1/* 2 * Copyright 2008-2010 Analog Devices Inc. 3 * 4 * Licensed under the Clear BSD license or the GPL-2 (or later) 5 */ 6 7#ifndef _DEF_BF547_H 8#define _DEF_BF547_H 9 10/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ 11#include "defBF54x_base.h" 12 13/* The following are the #defines needed by ADSP-BF547 that are not in the common header */ 14 15/* Timer Registers */ 16 17#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ 18#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ 19#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ 20#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ 21#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ 22#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ 23#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ 24#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ 25#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ 26#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ 27#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ 28#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ 29 30/* Timer Group of 3 Registers */ 31 32#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ 33#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ 34#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ 35 36/* SPORT0 Registers */ 37 38#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ 39#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ 40#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ 41#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ 42#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ 43#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ 44#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ 45#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ 46#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ 47#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ 48#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ 49#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ 50#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ 51#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ 52#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ 53#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ 54#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ 55#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ 56#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ 57#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ 58#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ 59#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ 60 61/* EPPI0 Registers */ 62 63#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ 64#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ 65#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ 66#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ 67#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ 68#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ 69#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ 70#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ 71#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ 72#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ 73#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ 74#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ 75#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ 76#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ 77 78/* UART2 Registers */ 79 80#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ 81#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ 82#define UART2_GCTL 0xffc02108 /* Global Control Register */ 83#define UART2_LCR 0xffc0210c /* Line Control Register */ 84#define UART2_MCR 0xffc02110 /* Modem Control Register */ 85#define UART2_LSR 0xffc02114 /* Line Status Register */ 86#define UART2_MSR 0xffc02118 /* Modem Status Register */ 87#define UART2_SCR 0xffc0211c /* Scratch Register */ 88#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ 89#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ 90#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ 91 92/* Two Wire Interface Registers (TWI1) */ 93 94#define TWI1_REGBASE 0xffc02200 95#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ 96#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ 97#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ 98#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ 99#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ 100#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ 101#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ 102#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ 103#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ 104#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ 105#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ 106#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ 107#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ 108#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ 109#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ 110#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ 111 112/* SPI2 Registers */ 113 114#define SPI2_REGBASE 0xffc02400 115#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ 116#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ 117#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ 118#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ 119#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ 120#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ 121#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ 122 123/* ATAPI Registers */ 124 125#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ 126#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ 127#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ 128#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ 129#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ 130#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ 131#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ 132#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ 133#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ 134#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ 135#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ 136#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ 137#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ 138#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ 139#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ 140#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ 141#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ 142#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ 143#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ 144#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ 145#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ 146#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ 147#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ 148#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ 149#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ 150 151/* SDH Registers */ 152 153#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ 154#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ 155#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ 156#define SDH_COMMAND 0xffc0390c /* SDH Command */ 157#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ 158#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ 159#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ 160#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ 161#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ 162#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ 163#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ 164#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ 165#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ 166#define SDH_STATUS 0xffc03934 /* SDH Status */ 167#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ 168#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ 169#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ 170#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ 171#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ 172#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ 173#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ 174#define SDH_CFG 0xffc039c8 /* SDH Configuration */ 175#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ 176#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ 177#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ 178#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ 179#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ 180#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ 181#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ 182#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ 183#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ 184 185/* HOST Port Registers */ 186 187#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ 188#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ 189#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ 190 191/* USB Control Registers */ 192 193#define USB_FADDR 0xffc03c00 /* Function address register */ 194#define USB_POWER 0xffc03c04 /* Power management register */ 195#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ 196#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ 197#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ 198#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ 199#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ 200#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ 201#define USB_FRAME 0xffc03c20 /* USB frame number */ 202#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ 203#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ 204#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ 205#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ 206 207/* USB Packet Control Registers */ 208 209#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ 210#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ 211#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ 212#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ 213#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ 214#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ 215#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ 216#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ 217#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ 218#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ 219#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ 220#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ 221#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ 222 223/* USB Endpoint FIFO Registers */ 224 225#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ 226#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ 227#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ 228#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ 229#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ 230#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ 231#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ 232#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ 233 234/* USB OTG Control Registers */ 235 236#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ 237#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ 238#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ 239 240/* USB Phy Control Registers */ 241 242#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ 243#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ 244#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ 245#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ 246#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ 247 248/* (APHY_CNTRL is for ADI usage only) */ 249 250#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ 251 252/* (APHY_CALIB is for ADI usage only) */ 253 254#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ 255#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ 256 257#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ 258#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ 259 260/* USB Endpoint 0 Control Registers */ 261 262#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ 263#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ 264#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ 265#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ 266#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ 267#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ 268#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ 269#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ 270#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ 271#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ 272 273/* USB Endpoint 1 Control Registers */ 274 275#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ 276#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ 277#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ 278#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ 279#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ 280#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ 281#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ 282#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ 283#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ 284#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ 285 286/* USB Endpoint 2 Control Registers */ 287 288#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ 289#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ 290#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ 291#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ 292#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ 293#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ 294#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ 295#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ 296#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ 297#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ 298 299/* USB Endpoint 3 Control Registers */ 300 301#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ 302#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ 303#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ 304#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ 305#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ 306#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ 307#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ 308#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ 309#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ 310#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ 311 312/* USB Endpoint 4 Control Registers */ 313 314#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ 315#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ 316#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ 317#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ 318#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ 319#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ 320#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ 321#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ 322#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ 323#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ 324 325/* USB Endpoint 5 Control Registers */ 326 327#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ 328#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ 329#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ 330#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ 331#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ 332#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ 333#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ 334#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ 335#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ 336#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ 337 338/* USB Endpoint 6 Control Registers */ 339 340#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ 341#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ 342#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ 343#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ 344#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ 345#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ 346#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ 347#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ 348#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ 349#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ 350 351/* USB Endpoint 7 Control Registers */ 352 353#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ 354#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ 355#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ 356#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ 357#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ 358#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ 359#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ 360#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ 361#define USB_EP_NI7_RXINTERVAL 0xffc03fe0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ 362#define USB_EP_NI7_TXCOUNT 0xffc03fe8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ 363 364#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ 365 366/* USB Channel 0 Config Registers */ 367 368#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ 369#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ 370#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ 371#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ 372#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ 373 374/* USB Channel 1 Config Registers */ 375 376#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ 377#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ 378#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ 379#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ 380#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ 381 382/* USB Channel 2 Config Registers */ 383 384#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ 385#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ 386#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ 387#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ 388#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ 389 390/* USB Channel 3 Config Registers */ 391 392#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ 393#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ 394#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ 395#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ 396#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ 397 398/* USB Channel 4 Config Registers */ 399 400#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ 401#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ 402#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ 403#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ 404#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ 405 406/* USB Channel 5 Config Registers */ 407 408#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ 409#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ 410#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ 411#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ 412#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ 413 414/* USB Channel 6 Config Registers */ 415 416#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ 417#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ 418#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ 419#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ 420#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ 421 422/* USB Channel 7 Config Registers */ 423 424#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ 425#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ 426#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ 427#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ 428#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ 429 430/* Keypad Registers */ 431 432#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ 433#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ 434#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ 435#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ 436#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ 437#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ 438 439/* Pixel Compositor (PIXC) Registers */ 440 441#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ 442#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ 443#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ 444#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ 445#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ 446#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ 447#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ 448#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ 449#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ 450#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ 451#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ 452#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ 453#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ 454#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ 455#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ 456#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ 457#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ 458#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ 459#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ 460 461/* Handshake MDMA 0 Registers */ 462 463#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ 464#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ 465#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ 466#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ 467#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ 468#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ 469#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ 470 471/* Handshake MDMA 1 Registers */ 472 473#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ 474#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ 475#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ 476#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ 477#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ 478#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ 479#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ 480 481 482/* ********************************************************** */ 483/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ 484/* and MULTI BIT READ MACROS */ 485/* ********************************************************** */ 486 487/* Bit masks for PIXC_CTL */ 488 489#define PIXC_EN 0x1 /* Pixel Compositor Enable */ 490#define OVR_A_EN 0x2 /* Overlay A Enable */ 491#define OVR_B_EN 0x4 /* Overlay B Enable */ 492#define IMG_FORM 0x8 /* Image Data Format */ 493#define OVR_FORM 0x10 /* Overlay Data Format */ 494#define OUT_FORM 0x20 /* Output Data Format */ 495#define UDS_MOD 0x40 /* Resampling Mode */ 496#define TC_EN 0x80 /* Transparent Color Enable */ 497#define IMG_STAT 0x300 /* Image FIFO Status */ 498#define OVR_STAT 0xc00 /* Overlay FIFO Status */ 499#define WM_LVL 0x3000 /* FIFO Watermark Level */ 500 501/* Bit masks for PIXC_AHSTART */ 502 503#define A_HSTART 0xfff /* Horizontal Start Coordinates */ 504 505/* Bit masks for PIXC_AHEND */ 506 507#define A_HEND 0xfff /* Horizontal End Coordinates */ 508 509/* Bit masks for PIXC_AVSTART */ 510 511#define A_VSTART 0x3ff /* Vertical Start Coordinates */ 512 513/* Bit masks for PIXC_AVEND */ 514 515#define A_VEND 0x3ff /* Vertical End Coordinates */ 516 517/* Bit masks for PIXC_ATRANSP */ 518 519#define A_TRANSP 0xf /* Transparency Value */ 520 521/* Bit masks for PIXC_BHSTART */ 522 523#define B_HSTART 0xfff /* Horizontal Start Coordinates */ 524 525/* Bit masks for PIXC_BHEND */ 526 527#define B_HEND 0xfff /* Horizontal End Coordinates */ 528 529/* Bit masks for PIXC_BVSTART */ 530 531#define B_VSTART 0x3ff /* Vertical Start Coordinates */ 532 533/* Bit masks for PIXC_BVEND */ 534 535#define B_VEND 0x3ff /* Vertical End Coordinates */ 536 537/* Bit masks for PIXC_BTRANSP */ 538 539#define B_TRANSP 0xf /* Transparency Value */ 540 541/* Bit masks for PIXC_INTRSTAT */ 542 543#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ 544#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ 545#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ 546#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ 547 548/* Bit masks for PIXC_RYCON */ 549 550#define A11 0x3ff /* A11 in the Coefficient Matrix */ 551#define A12 0xffc00 /* A12 in the Coefficient Matrix */ 552#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ 553#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ 554 555/* Bit masks for PIXC_GUCON */ 556 557#define A21 0x3ff /* A21 in the Coefficient Matrix */ 558#define A22 0xffc00 /* A22 in the Coefficient Matrix */ 559#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ 560#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ 561 562/* Bit masks for PIXC_BVCON */ 563 564#define A31 0x3ff /* A31 in the Coefficient Matrix */ 565#define A32 0xffc00 /* A32 in the Coefficient Matrix */ 566#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ 567#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ 568 569/* Bit masks for PIXC_CCBIAS */ 570 571#define A14 0x3ff /* A14 in the Bias Vector */ 572#define A24 0xffc00 /* A24 in the Bias Vector */ 573#define A34 0x3ff00000 /* A34 in the Bias Vector */ 574 575/* Bit masks for PIXC_TC */ 576 577#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ 578#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ 579#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ 580 581/* Bit masks for KPAD_CTL */ 582 583#define KPAD_EN 0x1 /* Keypad Enable */ 584#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ 585#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ 586#define KPAD_COLEN 0xe000 /* Column Enable Width */ 587 588/* Bit masks for KPAD_PRESCALE */ 589 590#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ 591 592/* Bit masks for KPAD_MSEL */ 593 594#define DBON_SCALE 0xff /* Debounce Scale Value */ 595#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ 596 597/* Bit masks for KPAD_ROWCOL */ 598 599#define KPAD_ROW 0xff /* Rows Pressed */ 600#define KPAD_COL 0xff00 /* Columns Pressed */ 601 602/* Bit masks for KPAD_STAT */ 603 604#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ 605#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ 606#define KPAD_PRESSED 0x8 /* Key press current status */ 607 608/* Bit masks for KPAD_SOFTEVAL */ 609 610#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ 611 612/* Bit masks for ATAPI_CONTROL */ 613 614#define PIO_START 0x1 /* Start PIO/Reg Op */ 615#define MULTI_START 0x2 /* Start Multi-DMA Op */ 616#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ 617#define XFER_DIR 0x8 /* Transfer Direction */ 618#define IORDY_EN 0x10 /* IORDY Enable */ 619#define FIFO_FLUSH 0x20 /* Flush FIFOs */ 620#define SOFT_RST 0x40 /* Soft Reset */ 621#define DEV_RST 0x80 /* Device Reset */ 622#define TFRCNT_RST 0x100 /* Trans Count Reset */ 623#define END_ON_TERM 0x200 /* End/Terminate Select */ 624#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ 625#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ 626 627/* Bit masks for ATAPI_STATUS */ 628 629#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ 630#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ 631#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ 632#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ 633 634/* Bit masks for ATAPI_DEV_ADDR */ 635 636#define DEV_ADDR 0x1f /* Device Address */ 637 638/* Bit masks for ATAPI_INT_MASK */ 639 640#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ 641#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ 642#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ 643#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ 644#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ 645#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ 646#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ 647#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ 648#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ 649 650/* Bit masks for ATAPI_INT_STATUS */ 651 652#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ 653#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ 654#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ 655#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ 656#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ 657#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ 658#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ 659#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ 660#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ 661 662/* Bit masks for ATAPI_LINE_STATUS */ 663 664#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ 665#define ATAPI_DASP 0x2 /* Device dasp to host line status */ 666#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ 667#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ 668#define ATAPI_ADDR 0x70 /* ATAPI address line status */ 669#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ 670#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ 671#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ 672#define ATAPI_DIORN 0x400 /* ATAPI read line status */ 673#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ 674 675/* Bit masks for ATAPI_SM_STATE */ 676 677#define PIO_CSTATE 0xf /* PIO mode state machine current state */ 678#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ 679#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ 680#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ 681 682/* Bit masks for ATAPI_TERMINATE */ 683 684#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ 685 686/* Bit masks for ATAPI_REG_TIM_0 */ 687 688#define T2_REG 0xff /* End of cycle time for register access transfers */ 689#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ 690 691/* Bit masks for ATAPI_PIO_TIM_0 */ 692 693#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ 694#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ 695#define T4_REG 0xf000 /* DIOW data hold */ 696 697/* Bit masks for ATAPI_PIO_TIM_1 */ 698 699#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ 700 701/* Bit masks for ATAPI_MULTI_TIM_0 */ 702 703#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ 704#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ 705 706/* Bit masks for ATAPI_MULTI_TIM_1 */ 707 708#define TKW 0xff /* Selects DIOW negated pulsewidth */ 709#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ 710 711/* Bit masks for ATAPI_MULTI_TIM_2 */ 712 713#define TH 0xff /* Selects DIOW data hold */ 714#define TEOC 0xff00 /* Selects end of cycle for DMA */ 715 716/* Bit masks for ATAPI_ULTRA_TIM_0 */ 717 718#define TACK 0xff /* Selects setup and hold times for TACK */ 719#define TENV 0xff00 /* Selects envelope time */ 720 721/* Bit masks for ATAPI_ULTRA_TIM_1 */ 722 723#define TDVS 0xff /* Selects data valid setup time */ 724#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ 725 726/* Bit masks for ATAPI_ULTRA_TIM_2 */ 727 728#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ 729#define TMLI 0xff00 /* Selects interlock time */ 730 731/* Bit masks for ATAPI_ULTRA_TIM_3 */ 732 733#define TZAH 0xff /* Selects minimum delay required for output */ 734#define READY_PAUSE 0xff00 /* Selects ready to pause */ 735 736/* Bit masks for TIMER_ENABLE1 */ 737 738#define TIMEN8 0x1 /* Timer 8 Enable */ 739#define TIMEN9 0x2 /* Timer 9 Enable */ 740#define TIMEN10 0x4 /* Timer 10 Enable */ 741 742/* Bit masks for TIMER_DISABLE1 */ 743 744#define TIMDIS8 0x1 /* Timer 8 Disable */ 745#define TIMDIS9 0x2 /* Timer 9 Disable */ 746#define TIMDIS10 0x4 /* Timer 10 Disable */ 747 748/* Bit masks for TIMER_STATUS1 */ 749 750#define TIMIL8 0x1 /* Timer 8 Interrupt */ 751#define TIMIL9 0x2 /* Timer 9 Interrupt */ 752#define TIMIL10 0x4 /* Timer 10 Interrupt */ 753#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ 754#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ 755#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ 756#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ 757#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ 758#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ 759 760/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ 761 762/* Bit masks for USB_FADDR */ 763 764#define FUNCTION_ADDRESS 0x7f /* Function address */ 765 766/* Bit masks for USB_POWER */ 767 768#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ 769#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ 770#define RESUME_MODE 0x4 /* DMA Mode */ 771#define RESET 0x8 /* Reset indicator */ 772#define HS_MODE 0x10 /* High Speed mode indicator */ 773#define HS_ENABLE 0x20 /* high Speed Enable */ 774#define SOFT_CONN 0x40 /* Soft connect */ 775#define ISO_UPDATE 0x80 /* Isochronous update */ 776 777/* Bit masks for USB_INTRTX */ 778 779#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ 780#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ 781#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ 782#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ 783#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ 784#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ 785#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ 786#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ 787 788/* Bit masks for USB_INTRRX */ 789 790#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ 791#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ 792#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ 793#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ 794#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ 795#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ 796#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ 797 798/* Bit masks for USB_INTRTXE */ 799 800#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ 801#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ 802#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ 803#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ 804#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ 805#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ 806#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ 807#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ 808 809/* Bit masks for USB_INTRRXE */ 810 811#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ 812#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ 813#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ 814#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ 815#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ 816#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ 817#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ 818 819/* Bit masks for USB_INTRUSB */ 820 821#define SUSPEND_B 0x1 /* Suspend indicator */ 822#define RESUME_B 0x2 /* Resume indicator */ 823#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ 824#define SOF_B 0x8 /* Start of frame */ 825#define CONN_B 0x10 /* Connection indicator */ 826#define DISCON_B 0x20 /* Disconnect indicator */ 827#define SESSION_REQ_B 0x40 /* Session Request */ 828#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ 829 830/* Bit masks for USB_INTRUSBE */ 831 832#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ 833#define RESUME_BE 0x2 /* Resume indicator int enable */ 834#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ 835#define SOF_BE 0x8 /* Start of frame int enable */ 836#define CONN_BE 0x10 /* Connection indicator int enable */ 837#define DISCON_BE 0x20 /* Disconnect indicator int enable */ 838#define SESSION_REQ_BE 0x40 /* Session Request int enable */ 839#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ 840 841/* Bit masks for USB_FRAME */ 842 843#define FRAME_NUMBER 0x7ff /* Frame number */ 844 845/* Bit masks for USB_INDEX */ 846 847#define SELECTED_ENDPOINT 0xf /* selected endpoint */ 848 849/* Bit masks for USB_GLOBAL_CTL */ 850 851#define GLOBAL_ENA 0x1 /* enables USB module */ 852#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ 853#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ 854#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ 855#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ 856#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ 857#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ 858#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ 859#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ 860#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ 861#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ 862#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ 863#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ 864#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ 865#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ 866 867/* Bit masks for USB_OTG_DEV_CTL */ 868 869#define SESSION 0x1 /* session indicator */ 870#define HOST_REQ 0x2 /* Host negotiation request */ 871#define HOST_MODE 0x4 /* indicates USBDRC is a host */ 872#define VBUS0 0x8 /* Vbus level indicator[0] */ 873#define VBUS1 0x10 /* Vbus level indicator[1] */ 874#define LSDEV 0x20 /* Low-speed indicator */ 875#define FSDEV 0x40 /* Full or High-speed indicator */ 876#define B_DEVICE 0x80 /* A' or 'B' device indicator */ 877 878/* Bit masks for USB_OTG_VBUS_IRQ */ 879 880#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ 881#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ 882#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ 883#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ 884#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ 885#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ 886 887/* Bit masks for USB_OTG_VBUS_MASK */ 888 889#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ 890#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ 891#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ 892#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ 893#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ 894#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ 895 896/* Bit masks for USB_CSR0 */ 897 898#define RXPKTRDY 0x1 /* data packet receive indicator */ 899#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ 900#define STALL_SENT 0x4 /* STALL handshake sent */ 901#define DATAEND 0x8 /* Data end indicator */ 902#define SETUPEND 0x10 /* Setup end */ 903#define SENDSTALL 0x20 /* Send STALL handshake */ 904#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ 905#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ 906#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ 907#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ 908#define SETUPPKT_H 0x8 /* send Setup token host mode */ 909#define ERROR_H 0x10 /* timeout error indicator host mode */ 910#define REQPKT_H 0x20 /* Request an IN transaction host mode */ 911#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ 912#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ 913 914/* Bit masks for USB_COUNT0 */ 915 916#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ 917 918/* Bit masks for USB_NAKLIMIT0 */ 919 920#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ 921 922/* Bit masks for USB_TX_MAX_PACKET */ 923 924#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ 925 926/* Bit masks for USB_RX_MAX_PACKET */ 927 928#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ 929 930/* Bit masks for USB_TXCSR */ 931 932#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ 933#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ 934#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ 935#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ 936#define STALL_SEND_T 0x10 /* issue a Stall handshake */ 937#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ 938#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ 939#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ 940#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ 941#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ 942#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ 943#define ISO_T 0x4000 /* enable Isochronous transfers */ 944#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ 945#define ERROR_TH 0x4 /* error condition host mode */ 946#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ 947#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ 948 949/* Bit masks for USB_TXCOUNT */ 950 951#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ 952 953/* Bit masks for USB_RXCSR */ 954 955#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ 956#define FIFO_FULL_R 0x2 /* FIFO not empty */ 957#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ 958#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ 959#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ 960#define STALL_SEND_R 0x20 /* issue a Stall handshake */ 961#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ 962#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ 963#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ 964#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ 965#define DISNYET_R 0x1000 /* disable Nyet handshakes */ 966#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ 967#define ISO_R 0x4000 /* enable Isochronous transfers */ 968#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ 969#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ 970#define REQPKT_RH 0x20 /* request an IN transaction host mode */ 971#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ 972#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ 973#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ 974#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ 975 976/* Bit masks for USB_RXCOUNT */ 977 978#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ 979 980/* Bit masks for USB_TXTYPE */ 981 982#define TARGET_EP_NO_T 0xf /* EP number */ 983#define PROTOCOL_T 0xc /* transfer type */ 984 985/* Bit masks for USB_TXINTERVAL */ 986 987#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ 988 989/* Bit masks for USB_RXTYPE */ 990 991#define TARGET_EP_NO_R 0xf /* EP number */ 992#define PROTOCOL_R 0xc /* transfer type */ 993 994/* Bit masks for USB_RXINTERVAL */ 995 996#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ 997 998/* Bit masks for USB_DMA_INTERRUPT */ 999 1000#define DMA0_INT 0x1 /* DMA0 pending interrupt */
1001#define DMA1_INT 0x2 /* DMA1 pending interrupt */ 1002#define DMA2_INT 0x4 /* DMA2 pending interrupt */ 1003#define DMA3_INT 0x8 /* DMA3 pending interrupt */ 1004#define DMA4_INT 0x10 /* DMA4 pending interrupt */ 1005#define DMA5_INT 0x20 /* DMA5 pending interrupt */ 1006#define DMA6_INT 0x40 /* DMA6 pending interrupt */ 1007#define DMA7_INT 0x80 /* DMA7 pending interrupt */ 1008 1009/* Bit masks for USB_DMAxCONTROL */ 1010 1011#define DMA_ENA 0x1 /* DMA enable */ 1012#define DIRECTION 0x2 /* direction of DMA transfer */ 1013#define MODE 0x4 /* DMA Bus error */ 1014#define INT_ENA 0x8 /* Interrupt enable */ 1015#define EPNUM 0xf0 /* EP number */ 1016#define BUSERROR 0x100 /* DMA Bus error */ 1017 1018/* Bit masks for USB_DMAxADDRHIGH */ 1019 1020#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ 1021 1022/* Bit masks for USB_DMAxADDRLOW */ 1023 1024#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ 1025 1026/* Bit masks for USB_DMAxCOUNTHIGH */ 1027 1028#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ 1029 1030/* Bit masks for USB_DMAxCOUNTLOW */ 1031 1032#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ 1033 1034#endif /* _DEF_BF547_H */ 1035