linux/net/hsr/hsr_slave.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/* Copyright 2011-2014 Autronica Fire and Security AS
   3 *
   4 * Author(s):
   5 *      2011-2014 Arvid Brodin, arvid.brodin@alten.se
   6 *
   7 * Frame handler other utility functions for HSR and PRP.
   8 */
   9
  10#include "hsr_slave.h"
  11#include <linux/etherdevice.h>
  12#include <linux/if_arp.h>
  13#include <linux/if_vlan.h>
  14#include "hsr_main.h"
  15#include "hsr_device.h"
  16#include "hsr_forward.h"
  17#include "hsr_framereg.h"
  18
  19bool hsr_invalid_dan_ingress_frame(__be16 protocol)
  20{
  21        return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
  22}
  23
  24static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
  25{
  26        struct sk_buff *skb = *pskb;
  27        struct hsr_port *port;
  28        struct hsr_priv *hsr;
  29        __be16 protocol;
  30
  31        /* Packets from dev_loopback_xmit() do not have L2 header, bail out */
  32        if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
  33                return RX_HANDLER_PASS;
  34
  35        if (!skb_mac_header_was_set(skb)) {
  36                WARN_ONCE(1, "%s: skb invalid", __func__);
  37                return RX_HANDLER_PASS;
  38        }
  39
  40        port = hsr_port_get_rcu(skb->dev);
  41        if (!port)
  42                goto finish_pass;
  43        hsr = port->hsr;
  44
  45        if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
  46                /* Directly kill frames sent by ourselves */
  47                kfree_skb(skb);
  48                goto finish_consume;
  49        }
  50
  51        /* For HSR, only tagged frames are expected, but for PRP
  52         * there could be non tagged frames as well from Single
  53         * attached nodes (SANs).
  54         */
  55        protocol = eth_hdr(skb)->h_proto;
  56        if (hsr->proto_ops->invalid_dan_ingress_frame &&
  57            hsr->proto_ops->invalid_dan_ingress_frame(protocol))
  58                goto finish_pass;
  59
  60        skb_push(skb, ETH_HLEN);
  61
  62        if (skb_mac_header(skb) != skb->data) {
  63                WARN_ONCE(1, "%s:%d: Malformed frame at source port %s)\n",
  64                          __func__, __LINE__, port->dev->name);
  65                goto finish_consume;
  66        }
  67
  68        hsr_forward_skb(skb, port);
  69
  70finish_consume:
  71        return RX_HANDLER_CONSUMED;
  72
  73finish_pass:
  74        return RX_HANDLER_PASS;
  75}
  76
  77bool hsr_port_exists(const struct net_device *dev)
  78{
  79        return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
  80}
  81
  82static int hsr_check_dev_ok(struct net_device *dev,
  83                            struct netlink_ext_ack *extack)
  84{
  85        /* Don't allow HSR on non-ethernet like devices */
  86        if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
  87            dev->addr_len != ETH_ALEN) {
  88                NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
  89                return -EINVAL;
  90        }
  91
  92        /* Don't allow enslaving hsr devices */
  93        if (is_hsr_master(dev)) {
  94                NL_SET_ERR_MSG_MOD(extack,
  95                                   "Cannot create trees of HSR devices.");
  96                return -EINVAL;
  97        }
  98
  99        if (hsr_port_exists(dev)) {
 100                NL_SET_ERR_MSG_MOD(extack,
 101                                   "This device is already a HSR slave.");
 102                return -EINVAL;
 103        }
 104
 105        if (is_vlan_dev(dev)) {
 106                NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
 107                return -EINVAL;
 108        }
 109
 110        if (dev->priv_flags & IFF_DONT_BRIDGE) {
 111                NL_SET_ERR_MSG_MOD(extack,
 112                                   "This device does not support bridging.");
 113                return -EOPNOTSUPP;
 114        }
 115
 116        /* HSR over bonded devices has not been tested, but I'm not sure it
 117         * won't work...
 118         */
 119
 120        return 0;
 121}
 122
 123/* Setup device to be added to the HSR bridge. */
 124static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
 125                             struct hsr_port *port,
 126                             struct netlink_ext_ack *extack)
 127
 128{
 129        struct net_device *hsr_dev;
 130        struct hsr_port *master;
 131        int res;
 132
 133        res = dev_set_promiscuity(dev, 1);
 134        if (res)
 135                return res;
 136
 137        master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
 138        hsr_dev = master->dev;
 139
 140        res = netdev_upper_dev_link(dev, hsr_dev, extack);
 141        if (res)
 142                goto fail_upper_dev_link;
 143
 144        res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
 145        if (res)
 146                goto fail_rx_handler;
 147        dev_disable_lro(dev);
 148
 149        return 0;
 150
 151fail_rx_handler:
 152        netdev_upper_dev_unlink(dev, hsr_dev);
 153fail_upper_dev_link:
 154        dev_set_promiscuity(dev, -1);
 155        return res;
 156}
 157
 158int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
 159                 enum hsr_port_type type, struct netlink_ext_ack *extack)
 160{
 161        struct hsr_port *port, *master;
 162        int res;
 163
 164        if (type != HSR_PT_MASTER) {
 165                res = hsr_check_dev_ok(dev, extack);
 166                if (res)
 167                        return res;
 168        }
 169
 170        port = hsr_port_get_hsr(hsr, type);
 171        if (port)
 172                return -EBUSY;  /* This port already exists */
 173
 174        port = kzalloc(sizeof(*port), GFP_KERNEL);
 175        if (!port)
 176                return -ENOMEM;
 177
 178        port->hsr = hsr;
 179        port->dev = dev;
 180        port->type = type;
 181
 182        if (type != HSR_PT_MASTER) {
 183                res = hsr_portdev_setup(hsr, dev, port, extack);
 184                if (res)
 185                        goto fail_dev_setup;
 186        }
 187
 188        list_add_tail_rcu(&port->port_list, &hsr->ports);
 189        synchronize_rcu();
 190
 191        master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
 192        netdev_update_features(master->dev);
 193        dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
 194
 195        return 0;
 196
 197fail_dev_setup:
 198        kfree(port);
 199        return res;
 200}
 201
 202void hsr_del_port(struct hsr_port *port)
 203{
 204        struct hsr_priv *hsr;
 205        struct hsr_port *master;
 206
 207        hsr = port->hsr;
 208        master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
 209        list_del_rcu(&port->port_list);
 210
 211        if (port != master) {
 212                netdev_update_features(master->dev);
 213                dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
 214                netdev_rx_handler_unregister(port->dev);
 215                dev_set_promiscuity(port->dev, -1);
 216                netdev_upper_dev_unlink(port->dev, master->dev);
 217        }
 218
 219        synchronize_rcu();
 220
 221        kfree(port);
 222}
 223