144         *  - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
1145         *    but recommended values are 2.7V to 3.3V
1146         *
1147         * Board setup code shouldn't permit anything very out-of-range.
1148         * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
1149         * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
1150         */
1151        if ((1 << vdd) <= MMC_VDD_23_24)
1152                reg_val |= SDVS18;
1153        else
1154                reg_val |= SDVS30;
1155
1156        OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
1157        set_sd_bus_power(host);
1158
1159        return 0;
1160err:
1161        dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
1162        return ret;
1163}
1164
1165static void omap_hsmmc_dma_callback(void *param)
1166{
1167        struct omap_hsmmc_host *host = param;
1168        struct dma_chan *chan;
1169        struct mmc_data *data;
1170        int req_in_progress;
1171
1172        spin_lock_irq(&host->irq_lock);
1173        if (host->dma_ch < 0) {
1174                spin_unlock_irq(&host->irq_lock);
1175                return;
1176        }
1177
1178        data = host->mrq->data;
1179        chan = omap_hsmmc_get_dma_chan(host, data);
1180        if (!data->host_cookie)
1181                dma_unmap_sg(chan->device->dev,
1182                             data->sg, data->sg_len,
1183                             mmc_get_dma_dir(data));
1184
1185        req_in_progress = host->req_in_progress;
1186        host->dma_ch = -1;
1187        spin_unlock_irq(&host->irq_lock);
1188
1189        /* If DMA has finished after TC, complete the request */
1190        if (!req_in_progress) {
1191                struct mmc_request *mrq = host->mrq;
1192
1193                host->mrq = NULL;
1194                mmc_request_done(host->mmc, mrq);
1195        }
1196}
1197
1198static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
1199                                       struct mmc_data *data,
1200                                       struct omap_hsmmc_next *next,
1201                                       struct dma_chan *chan)
1202{
1203        int dma_len;
1204
1205        if (!next && data->host_cookie &&
1206            data->host_cookie != host->next_data.cookie) {
1207                dev_warn(host->dev, "[%s] invalid cookie: data->host_cookie %d"
1208                       " host->next_data.cookie %d\n",
1209                       __func__, data->host_cookie, host->next_data.cookie);
1210                data->host_cookie = 0;
1211        }
1212
1213        /* Check if next job is already prepared */
1214        if (next || data->host_cookie != host->next_data.cookie) {
1215                dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
1216                                     mmc_get_dma_dir(data));
1217
1218        } else {
1219                dma_len = host->next_data.dma_len;
1220                host->next_data.dma_len = 0;
1221        }
1222
1223
1224        if (dma_len == 0)
1225                return -EINVAL;
1226
1227        if (next) {
1228                next->dma_len = dma_len;
1229                data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
1230        } else
1231                host->dma_len = dma_len;
1232
1233        return 0;
1234}
1235
1236/*
1237 * Routine to configure and start DMA for the MMC card
1238 */
1239static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
1240                                        struct mmc_request *req)
1241{
1242        struct dma_async_tx_descriptor *tx;
1243        int ret = 0, i;
1244        struct mmc_data *data = req->data;
1245        struct dma_chan *chan;
1246        struct dma_slave_config cfg = {
1247                .src_addr = host->mapbase + OMAP_HSMMC_DATA,
1248                .dst_addr = host->mapbase + OMAP_HSMMC_DATA,
1249                .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1250                .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1251                .src_maxburst = data->blksz / 4,
1252                .dst_maxburst = data->blksz / 4,
1253        };
1254
1255        /* Sanity check: all the SG entries must be aligned by block size. */
1256        for (i = 0; i < data->sg_len; i++) {
1257                struct scatterlist *sgl;
1258
1259                sgl = data->sg + i;
1260                if (sgl->length % data->blksz)
1261                        return -EINVAL;
1262        }
1263        if ((data->blksz % 4) != 0)
1264                /* REVISIT: The MMC buffer increments only when MSB is written.
1265                 * Return error for blksz which is non multiple of four.
1266                 */
1267                return -EINVAL;
1268
1269        BUG_ON(host->dma_ch != -1);
1270
1271        chan = omap_hsmmc_get_dma_chan(host, data);
1272
1273        ret = dmaengine_slave_config(chan, &cfg);
1274        if (ret)
1275                return ret;
1276
1277        ret = omap_hsmmc_pre_dma_transfer(host, data, NULL, chan);
1278        if (ret)
1279                return ret;
1280
1281        tx = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
1282                data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
1283                DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1284        if (!tx) {
1285                dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n");
1286                /* FIXME: cleanup */
1287                return -1;
1288        }
1289
1290        tx->callback = omap_hsmmc_dma_callback;
1291        tx->callback_param = host;
1292
1293        /* Does not fail */
1294        dmaengine_submit(tx);
1295
1296        host->dma_ch = 1;
1297
1298        return 0;
1299}
1300
1301static void set_data_timeout(struct omap_hsmmc_host *host,
1302                             unsigned long long timeout_ns,
1303                             unsigned int timeout_clks)
1304{
1305        unsigned long long timeout = timeout_ns;
1306        unsigned int cycle_ns;
1307        uint32_t reg, clkd, dto = 0;
1308
1309        reg = OMAP_HSMMC_READ(host->base, SYSCTL);
1310        clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
1311        if (clkd == 0)
1312                clkd = 1;
1313
1314        cycle_ns = 1000000000 / (host->clk_rate / clkd);
1315        do_div(timeout, cycle_ns);
1316        timeout += timeout_clks;
1317        if (timeout) {
1318                while ((timeout & 0x80000000) == 0) {
1319                        dto += 1;
1320                        timeout <<= 1;
1321                }
1322                dto = 31 - dto;
1323                timeout <<= 1;
1324                if (timeout && dto)
1325                        dto += 1;
1326                if (dto >= 13)
1327                        dto -= 13;
1328                else
1329                        dto = 0;
1330                if (dto > 14)
1331                        dto = 14;
1332        }
1333
1334        reg &= ~DTO_MASK;
1335        reg |= dto << DTO_SHIFT;
1336        OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
1337}
1338
1339static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host)
1340{
1341        struct mmc_request *req = host->mrq;
1342        struct dma_chan *chan;
1343
1344        if (!req->data)
1345                return;
1346        OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
1347                                | (req->data->blocks << 16));
1348        set_data_timeout(host, req->data->timeout_ns,
1349                                req->data->timeout_clks);
1350        chan = omap_hsmmc_get_dma_chan(host, req->data);
1351        dma_async_issue_pending(chan);
1352}
1353
1354/*
1355 * Configure block length for MMC/SD cards and initiate the transfer.
1356 */
1357static int
1358omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
1359{
1360        int ret;
1361        unsigned long long timeout;
1362
1363        host->data = req->data;
1364
1365        if (req->data == NULL) {
1366                OMAP_HSMMC_WRITE(host->base, BLK, 0);
1367                if (req->cmd->flags & MMC_RSP_BUSY) {
1368                        timeout = req->cmd->busy_timeout * NSEC_PER_MSEC;
1369
1370                        /*
1371                         * Set an arbitrary 100ms data timeout for commands with
1372                         * busy signal and no indication of busy_timeout.
1373                         */
1374                        if (!timeout)
1375                                timeout = 100000000U;
1376
1377                        set_data_timeout(host, timeout, 0);
1378                }
1379                return 0;
1380        }
1381
1382        if (host->use_dma) {
1383                ret = omap_hsmmc_setup_dma_transfer(host, req);
1384                if (ret != 0) {
1385                        dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
1386                        return ret;
1387                }
1388        }
1389        return 0;
1390}
1391
1392static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
1393                                int err)
1394{
1395        struct omap_hsmmc_host *host = mmc_priv(mmc);
1396        struct mmc_data *data = mrq->data;
1397
1398        if (host->use_dma && data->host_cookie) {
1399                struct dma_chan *c = omap_hsmmc_get_dma_chan(host, data);
1400
1401                dma_unmap_sg(c->device->dev, data->sg, data->sg_len,
1402                             mmc_get_dma_dir(data));
1403                data->host_cookie = 0;
1404        }
1405}
1406
1407static void omap_hsmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
1408{
1409        struct omap_hsmmc_host *host = mmc_priv(mmc);
1410
1411        if (mrq->data->host_cookie) {
1412                mrq->data->host_cookie = 0;
1413                return ;
1414        }
1415
1416        if (host->use_dma) {
1417                struct dma_chan *c = omap_hsmmc_get_dma_chan(host, mrq->data);
1418
1419                if (omap_hsmmc_pre_dma_transfer(host, mrq->data,
1420                                                &host->next_data, c))
1421                        mrq->data->host_cookie = 0;
1422        }
1423}
1424
1425/*
1426 * Request function. for read/write operation
1427 */
1428static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
1429{
1430        struct omap_hsmmc_host *host = mmc_priv(mmc);
1431        int err;
1432
1433        BUG_ON(host->req_in_progress);
1434        BUG_ON(host->dma_ch != -1);
1435        if (host->reqs_blocked)
1436                host->reqs_blocked = 0;
1437        WARN_ON(host->mrq != NULL);
1438        host->mrq = req;
1439        host->clk_rate = clk_get_rate(host->fclk);
1440        err = omap_hsmmc_prepare_data(host, req);
1441        if (err) {
1442                req->cmd->error = err;
1443                if (req->data)
1444                        req->data->error = err;
1445                host->mrq = NULL;
1446                mmc_request_done(mmc, req);
1447                return;
1448        }
1449        if (req->sbc && !(host->flags & AUTO_CMD23)) {
1450                omap_hsmmc_start_command(host, req->sbc, NULL);
1451                return;
1452        }
1453
1454        omap_hsmmc_start_dma_transfer(host);
1455        omap_hsmmc_start_command(host, req->cmd, req->data);
1456}
1457
1458/* Routine to configure clock values. Exposed API to core */
1459static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1460{
1461        struct omap_hsmmc_host *host = mmc_priv(mmc);
1462        int do_send_init_stream = 0;
1463
1464        if (ios->power_mode != host->power_mode) {
1465                switch (ios->power_mode) {
1466                case MMC_POWER_OFF:
1467                        omap_hsmmc_set_power(host, 0);
1468                        break;
1469                case MMC_POWER_UP:
1470                        omap_hsmmc_set_power(host, 1);
1471                        break;
1472                case MMC_POWER_ON:
1473                        do_send_init_stream = 1;
1474                        break;
1475                }
1476                host->power_mode = ios->power_mode;
1477        }
1478
1479        /* FIXME: set registers based only on changes to ios */
1480
1481        omap_hsmmc_set_bus_width(host);
1482
1483        if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
1484                /* Only MMC1 can interface at 3V without some flavor
1485                 * of external transceiver; but they all handle 1.8V.
1486                 */
1487                if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
1488                        (ios->vdd == DUAL_VOLT_OCR_BIT)) {
1489                                /*
1490                                 * The mmc_select_voltage fn of the core does
1491                                 * not seem to set the power_mode to
1492                                 * MMC_POWER_UP upon recalculating the voltage.
1493                                 * vdd 1.8v.
1494                                 */
1495                        if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0)
1496                                dev_dbg(mmc_dev(host->mmc),
1497                                                "Switch operation failed\n");
1498                }
1499        }
1500
1501        omap_hsmmc_set_clock(host);
1502
1503        if (do_send_init_stream)
1504                send_init_stream(host);
1505
1506        omap_hsmmc_set_bus_mode(host);
1507}
1508
1509static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
1510{
1511        struct omap_hsmmc_host *host = mmc_priv(mmc);
1512
1513        if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
1514                struct device_node *np = mmc_dev(mmc)->of_node;
1515
1516                /*
1517                 * REVISIT: should be moved to sdio core and made more
1518                 * general e.g. by expanding the DT bindings of child nodes
1519                 * to provide a mechanism to provide this information:
1520                 * Documentation/devicetree/bindings/mmc/mmc-card.txt
1521                 */
1522
1523                np = of_get_compatible_child(np, "ti,wl1251");
1524                if (np) {
1525                        /*
1526                         * We have TI wl1251 attached to MMC3. Pass this
1527                         * information to the SDIO core because it can't be
1528                         * probed by normal methods.
1529                         */
1530
1531                        dev_info(host->dev, "found wl1251\n");
1532                        card->quirks |= MMC_QUIRK_NONSTD_SDIO;
1533                        card->cccr.wide_bus = 1;
1534                        card->cis.vendor = 0x104c;
1535                        card->cis.device = 0x9066;
1536                        card->cis.blksize = 512;
1537                        card->cis.max_dtr = 24000000;
1538                        card->ocr = 0x80;
1539                        of_node_put(np);
1540                }
1541        }
1542}
1543
1544static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
1545{
1546        struct omap_hsmmc_host *host = mmc_priv(mmc);
1547        u32 irq_mask, con;
1548        unsigned long flags;
1549
1550        spin_lock_irqsave(&host->irq_lock, flags);
1551
1552        con = OMAP_HSMMC_READ(host->base, CON);
1553        irq_mask = OMAP_HSMMC_READ(host->base, ISE);
1554        if (enable) {
1555                host->flags |= HSMMC_SDIO_IRQ_ENABLED;
1556                irq_mask |= CIRQ_EN;
1557                con |= CTPL | CLKEXTFREE;
1558        } else {
1559                host->flags &= ~HSMMC_SDIO_IRQ_ENABLED;
1560                irq_mask &= ~CIRQ_EN;
1561                con &= ~(CTPL | CLKEXTFREE);
1562        }
1563        OMAP_HSMMC_WRITE(host->base, CON, con);
1564        OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
1565
1566        /*
1567         * if enable, piggy back detection on current request
1568         * but always disable immediately
1569         */
1570        if (!host->req_in_progress || !enable)
1571                OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
1572
1573        /* flush posted write */
1574        OMAP_HSMMC_READ(host->base, IE);
1575
1576        spin_unlock_irqrestore(&host->irq_lock, flags);
1577}
1578
1579static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
1580{
1581        int ret;
1582
1583        /*
1584         * For omaps with wake-up path, wakeirq will be irq from pinctrl and
1585         * for other omaps, wakeirq will be from GPIO (dat line remuxed to
1586         * gpio). wakeirq is needed to detect sdio irq in runtime suspend state
1587         * with functional clock disabled.
1588         */
1589        if (!host->dev->of_node || !host->wake_irq)
1590                return -ENODEV;
1591
1592        ret = dev_pm_set_dedicated_wake_irq(host->dev, host->wake_irq);
1593        if (ret) {
1594                dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n");
1595                goto err;
1596        }
1597
1598        /*
1599         * Some omaps don't have wake-up path from deeper idle states
1600         * and need to remux SDIO DAT1 to GPIO for wake-up from idle.
1601         */
1602        if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) {
1603                struct pinctrl *p = devm_pinctrl_get(host->dev);
1604                if (IS_ERR(p)) {
1605                        ret = PTR_ERR(p);
1606                        goto err_free_irq;
1607                }
1608
1609                if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) {
1610                        dev_info(host->dev, "missing idle pinctrl state\n");
1611                        devm_pinctrl_put(p);
1612                        ret = -EINVAL;
1613                        goto err_free_irq;
1614                }
1615                devm_pinctrl_put(p);
1616        }
1617
1618        OMAP_HSMMC_WRITE(host->base, HCTL,
1619                         OMAP_HSMMC_READ(host->base, HCTL) | IWE);
1620        return 0;
1621
1622err_free_irq:
1623        dev_pm_clear_wake_irq(host->dev);
1624err:
1625        dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n");
1626        host->wake_irq = 0;
1627        return ret;
1628}
1629
1630static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
1631{
1632        u32 hctl, capa, value;
1633
1634        /* Only MMC1 supports 3.0V */
1635        if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
1636                hctl = SDVS30;
1637                capa = VS30 | VS18;
1638        } else {
1639                hctl = SDVS18;
1640                capa = VS18;
1641        }
1642
1643        value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK;
1644        OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl);
1645
1646        value = OMAP_HSMMC_READ(host->base, CAPA);
1647        OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
1648
1649        /* Set SD bus power bit */
1650        set_sd_bus_power(host);
1651}
1652
1653static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
1654                                     unsigned int direction, int blk_size)
1655{
1656        /* This controller can't do multiblock reads due to hw bugs */
1657        if (direction == MMC_DATA_READ)
1658                return 1;
1659
1660        return blk_size;
1661}
1662
1663static struct mmc_host_ops omap_hsmmc_ops = {
1664        .post_req = omap_hsmmc_post_req,
1665        .pre_req = omap_hsmmc_pre_req,
1666        .request = omap_hsmmc_request,
1667        .set_ios = omap_hsmmc_set_ios,
1668        .get_cd = mmc_gpio_get_cd,
1669        .get_ro = mmc_gpio_get_ro,
1670        .init_card = omap_hsmmc_init_card,
1671        .enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
1672};
1673
1674#ifdef CONFIG_DEBUG_FS
1675
1676static int mmc_regs_show(struct seq_file *s, void *data)
1677{
1678        struct mmc_host *mmc = s->private;
1679        struct omap_hsmmc_host *host = mmc_priv(mmc);
1680
1681        seq_printf(s, "mmc%d:\n", mmc->index);
1682        seq_printf(s, "sdio irq mode\t%s\n",
1683                   (mmc->caps & MMC_CAP_SDIO_IRQ) ? "interrupt" : "polling");
1684
1685        if (mmc->caps & MMC_CAP_SDIO_IRQ) {
1686                seq_printf(s, "sdio irq \t%s\n",
1687                           (host->flags & HSMMC_SDIO_IRQ_ENABLED) ?  "enabled"
1688                           : "disabled");
1689        }
1690        seq_printf(s, "ctx_loss:\t%d\n", host->context_loss);
1691
1692        pm_runtime_get_sync(host->dev);
1693        seq_puts(s, "\nregs:\n");
1694        seq_printf(s, "CON:\t\t0x%08x\n",
1695                        OMAP_HSMMC_READ(host->base, CON));
1696        seq_printf(s, "PSTATE:\t\t0x%08x\n",
1697                   OMAP_HSMMC_READ(host->base, PSTATE));
1698        seq_printf(s, "HCTL:\t\t0x%08x\n",
1699                        OMAP_HSMMC_READ(host->base, HCTL));
1700        seq_printf(s, "SYSCTL:\t\t0x%08x\n",
1701                        OMAP_HSMMC_READ(host->base, SYSCTL));
1702        seq_printf(s, "IE:\t\t0x%08x\n",
1703                        OMAP_HSMMC_READ(host->base, IE));
1704        seq_printf(s, "ISE:\t\t0x%08x\n",
1705                        OMAP_HSMMC_READ(host->base, ISE));
1706        seq_printf(s, "CAPA:\t\t0x%08x\n",
1707                        OMAP_HSMMC_READ(host->base, CAPA));
1708
1709        pm_runtime_mark_last_busy(host->dev);
1710        pm_runtime_put_autosuspend(host->dev);
1711
1712        return 0;
1713}
1714
1715DEFINE_SHOW_ATTRIBUTE(mmc_regs);
1716
1717static void omap_hsmmc_debugfs(struct mmc_host *mmc)
1718{
1719        if (mmc->debugfs_root)
1720                debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root,
1721                        mmc, &mmc_regs_fops);
1722}
1723
1724#else
1725
1726static void omap_hsmmc_debugfs(struct mmc_host *mmc)
1727{
1728}
1729
1730#endif
1731
1732#ifdef CONFIG_OF
1733static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = {
1734        /* See 35xx errata 2.1.1.128 in SPRZ278F */
1735        .controller_flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
1736};
1737
1738static const struct omap_mmc_of_data omap4_mmc_of_data = {
1739        .reg_offset = 0x100,
1740};
1741static const struct omap_mmc_of_data am33xx_mmc_of_data = {
1742        .reg_offset = 0x100,
1743        .controller_flags = OMAP_HSMMC_SWAKEUP_MISSING,
1744};
1745
1746static const struct of_device_id omap_mmc_of_match[] = {
1747        {
1748                .compatible = "ti,omap2-hsmmc",
1749        },
1750        {
1751                .compatible = "ti,omap3-pre-es3-hsmmc",
1752                .data = &omap3_pre_es3_mmc_of_data,
1753        },
1754        {
1755                .compatible = "ti,omap3-hsmmc",
1756        },
1757        {
1758                .compatible = "ti,omap4-hsmmc",
1759                .data = &omap4_mmc_of_data,
1760        },
1761        {
1762                .compatible = "ti,am33xx-hsmmc",
1763                .data = &am33xx_mmc_of_data,
1764        },
1765        {},
1766};
1767MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
1768
1769static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
1770{
1771        struct omap_hsmmc_platform_data *pdata, *legacy;
1772        struct device_node *np = dev->of_node;
1773
1774        pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
1775        if (!pdata)
1776                return ERR_PTR(-ENOMEM); /* out of memory */
1777
1778        legacy = dev_get_platdata(dev);
1779        if (legacy && legacy->name)
1780                pdata->name = legacy->name;
1781
1782        if (of_find_property(np, "ti,dual-volt", NULL))
1783                pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
1784
1785        if (of_find_property(np, "ti,non-removable", NULL)) {
1786                pdata->nonremovable = true;
1787                pdata->no_regulator_off_init = true;
1788        }
1789
1790        if (of_find_property(np, "ti,needs-special-reset", NULL))
1791                pdata->features |= HSMMC_HAS_UPDATED_RESET;
1792
1793        if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
1794                pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
1795
1796        return pdata;
1797}
1798#else
1799static inline struct omap_hsmmc_platform_data
1800                        *of_get_hsmmc_pdata(struct device *dev)
1801{
1802        return ERR_PTR(-EINVAL);
1803}
1804#endif
1805
1806static int omap_hsmmc_probe(struct platform_device *pdev)
1807{
1808        struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
1809        struct mmc_host *mmc;
1810        struct omap_hsmmc_host *host = NULL;
1811        struct resource *res;
1812        int ret, irq;
1813        const struct of_device_id *match;
1814        const struct omap_mmc_of_data *data;
1815        void __iomem *base;
1816
1817        match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
1818        if (match) {
1819                pdata = of_get_hsmmc_pdata(&pdev->dev);
1820
1821                if (IS_ERR(pdata))
1822                        return PTR_ERR(pdata);
1823
1824                if (match->data) {
1825                        data = match->data;
1826                        pdata->reg_offset = data->reg_offset;
1827                        pdata->controller_flags |= data->controller_flags;
1828                }
1829        }
1830
1831        if (pdata == NULL) {
1832                dev_err(&pdev->dev, "Platform Data is missing\n");
1833                return -ENXIO;
1834        }
1835
1836        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1837        irq = platform_get_irq(pdev, 0);
1838        if (res == NULL || irq < 0)
1839                return -ENXIO;
1840
1841        base = devm_ioremap_resource(&pdev->dev, res);
1842        if (IS_ERR(base))
1843                return PTR_ERR(base);
1844
1845        mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
1846        if (!mmc) {
1847                ret = -ENOMEM;
1848                goto err;
1849        }
1850
1851        ret = mmc_of_parse(mmc);
1852        if (ret)
1853                goto err1;
1854
1855        host            = mmc_priv(mmc);
1856        host->mmc       = mmc;
1857        host->pdata     = pdata;
1858        host->dev       = &pdev->dev;
1859        host->use_dma   = 1;
1860        host->dma_ch    = -1;
1861        host->irq       = irq;
1862        host->mapbase   = res->start + pdata->reg_offset;
1863        host->base      = base + pdata->reg_offset;
1864        host->power_mode = MMC_POWER_OFF;
1865        host->next_data.cookie = 1;
1866        host->pbias_enabled = 0;
1867        host->vqmmc_enabled = 0;
1868
1869        platform_set_drvdata(pdev, host);
1870
1871        if (pdev->dev.of_node)
1872                host->wake_irq = irq_of_parse_and_map(pdev->dev.of_node, 1);
1873
1874        mmc->ops        = &omap_hsmmc_ops;
1875
1876        mmc->f_min = OMAP_MMC_MIN_CLOCK;
1877
1878        if (pdata->max_freq > 0)
1879                mmc->f_max = pdata->max_freq;
1880        else if (mmc->f_max == 0)
1881                mmc->f_max = OMAP_MMC_MAX_CLOCK;
1882
1883        spin_lock_init(&host->irq_lock);
1884
1885        host->fclk = devm_clk_get(&pdev->dev, "fck");
1886        if (IS_ERR(host->fclk)) {
1887                ret = PTR_ERR(host->fclk);
1888                host->fclk = NULL;
1889                goto err1;
1890        }
1891
1892        if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) {
1893                dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n");
1894                omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk;
1895        }
1896
1897        device_init_wakeup(&pdev->dev, true);
1898        pm_runtime_enable(host->dev);
1899        pm_runtime_get_sync(host->dev);
1900        pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY);
1901        pm_runtime_use_autosuspend(host->dev);
1902
1903        omap_hsmmc_context_save(host);
1904
1905        host->dbclk = devm_clk_get(&pdev->dev, "mmchsdb_fck");
1906        /*
1907         * MMC can still work without debounce clock.
1908         */
1909        if (IS_ERR(host->dbclk)) {
1910                host->dbclk = NULL;
1911        } else if (clk_prepare_enable(host->dbclk) != 0) {
1912                dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
1913                host->dbclk = NULL;
1914        }
1915
1916        /* Set this to a value that allows allocating an entire descriptor
1917         * list within a page (zero order allocation). */
1918        mmc->max_segs = 64;
1919
1920        mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
1921        mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
1922        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
1923
1924        mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
1925                     MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_CMD23;
1926
1927        mmc->caps |= mmc_pdata(host)->caps;
1928        if (mmc->caps & MMC_CAP_8_BIT_DATA)
1929                mmc->caps |= MMC_CAP_4_BIT_DATA;
1930
1931        if (mmc_pdata(host)->nonremovable)
1932                mmc->caps |= MMC_CAP_NONREMOVABLE;
1933
1934        mmc->pm_caps |= mmc_pdata(host)->pm_caps;
1935
1936        omap_hsmmc_conf_bus_power(host);
1937
1938        host->rx_chan = dma_request_chan(&pdev->dev, "rx");
1939        if (IS_ERR(host->rx_chan)) {
1940                dev_err(mmc_dev(host->mmc), "RX DMA channel request failed\n");
1941                ret = PTR_ERR(host->rx_chan);
1942                goto err_irq;
1943        }
1944
1945        host->tx_chan = dma_request_chan(&pdev->dev, "tx");
1946        if (IS_ERR(host->tx_chan)) {
1947                dev_err(mmc_dev(host->mmc), "TX DMA channel request failed\n");
1948                ret = PTR_ERR(host->tx_chan);
1949                goto err_irq;
1950        }
1951
1952        /*
1953         * Limit the maximum segment size to the lower of the request size
1954         * and the DMA engine device segment size limits.  In reality, with
1955         * 32-bit transfers, the DMA engine can do longer segments than this
1956         * but there is no way to represent that in the DMA model - if we
1957         * increase this figure here, we get warnings from the DMA API debug.
1958         */
1959        mmc->max_seg_size = min3(mmc->max_req_size,
1960                        dma_get_max_seg_size(host->rx_chan->device->dev),
1961                        dma_get_max_seg_size(host->tx_chan->device->dev));
1962
1963        /* Request IRQ for MMC operations */
1964        ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
1965                        mmc_hostname(mmc), host);
1966        if (ret) {
1967                dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
1968                goto err_irq;
1969        }
1970
1971        ret = omap_hsmmc_reg_get(host);
1972        if (ret)
1973                goto err_irq;
1974
1975        if (!mmc->ocr_avail)
1976                mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
1977
1978        omap_hsmmc_disable_irq(host);
1979
1980        /*
1981         * For now, only support SDIO interrupt if we have a separate
1982         * wake-up interrupt configured from device tree. This is because
1983         * the wake-up interrupt is needed for idle state and some
1984         * platforms need special quirks. And we don't want to add new
1985         * legacy mux platform init code callbacks any longer as we
1986         * are moving to DT based booting anyways.
1987         */
1988        ret = omap_hsmmc_configure_wake_irq(host);
1989        if (!ret)
1990                mmc->caps |= MMC_CAP_SDIO_IRQ;
1991
1992        mmc_add_host(mmc);
1993
1994        if (mmc_pdata(host)->name != NULL) {
1995                ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
1996                if (ret < 0)
1997                        goto err_slot_name;
1998        }
1999
2000        omap_hsmmc_debugfs(mmc);
2001        pm_runtime_mark_last_busy(host->dev);
2002        pm_runtime_put_autosuspend(host->dev);
2003
2004        return 0;
2005
2006err_slot_name:
2007        mmc_remove_host(mmc);
2008err_irq:
2009        device_init_wakeup(&pdev->dev, false);
2010        if (!IS_ERR_OR_NULL(host->tx_chan))
2011                dma_release_channel(host->tx_chan);
2012        if (!IS_ERR_OR_NULL(host->rx_chan))
2013                dma_release_channel(host->rx_chan);
2014        pm_runtime_dont_use_autosuspend(host->dev);
2015        pm_runtime_put_sync(host->dev);
2016        pm_runtime_disable(host->dev);
2017        if (host->dbclk)
2018                clk_disable_unprepare(host->dbclk);
2019err1:
2020        mmc_free_host(mmc);
2021err:
2022        return ret;
2023}
2024
2025static int omap_hsmmc_remove(struct platform_device *pdev)
2026{
2027        struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
2028
2029        pm_runtime_get_sync(host->dev);
2030        mmc_remove_host(host->mmc);
2031
2032        dma_release_channel(host->tx_chan);
2033        dma_release_channel(host->rx_chan);
2034
2035        dev_pm_clear_wake_irq(host->dev);
2036        pm_runtime_dont_use_autosuspend(host->dev);
2037        pm_runtime_put_sync(host->dev);
2038        pm_runtime_disable(host->dev);
2039        device_init_wakeup(&pdev->dev, false);
2040        if (host->dbclk)
2041                clk_disable_unprepare(host->dbclk);
2042
2043        mmc_free_host(host->mmc);
2044
2045        return 0;
2046}
2047
2048#ifdef CONFIG_PM_SLEEP
2049static int omap_hsmmc_suspend(struct device *dev)
2050{
2051        struct omap_hsmmc_host *host = dev_get_drvdata(dev);
2052
2053        if (!host)
2054                return 0;
2055
2056        pm_runtime_get_sync(host->dev);
2057
2058        if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) {
2059                OMAP_HSMMC_WRITE(host->base, ISE, 0);
2060                OMAP_HSMMC_WRITE(host->base, IE, 0);
2061                OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
2062                OMAP_HSMMC_WRITE(host->base, HCTL,
2063                                OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
2064        }
2065
2066        if (host->dbclk)
2067                clk_disable_unprepare(host->dbclk);
2068
2069        pm_runtime_put_sync(host->dev);
2070        return 0;
2071}
2072
2073/* Routine to resume the MMC device */
2074static int omap_hsmmc_resume(struct device *dev)
2075{
2076        struct omap_hsmmc_host *host = dev_get_drvdata(dev);
2077
2078        if (!host)
2079                return 0;
2080
2081        pm_runtime_get_sync(host->dev);
2082
2083        if (host->dbclk)
2084                clk_prepare_enable(host->dbclk);
2085
2086        if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
2087                omap_hsmmc_conf_bus_power(host);
2088
2089        pm_runtime_mark_last_busy(host->dev);
2090        pm_runtime_put_autosuspend(host->dev);
2091        return 0;
2092}
2093#endif
2094
2095static int omap_hsmmc_runtime_suspend(struct device *dev)
2096{
2097        struct omap_hsmmc_host *host;
2098        unsigned long flags;
2099        int ret = 0;
2100
2101        host = dev_get_drvdata(dev);
2102        omap_hsmmc_context_save(host);
2103        dev_dbg(dev, "disabled\n");
2104
2105        spin_lock_irqsave(&host->irq_lock, flags);
2106        if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
2107            (host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
2108                /* disable sdio irq handling to prevent race */
2109                OMAP_HSMMC_WRITE(host->base, ISE, 0);
2110                OMAP_HSMMC_WRITE(host->base, IE, 0);
2111
2112                if (!(OMAP_HSMMC_READ(host->base, PSTATE) & DLEV_DAT(1))) {
2113                        /*
2114                         * dat1 line low, pending sdio irq
2115                         * race condition: possible irq handler running on
2116                         * multi-core, abort
2117                         */
2118                        dev_dbg(dev, "pending sdio irq, abort suspend\n");
2119                        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
2120                        OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
2121                        OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
2122                        pm_runtime_mark_last_busy(dev);
2123                        ret = -EBUSY;
2124                        goto abort;
2125                }
2126
2127                pinctrl_pm_select_idle_state(dev);
2128        } else {
2129                pinctrl_pm_select_idle_state(dev);
2130        }
2131
2132abort:
2133        spin_unlock_irqrestore(&host->irq_lock, flags);
2134        return ret;
2135}
2136
2137static int omap_hsmmc_runtime_resume(struct device *dev)
2138{
2139        struct omap_hsmmc_host *host;
2140        unsigned long flags;
2141
2142        host = dev_get_drvdata(dev);
2143        omap_hsmmc_context_restore(host);
2144        dev_dbg(dev, "enabled\n");
2145
2146        spin_lock_irqsave(&host->irq_lock, flags);
2147        if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
2148            (host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
2149
2150                pinctrl_select_default_state(host->dev);
2151
2152                /* irq lost, if pinmux incorrect */
2153                OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
2154                OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
2155                OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
2156        } else {
2157                pinctrl_select_default_state(host->dev);
2158        }
2159        spin_unlock_irqrestore(&host->irq_lock, flags);
2160        return 0;
2161}
2162
2163static const struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
2164        SET_SYSTEM_SLEEP_PM_OPS(omap_hsmmc_suspend, omap_hsmmc_resume)
2165        .runtime_suspend = omap_hsmmc_runtime_suspend,
2166        .runtime_resume = omap_hsmmc_runtime_resume,
2167};
2168
2169static struct platform_driver omap_hsmmc_driver = {
2170        .probe          = omap_hsmmc_probe,
2171        .remove         = omap_hsmmc_remove,
2172        .driver         = {
2173                .name = DRIVER_NAME,
2174                .pm = &omap_hsmmc_dev_pm_ops,
2175                .of_match_table = of_match_ptr(omap_mmc_of_match),
2176        },
2177};
2178
2179module_platform_driver(omap_hsmmc_driver);
2180MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
2181MODULE_LICENSE("GPL");
2182MODULE_ALIAS("platform:" DRIVER_NAME);
2183MODULE_AUTHOR("Texas Instruments Inc");
2184