1
2
3
4
5
6config NET_VENDOR_AMD
7 bool "AMD devices"
8 default y
9 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10 SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11 (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
12 help
13 If you have a network (Ethernet) chipset belonging to this class,
14 say Y.
15
16 Note that the answer to this question does not directly affect
17 the kernel: saying N will just cause the configurator to skip all
18 the questions regarding AMD chipsets. If you say Y, you will be asked
19 for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_AMD
22
23config A2065
24 tristate "A2065 support"
25 depends on ZORRO
26 select CRC32
27 help
28 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29 say N.
30
31 To compile this driver as a module, choose M here: the module
32 will be called a2065.
33
34config AMD8111_ETH
35 tristate "AMD 8111 (new PCI LANCE) support"
36 depends on PCI
37 select CRC32
38 select MII
39 help
40 If you have an AMD 8111-based PCI LANCE ethernet card,
41 answer Y here.
42
43 To compile this driver as a module, choose M here. The module
44 will be called amd8111e.
45
46config LANCE
47 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48 depends on ISA && ISA_DMA_API && !ARM && !PPC32
49 help
50 If you have a network (Ethernet) card of this type, say Y here.
51 Some LinkSys cards are of this type.
52
53 To compile this driver as a module, choose M here: the module
54 will be called lance. This is recommended.
55
56config PCNET32
57 tristate "AMD PCnet32 PCI support"
58 depends on PCI
59 select CRC32
60 select MII
61 help
62 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
63 answer Y here.
64
65 To compile this driver as a module, choose M here. The module
66 will be called pcnet32.
67
68config ARIADNE
69 tristate "Ariadne support"
70 depends on ZORRO
71 help
72 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
73 Otherwise, say N.
74
75 To compile this driver as a module, choose M here: the module
76 will be called ariadne.
77
78config ARM_AM79C961A
79 bool "ARM EBSA110 AM79C961A support"
80 depends on ARM && ARCH_EBSA110
81 select CRC32
82 help
83 If you wish to compile a kernel for the EBSA-110, then you should
84 always answer Y to this.
85
86config ATARILANCE
87 tristate "Atari LANCE support"
88 depends on ATARI
89 help
90 Say Y to include support for several Atari Ethernet adapters based
91 on the AMD LANCE chipset: RieblCard (with or without battery), or
92 PAMCard VME (also the version by Rhotron, with different addresses).
93
94config DECLANCE
95 tristate "DEC LANCE ethernet controller support"
96 depends on MACH_DECSTATION
97 select CRC32
98 help
99 This driver is for the series of Ethernet controllers produced by
100 DEC (now Compaq) based on the AMD LANCE chipset, including the
101 DEPCA series. (This chipset is better known via the NE2100 cards.)
102
103config HPLANCE
104 tristate "HP on-board LANCE support"
105 depends on DIO
106 select CRC32
107 help
108 If you want to use the builtin "LANCE" Ethernet controller on an
109 HP300 machine, say Y here.
110
111config MIPS_AU1X00_ENET
112 tristate "MIPS AU1000 Ethernet support"
113 depends on MIPS_ALCHEMY
114 select PHYLIB
115 select CRC32
116 help
117 If you have an Alchemy Semi AU1X00 based system
118 say Y. Otherwise, say N.
119
120config MVME147_NET
121 tristate "MVME147 (LANCE) Ethernet support"
122 depends on MVME147
123 select CRC32
124 help
125 Support for the on-board Ethernet interface on the Motorola MVME147
126 single-board computer. Say Y here to include the
127 driver for this chip in your kernel.
128 To compile this driver as a module, choose M here.
129
130config PCMCIA_NMCLAN
131 tristate "New Media PCMCIA support"
132 depends on PCMCIA
133 help
134 Say Y here if you intend to attach a New Media Ethernet or LiveWire
135 PCMCIA (PC-card) Ethernet card to your computer.
136
137 To compile this driver as a module, choose M here: the module will be
138 called nmclan_cs. If unsure, say N.
139
140config NI65
141 tristate "NI6510 support"
142 depends on ISA && ISA_DMA_API && !ARM && !PPC32
143 help
144 If you have a network (Ethernet) card of this type, say Y here.
145
146 To compile this driver as a module, choose M here. The module
147 will be called ni65.
148
149config SUN3LANCE
150 tristate "Sun3/Sun3x on-board LANCE support"
151 depends on (SUN3 || SUN3X)
152 help
153 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
154 featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
155 here to compile in the Linux driver for this and enable Ethernet.
156 General Linux information on the Sun 3 and 3x series (now
157 discontinued) is at
158 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
159
160 If you're not building a kernel for a Sun 3, say N.
161
162config SUNLANCE
163 tristate "Sun LANCE support"
164 depends on SBUS
165 select CRC32
166 help
167 This driver supports the "le" interface present on all 32-bit Sparc
168 systems, on some older Ultra systems and as an Sbus option. These
169 cards are based on the AMD LANCE chipset, which is better known
170 via the NE2100 cards.
171
172 To compile this driver as a module, choose M here: the module
173 will be called sunlance.
174
175config AMD_XGBE
176 tristate "AMD 10GbE Ethernet driver"
177 depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
178 depends on X86 || ARM64 || COMPILE_TEST
179 select BITREVERSE
180 select CRC32
181 select PHYLIB
182 select AMD_XGBE_HAVE_ECC if X86
183 imply PTP_1588_CLOCK
184 help
185 This driver supports the AMD 10GbE Ethernet device found on an
186 AMD SoC.
187
188 To compile this driver as a module, choose M here: the module
189 will be called amd-xgbe.
190
191config AMD_XGBE_DCB
192 bool "Data Center Bridging (DCB) support"
193 default n
194 depends on AMD_XGBE && DCB
195 help
196 Say Y here to enable Data Center Bridging (DCB) support in the
197 driver.
198
199 If unsure, say N.
200
201config AMD_XGBE_HAVE_ECC
202 bool
203 default n
204
205endif
206
