linux/drivers/acpi/acpica/utownerid.c
<<
>>
Prefs
   1/*******************************************************************************
   2 *
   3 * Module Name: utownerid - Support for Table/Method Owner IDs
   4 *
   5 ******************************************************************************/
   6
   7/*
   8 * Copyright (C) 2000 - 2016, Intel Corp.
   9 * All rights reserved.
  10 *
  11 * Redistribution and use in source and binary forms, with or without
  12 * modification, are permitted provided that the following conditions
  13 * are met:
  14 * 1. Redistributions of source code must retain the above copyright
  15 *    notice, this list of conditions, and the following disclaimer,
  16 *    without modification.
  17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18 *    substantially similar to the "NO WARRANTY" disclaimer below
  19 *    ("Disclaimer") and any redistribution must be conditioned upon
  20 *    including a substantially similar Disclaimer requirement for further
  21 *    binary redistribution.
  22 * 3. Neither the names of the above-listed copyright holders nor the names
  23 *    of any contributors may be used to endorse or promote products derived
  24 *    from this software without specific prior written permission.
  25 *
  26 * Alternatively, this software may be distributed under the terms of the
  27 * GNU General Public License ("GPL") version 2 as published by the Free
  28 * Software Foundation.
  29 *
  30 * NO WARRANTY
  31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41 * POSSIBILITY OF SUCH DAMAGES.
  42 */
  43
  44#include <acpi/acpi.h>
  45#include "accommon.h"
  46#include "acnamesp.h"
  47
  48#define _COMPONENT          ACPI_UTILITIES
  49ACPI_MODULE_NAME("utownerid")
  50
  51/*******************************************************************************
  52 *
  53 * FUNCTION:    acpi_ut_allocate_owner_id
  54 *
  55 * PARAMETERS:  owner_id        - Where the new owner ID is returned
  56 *
  57 * RETURN:      Status
  58 *
  59 * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
  60 *              track objects created by the table or method, to be deleted
  61 *              when the method exits or the table is unloaded.
  62 *
  63 ******************************************************************************/
  64acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
  65{
  66        u32 i;
  67        u32 j;
  68        u32 k;
  69        acpi_status status;
  70
  71        ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
  72
  73        /* Guard against multiple allocations of ID to the same location */
  74
  75        if (*owner_id) {
  76                ACPI_ERROR((AE_INFO,
  77                            "Owner ID [0x%2.2X] already exists", *owner_id));
  78                return_ACPI_STATUS(AE_ALREADY_EXISTS);
  79        }
  80
  81        /* Mutex for the global ID mask */
  82
  83        status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
  84        if (ACPI_FAILURE(status)) {
  85                return_ACPI_STATUS(status);
  86        }
  87
  88        /*
  89         * Find a free owner ID, cycle through all possible IDs on repeated
  90         * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index
  91         * may have to be scanned twice.
  92         */
  93        for (i = 0, j = acpi_gbl_last_owner_id_index;
  94             i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
  95                if (j >= ACPI_NUM_OWNERID_MASKS) {
  96                        j = 0;  /* Wraparound to start of mask array */
  97                }
  98
  99                for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
 100                        if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
 101
 102                                /* There are no free IDs in this mask */
 103
 104                                break;
 105                        }
 106
 107                        if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
 108                                /*
 109                                 * Found a free ID. The actual ID is the bit index plus one,
 110                                 * making zero an invalid Owner ID. Save this as the last ID
 111                                 * allocated and update the global ID mask.
 112                                 */
 113                                acpi_gbl_owner_id_mask[j] |= (1 << k);
 114
 115                                acpi_gbl_last_owner_id_index = (u8)j;
 116                                acpi_gbl_next_owner_id_offset = (u8)(k + 1);
 117
 118                                /*
 119                                 * Construct encoded ID from the index and bit position
 120                                 *
 121                                 * Note: Last [j].k (bit 255) is never used and is marked
 122                                 * permanently allocated (prevents +1 overflow)
 123                                 */
 124                                *owner_id =
 125                                    (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
 126
 127                                ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
 128                                                  "Allocated OwnerId: %2.2X\n",
 129                                                  (unsigned int)*owner_id));
 130                                goto exit;
 131                        }
 132                }
 133
 134                acpi_gbl_next_owner_id_offset = 0;
 135        }
 136
 137        /*
 138         * All owner_ids have been allocated. This typically should
 139         * not happen since the IDs are reused after deallocation. The IDs are
 140         * allocated upon table load (one per table) and method execution, and
 141         * they are released when a table is unloaded or a method completes
 142         * execution.
 143         *
 144         * If this error happens, there may be very deep nesting of invoked
 145         * control methods, or there may be a bug where the IDs are not released.
 146         */
 147        status = AE_OWNER_ID_LIMIT;
 148        ACPI_ERROR((AE_INFO,
 149                    "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
 150
 151exit:
 152        (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
 153        return_ACPI_STATUS(status);
 154}
 155
 156/*******************************************************************************
 157 *
 158 * FUNCTION:    acpi_ut_release_owner_id
 159 *
 160 * PARAMETERS:  owner_id_ptr        - Pointer to a previously allocated owner_ID
 161 *
 162 * RETURN:      None. No error is returned because we are either exiting a
 163 *              control method or unloading a table. Either way, we would
 164 *              ignore any error anyway.
 165 *
 166 * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
 167 *
 168 ******************************************************************************/
 169
 170void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
 171{
 172        acpi_owner_id owner_id = *owner_id_ptr;
 173        acpi_status status;
 174        u32 index;
 175        u32 bit;
 176
 177        ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
 178
 179        /* Always clear the input owner_id (zero is an invalid ID) */
 180
 181        *owner_id_ptr = 0;
 182
 183        /* Zero is not a valid owner_ID */
 184
 185        if (owner_id == 0) {
 186                ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
 187                return_VOID;
 188        }
 189
 190        /* Mutex for the global ID mask */
 191
 192        status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
 193        if (ACPI_FAILURE(status)) {
 194                return_VOID;
 195        }
 196
 197        /* Normalize the ID to zero */
 198
 199        owner_id--;
 200
 201        /* Decode ID to index/offset pair */
 202
 203        index = ACPI_DIV_32(owner_id);
 204        bit = 1 << ACPI_MOD_32(owner_id);
 205
 206        /* Free the owner ID only if it is valid */
 207
 208        if (acpi_gbl_owner_id_mask[index] & bit) {
 209                acpi_gbl_owner_id_mask[index] ^= bit;
 210        } else {
 211                ACPI_ERROR((AE_INFO,
 212                            "Release of non-allocated OwnerId: 0x%2.2X",
 213                            owner_id + 1));
 214        }
 215
 216        (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
 217        return_VOID;
 218}
 219