LXR linux/arch/powerpc/platforms/83xx/mpc836x

   1/*
   2 * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
   3 *
   4 * Author: Li Yang <LeoLi@freescale.com>
   5 *         Yin Olivia <Hong-hua.Yin@freescale.com>
   6 *
   7 * Description:
   8 * MPC8360E MDS board specific routines.
   9 *
  10 * Changelog:
  11 * Jun 21, 2006 Initial version
  12 *
  13 * This program is free software; you can redistribute it and/or modify it
  14 * under  the terms of  the GNU General  Public License as published by the
  15 * Free Software Foundation;  either version 2 of the  License, or (at your
  16 * option) any later version.
  17 */
  18
  19#include <linux/stddef.h>
  20#include <linux/kernel.h>
  21#include <linux/compiler.h>
  22#include <linux/init.h>
  23#include <linux/errno.h>
  24#include <linux/reboot.h>
  25#include <linux/pci.h>
  26#include <linux/kdev_t.h>
  27#include <linux/major.h>
  28#include <linux/console.h>
  29#include <linux/delay.h>
  30#include <linux/seq_file.h>
  31#include <linux/root_dev.h>
  32#include <linux/initrd.h>
  33#include <linux/of_platform.h>
  34#include <linux/of_device.h>
  35
  36#include <linux/atomic.h>
  37#include <asm/time.h>
  38#include <asm/io.h>
  39#include <asm/machdep.h>
  40#include <asm/ipic.h>
  41#include <asm/irq.h>
  42#include <asm/prom.h>
  43#include <asm/udbg.h>
  44#include <sysdev/fsl_soc.h>
  45#include <sysdev/fsl_pci.h>
  46#include <sysdev/simple_gpio.h>
  47#include <soc/fsl/qe/qe.h>
  48#include <soc/fsl/qe/qe_ic.h>
  49
  50#include "mpc83xx.h"
  51
  52#undef DEBUG
  53#ifdef DEBUG
  54#define DBG(fmt...) udbg_printf(fmt)
  55#else
  56#define DBG(fmt...)
  57#endif
  58
  59/* ************************************************************************
  60 *
  61 * Setup the architecture
  62 *
  63 */
  64static void __init mpc836x_mds_setup_arch(void)
  65{
  66        struct device_node *np;
  67        u8 __iomem *bcsr_regs = NULL;
  68
  69        if (ppc_md.progress)
  70                ppc_md.progress("mpc836x_mds_setup_arch()", 0);
  71
  72        /* Map BCSR area */
  73        np = of_find_node_by_name(NULL, "bcsr");
  74        if (np) {
  75                struct resource res;
  76
  77                of_address_to_resource(np, 0, &res);
  78                bcsr_regs = ioremap(res.start, resource_size(&res));
  79                of_node_put(np);
  80        }
  81
  82        mpc83xx_setup_pci();
  83
  84#ifdef CONFIG_QUICC_ENGINE
  85        if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
  86                par_io_init(np);
  87                of_node_put(np);
  88
  89                for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
  90                        par_io_of_config(np);
  91#ifdef CONFIG_QE_USB
  92                /* Must fixup Par IO before QE GPIO chips are registered. */
  93                par_io_config_pin(1,  2, 1, 0, 3, 0); /* USBOE  */
  94                par_io_config_pin(1,  3, 1, 0, 3, 0); /* USBTP  */
  95                par_io_config_pin(1,  8, 1, 0, 1, 0); /* USBTN  */
  96                par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
  97                par_io_config_pin(1,  9, 2, 1, 3, 0); /* USBRP  */
  98                par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN  */
  99                par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21  */
 100#endif /* CONFIG_QE_USB */
 101        }
 102
 103        if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 104                        != NULL){
 105                uint svid;
 106
 107                /* Reset the Ethernet PHY */
 108#define BCSR9_GETHRST 0x20
 109                clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
 110                udelay(1000);
 111                setbits8(&bcsr_regs[9], BCSR9_GETHRST);
 112
 113                /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
 114                svid = mfspr(SPRN_SVR);
 115                if (svid == 0x80480021) {
 116                        void __iomem *immap;
 117
 118                        immap = ioremap(get_immrbase() + 0x14a8, 8);
 119
 120                        /*
 121                         * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
 122                         * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
 123                         */
 124                        setbits32(immap, 0x0c003000);
 125
 126                        /*
 127                         * IMMR + 0x14AC[20:27] = 10101010
 128                         * (data delay for both UCC's)
 129                         */
 130                        clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
 131
 132                        iounmap(immap);
 133                }
 134
 135                iounmap(bcsr_regs);
 136                of_node_put(np);
 137        }
 138#endif                          /* CONFIG_QUICC_ENGINE */
 139}
 140
 141machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
 142
 143#ifdef CONFIG_QE_USB
 144static int __init mpc836x_usb_cfg(void)
 145{
 146        u8 __iomem *bcsr;
 147        struct device_node *np;
 148        const char *mode;
 149        int ret = 0;
 150
 151        np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
 152        if (!np)
 153                return -ENODEV;
 154
 155        bcsr = of_iomap(np, 0);
 156        of_node_put(np);
 157        if (!bcsr)
 158                return -ENOMEM;
 159
 160        np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
 161        if (!np) {
 162                ret = -ENODEV;
 163                goto err;
 164        }
 165
 166#define BCSR8_TSEC1M_MASK       (0x3 << 6)
 167#define BCSR8_TSEC1M_RGMII      (0x0 << 6)
 168#define BCSR8_TSEC2M_MASK       (0x3 << 4)
 169#define BCSR8_TSEC2M_RGMII      (0x0 << 4)
 170        /*
 171         * Default is GMII (2), but we should set it to RGMII (0) if we use
 172         * USB (Eth PHY is in RGMII mode anyway).
 173         */
 174        clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
 175                               BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
 176
 177#define BCSR13_USBMASK  0x0f
 178#define BCSR13_nUSBEN   0x08 /* 1 - Disable, 0 - Enable                 */
 179#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low                       */
 180#define BCSR13_USBMODE  0x02 /* 1 - Host, 0 - Function                  */
 181#define BCSR13_nUSBVCC  0x01 /* 1 - gets VBUS, 0 - supplies VBUS        */
 182
 183        clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
 184
 185        mode = of_get_property(np, "mode", NULL);
 186        if (mode && !strcmp(mode, "peripheral")) {
 187                setbits8(&bcsr[13], BCSR13_nUSBVCC);
 188                qe_usb_clock_set(QE_CLK21, 48000000);
 189        } else {
 190                setbits8(&bcsr[13], BCSR13_USBMODE);
 191                /*
 192                 * The BCSR GPIOs are used to control power and
 193                 * speed of the USB transceiver. This is needed for
 194                 * the USB Host only.
 195                 */
 196                simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
 197        }
 198
 199        of_node_put(np);
 200err:
 201        iounmap(bcsr);
 202        return ret;
 203}
 204machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
 205#endif /* CONFIG_QE_USB */
 206
 207/*
 208 * Called very early, MMU is off, device-tree isn't unflattened
 209 */
 210static int __init mpc836x_mds_probe(void)
 211{
 212        unsigned long root = of_get_flat_dt_root();
 213
 214        return of_flat_dt_is_compatible(root, "MPC836xMDS");
 215}
 216
 217define_machine(mpc836x_mds) {
 218        .name           = "MPC836x MDS",
 219        .probe          = mpc836x_mds_probe,
 220        .setup_arch     = mpc836x_mds_setup_arch,
 221        .init_IRQ       = mpc83xx_ipic_and_qe_init_IRQ,
 222        .get_irq        = ipic_get_irq,
 223        .restart        = mpc83xx_restart,
 224        .time_init      = mpc83xx_time_init,
 225        .calibrate_decr = generic_calibrate_decr,
 226        .progress       = udbg_progress,
 227};
 228