/*
 *  linux/arch/arm/mach-mmp/pxa168.c
 *
 *  Code specific to PXA168
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk/mmp.h>
#include <linux/platform_device.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/dma-mapping.h>

#include <asm/mach/time.h>
#include <asm/system_misc.h>

#include "addr-map.h"
#include "clock.h"
#include "common.h"
#include "cputype.h"
#include "devices.h"
#include "irqs.h"
#include "mfp.h"
#include "pxa168.h"
#include "regs-apbc.h"
#include "regs-apmu.h"
#include "regs-usb.h"

#define MFPR_VIRT_BASE  (APB_VIRT_BASE + 0x1e000)

static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
{
        MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
        MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
        MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
        MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),

        MFP_ADDR_END,
};

void __init pxa168_init_irq(void)
{
        icu_init_irq();
}

static int __init pxa168_init(void)
{
        if (cpu_is_pxa168()) {
                mfp_init_base(MFPR_VIRT_BASE);
                mfp_init_addr(pxa168_mfp_addr_map);
                pxa168_clk_init(APB_PHYS_BASE + 0x50000,
                                AXI_PHYS_BASE + 0x82800,
                                APB_PHYS_BASE + 0x15000);
        }

        return 0;
}
postcore_initcall(pxa168_init);

/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST   (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
#define APBC_TIMERS     APBC_REG(0x34)

void __init pxa168_timer_init(void)
{
        /* this is early, we have to initialize the CCU registers by
         * ourselves instead of using clk_* API. Clock rate is defined
         * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
         */
        __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);

        /* 3.25MHz, bus/functional clock enabled, release reset */
        __raw_writel(TIMER_CLK_RST, APBC_TIMERS);

        timer_init(IRQ_PXA168_TIMER1);
}

void pxa168_clear_keypad_wakeup(void)
{
        uint32_t val;
        uint32_t mask = APMU_PXA168_KP_WAKE_CLR;

        /* wake event clear is needed in order to clear keypad interrupt */
        val = __raw_readl(APMU_WAKE_CLR);
        __raw_writel(val |  mask, APMU_WAKE_CLR);
}

/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);

struct resource pxa168_resource_gpio[] = {
        {
                .start  = 0xd4019000,
                .end    = 0xd4019fff,
                .flags  = IORESOURCE_MEM,
        }, {
                .start  = IRQ_PXA168_GPIOX,
                .end    = IRQ_PXA168_GPIOX,
                .name   = "gpio_mux",
                .flags  = IORESOURCE_IRQ,
        },
};

struct platform_device pxa168_device_gpio = {
        .name           = "mmp-gpio",
        .id             = -1,
        .num_resources  = ARRAY_SIZE(pxa168_resource_gpio),
        .resource       = pxa168_resource_gpio,
};

struct resource pxa168_usb_host_resources[] = {
        /* USB Host conroller register base */
        [0] = {
                .start  = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
                .end    = PXA168_U2H_REGBASE + USB_REG_RANGE,
                .flags  = IORESOURCE_MEM,
                .name   = "capregs",
        },
        /* USB PHY register base */
        [1] = {
                .start  = PXA168_U2H_PHYBASE,
                .end    = PXA168_U2H_PHYBASE + USB_PHY_RANGE,
                .flags  = IORESOURCE_MEM,
                .name   = "phyregs",
        },
        [2] = {
                .start  = IRQ_PXA168_USB2,
                .end    = IRQ_PXA168_USB2,
                .flags  = IORESOURCE_IRQ,
        },
};

static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
struct platform_device pxa168_device_usb_host = {
        .name = "pxa-sph",
        .id   = -1,
        .dev  = {
                .dma_mask = &pxa168_usb_host_dmamask,
                .coherent_dma_mask = DMA_BIT_MASK(32),
        },

        .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
        .resource      = pxa168_usb_host_resources,
};

int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
{
        pxa168_device_usb_host.dev.platform_data = pdata;
        return platform_device_register(&pxa168_device_usb_host);
}

void pxa168_restart(enum reboot_mode mode, const char *cmd)
{
        soft_restart(0xffff0000);
}