linux/arch/arm/mach-omap1/lcd_dma.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-omap1/lcd_dma.c
   3 *
   4 * Extracted from arch/arm/plat-omap/dma.c
   5 * Copyright (C) 2003 - 2008 Nokia Corporation
   6 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   7 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   8 * Graphics DMA and LCD DMA graphics tranformations
   9 * by Imre Deak <imre.deak@nokia.com>
  10 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  11 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  12 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  13 *
  14 * Copyright (C) 2009 Texas Instruments
  15 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  16 *
  17 * Support functions for the OMAP internal DMA channels.
  18 *
  19 * This program is free software; you can redistribute it and/or modify
  20 * it under the terms of the GNU General Public License version 2 as
  21 * published by the Free Software Foundation.
  22 *
  23 */
  24
  25#include <linux/module.h>
  26#include <linux/spinlock.h>
  27#include <linux/interrupt.h>
  28#include <linux/io.h>
  29
  30#include <linux/omap-dma.h>
  31
  32#include <mach/hardware.h>
  33#include <mach/lcdc.h>
  34
  35int omap_lcd_dma_running(void)
  36{
  37        /*
  38         * On OMAP1510, internal LCD controller will start the transfer
  39         * when it gets enabled, so assume DMA running if LCD enabled.
  40         */
  41        if (cpu_is_omap15xx())
  42                if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
  43                        return 1;
  44
  45        /* Check if LCD DMA is running */
  46        if (cpu_is_omap16xx())
  47                if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
  48                        return 1;
  49
  50        return 0;
  51}
  52
  53static struct lcd_dma_info {
  54        spinlock_t lock;
  55        int reserved;
  56        void (*callback)(u16 status, void *data);
  57        void *cb_data;
  58
  59        int active;
  60        unsigned long addr;
  61        int rotate, data_type, xres, yres;
  62        int vxres;
  63        int mirror;
  64        int xscale, yscale;
  65        int ext_ctrl;
  66        int src_port;
  67        int single_transfer;
  68} lcd_dma;
  69
  70void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
  71                         int data_type)
  72{
  73        lcd_dma.addr = addr;
  74        lcd_dma.data_type = data_type;
  75        lcd_dma.xres = fb_xres;
  76        lcd_dma.yres = fb_yres;
  77}
  78EXPORT_SYMBOL(omap_set_lcd_dma_b1);
  79
  80void omap_set_lcd_dma_ext_controller(int external)
  81{
  82        lcd_dma.ext_ctrl = external;
  83}
  84EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
  85
  86void omap_set_lcd_dma_single_transfer(int single)
  87{
  88        lcd_dma.single_transfer = single;
  89}
  90EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
  91
  92void omap_set_lcd_dma_b1_rotation(int rotate)
  93{
  94        if (cpu_is_omap15xx()) {
  95                printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
  96                BUG();
  97                return;
  98        }
  99        lcd_dma.rotate = rotate;
 100}
 101EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 102
 103void omap_set_lcd_dma_b1_mirror(int mirror)
 104{
 105        if (cpu_is_omap15xx()) {
 106                printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 107                BUG();
 108        }
 109        lcd_dma.mirror = mirror;
 110}
 111EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 112
 113void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 114{
 115        if (cpu_is_omap15xx()) {
 116                pr_err("DMA virtual resolution is not supported in 1510 mode\n");
 117                BUG();
 118        }
 119        lcd_dma.vxres = vxres;
 120}
 121EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 122
 123void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 124{
 125        if (cpu_is_omap15xx()) {
 126                printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 127                BUG();
 128        }
 129        lcd_dma.xscale = xscale;
 130        lcd_dma.yscale = yscale;
 131}
 132EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
 133
 134static void set_b1_regs(void)
 135{
 136        unsigned long top, bottom;
 137        int es;
 138        u16 w;
 139        unsigned long en, fn;
 140        long ei, fi;
 141        unsigned long vxres;
 142        unsigned int xscale, yscale;
 143
 144        switch (lcd_dma.data_type) {
 145        case OMAP_DMA_DATA_TYPE_S8:
 146                es = 1;
 147                break;
 148        case OMAP_DMA_DATA_TYPE_S16:
 149                es = 2;
 150                break;
 151        case OMAP_DMA_DATA_TYPE_S32:
 152                es = 4;
 153                break;
 154        default:
 155                BUG();
 156                return;
 157        }
 158
 159        vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
 160        xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
 161        yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
 162        BUG_ON(vxres < lcd_dma.xres);
 163
 164#define PIXADDR(x, y) (lcd_dma.addr +                                   \
 165                ((y) * vxres * yscale + (x) * xscale) * es)
 166#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
 167
 168        switch (lcd_dma.rotate) {
 169        case 0:
 170                if (!lcd_dma.mirror) {
 171                        top = PIXADDR(0, 0);
 172                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 173                        /* 1510 DMA requires the bottom address to be 2 more
 174                         * than the actual last memory access location. */
 175                        if (cpu_is_omap15xx() &&
 176                                lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 177                                        bottom += 2;
 178                        ei = PIXSTEP(0, 0, 1, 0);
 179                        fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
 180                } else {
 181                        top = PIXADDR(lcd_dma.xres - 1, 0);
 182                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 183                        ei = PIXSTEP(1, 0, 0, 0);
 184                        fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
 185                }
 186                en = lcd_dma.xres;
 187                fn = lcd_dma.yres;
 188                break;
 189        case 90:
 190                if (!lcd_dma.mirror) {
 191                        top = PIXADDR(0, lcd_dma.yres - 1);
 192                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 193                        ei = PIXSTEP(0, 1, 0, 0);
 194                        fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
 195                } else {
 196                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 197                        bottom = PIXADDR(0, 0);
 198                        ei = PIXSTEP(0, 1, 0, 0);
 199                        fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
 200                }
 201                en = lcd_dma.yres;
 202                fn = lcd_dma.xres;
 203                break;
 204        case 180:
 205                if (!lcd_dma.mirror) {
 206                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 207                        bottom = PIXADDR(0, 0);
 208                        ei = PIXSTEP(1, 0, 0, 0);
 209                        fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
 210                } else {
 211                        top = PIXADDR(0, lcd_dma.yres - 1);
 212                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 213                        ei = PIXSTEP(0, 0, 1, 0);
 214                        fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
 215                }
 216                en = lcd_dma.xres;
 217                fn = lcd_dma.yres;
 218                break;
 219        case 270:
 220                if (!lcd_dma.mirror) {
 221                        top = PIXADDR(lcd_dma.xres - 1, 0);
 222                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 223                        ei = PIXSTEP(0, 0, 0, 1);
 224                        fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
 225                } else {
 226                        top = PIXADDR(0, 0);
 227                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 228                        ei = PIXSTEP(0, 0, 0, 1);
 229                        fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
 230                }
 231                en = lcd_dma.yres;
 232                fn = lcd_dma.xres;
 233                break;
 234        default:
 235                BUG();
 236                return; /* Suppress warning about uninitialized vars */
 237        }
 238
 239        if (cpu_is_omap15xx()) {
 240                omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 241                omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 242                omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
 243                omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
 244
 245                return;
 246        }
 247
 248        /* 1610 regs */
 249        omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
 250        omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
 251        omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
 252        omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
 253
 254        omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
 255        omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
 256
 257        w = omap_readw(OMAP1610_DMA_LCD_CSDP);
 258        w &= ~0x03;
 259        w |= lcd_dma.data_type;
 260        omap_writew(w, OMAP1610_DMA_LCD_CSDP);
 261
 262        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 263        /* Always set the source port as SDRAM for now*/
 264        w &= ~(0x03 << 6);
 265        if (lcd_dma.callback != NULL)
 266                w |= 1 << 1;            /* Block interrupt enable */
 267        else
 268                w &= ~(1 << 1);
 269        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 270
 271        if (!(lcd_dma.rotate || lcd_dma.mirror ||
 272              lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
 273                return;
 274
 275        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 276        /* Set the double-indexed addressing mode */
 277        w |= (0x03 << 12);
 278        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 279
 280        omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
 281        omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
 282        omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
 283}
 284
 285static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
 286{
 287        u16 w;
 288
 289        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 290        if (unlikely(!(w & (1 << 3)))) {
 291                printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
 292                return IRQ_NONE;
 293        }
 294        /* Ack the IRQ */
 295        w |= (1 << 3);
 296        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 297        lcd_dma.active = 0;
 298        if (lcd_dma.callback != NULL)
 299                lcd_dma.callback(w, lcd_dma.cb_data);
 300
 301        return IRQ_HANDLED;
 302}
 303
 304int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
 305                         void *data)
 306{
 307        spin_lock_irq(&lcd_dma.lock);
 308        if (lcd_dma.reserved) {
 309                spin_unlock_irq(&lcd_dma.lock);
 310                printk(KERN_ERR "LCD DMA channel already reserved\n");
 311                BUG();
 312                return -EBUSY;
 313        }
 314        lcd_dma.reserved = 1;
 315        spin_unlock_irq(&lcd_dma.lock);
 316        lcd_dma.callback = callback;
 317        lcd_dma.cb_data = data;
 318        lcd_dma.active = 0;
 319        lcd_dma.single_transfer = 0;
 320        lcd_dma.rotate = 0;
 321        lcd_dma.vxres = 0;
 322        lcd_dma.mirror = 0;
 323        lcd_dma.xscale = 0;
 324        lcd_dma.yscale = 0;
 325        lcd_dma.ext_ctrl = 0;
 326        lcd_dma.src_port = 0;
 327
 328        return 0;
 329}
 330EXPORT_SYMBOL(omap_request_lcd_dma);
 331
 332void omap_free_lcd_dma(void)
 333{
 334        spin_lock(&lcd_dma.lock);
 335        if (!lcd_dma.reserved) {
 336                spin_unlock(&lcd_dma.lock);
 337                printk(KERN_ERR "LCD DMA is not reserved\n");
 338                BUG();
 339                return;
 340        }
 341        if (!cpu_is_omap15xx())
 342                omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 343                            OMAP1610_DMA_LCD_CCR);
 344        lcd_dma.reserved = 0;
 345        spin_unlock(&lcd_dma.lock);
 346}
 347EXPORT_SYMBOL(omap_free_lcd_dma);
 348
 349void omap_enable_lcd_dma(void)
 350{
 351        u16 w;
 352
 353        /*
 354         * Set the Enable bit only if an external controller is
 355         * connected. Otherwise the OMAP internal controller will
 356         * start the transfer when it gets enabled.
 357         */
 358        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 359                return;
 360
 361        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 362        w |= 1 << 8;
 363        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 364
 365        lcd_dma.active = 1;
 366
 367        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 368        w |= 1 << 7;
 369        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 370}
 371EXPORT_SYMBOL(omap_enable_lcd_dma);
 372
 373void omap_setup_lcd_dma(void)
 374{
 375        BUG_ON(lcd_dma.active);
 376        if (!cpu_is_omap15xx()) {
 377                /* Set some reasonable defaults */
 378                omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 379                omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 380                omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 381        }
 382        set_b1_regs();
 383        if (!cpu_is_omap15xx()) {
 384                u16 w;
 385
 386                w = omap_readw(OMAP1610_DMA_LCD_CCR);
 387                /*
 388                 * If DMA was already active set the end_prog bit to have
 389                 * the programmed register set loaded into the active
 390                 * register set.
 391                 */
 392                w |= 1 << 11;           /* End_prog */
 393                if (!lcd_dma.single_transfer)
 394                        w |= (3 << 8);  /* Auto_init, repeat */
 395                omap_writew(w, OMAP1610_DMA_LCD_CCR);
 396        }
 397}
 398EXPORT_SYMBOL(omap_setup_lcd_dma);
 399
 400void omap_stop_lcd_dma(void)
 401{
 402        u16 w;
 403
 404        lcd_dma.active = 0;
 405        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 406                return;
 407
 408        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 409        w &= ~(1 << 7);
 410        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 411
 412        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 413        w &= ~(1 << 8);
 414        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 415}
 416EXPORT_SYMBOL(omap_stop_lcd_dma);
 417
 418static int __init omap_init_lcd_dma(void)
 419{
 420        int r;
 421
 422        if (!cpu_class_is_omap1())
 423                return -ENODEV;
 424
 425        if (cpu_is_omap16xx()) {
 426                u16 w;
 427
 428                /* this would prevent OMAP sleep */
 429                w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 430                w &= ~(1 << 8);
 431                omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 432        }
 433
 434        spin_lock_init(&lcd_dma.lock);
 435
 436        r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
 437                        "LCD DMA", NULL);
 438        if (r != 0)
 439                pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
 440
 441        return r;
 442}
 443
 444arch_initcall(omap_init_lcd_dma);
 445
 446