linux/arch/arm/mach-pxa/mioa701.c
<<
>>
Prefs
   1/*
   2 * Handles the Mitac Mio A701 Board
   3 *
   4 * Copyright (C) 2008 Robert Jarzmik
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19 *
  20 */
  21
  22#include <linux/kernel.h>
  23#include <linux/init.h>
  24#include <linux/platform_device.h>
  25#include <linux/syscore_ops.h>
  26#include <linux/input.h>
  27#include <linux/delay.h>
  28#include <linux/gpio_keys.h>
  29#include <linux/pwm.h>
  30#include <linux/pwm_backlight.h>
  31#include <linux/rtc.h>
  32#include <linux/leds.h>
  33#include <linux/gpio.h>
  34#include <linux/interrupt.h>
  35#include <linux/irq.h>
  36#include <linux/pda_power.h>
  37#include <linux/power_supply.h>
  38#include <linux/wm97xx.h>
  39#include <linux/mtd/physmap.h>
  40#include <linux/usb/gpio_vbus.h>
  41#include <linux/reboot.h>
  42#include <linux/regulator/fixed.h>
  43#include <linux/regulator/max1586.h>
  44#include <linux/slab.h>
  45#include <linux/i2c/pxa-i2c.h>
  46
  47#include <asm/mach-types.h>
  48#include <asm/mach/arch.h>
  49
  50#include "pxa27x.h"
  51#include "regs-rtc.h"
  52#include <linux/platform_data/keypad-pxa27x.h>
  53#include <linux/platform_data/video-pxafb.h>
  54#include <linux/platform_data/mmc-pxamci.h>
  55#include "udc.h"
  56#include "pxa27x-udc.h"
  57#include <linux/platform_data/media/camera-pxa.h>
  58#include <mach/audio.h>
  59#include <mach/smemc.h>
  60#include <media/soc_camera.h>
  61
  62#include "mioa701.h"
  63
  64#include "generic.h"
  65#include "devices.h"
  66
  67static unsigned long mioa701_pin_config[] = {
  68        /* Mio global */
  69        MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
  70        MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
  71        MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
  72        MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
  73        MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
  74
  75        /* Backlight PWM 0 */
  76        GPIO16_PWM0_OUT,
  77
  78        /* MMC */
  79        GPIO32_MMC_CLK,
  80        GPIO92_MMC_DAT_0,
  81        GPIO109_MMC_DAT_1,
  82        GPIO110_MMC_DAT_2,
  83        GPIO111_MMC_DAT_3,
  84        GPIO112_MMC_CMD,
  85        MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
  86        MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
  87        MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
  88
  89        /* USB */
  90        MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
  91        MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
  92
  93        /* LCD */
  94        GPIOxx_LCD_TFT_16BPP,
  95
  96        /* QCI */
  97        GPIO12_CIF_DD_7,
  98        GPIO17_CIF_DD_6,
  99        GPIO50_CIF_DD_3,
 100        GPIO51_CIF_DD_2,
 101        GPIO52_CIF_DD_4,
 102        GPIO53_CIF_MCLK,
 103        GPIO54_CIF_PCLK,
 104        GPIO55_CIF_DD_1,
 105        GPIO81_CIF_DD_0,
 106        GPIO82_CIF_DD_5,
 107        GPIO84_CIF_FV,
 108        GPIO85_CIF_LV,
 109        MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
 110
 111        /* Bluetooth */
 112        MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
 113        GPIO44_BTUART_CTS,
 114        GPIO42_BTUART_RXD,
 115        GPIO45_BTUART_RTS,
 116        GPIO43_BTUART_TXD,
 117        MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
 118        MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
 119        MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
 120
 121        /* GPS */
 122        MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
 123        MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
 124        MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
 125        MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
 126        MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
 127        GPIO46_STUART_RXD,
 128        GPIO47_STUART_TXD,
 129
 130        /* GSM */
 131        MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
 132        MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
 133        MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
 134        MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
 135        MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
 136        MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
 137        GPIO34_FFUART_RXD,
 138        GPIO35_FFUART_CTS,
 139        GPIO36_FFUART_DCD,
 140        GPIO37_FFUART_DSR,
 141        GPIO39_FFUART_TXD,
 142        GPIO40_FFUART_DTR,
 143        GPIO41_FFUART_RTS,
 144
 145        /* Sound */
 146        GPIO28_AC97_BITCLK,
 147        GPIO29_AC97_SDATA_IN_0,
 148        GPIO30_AC97_SDATA_OUT,
 149        GPIO31_AC97_SYNC,
 150        GPIO89_AC97_SYSCLK,
 151        MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 152
 153        /* Leds */
 154        MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
 155        MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
 156        MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
 157        MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
 158        MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
 159
 160        /* Keyboard */
 161        MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
 162        MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
 163        MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
 164        GPIO100_KP_MKIN_0,
 165        GPIO101_KP_MKIN_1,
 166        GPIO102_KP_MKIN_2,
 167        GPIO103_KP_MKOUT_0,
 168        GPIO104_KP_MKOUT_1,
 169        GPIO105_KP_MKOUT_2,
 170
 171        /* I2C */
 172        GPIO117_I2C_SCL,
 173        GPIO118_I2C_SDA,
 174
 175        /* Unknown */
 176        MFP_CFG_IN(GPIO20, AF0),
 177        MFP_CFG_IN(GPIO21, AF0),
 178        MFP_CFG_IN(GPIO33, AF0),
 179        MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
 180        MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
 181        MFP_CFG_IN(GPIO96, AF0),
 182        MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 183};
 184
 185static struct pwm_lookup mioa701_pwm_lookup[] = {
 186        PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
 187                   PWM_POLARITY_NORMAL),
 188};
 189
 190/* LCD Screen and Backlight */
 191static struct platform_pwm_backlight_data mioa701_backlight_data = {
 192        .max_brightness = 100,
 193        .dft_brightness = 50,
 194        .enable_gpio    = -1,
 195};
 196
 197/*
 198 * LTM0305A776C LCD panel timings
 199 *
 200 * see:
 201 *  - the LTM0305A776C datasheet,
 202 *  - and the PXA27x Programmers' manual
 203 */
 204static struct pxafb_mode_info mioa701_ltm0305a776c = {
 205        .pixclock               = 220000,       /* CLK=4.545 MHz */
 206        .xres                   = 240,
 207        .yres                   = 320,
 208        .bpp                    = 16,
 209        .hsync_len              = 4,
 210        .vsync_len              = 2,
 211        .left_margin            = 6,
 212        .right_margin           = 4,
 213        .upper_margin           = 5,
 214        .lower_margin           = 3,
 215};
 216
 217static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
 218{
 219        gpio_set_value(GPIO87_LCD_POWER, on);
 220}
 221
 222static struct pxafb_mach_info mioa701_pxafb_info = {
 223        .modes                  = &mioa701_ltm0305a776c,
 224        .num_modes              = 1,
 225        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 226        .pxafb_lcd_power        = mioa701_lcd_power,
 227};
 228
 229/*
 230 * Keyboard configuration
 231 */
 232static const unsigned int mioa701_matrix_keys[] = {
 233        KEY(0, 0, KEY_UP),
 234        KEY(0, 1, KEY_RIGHT),
 235        KEY(0, 2, KEY_MEDIA),
 236        KEY(1, 0, KEY_DOWN),
 237        KEY(1, 1, KEY_ENTER),
 238        KEY(1, 2, KEY_CONNECT), /* GPS key */
 239        KEY(2, 0, KEY_LEFT),
 240        KEY(2, 1, KEY_PHONE),   /* Phone Green key */
 241        KEY(2, 2, KEY_CAMERA)   /* Camera key */
 242};
 243
 244static struct matrix_keymap_data mioa701_matrix_keymap_data = {
 245        .keymap                 = mioa701_matrix_keys,
 246        .keymap_size            = ARRAY_SIZE(mioa701_matrix_keys),
 247};
 248
 249static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
 250        .matrix_key_rows = 3,
 251        .matrix_key_cols = 3,
 252        .matrix_keymap_data = &mioa701_matrix_keymap_data,
 253};
 254
 255/*
 256 * GPIO Key Configuration
 257 */
 258#define MIO_KEY(key, _gpio, _desc, _wakeup) \
 259        { .code = (key), .gpio = (_gpio), .active_low = 0, \
 260        .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
 261static struct gpio_keys_button mioa701_button_table[] = {
 262        MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
 263        MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
 264        MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
 265        MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
 266};
 267
 268static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
 269        .buttons  = mioa701_button_table,
 270        .nbuttons = ARRAY_SIZE(mioa701_button_table),
 271};
 272
 273/*
 274 * Leds and vibrator
 275 */
 276#define ONE_LED(_gpio, _name) \
 277{ .gpio = (_gpio), .name = (_name), .active_low = true }
 278static struct gpio_led gpio_leds[] = {
 279        ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
 280        ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
 281        ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
 282        ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
 283        ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
 284};
 285
 286static struct gpio_led_platform_data gpio_led_info = {
 287        .leds = gpio_leds,
 288        .num_leds = ARRAY_SIZE(gpio_leds),
 289};
 290
 291/*
 292 * GSM Sagem XS200 chip
 293 *
 294 * GSM handling was purged from kernel. For history, this is the way to go :
 295 *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
 296 *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
 297 *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
 298 *             GPIO24_GSM_MOD_RESET_CMD = 0
 299 *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
 300 *                GPIO88_GSM_nMOD_ON_CMD = 1
 301 *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
 302 *                GPIO90_GSM_nMOD_OFF_CMD = 1
 303 */
 304static int is_gsm_on(void)
 305{
 306        int is_on;
 307
 308        is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
 309        return is_on;
 310}
 311
 312irqreturn_t gsm_on_irq(int irq, void *p)
 313{
 314        printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
 315               is_gsm_on() ? "on" : "off");
 316        return IRQ_HANDLED;
 317}
 318
 319static struct gpio gsm_gpios[] = {
 320        { GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
 321        { GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
 322};
 323
 324static int __init gsm_init(void)
 325{
 326        int rc;
 327
 328        rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
 329        if (rc)
 330                goto err_gpio;
 331        rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
 332                         IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 333                         "GSM XS200 Power Irq", NULL);
 334        if (rc)
 335                goto err_irq;
 336
 337        gpio_set_wake(GPIO113_GSM_EVENT, 1);
 338        return 0;
 339
 340err_irq:
 341        printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
 342        gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 343err_gpio:
 344        printk(KERN_ERR "Mioa701: gsm not available\n");
 345        return rc;
 346}
 347
 348static void gsm_exit(void)
 349{
 350        free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
 351        gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
 352}
 353
 354/*
 355 * Bluetooth BRF6150 chip
 356 *
 357 * BT handling was purged from kernel. For history, this is the way to go :
 358 * - turn on  : GPIO83_BT_ON = 1
 359 * - turn off : GPIO83_BT_ON = 0
 360 */
 361
 362/*
 363 * GPS Sirf Star III chip
 364 *
 365 * GPS handling was purged from kernel. For history, this is the way to go :
 366 * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
 367 *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
 368 * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
 369 * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
 370 */
 371
 372/*
 373 * USB UDC
 374 */
 375static int is_usb_connected(void)
 376{
 377        return !gpio_get_value(GPIO13_nUSB_DETECT);
 378}
 379
 380static struct pxa2xx_udc_mach_info mioa701_udc_info = {
 381        .udc_is_connected = is_usb_connected,
 382        .gpio_pullup      = GPIO22_USB_ENABLE,
 383};
 384
 385struct gpio_vbus_mach_info gpio_vbus_data = {
 386        .gpio_vbus = GPIO13_nUSB_DETECT,
 387        .gpio_vbus_inverted = 1,
 388        .gpio_pullup = -1,
 389};
 390
 391/*
 392 * SDIO/MMC Card controller
 393 */
 394/**
 395 * The card detect interrupt isn't debounced so we delay it by 250ms
 396 * to give the card a chance to fully insert/eject.
 397 */
 398static struct pxamci_platform_data mioa701_mci_info = {
 399        .detect_delay_ms        = 250,
 400        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
 401        .gpio_card_detect       = GPIO15_SDIO_INSERT,
 402        .gpio_card_ro           = GPIO78_SDIO_RO,
 403        .gpio_power             = GPIO91_SDIO_EN,
 404};
 405
 406/* FlashRAM */
 407static struct resource docg3_resource = {
 408        .start = PXA_CS0_PHYS,
 409        .end   = PXA_CS0_PHYS + SZ_8K - 1,
 410        .flags = IORESOURCE_MEM,
 411};
 412
 413static struct platform_device docg3 = {
 414        .name          = "docg3",
 415        .id            = -1,
 416        .resource      = &docg3_resource,
 417        .num_resources = 1,
 418        .dev = {
 419                .platform_data = NULL,
 420        },
 421};
 422
 423/*
 424 * Suspend/Resume bootstrap management
 425 *
 426 * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
 427 * this sequence is as follows :
 428 *   - disables interrupts
 429 *   - initialize SDRAM (self refresh RAM into active RAM)
 430 *   - initialize GPIOs (depends on value at 0xa020b020)
 431 *   - initialize coprossessors
 432 *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
 433 *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
 434 *   - else do a resume, ie. jump to addr 0xa0100000
 435 */
 436#define RESUME_ENABLE_ADDR      0xa020b000
 437#define RESUME_ENABLE_VAL       0x0f0f0f0f
 438#define RESUME_BT_ADDR          0xa020b020
 439#define RESUME_UNKNOWN_ADDR     0xa020b024
 440#define RESUME_VECTOR_ADDR      0xa0100000
 441#define BOOTSTRAP_WORDS         mioa701_bootstrap_lg/4
 442
 443static u32 *save_buffer;
 444
 445static void install_bootstrap(void)
 446{
 447        int i;
 448        u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
 449        u32 *src = &mioa701_bootstrap;
 450
 451        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 452                rom_bootstrap[i] = src[i];
 453}
 454
 455
 456static int mioa701_sys_suspend(void)
 457{
 458        int i = 0, is_bt_on;
 459        u32 *mem_resume_vector  = phys_to_virt(RESUME_VECTOR_ADDR);
 460        u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
 461        u32 *mem_resume_bt      = phys_to_virt(RESUME_BT_ADDR);
 462        u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 463
 464        /* Devices prepare suspend */
 465        is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 466        pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 467                           is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 468
 469        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 470                save_buffer[i] = mem_resume_vector[i];
 471        save_buffer[i++] = *mem_resume_enabler;
 472        save_buffer[i++] = *mem_resume_bt;
 473        save_buffer[i++] = *mem_resume_unknown;
 474
 475        *mem_resume_enabler = RESUME_ENABLE_VAL;
 476        *mem_resume_bt      = is_bt_on;
 477
 478        install_bootstrap();
 479        return 0;
 480}
 481
 482static void mioa701_sys_resume(void)
 483{
 484        int i = 0;
 485        u32 *mem_resume_vector  = phys_to_virt(RESUME_VECTOR_ADDR);
 486        u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
 487        u32 *mem_resume_bt      = phys_to_virt(RESUME_BT_ADDR);
 488        u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 489
 490        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 491                mem_resume_vector[i] = save_buffer[i];
 492        *mem_resume_enabler = save_buffer[i++];
 493        *mem_resume_bt      = save_buffer[i++];
 494        *mem_resume_unknown = save_buffer[i++];
 495}
 496
 497static struct syscore_ops mioa701_syscore_ops = {
 498        .suspend        = mioa701_sys_suspend,
 499        .resume         = mioa701_sys_resume,
 500};
 501
 502static int __init bootstrap_init(void)
 503{
 504        int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
 505
 506        register_syscore_ops(&mioa701_syscore_ops);
 507
 508        save_buffer = kmalloc(save_size, GFP_KERNEL);
 509        if (!save_buffer)
 510                return -ENOMEM;
 511        printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
 512               save_size);
 513        return 0;
 514}
 515
 516static void bootstrap_exit(void)
 517{
 518        kfree(save_buffer);
 519        unregister_syscore_ops(&mioa701_syscore_ops);
 520
 521        printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
 522               "resume !!!\n");
 523}
 524
 525/*
 526 * Power Supply
 527 */
 528static char *supplicants[] = {
 529        "mioa701_battery"
 530};
 531
 532static int is_ac_connected(void)
 533{
 534        return gpio_get_value(GPIO96_AC_DETECT);
 535}
 536
 537static void mioa701_set_charge(int flags)
 538{
 539        gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
 540}
 541
 542static struct pda_power_pdata power_pdata = {
 543        .is_ac_online   = is_ac_connected,
 544        .is_usb_online  = is_usb_connected,
 545        .set_charge = mioa701_set_charge,
 546        .supplied_to = supplicants,
 547        .num_supplicants = ARRAY_SIZE(supplicants),
 548};
 549
 550static struct resource power_resources[] = {
 551        [0] = {
 552                .name   = "ac",
 553                .start  = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
 554                .end    = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
 555                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 556                IORESOURCE_IRQ_LOWEDGE,
 557        },
 558        [1] = {
 559                .name   = "usb",
 560                .start  = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
 561                .end    = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
 562                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 563                IORESOURCE_IRQ_LOWEDGE,
 564        },
 565};
 566
 567static struct platform_device power_dev = {
 568        .name           = "pda-power",
 569        .id             = -1,
 570        .resource       = power_resources,
 571        .num_resources  = ARRAY_SIZE(power_resources),
 572        .dev = {
 573                .platform_data  = &power_pdata,
 574        },
 575};
 576
 577static struct wm97xx_batt_pdata mioa701_battery_data = {
 578        .batt_aux       = WM97XX_AUX_ID1,
 579        .temp_aux       = -1,
 580        .charge_gpio    = -1,
 581        .min_voltage    = 0xc00,
 582        .max_voltage    = 0xfc0,
 583        .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LION,
 584        .batt_div       = 1,
 585        .batt_mult      = 1,
 586        .batt_name      = "mioa701_battery",
 587};
 588
 589static struct wm97xx_pdata mioa701_wm97xx_pdata = {
 590        .batt_pdata     = &mioa701_battery_data,
 591};
 592
 593/*
 594 * Voltage regulation
 595 */
 596static struct regulator_consumer_supply max1586_consumers[] = {
 597        REGULATOR_SUPPLY("vcc_core", NULL),
 598};
 599
 600static struct regulator_init_data max1586_v3_info = {
 601        .constraints = {
 602                .name = "vcc_core range",
 603                .min_uV = 1000000,
 604                .max_uV = 1705000,
 605                .always_on = 1,
 606                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 607        },
 608        .num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
 609        .consumer_supplies = max1586_consumers,
 610};
 611
 612static struct max1586_subdev_data max1586_subdevs[] = {
 613        { .name = "vcc_core", .id = MAX1586_V3,
 614          .platform_data = &max1586_v3_info },
 615};
 616
 617static struct max1586_platform_data max1586_info = {
 618        .subdevs = max1586_subdevs,
 619        .num_subdevs = ARRAY_SIZE(max1586_subdevs),
 620        .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
 621};
 622
 623/*
 624 * Camera interface
 625 */
 626struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
 627        .flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 628                PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 629        .mclk_10khz = 5000,
 630};
 631
 632static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 633        {
 634                I2C_BOARD_INFO("max1586", 0x14),
 635                .platform_data = &max1586_info,
 636        },
 637};
 638
 639/* Board I2C devices. */
 640static struct i2c_board_info mioa701_i2c_devices[] = {
 641        {
 642                I2C_BOARD_INFO("mt9m111", 0x5d),
 643        },
 644};
 645
 646static struct soc_camera_link iclink = {
 647        .bus_id         = 0, /* Match id in pxa27x_device_camera in device.c */
 648        .board_info     = &mioa701_i2c_devices[0],
 649        .i2c_adapter_id = 0,
 650};
 651
 652struct i2c_pxa_platform_data i2c_pdata = {
 653        .fast_mode = 1,
 654};
 655
 656static pxa2xx_audio_ops_t mioa701_ac97_info = {
 657        .reset_gpio = 95,
 658        .codec_pdata = { &mioa701_wm97xx_pdata, },
 659};
 660
 661/*
 662 * Mio global
 663 */
 664
 665/* Devices */
 666#define MIO_PARENT_DEV(var, strname, tparent, pdata)    \
 667static struct platform_device var = {                   \
 668        .name           = strname,                      \
 669        .id             = -1,                           \
 670        .dev            = {                             \
 671                .platform_data = pdata,                 \
 672                .parent = tparent,                      \
 673        },                                              \
 674};
 675#define MIO_SIMPLE_DEV(var, strname, pdata)     \
 676        MIO_PARENT_DEV(var, strname, NULL, pdata)
 677
 678MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",      &mioa701_gpio_keys_data)
 679MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
 680                &mioa701_backlight_data);
 681MIO_SIMPLE_DEV(mioa701_led,       "leds-gpio",      &gpio_led_info)
 682MIO_SIMPLE_DEV(pxa2xx_pcm,        "pxa2xx-pcm",     NULL)
 683MIO_SIMPLE_DEV(mioa701_sound,     "mioa701-wm9713", NULL)
 684MIO_SIMPLE_DEV(mioa701_board,     "mioa701-board",  NULL)
 685MIO_SIMPLE_DEV(wm9713_acodec,     "wm9713-codec",   NULL);
 686MIO_SIMPLE_DEV(gpio_vbus,         "gpio-vbus",      &gpio_vbus_data);
 687MIO_SIMPLE_DEV(mioa701_camera,    "soc-camera-pdrv",&iclink);
 688
 689static struct platform_device *devices[] __initdata = {
 690        &mioa701_gpio_keys,
 691        &mioa701_backlight,
 692        &mioa701_led,
 693        &wm9713_acodec,
 694        &pxa2xx_pcm,
 695        &mioa701_sound,
 696        &power_dev,
 697        &docg3,
 698        &gpio_vbus,
 699        &mioa701_camera,
 700        &mioa701_board,
 701};
 702
 703static void mioa701_machine_exit(void);
 704
 705static void mioa701_poweroff(void)
 706{
 707        mioa701_machine_exit();
 708        pxa_restart(REBOOT_SOFT, NULL);
 709}
 710
 711static void mioa701_restart(enum reboot_mode c, const char *cmd)
 712{
 713        mioa701_machine_exit();
 714        pxa_restart(REBOOT_SOFT, cmd);
 715}
 716
 717static struct gpio global_gpios[] = {
 718        { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
 719        { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
 720        { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
 721        { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 722};
 723
 724static struct regulator_consumer_supply fixed_5v0_consumers[] = {
 725        REGULATOR_SUPPLY("power", "pwm-backlight"),
 726};
 727
 728static void __init mioa701_machine_init(void)
 729{
 730        int rc;
 731
 732        PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
 733        PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
 734        RTTR = 32768 - 1; /* Reset crazy WinCE value */
 735        UP2OCR = UP2OCR_HXOE;
 736
 737        /*
 738         * Set up the flash memory : DiskOnChip G3 on first static memory bank
 739         */
 740        __raw_writel(0x7ff02dd8, MSC0);
 741        __raw_writel(0x0001c391, MCMEM0);
 742        __raw_writel(0x0001c391, MCATT0);
 743        __raw_writel(0x0001c391, MCIO0);
 744
 745
 746        pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
 747        pxa_set_ffuart_info(NULL);
 748        pxa_set_btuart_info(NULL);
 749        pxa_set_stuart_info(NULL);
 750        rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 751        if (rc)
 752                pr_err("MioA701: Failed to request GPIOs: %d", rc);
 753        bootstrap_init();
 754        pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 755        pxa_set_mci_info(&mioa701_mci_info);
 756        pxa_set_keypad_info(&mioa701_keypad_info);
 757        pxa_set_udc_info(&mioa701_udc_info);
 758        pxa_set_ac97_info(&mioa701_ac97_info);
 759        pm_power_off = mioa701_poweroff;
 760        pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
 761        platform_add_devices(devices, ARRAY_SIZE(devices));
 762        gsm_init();
 763
 764        i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
 765        pxa_set_i2c_info(&i2c_pdata);
 766        pxa27x_set_i2c_power_info(NULL);
 767        pxa_set_camera_info(&mioa701_pxacamera_platform_data);
 768
 769        regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
 770                                     ARRAY_SIZE(fixed_5v0_consumers),
 771                                     5000000);
 772}
 773
 774static void mioa701_machine_exit(void)
 775{
 776        bootstrap_exit();
 777        gsm_exit();
 778}
 779
 780MACHINE_START(MIOA701, "MIO A701")
 781        .atag_offset    = 0x100,
 782        .map_io         = &pxa27x_map_io,
 783        .nr_irqs        = PXA_NR_IRQS,
 784        .init_irq       = &pxa27x_init_irq,
 785        .handle_irq     = &pxa27x_handle_irq,
 786        .init_machine   = mioa701_machine_init,
 787        .init_time      = pxa_timer_init,
 788        .restart        = mioa701_restart,
 789MACHINE_END
 790