1
2
3
4
5
6
7
8
9
10
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/sched.h>
14#include <linux/init.h>
15#include <linux/list.h>
16#include <linux/io.h>
17#include <linux/of.h>
18#include <linux/platform_device.h>
19#include <linux/dma-mapping.h>
20#include <linux/pm_runtime.h>
21#include <linux/err.h>
22#include <linux/delay.h>
23#include <linux/usb/musb.h>
24#include <linux/phy/omap_control_phy.h>
25#include <linux/of_platform.h>
26
27#include "musb_core.h"
28#include "omap2430.h"
29
30struct omap2430_glue {
31 struct device *dev;
32 struct platform_device *musb;
33 enum musb_vbus_id_status status;
34 struct work_struct omap_musb_mailbox_work;
35 struct device *control_otghs;
36};
37#define glue_to_musb(g) platform_get_drvdata(g->musb)
38
39static struct omap2430_glue *_glue;
40
41static inline void omap2430_low_level_exit(struct musb *musb)
42{
43 u32 l;
44
45
46 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
47 l |= ENABLEFORCE;
48 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
49}
50
51static inline void omap2430_low_level_init(struct musb *musb)
52{
53 u32 l;
54
55 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
56 l &= ~ENABLEFORCE;
57 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
58}
59
60static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
61{
62 struct omap2430_glue *glue = _glue;
63
64 if (!glue) {
65 pr_err("%s: musb core is not yet initialized\n", __func__);
66 return -EPROBE_DEFER;
67 }
68 glue->status = status;
69
70 if (!glue_to_musb(glue)) {
71 pr_err("%s: musb core is not yet ready\n", __func__);
72 return -EPROBE_DEFER;
73 }
74
75 schedule_work(&glue->omap_musb_mailbox_work);
76
77 return 0;
78}
79
80
81
82
83
84
85
86
87static void omap_musb_set_mailbox(struct omap2430_glue *glue)
88{
89 struct musb *musb = glue_to_musb(glue);
90 int error;
91
92 pm_runtime_get_sync(musb->controller);
93
94 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
95 usb_otg_state_string(musb->xceiv->otg->state),
96 musb_readb(musb->mregs, MUSB_DEVCTL));
97
98 switch (glue->status) {
99 case MUSB_ID_GROUND:
100 dev_dbg(musb->controller, "ID GND\n");
101 switch (musb->xceiv->otg->state) {
102 case OTG_STATE_A_IDLE:
103 error = musb_set_host(musb);
104 if (error)
105 break;
106 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
107 fallthrough;
108 case OTG_STATE_A_WAIT_VRISE:
109 case OTG_STATE_A_WAIT_BCON:
110 case OTG_STATE_A_HOST:
111
112
113
114
115 otg_set_vbus(musb->xceiv->otg, 1);
116 break;
117 default:
118 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
119 musb->xceiv->last_event = USB_EVENT_ID;
120 if (musb->gadget_driver) {
121 omap_control_usb_set_mode(glue->control_otghs,
122 USB_MODE_HOST);
123 otg_set_vbus(musb->xceiv->otg, 1);
124 }
125 break;
126 }
127 break;
128
129 case MUSB_VBUS_VALID:
130 dev_dbg(musb->controller, "VBUS Connect\n");
131
132 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
133 musb->xceiv->last_event = USB_EVENT_VBUS;
134 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
135 break;
136
137 case MUSB_ID_FLOAT:
138 case MUSB_VBUS_OFF:
139 dev_dbg(musb->controller, "VBUS Disconnect\n");
140
141 musb->xceiv->last_event = USB_EVENT_NONE;
142 musb_set_peripheral(musb);
143 otg_set_vbus(musb->xceiv->otg, 0);
144 omap_control_usb_set_mode(glue->control_otghs,
145 USB_MODE_DISCONNECT);
146 break;
147 default:
148 dev_dbg(musb->controller, "ID float\n");
149 }
150 pm_runtime_mark_last_busy(musb->controller);
151 pm_runtime_put_autosuspend(musb->controller);
152 atomic_notifier_call_chain(&musb->xceiv->notifier,
153 musb->xceiv->last_event, NULL);
154}
155
156
157static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
158{
159 struct omap2430_glue *glue = container_of(mailbox_work,
160 struct omap2430_glue, omap_musb_mailbox_work);
161
162 omap_musb_set_mailbox(glue);
163}
164
165static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
166{
167 unsigned long flags;
168 irqreturn_t retval = IRQ_NONE;
169 struct musb *musb = __hci;
170
171 spin_lock_irqsave(&musb->lock, flags);
172
173 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
174 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
175 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
176
177 if (musb->int_usb || musb->int_tx || musb->int_rx)
178 retval = musb_interrupt(musb);
179
180 spin_unlock_irqrestore(&musb->lock, flags);
181
182 return retval;
183}
184
185static int omap2430_musb_init(struct musb *musb)
186{
187 u32 l;
188 int status = 0;
189 struct device *dev = musb->controller;
190 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
191 struct omap_musb_board_data *data = plat->board_data;
192
193
194
195
196
197 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
198
199
200
201
202
203
204
205 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
206
207 if (IS_ERR(musb->xceiv)) {
208 status = PTR_ERR(musb->xceiv);
209
210 if (status == -ENXIO)
211 return status;
212
213 dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
214 return -EPROBE_DEFER;
215 }
216
217 if (IS_ERR(musb->phy)) {
218 dev_err(dev, "HS USB OTG: no PHY configured\n");
219 return PTR_ERR(musb->phy);
220 }
221 musb->isr = omap2430_musb_interrupt;
222 phy_init(musb->phy);
223 phy_power_on(musb->phy);
224
225 l = musb_readl(musb->mregs, OTG_INTERFSEL);
226
227 if (data->interface_type == MUSB_INTERFACE_UTMI) {
228
229 l &= ~ULPI_12PIN;
230 l |= UTMI_8BIT;
231 } else {
232 l |= ULPI_12PIN;
233 }
234
235 musb_writel(musb->mregs, OTG_INTERFSEL, l);
236
237 dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
238 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
239 musb_readl(musb->mregs, OTG_REVISION),
240 musb_readl(musb->mregs, OTG_SYSCONFIG),
241 musb_readl(musb->mregs, OTG_SYSSTATUS),
242 musb_readl(musb->mregs, OTG_INTERFSEL),
243 musb_readl(musb->mregs, OTG_SIMENABLE));
244
245 return 0;
246}
247
248static void omap2430_musb_enable(struct musb *musb)
249{
250 struct device *dev = musb->controller;
251 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
252
253 if (glue->status == MUSB_UNKNOWN)
254 glue->status = MUSB_VBUS_OFF;
255 omap_musb_set_mailbox(glue);
256}
257
258static void omap2430_musb_disable(struct musb *musb)
259{
260 struct device *dev = musb->controller;
261 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
262
263 if (glue->status != MUSB_UNKNOWN)
264 omap_control_usb_set_mode(glue->control_otghs,
265 USB_MODE_DISCONNECT);
266}
267
268static int omap2430_musb_exit(struct musb *musb)
269{
270 struct device *dev = musb->controller;
271 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
272
273 omap2430_low_level_exit(musb);
274 phy_power_off(musb->phy);
275 phy_exit(musb->phy);
276 musb->phy = NULL;
277 cancel_work_sync(&glue->omap_musb_mailbox_work);
278
279 return 0;
280}
281
282static const struct musb_platform_ops omap2430_ops = {
283 .quirks = MUSB_DMA_INVENTRA,
284#ifdef CONFIG_USB_INVENTRA_DMA
285 .dma_init = musbhs_dma_controller_create,
286 .dma_exit = musbhs_dma_controller_destroy,
287#endif
288 .init = omap2430_musb_init,
289 .exit = omap2430_musb_exit,
290
291 .enable = omap2430_musb_enable,
292 .disable = omap2430_musb_disable,
293
294 .phy_callback = omap2430_musb_mailbox,
295};
296
297static u64 omap2430_dmamask = DMA_BIT_MASK(32);
298
299static int omap2430_probe(struct platform_device *pdev)
300{
301 struct resource musb_resources[3];
302 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
303 struct omap_musb_board_data *data;
304 struct platform_device *musb;
305 struct omap2430_glue *glue;
306 struct device_node *np = pdev->dev.of_node;
307 struct musb_hdrc_config *config;
308 struct device_node *control_node;
309 struct platform_device *control_pdev;
310 int ret = -ENOMEM, val;
311
312 if (!np)
313 return -ENODEV;
314
315 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
316 if (!glue)
317 goto err0;
318
319 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
320 if (!musb) {
321 dev_err(&pdev->dev, "failed to allocate musb device\n");
322 goto err0;
323 }
324
325 musb->dev.parent = &pdev->dev;
326 musb->dev.dma_mask = &omap2430_dmamask;
327 musb->dev.coherent_dma_mask = omap2430_dmamask;
328
329 glue->dev = &pdev->dev;
330 glue->musb = musb;
331 glue->status = MUSB_UNKNOWN;
332 glue->control_otghs = ERR_PTR(-ENODEV);
333
334 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
335 if (!pdata)
336 goto err2;
337
338 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
339 if (!data)
340 goto err2;
341
342 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
343 if (!config)
344 goto err2;
345
346 of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
347 of_property_read_u32(np, "interface-type",
348 (u32 *)&data->interface_type);
349 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
350 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
351 of_property_read_u32(np, "power", (u32 *)&pdata->power);
352
353 ret = of_property_read_u32(np, "multipoint", &val);
354 if (!ret && val)
355 config->multipoint = true;
356
357 pdata->board_data = data;
358 pdata->config = config;
359
360 control_node = of_parse_phandle(np, "ctrl-module", 0);
361 if (control_node) {
362 control_pdev = of_find_device_by_node(control_node);
363 if (!control_pdev) {
364 dev_err(&pdev->dev, "Failed to get control device\n");
365 ret = -EINVAL;
366 goto err2;
367 }
368 glue->control_otghs = &control_pdev->dev;
369 }
370
371 pdata->platform_ops = &omap2430_ops;
372
373 platform_set_drvdata(pdev, glue);
374
375
376
377
378
379 _glue = glue;
380
381 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
382
383 memset(musb_resources, 0x00, sizeof(*musb_resources) *
384 ARRAY_SIZE(musb_resources));
385
386 musb_resources[0].name = pdev->resource[0].name;
387 musb_resources[0].start = pdev->resource[0].start;
388 musb_resources[0].end = pdev->resource[0].end;
389 musb_resources[0].flags = pdev->resource[0].flags;
390
391 musb_resources[1].name = pdev->resource[1].name;
392 musb_resources[1].start = pdev->resource[1].start;
393 musb_resources[1].end = pdev->resource[1].end;
394 musb_resources[1].flags = pdev->resource[1].flags;
395
396 musb_resources[2].name = pdev->resource[2].name;
397 musb_resources[2].start = pdev->resource[2].start;
398 musb_resources[2].end = pdev->resource[2].end;
399 musb_resources[2].flags = pdev->resource[2].flags;
400
401 ret = platform_device_add_resources(musb, musb_resources,
402 ARRAY_SIZE(musb_resources));
403 if (ret) {
404 dev_err(&pdev->dev, "failed to add resources\n");
405 goto err2;
406 }
407
408 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
409 if (ret) {
410 dev_err(&pdev->dev, "failed to add platform_data\n");
411 goto err2;
412 }
413
414 pm_runtime_enable(glue->dev);
415
416 ret = platform_device_add(musb);
417 if (ret) {
418 dev_err(&pdev->dev, "failed to register musb device\n");
419 goto err3;
420 }
421
422 return 0;
423
424err3:
425 pm_runtime_disable(glue->dev);
426
427err2:
428 platform_device_put(musb);
429
430err0:
431 return ret;
432}
433
434static int omap2430_remove(struct platform_device *pdev)
435{
436 struct omap2430_glue *glue = platform_get_drvdata(pdev);
437
438 platform_device_unregister(glue->musb);
439 pm_runtime_disable(glue->dev);
440
441 return 0;
442}
443
444#ifdef CONFIG_PM
445
446static int omap2430_runtime_suspend(struct device *dev)
447{
448 struct omap2430_glue *glue = dev_get_drvdata(dev);
449 struct musb *musb = glue_to_musb(glue);
450
451 if (!musb)
452 return 0;
453
454 musb->context.otg_interfsel = musb_readl(musb->mregs,
455 OTG_INTERFSEL);
456
457 omap2430_low_level_exit(musb);
458
459 phy_power_off(musb->phy);
460 phy_exit(musb->phy);
461
462 return 0;
463}
464
465static int omap2430_runtime_resume(struct device *dev)
466{
467 struct omap2430_glue *glue = dev_get_drvdata(dev);
468 struct musb *musb = glue_to_musb(glue);
469
470 if (!musb)
471 return 0;
472
473 phy_init(musb->phy);
474 phy_power_on(musb->phy);
475
476 omap2430_low_level_init(musb);
477 musb_writel(musb->mregs, OTG_INTERFSEL,
478 musb->context.otg_interfsel);
479
480
481 usleep_range(200000, 250000);
482
483 return 0;
484}
485
486static const struct dev_pm_ops omap2430_pm_ops = {
487 .runtime_suspend = omap2430_runtime_suspend,
488 .runtime_resume = omap2430_runtime_resume,
489};
490
491#define DEV_PM_OPS (&omap2430_pm_ops)
492#else
493#define DEV_PM_OPS NULL
494#endif
495
496#ifdef CONFIG_OF
497static const struct of_device_id omap2430_id_table[] = {
498 {
499 .compatible = "ti,omap4-musb"
500 },
501 {
502 .compatible = "ti,omap3-musb"
503 },
504 {},
505};
506MODULE_DEVICE_TABLE(of, omap2430_id_table);
507#endif
508
509static struct platform_driver omap2430_driver = {
510 .probe = omap2430_probe,
511 .remove = omap2430_remove,
512 .driver = {
513 .name = "musb-omap2430",
514 .pm = DEV_PM_OPS,
515 .of_match_table = of_match_ptr(omap2430_id_table),
516 },
517};
518
519module_platform_driver(omap2430_driver);
520
521MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
522MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
523MODULE_LICENSE("GPL v2");
524
