linux/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
<<
>>
Prefs
   1/*
   2  This file is provided under a dual BSD/GPLv2 license.  When using or
   3  redistributing this file, you may do so under either license.
   4
   5  GPL LICENSE SUMMARY
   6  Copyright(c) 2014 Intel Corporation.
   7  This program is free software; you can redistribute it and/or modify
   8  it under the terms of version 2 of the GNU General Public License as
   9  published by the Free Software Foundation.
  10
  11  This program is distributed in the hope that it will be useful, but
  12  WITHOUT ANY WARRANTY; without even the implied warranty of
  13  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  General Public License for more details.
  15
  16  Contact Information:
  17  qat-linux@intel.com
  18
  19  BSD LICENSE
  20  Copyright(c) 2014 Intel Corporation.
  21  Redistribution and use in source and binary forms, with or without
  22  modification, are permitted provided that the following conditions
  23  are met:
  24
  25    * Redistributions of source code must retain the above copyright
  26      notice, this list of conditions and the following disclaimer.
  27    * Redistributions in binary form must reproduce the above copyright
  28      notice, this list of conditions and the following disclaimer in
  29      the documentation and/or other materials provided with the
  30      distribution.
  31    * Neither the name of Intel Corporation nor the names of its
  32      contributors may be used to endorse or promote products derived
  33      from this software without specific prior written permission.
  34
  35  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  36  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  37  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  38  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  39  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  40  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  41  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  42  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  43  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  44  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  45  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  46*/
  47#include <linux/kernel.h>
  48#include <linux/module.h>
  49#include <linux/pci.h>
  50#include <linux/init.h>
  51#include <linux/types.h>
  52#include <linux/fs.h>
  53#include <linux/slab.h>
  54#include <linux/errno.h>
  55#include <linux/device.h>
  56#include <linux/dma-mapping.h>
  57#include <linux/platform_device.h>
  58#include <linux/workqueue.h>
  59#include <linux/io.h>
  60#include <adf_accel_devices.h>
  61#include <adf_common_drv.h>
  62#include <adf_cfg.h>
  63#include "adf_dh895xcc_hw_data.h"
  64
  65#define ADF_SYSTEM_DEVICE(device_id) \
  66        {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  67
  68static const struct pci_device_id adf_pci_tbl[] = {
  69        ADF_SYSTEM_DEVICE(ADF_DH895XCC_PCI_DEVICE_ID),
  70        {0,}
  71};
  72MODULE_DEVICE_TABLE(pci, adf_pci_tbl);
  73
  74static int adf_probe(struct pci_dev *dev, const struct pci_device_id *ent);
  75static void adf_remove(struct pci_dev *dev);
  76
  77static struct pci_driver adf_driver = {
  78        .id_table = adf_pci_tbl,
  79        .name = ADF_DH895XCC_DEVICE_NAME,
  80        .probe = adf_probe,
  81        .remove = adf_remove,
  82        .sriov_configure = adf_sriov_configure,
  83};
  84
  85static void adf_cleanup_pci_dev(struct adf_accel_dev *accel_dev)
  86{
  87        pci_release_regions(accel_dev->accel_pci_dev.pci_dev);
  88        pci_disable_device(accel_dev->accel_pci_dev.pci_dev);
  89}
  90
  91static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
  92{
  93        struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev;
  94        int i;
  95
  96        for (i = 0; i < ADF_PCI_MAX_BARS; i++) {
  97                struct adf_bar *bar = &accel_pci_dev->pci_bars[i];
  98
  99                if (bar->virt_addr)
 100                        pci_iounmap(accel_pci_dev->pci_dev, bar->virt_addr);
 101        }
 102
 103        if (accel_dev->hw_device) {
 104                switch (accel_pci_dev->pci_dev->device) {
 105                case ADF_DH895XCC_PCI_DEVICE_ID:
 106                        adf_clean_hw_data_dh895xcc(accel_dev->hw_device);
 107                        break;
 108                default:
 109                        break;
 110                }
 111                kfree(accel_dev->hw_device);
 112                accel_dev->hw_device = NULL;
 113        }
 114        adf_cfg_dev_remove(accel_dev);
 115        debugfs_remove(accel_dev->debugfs_dir);
 116        adf_devmgr_rm_dev(accel_dev, NULL);
 117}
 118
 119static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 120{
 121        struct adf_accel_dev *accel_dev;
 122        struct adf_accel_pci *accel_pci_dev;
 123        struct adf_hw_device_data *hw_data;
 124        char name[ADF_DEVICE_NAME_LENGTH];
 125        unsigned int i, bar_nr;
 126        int ret, bar_mask;
 127
 128        switch (ent->device) {
 129        case ADF_DH895XCC_PCI_DEVICE_ID:
 130                break;
 131        default:
 132                dev_err(&pdev->dev, "Invalid device 0x%x.\n", ent->device);
 133                return -ENODEV;
 134        }
 135
 136        if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
 137                /* If the accelerator is connected to a node with no memory
 138                 * there is no point in using the accelerator since the remote
 139                 * memory transaction will be very slow. */
 140                dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
 141                return -EINVAL;
 142        }
 143
 144        accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
 145                                 dev_to_node(&pdev->dev));
 146        if (!accel_dev)
 147                return -ENOMEM;
 148
 149        INIT_LIST_HEAD(&accel_dev->crypto_list);
 150        accel_pci_dev = &accel_dev->accel_pci_dev;
 151        accel_pci_dev->pci_dev = pdev;
 152
 153        /* Add accel device to accel table.
 154         * This should be called before adf_cleanup_accel is called */
 155        if (adf_devmgr_add_dev(accel_dev, NULL)) {
 156                dev_err(&pdev->dev, "Failed to add new accelerator device.\n");
 157                kfree(accel_dev);
 158                return -EFAULT;
 159        }
 160
 161        accel_dev->owner = THIS_MODULE;
 162        /* Allocate and configure device configuration structure */
 163        hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
 164                               dev_to_node(&pdev->dev));
 165        if (!hw_data) {
 166                ret = -ENOMEM;
 167                goto out_err;
 168        }
 169
 170        accel_dev->hw_device = hw_data;
 171        adf_init_hw_data_dh895xcc(accel_dev->hw_device);
 172        pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid);
 173        pci_read_config_dword(pdev, ADF_DEVICE_FUSECTL_OFFSET,
 174                              &hw_data->fuses);
 175
 176        /* Get Accelerators and Accelerators Engines masks */
 177        hw_data->accel_mask = hw_data->get_accel_mask(hw_data->fuses);
 178        hw_data->ae_mask = hw_data->get_ae_mask(hw_data->fuses);
 179        accel_pci_dev->sku = hw_data->get_sku(hw_data);
 180        /* If the device has no acceleration engines then ignore it. */
 181        if (!hw_data->accel_mask || !hw_data->ae_mask ||
 182            ((~hw_data->ae_mask) & 0x01)) {
 183                dev_err(&pdev->dev, "No acceleration units found");
 184                ret = -EFAULT;
 185                goto out_err;
 186        }
 187
 188        /* Create dev top level debugfs entry */
 189        snprintf(name, sizeof(name), "%s%s_%02x:%02d.%02d",
 190                 ADF_DEVICE_NAME_PREFIX, hw_data->dev_class->name,
 191                 pdev->bus->number, PCI_SLOT(pdev->devfn),
 192                 PCI_FUNC(pdev->devfn));
 193
 194        accel_dev->debugfs_dir = debugfs_create_dir(name, NULL);
 195        if (!accel_dev->debugfs_dir) {
 196                dev_err(&pdev->dev, "Could not create debugfs dir %s\n", name);
 197                ret = -EINVAL;
 198                goto out_err;
 199        }
 200
 201        /* Create device configuration table */
 202        ret = adf_cfg_dev_add(accel_dev);
 203        if (ret)
 204                goto out_err;
 205
 206        pcie_set_readrq(pdev, 1024);
 207
 208        /* enable PCI device */
 209        if (pci_enable_device(pdev)) {
 210                ret = -EFAULT;
 211                goto out_err;
 212        }
 213
 214        /* set dma identifier */
 215        if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 216                if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
 217                        dev_err(&pdev->dev, "No usable DMA configuration\n");
 218                        ret = -EFAULT;
 219                        goto out_err_disable;
 220                } else {
 221                        pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 222                }
 223
 224        } else {
 225                pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 226        }
 227
 228        if (pci_request_regions(pdev, ADF_DH895XCC_DEVICE_NAME)) {
 229                ret = -EFAULT;
 230                goto out_err_disable;
 231        }
 232
 233        /* Read accelerator capabilities mask */
 234        pci_read_config_dword(pdev, ADF_DEVICE_LEGFUSE_OFFSET,
 235                              &hw_data->accel_capabilities_mask);
 236
 237        /* Find and map all the device's BARS */
 238        i = 0;
 239        bar_mask = pci_select_bars(pdev, IORESOURCE_MEM);
 240        for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask,
 241                         ADF_PCI_MAX_BARS * 2) {
 242                struct adf_bar *bar = &accel_pci_dev->pci_bars[i++];
 243
 244                bar->base_addr = pci_resource_start(pdev, bar_nr);
 245                if (!bar->base_addr)
 246                        break;
 247                bar->size = pci_resource_len(pdev, bar_nr);
 248                bar->virt_addr = pci_iomap(accel_pci_dev->pci_dev, bar_nr, 0);
 249                if (!bar->virt_addr) {
 250                        dev_err(&pdev->dev, "Failed to map BAR %d\n", bar_nr);
 251                        ret = -EFAULT;
 252                        goto out_err_free_reg;
 253                }
 254        }
 255        pci_set_master(pdev);
 256
 257        if (adf_enable_aer(accel_dev, &adf_driver)) {
 258                dev_err(&pdev->dev, "Failed to enable aer\n");
 259                ret = -EFAULT;
 260                goto out_err_free_reg;
 261        }
 262
 263        if (pci_save_state(pdev)) {
 264                dev_err(&pdev->dev, "Failed to save pci state\n");
 265                ret = -ENOMEM;
 266                goto out_err_free_reg;
 267        }
 268
 269        ret = qat_crypto_dev_config(accel_dev);
 270        if (ret)
 271                goto out_err_free_reg;
 272
 273        ret = adf_dev_init(accel_dev);
 274        if (ret)
 275                goto out_err_dev_shutdown;
 276
 277        ret = adf_dev_start(accel_dev);
 278        if (ret)
 279                goto out_err_dev_stop;
 280
 281        return ret;
 282
 283out_err_dev_stop:
 284        adf_dev_stop(accel_dev);
 285out_err_dev_shutdown:
 286        adf_dev_shutdown(accel_dev);
 287out_err_free_reg:
 288        pci_release_regions(accel_pci_dev->pci_dev);
 289out_err_disable:
 290        pci_disable_device(accel_pci_dev->pci_dev);
 291out_err:
 292        adf_cleanup_accel(accel_dev);
 293        kfree(accel_dev);
 294        return ret;
 295}
 296
 297static void adf_remove(struct pci_dev *pdev)
 298{
 299        struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
 300
 301        if (!accel_dev) {
 302                pr_err("QAT: Driver removal failed\n");
 303                return;
 304        }
 305        if (adf_dev_stop(accel_dev))
 306                dev_err(&GET_DEV(accel_dev), "Failed to stop QAT accel dev\n");
 307
 308        adf_dev_shutdown(accel_dev);
 309        adf_disable_aer(accel_dev);
 310        adf_cleanup_accel(accel_dev);
 311        adf_cleanup_pci_dev(accel_dev);
 312        kfree(accel_dev);
 313}
 314
 315static int __init adfdrv_init(void)
 316{
 317        request_module("intel_qat");
 318
 319        if (pci_register_driver(&adf_driver)) {
 320                pr_err("QAT: Driver initialization failed\n");
 321                return -EFAULT;
 322        }
 323        return 0;
 324}
 325
 326static void __exit adfdrv_release(void)
 327{
 328        pci_unregister_driver(&adf_driver);
 329}
 330
 331module_init(adfdrv_init);
 332module_exit(adfdrv_release);
 333
 334MODULE_LICENSE("Dual BSD/GPL");
 335MODULE_AUTHOR("Intel");
 336MODULE_FIRMWARE(ADF_DH895XCC_FW);
 337MODULE_DESCRIPTION("Intel(R) QuickAssist Technology");
 338MODULE_VERSION(ADF_DRV_VERSION);
 339