/*
 * I/O Processor (IOP) management
 * Written and (C) 1999 by Joshua M. Thompson (funaho@jurai.org)
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice and this list of conditions.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice and this list of conditions in the documentation and/or other
 *    materials provided with the distribution.
 */

/*
 * The IOP chips are used in the IIfx and some Quadras (900, 950) to manage
 * serial and ADB. They are actually a 6502 processor and some glue logic.
 *
 * 990429 (jmt) - Initial implementation, just enough to knock the SCC IOP
 *                into compatible mode so nobody has to fiddle with the
 *                Serial Switch control panel anymore.
 * 990603 (jmt) - Added code to grab the correct ISM IOP interrupt for OSS
 *                and non-OSS machines (at least I hope it's correct on a
 *                non-OSS machine -- someone with a Q900 or Q950 needs to
 *                check this.)
 * 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
 *                gone, IOP base addresses are now in an array and the
 *                globally-visible functions take an IOP number instead of an
 *                an actual base address.
 * 990610 (jmt) - Finished the message passing framework and it seems to work.
 *                Sending _definitely_ works; my adb-bus.c mods can send
 *                messages and receive the MSG_COMPLETED status back from the
 *                IOP. The trick now is figuring out the message formats.
 * 990611 (jmt) - More cleanups. Fixed problem where unclaimed messages on a
 *                receive channel were never properly acknowledged. Bracketed
 *                the remaining debug printk's with #ifdef's and disabled
 *                debugging. I can now type on the console.
 * 990612 (jmt) - Copyright notice added. Reworked the way replies are handled.
 *                It turns out that replies are placed back in the send buffer
 *                for that channel; messages on the receive channels are always
 *                unsolicited messages from the IOP (and our replies to them
 *                should go back in the receive channel.) Also added tracking
 *                of device names to the listener functions ala the interrupt
 *                handlers.
 * 990729 (jmt) - Added passing of pt_regs structure to IOP handlers. This is
 *                used by the new unified ADB driver.
 *
 * TODO:
 *
 * o Something should be periodically checking iop_alive() to make sure the
 *   IOP hasn't died.
 * o Some of the IOP manager routines need better error checking and
 *   return codes. Nothing major, just prettying up.
 */

/*
 * -----------------------
 * IOP Message Passing 101
 * -----------------------
 *
 * The host talks to the IOPs using a rather simple message-passing scheme via
 * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
 * channel is conneced to a specific software driver on the IOP. For example
 * on the SCC IOP there is one channel for each serial port. Each channel has
 * an incoming and and outgoing message queue with a depth of one.
 *
 * A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
 * MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the
 * buffer, set the state to MSG_NEW and signal the IOP by setting the IRQ flag
 * in the IOP control to 1. The IOP will move the state to MSG_RCVD when it
 * receives the message and then to MSG_COMPLETE when the message processing
 * has completed. It is the host's responsibility at that point to read the
 * reply back out of the send channel buffer and reset the channel state back
 * to MSG_IDLE.
 *
 * To receive message from the IOP the same procedure is used except the roles
 * are reversed. That is, the IOP puts message in the channel with a state of
 * MSG_NEW, and the host receives the message and move its state to MSG_RCVD
 * and then to MSG_COMPLETE when processing is completed and the reply (if any)
 * has been placed back in the receive channel. The IOP will then reset the
 * channel state to MSG_IDLE.
 *
 * Two sets of host interrupts are provided, INT0 and INT1. Both appear on one
 * interrupt level; they are distinguished by a pair of bits in the IOP status
 * register. The IOP will raise INT0 when one or more messages in the send
 * channels have gone to the MSG_COMPLETE state and it will raise INT1 when one
 * or more messages on the receive channels have gone to the MSG_NEW state.
 *
 * Since each channel handles only one message we have to implement a small
 * interrupt-driven queue on our end. Messages to be sent are placed on the
 * queue for sending and contain a pointer to an optional callback function.
 * The handler for a message is called when the message state goes to
 * MSG_COMPLETE.
 *
 * For receiving message we maintain a list of handler functions to call when
 * a message is received on that IOP/channel combination. The handlers are
 * called much like an interrupt handler and are passed a copy of the message
 * from the IOP. The message state will be in MSG_RCVD while the handler runs;
 * it is the handler's responsibility to call iop_complete_message() when
 * finished; this function moves the message state to MSG_COMPLETE and signals
 * the IOP. This two-step process is provided to allow the handler to defer
 * message processing to a bottom-half handler if the processing will take
 * a significant amount of time (handlers are called at interrupt time so they
 * should execute quickly.)
 */

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>

#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_iop.h>

/*#define DEBUG_IOP*/

/* Non-zero if the IOPs are present */

int iop_scc_present, iop_ism_present;

/* structure for tracking channel listeners */

struct listener {
        const char *devname;
        void (*handler)(struct iop_msg *);
};

/*
 * IOP structures for the two IOPs
 *
 * The SCC IOP controls both serial ports (A and B) as its two functions.
 * The ISM IOP controls the SWIM (floppy drive) and ADB.
 */

static volatile struct mac_iop *iop_base[NUM_IOPS];

/*
 * IOP message queues
 */

static struct iop_msg iop_msg_pool[NUM_IOP_MSGS];
static struct iop_msg *iop_send_queue[NUM_IOPS][NUM_IOP_CHAN];
static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN];

irqreturn_t iop_ism_irq(int, void *);

/*
 * Private access functions
 */

static __inline__ void iop_loadaddr(volatile struct mac_iop *iop, __u16 addr)
{
        iop->ram_addr_lo = addr;
        iop->ram_addr_hi = addr >> 8;
}

static __inline__ __u8 iop_readb(volatile struct mac_iop *iop, __u16 addr)
{
        iop->ram_addr_lo = addr;
        iop->ram_addr_hi = addr >> 8;
        return iop->ram_data;
}

static __inline__ void iop_writeb(volatile struct mac_iop *iop, __u16 addr, __u8 data)
{
        iop->ram_addr_lo = addr;
        iop->ram_addr_hi = addr >> 8;
        iop->ram_data = data;
}

static __inline__ void iop_stop(volatile struct mac_iop *iop)
{
        iop->status_ctrl &= ~IOP_RUN;
}

static __inline__ void iop_start(volatile struct mac_iop *iop)
{
        iop->status_ctrl = IOP_RUN | IOP_AUTOINC;
}

static __inline__ void iop_bypass(volatile struct mac_iop *iop)
{
        iop->status_ctrl |= IOP_BYPASS;
}

static __inline__ void iop_interrupt(volatile struct mac_iop *iop)
{
        iop->status_ctrl |= IOP_IRQ;
}

static int iop_alive(volatile struct mac_iop *iop)
{
        int retval;

        retval = (iop_readb(iop, IOP_ADDR_ALIVE) == 0xFF);
        iop_writeb(iop, IOP_ADDR_ALIVE, 0);
        return retval;
}

static struct iop_msg *iop_alloc_msg(void)
{
        int i;
        unsigned long flags;

        local_irq_save(flags);

        for (i = 0 ; i < NUM_IOP_MSGS ; i++) {
                if (iop_msg_pool[i].status == IOP_MSGSTATUS_UNUSED) {
                        iop_msg_pool[i].status = IOP_MSGSTATUS_WAITING;
                        local_irq_restore(flags);
                        return &iop_msg_pool[i];
                }
        }

        local_irq_restore(flags);
        return NULL;
}

static void iop_free_msg(struct iop_msg *msg)
{
        msg->status = IOP_MSGSTATUS_UNUSED;
}

/*
 * This is called by the startup code before anything else. Its purpose
 * is to find and initialize the IOPs early in the boot sequence, so that
 * the serial IOP can be placed into bypass mode _before_ we try to
 * initialize the serial console.
 */

void __init iop_preinit(void)
{
        if (macintosh_config->scc_type == MAC_SCC_IOP) {
                if (macintosh_config->ident == MAC_MODEL_IIFX) {
                        iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_IIFX;
                } else {
                        iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
                }
                iop_base[IOP_NUM_SCC]->status_ctrl = 0x87;
                iop_scc_present = 1;
        } else {
                iop_base[IOP_NUM_SCC] = NULL;
                iop_scc_present = 0;
        }
        if (macintosh_config->adb_type == MAC_ADB_IOP) {
                if (macintosh_config->ident == MAC_MODEL_IIFX) {
                        iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_IIFX;
                } else {
                        iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
                }
                iop_base[IOP_NUM_ISM]->status_ctrl = 0;
                iop_ism_present = 1;
        } else {
                iop_base[IOP_NUM_ISM] = NULL;
                iop_ism_present = 0;
        }
}

/*
 * Initialize the IOPs, if present.
 */

void __init iop_init(void)
{
        int i;

        if (iop_scc_present) {
                printk("IOP: detected SCC IOP at %p\n", iop_base[IOP_NUM_SCC]);
        }
        if (iop_ism_present) {
                printk("IOP: detected ISM IOP at %p\n", iop_base[IOP_NUM_ISM]);
                iop_start(iop_base[IOP_NUM_ISM]);
                iop_alive(iop_base[IOP_NUM_ISM]); /* clears the alive flag */
        }

        /* Make the whole pool available and empty the queues */

        for (i = 0 ; i < NUM_IOP_MSGS ; i++) {
                iop_msg_pool[i].status = IOP_MSGSTATUS_UNUSED;
        }

        for (i = 0 ; i < NUM_IOP_CHAN ; i++) {
                iop_send_queue[IOP_NUM_SCC][i] = NULL;
                iop_send_queue[IOP_NUM_ISM][i] = NULL;
                iop_listeners[IOP_NUM_SCC][i].devname = NULL;
                iop_listeners[IOP_NUM_SCC][i].handler = NULL;
                iop_listeners[IOP_NUM_ISM][i].devname = NULL;
                iop_listeners[IOP_NUM_ISM][i].handler = NULL;
        }
}

/*
 * Register the interrupt handler for the IOPs.
 * TODO: might be wrong for non-OSS machines. Anyone?
 */

void __init iop_register_interrupts(void)
{
        if (iop_ism_present) {
                if (macintosh_config->ident == MAC_MODEL_IIFX) {
                        if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0,
                                        "ISM IOP", (void *)IOP_NUM_ISM))
                                pr_err("Couldn't register ISM IOP interrupt\n");
                } else {
                        if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
                                        (void *)IOP_NUM_ISM))
                                pr_err("Couldn't register ISM IOP interrupt\n");
                }
                if (!iop_alive(iop_base[IOP_NUM_ISM])) {
                        printk("IOP: oh my god, they killed the ISM IOP!\n");
                } else {
                        printk("IOP: the ISM IOP seems to be alive.\n");
                }
        }
}

/*
 * Register or unregister a listener for a specific IOP and channel
 *
 * If the handler pointer is NULL the current listener (if any) is
 * unregistered. Otherwise the new listener is registered provided
 * there is no existing listener registered.
 */

int iop_listen(uint iop_num, uint chan,
                void (*handler)(struct iop_msg *),
                const char *devname)
{
        if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return -EINVAL;
        if (chan >= NUM_IOP_CHAN) return -EINVAL;
        if (iop_listeners[iop_num][chan].handler && handler) return -EINVAL;
        iop_listeners[iop_num][chan].devname = devname;
        iop_listeners[iop_num][chan].handler = handler;
        return 0;
}

/*
 * Complete reception of a message, which just means copying the reply
 * into the buffer, setting the channel state to MSG_COMPLETE and
 * notifying the IOP.
 */

void iop_complete_message(struct iop_msg *msg)
{
        int iop_num = msg->iop_num;
        int chan = msg->channel;
        int i,offset;

#ifdef DEBUG_IOP
        printk("iop_complete(%p): iop %d chan %d\n", msg, msg->iop_num, msg->channel);
#endif

        offset = IOP_ADDR_RECV_MSG + (msg->channel * IOP_MSG_LEN);

        for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
                iop_writeb(iop_base[iop_num], offset, msg->reply[i]);
        }

        iop_writeb(iop_base[iop_num],
                   IOP_ADDR_RECV_STATE + chan, IOP_MSG_COMPLETE);
        iop_interrupt(iop_base[msg->iop_num]);

        iop_free_msg(msg);
}

/*
 * Actually put a message into a send channel buffer
 */

static void iop_do_send(struct iop_msg *msg)
{
        volatile struct mac_iop *iop = iop_base[msg->iop_num];
        int i,offset;

        offset = IOP_ADDR_SEND_MSG + (msg->channel * IOP_MSG_LEN);

        for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
                iop_writeb(iop, offset, msg->message[i]);
        }

        iop_writeb(iop, IOP_ADDR_SEND_STATE + msg->channel, IOP_MSG_NEW);

        iop_interrupt(iop);
}

/*
 * Handle sending a message on a channel that
 * has gone into the IOP_MSG_COMPLETE state.
 */

static void iop_handle_send(uint iop_num, uint chan)
{
        volatile struct mac_iop *iop = iop_base[iop_num];
        struct iop_msg *msg,*msg2;
        int i,offset;

#ifdef DEBUG_IOP
        printk("iop_handle_send: iop %d channel %d\n", iop_num, chan);
#endif

        iop_writeb(iop, IOP_ADDR_SEND_STATE + chan, IOP_MSG_IDLE);

        if (!(msg = iop_send_queue[iop_num][chan])) return;

        msg->status = IOP_MSGSTATUS_COMPLETE;
        offset = IOP_ADDR_SEND_MSG + (chan * IOP_MSG_LEN);
        for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
                msg->reply[i] = iop_readb(iop, offset);
        }
        if (msg->handler) (*msg->handler)(msg);
        msg2 = msg;
        msg = msg->next;
        iop_free_msg(msg2);

        iop_send_queue[iop_num][chan] = msg;
        if (msg) iop_do_send(msg);
}

/*
 * Handle reception of a message on a channel that has
 * gone into the IOP_MSG_NEW state.
 */

static void iop_handle_recv(uint iop_num, uint chan)
{
        volatile struct mac_iop *iop = iop_base[iop_num];
        int i,offset;
        struct iop_msg *msg;

#ifdef DEBUG_IOP
        printk("iop_handle_recv: iop %d channel %d\n", iop_num, chan);
#endif

        msg = iop_alloc_msg();
        msg->iop_num = iop_num;
        msg->channel = chan;
        msg->status = IOP_MSGSTATUS_UNSOL;
        msg->handler = iop_listeners[iop_num][chan].handler;

        offset = IOP_ADDR_RECV_MSG + (chan * IOP_MSG_LEN);

        for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
                msg->message[i] = iop_readb(iop, offset);
        }

        iop_writeb(iop, IOP_ADDR_RECV_STATE + chan, IOP_MSG_RCVD);

        /* If there is a listener, call it now. Otherwise complete */
        /* the message ourselves to avoid possible stalls.         */

        if (msg->handler) {
                (*msg->handler)(msg);
        } else {
#ifdef DEBUG_IOP
                printk("iop_handle_recv: unclaimed message on iop %d channel %d\n", iop_num, chan);
                printk("iop_handle_recv:");
                for (i = 0 ; i < IOP_MSG_LEN ; i++) {
                        printk(" %02X", (uint) msg->message[i]);
                }
                printk("\n");
#endif
                iop_complete_message(msg);
        }
}

/*
 * Send a message
 *
 * The message is placed at the end of the send queue. Afterwards if the
 * channel is idle we force an immediate send of the next message in the
 * queue.
 */

int iop_send_message(uint iop_num, uint chan, void *privdata,
                      uint msg_len, __u8 *msg_data,
                      void (*handler)(struct iop_msg *))
{
        struct iop_msg *msg, *q;

        if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return -EINVAL;
        if (chan >= NUM_IOP_CHAN) return -EINVAL;
        if (msg_len > IOP_MSG_LEN) return -EINVAL;

        msg = iop_alloc_msg();
        if (!msg) return -ENOMEM;

        msg->next = NULL;
        msg->status = IOP_MSGSTATUS_WAITING;
        msg->iop_num = iop_num;
        msg->channel = chan;
        msg->caller_priv = privdata;
        memcpy(msg->message, msg_data, msg_len);
        msg->handler = handler;

        if (!(q = iop_send_queue[iop_num][chan])) {
                iop_send_queue[iop_num][chan] = msg;
        } else {
                while (q->next) q = q->next;
                q->next = msg;
        }

        if (iop_readb(iop_base[iop_num],
            IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE) {
                iop_do_send(msg);
        }

        return 0;
}

/*
 * Upload code to the shared RAM of an IOP.
 */

void iop_upload_code(uint iop_num, __u8 *code_start,
                     uint code_len, __u16 shared_ram_start)
{
        if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return;

        iop_loadaddr(iop_base[iop_num], shared_ram_start);

        while (code_len--) {
                iop_base[iop_num]->ram_data = *code_start++;
        }
}

/*
 * Download code from the shared RAM of an IOP.
 */

void iop_download_code(uint iop_num, __u8 *code_start,
                       uint code_len, __u16 shared_ram_start)
{
        if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return;

        iop_loadaddr(iop_base[iop_num], shared_ram_start);

        while (code_len--) {
                *code_start++ = iop_base[iop_num]->ram_data;
        }
}

/*
 * Compare the code in the shared RAM of an IOP with a copy in system memory
 * and return 0 on match or the first nonmatching system memory address on
 * failure.
 */

__u8 *iop_compare_code(uint iop_num, __u8 *code_start,
                       uint code_len, __u16 shared_ram_start)
{
        if ((iop_num >= NUM_IOPS) || !iop_base[iop_num]) return code_start;

        iop_loadaddr(iop_base[iop_num], shared_ram_start);

        while (code_len--) {
                if (*code_start != iop_base[iop_num]->ram_data) {
                        return code_start;
                }
                code_start++;
        }
        return (__u8 *) 0;
}

/*
 * Handle an ISM IOP interrupt
 */

irqreturn_t iop_ism_irq(int irq, void *dev_id)
{
        uint iop_num = (uint) dev_id;
        volatile struct mac_iop *iop = iop_base[iop_num];
        int i,state;

#ifdef DEBUG_IOP
        printk("iop_ism_irq: status = %02X\n", (uint) iop->status_ctrl);
#endif

        /* INT0 indicates a state change on an outgoing message channel */

        if (iop->status_ctrl & IOP_INT0) {
                iop->status_ctrl = IOP_INT0 | IOP_RUN | IOP_AUTOINC;
#ifdef DEBUG_IOP
                printk("iop_ism_irq: new status = %02X, send states",
                        (uint) iop->status_ctrl);
#endif
                for (i = 0 ; i < NUM_IOP_CHAN  ; i++) {
                        state = iop_readb(iop, IOP_ADDR_SEND_STATE + i);
#ifdef DEBUG_IOP
                        printk(" %02X", state);
#endif
                        if (state == IOP_MSG_COMPLETE) {
                                iop_handle_send(iop_num, i);
                        }
                }
#ifdef DEBUG_IOP
                printk("\n");
#endif
        }

        if (iop->status_ctrl & IOP_INT1) {      /* INT1 for incoming msgs */
                iop->status_ctrl = IOP_INT1 | IOP_RUN | IOP_AUTOINC;
#ifdef DEBUG_IOP
                printk("iop_ism_irq: new status = %02X, recv states",
                        (uint) iop->status_ctrl);
#endif
                for (i = 0 ; i < NUM_IOP_CHAN ; i++) {
                        state = iop_readb(iop, IOP_ADDR_RECV_STATE + i);
#ifdef DEBUG_IOP
                        printk(" %02X", state);
#endif
                        if (state == IOP_MSG_NEW) {
                                iop_handle_recv(iop_num, i);
                        }
                }
#ifdef DEBUG_IOP
                printk("\n");
#endif
        }
        return IRQ_HANDLED;
}