linux/arch/arm/mach-pxa/zylonite.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-pxa/zylonite.c
   3 *
   4 * Support for the PXA3xx Development Platform (aka Zylonite)
   5 *
   6 * Copyright (C) 2006 Marvell International Ltd.
   7 *
   8 * 2007-09-04: eric miao <eric.miao@marvell.com>
   9 *             rewrite to align with latest kernel
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License version 2 as
  13 * published by the Free Software Foundation.
  14 */
  15
  16#include <linux/module.h>
  17#include <linux/kernel.h>
  18#include <linux/interrupt.h>
  19#include <linux/init.h>
  20#include <linux/platform_device.h>
  21#include <linux/gpio.h>
  22#include <linux/pwm.h>
  23#include <linux/pwm_backlight.h>
  24#include <linux/smc91x.h>
  25
  26#include <asm/mach-types.h>
  27#include <asm/mach/arch.h>
  28#include "pxa3xx.h"
  29#include <mach/audio.h>
  30#include <linux/platform_data/video-pxafb.h>
  31#include "zylonite.h"
  32#include <linux/platform_data/mmc-pxamci.h>
  33#include <linux/platform_data/usb-ohci-pxa27x.h>
  34#include <linux/platform_data/keypad-pxa27x.h>
  35#include <linux/platform_data/mtd-nand-pxa3xx.h>
  36
  37#include "devices.h"
  38#include "generic.h"
  39
  40int gpio_eth_irq;
  41int gpio_debug_led1;
  42int gpio_debug_led2;
  43
  44int wm9713_irq;
  45
  46int lcd_id;
  47int lcd_orientation;
  48
  49struct platform_device pxa_device_wm9713_audio = {
  50        .name           = "wm9713-codec",
  51        .id             = -1,
  52};
  53
  54static void __init zylonite_init_wm9713_audio(void)
  55{
  56        platform_device_register(&pxa_device_wm9713_audio);
  57}
  58
  59static struct resource smc91x_resources[] = {
  60        [0] = {
  61                .start  = ZYLONITE_ETH_PHYS + 0x300,
  62                .end    = ZYLONITE_ETH_PHYS + 0xfffff,
  63                .flags  = IORESOURCE_MEM,
  64        },
  65        [1] = {
  66                .start  = -1,   /* for run-time assignment */
  67                .end    = -1,
  68                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  69        }
  70};
  71
  72static struct smc91x_platdata zylonite_smc91x_info = {
  73        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
  74                  SMC91X_NOWAIT | SMC91X_USE_DMA,
  75};
  76
  77static struct platform_device smc91x_device = {
  78        .name           = "smc91x",
  79        .id             = 0,
  80        .num_resources  = ARRAY_SIZE(smc91x_resources),
  81        .resource       = smc91x_resources,
  82        .dev            = {
  83                .platform_data = &zylonite_smc91x_info,
  84        },
  85};
  86
  87#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
  88static struct gpio_led zylonite_debug_leds[] = {
  89        [0] = {
  90                .name                   = "zylonite:yellow:1",
  91                .default_trigger        = "heartbeat",
  92        },
  93        [1] = {
  94                .name                   = "zylonite:yellow:2",
  95                .default_trigger        = "default-on",
  96        },
  97};
  98
  99static struct gpio_led_platform_data zylonite_debug_leds_info = {
 100        .leds           = zylonite_debug_leds,
 101        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
 102};
 103
 104static struct platform_device zylonite_device_leds = {
 105        .name           = "leds-gpio",
 106        .id             = -1,
 107        .dev            = {
 108                .platform_data = &zylonite_debug_leds_info,
 109        }
 110};
 111
 112static void __init zylonite_init_leds(void)
 113{
 114        zylonite_debug_leds[0].gpio = gpio_debug_led1;
 115        zylonite_debug_leds[1].gpio = gpio_debug_led2;
 116
 117        platform_device_register(&zylonite_device_leds);
 118}
 119#else
 120static inline void zylonite_init_leds(void) {}
 121#endif
 122
 123#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 124static struct pwm_lookup zylonite_pwm_lookup[] = {
 125        PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
 126                   PWM_POLARITY_NORMAL),
 127};
 128
 129static struct platform_pwm_backlight_data zylonite_backlight_data = {
 130        .max_brightness = 100,
 131        .dft_brightness = 100,
 132        .enable_gpio    = -1,
 133};
 134
 135static struct platform_device zylonite_backlight_device = {
 136        .name           = "pwm-backlight",
 137        .dev            = {
 138                .parent = &pxa27x_device_pwm1.dev,
 139                .platform_data  = &zylonite_backlight_data,
 140        },
 141};
 142
 143static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
 144        .pixclock               = 110000,
 145        .xres                   = 240,
 146        .yres                   = 320,
 147        .bpp                    = 16,
 148        .hsync_len              = 4,
 149        .left_margin            = 6,
 150        .right_margin           = 4,
 151        .vsync_len              = 2,
 152        .upper_margin           = 2,
 153        .lower_margin           = 3,
 154        .sync                   = FB_SYNC_VERT_HIGH_ACT,
 155};
 156
 157static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 158        .pixclock               = 50000,
 159        .xres                   = 640,
 160        .yres                   = 480,
 161        .bpp                    = 16,
 162        .hsync_len              = 1,
 163        .left_margin            = 0x9f,
 164        .right_margin           = 1,
 165        .vsync_len              = 44,
 166        .upper_margin           = 0,
 167        .lower_margin           = 0,
 168        .sync                   = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
 169};
 170
 171static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
 172        .num_modes              = 1,
 173        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 174};
 175
 176static struct pxafb_mode_info sharp_ls037_modes[] = {
 177        [0] = {
 178                .pixclock       = 158000,
 179                .xres           = 240,
 180                .yres           = 320,
 181                .bpp            = 16,
 182                .hsync_len      = 4,
 183                .left_margin    = 39,
 184                .right_margin   = 39,
 185                .vsync_len      = 1,
 186                .upper_margin   = 2,
 187                .lower_margin   = 3,
 188                .sync           = 0,
 189        },
 190        [1] = {
 191                .pixclock       = 39700,
 192                .xres           = 480,
 193                .yres           = 640,
 194                .bpp            = 16,
 195                .hsync_len      = 8,
 196                .left_margin    = 81,
 197                .right_margin   = 81,
 198                .vsync_len      = 1,
 199                .upper_margin   = 2,
 200                .lower_margin   = 7,
 201                .sync           = 0,
 202        },
 203};
 204
 205static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 206        .modes                  = sharp_ls037_modes,
 207        .num_modes              = 2,
 208        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 209};
 210
 211static void __init zylonite_init_lcd(void)
 212{
 213        pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
 214        platform_device_register(&zylonite_backlight_device);
 215
 216        if (lcd_id & 0x20) {
 217                pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
 218                return;
 219        }
 220
 221        /* legacy LCD panels, it would be handy here if LCD panel type can
 222         * be decided at run-time
 223         */
 224        if (1)
 225                zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
 226        else
 227                zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 228
 229        pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
 230}
 231#else
 232static inline void zylonite_init_lcd(void) {}
 233#endif
 234
 235#if defined(CONFIG_MMC)
 236static struct pxamci_platform_data zylonite_mci_platform_data = {
 237        .detect_delay_ms= 200,
 238        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 239        .gpio_card_detect = EXT_GPIO(0),
 240        .gpio_card_ro   = EXT_GPIO(2),
 241        .gpio_power     = -1,
 242};
 243
 244static struct pxamci_platform_data zylonite_mci2_platform_data = {
 245        .detect_delay_ms= 200,
 246        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 247        .gpio_card_detect = EXT_GPIO(1),
 248        .gpio_card_ro   = EXT_GPIO(3),
 249        .gpio_power     = -1,
 250};
 251
 252static struct pxamci_platform_data zylonite_mci3_platform_data = {
 253        .detect_delay_ms= 200,
 254        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 255        .gpio_card_detect = EXT_GPIO(30),
 256        .gpio_card_ro   = EXT_GPIO(31),
 257        .gpio_power     = -1,
 258};
 259
 260static void __init zylonite_init_mmc(void)
 261{
 262        pxa_set_mci_info(&zylonite_mci_platform_data);
 263        pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 264        if (cpu_is_pxa310())
 265                pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 266}
 267#else
 268static inline void zylonite_init_mmc(void) {}
 269#endif
 270
 271#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 272static const unsigned int zylonite_matrix_key_map[] = {
 273        /* KEY(row, col, key_code) */
 274        KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
 275        KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
 276        KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
 277        KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
 278        KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
 279        KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
 280        KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
 281
 282        KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
 283        KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
 284        KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
 285
 286        KEY(4, 5, KEY_SPACE),
 287        KEY(5, 3, KEY_KPASTERISK),      /* * */
 288        KEY(5, 4, KEY_KPDOT),           /* #" */
 289
 290        KEY(0, 7, KEY_UP),
 291        KEY(1, 7, KEY_DOWN),
 292        KEY(2, 7, KEY_LEFT),
 293        KEY(3, 7, KEY_RIGHT),
 294        KEY(2, 6, KEY_HOME),
 295        KEY(3, 6, KEY_END),
 296        KEY(6, 4, KEY_DELETE),
 297        KEY(6, 6, KEY_BACK),
 298        KEY(6, 3, KEY_CAPSLOCK),        /* KEY_LEFTSHIFT), */
 299
 300        KEY(4, 6, KEY_ENTER),           /* scroll push */
 301        KEY(5, 7, KEY_ENTER),           /* keypad action */
 302
 303        KEY(0, 4, KEY_EMAIL),
 304        KEY(5, 6, KEY_SEND),
 305        KEY(4, 0, KEY_CALENDAR),
 306        KEY(7, 6, KEY_RECORD),
 307        KEY(6, 7, KEY_VOLUMEUP),
 308        KEY(7, 7, KEY_VOLUMEDOWN),
 309
 310        KEY(0, 6, KEY_F22),     /* soft1 */
 311        KEY(1, 6, KEY_F23),     /* soft2 */
 312        KEY(0, 3, KEY_AUX),     /* contact */
 313};
 314
 315static struct matrix_keymap_data zylonite_matrix_keymap_data = {
 316        .keymap                 = zylonite_matrix_key_map,
 317        .keymap_size            = ARRAY_SIZE(zylonite_matrix_key_map),
 318};
 319
 320static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
 321        .matrix_key_rows        = 8,
 322        .matrix_key_cols        = 8,
 323        .matrix_keymap_data     = &zylonite_matrix_keymap_data,
 324
 325        .enable_rotary0         = 1,
 326        .rotary0_up_key         = KEY_UP,
 327        .rotary0_down_key       = KEY_DOWN,
 328
 329        .debounce_interval      = 30,
 330};
 331
 332static void __init zylonite_init_keypad(void)
 333{
 334        pxa_set_keypad_info(&zylonite_keypad_info);
 335}
 336#else
 337static inline void zylonite_init_keypad(void) {}
 338#endif
 339
 340#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 341static struct mtd_partition zylonite_nand_partitions[] = {
 342        [0] = {
 343                .name        = "Bootloader",
 344                .offset      = 0,
 345                .size        = 0x060000,
 346                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 347        },
 348        [1] = {
 349                .name        = "Kernel",
 350                .offset      = 0x060000,
 351                .size        = 0x200000,
 352                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 353        },
 354        [2] = {
 355                .name        = "Filesystem",
 356                .offset      = 0x0260000,
 357                .size        = 0x3000000,     /* 48M - rootfs */
 358        },
 359        [3] = {
 360                .name        = "MassStorage",
 361                .offset      = 0x3260000,
 362                .size        = 0x3d40000,
 363        },
 364        [4] = {
 365                .name        = "BBT",
 366                .offset      = 0x6FA0000,
 367                .size        = 0x80000,
 368                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
 369        },
 370        /* NOTE: we reserve some blocks at the end of the NAND flash for
 371         * bad block management, and the max number of relocation blocks
 372         * differs on different platforms. Please take care with it when
 373         * defining the partition table.
 374         */
 375};
 376
 377static struct pxa3xx_nand_platform_data zylonite_nand_info = {
 378        .enable_arbiter = 1,
 379        .num_cs         = 1,
 380        .parts[0]       = zylonite_nand_partitions,
 381        .nr_parts[0]    = ARRAY_SIZE(zylonite_nand_partitions),
 382};
 383
 384static void __init zylonite_init_nand(void)
 385{
 386        pxa3xx_set_nand_info(&zylonite_nand_info);
 387}
 388#else
 389static inline void zylonite_init_nand(void) {}
 390#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
 391
 392#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 393static struct pxaohci_platform_data zylonite_ohci_info = {
 394        .port_mode      = PMM_PERPORT_MODE,
 395        .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
 396                          POWER_CONTROL_LOW | POWER_SENSE_LOW,
 397};
 398
 399static void __init zylonite_init_ohci(void)
 400{
 401        pxa_set_ohci_info(&zylonite_ohci_info);
 402}
 403#else
 404static inline void zylonite_init_ohci(void) {}
 405#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 406
 407static void __init zylonite_init(void)
 408{
 409        pxa_set_ffuart_info(NULL);
 410        pxa_set_btuart_info(NULL);
 411        pxa_set_stuart_info(NULL);
 412
 413        /* board-processor specific initialization */
 414        zylonite_pxa300_init();
 415        zylonite_pxa320_init();
 416
 417        /*
 418         * Note: We depend that the bootloader set
 419         * the correct value to MSC register for SMC91x.
 420         */
 421        smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 422        smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 423        platform_device_register(&smc91x_device);
 424
 425        pxa_set_ac97_info(NULL);
 426        zylonite_init_lcd();
 427        zylonite_init_mmc();
 428        zylonite_init_keypad();
 429        zylonite_init_nand();
 430        zylonite_init_leds();
 431        zylonite_init_ohci();
 432        zylonite_init_wm9713_audio();
 433}
 434
 435MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 436        .atag_offset    = 0x100,
 437        .map_io         = pxa3xx_map_io,
 438        .nr_irqs        = ZYLONITE_NR_IRQS,
 439        .init_irq       = pxa3xx_init_irq,
 440        .handle_irq     = pxa3xx_handle_irq,
 441        .init_time      = pxa_timer_init,
 442        .init_machine   = zylonite_init,
 443        .restart        = pxa_restart,
 444MACHINE_END
 445