1
2
3
4
5
6
7
8
9
10
11#include <linux/init.h>
12#include <linux/kernel.h>
13#include <linux/platform_device.h>
14#include <linux/mtd/mtd.h>
15#include <linux/mtd/partitions.h>
16#include <linux/mtd/onenand.h>
17#include <linux/interrupt.h>
18#include <linux/platform_data/pca953x.h>
19#include <linux/gpio.h>
20#include <linux/gpio-pxa.h>
21#include <linux/mfd/88pm860x.h>
22#include <linux/platform_data/mv_usb.h>
23#include <linux/spi/spi.h>
24#include <linux/delay.h>
25
26#include <asm/mach-types.h>
27#include <asm/mach/arch.h>
28#include <asm/mach/flash.h>
29#include "addr-map.h"
30#include "mfp-pxa910.h"
31#include "pxa910.h"
32#include "irqs.h"
33#include "regs-usb.h"
34
35#include "common.h"
36
37#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
38 ((x < 16) ? x : 15)))
39#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
40 ((x < 16) ? x : 15)))
41
42
43
44
45
46
47#define TTCDKB_NR_IRQS (MMP_NR_IRQS + 16 + 16 + 24)
48
49static unsigned long ttc_dkb_pin_config[] __initdata = {
50
51 GPIO47_UART2_RXD,
52 GPIO48_UART2_TXD,
53
54
55 DF_IO0_ND_IO0,
56 DF_IO1_ND_IO1,
57 DF_IO2_ND_IO2,
58 DF_IO3_ND_IO3,
59 DF_IO4_ND_IO4,
60 DF_IO5_ND_IO5,
61 DF_IO6_ND_IO6,
62 DF_IO7_ND_IO7,
63 DF_IO8_ND_IO8,
64 DF_IO9_ND_IO9,
65 DF_IO10_ND_IO10,
66 DF_IO11_ND_IO11,
67 DF_IO12_ND_IO12,
68 DF_IO13_ND_IO13,
69 DF_IO14_ND_IO14,
70 DF_IO15_ND_IO15,
71 DF_nCS0_SM_nCS2_nCS0,
72 DF_ALE_SM_WEn_ND_ALE,
73 DF_CLE_SM_OEn_ND_CLE,
74 DF_WEn_DF_WEn,
75 DF_REn_DF_REn,
76 DF_RDY0_DF_RDY0,
77};
78
79static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
80 .irq_base = MMP_GPIO_TO_IRQ(0),
81};
82
83static struct mtd_partition ttc_dkb_onenand_partitions[] = {
84 {
85 .name = "bootloader",
86 .offset = 0,
87 .size = SZ_1M,
88 .mask_flags = MTD_WRITEABLE,
89 }, {
90 .name = "reserved",
91 .offset = MTDPART_OFS_APPEND,
92 .size = SZ_128K,
93 .mask_flags = MTD_WRITEABLE,
94 }, {
95 .name = "reserved",
96 .offset = MTDPART_OFS_APPEND,
97 .size = SZ_8M,
98 .mask_flags = MTD_WRITEABLE,
99 }, {
100 .name = "kernel",
101 .offset = MTDPART_OFS_APPEND,
102 .size = (SZ_2M + SZ_1M),
103 .mask_flags = 0,
104 }, {
105 .name = "filesystem",
106 .offset = MTDPART_OFS_APPEND,
107 .size = SZ_32M + SZ_16M,
108 .mask_flags = 0,
109 }
110};
111
112static struct onenand_platform_data ttc_dkb_onenand_info = {
113 .parts = ttc_dkb_onenand_partitions,
114 .nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
115};
116
117static struct resource ttc_dkb_resource_onenand[] = {
118 [0] = {
119 .start = SMC_CS0_PHYS_BASE,
120 .end = SMC_CS0_PHYS_BASE + SZ_1M,
121 .flags = IORESOURCE_MEM,
122 },
123};
124
125static struct platform_device ttc_dkb_device_onenand = {
126 .name = "onenand-flash",
127 .id = -1,
128 .resource = ttc_dkb_resource_onenand,
129 .num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
130 .dev = {
131 .platform_data = &ttc_dkb_onenand_info,
132 },
133};
134
135static struct platform_device *ttc_dkb_devices[] = {
136 &pxa910_device_gpio,
137 &pxa910_device_rtc,
138 &ttc_dkb_device_onenand,
139};
140
141static struct pca953x_platform_data max7312_data[] = {
142 {
143 .gpio_base = TTCDKB_GPIO_EXT0(0),
144 .irq_base = MMP_NR_IRQS,
145 },
146};
147
148static struct pm860x_platform_data ttc_dkb_pm8607_info = {
149 .irq_base = IRQ_BOARD_START,
150};
151
152static struct i2c_board_info ttc_dkb_i2c_info[] = {
153 {
154 .type = "88PM860x",
155 .addr = 0x34,
156 .platform_data = &ttc_dkb_pm8607_info,
157 .irq = IRQ_PXA910_PMIC_INT,
158 },
159 {
160 .type = "max7312",
161 .addr = 0x23,
162 .irq = MMP_GPIO_TO_IRQ(80),
163 .platform_data = &max7312_data,
164 },
165};
166
167#if IS_ENABLED(CONFIG_USB_SUPPORT)
168#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
169
170static struct mv_usb_platform_data ttc_usb_pdata = {
171 .vbus = NULL,
172 .mode = MV_USB_MODE_OTG,
173 .otg_force_a_bus_req = 1,
174 .phy_init = pxa_usb_phy_init,
175 .phy_deinit = pxa_usb_phy_deinit,
176 .set_vbus = NULL,
177};
178#endif
179#endif
180
181#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
182static struct pxa3xx_nand_platform_data dkb_nand_info = {
183 .enable_arbiter = 1,
184 .num_cs = 1,
185};
186#endif
187
188#if IS_ENABLED(CONFIG_MMP_DISP)
189
190#define CFG_IOPADMODE(iopad) (iopad)
191#define SCLK_SOURCE_SELECT(x) (x << 30)
192
193#define CFG_DUMBMODE(mode) (mode << 28)
194static struct mmp_mach_path_config dkb_disp_config[] = {
195 [0] = {
196 .name = "mmp-parallel",
197 .overlay_num = 2,
198 .output_type = PATH_OUT_PARALLEL,
199 .path_config = CFG_IOPADMODE(0x1)
200 | SCLK_SOURCE_SELECT(0x1),
201 .link_config = CFG_DUMBMODE(0x2),
202 },
203};
204
205static struct mmp_mach_plat_info dkb_disp_info = {
206 .name = "mmp-disp",
207 .clk_name = "disp0",
208 .path_num = 1,
209 .paths = dkb_disp_config,
210};
211
212static struct mmp_buffer_driver_mach_info dkb_fb_info = {
213 .name = "mmp-fb",
214 .path_name = "mmp-parallel",
215 .overlay_id = 0,
216 .dmafetch_id = 1,
217 .default_pixfmt = PIXFMT_RGB565,
218};
219
220static void dkb_tpo_panel_power(int on)
221{
222 int err;
223 u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
224
225 if (on) {
226 err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
227 if (err) {
228 pr_err("failed to request GPIO for TPO LCD RESET\n");
229 return;
230 }
231 gpio_direction_output(spi_reset, 0);
232 udelay(100);
233 gpio_set_value(spi_reset, 1);
234 gpio_free(spi_reset);
235 } else {
236 err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
237 if (err) {
238 pr_err("failed to request LCD RESET gpio\n");
239 return;
240 }
241 gpio_set_value(spi_reset, 0);
242 gpio_free(spi_reset);
243 }
244}
245
246static struct mmp_mach_panel_info dkb_tpo_panel_info = {
247 .name = "tpo-hvga",
248 .plat_path_name = "mmp-parallel",
249 .plat_set_onoff = dkb_tpo_panel_power,
250};
251
252static struct spi_board_info spi_board_info[] __initdata = {
253 {
254 .modalias = "tpo-hvga",
255 .platform_data = &dkb_tpo_panel_info,
256 .bus_num = 5,
257 }
258};
259
260static void __init add_disp(void)
261{
262 pxa_register_device(&pxa910_device_disp,
263 &dkb_disp_info, sizeof(dkb_disp_info));
264 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
265 pxa_register_device(&pxa910_device_fb,
266 &dkb_fb_info, sizeof(dkb_fb_info));
267 pxa_register_device(&pxa910_device_panel,
268 &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
269}
270#endif
271
272static void __init ttc_dkb_init(void)
273{
274 mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
275
276
277 pxa910_add_uart(1);
278#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
279 pxa910_add_nand(&dkb_nand_info);
280#endif
281
282
283 pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
284 platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
285 sizeof(struct pxa_gpio_platform_data));
286 platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
287
288#if IS_ENABLED(CONFIG_USB_MV_UDC)
289 pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
290 platform_device_register(&pxa168_device_u2o);
291#endif
292
293#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
294 pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
295 platform_device_register(&pxa168_device_u2oehci);
296#endif
297
298#if IS_ENABLED(CONFIG_USB_MV_OTG)
299 pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
300 platform_device_register(&pxa168_device_u2ootg);
301#endif
302
303#if IS_ENABLED(CONFIG_MMP_DISP)
304 add_disp();
305#endif
306}
307
308MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
309 .map_io = mmp_map_io,
310 .nr_irqs = TTCDKB_NR_IRQS,
311 .init_irq = pxa910_init_irq,
312 .init_time = pxa910_timer_init,
313 .init_machine = ttc_dkb_init,
314 .restart = mmp_restart,
315MACHINE_END
316
