linux/arch/powerpc/platforms/powermac/feature.c
<<
>>
Prefs
   1/*
   2 *  Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
   3 *                          Ben. Herrenschmidt (benh@kernel.crashing.org)
   4 *
   5 *  This program is free software; you can redistribute it and/or
   6 *  modify it under the terms of the GNU General Public License
   7 *  as published by the Free Software Foundation; either version
   8 *  2 of the License, or (at your option) any later version.
   9 *
  10 *  TODO:
  11 *
  12 *   - Replace mdelay with some schedule loop if possible
  13 *   - Shorten some obfuscated delays on some routines (like modem
  14 *     power)
  15 *   - Refcount some clocks (see darwin)
  16 *   - Split split split...
  17 *
  18 */
  19#include <linux/types.h>
  20#include <linux/init.h>
  21#include <linux/delay.h>
  22#include <linux/kernel.h>
  23#include <linux/sched.h>
  24#include <linux/of.h>
  25#include <linux/of_address.h>
  26#include <linux/spinlock.h>
  27#include <linux/adb.h>
  28#include <linux/pmu.h>
  29#include <linux/ioport.h>
  30#include <linux/export.h>
  31#include <linux/pci.h>
  32#include <asm/sections.h>
  33#include <asm/errno.h>
  34#include <asm/ohare.h>
  35#include <asm/heathrow.h>
  36#include <asm/keylargo.h>
  37#include <asm/uninorth.h>
  38#include <asm/io.h>
  39#include <asm/prom.h>
  40#include <asm/machdep.h>
  41#include <asm/pmac_feature.h>
  42#include <asm/dbdma.h>
  43#include <asm/pci-bridge.h>
  44#include <asm/pmac_low_i2c.h>
  45
  46#undef DEBUG_FEATURE
  47
  48#ifdef DEBUG_FEATURE
  49#define DBG(fmt...) printk(KERN_DEBUG fmt)
  50#else
  51#define DBG(fmt...)
  52#endif
  53
  54#ifdef CONFIG_6xx
  55extern int powersave_lowspeed;
  56#endif
  57
  58extern int powersave_nap;
  59extern struct device_node *k2_skiplist[2];
  60
  61/*
  62 * We use a single global lock to protect accesses. Each driver has
  63 * to take care of its own locking
  64 */
  65DEFINE_RAW_SPINLOCK(feature_lock);
  66
  67#define LOCK(flags)     raw_spin_lock_irqsave(&feature_lock, flags);
  68#define UNLOCK(flags)   raw_spin_unlock_irqrestore(&feature_lock, flags);
  69
  70
  71/*
  72 * Instance of some macio stuffs
  73 */
  74struct macio_chip macio_chips[MAX_MACIO_CHIPS];
  75
  76struct macio_chip *macio_find(struct device_node *child, int type)
  77{
  78        while(child) {
  79                int     i;
  80
  81                for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
  82                        if (child == macio_chips[i].of_node &&
  83                            (!type || macio_chips[i].type == type))
  84                                return &macio_chips[i];
  85                child = child->parent;
  86        }
  87        return NULL;
  88}
  89EXPORT_SYMBOL_GPL(macio_find);
  90
  91static const char *macio_names[] =
  92{
  93        "Unknown",
  94        "Grand Central",
  95        "OHare",
  96        "OHareII",
  97        "Heathrow",
  98        "Gatwick",
  99        "Paddington",
 100        "Keylargo",
 101        "Pangea",
 102        "Intrepid",
 103        "K2",
 104        "Shasta",
 105};
 106
 107
 108struct device_node *uninorth_node;
 109u32 __iomem *uninorth_base;
 110
 111static u32 uninorth_rev;
 112static int uninorth_maj;
 113static void __iomem *u3_ht_base;
 114
 115/*
 116 * For each motherboard family, we have a table of functions pointers
 117 * that handle the various features.
 118 */
 119
 120typedef long (*feature_call)(struct device_node *node, long param, long value);
 121
 122struct feature_table_entry {
 123        unsigned int    selector;
 124        feature_call    function;
 125};
 126
 127struct pmac_mb_def
 128{
 129        const char*                     model_string;
 130        const char*                     model_name;
 131        int                             model_id;
 132        struct feature_table_entry*     features;
 133        unsigned long                   board_flags;
 134};
 135static struct pmac_mb_def pmac_mb;
 136
 137/*
 138 * Here are the chip specific feature functions
 139 */
 140
 141static inline int simple_feature_tweak(struct device_node *node, int type,
 142                                       int reg, u32 mask, int value)
 143{
 144        struct macio_chip*      macio;
 145        unsigned long           flags;
 146
 147        macio = macio_find(node, type);
 148        if (!macio)
 149                return -ENODEV;
 150        LOCK(flags);
 151        if (value)
 152                MACIO_BIS(reg, mask);
 153        else
 154                MACIO_BIC(reg, mask);
 155        (void)MACIO_IN32(reg);
 156        UNLOCK(flags);
 157
 158        return 0;
 159}
 160
 161#ifndef CONFIG_PPC64
 162
 163static long ohare_htw_scc_enable(struct device_node *node, long param,
 164                                 long value)
 165{
 166        struct macio_chip*      macio;
 167        unsigned long           chan_mask;
 168        unsigned long           fcr;
 169        unsigned long           flags;
 170        int                     htw, trans;
 171        unsigned long           rmask;
 172
 173        macio = macio_find(node, 0);
 174        if (!macio)
 175                return -ENODEV;
 176        if (!strcmp(node->name, "ch-a"))
 177                chan_mask = MACIO_FLAG_SCCA_ON;
 178        else if (!strcmp(node->name, "ch-b"))
 179                chan_mask = MACIO_FLAG_SCCB_ON;
 180        else
 181                return -ENODEV;
 182
 183        htw = (macio->type == macio_heathrow || macio->type == macio_paddington
 184                || macio->type == macio_gatwick);
 185        /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
 186        trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
 187                 pmac_mb.model_id != PMAC_TYPE_YIKES);
 188        if (value) {
 189#ifdef CONFIG_ADB_PMU
 190                if ((param & 0xfff) == PMAC_SCC_IRDA)
 191                        pmu_enable_irled(1);
 192#endif /* CONFIG_ADB_PMU */
 193                LOCK(flags);
 194                fcr = MACIO_IN32(OHARE_FCR);
 195                /* Check if scc cell need enabling */
 196                if (!(fcr & OH_SCC_ENABLE)) {
 197                        fcr |= OH_SCC_ENABLE;
 198                        if (htw) {
 199                                /* Side effect: this will also power up the
 200                                 * modem, but it's too messy to figure out on which
 201                                 * ports this controls the transceiver and on which
 202                                 * it controls the modem
 203                                 */
 204                                if (trans)
 205                                        fcr &= ~HRW_SCC_TRANS_EN_N;
 206                                MACIO_OUT32(OHARE_FCR, fcr);
 207                                fcr |= (rmask = HRW_RESET_SCC);
 208                                MACIO_OUT32(OHARE_FCR, fcr);
 209                        } else {
 210                                fcr |= (rmask = OH_SCC_RESET);
 211                                MACIO_OUT32(OHARE_FCR, fcr);
 212                        }
 213                        UNLOCK(flags);
 214                        (void)MACIO_IN32(OHARE_FCR);
 215                        mdelay(15);
 216                        LOCK(flags);
 217                        fcr &= ~rmask;
 218                        MACIO_OUT32(OHARE_FCR, fcr);
 219                }
 220                if (chan_mask & MACIO_FLAG_SCCA_ON)
 221                        fcr |= OH_SCCA_IO;
 222                if (chan_mask & MACIO_FLAG_SCCB_ON)
 223                        fcr |= OH_SCCB_IO;
 224                MACIO_OUT32(OHARE_FCR, fcr);
 225                macio->flags |= chan_mask;
 226                UNLOCK(flags);
 227                if (param & PMAC_SCC_FLAG_XMON)
 228                        macio->flags |= MACIO_FLAG_SCC_LOCKED;
 229        } else {
 230                if (macio->flags & MACIO_FLAG_SCC_LOCKED)
 231                        return -EPERM;
 232                LOCK(flags);
 233                fcr = MACIO_IN32(OHARE_FCR);
 234                if (chan_mask & MACIO_FLAG_SCCA_ON)
 235                        fcr &= ~OH_SCCA_IO;
 236                if (chan_mask & MACIO_FLAG_SCCB_ON)
 237                        fcr &= ~OH_SCCB_IO;
 238                MACIO_OUT32(OHARE_FCR, fcr);
 239                if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
 240                        fcr &= ~OH_SCC_ENABLE;
 241                        if (htw && trans)
 242                                fcr |= HRW_SCC_TRANS_EN_N;
 243                        MACIO_OUT32(OHARE_FCR, fcr);
 244                }
 245                macio->flags &= ~(chan_mask);
 246                UNLOCK(flags);
 247                mdelay(10);
 248#ifdef CONFIG_ADB_PMU
 249                if ((param & 0xfff) == PMAC_SCC_IRDA)
 250                        pmu_enable_irled(0);
 251#endif /* CONFIG_ADB_PMU */
 252        }
 253        return 0;
 254}
 255
 256static long ohare_floppy_enable(struct device_node *node, long param,
 257                                long value)
 258{
 259        return simple_feature_tweak(node, macio_ohare,
 260                OHARE_FCR, OH_FLOPPY_ENABLE, value);
 261}
 262
 263static long ohare_mesh_enable(struct device_node *node, long param, long value)
 264{
 265        return simple_feature_tweak(node, macio_ohare,
 266                OHARE_FCR, OH_MESH_ENABLE, value);
 267}
 268
 269static long ohare_ide_enable(struct device_node *node, long param, long value)
 270{
 271        switch(param) {
 272        case 0:
 273                /* For some reason, setting the bit in set_initial_features()
 274                 * doesn't stick. I'm still investigating... --BenH.
 275                 */
 276                if (value)
 277                        simple_feature_tweak(node, macio_ohare,
 278                                OHARE_FCR, OH_IOBUS_ENABLE, 1);
 279                return simple_feature_tweak(node, macio_ohare,
 280                        OHARE_FCR, OH_IDE0_ENABLE, value);
 281        case 1:
 282                return simple_feature_tweak(node, macio_ohare,
 283                        OHARE_FCR, OH_BAY_IDE_ENABLE, value);
 284        default:
 285                return -ENODEV;
 286        }
 287}
 288
 289static long ohare_ide_reset(struct device_node *node, long param, long value)
 290{
 291        switch(param) {
 292        case 0:
 293                return simple_feature_tweak(node, macio_ohare,
 294                        OHARE_FCR, OH_IDE0_RESET_N, !value);
 295        case 1:
 296                return simple_feature_tweak(node, macio_ohare,
 297                        OHARE_FCR, OH_IDE1_RESET_N, !value);
 298        default:
 299                return -ENODEV;
 300        }
 301}
 302
 303static long ohare_sleep_state(struct device_node *node, long param, long value)
 304{
 305        struct macio_chip*      macio = &macio_chips[0];
 306
 307        if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
 308                return -EPERM;
 309        if (value == 1) {
 310                MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
 311        } else if (value == 0) {
 312                MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
 313        }
 314
 315        return 0;
 316}
 317
 318static long heathrow_modem_enable(struct device_node *node, long param,
 319                                  long value)
 320{
 321        struct macio_chip*      macio;
 322        u8                      gpio;
 323        unsigned long           flags;
 324
 325        macio = macio_find(node, macio_unknown);
 326        if (!macio)
 327                return -ENODEV;
 328        gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
 329        if (!value) {
 330                LOCK(flags);
 331                MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
 332                UNLOCK(flags);
 333                (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 334                mdelay(250);
 335        }
 336        if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
 337            pmac_mb.model_id != PMAC_TYPE_YIKES) {
 338                LOCK(flags);
 339                if (value)
 340                        MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 341                else
 342                        MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 343                UNLOCK(flags);
 344                (void)MACIO_IN32(HEATHROW_FCR);
 345                mdelay(250);
 346        }
 347        if (value) {
 348                LOCK(flags);
 349                MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
 350                (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 351                UNLOCK(flags); mdelay(250); LOCK(flags);
 352                MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
 353                (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 354                UNLOCK(flags); mdelay(250); LOCK(flags);
 355                MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
 356                (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
 357                UNLOCK(flags); mdelay(250);
 358        }
 359        return 0;
 360}
 361
 362static long heathrow_floppy_enable(struct device_node *node, long param,
 363                                   long value)
 364{
 365        return simple_feature_tweak(node, macio_unknown,
 366                HEATHROW_FCR,
 367                HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
 368                value);
 369}
 370
 371static long heathrow_mesh_enable(struct device_node *node, long param,
 372                                 long value)
 373{
 374        struct macio_chip*      macio;
 375        unsigned long           flags;
 376
 377        macio = macio_find(node, macio_unknown);
 378        if (!macio)
 379                return -ENODEV;
 380        LOCK(flags);
 381        /* Set clear mesh cell enable */
 382        if (value)
 383                MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
 384        else
 385                MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
 386        (void)MACIO_IN32(HEATHROW_FCR);
 387        udelay(10);
 388        /* Set/Clear termination power */
 389        if (value)
 390                MACIO_BIC(HEATHROW_MBCR, 0x04000000);
 391        else
 392                MACIO_BIS(HEATHROW_MBCR, 0x04000000);
 393        (void)MACIO_IN32(HEATHROW_MBCR);
 394        udelay(10);
 395        UNLOCK(flags);
 396
 397        return 0;
 398}
 399
 400static long heathrow_ide_enable(struct device_node *node, long param,
 401                                long value)
 402{
 403        switch(param) {
 404        case 0:
 405                return simple_feature_tweak(node, macio_unknown,
 406                        HEATHROW_FCR, HRW_IDE0_ENABLE, value);
 407        case 1:
 408                return simple_feature_tweak(node, macio_unknown,
 409                        HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
 410        default:
 411                return -ENODEV;
 412        }
 413}
 414
 415static long heathrow_ide_reset(struct device_node *node, long param,
 416                               long value)
 417{
 418        switch(param) {
 419        case 0:
 420                return simple_feature_tweak(node, macio_unknown,
 421                        HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
 422        case 1:
 423                return simple_feature_tweak(node, macio_unknown,
 424                        HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
 425        default:
 426                return -ENODEV;
 427        }
 428}
 429
 430static long heathrow_bmac_enable(struct device_node *node, long param,
 431                                 long value)
 432{
 433        struct macio_chip*      macio;
 434        unsigned long           flags;
 435
 436        macio = macio_find(node, 0);
 437        if (!macio)
 438                return -ENODEV;
 439        if (value) {
 440                LOCK(flags);
 441                MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
 442                MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
 443                UNLOCK(flags);
 444                (void)MACIO_IN32(HEATHROW_FCR);
 445                mdelay(10);
 446                LOCK(flags);
 447                MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
 448                UNLOCK(flags);
 449                (void)MACIO_IN32(HEATHROW_FCR);
 450                mdelay(10);
 451        } else {
 452                LOCK(flags);
 453                MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
 454                UNLOCK(flags);
 455        }
 456        return 0;
 457}
 458
 459static long heathrow_sound_enable(struct device_node *node, long param,
 460                                  long value)
 461{
 462        struct macio_chip*      macio;
 463        unsigned long           flags;
 464
 465        /* B&W G3 and Yikes don't support that properly (the
 466         * sound appear to never come back after being shut down).
 467         */
 468        if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
 469            pmac_mb.model_id == PMAC_TYPE_YIKES)
 470                return 0;
 471
 472        macio = macio_find(node, 0);
 473        if (!macio)
 474                return -ENODEV;
 475        if (value) {
 476                LOCK(flags);
 477                MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 478                MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
 479                UNLOCK(flags);
 480                (void)MACIO_IN32(HEATHROW_FCR);
 481        } else {
 482                LOCK(flags);
 483                MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
 484                MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 485                UNLOCK(flags);
 486        }
 487        return 0;
 488}
 489
 490static u32 save_fcr[6];
 491static u32 save_mbcr;
 492static struct dbdma_regs save_dbdma[13];
 493static struct dbdma_regs save_alt_dbdma[13];
 494
 495static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
 496{
 497        int i;
 498
 499        /* Save state & config of DBDMA channels */
 500        for (i = 0; i < 13; i++) {
 501                volatile struct dbdma_regs __iomem * chan = (void __iomem *)
 502                        (macio->base + ((0x8000+i*0x100)>>2));
 503                save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
 504                save[i].cmdptr = in_le32(&chan->cmdptr);
 505                save[i].intr_sel = in_le32(&chan->intr_sel);
 506                save[i].br_sel = in_le32(&chan->br_sel);
 507                save[i].wait_sel = in_le32(&chan->wait_sel);
 508        }
 509}
 510
 511static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
 512{
 513        int i;
 514
 515        /* Save state & config of DBDMA channels */
 516        for (i = 0; i < 13; i++) {
 517                volatile struct dbdma_regs __iomem * chan = (void __iomem *)
 518                        (macio->base + ((0x8000+i*0x100)>>2));
 519                out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
 520                while (in_le32(&chan->status) & ACTIVE)
 521                        mb();
 522                out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
 523                out_le32(&chan->cmdptr, save[i].cmdptr);
 524                out_le32(&chan->intr_sel, save[i].intr_sel);
 525                out_le32(&chan->br_sel, save[i].br_sel);
 526                out_le32(&chan->wait_sel, save[i].wait_sel);
 527        }
 528}
 529
 530static void heathrow_sleep(struct macio_chip *macio, int secondary)
 531{
 532        if (secondary) {
 533                dbdma_save(macio, save_alt_dbdma);
 534                save_fcr[2] = MACIO_IN32(0x38);
 535                save_fcr[3] = MACIO_IN32(0x3c);
 536        } else {
 537                dbdma_save(macio, save_dbdma);
 538                save_fcr[0] = MACIO_IN32(0x38);
 539                save_fcr[1] = MACIO_IN32(0x3c);
 540                save_mbcr = MACIO_IN32(0x34);
 541                /* Make sure sound is shut down */
 542                MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
 543                MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
 544                /* This seems to be necessary as well or the fan
 545                 * keeps coming up and battery drains fast */
 546                MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
 547                MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
 548                /* Make sure eth is down even if module or sleep
 549                 * won't work properly */
 550                MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
 551        }
 552        /* Make sure modem is shut down */
 553        MACIO_OUT8(HRW_GPIO_MODEM_RESET,
 554                MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
 555        MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
 556        MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
 557
 558        /* Let things settle */
 559        (void)MACIO_IN32(HEATHROW_FCR);
 560}
 561
 562static void heathrow_wakeup(struct macio_chip *macio, int secondary)
 563{
 564        if (secondary) {
 565                MACIO_OUT32(0x38, save_fcr[2]);
 566                (void)MACIO_IN32(0x38);
 567                mdelay(1);
 568                MACIO_OUT32(0x3c, save_fcr[3]);
 569                (void)MACIO_IN32(0x38);
 570                mdelay(10);
 571                dbdma_restore(macio, save_alt_dbdma);
 572        } else {
 573                MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
 574                (void)MACIO_IN32(0x38);
 575                mdelay(1);
 576                MACIO_OUT32(0x3c, save_fcr[1]);
 577                (void)MACIO_IN32(0x38);
 578                mdelay(1);
 579                MACIO_OUT32(0x34, save_mbcr);
 580                (void)MACIO_IN32(0x38);
 581                mdelay(10);
 582                dbdma_restore(macio, save_dbdma);
 583        }
 584}
 585
 586static long heathrow_sleep_state(struct device_node *node, long param,
 587                                 long value)
 588{
 589        if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
 590                return -EPERM;
 591        if (value == 1) {
 592                if (macio_chips[1].type == macio_gatwick)
 593                        heathrow_sleep(&macio_chips[0], 1);
 594                heathrow_sleep(&macio_chips[0], 0);
 595        } else if (value == 0) {
 596                heathrow_wakeup(&macio_chips[0], 0);
 597                if (macio_chips[1].type == macio_gatwick)
 598                        heathrow_wakeup(&macio_chips[0], 1);
 599        }
 600        return 0;
 601}
 602
 603static long core99_scc_enable(struct device_node *node, long param, long value)
 604{
 605        struct macio_chip*      macio;
 606        unsigned long           flags;
 607        unsigned long           chan_mask;
 608        u32                     fcr;
 609
 610        macio = macio_find(node, 0);
 611        if (!macio)
 612                return -ENODEV;
 613        if (!strcmp(node->name, "ch-a"))
 614                chan_mask = MACIO_FLAG_SCCA_ON;
 615        else if (!strcmp(node->name, "ch-b"))
 616                chan_mask = MACIO_FLAG_SCCB_ON;
 617        else
 618                return -ENODEV;
 619
 620        if (value) {
 621                int need_reset_scc = 0;
 622                int need_reset_irda = 0;
 623
 624                LOCK(flags);
 625                fcr = MACIO_IN32(KEYLARGO_FCR0);
 626                /* Check if scc cell need enabling */
 627                if (!(fcr & KL0_SCC_CELL_ENABLE)) {
 628                        fcr |= KL0_SCC_CELL_ENABLE;
 629                        need_reset_scc = 1;
 630                }
 631                if (chan_mask & MACIO_FLAG_SCCA_ON) {
 632                        fcr |= KL0_SCCA_ENABLE;
 633                        /* Don't enable line drivers for I2S modem */
 634                        if ((param & 0xfff) == PMAC_SCC_I2S1)
 635                                fcr &= ~KL0_SCC_A_INTF_ENABLE;
 636                        else
 637                                fcr |= KL0_SCC_A_INTF_ENABLE;
 638                }
 639                if (chan_mask & MACIO_FLAG_SCCB_ON) {
 640                        fcr |= KL0_SCCB_ENABLE;
 641                        /* Perform irda specific inits */
 642                        if ((param & 0xfff) == PMAC_SCC_IRDA) {
 643                                fcr &= ~KL0_SCC_B_INTF_ENABLE;
 644                                fcr |= KL0_IRDA_ENABLE;
 645                                fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
 646                                fcr |= KL0_IRDA_SOURCE1_SEL;
 647                                fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
 648                                fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
 649                                need_reset_irda = 1;
 650                        } else
 651                                fcr |= KL0_SCC_B_INTF_ENABLE;
 652                }
 653                MACIO_OUT32(KEYLARGO_FCR0, fcr);
 654                macio->flags |= chan_mask;
 655                if (need_reset_scc)  {
 656                        MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
 657                        (void)MACIO_IN32(KEYLARGO_FCR0);
 658                        UNLOCK(flags);
 659                        mdelay(15);
 660                        LOCK(flags);
 661                        MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
 662                }
 663                if (need_reset_irda)  {
 664                        MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
 665                        (void)MACIO_IN32(KEYLARGO_FCR0);
 666                        UNLOCK(flags);
 667                        mdelay(15);
 668                        LOCK(flags);
 669                        MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
 670                }
 671                UNLOCK(flags);
 672                if (param & PMAC_SCC_FLAG_XMON)
 673                        macio->flags |= MACIO_FLAG_SCC_LOCKED;
 674        } else {
 675                if (macio->flags & MACIO_FLAG_SCC_LOCKED)
 676                        return -EPERM;
 677                LOCK(flags);
 678                fcr = MACIO_IN32(KEYLARGO_FCR0);
 679                if (chan_mask & MACIO_FLAG_SCCA_ON)
 680                        fcr &= ~KL0_SCCA_ENABLE;
 681                if (chan_mask & MACIO_FLAG_SCCB_ON) {
 682                        fcr &= ~KL0_SCCB_ENABLE;
 683                        /* Perform irda specific clears */
 684                        if ((param & 0xfff) == PMAC_SCC_IRDA) {
 685                                fcr &= ~KL0_IRDA_ENABLE;
 686                                fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
 687                                fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
 688                                fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
 689                        }
 690                }
 691                MACIO_OUT32(KEYLARGO_FCR0, fcr);
 692                if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
 693                        fcr &= ~KL0_SCC_CELL_ENABLE;
 694                        MACIO_OUT32(KEYLARGO_FCR0, fcr);
 695                }
 696                macio->flags &= ~(chan_mask);
 697                UNLOCK(flags);
 698                mdelay(10);
 699        }
 700        return 0;
 701}
 702
 703static long
 704core99_modem_enable(struct device_node *node, long param, long value)
 705{
 706        struct macio_chip*      macio;
 707        u8                      gpio;
 708        unsigned long           flags;
 709
 710        /* Hack for internal USB modem */
 711        if (node == NULL) {
 712                if (macio_chips[0].type != macio_keylargo)
 713                        return -ENODEV;
 714                node = macio_chips[0].of_node;
 715        }
 716        macio = macio_find(node, 0);
 717        if (!macio)
 718                return -ENODEV;
 719        gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
 720        gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
 721        gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
 722
 723        if (!value) {
 724                LOCK(flags);
 725                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 726                UNLOCK(flags);
 727                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 728                mdelay(250);
 729        }
 730        LOCK(flags);
 731        if (value) {
 732                MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
 733                UNLOCK(flags);
 734                (void)MACIO_IN32(KEYLARGO_FCR2);
 735                mdelay(250);
 736        } else {
 737                MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
 738                UNLOCK(flags);
 739        }
 740        if (value) {
 741                LOCK(flags);
 742                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 743                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 744                UNLOCK(flags); mdelay(250); LOCK(flags);
 745                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 746                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 747                UNLOCK(flags); mdelay(250); LOCK(flags);
 748                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 749                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 750                UNLOCK(flags); mdelay(250);
 751        }
 752        return 0;
 753}
 754
 755static long
 756pangea_modem_enable(struct device_node *node, long param, long value)
 757{
 758        struct macio_chip*      macio;
 759        u8                      gpio;
 760        unsigned long           flags;
 761
 762        /* Hack for internal USB modem */
 763        if (node == NULL) {
 764                if (macio_chips[0].type != macio_pangea &&
 765                    macio_chips[0].type != macio_intrepid)
 766                        return -ENODEV;
 767                node = macio_chips[0].of_node;
 768        }
 769        macio = macio_find(node, 0);
 770        if (!macio)
 771                return -ENODEV;
 772        gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
 773        gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
 774        gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
 775
 776        if (!value) {
 777                LOCK(flags);
 778                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 779                UNLOCK(flags);
 780                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 781                mdelay(250);
 782        }
 783        LOCK(flags);
 784        if (value) {
 785                MACIO_OUT8(KL_GPIO_MODEM_POWER,
 786                        KEYLARGO_GPIO_OUTPUT_ENABLE);
 787                UNLOCK(flags);
 788                (void)MACIO_IN32(KEYLARGO_FCR2);
 789                mdelay(250);
 790        } else {
 791                MACIO_OUT8(KL_GPIO_MODEM_POWER,
 792                        KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
 793                UNLOCK(flags);
 794        }
 795        if (value) {
 796                LOCK(flags);
 797                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 798                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 799                UNLOCK(flags); mdelay(250); LOCK(flags);
 800                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
 801                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 802                UNLOCK(flags); mdelay(250); LOCK(flags);
 803                MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
 804                (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
 805                UNLOCK(flags); mdelay(250);
 806        }
 807        return 0;
 808}
 809
 810static long
 811core99_ata100_enable(struct device_node *node, long value)
 812{
 813        unsigned long flags;
 814        struct pci_dev *pdev = NULL;
 815        u8 pbus, pid;
 816        int rc;
 817
 818        if (uninorth_rev < 0x24)
 819                return -ENODEV;
 820
 821        LOCK(flags);
 822        if (value)
 823                UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
 824        else
 825                UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
 826        (void)UN_IN(UNI_N_CLOCK_CNTL);
 827        UNLOCK(flags);
 828        udelay(20);
 829
 830        if (value) {
 831                if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
 832                        pdev = pci_get_bus_and_slot(pbus, pid);
 833                if (pdev == NULL)
 834                        return 0;
 835                rc = pci_enable_device(pdev);
 836                if (rc == 0)
 837                        pci_set_master(pdev);
 838                pci_dev_put(pdev);
 839                if (rc)
 840                        return rc;
 841        }
 842        return 0;
 843}
 844
 845static long
 846core99_ide_enable(struct device_node *node, long param, long value)
 847{
 848        /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
 849         * based ata-100
 850         */
 851        switch(param) {
 852            case 0:
 853                return simple_feature_tweak(node, macio_unknown,
 854                        KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
 855            case 1:
 856                return simple_feature_tweak(node, macio_unknown,
 857                        KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
 858            case 2:
 859                return simple_feature_tweak(node, macio_unknown,
 860                        KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
 861            case 3:
 862                return core99_ata100_enable(node, value);
 863            default:
 864                return -ENODEV;
 865        }
 866}
 867
 868static long
 869core99_ide_reset(struct device_node *node, long param, long value)
 870{
 871        switch(param) {
 872            case 0:
 873                return simple_feature_tweak(node, macio_unknown,
 874                        KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
 875            case 1:
 876                return simple_feature_tweak(node, macio_unknown,
 877                        KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
 878            case 2:
 879                return simple_feature_tweak(node, macio_unknown,
 880                        KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
 881            default:
 882                return -ENODEV;
 883        }
 884}
 885
 886static long
 887core99_gmac_enable(struct device_node *node, long param, long value)
 888{
 889        unsigned long flags;
 890
 891        LOCK(flags);
 892        if (value)
 893                UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
 894        else
 895                UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
 896        (void)UN_IN(UNI_N_CLOCK_CNTL);
 897        UNLOCK(flags);
 898        udelay(20);
 899
 900        return 0;
 901}
 902
 903static long
 904core99_gmac_phy_reset(struct device_node *node, long param, long value)
 905{
 906        unsigned long flags;
 907        struct macio_chip *macio;
 908
 909        macio = &macio_chips[0];
 910        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
 911            macio->type != macio_intrepid)
 912                return -ENODEV;
 913
 914        LOCK(flags);
 915        MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
 916        (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
 917        UNLOCK(flags);
 918        mdelay(10);
 919        LOCK(flags);
 920        MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
 921                KEYLARGO_GPIO_OUTOUT_DATA);
 922        UNLOCK(flags);
 923        mdelay(10);
 924
 925        return 0;
 926}
 927
 928static long
 929core99_sound_chip_enable(struct device_node *node, long param, long value)
 930{
 931        struct macio_chip*      macio;
 932        unsigned long           flags;
 933
 934        macio = macio_find(node, 0);
 935        if (!macio)
 936                return -ENODEV;
 937
 938        /* Do a better probe code, screamer G4 desktops &
 939         * iMacs can do that too, add a recalibrate  in
 940         * the driver as well
 941         */
 942        if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
 943            pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
 944                LOCK(flags);
 945                if (value)
 946                        MACIO_OUT8(KL_GPIO_SOUND_POWER,
 947                                KEYLARGO_GPIO_OUTPUT_ENABLE |
 948                                KEYLARGO_GPIO_OUTOUT_DATA);
 949                else
 950                        MACIO_OUT8(KL_GPIO_SOUND_POWER,
 951                                KEYLARGO_GPIO_OUTPUT_ENABLE);
 952                (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
 953                UNLOCK(flags);
 954        }
 955        return 0;
 956}
 957
 958static long
 959core99_airport_enable(struct device_node *node, long param, long value)
 960{
 961        struct macio_chip*      macio;
 962        unsigned long           flags;
 963        int                     state;
 964
 965        macio = macio_find(node, 0);
 966        if (!macio)
 967                return -ENODEV;
 968
 969        /* Hint: we allow passing of macio itself for the sake of the
 970         * sleep code
 971         */
 972        if (node != macio->of_node &&
 973            (!node->parent || node->parent != macio->of_node))
 974                return -ENODEV;
 975        state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
 976        if (value == state)
 977                return 0;
 978        if (value) {
 979                /* This code is a reproduction of OF enable-cardslot
 980                 * and init-wireless methods, slightly hacked until
 981                 * I got it working.
 982                 */
 983                LOCK(flags);
 984                MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
 985                (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
 986                UNLOCK(flags);
 987                mdelay(10);
 988                LOCK(flags);
 989                MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
 990                (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
 991                UNLOCK(flags);
 992
 993                mdelay(10);
 994
 995                LOCK(flags);
 996                MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
 997                (void)MACIO_IN32(KEYLARGO_FCR2);
 998                udelay(10);
 999                MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
1000                (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
1001                udelay(10);
1002                MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
1003                (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
1004                udelay(10);
1005                MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
1006                (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
1007                udelay(10);
1008                MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
1009                (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
1010                udelay(10);
1011                MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
1012                (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
1013                UNLOCK(flags);
1014                udelay(10);
1015                MACIO_OUT32(0x1c000, 0);
1016                mdelay(1);
1017                MACIO_OUT8(0x1a3e0, 0x41);
1018                (void)MACIO_IN8(0x1a3e0);
1019                udelay(10);
1020                LOCK(flags);
1021                MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
1022                (void)MACIO_IN32(KEYLARGO_FCR2);
1023                UNLOCK(flags);
1024                mdelay(100);
1025
1026                macio->flags |= MACIO_FLAG_AIRPORT_ON;
1027        } else {
1028                LOCK(flags);
1029                MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
1030                (void)MACIO_IN32(KEYLARGO_FCR2);
1031                MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
1032                MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
1033                MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
1034                MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
1035                MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
1036                (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
1037                UNLOCK(flags);
1038
1039                macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
1040        }
1041        return 0;
1042}
1043
1044#ifdef CONFIG_SMP
1045static long
1046core99_reset_cpu(struct device_node *node, long param, long value)
1047{
1048        unsigned int reset_io = 0;
1049        unsigned long flags;
1050        struct macio_chip *macio;
1051        struct device_node *np;
1052        struct device_node *cpus;
1053        const int dflt_reset_lines[] = {        KL_GPIO_RESET_CPU0,
1054                                                KL_GPIO_RESET_CPU1,
1055                                                KL_GPIO_RESET_CPU2,
1056                                                KL_GPIO_RESET_CPU3 };
1057
1058        macio = &macio_chips[0];
1059        if (macio->type != macio_keylargo)
1060                return -ENODEV;
1061
1062        cpus = of_find_node_by_path("/cpus");
1063        if (cpus == NULL)
1064                return -ENODEV;
1065        for (np = cpus->child; np != NULL; np = np->sibling) {
1066                const u32 *num = of_get_property(np, "reg", NULL);
1067                const u32 *rst = of_get_property(np, "soft-reset", NULL);
1068                if (num == NULL || rst == NULL)
1069                        continue;
1070                if (param == *num) {
1071                        reset_io = *rst;
1072                        break;
1073                }
1074        }
1075        of_node_put(cpus);
1076        if (np == NULL || reset_io == 0)
1077                reset_io = dflt_reset_lines[param];
1078
1079        LOCK(flags);
1080        MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
1081        (void)MACIO_IN8(reset_io);
1082        udelay(1);
1083        MACIO_OUT8(reset_io, 0);
1084        (void)MACIO_IN8(reset_io);
1085        UNLOCK(flags);
1086
1087        return 0;
1088}
1089#endif /* CONFIG_SMP */
1090
1091static long
1092core99_usb_enable(struct device_node *node, long param, long value)
1093{
1094        struct macio_chip *macio;
1095        unsigned long flags;
1096        const char *prop;
1097        int number;
1098        u32 reg;
1099
1100        macio = &macio_chips[0];
1101        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1102            macio->type != macio_intrepid)
1103                return -ENODEV;
1104
1105        prop = of_get_property(node, "AAPL,clock-id", NULL);
1106        if (!prop)
1107                return -ENODEV;
1108        if (strncmp(prop, "usb0u048", 8) == 0)
1109                number = 0;
1110        else if (strncmp(prop, "usb1u148", 8) == 0)
1111                number = 2;
1112        else if (strncmp(prop, "usb2u248", 8) == 0)
1113                number = 4;
1114        else
1115                return -ENODEV;
1116
1117        /* Sorry for the brute-force locking, but this is only used during
1118         * sleep and the timing seem to be critical
1119         */
1120        LOCK(flags);
1121        if (value) {
1122                /* Turn ON */
1123                if (number == 0) {
1124                        MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
1125                        (void)MACIO_IN32(KEYLARGO_FCR0);
1126                        UNLOCK(flags);
1127                        mdelay(1);
1128                        LOCK(flags);
1129                        MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
1130                } else if (number == 2) {
1131                        MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
1132                        UNLOCK(flags);
1133                        (void)MACIO_IN32(KEYLARGO_FCR0);
1134                        mdelay(1);
1135                        LOCK(flags);
1136                        MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
1137                } else if (number == 4) {
1138                        MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
1139                        UNLOCK(flags);
1140                        (void)MACIO_IN32(KEYLARGO_FCR1);
1141                        mdelay(1);
1142                        LOCK(flags);
1143                        MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
1144                }
1145                if (number < 4) {
1146                        reg = MACIO_IN32(KEYLARGO_FCR4);
1147                        reg &=  ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
1148                                KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
1149                        reg &=  ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
1150                                KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
1151                        MACIO_OUT32(KEYLARGO_FCR4, reg);
1152                        (void)MACIO_IN32(KEYLARGO_FCR4);
1153                        udelay(10);
1154                } else {
1155                        reg = MACIO_IN32(KEYLARGO_FCR3);
1156                        reg &=  ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
1157                                KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
1158                        reg &=  ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
1159                                KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
1160                        MACIO_OUT32(KEYLARGO_FCR3, reg);
1161                        (void)MACIO_IN32(KEYLARGO_FCR3);
1162                        udelay(10);
1163                }
1164                if (macio->type == macio_intrepid) {
1165                        /* wait for clock stopped bits to clear */
1166                        u32 test0 = 0, test1 = 0;
1167                        u32 status0, status1;
1168                        int timeout = 1000;
1169
1170                        UNLOCK(flags);
1171                        switch (number) {
1172                        case 0:
1173                                test0 = UNI_N_CLOCK_STOPPED_USB0;
1174                                test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
1175                                break;
1176                        case 2:
1177                                test0 = UNI_N_CLOCK_STOPPED_USB1;
1178                                test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
1179                                break;
1180                        case 4:
1181                                test0 = UNI_N_CLOCK_STOPPED_USB2;
1182                                test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
1183                                break;
1184                        }
1185                        do {
1186                                if (--timeout <= 0) {
1187                                        printk(KERN_ERR "core99_usb_enable: "
1188                                               "Timeout waiting for clocks\n");
1189                                        break;
1190                                }
1191                                mdelay(1);
1192                                status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
1193                                status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
1194                        } while ((status0 & test0) | (status1 & test1));
1195                        LOCK(flags);
1196                }
1197        } else {
1198                /* Turn OFF */
1199                if (number < 4) {
1200                        reg = MACIO_IN32(KEYLARGO_FCR4);
1201                        reg |=  KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
1202                                KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
1203                        reg |=  KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
1204                                KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
1205                        MACIO_OUT32(KEYLARGO_FCR4, reg);
1206                        (void)MACIO_IN32(KEYLARGO_FCR4);
1207                        udelay(1);
1208                } else {
1209                        reg = MACIO_IN32(KEYLARGO_FCR3);
1210                        reg |=  KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
1211                                KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
1212                        reg |=  KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
1213                                KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
1214                        MACIO_OUT32(KEYLARGO_FCR3, reg);
1215                        (void)MACIO_IN32(KEYLARGO_FCR3);
1216                        udelay(1);
1217                }
1218                if (number == 0) {
1219                        if (macio->type != macio_intrepid)
1220                                MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
1221                        (void)MACIO_IN32(KEYLARGO_FCR0);
1222                        udelay(1);
1223                        MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
1224                        (void)MACIO_IN32(KEYLARGO_FCR0);
1225                } else if (number == 2) {
1226                        if (macio->type != macio_intrepid)
1227                                MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
1228                        (void)MACIO_IN32(KEYLARGO_FCR0);
1229                        udelay(1);
1230                        MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
1231                        (void)MACIO_IN32(KEYLARGO_FCR0);
1232                } else if (number == 4) {
1233                        udelay(1);
1234                        MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
1235                        (void)MACIO_IN32(KEYLARGO_FCR1);
1236                }
1237                udelay(1);
1238        }
1239        UNLOCK(flags);
1240
1241        return 0;
1242}
1243
1244static long
1245core99_firewire_enable(struct device_node *node, long param, long value)
1246{
1247        unsigned long flags;
1248        struct macio_chip *macio;
1249
1250        macio = &macio_chips[0];
1251        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1252            macio->type != macio_intrepid)
1253                return -ENODEV;
1254        if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
1255                return -ENODEV;
1256
1257        LOCK(flags);
1258        if (value) {
1259                UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
1260                (void)UN_IN(UNI_N_CLOCK_CNTL);
1261        } else {
1262                UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
1263                (void)UN_IN(UNI_N_CLOCK_CNTL);
1264        }
1265        UNLOCK(flags);
1266        mdelay(1);
1267
1268        return 0;
1269}
1270
1271static long
1272core99_firewire_cable_power(struct device_node *node, long param, long value)
1273{
1274        unsigned long flags;
1275        struct macio_chip *macio;
1276
1277        /* Trick: we allow NULL node */
1278        if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
1279                return -ENODEV;
1280        macio = &macio_chips[0];
1281        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1282            macio->type != macio_intrepid)
1283                return -ENODEV;
1284        if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
1285                return -ENODEV;
1286
1287        LOCK(flags);
1288        if (value) {
1289                MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
1290                MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
1291                udelay(10);
1292        } else {
1293                MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
1294                MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
1295        }
1296        UNLOCK(flags);
1297        mdelay(1);
1298
1299        return 0;
1300}
1301
1302static long
1303intrepid_aack_delay_enable(struct device_node *node, long param, long value)
1304{
1305        unsigned long flags;
1306
1307        if (uninorth_rev < 0xd2)
1308                return -ENODEV;
1309
1310        LOCK(flags);
1311        if (param)
1312                UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
1313        else
1314                UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
1315        UNLOCK(flags);
1316
1317        return 0;
1318}
1319
1320
1321#endif /* CONFIG_PPC64 */
1322
1323static long
1324core99_read_gpio(struct device_node *node, long param, long value)
1325{
1326        struct macio_chip *macio = &macio_chips[0];
1327
1328        return MACIO_IN8(param);
1329}
1330
1331
1332static long
1333core99_write_gpio(struct device_node *node, long param, long value)
1334{
1335        struct macio_chip *macio = &macio_chips[0];
1336
1337        MACIO_OUT8(param, (u8)(value & 0xff));
1338        return 0;
1339}
1340
1341#ifdef CONFIG_PPC64
1342static long g5_gmac_enable(struct device_node *node, long param, long value)
1343{
1344        struct macio_chip *macio = &macio_chips[0];
1345        unsigned long flags;
1346
1347        if (node == NULL)
1348                return -ENODEV;
1349
1350        LOCK(flags);
1351        if (value) {
1352                MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
1353                mb();
1354                k2_skiplist[0] = NULL;
1355        } else {
1356                k2_skiplist[0] = node;
1357                mb();
1358                MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
1359        }
1360        
1361        UNLOCK(flags);
1362        mdelay(1);
1363
1364        return 0;
1365}
1366
1367static long g5_fw_enable(struct device_node *node, long param, long value)
1368{
1369        struct macio_chip *macio = &macio_chips[0];
1370        unsigned long flags;
1371
1372        if (node == NULL)
1373                return -ENODEV;
1374
1375        LOCK(flags);
1376        if (value) {
1377                MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
1378                mb();
1379                k2_skiplist[1] = NULL;
1380        } else {
1381                k2_skiplist[1] = node;
1382                mb();
1383                MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
1384        }
1385        
1386        UNLOCK(flags);
1387        mdelay(1);
1388
1389        return 0;
1390}
1391
1392static long g5_mpic_enable(struct device_node *node, long param, long value)
1393{
1394        unsigned long flags;
1395        struct device_node *parent = of_get_parent(node);
1396        int is_u3;
1397
1398        if (parent == NULL)
1399                return 0;
1400        is_u3 = strcmp(parent->name, "u3") == 0 ||
1401                strcmp(parent->name, "u4") == 0;
1402        of_node_put(parent);
1403        if (!is_u3)
1404                return 0;
1405
1406        LOCK(flags);
1407        UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
1408        UNLOCK(flags);
1409
1410        return 0;
1411}
1412
1413static long g5_eth_phy_reset(struct device_node *node, long param, long value)
1414{
1415        struct macio_chip *macio = &macio_chips[0];
1416        struct device_node *phy;
1417        int need_reset;
1418
1419        /*
1420         * We must not reset the combo PHYs, only the BCM5221 found in
1421         * the iMac G5.
1422         */
1423        phy = of_get_next_child(node, NULL);
1424        if (!phy)
1425                return -ENODEV;
1426        need_reset = of_device_is_compatible(phy, "B5221");
1427        of_node_put(phy);
1428        if (!need_reset)
1429                return 0;
1430
1431        /* PHY reset is GPIO 29, not in device-tree unfortunately */
1432        MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
1433                   KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
1434        /* Thankfully, this is now always called at a time when we can
1435         * schedule by sungem.
1436         */
1437        msleep(10);
1438        MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
1439
1440        return 0;
1441}
1442
1443static long g5_i2s_enable(struct device_node *node, long param, long value)
1444{
1445        /* Very crude implementation for now */
1446        struct macio_chip *macio = &macio_chips[0];
1447        unsigned long flags;
1448        int cell;
1449        u32 fcrs[3][3] = {
1450                { 0,
1451                  K2_FCR1_I2S0_CELL_ENABLE |
1452                  K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
1453                  KL3_I2S0_CLK18_ENABLE
1454                },
1455                { KL0_SCC_A_INTF_ENABLE,
1456                  K2_FCR1_I2S1_CELL_ENABLE |
1457                  K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
1458                  KL3_I2S1_CLK18_ENABLE
1459                },
1460                { KL0_SCC_B_INTF_ENABLE,
1461                  SH_FCR1_I2S2_CELL_ENABLE |
1462                  SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
1463                  SH_FCR3_I2S2_CLK18_ENABLE
1464                },
1465        };
1466
1467        if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
1468                return -ENODEV;
1469        if (strncmp(node->name, "i2s-", 4))
1470                return -ENODEV;
1471        cell = node->name[4] - 'a';
1472        switch(cell) {
1473        case 0:
1474        case 1:
1475                break;
1476        case 2:
1477                if (macio->type == macio_shasta)
1478                        break;
1479        default:
1480                return -ENODEV;
1481        }
1482
1483        LOCK(flags);
1484        if (value) {
1485                MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
1486                MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
1487                MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
1488        } else {
1489                MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
1490                MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
1491                MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
1492        }
1493        udelay(10);
1494        UNLOCK(flags);
1495
1496        return 0;
1497}
1498
1499
1500#ifdef CONFIG_SMP
1501static long g5_reset_cpu(struct device_node *node, long param, long value)
1502{
1503        unsigned int reset_io = 0;
1504        unsigned long flags;
1505        struct macio_chip *macio;
1506        struct device_node *np;
1507        struct device_node *cpus;
1508
1509        macio = &macio_chips[0];
1510        if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
1511                return -ENODEV;
1512
1513        cpus = of_find_node_by_path("/cpus");
1514        if (cpus == NULL)
1515                return -ENODEV;
1516        for (np = cpus->child; np != NULL; np = np->sibling) {
1517                const u32 *num = of_get_property(np, "reg", NULL);
1518                const u32 *rst = of_get_property(np, "soft-reset", NULL);
1519                if (num == NULL || rst == NULL)
1520                        continue;
1521                if (param == *num) {
1522                        reset_io = *rst;
1523                        break;
1524                }
1525        }
1526        of_node_put(cpus);
1527        if (np == NULL || reset_io == 0)
1528                return -ENODEV;
1529
1530        LOCK(flags);
1531        MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
1532        (void)MACIO_IN8(reset_io);
1533        udelay(1);
1534        MACIO_OUT8(reset_io, 0);
1535        (void)MACIO_IN8(reset_io);
1536        UNLOCK(flags);
1537
1538        return 0;
1539}
1540#endif /* CONFIG_SMP */
1541
1542/*
1543 * This can be called from pmac_smp so isn't static
1544 *
1545 * This takes the second CPU off the bus on dual CPU machines
1546 * running UP
1547 */
1548void g5_phy_disable_cpu1(void)
1549{
1550        if (uninorth_maj == 3)
1551                UN_OUT(U3_API_PHY_CONFIG_1, 0);
1552}
1553#endif /* CONFIG_PPC64 */
1554
1555#ifndef CONFIG_PPC64
1556
1557
1558#ifdef CONFIG_PM
1559static u32 save_gpio_levels[2];
1560static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
1561static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
1562static u32 save_unin_clock_ctl;
1563
1564static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
1565{
1566        u32 temp;
1567
1568        if (sleep_mode) {
1569                mdelay(1);
1570                MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
1571                (void)MACIO_IN32(KEYLARGO_FCR0);
1572                mdelay(1);
1573        }
1574
1575        MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1576                                KL0_SCC_CELL_ENABLE |
1577                                KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
1578                                KL0_IRDA_CLK19_ENABLE);
1579
1580        MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
1581        MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
1582
1583        MACIO_BIC(KEYLARGO_FCR1,
1584                KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
1585                KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
1586                KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1587                KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1588                KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1589                KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
1590                KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
1591                KL1_UIDE_ENABLE);
1592
1593        MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
1594        MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
1595
1596        temp = MACIO_IN32(KEYLARGO_FCR3);
1597        if (macio->rev >= 2) {
1598                temp |= KL3_SHUTDOWN_PLL2X;
1599                if (sleep_mode)
1600                        temp |= KL3_SHUTDOWN_PLL_TOTAL;
1601        }
1602
1603        temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
1604                KL3_SHUTDOWN_PLLKW35;
1605        if (sleep_mode)
1606                temp |= KL3_SHUTDOWN_PLLKW12;
1607        temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
1608                | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
1609        if (sleep_mode)
1610                temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
1611        MACIO_OUT32(KEYLARGO_FCR3, temp);
1612
1613        /* Flush posted writes & wait a bit */
1614        (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
1615}
1616
1617static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
1618{
1619        u32 temp;
1620
1621        MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1622                                KL0_SCC_CELL_ENABLE |
1623                                KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
1624
1625        MACIO_BIC(KEYLARGO_FCR1,
1626                KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
1627                KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
1628                KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1629                KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1630                KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1631                KL1_UIDE_ENABLE);
1632        if (pmac_mb.board_flags & PMAC_MB_MOBILE)
1633                MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
1634
1635        MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
1636
1637        temp = MACIO_IN32(KEYLARGO_FCR3);
1638        temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
1639                KL3_SHUTDOWN_PLLKW35;
1640        temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
1641                | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
1642        if (sleep_mode)
1643                temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
1644        MACIO_OUT32(KEYLARGO_FCR3, temp);
1645
1646        /* Flush posted writes & wait a bit */
1647        (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
1648}
1649
1650static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
1651{
1652        u32 temp;
1653
1654        MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
1655                  KL0_SCC_CELL_ENABLE);
1656
1657        MACIO_BIC(KEYLARGO_FCR1,
1658                KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
1659                KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
1660                KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
1661                KL1_EIDE0_ENABLE);
1662        if (pmac_mb.board_flags & PMAC_MB_MOBILE)
1663                MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
1664
1665        temp = MACIO_IN32(KEYLARGO_FCR3);
1666        temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
1667                  KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
1668        if (sleep_mode)
1669                temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
1670        MACIO_OUT32(KEYLARGO_FCR3, temp);
1671
1672        /* Flush posted writes & wait a bit */
1673        (void)MACIO_IN32(KEYLARGO_FCR0);
1674        mdelay(10);
1675}
1676
1677
1678static int
1679core99_sleep(void)
1680{
1681        struct macio_chip *macio;
1682        int i;
1683
1684        macio = &macio_chips[0];
1685        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1686            macio->type != macio_intrepid)
1687                return -ENODEV;
1688
1689        /* We power off the wireless slot in case it was not done
1690         * by the driver. We don't power it on automatically however
1691         */
1692        if (macio->flags & MACIO_FLAG_AIRPORT_ON)
1693                core99_airport_enable(macio->of_node, 0, 0);
1694
1695        /* We power off the FW cable. Should be done by the driver... */
1696        if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
1697                core99_firewire_enable(NULL, 0, 0);
1698                core99_firewire_cable_power(NULL, 0, 0);
1699        }
1700
1701        /* We make sure int. modem is off (in case driver lost it) */
1702        if (macio->type == macio_keylargo)
1703                core99_modem_enable(macio->of_node, 0, 0);
1704        else
1705                pangea_modem_enable(macio->of_node, 0, 0);
1706
1707        /* We make sure the sound is off as well */
1708        core99_sound_chip_enable(macio->of_node, 0, 0);
1709
1710        /*
1711         * Save various bits of KeyLargo
1712         */
1713
1714        /* Save the state of the various GPIOs */
1715        save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
1716        save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
1717        for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
1718                save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
1719        for (i=0; i<KEYLARGO_GPIO_CNT; i++)
1720                save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
1721
1722        /* Save the FCRs */
1723        if (macio->type == macio_keylargo)
1724                save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
1725        save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
1726        save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
1727        save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
1728        save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
1729        save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
1730        if (macio->type == macio_pangea || macio->type == macio_intrepid)
1731                save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
1732
1733        /* Save state & config of DBDMA channels */
1734        dbdma_save(macio, save_dbdma);
1735
1736        /*
1737         * Turn off as much as we can
1738         */
1739        if (macio->type == macio_pangea)
1740                pangea_shutdown(macio, 1);
1741        else if (macio->type == macio_intrepid)
1742                intrepid_shutdown(macio, 1);
1743        else if (macio->type == macio_keylargo)
1744                keylargo_shutdown(macio, 1);
1745
1746        /*
1747         * Put the host bridge to sleep
1748         */
1749
1750        save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
1751        /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
1752         * enabled !
1753         */
1754        UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
1755               ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
1756        udelay(100);
1757        UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
1758        UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
1759        mdelay(10);
1760
1761        /*
1762         * FIXME: A bit of black magic with OpenPIC (don't ask me why)
1763         */
1764        if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
1765                MACIO_BIS(0x506e0, 0x00400000);
1766                MACIO_BIS(0x506e0, 0x80000000);
1767        }
1768        return 0;
1769}
1770
1771static int
1772core99_wake_up(void)
1773{
1774        struct macio_chip *macio;
1775        int i;
1776
1777        macio = &macio_chips[0];
1778        if (macio->type != macio_keylargo && macio->type != macio_pangea &&
1779            macio->type != macio_intrepid)
1780                return -ENODEV;
1781
1782        /*
1783         * Wakeup the host bridge
1784         */
1785        UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
1786        udelay(10);
1787        UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
1788        udelay(10);
1789
1790        /*
1791         * Restore KeyLargo
1792         */
1793
1794        if (macio->type == macio_keylargo) {
1795                MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
1796                (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
1797        }
1798        MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
1799        (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
1800        MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
1801        (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
1802        MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
1803        (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
1804        MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
1805        (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
1806        MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
1807        (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
1808        if (macio->type == macio_pangea || macio->type == macio_intrepid) {
1809                MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
1810                (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
1811        }
1812
1813        dbdma_restore(macio, save_dbdma);
1814
1815        MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
1816        MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
1817        for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
1818                MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
1819        for (i=0; i<KEYLARGO_GPIO_CNT; i++)
1820                MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
1821
1822        /* FIXME more black magic with OpenPIC ... */
1823        if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
1824                MACIO_BIC(0x506e0, 0x00400000);
1825                MACIO_BIC(0x506e0, 0x80000000);
1826        }
1827
1828        UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
1829        udelay(100);
1830
1831        return 0;
1832}
1833
1834#endif /* CONFIG_PM */
1835
1836static long
1837core99_sleep_state(struct device_node *node, long param, long value)
1838{
1839        /* Param == 1 means to enter the "fake sleep" mode that is
1840         * used for CPU speed switch
1841         */
1842        if (param == 1) {
1843                if (value == 1) {
1844                        UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
1845                        UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
1846                } else {
1847                        UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
1848                        udelay(10);
1849                        UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
1850                        udelay(10);
1851                }
1852                return 0;
1853        }
1854        if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
1855                return -EPERM;
1856
1857#ifdef CONFIG_PM
1858        if (value == 1)
1859                return core99_sleep();
1860        else if (value == 0)
1861                return core99_wake_up();
1862
1863#endif /* CONFIG_PM */
1864        return 0;
1865}
1866
1867#endif /* CONFIG_PPC64 */
1868
1869static long
1870generic_dev_can_wake(struct device_node *node, long param, long value)
1871{
1872        /* Todo: eventually check we are really dealing with on-board
1873         * video device ...
1874         */
1875
1876        if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
1877                pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
1878        return 0;
1879}
1880
1881static long generic_get_mb_info(struct device_node *node, long param, long value)
1882{
1883        switch(param) {
1884                case PMAC_MB_INFO_MODEL:
1885                        return pmac_mb.model_id;
1886                case PMAC_MB_INFO_FLAGS:
1887                        return pmac_mb.board_flags;
1888                case PMAC_MB_INFO_NAME:
1889                        /* hack hack hack... but should work */
1890                        *((const char **)value) = pmac_mb.model_name;
1891                        return 0;
1892        }
1893        return -EINVAL;
1894}
1895
1896
1897/*
1898 * Table definitions
1899 */
1900
1901/* Used on any machine
1902 */
1903static struct feature_table_entry any_features[] = {
1904        { PMAC_FTR_GET_MB_INFO,         generic_get_mb_info },
1905        { PMAC_FTR_DEVICE_CAN_WAKE,     generic_dev_can_wake },
1906        { 0, NULL }
1907};
1908
1909#ifndef CONFIG_PPC64
1910
1911/* OHare based motherboards. Currently, we only use these on the
1912 * 2400,3400 and 3500 series powerbooks. Some older desktops seem
1913 * to have issues with turning on/off those asic cells
1914 */
1915static struct feature_table_entry ohare_features[] = {
1916        { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1917        { PMAC_FTR_SWIM3_ENABLE,        ohare_floppy_enable },
1918        { PMAC_FTR_MESH_ENABLE,         ohare_mesh_enable },
1919        { PMAC_FTR_IDE_ENABLE,          ohare_ide_enable},
1920        { PMAC_FTR_IDE_RESET,           ohare_ide_reset},
1921        { PMAC_FTR_SLEEP_STATE,         ohare_sleep_state },
1922        { 0, NULL }
1923};
1924
1925/* Heathrow desktop machines (Beige G3).
1926 * Separated as some features couldn't be properly tested
1927 * and the serial port control bits appear to confuse it.
1928 */
1929static struct feature_table_entry heathrow_desktop_features[] = {
1930        { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1931        { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1932        { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1933        { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1934        { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1935        { 0, NULL }
1936};
1937
1938/* Heathrow based laptop, that is the Wallstreet and mainstreet
1939 * powerbooks.
1940 */
1941static struct feature_table_entry heathrow_laptop_features[] = {
1942        { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1943        { PMAC_FTR_MODEM_ENABLE,        heathrow_modem_enable },
1944        { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1945        { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1946        { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1947        { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1948        { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1949        { PMAC_FTR_SOUND_CHIP_ENABLE,   heathrow_sound_enable },
1950        { PMAC_FTR_SLEEP_STATE,         heathrow_sleep_state },
1951        { 0, NULL }
1952};
1953
1954/* Paddington based machines
1955 * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
1956 */
1957static struct feature_table_entry paddington_features[] = {
1958        { PMAC_FTR_SCC_ENABLE,          ohare_htw_scc_enable },
1959        { PMAC_FTR_MODEM_ENABLE,        heathrow_modem_enable },
1960        { PMAC_FTR_SWIM3_ENABLE,        heathrow_floppy_enable },
1961        { PMAC_FTR_MESH_ENABLE,         heathrow_mesh_enable },
1962        { PMAC_FTR_IDE_ENABLE,          heathrow_ide_enable },
1963        { PMAC_FTR_IDE_RESET,           heathrow_ide_reset },
1964        { PMAC_FTR_BMAC_ENABLE,         heathrow_bmac_enable },
1965        { PMAC_FTR_SOUND_CHIP_ENABLE,   heathrow_sound_enable },
1966        { PMAC_FTR_SLEEP_STATE,         heathrow_sleep_state },
1967        { 0, NULL }
1968};
1969
1970/* Core99 & MacRISC 2 machines (all machines released since the
1971 * iBook (included), that is all AGP machines, except pangea
1972 * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
1973 * used on iBook2 & iMac "flow power".
1974 */
1975static struct feature_table_entry core99_features[] = {
1976        { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
1977        { PMAC_FTR_MODEM_ENABLE,        core99_modem_enable },
1978        { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
1979        { PMAC_FTR_IDE_RESET,           core99_ide_reset },
1980        { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
1981        { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
1982        { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
1983        { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
1984        { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
1985        { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
1986        { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
1987#ifdef CONFIG_PM
1988        { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
1989#endif
1990#ifdef CONFIG_SMP
1991        { PMAC_FTR_RESET_CPU,           core99_reset_cpu },
1992#endif /* CONFIG_SMP */
1993        { PMAC_FTR_READ_GPIO,           core99_read_gpio },
1994        { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
1995        { 0, NULL }
1996};
1997
1998/* RackMac
1999 */
2000static struct feature_table_entry rackmac_features[] = {
2001        { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
2002        { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
2003        { PMAC_FTR_IDE_RESET,           core99_ide_reset },
2004        { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2005        { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2006        { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2007        { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2008        { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2009        { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2010#ifdef CONFIG_SMP
2011        { PMAC_FTR_RESET_CPU,           core99_reset_cpu },
2012#endif /* CONFIG_SMP */
2013        { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2014        { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2015        { 0, NULL }
2016};
2017
2018/* Pangea features
2019 */
2020static struct feature_table_entry pangea_features[] = {
2021        { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
2022        { PMAC_FTR_MODEM_ENABLE,        pangea_modem_enable },
2023        { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
2024        { PMAC_FTR_IDE_RESET,           core99_ide_reset },
2025        { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2026        { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2027        { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
2028        { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
2029        { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2030        { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2031        { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2032        { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2033        { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2034        { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2035        { 0, NULL }
2036};
2037
2038/* Intrepid features
2039 */
2040static struct feature_table_entry intrepid_features[] = {
2041        { PMAC_FTR_SCC_ENABLE,          core99_scc_enable },
2042        { PMAC_FTR_MODEM_ENABLE,        pangea_modem_enable },
2043        { PMAC_FTR_IDE_ENABLE,          core99_ide_enable },
2044        { PMAC_FTR_IDE_RESET,           core99_ide_reset },
2045        { PMAC_FTR_GMAC_ENABLE,         core99_gmac_enable },
2046        { PMAC_FTR_GMAC_PHY_RESET,      core99_gmac_phy_reset },
2047        { PMAC_FTR_SOUND_CHIP_ENABLE,   core99_sound_chip_enable },
2048        { PMAC_FTR_AIRPORT_ENABLE,      core99_airport_enable },
2049        { PMAC_FTR_USB_ENABLE,          core99_usb_enable },
2050        { PMAC_FTR_1394_ENABLE,         core99_firewire_enable },
2051        { PMAC_FTR_1394_CABLE_POWER,    core99_firewire_cable_power },
2052        { PMAC_FTR_SLEEP_STATE,         core99_sleep_state },
2053        { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2054        { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2055        { PMAC_FTR_AACK_DELAY_ENABLE,   intrepid_aack_delay_enable },
2056        { 0, NULL }
2057};
2058
2059#else /* CONFIG_PPC64 */
2060
2061/* G5 features
2062 */
2063static struct feature_table_entry g5_features[] = {
2064        { PMAC_FTR_GMAC_ENABLE,         g5_gmac_enable },
2065        { PMAC_FTR_1394_ENABLE,         g5_fw_enable },
2066        { PMAC_FTR_ENABLE_MPIC,         g5_mpic_enable },
2067        { PMAC_FTR_GMAC_PHY_RESET,      g5_eth_phy_reset },
2068        { PMAC_FTR_SOUND_CHIP_ENABLE,   g5_i2s_enable },
2069#ifdef CONFIG_SMP
2070        { PMAC_FTR_RESET_CPU,           g5_reset_cpu },
2071#endif /* CONFIG_SMP */
2072        { PMAC_FTR_READ_GPIO,           core99_read_gpio },
2073        { PMAC_FTR_WRITE_GPIO,          core99_write_gpio },
2074        { 0, NULL }
2075};
2076
2077#endif /* CONFIG_PPC64 */
2078
2079static struct pmac_mb_def pmac_mb_defs[] = {
2080#ifndef CONFIG_PPC64
2081        /*
2082         * Desktops
2083         */
2084
2085        {       "AAPL,8500",                    "PowerMac 8500/8600",
2086                PMAC_TYPE_PSURGE,               NULL,
2087                0
2088        },
2089        {       "AAPL,9500",                    "PowerMac 9500/9600",
2090                PMAC_TYPE_PSURGE,               NULL,
2091                0
2092        },
2093        {       "AAPL,7200",                    "PowerMac 7200",
2094                PMAC_TYPE_PSURGE,               NULL,
2095                0
2096        },
2097        {       "AAPL,7300",                    "PowerMac 7200/7300",
2098                PMAC_TYPE_PSURGE,               NULL,
2099                0
2100        },
2101        {       "AAPL,7500",                    "PowerMac 7500",
2102                PMAC_TYPE_PSURGE,               NULL,
2103                0
2104        },
2105        {       "AAPL,ShinerESB",               "Apple Network Server",
2106                PMAC_TYPE_ANS,                  NULL,
2107                0
2108        },
2109        {       "AAPL,e407",                    "Alchemy",
2110                PMAC_TYPE_ALCHEMY,              NULL,
2111                0
2112        },
2113        {       "AAPL,e411",                    "Gazelle",
2114                PMAC_TYPE_GAZELLE,              NULL,
2115                0
2116        },
2117        {       "AAPL,Gossamer",                "PowerMac G3 (Gossamer)",
2118                PMAC_TYPE_GOSSAMER,             heathrow_desktop_features,
2119                0
2120        },
2121        {       "AAPL,PowerMac G3",             "PowerMac G3 (Silk)",
2122                PMAC_TYPE_SILK,                 heathrow_desktop_features,
2123                0
2124        },
2125        {       "PowerMac1,1",                  "Blue&White G3",
2126                PMAC_TYPE_YOSEMITE,             paddington_features,
2127                0
2128        },
2129        {       "PowerMac1,2",                  "PowerMac G4 PCI Graphics",
2130                PMAC_TYPE_YIKES,                paddington_features,
2131                0
2132        },
2133        {       "PowerMac2,1",                  "iMac FireWire",
2134                PMAC_TYPE_FW_IMAC,              core99_features,
2135                PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2136        },
2137        {       "PowerMac2,2",                  "iMac FireWire",
2138                PMAC_TYPE_FW_IMAC,              core99_features,
2139                PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2140        },
2141        {       "PowerMac3,1",                  "PowerMac G4 AGP Graphics",
2142                PMAC_TYPE_SAWTOOTH,             core99_features,
2143                PMAC_MB_OLD_CORE99
2144        },
2145        {       "PowerMac3,2",                  "PowerMac G4 AGP Graphics",
2146                PMAC_TYPE_SAWTOOTH,             core99_features,
2147                PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2148        },
2149        {       "PowerMac3,3",                  "PowerMac G4 AGP Graphics",
2150                PMAC_TYPE_SAWTOOTH,             core99_features,
2151                PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2152        },
2153        {       "PowerMac3,4",                  "PowerMac G4 Silver",
2154                PMAC_TYPE_QUICKSILVER,          core99_features,
2155                PMAC_MB_MAY_SLEEP
2156        },
2157        {       "PowerMac3,5",                  "PowerMac G4 Silver",
2158                PMAC_TYPE_QUICKSILVER,          core99_features,
2159                PMAC_MB_MAY_SLEEP
2160        },
2161        {       "PowerMac3,6",                  "PowerMac G4 Windtunnel",
2162                PMAC_TYPE_WINDTUNNEL,           core99_features,
2163                PMAC_MB_MAY_SLEEP,
2164        },
2165        {       "PowerMac4,1",                  "iMac \"Flower Power\"",
2166                PMAC_TYPE_PANGEA_IMAC,          pangea_features,
2167                PMAC_MB_MAY_SLEEP
2168        },
2169        {       "PowerMac4,2",                  "Flat panel iMac",
2170                PMAC_TYPE_FLAT_PANEL_IMAC,      pangea_features,
2171                PMAC_MB_CAN_SLEEP
2172        },
2173        {       "PowerMac4,4",                  "eMac",
2174                PMAC_TYPE_EMAC,                 core99_features,
2175                PMAC_MB_MAY_SLEEP
2176        },
2177        {       "PowerMac5,1",                  "PowerMac G4 Cube",
2178                PMAC_TYPE_CUBE,                 core99_features,
2179                PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
2180        },
2181        {       "PowerMac6,1",                  "Flat panel iMac",
2182                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2183                PMAC_MB_MAY_SLEEP,
2184        },
2185        {       "PowerMac6,3",                  "Flat panel iMac",
2186                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2187                PMAC_MB_MAY_SLEEP,
2188        },
2189        {       "PowerMac6,4",                  "eMac",
2190                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2191                PMAC_MB_MAY_SLEEP,
2192        },
2193        {       "PowerMac10,1",                 "Mac mini",
2194                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2195                PMAC_MB_MAY_SLEEP,
2196        },
2197        {       "PowerMac10,2",                 "Mac mini (Late 2005)",
2198                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2199                PMAC_MB_MAY_SLEEP,
2200        },
2201        {       "iMac,1",                       "iMac (first generation)",
2202                PMAC_TYPE_ORIG_IMAC,            paddington_features,
2203                0
2204        },
2205
2206        /*
2207         * Xserve's
2208         */
2209
2210        {       "RackMac1,1",                   "XServe",
2211                PMAC_TYPE_RACKMAC,              rackmac_features,
2212                0,
2213        },
2214        {       "RackMac1,2",                   "XServe rev. 2",
2215                PMAC_TYPE_RACKMAC,              rackmac_features,
2216                0,
2217        },
2218
2219        /*
2220         * Laptops
2221         */
2222
2223        {       "AAPL,3400/2400",               "PowerBook 3400",
2224                PMAC_TYPE_HOOPER,               ohare_features,
2225                PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2226        },
2227        {       "AAPL,3500",                    "PowerBook 3500",
2228                PMAC_TYPE_KANGA,                ohare_features,
2229                PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2230        },
2231        {       "AAPL,PowerBook1998",           "PowerBook Wallstreet",
2232                PMAC_TYPE_WALLSTREET,           heathrow_laptop_features,
2233                PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2234        },
2235        {       "PowerBook1,1",                 "PowerBook 101 (Lombard)",
2236                PMAC_TYPE_101_PBOOK,            paddington_features,
2237                PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
2238        },
2239        {       "PowerBook2,1",                 "iBook (first generation)",
2240                PMAC_TYPE_ORIG_IBOOK,           core99_features,
2241                PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2242        },
2243        {       "PowerBook2,2",                 "iBook FireWire",
2244                PMAC_TYPE_FW_IBOOK,             core99_features,
2245                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
2246                PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2247        },
2248        {       "PowerBook3,1",                 "PowerBook Pismo",
2249                PMAC_TYPE_PISMO,                core99_features,
2250                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
2251                PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
2252        },
2253        {       "PowerBook3,2",                 "PowerBook Titanium",
2254                PMAC_TYPE_TITANIUM,             core99_features,
2255                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2256        },
2257        {       "PowerBook3,3",                 "PowerBook Titanium II",
2258                PMAC_TYPE_TITANIUM2,            core99_features,
2259                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2260        },
2261        {       "PowerBook3,4",                 "PowerBook Titanium III",
2262                PMAC_TYPE_TITANIUM3,            core99_features,
2263                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2264        },
2265        {       "PowerBook3,5",                 "PowerBook Titanium IV",
2266                PMAC_TYPE_TITANIUM4,            core99_features,
2267                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2268        },
2269        {       "PowerBook4,1",                 "iBook 2",
2270                PMAC_TYPE_IBOOK2,               pangea_features,
2271                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2272        },
2273        {       "PowerBook4,2",                 "iBook 2",
2274                PMAC_TYPE_IBOOK2,               pangea_features,
2275                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2276        },
2277        {       "PowerBook4,3",                 "iBook 2 rev. 2",
2278                PMAC_TYPE_IBOOK2,               pangea_features,
2279                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
2280        },
2281        {       "PowerBook5,1",                 "PowerBook G4 17\"",
2282                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2283                PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2284        },
2285        {       "PowerBook5,2",                 "PowerBook G4 15\"",
2286                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2287                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2288        },
2289        {       "PowerBook5,3",                 "PowerBook G4 17\"",
2290                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2291                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2292        },
2293        {       "PowerBook5,4",                 "PowerBook G4 15\"",
2294                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2295                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2296        },
2297        {       "PowerBook5,5",                 "PowerBook G4 17\"",
2298                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2299                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2300        },
2301        {       "PowerBook5,6",                 "PowerBook G4 15\"",
2302                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2303                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2304        },
2305        {       "PowerBook5,7",                 "PowerBook G4 17\"",
2306                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2307                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2308        },
2309        {       "PowerBook5,8",                 "PowerBook G4 15\"",
2310                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2311                PMAC_MB_MAY_SLEEP  | PMAC_MB_MOBILE,
2312        },
2313        {       "PowerBook5,9",                 "PowerBook G4 17\"",
2314                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2315                PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
2316        },
2317        {       "PowerBook6,1",                 "PowerBook G4 12\"",
2318                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2319                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2320        },
2321        {       "PowerBook6,2",                 "PowerBook G4",
2322                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2323                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2324        },
2325        {       "PowerBook6,3",                 "iBook G4",
2326                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2327                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2328        },
2329        {       "PowerBook6,4",                 "PowerBook G4 12\"",
2330                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2331                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2332        },
2333        {       "PowerBook6,5",                 "iBook G4",
2334                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2335                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2336        },
2337        {       "PowerBook6,7",                 "iBook G4",
2338                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2339                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2340        },
2341        {       "PowerBook6,8",                 "PowerBook G4 12\"",
2342                PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
2343                PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
2344        },
2345#else /* CONFIG_PPC64 */
2346        {       "PowerMac7,2",                  "PowerMac G5",
2347                PMAC_TYPE_POWERMAC_G5,          g5_features,
2348                0,
2349        },
2350#ifdef CONFIG_PPC64
2351        {       "PowerMac7,3",                  "PowerMac G5",
2352                PMAC_TYPE_POWERMAC_G5,          g5_features,
2353                0,
2354        },
2355        {       "PowerMac8,1",                  "iMac G5",
2356                PMAC_TYPE_IMAC_G5,              g5_features,
2357                0,
2358        },
2359        {       "PowerMac9,1",                  "PowerMac G5",
2360                PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2361                0,
2362        },
2363        {       "PowerMac11,2",                 "PowerMac G5 Dual Core",
2364                PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2365                0,
2366        },
2367        {       "PowerMac12,1",                 "iMac G5 (iSight)",
2368                PMAC_TYPE_POWERMAC_G5_U3L,      g5_features,
2369                0,
2370        },
2371        {       "RackMac3,1",                   "XServe G5",
2372                PMAC_TYPE_XSERVE_G5,            g5_features,
2373                0,
2374        },
2375#endif /* CONFIG_PPC64 */
2376#endif /* CONFIG_PPC64 */
2377};
2378
2379/*
2380 * The toplevel feature_call callback
2381 */
2382long pmac_do_feature_call(unsigned int selector, ...)
2383{
2384        struct device_node *node;
2385        long param, value;
2386        int i;
2387        feature_call func = NULL;
2388        va_list args;
2389
2390        if (pmac_mb.features)
2391                for (i=0; pmac_mb.features[i].function; i++)
2392                        if (pmac_mb.features[i].selector == selector) {
2393                                func = pmac_mb.features[i].function;
2394                                break;
2395                        }
2396        if (!func)
2397                for (i=0; any_features[i].function; i++)
2398                        if (any_features[i].selector == selector) {
2399                                func = any_features[i].function;
2400                                break;
2401                        }
2402        if (!func)
2403                return -ENODEV;
2404
2405        va_start(args, selector);
2406        node = (struct device_node*)va_arg(args, void*);
2407        param = va_arg(args, long);
2408        value = va_arg(args, long);
2409        va_end(args);
2410
2411        return func(node, param, value);
2412}
2413
2414static int __init probe_motherboard(void)
2415{
2416        int i;
2417        struct macio_chip *macio = &macio_chips[0];
2418        const char *model = NULL;
2419        struct device_node *dt;
2420        int ret = 0;
2421
2422        /* Lookup known motherboard type in device-tree. First try an
2423         * exact match on the "model" property, then try a "compatible"
2424         * match is none is found.
2425         */
2426        dt = of_find_node_by_name(NULL, "device-tree");
2427        if (dt != NULL)
2428                model = of_get_property(dt, "model", NULL);
2429        for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
2430            if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
2431                pmac_mb = pmac_mb_defs[i];
2432                goto found;
2433            }
2434        }
2435        for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
2436            if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
2437                pmac_mb = pmac_mb_defs[i];
2438                goto found;
2439            }
2440        }
2441
2442        /* Fallback to selection depending on mac-io chip type */
2443        switch(macio->type) {
2444#ifndef CONFIG_PPC64
2445            case macio_grand_central:
2446                pmac_mb.model_id = PMAC_TYPE_PSURGE;
2447                pmac_mb.model_name = "Unknown PowerSurge";
2448                break;
2449            case macio_ohare:
2450                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
2451                pmac_mb.model_name = "Unknown OHare-based";
2452                break;
2453            case macio_heathrow:
2454                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
2455                pmac_mb.model_name = "Unknown Heathrow-based";
2456                pmac_mb.features = heathrow_desktop_features;
2457                break;
2458            case macio_paddington:
2459                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
2460                pmac_mb.model_name = "Unknown Paddington-based";
2461                pmac_mb.features = paddington_features;
2462                break;
2463            case macio_keylargo:
2464                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
2465                pmac_mb.model_name = "Unknown Keylargo-based";
2466                pmac_mb.features = core99_features;
2467                break;
2468            case macio_pangea:
2469                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
2470                pmac_mb.model_name = "Unknown Pangea-based";
2471                pmac_mb.features = pangea_features;
2472                break;
2473            case macio_intrepid:
2474                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
2475                pmac_mb.model_name = "Unknown Intrepid-based";
2476                pmac_mb.features = intrepid_features;
2477                break;
2478#else /* CONFIG_PPC64 */
2479        case macio_keylargo2:
2480                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
2481                pmac_mb.model_name = "Unknown K2-based";
2482                pmac_mb.features = g5_features;
2483                break;
2484        case macio_shasta:
2485                pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
2486                pmac_mb.model_name = "Unknown Shasta-based";
2487                pmac_mb.features = g5_features;
2488                break;
2489#endif /* CONFIG_PPC64 */
2490        default:
2491                ret = -ENODEV;
2492                goto done;
2493        }
2494found:
2495#ifndef CONFIG_PPC64
2496        /* Fixup Hooper vs. Comet */
2497        if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
2498                u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
2499                if (!mach_id_ptr) {
2500                        ret = -ENODEV;
2501                        goto done;
2502                }
2503                /* Here, I used to disable the media-bay on comet. It
2504                 * appears this is wrong, the floppy connector is actually
2505                 * a kind of media-bay and works with the current driver.
2506                 */
2507                if (__raw_readl(mach_id_ptr) & 0x20000000UL)
2508                        pmac_mb.model_id = PMAC_TYPE_COMET;
2509                iounmap(mach_id_ptr);
2510        }
2511
2512        /* Set default value of powersave_nap on machines that support it.
2513         * It appears that uninorth rev 3 has a problem with it, we don't
2514         * enable it on those. In theory, the flush-on-lock property is
2515         * supposed to be set when not supported, but I'm not very confident
2516         * that all Apple OF revs did it properly, I do it the paranoid way.
2517         */
2518        while (uninorth_base && uninorth_rev > 3) {
2519                struct device_node *cpus = of_find_node_by_path("/cpus");
2520                struct device_node *np;
2521
2522                if (!cpus || !cpus->child) {
2523                        printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
2524                        of_node_put(cpus);
2525                        break;
2526                }
2527                np = cpus->child;
2528                /* Nap mode not supported on SMP */
2529                if (np->sibling) {
2530                        of_node_put(cpus);
2531                        break;
2532                }
2533                /* Nap mode not supported if flush-on-lock property is present */
2534                if (of_get_property(np, "flush-on-lock", NULL)) {
2535                        of_node_put(cpus);
2536                        break;
2537                }
2538                of_node_put(cpus);
2539                powersave_nap = 1;
2540                printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
2541                break;
2542        }
2543
2544        /* On CPUs that support it (750FX), lowspeed by default during
2545         * NAP mode
2546         */
2547        powersave_lowspeed = 1;
2548
2549#else /* CONFIG_PPC64 */
2550        powersave_nap = 1;
2551#endif  /* CONFIG_PPC64 */
2552
2553        /* Check for "mobile" machine */
2554        if (model && (strncmp(model, "PowerBook", 9) == 0
2555                   || strncmp(model, "iBook", 5) == 0))
2556                pmac_mb.board_flags |= PMAC_MB_MOBILE;
2557
2558
2559        printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
2560done:
2561        of_node_put(dt);
2562        return ret;
2563}
2564
2565/* Initialize the Core99 UniNorth host bridge and memory controller
2566 */
2567static void __init probe_uninorth(void)
2568{
2569        const u32 *addrp;
2570        phys_addr_t address;
2571        unsigned long actrl;
2572
2573        /* Locate core99 Uni-N */
2574        uninorth_node = of_find_node_by_name(NULL, "uni-n");
2575        uninorth_maj = 1;
2576
2577        /* Locate G5 u3 */
2578        if (uninorth_node == NULL) {
2579                uninorth_node = of_find_node_by_name(NULL, "u3");
2580                uninorth_maj = 3;
2581        }
2582        /* Locate G5 u4 */
2583        if (uninorth_node == NULL) {
2584                uninorth_node = of_find_node_by_name(NULL, "u4");
2585                uninorth_maj = 4;
2586        }
2587        if (uninorth_node == NULL) {
2588                uninorth_maj = 0;
2589                return;
2590        }
2591
2592        addrp = of_get_property(uninorth_node, "reg", NULL);
2593        if (addrp == NULL)
2594                return;
2595        address = of_translate_address(uninorth_node, addrp);
2596        if (address == 0)
2597                return;
2598        uninorth_base = ioremap(address, 0x40000);
2599        if (uninorth_base == NULL)
2600                return;
2601        uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
2602        if (uninorth_maj == 3 || uninorth_maj == 4) {
2603                u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
2604                if (u3_ht_base == NULL) {
2605                        iounmap(uninorth_base);
2606                        return;
2607                }
2608        }
2609
2610        printk(KERN_INFO "Found %s memory controller & host bridge"
2611               " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
2612               uninorth_maj == 4 ? "U4" : "UniNorth",
2613               (unsigned int)address, uninorth_rev);
2614        printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
2615
2616        /* Set the arbitrer QAck delay according to what Apple does
2617         */
2618        if (uninorth_rev < 0x11) {
2619                actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
2620                actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
2621                        UNI_N_ARB_CTRL_QACK_DELAY) <<
2622                        UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
2623                UN_OUT(UNI_N_ARB_CTRL, actrl);
2624        }
2625
2626        /* Some more magic as done by them in recent MacOS X on UniNorth
2627         * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
2628         * memory timeout
2629         */
2630        if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
2631            uninorth_rev == 0xc0)
2632                UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
2633}
2634
2635static void __init probe_one_macio(const char *name, const char *compat, int type)
2636{
2637        struct device_node*     node;
2638        int                     i;
2639        volatile u32 __iomem    *base;
2640        const u32               *addrp, *revp;
2641        phys_addr_t             addr;
2642        u64                     size;
2643
2644        for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
2645                if (!compat)
2646                        break;
2647                if (of_device_is_compatible(node, compat))
2648                        break;
2649        }
2650        if (!node)
2651                return;
2652        for(i=0; i<MAX_MACIO_CHIPS; i++) {
2653                if (!macio_chips[i].of_node)
2654                        break;
2655                if (macio_chips[i].of_node == node)
2656                        return;
2657        }
2658
2659        if (i >= MAX_MACIO_CHIPS) {
2660                printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
2661                printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
2662                return;
2663        }
2664        addrp = of_get_pci_address(node, 0, &size, NULL);
2665        if (addrp == NULL) {
2666                printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
2667                       node->full_name);
2668                return;
2669        }
2670        addr = of_translate_address(node, addrp);
2671        if (addr == 0) {
2672                printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
2673                       node->full_name);
2674                return;
2675        }
2676        base = ioremap(addr, (unsigned long)size);
2677        if (!base) {
2678                printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
2679                       node->full_name);
2680                return;
2681        }
2682        if (type == macio_keylargo || type == macio_keylargo2) {
2683                const u32 *did = of_get_property(node, "device-id", NULL);
2684                if (*did == 0x00000025)
2685                        type = macio_pangea;
2686                if (*did == 0x0000003e)
2687                        type = macio_intrepid;
2688                if (*did == 0x0000004f)
2689                        type = macio_shasta;
2690        }
2691        macio_chips[i].of_node  = node;
2692        macio_chips[i].type     = type;
2693        macio_chips[i].base     = base;
2694        macio_chips[i].flags    = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
2695        macio_chips[i].name     = macio_names[type];
2696        revp = of_get_property(node, "revision-id", NULL);
2697        if (revp)
2698                macio_chips[i].rev = *revp;
2699        printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
2700                macio_names[type], macio_chips[i].rev, macio_chips[i].base);
2701}
2702
2703static int __init
2704probe_macios(void)
2705{
2706        /* Warning, ordering is important */
2707        probe_one_macio("gc", NULL, macio_grand_central);
2708        probe_one_macio("ohare", NULL, macio_ohare);
2709        probe_one_macio("pci106b,7", NULL, macio_ohareII);
2710        probe_one_macio("mac-io", "keylargo", macio_keylargo);
2711        probe_one_macio("mac-io", "paddington", macio_paddington);
2712        probe_one_macio("mac-io", "gatwick", macio_gatwick);
2713        probe_one_macio("mac-io", "heathrow", macio_heathrow);
2714        probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
2715
2716        /* Make sure the "main" macio chip appear first */
2717        if (macio_chips[0].type == macio_gatwick
2718            && macio_chips[1].type == macio_heathrow) {
2719                struct macio_chip temp = macio_chips[0];
2720                macio_chips[0] = macio_chips[1];
2721                macio_chips[1] = temp;
2722        }
2723        if (macio_chips[0].type == macio_ohareII
2724            && macio_chips[1].type == macio_ohare) {
2725                struct macio_chip temp = macio_chips[0];
2726                macio_chips[0] = macio_chips[1];
2727                macio_chips[1] = temp;
2728        }
2729        macio_chips[0].lbus.index = 0;
2730        macio_chips[1].lbus.index = 1;
2731
2732        return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
2733}
2734
2735static void __init
2736initial_serial_shutdown(struct device_node *np)
2737{
2738        int len;
2739        const struct slot_names_prop {
2740                int     count;
2741                char    name[1];
2742        } *slots;
2743        const char *conn;
2744        int port_type = PMAC_SCC_ASYNC;
2745        int modem = 0;
2746
2747        slots = of_get_property(np, "slot-names", &len);
2748        conn = of_get_property(np, "AAPL,connector", &len);
2749        if (conn && (strcmp(conn, "infrared") == 0))
2750                port_type = PMAC_SCC_IRDA;
2751        else if (of_device_is_compatible(np, "cobalt"))
2752                modem = 1;
2753        else if (slots && slots->count > 0) {
2754                if (strcmp(slots->name, "IrDA") == 0)
2755                        port_type = PMAC_SCC_IRDA;
2756                else if (strcmp(slots->name, "Modem") == 0)
2757                        modem = 1;
2758        }
2759        if (modem)
2760                pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
2761        pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
2762}
2763
2764static void __init
2765set_initial_features(void)
2766{
2767        struct device_node *np;
2768
2769        /* That hack appears to be necessary for some StarMax motherboards
2770         * but I'm not too sure it was audited for side-effects on other
2771         * ohare based machines...
2772         * Since I still have difficulties figuring the right way to
2773         * differentiate them all and since that hack was there for a long
2774         * time, I'll keep it around
2775         */
2776        if (macio_chips[0].type == macio_ohare) {
2777                struct macio_chip *macio = &macio_chips[0];
2778                np = of_find_node_by_name(NULL, "via-pmu");
2779                if (np)
2780                        MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
2781                else
2782                        MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
2783                of_node_put(np);
2784        } else if (macio_chips[1].type == macio_ohare) {
2785                struct macio_chip *macio = &macio_chips[1];
2786                MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
2787        }
2788
2789#ifdef CONFIG_PPC64
2790        if (macio_chips[0].type == macio_keylargo2 ||
2791            macio_chips[0].type == macio_shasta) {
2792#ifndef CONFIG_SMP
2793                /* On SMP machines running UP, we have the second CPU eating
2794                 * bus cycles. We need to take it off the bus. This is done
2795                 * from pmac_smp for SMP kernels running on one CPU
2796                 */
2797                np = of_find_node_by_type(NULL, "cpu");
2798                if (np != NULL)
2799                        np = of_find_node_by_type(np, "cpu");
2800                if (np != NULL) {
2801                        g5_phy_disable_cpu1();
2802                        of_node_put(np);
2803                }
2804#endif /* CONFIG_SMP */
2805                /* Enable GMAC for now for PCI probing. It will be disabled
2806                 * later on after PCI probe
2807                 */
2808                for_each_node_by_name(np, "ethernet")
2809                        if (of_device_is_compatible(np, "K2-GMAC"))
2810                                g5_gmac_enable(np, 0, 1);
2811
2812                /* Enable FW before PCI probe. Will be disabled later on
2813                 * Note: We should have a batter way to check that we are
2814                 * dealing with uninorth internal cell and not a PCI cell
2815                 * on the external PCI. The code below works though.
2816                 */
2817                for_each_node_by_name(np, "firewire") {
2818                        if (of_device_is_compatible(np, "pci106b,5811")) {
2819                                macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
2820                                g5_fw_enable(np, 0, 1);
2821                        }
2822                }
2823        }
2824#else /* CONFIG_PPC64 */
2825
2826        if (macio_chips[0].type == macio_keylargo ||
2827            macio_chips[0].type == macio_pangea ||
2828            macio_chips[0].type == macio_intrepid) {
2829                /* Enable GMAC for now for PCI probing. It will be disabled
2830                 * later on after PCI probe
2831                 */
2832                for_each_node_by_name(np, "ethernet") {
2833                        if (np->parent
2834                            && of_device_is_compatible(np->parent, "uni-north")
2835                            && of_device_is_compatible(np, "gmac"))
2836                                core99_gmac_enable(np, 0, 1);
2837                }
2838
2839                /* Enable FW before PCI probe. Will be disabled later on
2840                 * Note: We should have a batter way to check that we are
2841                 * dealing with uninorth internal cell and not a PCI cell
2842                 * on the external PCI. The code below works though.
2843                 */
2844                for_each_node_by_name(np, "firewire") {
2845                        if (np->parent
2846                            && of_device_is_compatible(np->parent, "uni-north")
2847                            && (of_device_is_compatible(np, "pci106b,18") ||
2848                                of_device_is_compatible(np, "pci106b,30") ||
2849                                of_device_is_compatible(np, "pci11c1,5811"))) {
2850                                macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
2851                                core99_firewire_enable(np, 0, 1);
2852                        }
2853                }
2854
2855                /* Enable ATA-100 before PCI probe. */
2856                np = of_find_node_by_name(NULL, "ata-6");
2857                for_each_node_by_name(np, "ata-6") {
2858                        if (np->parent
2859                            && of_device_is_compatible(np->parent, "uni-north")
2860                            && of_device_is_compatible(np, "kauai-ata")) {
2861                                core99_ata100_enable(np, 1);
2862                        }
2863                }
2864
2865                /* Switch airport off */
2866                for_each_node_by_name(np, "radio") {
2867                        if (np->parent == macio_chips[0].of_node) {
2868                                macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
2869                                core99_airport_enable(np, 0, 0);
2870                        }
2871                }
2872        }
2873
2874        /* On all machines that support sound PM, switch sound off */
2875        if (macio_chips[0].of_node)
2876                pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
2877                        macio_chips[0].of_node, 0, 0);
2878
2879        /* While on some desktop G3s, we turn it back on */
2880        if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
2881                && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
2882                    pmac_mb.model_id == PMAC_TYPE_SILK)) {
2883                struct macio_chip *macio = &macio_chips[0];
2884                MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
2885                MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
2886        }
2887
2888#endif /* CONFIG_PPC64 */
2889
2890        /* On all machines, switch modem & serial ports off */
2891        for_each_node_by_name(np, "ch-a")
2892                initial_serial_shutdown(np);
2893        of_node_put(np);
2894        for_each_node_by_name(np, "ch-b")
2895                initial_serial_shutdown(np);
2896        of_node_put(np);
2897}
2898
2899void __init
2900pmac_feature_init(void)
2901{
2902        /* Detect the UniNorth memory controller */
2903        probe_uninorth();
2904
2905        /* Probe mac-io controllers */
2906        if (probe_macios()) {
2907                printk(KERN_WARNING "No mac-io chip found\n");
2908                return;
2909        }
2910
2911        /* Probe machine type */
2912        if (probe_motherboard())
2913                printk(KERN_WARNING "Unknown PowerMac !\n");
2914
2915        /* Set some initial features (turn off some chips that will
2916         * be later turned on)
2917         */
2918        set_initial_features();
2919}
2920
2921#if 0
2922static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
2923{
2924        int     freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
2925        int     bits[8] = { 8,16,0,32,2,4,0,0 };
2926        int     freq = (frq >> 8) & 0xf;
2927
2928        if (freqs[freq] == 0)
2929                printk("%s: Unknown HT link frequency %x\n", name, freq);
2930        else
2931                printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
2932                       name, freqs[freq],
2933                       bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
2934}
2935
2936void __init pmac_check_ht_link(void)
2937{
2938        u32     ufreq, freq, ucfg, cfg;
2939        struct device_node *pcix_node;
2940        u8      px_bus, px_devfn;
2941        struct pci_controller *px_hose;
2942
2943        (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
2944        ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
2945        ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
2946        dump_HT_speeds("U3 HyperTransport", cfg, freq);
2947
2948        pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
2949        if (pcix_node == NULL) {
2950                printk("No PCI-X bridge found\n");
2951                return;
2952        }
2953        if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
2954                printk("PCI-X bridge found but not matched to pci\n");
2955                return;
2956        }
2957        px_hose = pci_find_hose_for_OF_device(pcix_node);
2958        if (px_hose == NULL) {
2959                printk("PCI-X bridge found but not matched to host\n");
2960                return;
2961        }       
2962        early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
2963        early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
2964        dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
2965        early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
2966        early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
2967        dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
2968}
2969#endif /* 0 */
2970
2971/*
2972 * Early video resume hook
2973 */
2974
2975static void (*pmac_early_vresume_proc)(void *data);
2976static void *pmac_early_vresume_data;
2977
2978void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
2979{
2980        if (!machine_is(powermac))
2981                return;
2982        preempt_disable();
2983        pmac_early_vresume_proc = proc;
2984        pmac_early_vresume_data = data;
2985        preempt_enable();
2986}
2987EXPORT_SYMBOL(pmac_set_early_video_resume);
2988
2989void pmac_call_early_video_resume(void)
2990{
2991        if (pmac_early_vresume_proc)
2992                pmac_early_vresume_proc(pmac_early_vresume_data);
2993}
2994
2995/*
2996 * AGP related suspend/resume code
2997 */
2998
2999static struct pci_dev *pmac_agp_bridge;
3000static int (*pmac_agp_suspend)(struct pci_dev *bridge);
3001static int (*pmac_agp_resume)(struct pci_dev *bridge);
3002
3003void pmac_register_agp_pm(struct pci_dev *bridge,
3004                                 int (*suspend)(struct pci_dev *bridge),
3005                                 int (*resume)(struct pci_dev *bridge))
3006{
3007        if (suspend || resume) {
3008                pmac_agp_bridge = bridge;
3009                pmac_agp_suspend = suspend;
3010                pmac_agp_resume = resume;
3011                return;
3012        }
3013        if (bridge != pmac_agp_bridge)
3014                return;
3015        pmac_agp_suspend = pmac_agp_resume = NULL;
3016        return;
3017}
3018EXPORT_SYMBOL(pmac_register_agp_pm);
3019
3020void pmac_suspend_agp_for_card(struct pci_dev *dev)
3021{
3022        if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
3023                return;
3024        if (pmac_agp_bridge->bus != dev->bus)
3025                return;
3026        pmac_agp_suspend(pmac_agp_bridge);
3027}
3028EXPORT_SYMBOL(pmac_suspend_agp_for_card);
3029
3030void pmac_resume_agp_for_card(struct pci_dev *dev)
3031{
3032        if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
3033                return;
3034        if (pmac_agp_bridge->bus != dev->bus)
3035                return;
3036        pmac_agp_resume(pmac_agp_bridge);
3037}
3038EXPORT_SYMBOL(pmac_resume_agp_for_card);
3039
3040int pmac_get_uninorth_variant(void)
3041{
3042        return uninorth_maj;
3043}
3044