linux/drivers/scsi/isci/host.h
<<
>>
Prefs
   1/*
   2 * This file is provided under a dual BSD/GPLv2 license.  When using or
   3 * redistributing this file, you may do so under either license.
   4 *
   5 * GPL LICENSE SUMMARY
   6 *
   7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of version 2 of the GNU General Public License as
  11 * published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21 * The full GNU General Public License is included in this distribution
  22 * in the file called LICENSE.GPL.
  23 *
  24 * BSD LICENSE
  25 *
  26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27 * All rights reserved.
  28 *
  29 * Redistribution and use in source and binary forms, with or without
  30 * modification, are permitted provided that the following conditions
  31 * are met:
  32 *
  33 *   * Redistributions of source code must retain the above copyright
  34 *     notice, this list of conditions and the following disclaimer.
  35 *   * Redistributions in binary form must reproduce the above copyright
  36 *     notice, this list of conditions and the following disclaimer in
  37 *     the documentation and/or other materials provided with the
  38 *     distribution.
  39 *   * Neither the name of Intel Corporation nor the names of its
  40 *     contributors may be used to endorse or promote products derived
  41 *     from this software without specific prior written permission.
  42 *
  43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54 */
  55#ifndef _SCI_HOST_H_
  56#define _SCI_HOST_H_
  57
  58#include <scsi/sas_ata.h>
  59#include "remote_device.h"
  60#include "phy.h"
  61#include "isci.h"
  62#include "remote_node_table.h"
  63#include "registers.h"
  64#include "unsolicited_frame_control.h"
  65#include "probe_roms.h"
  66
  67struct isci_request;
  68struct scu_task_context;
  69
  70
  71/**
  72 * struct sci_power_control -
  73 *
  74 * This structure defines the fields for managing power control for direct
  75 * attached disk devices.
  76 */
  77struct sci_power_control {
  78        /**
  79         * This field is set when the power control timer is running and cleared when
  80         * it is not.
  81         */
  82        bool timer_started;
  83
  84        /**
  85         * Timer to control when the directed attached disks can consume power.
  86         */
  87        struct sci_timer timer;
  88
  89        /**
  90         * This field is used to keep track of how many phys are put into the
  91         * requesters field.
  92         */
  93        u8 phys_waiting;
  94
  95        /**
  96         * This field is used to keep track of how many phys have been granted to consume power
  97         */
  98        u8 phys_granted_power;
  99
 100        /**
 101         * This field is an array of phys that we are waiting on. The phys are direct
 102         * mapped into requesters via struct sci_phy.phy_index
 103         */
 104        struct isci_phy *requesters[SCI_MAX_PHYS];
 105
 106};
 107
 108struct sci_port_configuration_agent;
 109typedef void (*port_config_fn)(struct isci_host *,
 110                               struct sci_port_configuration_agent *,
 111                               struct isci_port *, struct isci_phy *);
 112bool is_port_config_apc(struct isci_host *ihost);
 113bool is_controller_start_complete(struct isci_host *ihost);
 114
 115struct sci_port_configuration_agent {
 116        u16 phy_configured_mask;
 117        u16 phy_ready_mask;
 118        struct {
 119                u8 min_index;
 120                u8 max_index;
 121        } phy_valid_port_range[SCI_MAX_PHYS];
 122        bool timer_pending;
 123        port_config_fn link_up_handler;
 124        port_config_fn link_down_handler;
 125        struct sci_timer        timer;
 126};
 127
 128/**
 129 * isci_host - primary host/controller object
 130 * @timer: timeout start/stop operations
 131 * @device_table: rni (hw remote node index) to remote device lookup table
 132 * @available_remote_nodes: rni allocator
 133 * @power_control: manage device spin up
 134 * @io_request_sequence: generation number for tci's (task contexts)
 135 * @task_context_table: hw task context table
 136 * @remote_node_context_table: hw remote node context table
 137 * @completion_queue: hw-producer driver-consumer communication ring
 138 * @completion_queue_get: tracks the driver 'head' of the ring to notify hw
 139 * @logical_port_entries: min({driver|silicon}-supported-port-count)
 140 * @remote_node_entries: min({driver|silicon}-supported-node-count)
 141 * @task_context_entries: min({driver|silicon}-supported-task-count)
 142 * @phy_timer: phy startup timer
 143 * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for
 144 *                    the phy index is set so further notifications are not
 145 *                    made.  Once the phy reports link up and is made part of a
 146 *                    port then this bit is cleared.
 147
 148 */
 149struct isci_host {
 150        struct sci_base_state_machine sm;
 151        /* XXX can we time this externally */
 152        struct sci_timer timer;
 153        /* XXX drop reference module params directly */
 154        struct sci_user_parameters user_parameters;
 155        /* XXX no need to be a union */
 156        struct sci_oem_params oem_parameters;
 157        struct sci_port_configuration_agent port_agent;
 158        struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
 159        struct sci_remote_node_table available_remote_nodes;
 160        struct sci_power_control power_control;
 161        u8 io_request_sequence[SCI_MAX_IO_REQUESTS];
 162        struct scu_task_context *task_context_table;
 163        dma_addr_t tc_dma;
 164        union scu_remote_node_context *remote_node_context_table;
 165        dma_addr_t rnc_dma;
 166        u32 *completion_queue;
 167        dma_addr_t cq_dma;
 168        u32 completion_queue_get;
 169        u32 logical_port_entries;
 170        u32 remote_node_entries;
 171        u32 task_context_entries;
 172        void *ufi_buf;
 173        dma_addr_t ufi_dma;
 174        struct sci_unsolicited_frame_control uf_control;
 175
 176        /* phy startup */
 177        struct sci_timer phy_timer;
 178        /* XXX kill */
 179        bool phy_startup_timer_pending;
 180        u32 next_phy_to_start;
 181        /* XXX convert to unsigned long and use bitops */
 182        u8 invalid_phy_mask;
 183
 184        /* TODO attempt dynamic interrupt coalescing scheme */
 185        u16 interrupt_coalesce_number;
 186        u32 interrupt_coalesce_timeout;
 187        struct smu_registers __iomem *smu_registers;
 188        struct scu_registers __iomem *scu_registers;
 189
 190        u16 tci_head;
 191        u16 tci_tail;
 192        u16 tci_pool[SCI_MAX_IO_REQUESTS];
 193
 194        int id; /* unique within a given pci device */
 195        struct isci_phy phys[SCI_MAX_PHYS];
 196        struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
 197        struct asd_sas_port sas_ports[SCI_MAX_PORTS];
 198        struct sas_ha_struct sas_ha;
 199
 200        struct pci_dev *pdev;
 201        #define IHOST_START_PENDING 0
 202        #define IHOST_STOP_PENDING 1
 203        #define IHOST_IRQ_ENABLED 2
 204        unsigned long flags;
 205        wait_queue_head_t eventq;
 206        struct tasklet_struct completion_tasklet;
 207        spinlock_t scic_lock;
 208        struct isci_request *reqs[SCI_MAX_IO_REQUESTS];
 209        struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
 210};
 211
 212/**
 213 * enum sci_controller_states - This enumeration depicts all the states
 214 *    for the common controller state machine.
 215 */
 216enum sci_controller_states {
 217        /**
 218         * Simply the initial state for the base controller state machine.
 219         */
 220        SCIC_INITIAL = 0,
 221
 222        /**
 223         * This state indicates that the controller is reset.  The memory for
 224         * the controller is in it's initial state, but the controller requires
 225         * initialization.
 226         * This state is entered from the INITIAL state.
 227         * This state is entered from the RESETTING state.
 228         */
 229        SCIC_RESET,
 230
 231        /**
 232         * This state is typically an action state that indicates the controller
 233         * is in the process of initialization.  In this state no new IO operations
 234         * are permitted.
 235         * This state is entered from the RESET state.
 236         */
 237        SCIC_INITIALIZING,
 238
 239        /**
 240         * This state indicates that the controller has been successfully
 241         * initialized.  In this state no new IO operations are permitted.
 242         * This state is entered from the INITIALIZING state.
 243         */
 244        SCIC_INITIALIZED,
 245
 246        /**
 247         * This state indicates the the controller is in the process of becoming
 248         * ready (i.e. starting).  In this state no new IO operations are permitted.
 249         * This state is entered from the INITIALIZED state.
 250         */
 251        SCIC_STARTING,
 252
 253        /**
 254         * This state indicates the controller is now ready.  Thus, the user
 255         * is able to perform IO operations on the controller.
 256         * This state is entered from the STARTING state.
 257         */
 258        SCIC_READY,
 259
 260        /**
 261         * This state is typically an action state that indicates the controller
 262         * is in the process of resetting.  Thus, the user is unable to perform
 263         * IO operations on the controller.  A reset is considered destructive in
 264         * most cases.
 265         * This state is entered from the READY state.
 266         * This state is entered from the FAILED state.
 267         * This state is entered from the STOPPED state.
 268         */
 269        SCIC_RESETTING,
 270
 271        /**
 272         * This state indicates that the controller is in the process of stopping.
 273         * In this state no new IO operations are permitted, but existing IO
 274         * operations are allowed to complete.
 275         * This state is entered from the READY state.
 276         */
 277        SCIC_STOPPING,
 278
 279        /**
 280         * This state indicates that the controller could not successfully be
 281         * initialized.  In this state no new IO operations are permitted.
 282         * This state is entered from the INITIALIZING state.
 283         * This state is entered from the STARTING state.
 284         * This state is entered from the STOPPING state.
 285         * This state is entered from the RESETTING state.
 286         */
 287        SCIC_FAILED,
 288};
 289
 290/**
 291 * struct isci_pci_info - This class represents the pci function containing the
 292 *    controllers. Depending on PCI SKU, there could be up to 2 controllers in
 293 *    the PCI function.
 294 */
 295#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
 296
 297struct isci_pci_info {
 298        struct isci_host *hosts[SCI_MAX_CONTROLLERS];
 299        struct isci_orom *orom;
 300};
 301
 302static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
 303{
 304        return pci_get_drvdata(pdev);
 305}
 306
 307static inline struct Scsi_Host *to_shost(struct isci_host *ihost)
 308{
 309        return ihost->sas_ha.core.shost;
 310}
 311
 312#define for_each_isci_host(id, ihost, pdev) \
 313        for (id = 0; id < SCI_MAX_CONTROLLERS && \
 314             (ihost = to_pci_info(pdev)->hosts[id]); id++)
 315
 316static inline void wait_for_start(struct isci_host *ihost)
 317{
 318        wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
 319}
 320
 321static inline void wait_for_stop(struct isci_host *ihost)
 322{
 323        wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
 324}
 325
 326static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
 327{
 328        wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
 329}
 330
 331static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
 332{
 333        wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
 334}
 335
 336static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
 337{
 338        return dev->port->ha->lldd_ha;
 339}
 340
 341static inline struct isci_host *idev_to_ihost(struct isci_remote_device *idev)
 342{
 343        return dev_to_ihost(idev->domain_dev);
 344}
 345
 346/* we always use protocol engine group zero */
 347#define ISCI_PEG 0
 348
 349/* see sci_controller_io_tag_allocate|free for how seq and tci are built */
 350#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci)
 351
 352/* these are returned by the hardware, so sanitize them */
 353#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
 354#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
 355
 356/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
 357#define ISCI_COALESCE_BASE 9
 358
 359/* expander attached sata devices require 3 rnc slots */
 360static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
 361{
 362        struct domain_device *dev = idev->domain_dev;
 363
 364        if (dev_is_sata(dev) && dev->parent)
 365                return SCU_STP_REMOTE_NODE_COUNT;
 366        return SCU_SSP_REMOTE_NODE_COUNT;
 367}
 368
 369/**
 370 * sci_controller_clear_invalid_phy() -
 371 *
 372 * This macro will clear the bit in the invalid phy mask for this controller
 373 * object.  This is used to control messages reported for invalid link up
 374 * notifications.
 375 */
 376#define sci_controller_clear_invalid_phy(controller, phy) \
 377        ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
 378
 379static inline struct device *scirdev_to_dev(struct isci_remote_device *idev)
 380{
 381        if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
 382                return NULL;
 383
 384        return &idev->isci_port->isci_host->pdev->dev;
 385}
 386
 387static inline bool is_a2(struct pci_dev *pdev)
 388{
 389        if (pdev->revision < 4)
 390                return true;
 391        return false;
 392}
 393
 394static inline bool is_b0(struct pci_dev *pdev)
 395{
 396        if (pdev->revision == 4)
 397                return true;
 398        return false;
 399}
 400
 401static inline bool is_c0(struct pci_dev *pdev)
 402{
 403        if (pdev->revision == 5)
 404                return true;
 405        return false;
 406}
 407
 408static inline bool is_c1(struct pci_dev *pdev)
 409{
 410        if (pdev->revision >= 6)
 411                return true;
 412        return false;
 413}
 414
 415enum cable_selections {
 416        short_cable     = 0,
 417        long_cable      = 1,
 418        medium_cable    = 2,
 419        undefined_cable = 3
 420};
 421
 422#define CABLE_OVERRIDE_DISABLED (0x10000)
 423
 424static inline int is_cable_select_overridden(void)
 425{
 426        return cable_selection_override < CABLE_OVERRIDE_DISABLED;
 427}
 428
 429enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy);
 430void validate_cable_selections(struct isci_host *ihost);
 431char *lookup_cable_names(enum cable_selections);
 432
 433/* set hw control for 'activity', even though active enclosures seem to drive
 434 * the activity led on their own.  Skip setting FSENG control on 'status' due
 435 * to unexpected operation and 'error' due to not being a supported automatic
 436 * FSENG output
 437 */
 438#define SGPIO_HW_CONTROL 0x00000443
 439
 440static inline int isci_gpio_count(struct isci_host *ihost)
 441{
 442        return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select);
 443}
 444
 445void sci_controller_post_request(struct isci_host *ihost,
 446                                      u32 request);
 447void sci_controller_release_frame(struct isci_host *ihost,
 448                                       u32 frame_index);
 449void sci_controller_copy_sata_response(void *response_buffer,
 450                                            void *frame_header,
 451                                            void *frame_buffer);
 452enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
 453                                                                 struct isci_remote_device *idev,
 454                                                                 u16 *node_id);
 455void sci_controller_free_remote_node_context(
 456        struct isci_host *ihost,
 457        struct isci_remote_device *idev,
 458        u16 node_id);
 459
 460struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag);
 461void sci_controller_power_control_queue_insert(struct isci_host *ihost,
 462                                               struct isci_phy *iphy);
 463void sci_controller_power_control_queue_remove(struct isci_host *ihost,
 464                                               struct isci_phy *iphy);
 465void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport,
 466                            struct isci_phy *iphy);
 467void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport,
 468                              struct isci_phy *iphy);
 469void sci_controller_remote_device_stopped(struct isci_host *ihost,
 470                                          struct isci_remote_device *idev);
 471
 472enum sci_status sci_controller_continue_io(struct isci_request *ireq);
 473int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
 474void isci_host_start(struct Scsi_Host *);
 475u16 isci_alloc_tag(struct isci_host *ihost);
 476enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag);
 477void isci_tci_free(struct isci_host *ihost, u16 tci);
 478void ireq_done(struct isci_host *ihost, struct isci_request *ireq, struct sas_task *task);
 479
 480int isci_host_init(struct isci_host *);
 481void isci_host_completion_routine(unsigned long data);
 482void isci_host_deinit(struct isci_host *);
 483void sci_controller_disable_interrupts(struct isci_host *ihost);
 484bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost);
 485void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status);
 486
 487enum sci_status sci_controller_start_io(
 488        struct isci_host *ihost,
 489        struct isci_remote_device *idev,
 490        struct isci_request *ireq);
 491
 492enum sci_status sci_controller_start_task(
 493        struct isci_host *ihost,
 494        struct isci_remote_device *idev,
 495        struct isci_request *ireq);
 496
 497enum sci_status sci_controller_terminate_request(
 498        struct isci_host *ihost,
 499        struct isci_remote_device *idev,
 500        struct isci_request *ireq);
 501
 502enum sci_status sci_controller_complete_io(
 503        struct isci_host *ihost,
 504        struct isci_remote_device *idev,
 505        struct isci_request *ireq);
 506
 507void sci_port_configuration_agent_construct(
 508        struct sci_port_configuration_agent *port_agent);
 509
 510enum sci_status sci_port_configuration_agent_initialize(
 511        struct isci_host *ihost,
 512        struct sci_port_configuration_agent *port_agent);
 513
 514int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
 515                    u8 reg_count, u8 *write_data);
 516#endif
 517