1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/platform_device.h>
17#include <linux/delay.h>
18#include <linux/pwm.h>
19#include <linux/pwm_backlight.h>
20#include <linux/input.h>
21#include <linux/gpio.h>
22#include <linux/gpio_keys.h>
23#include <linux/leds-lp3944.h>
24#include <linux/i2c/pxa-i2c.h>
25
26#include <media/soc_camera.h>
27
28#include <asm/setup.h>
29#include <asm/mach-types.h>
30#include <asm/mach/arch.h>
31
32#include "pxa27x.h"
33#include <linux/platform_data/video-pxafb.h>
34#include <linux/platform_data/usb-ohci-pxa27x.h>
35#include <mach/hardware.h>
36#include <linux/platform_data/keypad-pxa27x.h>
37#include <linux/platform_data/media/camera-pxa.h>
38
39#include "devices.h"
40#include "generic.h"
41
42#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
43
44#define GPIO12_A780_FLIP_LID 12
45#define GPIO15_A1200_FLIP_LID 15
46#define GPIO15_A910_FLIP_LID 15
47#define GPIO12_E680_LOCK_SWITCH 12
48#define GPIO15_E6_LOCK_SWITCH 15
49#define GPIO50_nCAM_EN 50
50#define GPIO19_GEN1_CAM_RST 19
51#define GPIO28_GEN2_CAM_RST 28
52
53static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
54 PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
55 PWM_POLARITY_NORMAL),
56};
57
58static struct platform_pwm_backlight_data ezx_backlight_data = {
59 .max_brightness = 1023,
60 .dft_brightness = 1023,
61 .enable_gpio = -1,
62};
63
64static struct platform_device ezx_backlight_device = {
65 .name = "pwm-backlight",
66 .dev = {
67 .parent = &pxa27x_device_pwm0.dev,
68 .platform_data = &ezx_backlight_data,
69 },
70};
71
72static struct pxafb_mode_info mode_ezx_old = {
73 .pixclock = 150000,
74 .xres = 240,
75 .yres = 320,
76 .bpp = 16,
77 .hsync_len = 10,
78 .left_margin = 20,
79 .right_margin = 10,
80 .vsync_len = 2,
81 .upper_margin = 3,
82 .lower_margin = 2,
83 .sync = 0,
84};
85
86static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
87 .modes = &mode_ezx_old,
88 .num_modes = 1,
89 .lcd_conn = LCD_COLOR_TFT_16BPP,
90};
91
92static struct pxafb_mode_info mode_72r89803y01 = {
93 .pixclock = 192308,
94 .xres = 240,
95 .yres = 320,
96 .bpp = 32,
97 .depth = 18,
98 .hsync_len = 10,
99 .left_margin = 20,
100 .right_margin = 10,
101 .vsync_len = 2,
102 .upper_margin = 3,
103 .lower_margin = 2,
104 .sync = 0,
105};
106
107static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
108 .modes = &mode_72r89803y01,
109 .num_modes = 1,
110 .lcd_conn = LCD_COLOR_TFT_18BPP,
111};
112
113static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
114 &ezx_backlight_device,
115};
116
117static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
118
119 GPIO16_PWM0_OUT,
120
121
122 GPIO42_BTUART_RXD,
123 GPIO43_BTUART_TXD,
124 GPIO44_BTUART_CTS,
125 GPIO45_BTUART_RTS,
126
127
128 GPIO117_I2C_SCL,
129 GPIO118_I2C_SDA,
130
131
132 GPIO29_SSP1_SCLK,
133 GPIO25_SSP1_TXD,
134 GPIO26_SSP1_RXD,
135 GPIO24_GPIO,
136 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
137 GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,
138 GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,
139
140
141 GPIO32_MMC_CLK,
142 GPIO92_MMC_DAT_0,
143 GPIO109_MMC_DAT_1,
144 GPIO110_MMC_DAT_2,
145 GPIO111_MMC_DAT_3,
146 GPIO112_MMC_CMD,
147 GPIO11_GPIO,
148
149
150 GPIO34_USB_P2_2,
151 GPIO35_USB_P2_1,
152 GPIO36_USB_P2_4,
153 GPIO39_USB_P2_6,
154 GPIO40_USB_P2_5,
155 GPIO53_USB_P2_3,
156
157
158 GPIO30_USB_P3_2,
159 GPIO31_USB_P3_6,
160 GPIO90_USB_P3_5,
161 GPIO91_USB_P3_1,
162 GPIO56_USB_P3_4,
163 GPIO113_USB_P3_3,
164};
165
166#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
167static unsigned long gen1_pin_config[] __initdata = {
168
169 GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
170
171
172 GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,
173 GPIO48_GPIO,
174 GPIO28_GPIO,
175
176
177 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
178 GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,
179 GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,
180 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,
181 GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,
182 GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,
183
184
185 GPIO52_SSP3_SCLK,
186 GPIO83_SSP3_SFRM,
187 GPIO81_SSP3_TXD,
188 GPIO89_SSP3_RXD,
189
190
191 GPIO22_GPIO,
192 GPIO37_GPIO,
193 GPIO38_GPIO,
194 GPIO88_GPIO,
195
196
197 GPIO23_CIF_MCLK,
198 GPIO54_CIF_PCLK,
199 GPIO85_CIF_LV,
200 GPIO84_CIF_FV,
201 GPIO27_CIF_DD_0,
202 GPIO114_CIF_DD_1,
203 GPIO51_CIF_DD_2,
204 GPIO115_CIF_DD_3,
205 GPIO95_CIF_DD_4,
206 GPIO94_CIF_DD_5,
207 GPIO17_CIF_DD_6,
208 GPIO108_CIF_DD_7,
209 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
210 GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,
211
212
213 GPIO120_GPIO,
214 GPIO119_GPIO,
215 GPIO86_GPIO,
216 GPIO87_GPIO,
217};
218#endif
219
220#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
221 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
222static unsigned long gen2_pin_config[] __initdata = {
223
224 GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
225
226
227 GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
228
229
230 GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,
231 GPIO37_GPIO,
232 GPIO57_GPIO,
233
234
235 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
236 GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,
237 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,
238 GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,
239 GPIO41_GPIO,
240
241
242 GPIO52_SSP3_SCLK,
243 GPIO83_SSP3_SFRM,
244 GPIO81_SSP3_TXD,
245 GPIO82_SSP3_RXD,
246
247
248 GPIO22_GPIO,
249 GPIO14_GPIO,
250 GPIO38_GPIO,
251 GPIO88_GPIO,
252
253
254 GPIO23_CIF_MCLK,
255 GPIO54_CIF_PCLK,
256 GPIO85_CIF_LV,
257 GPIO84_CIF_FV,
258 GPIO27_CIF_DD_0,
259 GPIO114_CIF_DD_1,
260 GPIO51_CIF_DD_2,
261 GPIO115_CIF_DD_3,
262 GPIO95_CIF_DD_4,
263 GPIO48_CIF_DD_5,
264 GPIO93_CIF_DD_6,
265 GPIO12_CIF_DD_7,
266 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
267 GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,
268 GPIO17_GPIO,
269};
270#endif
271
272#ifdef CONFIG_MACH_EZX_A780
273static unsigned long a780_pin_config[] __initdata = {
274
275 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
277 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
278 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
279 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
280 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
281 GPIO103_KP_MKOUT_0,
282 GPIO104_KP_MKOUT_1,
283 GPIO105_KP_MKOUT_2,
284 GPIO106_KP_MKOUT_3,
285 GPIO107_KP_MKOUT_4,
286
287
288 GPIO96_GPIO,
289};
290#endif
291
292#ifdef CONFIG_MACH_EZX_E680
293static unsigned long e680_pin_config[] __initdata = {
294
295 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
296 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
297 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
298 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
299 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
300 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
301 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
302 GPIO103_KP_MKOUT_0,
303 GPIO104_KP_MKOUT_1,
304 GPIO105_KP_MKOUT_2,
305 GPIO106_KP_MKOUT_3,
306
307
308 GPIO79_GPIO,
309 GPIO80_GPIO,
310 GPIO78_GPIO,
311 GPIO33_GPIO,
312 GPIO15_GPIO,
313 GPIO49_GPIO,
314 GPIO18_GPIO,
315
316
317 GPIO46_GPIO,
318 GPIO47_GPIO,
319};
320#endif
321
322#ifdef CONFIG_MACH_EZX_A1200
323static unsigned long a1200_pin_config[] __initdata = {
324
325 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
326 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
327 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
328 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
329 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
330 GPIO103_KP_MKOUT_0,
331 GPIO104_KP_MKOUT_1,
332 GPIO105_KP_MKOUT_2,
333 GPIO106_KP_MKOUT_3,
334 GPIO107_KP_MKOUT_4,
335 GPIO108_KP_MKOUT_5,
336};
337#endif
338
339#ifdef CONFIG_MACH_EZX_A910
340static unsigned long a910_pin_config[] __initdata = {
341
342 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
343 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
344 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
345 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
346 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
347 GPIO103_KP_MKOUT_0,
348 GPIO104_KP_MKOUT_1,
349 GPIO105_KP_MKOUT_2,
350 GPIO106_KP_MKOUT_3,
351 GPIO107_KP_MKOUT_4,
352 GPIO108_KP_MKOUT_5,
353
354
355 GPIO89_GPIO,
356 GPIO33_GPIO,
357 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,
358
359
360 GPIO20_GPIO,
361};
362#endif
363
364#ifdef CONFIG_MACH_EZX_E2
365static unsigned long e2_pin_config[] __initdata = {
366
367 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
368 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
369 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
370 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
371 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
372 GPIO103_KP_MKOUT_0,
373 GPIO104_KP_MKOUT_1,
374 GPIO105_KP_MKOUT_2,
375 GPIO106_KP_MKOUT_3,
376 GPIO107_KP_MKOUT_4,
377 GPIO108_KP_MKOUT_5,
378};
379#endif
380
381#ifdef CONFIG_MACH_EZX_E6
382static unsigned long e6_pin_config[] __initdata = {
383
384 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
385 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
386 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
387 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
388 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
389 GPIO103_KP_MKOUT_0,
390 GPIO104_KP_MKOUT_1,
391 GPIO105_KP_MKOUT_2,
392 GPIO106_KP_MKOUT_3,
393 GPIO107_KP_MKOUT_4,
394 GPIO108_KP_MKOUT_5,
395};
396#endif
397
398
399#ifdef CONFIG_MACH_EZX_A780
400static const unsigned int a780_key_map[] = {
401 KEY(0, 0, KEY_SEND),
402 KEY(0, 1, KEY_BACK),
403 KEY(0, 2, KEY_END),
404 KEY(0, 3, KEY_PAGEUP),
405 KEY(0, 4, KEY_UP),
406
407 KEY(1, 0, KEY_NUMERIC_1),
408 KEY(1, 1, KEY_NUMERIC_2),
409 KEY(1, 2, KEY_NUMERIC_3),
410 KEY(1, 3, KEY_SELECT),
411 KEY(1, 4, KEY_KPENTER),
412
413 KEY(2, 0, KEY_NUMERIC_4),
414 KEY(2, 1, KEY_NUMERIC_5),
415 KEY(2, 2, KEY_NUMERIC_6),
416 KEY(2, 3, KEY_RECORD),
417 KEY(2, 4, KEY_LEFT),
418
419 KEY(3, 0, KEY_NUMERIC_7),
420 KEY(3, 1, KEY_NUMERIC_8),
421 KEY(3, 2, KEY_NUMERIC_9),
422 KEY(3, 3, KEY_HOME),
423 KEY(3, 4, KEY_RIGHT),
424
425 KEY(4, 0, KEY_NUMERIC_STAR),
426 KEY(4, 1, KEY_NUMERIC_0),
427 KEY(4, 2, KEY_NUMERIC_POUND),
428 KEY(4, 3, KEY_PAGEDOWN),
429 KEY(4, 4, KEY_DOWN),
430};
431
432static struct matrix_keymap_data a780_matrix_keymap_data = {
433 .keymap = a780_key_map,
434 .keymap_size = ARRAY_SIZE(a780_key_map),
435};
436
437static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
438 .matrix_key_rows = 5,
439 .matrix_key_cols = 5,
440 .matrix_keymap_data = &a780_matrix_keymap_data,
441
442 .direct_key_map = { KEY_CAMERA },
443 .direct_key_num = 1,
444
445 .debounce_interval = 30,
446};
447#endif
448
449#ifdef CONFIG_MACH_EZX_E680
450static const unsigned int e680_key_map[] = {
451 KEY(0, 0, KEY_UP),
452 KEY(0, 1, KEY_RIGHT),
453 KEY(0, 2, KEY_RESERVED),
454 KEY(0, 3, KEY_SEND),
455
456 KEY(1, 0, KEY_DOWN),
457 KEY(1, 1, KEY_LEFT),
458 KEY(1, 2, KEY_PAGEUP),
459 KEY(1, 3, KEY_PAGEDOWN),
460
461 KEY(2, 0, KEY_RESERVED),
462 KEY(2, 1, KEY_RESERVED),
463 KEY(2, 2, KEY_RESERVED),
464 KEY(2, 3, KEY_KPENTER),
465};
466
467static struct matrix_keymap_data e680_matrix_keymap_data = {
468 .keymap = e680_key_map,
469 .keymap_size = ARRAY_SIZE(e680_key_map),
470};
471
472static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
473 .matrix_key_rows = 3,
474 .matrix_key_cols = 4,
475 .matrix_keymap_data = &e680_matrix_keymap_data,
476
477 .direct_key_map = {
478 KEY_CAMERA,
479 KEY_RESERVED,
480 KEY_RESERVED,
481 KEY_F1,
482 KEY_CANCEL,
483 KEY_F2,
484 },
485 .direct_key_num = 6,
486
487 .debounce_interval = 30,
488};
489#endif
490
491#ifdef CONFIG_MACH_EZX_A1200
492static const unsigned int a1200_key_map[] = {
493 KEY(0, 0, KEY_RESERVED),
494 KEY(0, 1, KEY_RIGHT),
495 KEY(0, 2, KEY_PAGEDOWN),
496 KEY(0, 3, KEY_RESERVED),
497 KEY(0, 4, KEY_RESERVED),
498 KEY(0, 5, KEY_RESERVED),
499
500 KEY(1, 0, KEY_RESERVED),
501 KEY(1, 1, KEY_DOWN),
502 KEY(1, 2, KEY_CAMERA),
503 KEY(1, 3, KEY_RESERVED),
504 KEY(1, 4, KEY_RESERVED),
505 KEY(1, 5, KEY_RESERVED),
506
507 KEY(2, 0, KEY_RESERVED),
508 KEY(2, 1, KEY_KPENTER),
509 KEY(2, 2, KEY_RECORD),
510 KEY(2, 3, KEY_RESERVED),
511 KEY(2, 4, KEY_RESERVED),
512 KEY(2, 5, KEY_SELECT),
513
514 KEY(3, 0, KEY_RESERVED),
515 KEY(3, 1, KEY_UP),
516 KEY(3, 2, KEY_SEND),
517 KEY(3, 3, KEY_RESERVED),
518 KEY(3, 4, KEY_RESERVED),
519 KEY(3, 5, KEY_RESERVED),
520
521 KEY(4, 0, KEY_RESERVED),
522 KEY(4, 1, KEY_LEFT),
523 KEY(4, 2, KEY_PAGEUP),
524 KEY(4, 3, KEY_RESERVED),
525 KEY(4, 4, KEY_RESERVED),
526 KEY(4, 5, KEY_RESERVED),
527};
528
529static struct matrix_keymap_data a1200_matrix_keymap_data = {
530 .keymap = a1200_key_map,
531 .keymap_size = ARRAY_SIZE(a1200_key_map),
532};
533
534static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
535 .matrix_key_rows = 5,
536 .matrix_key_cols = 6,
537 .matrix_keymap_data = &a1200_matrix_keymap_data,
538
539 .debounce_interval = 30,
540};
541#endif
542
543#ifdef CONFIG_MACH_EZX_E6
544static const unsigned int e6_key_map[] = {
545 KEY(0, 0, KEY_RESERVED),
546 KEY(0, 1, KEY_RIGHT),
547 KEY(0, 2, KEY_PAGEDOWN),
548 KEY(0, 3, KEY_RESERVED),
549 KEY(0, 4, KEY_RESERVED),
550 KEY(0, 5, KEY_NEXTSONG),
551
552 KEY(1, 0, KEY_RESERVED),
553 KEY(1, 1, KEY_DOWN),
554 KEY(1, 2, KEY_PROG1),
555 KEY(1, 3, KEY_RESERVED),
556 KEY(1, 4, KEY_RESERVED),
557 KEY(1, 5, KEY_RESERVED),
558
559 KEY(2, 0, KEY_RESERVED),
560 KEY(2, 1, KEY_ENTER),
561 KEY(2, 2, KEY_CAMERA),
562 KEY(2, 3, KEY_RESERVED),
563 KEY(2, 4, KEY_RESERVED),
564 KEY(2, 5, KEY_WWW),
565
566 KEY(3, 0, KEY_RESERVED),
567 KEY(3, 1, KEY_UP),
568 KEY(3, 2, KEY_SEND),
569 KEY(3, 3, KEY_RESERVED),
570 KEY(3, 4, KEY_RESERVED),
571 KEY(3, 5, KEY_PLAYPAUSE),
572
573 KEY(4, 0, KEY_RESERVED),
574 KEY(4, 1, KEY_LEFT),
575 KEY(4, 2, KEY_PAGEUP),
576 KEY(4, 3, KEY_RESERVED),
577 KEY(4, 4, KEY_RESERVED),
578 KEY(4, 5, KEY_PREVIOUSSONG),
579};
580
581static struct matrix_keymap_data e6_keymap_data = {
582 .keymap = e6_key_map,
583 .keymap_size = ARRAY_SIZE(e6_key_map),
584};
585
586static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
587 .matrix_key_rows = 5,
588 .matrix_key_cols = 6,
589 .matrix_keymap_data = &e6_keymap_data,
590
591 .debounce_interval = 30,
592};
593#endif
594
595#ifdef CONFIG_MACH_EZX_A910
596static const unsigned int a910_key_map[] = {
597 KEY(0, 0, KEY_NUMERIC_6),
598 KEY(0, 1, KEY_RIGHT),
599 KEY(0, 2, KEY_PAGEDOWN),
600 KEY(0, 3, KEY_KPENTER),
601 KEY(0, 4, KEY_NUMERIC_5),
602 KEY(0, 5, KEY_CAMERA),
603
604 KEY(1, 0, KEY_NUMERIC_8),
605 KEY(1, 1, KEY_DOWN),
606 KEY(1, 2, KEY_RESERVED),
607 KEY(1, 3, KEY_F1),
608 KEY(1, 4, KEY_NUMERIC_STAR),
609 KEY(1, 5, KEY_RESERVED),
610
611 KEY(2, 0, KEY_NUMERIC_7),
612 KEY(2, 1, KEY_NUMERIC_9),
613 KEY(2, 2, KEY_RECORD),
614 KEY(2, 3, KEY_F2),
615 KEY(2, 4, KEY_BACK),
616 KEY(2, 5, KEY_SELECT),
617
618 KEY(3, 0, KEY_NUMERIC_2),
619 KEY(3, 1, KEY_UP),
620 KEY(3, 2, KEY_SEND),
621 KEY(3, 3, KEY_NUMERIC_0),
622 KEY(3, 4, KEY_NUMERIC_1),
623 KEY(3, 5, KEY_RECORD),
624
625 KEY(4, 0, KEY_NUMERIC_4),
626 KEY(4, 1, KEY_LEFT),
627 KEY(4, 2, KEY_PAGEUP),
628 KEY(4, 3, KEY_NUMERIC_POUND),
629 KEY(4, 4, KEY_NUMERIC_3),
630 KEY(4, 5, KEY_RESERVED),
631};
632
633static struct matrix_keymap_data a910_matrix_keymap_data = {
634 .keymap = a910_key_map,
635 .keymap_size = ARRAY_SIZE(a910_key_map),
636};
637
638static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
639 .matrix_key_rows = 5,
640 .matrix_key_cols = 6,
641 .matrix_keymap_data = &a910_matrix_keymap_data,
642
643 .debounce_interval = 30,
644};
645#endif
646
647#ifdef CONFIG_MACH_EZX_E2
648static const unsigned int e2_key_map[] = {
649 KEY(0, 0, KEY_NUMERIC_6),
650 KEY(0, 1, KEY_RIGHT),
651 KEY(0, 2, KEY_NUMERIC_9),
652 KEY(0, 3, KEY_NEXTSONG),
653 KEY(0, 4, KEY_NUMERIC_5),
654 KEY(0, 5, KEY_F1),
655
656 KEY(1, 0, KEY_NUMERIC_8),
657 KEY(1, 1, KEY_DOWN),
658 KEY(1, 2, KEY_RESERVED),
659 KEY(1, 3, KEY_PAGEUP),
660 KEY(1, 4, KEY_NUMERIC_STAR),
661 KEY(1, 5, KEY_F2),
662
663 KEY(2, 0, KEY_NUMERIC_7),
664 KEY(2, 1, KEY_KPENTER),
665 KEY(2, 2, KEY_RECORD),
666 KEY(2, 3, KEY_PAGEDOWN),
667 KEY(2, 4, KEY_BACK),
668 KEY(2, 5, KEY_NUMERIC_0),
669
670 KEY(3, 0, KEY_NUMERIC_2),
671 KEY(3, 1, KEY_UP),
672 KEY(3, 2, KEY_SEND),
673 KEY(3, 3, KEY_PLAYPAUSE),
674 KEY(3, 4, KEY_NUMERIC_1),
675 KEY(3, 5, KEY_SOUND),
676
677 KEY(4, 0, KEY_NUMERIC_4),
678 KEY(4, 1, KEY_LEFT),
679 KEY(4, 2, KEY_NUMERIC_POUND),
680 KEY(4, 3, KEY_PREVIOUSSONG),
681 KEY(4, 4, KEY_NUMERIC_3),
682 KEY(4, 5, KEY_RESERVED),
683};
684
685static struct matrix_keymap_data e2_matrix_keymap_data = {
686 .keymap = e2_key_map,
687 .keymap_size = ARRAY_SIZE(e2_key_map),
688};
689
690static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
691 .matrix_key_rows = 5,
692 .matrix_key_cols = 6,
693 .matrix_keymap_data = &e2_matrix_keymap_data,
694
695 .debounce_interval = 30,
696};
697#endif
698
699#ifdef CONFIG_MACH_EZX_A780
700
701static struct gpio_keys_button a780_buttons[] = {
702 [0] = {
703 .code = SW_LID,
704 .gpio = GPIO12_A780_FLIP_LID,
705 .active_low = 0,
706 .desc = "A780 flip lid",
707 .type = EV_SW,
708 .wakeup = 1,
709 },
710};
711
712static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
713 .buttons = a780_buttons,
714 .nbuttons = ARRAY_SIZE(a780_buttons),
715};
716
717static struct platform_device a780_gpio_keys = {
718 .name = "gpio-keys",
719 .id = -1,
720 .dev = {
721 .platform_data = &a780_gpio_keys_platform_data,
722 },
723};
724
725
726static int a780_camera_init(void)
727{
728 int err;
729
730
731
732
733
734 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
735 if (err) {
736 pr_err("%s: Failed to request nCAM_EN\n", __func__);
737 goto fail;
738 }
739
740 err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
741 if (err) {
742 pr_err("%s: Failed to request CAM_RST\n", __func__);
743 goto fail_gpio_cam_rst;
744 }
745
746 gpio_direction_output(GPIO50_nCAM_EN, 1);
747 gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
748
749 return 0;
750
751fail_gpio_cam_rst:
752 gpio_free(GPIO50_nCAM_EN);
753fail:
754 return err;
755}
756
757static int a780_camera_power(struct device *dev, int on)
758{
759 gpio_set_value(GPIO50_nCAM_EN, !on);
760 return 0;
761}
762
763static int a780_camera_reset(struct device *dev)
764{
765 gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
766 msleep(10);
767 gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
768
769 return 0;
770}
771
772struct pxacamera_platform_data a780_pxacamera_platform_data = {
773 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
774 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
775 .mclk_10khz = 5000,
776};
777
778static struct i2c_board_info a780_camera_i2c_board_info = {
779 I2C_BOARD_INFO("mt9m111", 0x5d),
780};
781
782static struct soc_camera_link a780_iclink = {
783 .bus_id = 0,
784 .flags = SOCAM_SENSOR_INVERT_PCLK,
785 .i2c_adapter_id = 0,
786 .board_info = &a780_camera_i2c_board_info,
787 .power = a780_camera_power,
788 .reset = a780_camera_reset,
789};
790
791static struct platform_device a780_camera = {
792 .name = "soc-camera-pdrv",
793 .id = 0,
794 .dev = {
795 .platform_data = &a780_iclink,
796 },
797};
798
799static struct platform_device *a780_devices[] __initdata = {
800 &a780_gpio_keys,
801};
802
803static void __init a780_init(void)
804{
805 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
806 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
807 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
808
809 pxa_set_ffuart_info(NULL);
810 pxa_set_btuart_info(NULL);
811 pxa_set_stuart_info(NULL);
812
813 pxa_set_i2c_info(NULL);
814
815 pxa_set_fb_info(NULL, &ezx_fb_info_1);
816
817 pxa_set_keypad_info(&a780_keypad_platform_data);
818
819 if (a780_camera_init() == 0) {
820 pxa_set_camera_info(&a780_pxacamera_platform_data);
821 platform_device_register(&a780_camera);
822 }
823
824 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
825 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
826 platform_add_devices(ARRAY_AND_SIZE(a780_devices));
827}
828
829MACHINE_START(EZX_A780, "Motorola EZX A780")
830 .atag_offset = 0x100,
831 .map_io = pxa27x_map_io,
832 .nr_irqs = EZX_NR_IRQS,
833 .init_irq = pxa27x_init_irq,
834 .handle_irq = pxa27x_handle_irq,
835 .init_time = pxa_timer_init,
836 .init_machine = a780_init,
837 .restart = pxa_restart,
838MACHINE_END
839#endif
840
841#ifdef CONFIG_MACH_EZX_E680
842
843static struct gpio_keys_button e680_buttons[] = {
844 [0] = {
845 .code = KEY_SCREENLOCK,
846 .gpio = GPIO12_E680_LOCK_SWITCH,
847 .active_low = 0,
848 .desc = "E680 lock switch",
849 .type = EV_KEY,
850 .wakeup = 1,
851 },
852};
853
854static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
855 .buttons = e680_buttons,
856 .nbuttons = ARRAY_SIZE(e680_buttons),
857};
858
859static struct platform_device e680_gpio_keys = {
860 .name = "gpio-keys",
861 .id = -1,
862 .dev = {
863 .platform_data = &e680_gpio_keys_platform_data,
864 },
865};
866
867static struct i2c_board_info __initdata e680_i2c_board_info[] = {
868 { I2C_BOARD_INFO("tea5767", 0x81) },
869};
870
871static struct platform_device *e680_devices[] __initdata = {
872 &e680_gpio_keys,
873};
874
875static void __init e680_init(void)
876{
877 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
878 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
879 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
880
881 pxa_set_ffuart_info(NULL);
882 pxa_set_btuart_info(NULL);
883 pxa_set_stuart_info(NULL);
884
885 pxa_set_i2c_info(NULL);
886 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
887
888 pxa_set_fb_info(NULL, &ezx_fb_info_1);
889
890 pxa_set_keypad_info(&e680_keypad_platform_data);
891
892 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
893 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
894 platform_add_devices(ARRAY_AND_SIZE(e680_devices));
895}
896
897MACHINE_START(EZX_E680, "Motorola EZX E680")
898 .atag_offset = 0x100,
899 .map_io = pxa27x_map_io,
900 .nr_irqs = EZX_NR_IRQS,
901 .init_irq = pxa27x_init_irq,
902 .handle_irq = pxa27x_handle_irq,
903 .init_time = pxa_timer_init,
904 .init_machine = e680_init,
905 .restart = pxa_restart,
906MACHINE_END
907#endif
908
909#ifdef CONFIG_MACH_EZX_A1200
910
911static struct gpio_keys_button a1200_buttons[] = {
912 [0] = {
913 .code = SW_LID,
914 .gpio = GPIO15_A1200_FLIP_LID,
915 .active_low = 0,
916 .desc = "A1200 flip lid",
917 .type = EV_SW,
918 .wakeup = 1,
919 },
920};
921
922static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
923 .buttons = a1200_buttons,
924 .nbuttons = ARRAY_SIZE(a1200_buttons),
925};
926
927static struct platform_device a1200_gpio_keys = {
928 .name = "gpio-keys",
929 .id = -1,
930 .dev = {
931 .platform_data = &a1200_gpio_keys_platform_data,
932 },
933};
934
935static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
936 { I2C_BOARD_INFO("tea5767", 0x81) },
937};
938
939static struct platform_device *a1200_devices[] __initdata = {
940 &a1200_gpio_keys,
941};
942
943static void __init a1200_init(void)
944{
945 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
946 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
947 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
948
949 pxa_set_ffuart_info(NULL);
950 pxa_set_btuart_info(NULL);
951 pxa_set_stuart_info(NULL);
952
953 pxa_set_i2c_info(NULL);
954 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
955
956 pxa_set_fb_info(NULL, &ezx_fb_info_2);
957
958 pxa_set_keypad_info(&a1200_keypad_platform_data);
959
960 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
961 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
962 platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
963}
964
965MACHINE_START(EZX_A1200, "Motorola EZX A1200")
966 .atag_offset = 0x100,
967 .map_io = pxa27x_map_io,
968 .nr_irqs = EZX_NR_IRQS,
969 .init_irq = pxa27x_init_irq,
970 .handle_irq = pxa27x_handle_irq,
971 .init_time = pxa_timer_init,
972 .init_machine = a1200_init,
973 .restart = pxa_restart,
974MACHINE_END
975#endif
976
977#ifdef CONFIG_MACH_EZX_A910
978
979static struct gpio_keys_button a910_buttons[] = {
980 [0] = {
981 .code = SW_LID,
982 .gpio = GPIO15_A910_FLIP_LID,
983 .active_low = 0,
984 .desc = "A910 flip lid",
985 .type = EV_SW,
986 .wakeup = 1,
987 },
988};
989
990static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
991 .buttons = a910_buttons,
992 .nbuttons = ARRAY_SIZE(a910_buttons),
993};
994
995static struct platform_device a910_gpio_keys = {
996 .name = "gpio-keys",
997 .id = -1,
998 .dev = {
999 .platform_data = &a910_gpio_keys_platform_data,
1000 },
1001};
1002
1003
1004static int a910_camera_init(void)
1005{
1006 int err;
1007
1008
1009
1010
1011
1012 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
1013 if (err) {
1014 pr_err("%s: Failed to request nCAM_EN\n", __func__);
1015 goto fail;
1016 }
1017
1018 err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
1019 if (err) {
1020 pr_err("%s: Failed to request CAM_RST\n", __func__);
1021 goto fail_gpio_cam_rst;
1022 }
1023
1024 gpio_direction_output(GPIO50_nCAM_EN, 1);
1025 gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
1026
1027 return 0;
1028
1029fail_gpio_cam_rst:
1030 gpio_free(GPIO50_nCAM_EN);
1031fail:
1032 return err;
1033}
1034
1035static int a910_camera_power(struct device *dev, int on)
1036{
1037 gpio_set_value(GPIO50_nCAM_EN, !on);
1038 return 0;
1039}
1040
1041static int a910_camera_reset(struct device *dev)
1042{
1043 gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
1044 msleep(10);
1045 gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
1046
1047 return 0;
1048}
1049
1050struct pxacamera_platform_data a910_pxacamera_platform_data = {
1051 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
1052 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
1053 .mclk_10khz = 5000,
1054};
1055
1056static struct i2c_board_info a910_camera_i2c_board_info = {
1057 I2C_BOARD_INFO("mt9m111", 0x5d),
1058};
1059
1060static struct soc_camera_link a910_iclink = {
1061 .bus_id = 0,
1062 .i2c_adapter_id = 0,
1063 .board_info = &a910_camera_i2c_board_info,
1064 .power = a910_camera_power,
1065 .reset = a910_camera_reset,
1066};
1067
1068static struct platform_device a910_camera = {
1069 .name = "soc-camera-pdrv",
1070 .id = 0,
1071 .dev = {
1072 .platform_data = &a910_iclink,
1073 },
1074};
1075
1076
1077static struct lp3944_platform_data a910_lp3944_leds = {
1078 .leds_size = LP3944_LEDS_MAX,
1079 .leds = {
1080 [0] = {
1081 .name = "a910:red:",
1082 .status = LP3944_LED_STATUS_OFF,
1083 .type = LP3944_LED_TYPE_LED,
1084 },
1085 [1] = {
1086 .name = "a910:green:",
1087 .status = LP3944_LED_STATUS_OFF,
1088 .type = LP3944_LED_TYPE_LED,
1089 },
1090 [2] {
1091 .name = "a910:blue:",
1092 .status = LP3944_LED_STATUS_OFF,
1093 .type = LP3944_LED_TYPE_LED,
1094 },
1095
1096 [3] = {
1097 .name = "a910::cli_display",
1098 .status = LP3944_LED_STATUS_OFF,
1099 .type = LP3944_LED_TYPE_LED_INVERTED
1100 },
1101 [4] = {
1102 .name = "a910::main_display",
1103 .status = LP3944_LED_STATUS_ON,
1104 .type = LP3944_LED_TYPE_LED_INVERTED
1105 },
1106 [5] = { .type = LP3944_LED_TYPE_NONE },
1107 [6] = {
1108 .name = "a910::torch",
1109 .status = LP3944_LED_STATUS_OFF,
1110 .type = LP3944_LED_TYPE_LED,
1111 },
1112 [7] = {
1113 .name = "a910::flash",
1114 .status = LP3944_LED_STATUS_OFF,
1115 .type = LP3944_LED_TYPE_LED_INVERTED,
1116 },
1117 },
1118};
1119
1120static struct i2c_board_info __initdata a910_i2c_board_info[] = {
1121 {
1122 I2C_BOARD_INFO("lp3944", 0x60),
1123 .platform_data = &a910_lp3944_leds,
1124 },
1125};
1126
1127static struct platform_device *a910_devices[] __initdata = {
1128 &a910_gpio_keys,
1129};
1130
1131static void __init a910_init(void)
1132{
1133 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1134 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1135 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
1136
1137 pxa_set_ffuart_info(NULL);
1138 pxa_set_btuart_info(NULL);
1139 pxa_set_stuart_info(NULL);
1140
1141 pxa_set_i2c_info(NULL);
1142 i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
1143
1144 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1145
1146 pxa_set_keypad_info(&a910_keypad_platform_data);
1147
1148 if (a910_camera_init() == 0) {
1149 pxa_set_camera_info(&a910_pxacamera_platform_data);
1150 platform_device_register(&a910_camera);
1151 }
1152
1153 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1154 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1155 platform_add_devices(ARRAY_AND_SIZE(a910_devices));
1156}
1157
1158MACHINE_START(EZX_A910, "Motorola EZX A910")
1159 .atag_offset = 0x100,
1160 .map_io = pxa27x_map_io,
1161 .nr_irqs = EZX_NR_IRQS,
1162 .init_irq = pxa27x_init_irq,
1163 .handle_irq = pxa27x_handle_irq,
1164 .init_time = pxa_timer_init,
1165 .init_machine = a910_init,
1166 .restart = pxa_restart,
1167MACHINE_END
1168#endif
1169
1170#ifdef CONFIG_MACH_EZX_E6
1171
1172static struct gpio_keys_button e6_buttons[] = {
1173 [0] = {
1174 .code = KEY_SCREENLOCK,
1175 .gpio = GPIO15_E6_LOCK_SWITCH,
1176 .active_low = 0,
1177 .desc = "E6 lock switch",
1178 .type = EV_KEY,
1179 .wakeup = 1,
1180 },
1181};
1182
1183static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
1184 .buttons = e6_buttons,
1185 .nbuttons = ARRAY_SIZE(e6_buttons),
1186};
1187
1188static struct platform_device e6_gpio_keys = {
1189 .name = "gpio-keys",
1190 .id = -1,
1191 .dev = {
1192 .platform_data = &e6_gpio_keys_platform_data,
1193 },
1194};
1195
1196static struct i2c_board_info __initdata e6_i2c_board_info[] = {
1197 { I2C_BOARD_INFO("tea5767", 0x81) },
1198};
1199
1200static struct platform_device *e6_devices[] __initdata = {
1201 &e6_gpio_keys,
1202};
1203
1204static void __init e6_init(void)
1205{
1206 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1207 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1208 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
1209
1210 pxa_set_ffuart_info(NULL);
1211 pxa_set_btuart_info(NULL);
1212 pxa_set_stuart_info(NULL);
1213
1214 pxa_set_i2c_info(NULL);
1215 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
1216
1217 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1218
1219 pxa_set_keypad_info(&e6_keypad_platform_data);
1220
1221 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1222 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1223 platform_add_devices(ARRAY_AND_SIZE(e6_devices));
1224}
1225
1226MACHINE_START(EZX_E6, "Motorola EZX E6")
1227 .atag_offset = 0x100,
1228 .map_io = pxa27x_map_io,
1229 .nr_irqs = EZX_NR_IRQS,
1230 .init_irq = pxa27x_init_irq,
1231 .handle_irq = pxa27x_handle_irq,
1232 .init_time = pxa_timer_init,
1233 .init_machine = e6_init,
1234 .restart = pxa_restart,
1235MACHINE_END
1236#endif
1237
1238#ifdef CONFIG_MACH_EZX_E2
1239static struct i2c_board_info __initdata e2_i2c_board_info[] = {
1240 { I2C_BOARD_INFO("tea5767", 0x81) },
1241};
1242
1243static struct platform_device *e2_devices[] __initdata = {
1244};
1245
1246static void __init e2_init(void)
1247{
1248 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1249 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1250 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
1251
1252 pxa_set_ffuart_info(NULL);
1253 pxa_set_btuart_info(NULL);
1254 pxa_set_stuart_info(NULL);
1255
1256 pxa_set_i2c_info(NULL);
1257 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
1258
1259 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1260
1261 pxa_set_keypad_info(&e2_keypad_platform_data);
1262
1263 pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
1264 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1265 platform_add_devices(ARRAY_AND_SIZE(e2_devices));
1266}
1267
1268MACHINE_START(EZX_E2, "Motorola EZX E2")
1269 .atag_offset = 0x100,
1270 .map_io = pxa27x_map_io,
1271 .nr_irqs = EZX_NR_IRQS,
1272 .init_irq = pxa27x_init_irq,
1273 .handle_irq = pxa27x_handle_irq,
1274 .init_time = pxa_timer_init,
1275 .init_machine = e2_init,
1276 .restart = pxa_restart,
1277MACHINE_END
1278#endif
1279
