linux/drivers/dma/coh901318.c
<<
>>
Prefs
   1/*
   2 * driver/dma/coh901318.c
   3 *
   4 * Copyright (C) 2007-2009 ST-Ericsson
   5 * License terms: GNU General Public License (GPL) version 2
   6 * DMA driver for COH 901 318
   7 * Author: Per Friden <per.friden@stericsson.com>
   8 */
   9
  10#include <linux/init.h>
  11#include <linux/module.h>
  12#include <linux/kernel.h> /* printk() */
  13#include <linux/fs.h> /* everything... */
  14#include <linux/scatterlist.h>
  15#include <linux/slab.h> /* kmalloc() */
  16#include <linux/dmaengine.h>
  17#include <linux/platform_device.h>
  18#include <linux/device.h>
  19#include <linux/irqreturn.h>
  20#include <linux/interrupt.h>
  21#include <linux/io.h>
  22#include <linux/uaccess.h>
  23#include <linux/debugfs.h>
  24#include <linux/platform_data/dma-coh901318.h>
  25#include <linux/of_dma.h>
  26
  27#include "coh901318.h"
  28#include "dmaengine.h"
  29
  30#define COH901318_MOD32_MASK                                    (0x1F)
  31#define COH901318_WORD_MASK                                     (0xFFFFFFFF)
  32/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
  33#define COH901318_INT_STATUS1                                   (0x0000)
  34#define COH901318_INT_STATUS2                                   (0x0004)
  35/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
  36#define COH901318_TC_INT_STATUS1                                (0x0008)
  37#define COH901318_TC_INT_STATUS2                                (0x000C)
  38/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
  39#define COH901318_TC_INT_CLEAR1                                 (0x0010)
  40#define COH901318_TC_INT_CLEAR2                                 (0x0014)
  41/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
  42#define COH901318_RAW_TC_INT_STATUS1                            (0x0018)
  43#define COH901318_RAW_TC_INT_STATUS2                            (0x001C)
  44/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
  45#define COH901318_BE_INT_STATUS1                                (0x0020)
  46#define COH901318_BE_INT_STATUS2                                (0x0024)
  47/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
  48#define COH901318_BE_INT_CLEAR1                                 (0x0028)
  49#define COH901318_BE_INT_CLEAR2                                 (0x002C)
  50/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
  51#define COH901318_RAW_BE_INT_STATUS1                            (0x0030)
  52#define COH901318_RAW_BE_INT_STATUS2                            (0x0034)
  53
  54/*
  55 * CX_CFG - Channel Configuration Registers 32bit (R/W)
  56 */
  57#define COH901318_CX_CFG                                        (0x0100)
  58#define COH901318_CX_CFG_SPACING                                (0x04)
  59/* Channel enable activates tha dma job */
  60#define COH901318_CX_CFG_CH_ENABLE                              (0x00000001)
  61#define COH901318_CX_CFG_CH_DISABLE                             (0x00000000)
  62/* Request Mode */
  63#define COH901318_CX_CFG_RM_MASK                                (0x00000006)
  64#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY                    (0x0 << 1)
  65#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY                   (0x1 << 1)
  66#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY                   (0x1 << 1)
  67#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY                (0x3 << 1)
  68#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY                (0x3 << 1)
  69/* Linked channel request field. RM must == 11 */
  70#define COH901318_CX_CFG_LCRF_SHIFT                             3
  71#define COH901318_CX_CFG_LCRF_MASK                              (0x000001F8)
  72#define COH901318_CX_CFG_LCR_DISABLE                            (0x00000000)
  73/* Terminal Counter Interrupt Request Mask */
  74#define COH901318_CX_CFG_TC_IRQ_ENABLE                          (0x00000200)
  75#define COH901318_CX_CFG_TC_IRQ_DISABLE                         (0x00000000)
  76/* Bus Error interrupt Mask */
  77#define COH901318_CX_CFG_BE_IRQ_ENABLE                          (0x00000400)
  78#define COH901318_CX_CFG_BE_IRQ_DISABLE                         (0x00000000)
  79
  80/*
  81 * CX_STAT - Channel Status Registers 32bit (R/-)
  82 */
  83#define COH901318_CX_STAT                                       (0x0200)
  84#define COH901318_CX_STAT_SPACING                               (0x04)
  85#define COH901318_CX_STAT_RBE_IRQ_IND                           (0x00000008)
  86#define COH901318_CX_STAT_RTC_IRQ_IND                           (0x00000004)
  87#define COH901318_CX_STAT_ACTIVE                                (0x00000002)
  88#define COH901318_CX_STAT_ENABLED                               (0x00000001)
  89
  90/*
  91 * CX_CTRL - Channel Control Registers 32bit (R/W)
  92 */
  93#define COH901318_CX_CTRL                                       (0x0400)
  94#define COH901318_CX_CTRL_SPACING                               (0x10)
  95/* Transfer Count Enable */
  96#define COH901318_CX_CTRL_TC_ENABLE                             (0x00001000)
  97#define COH901318_CX_CTRL_TC_DISABLE                            (0x00000000)
  98/* Transfer Count Value 0 - 4095 */
  99#define COH901318_CX_CTRL_TC_VALUE_MASK                         (0x00000FFF)
 100/* Burst count */
 101#define COH901318_CX_CTRL_BURST_COUNT_MASK                      (0x0000E000)
 102#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES                  (0x7 << 13)
 103#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES                  (0x6 << 13)
 104#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES                  (0x5 << 13)
 105#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES                  (0x4 << 13)
 106#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES                   (0x3 << 13)
 107#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES                   (0x2 << 13)
 108#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES                   (0x1 << 13)
 109#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE                    (0x0 << 13)
 110/* Source bus size  */
 111#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK                     (0x00030000)
 112#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS                  (0x2 << 16)
 113#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS                  (0x1 << 16)
 114#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS                   (0x0 << 16)
 115/* Source address increment */
 116#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE                   (0x00040000)
 117#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE                  (0x00000000)
 118/* Destination Bus Size */
 119#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK                     (0x00180000)
 120#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS                  (0x2 << 19)
 121#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS                  (0x1 << 19)
 122#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS                   (0x0 << 19)
 123/* Destination address increment */
 124#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE                   (0x00200000)
 125#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE                  (0x00000000)
 126/* Master Mode (Master2 is only connected to MSL) */
 127#define COH901318_CX_CTRL_MASTER_MODE_MASK                      (0x00C00000)
 128#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W                   (0x3 << 22)
 129#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W                   (0x2 << 22)
 130#define COH901318_CX_CTRL_MASTER_MODE_M2RW                      (0x1 << 22)
 131#define COH901318_CX_CTRL_MASTER_MODE_M1RW                      (0x0 << 22)
 132/* Terminal Count flag to PER enable */
 133#define COH901318_CX_CTRL_TCP_ENABLE                            (0x01000000)
 134#define COH901318_CX_CTRL_TCP_DISABLE                           (0x00000000)
 135/* Terminal Count flags to CPU enable */
 136#define COH901318_CX_CTRL_TC_IRQ_ENABLE                         (0x02000000)
 137#define COH901318_CX_CTRL_TC_IRQ_DISABLE                        (0x00000000)
 138/* Hand shake to peripheral */
 139#define COH901318_CX_CTRL_HSP_ENABLE                            (0x04000000)
 140#define COH901318_CX_CTRL_HSP_DISABLE                           (0x00000000)
 141#define COH901318_CX_CTRL_HSS_ENABLE                            (0x08000000)
 142#define COH901318_CX_CTRL_HSS_DISABLE                           (0x00000000)
 143/* DMA mode */
 144#define COH901318_CX_CTRL_DDMA_MASK                             (0x30000000)
 145#define COH901318_CX_CTRL_DDMA_LEGACY                           (0x0 << 28)
 146#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1                      (0x1 << 28)
 147#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2                      (0x2 << 28)
 148/* Primary Request Data Destination */
 149#define COH901318_CX_CTRL_PRDD_MASK                             (0x40000000)
 150#define COH901318_CX_CTRL_PRDD_DEST                             (0x1 << 30)
 151#define COH901318_CX_CTRL_PRDD_SOURCE                           (0x0 << 30)
 152
 153/*
 154 * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
 155 */
 156#define COH901318_CX_SRC_ADDR                                   (0x0404)
 157#define COH901318_CX_SRC_ADDR_SPACING                           (0x10)
 158
 159/*
 160 * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
 161 */
 162#define COH901318_CX_DST_ADDR                                   (0x0408)
 163#define COH901318_CX_DST_ADDR_SPACING                           (0x10)
 164
 165/*
 166 * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
 167 */
 168#define COH901318_CX_LNK_ADDR                                   (0x040C)
 169#define COH901318_CX_LNK_ADDR_SPACING                           (0x10)
 170#define COH901318_CX_LNK_LINK_IMMEDIATE                         (0x00000001)
 171
 172/**
 173 * struct coh901318_params - parameters for DMAC configuration
 174 * @config: DMA config register
 175 * @ctrl_lli_last: DMA control register for the last lli in the list
 176 * @ctrl_lli: DMA control register for an lli
 177 * @ctrl_lli_chained: DMA control register for a chained lli
 178 */
 179struct coh901318_params {
 180        u32 config;
 181        u32 ctrl_lli_last;
 182        u32 ctrl_lli;
 183        u32 ctrl_lli_chained;
 184};
 185
 186/**
 187 * struct coh_dma_channel - dma channel base
 188 * @name: ascii name of dma channel
 189 * @number: channel id number
 190 * @desc_nbr_max: number of preallocated descriptors
 191 * @priority_high: prio of channel, 0 low otherwise high.
 192 * @param: configuration parameters
 193 */
 194struct coh_dma_channel {
 195        const char name[32];
 196        const int number;
 197        const int desc_nbr_max;
 198        const int priority_high;
 199        const struct coh901318_params param;
 200};
 201
 202/**
 203 * struct powersave - DMA power save structure
 204 * @lock: lock protecting data in this struct
 205 * @started_channels: bit mask indicating active dma channels
 206 */
 207struct powersave {
 208        spinlock_t lock;
 209        u64 started_channels;
 210};
 211
 212/* points out all dma slave channels.
 213 * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
 214 * Select all channels from A to B, end of list is marked with -1,-1
 215 */
 216static int dma_slave_channels[] = {
 217        U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
 218        U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
 219
 220/* points out all dma memcpy channels. */
 221static int dma_memcpy_channels[] = {
 222        U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
 223
 224#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
 225                        COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
 226                        COH901318_CX_CFG_LCR_DISABLE | \
 227                        COH901318_CX_CFG_TC_IRQ_ENABLE | \
 228                        COH901318_CX_CFG_BE_IRQ_ENABLE)
 229#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
 230                        COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
 231                        COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
 232                        COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
 233                        COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
 234                        COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
 235                        COH901318_CX_CTRL_MASTER_MODE_M1RW | \
 236                        COH901318_CX_CTRL_TCP_DISABLE | \
 237                        COH901318_CX_CTRL_TC_IRQ_DISABLE | \
 238                        COH901318_CX_CTRL_HSP_DISABLE | \
 239                        COH901318_CX_CTRL_HSS_DISABLE | \
 240                        COH901318_CX_CTRL_DDMA_LEGACY | \
 241                        COH901318_CX_CTRL_PRDD_SOURCE)
 242#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
 243                        COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
 244                        COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
 245                        COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
 246                        COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
 247                        COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
 248                        COH901318_CX_CTRL_MASTER_MODE_M1RW | \
 249                        COH901318_CX_CTRL_TCP_DISABLE | \
 250                        COH901318_CX_CTRL_TC_IRQ_DISABLE | \
 251                        COH901318_CX_CTRL_HSP_DISABLE | \
 252                        COH901318_CX_CTRL_HSS_DISABLE | \
 253                        COH901318_CX_CTRL_DDMA_LEGACY | \
 254                        COH901318_CX_CTRL_PRDD_SOURCE)
 255#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
 256                        COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
 257                        COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
 258                        COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
 259                        COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
 260                        COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
 261                        COH901318_CX_CTRL_MASTER_MODE_M1RW | \
 262                        COH901318_CX_CTRL_TCP_DISABLE | \
 263                        COH901318_CX_CTRL_TC_IRQ_ENABLE | \
 264                        COH901318_CX_CTRL_HSP_DISABLE | \
 265                        COH901318_CX_CTRL_HSS_DISABLE | \
 266                        COH901318_CX_CTRL_DDMA_LEGACY | \
 267                        COH901318_CX_CTRL_PRDD_SOURCE)
 268
 269const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
 270        {
 271                .number = U300_DMA_MSL_TX_0,
 272                .name = "MSL TX 0",
 273                .priority_high = 0,
 274        },
 275        {
 276                .number = U300_DMA_MSL_TX_1,
 277                .name = "MSL TX 1",
 278                .priority_high = 0,
 279                .param.config = COH901318_CX_CFG_CH_DISABLE |
 280                                COH901318_CX_CFG_LCR_DISABLE |
 281                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 282                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 283                .param.ctrl_lli_chained = 0 |
 284                                COH901318_CX_CTRL_TC_ENABLE |
 285                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 286                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 287                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 288                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 289                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 290                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 291                                COH901318_CX_CTRL_TCP_DISABLE |
 292                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 293                                COH901318_CX_CTRL_HSP_ENABLE |
 294                                COH901318_CX_CTRL_HSS_DISABLE |
 295                                COH901318_CX_CTRL_DDMA_LEGACY |
 296                                COH901318_CX_CTRL_PRDD_SOURCE,
 297                .param.ctrl_lli = 0 |
 298                                COH901318_CX_CTRL_TC_ENABLE |
 299                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 300                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 301                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 302                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 303                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 304                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 305                                COH901318_CX_CTRL_TCP_ENABLE |
 306                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 307                                COH901318_CX_CTRL_HSP_ENABLE |
 308                                COH901318_CX_CTRL_HSS_DISABLE |
 309                                COH901318_CX_CTRL_DDMA_LEGACY |
 310                                COH901318_CX_CTRL_PRDD_SOURCE,
 311                .param.ctrl_lli_last = 0 |
 312                                COH901318_CX_CTRL_TC_ENABLE |
 313                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 314                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 315                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 316                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 317                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 318                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 319                                COH901318_CX_CTRL_TCP_ENABLE |
 320                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 321                                COH901318_CX_CTRL_HSP_ENABLE |
 322                                COH901318_CX_CTRL_HSS_DISABLE |
 323                                COH901318_CX_CTRL_DDMA_LEGACY |
 324                                COH901318_CX_CTRL_PRDD_SOURCE,
 325        },
 326        {
 327                .number = U300_DMA_MSL_TX_2,
 328                .name = "MSL TX 2",
 329                .priority_high = 0,
 330                .param.config = COH901318_CX_CFG_CH_DISABLE |
 331                                COH901318_CX_CFG_LCR_DISABLE |
 332                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 333                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 334                .param.ctrl_lli_chained = 0 |
 335                                COH901318_CX_CTRL_TC_ENABLE |
 336                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 337                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 338                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 339                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 340                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 341                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 342                                COH901318_CX_CTRL_TCP_DISABLE |
 343                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 344                                COH901318_CX_CTRL_HSP_ENABLE |
 345                                COH901318_CX_CTRL_HSS_DISABLE |
 346                                COH901318_CX_CTRL_DDMA_LEGACY |
 347                                COH901318_CX_CTRL_PRDD_SOURCE,
 348                .param.ctrl_lli = 0 |
 349                                COH901318_CX_CTRL_TC_ENABLE |
 350                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 351                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 352                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 353                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 354                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 355                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 356                                COH901318_CX_CTRL_TCP_ENABLE |
 357                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 358                                COH901318_CX_CTRL_HSP_ENABLE |
 359                                COH901318_CX_CTRL_HSS_DISABLE |
 360                                COH901318_CX_CTRL_DDMA_LEGACY |
 361                                COH901318_CX_CTRL_PRDD_SOURCE,
 362                .param.ctrl_lli_last = 0 |
 363                                COH901318_CX_CTRL_TC_ENABLE |
 364                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 365                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 366                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 367                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 368                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 369                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 370                                COH901318_CX_CTRL_TCP_ENABLE |
 371                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 372                                COH901318_CX_CTRL_HSP_ENABLE |
 373                                COH901318_CX_CTRL_HSS_DISABLE |
 374                                COH901318_CX_CTRL_DDMA_LEGACY |
 375                                COH901318_CX_CTRL_PRDD_SOURCE,
 376                .desc_nbr_max = 10,
 377        },
 378        {
 379                .number = U300_DMA_MSL_TX_3,
 380                .name = "MSL TX 3",
 381                .priority_high = 0,
 382                .param.config = COH901318_CX_CFG_CH_DISABLE |
 383                                COH901318_CX_CFG_LCR_DISABLE |
 384                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 385                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 386                .param.ctrl_lli_chained = 0 |
 387                                COH901318_CX_CTRL_TC_ENABLE |
 388                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 389                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 390                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 391                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 392                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 393                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 394                                COH901318_CX_CTRL_TCP_DISABLE |
 395                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 396                                COH901318_CX_CTRL_HSP_ENABLE |
 397                                COH901318_CX_CTRL_HSS_DISABLE |
 398                                COH901318_CX_CTRL_DDMA_LEGACY |
 399                                COH901318_CX_CTRL_PRDD_SOURCE,
 400                .param.ctrl_lli = 0 |
 401                                COH901318_CX_CTRL_TC_ENABLE |
 402                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 403                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 404                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 405                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 406                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 407                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 408                                COH901318_CX_CTRL_TCP_ENABLE |
 409                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 410                                COH901318_CX_CTRL_HSP_ENABLE |
 411                                COH901318_CX_CTRL_HSS_DISABLE |
 412                                COH901318_CX_CTRL_DDMA_LEGACY |
 413                                COH901318_CX_CTRL_PRDD_SOURCE,
 414                .param.ctrl_lli_last = 0 |
 415                                COH901318_CX_CTRL_TC_ENABLE |
 416                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 417                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 418                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 419                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 420                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 421                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 422                                COH901318_CX_CTRL_TCP_ENABLE |
 423                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 424                                COH901318_CX_CTRL_HSP_ENABLE |
 425                                COH901318_CX_CTRL_HSS_DISABLE |
 426                                COH901318_CX_CTRL_DDMA_LEGACY |
 427                                COH901318_CX_CTRL_PRDD_SOURCE,
 428        },
 429        {
 430                .number = U300_DMA_MSL_TX_4,
 431                .name = "MSL TX 4",
 432                .priority_high = 0,
 433                .param.config = COH901318_CX_CFG_CH_DISABLE |
 434                                COH901318_CX_CFG_LCR_DISABLE |
 435                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 436                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 437                .param.ctrl_lli_chained = 0 |
 438                                COH901318_CX_CTRL_TC_ENABLE |
 439                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 440                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 441                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 442                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 443                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 444                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 445                                COH901318_CX_CTRL_TCP_DISABLE |
 446                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 447                                COH901318_CX_CTRL_HSP_ENABLE |
 448                                COH901318_CX_CTRL_HSS_DISABLE |
 449                                COH901318_CX_CTRL_DDMA_LEGACY |
 450                                COH901318_CX_CTRL_PRDD_SOURCE,
 451                .param.ctrl_lli = 0 |
 452                                COH901318_CX_CTRL_TC_ENABLE |
 453                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 454                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 455                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 456                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 457                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 458                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 459                                COH901318_CX_CTRL_TCP_ENABLE |
 460                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 461                                COH901318_CX_CTRL_HSP_ENABLE |
 462                                COH901318_CX_CTRL_HSS_DISABLE |
 463                                COH901318_CX_CTRL_DDMA_LEGACY |
 464                                COH901318_CX_CTRL_PRDD_SOURCE,
 465                .param.ctrl_lli_last = 0 |
 466                                COH901318_CX_CTRL_TC_ENABLE |
 467                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 468                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 469                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 470                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 471                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 472                                COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
 473                                COH901318_CX_CTRL_TCP_ENABLE |
 474                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 475                                COH901318_CX_CTRL_HSP_ENABLE |
 476                                COH901318_CX_CTRL_HSS_DISABLE |
 477                                COH901318_CX_CTRL_DDMA_LEGACY |
 478                                COH901318_CX_CTRL_PRDD_SOURCE,
 479        },
 480        {
 481                .number = U300_DMA_MSL_TX_5,
 482                .name = "MSL TX 5",
 483                .priority_high = 0,
 484        },
 485        {
 486                .number = U300_DMA_MSL_TX_6,
 487                .name = "MSL TX 6",
 488                .priority_high = 0,
 489        },
 490        {
 491                .number = U300_DMA_MSL_RX_0,
 492                .name = "MSL RX 0",
 493                .priority_high = 0,
 494        },
 495        {
 496                .number = U300_DMA_MSL_RX_1,
 497                .name = "MSL RX 1",
 498                .priority_high = 0,
 499                .param.config = COH901318_CX_CFG_CH_DISABLE |
 500                                COH901318_CX_CFG_LCR_DISABLE |
 501                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 502                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 503                .param.ctrl_lli_chained = 0 |
 504                                COH901318_CX_CTRL_TC_ENABLE |
 505                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 506                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 507                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 508                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 509                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 510                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 511                                COH901318_CX_CTRL_TCP_DISABLE |
 512                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 513                                COH901318_CX_CTRL_HSP_ENABLE |
 514                                COH901318_CX_CTRL_HSS_DISABLE |
 515                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 516                                COH901318_CX_CTRL_PRDD_DEST,
 517                .param.ctrl_lli = 0,
 518                .param.ctrl_lli_last = 0 |
 519                                COH901318_CX_CTRL_TC_ENABLE |
 520                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 521                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 522                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 523                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 524                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 525                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 526                                COH901318_CX_CTRL_TCP_DISABLE |
 527                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 528                                COH901318_CX_CTRL_HSP_ENABLE |
 529                                COH901318_CX_CTRL_HSS_DISABLE |
 530                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 531                                COH901318_CX_CTRL_PRDD_DEST,
 532        },
 533        {
 534                .number = U300_DMA_MSL_RX_2,
 535                .name = "MSL RX 2",
 536                .priority_high = 0,
 537                .param.config = COH901318_CX_CFG_CH_DISABLE |
 538                                COH901318_CX_CFG_LCR_DISABLE |
 539                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 540                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 541                .param.ctrl_lli_chained = 0 |
 542                                COH901318_CX_CTRL_TC_ENABLE |
 543                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 544                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 545                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 546                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 547                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 548                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 549                                COH901318_CX_CTRL_TCP_DISABLE |
 550                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 551                                COH901318_CX_CTRL_HSP_ENABLE |
 552                                COH901318_CX_CTRL_HSS_DISABLE |
 553                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 554                                COH901318_CX_CTRL_PRDD_DEST,
 555                .param.ctrl_lli = 0 |
 556                                COH901318_CX_CTRL_TC_ENABLE |
 557                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 558                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 559                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 560                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 561                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 562                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 563                                COH901318_CX_CTRL_TCP_DISABLE |
 564                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 565                                COH901318_CX_CTRL_HSP_ENABLE |
 566                                COH901318_CX_CTRL_HSS_DISABLE |
 567                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 568                                COH901318_CX_CTRL_PRDD_DEST,
 569                .param.ctrl_lli_last = 0 |
 570                                COH901318_CX_CTRL_TC_ENABLE |
 571                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 572                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 573                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 574                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 575                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 576                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 577                                COH901318_CX_CTRL_TCP_DISABLE |
 578                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 579                                COH901318_CX_CTRL_HSP_ENABLE |
 580                                COH901318_CX_CTRL_HSS_DISABLE |
 581                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 582                                COH901318_CX_CTRL_PRDD_DEST,
 583        },
 584        {
 585                .number = U300_DMA_MSL_RX_3,
 586                .name = "MSL RX 3",
 587                .priority_high = 0,
 588                .param.config = COH901318_CX_CFG_CH_DISABLE |
 589                                COH901318_CX_CFG_LCR_DISABLE |
 590                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 591                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 592                .param.ctrl_lli_chained = 0 |
 593                                COH901318_CX_CTRL_TC_ENABLE |
 594                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 595                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 596                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 597                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 598                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 599                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 600                                COH901318_CX_CTRL_TCP_DISABLE |
 601                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 602                                COH901318_CX_CTRL_HSP_ENABLE |
 603                                COH901318_CX_CTRL_HSS_DISABLE |
 604                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 605                                COH901318_CX_CTRL_PRDD_DEST,
 606                .param.ctrl_lli = 0 |
 607                                COH901318_CX_CTRL_TC_ENABLE |
 608                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 609                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 610                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 611                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 612                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 613                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 614                                COH901318_CX_CTRL_TCP_DISABLE |
 615                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 616                                COH901318_CX_CTRL_HSP_ENABLE |
 617                                COH901318_CX_CTRL_HSS_DISABLE |
 618                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 619                                COH901318_CX_CTRL_PRDD_DEST,
 620                .param.ctrl_lli_last = 0 |
 621                                COH901318_CX_CTRL_TC_ENABLE |
 622                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 623                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 624                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 625                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 626                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 627                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 628                                COH901318_CX_CTRL_TCP_DISABLE |
 629                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 630                                COH901318_CX_CTRL_HSP_ENABLE |
 631                                COH901318_CX_CTRL_HSS_DISABLE |
 632                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 633                                COH901318_CX_CTRL_PRDD_DEST,
 634        },
 635        {
 636                .number = U300_DMA_MSL_RX_4,
 637                .name = "MSL RX 4",
 638                .priority_high = 0,
 639                .param.config = COH901318_CX_CFG_CH_DISABLE |
 640                                COH901318_CX_CFG_LCR_DISABLE |
 641                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 642                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 643                .param.ctrl_lli_chained = 0 |
 644                                COH901318_CX_CTRL_TC_ENABLE |
 645                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 646                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 647                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 648                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 649                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 650                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 651                                COH901318_CX_CTRL_TCP_DISABLE |
 652                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 653                                COH901318_CX_CTRL_HSP_ENABLE |
 654                                COH901318_CX_CTRL_HSS_DISABLE |
 655                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 656                                COH901318_CX_CTRL_PRDD_DEST,
 657                .param.ctrl_lli = 0 |
 658                                COH901318_CX_CTRL_TC_ENABLE |
 659                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 660                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 661                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 662                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 663                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 664                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 665                                COH901318_CX_CTRL_TCP_DISABLE |
 666                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 667                                COH901318_CX_CTRL_HSP_ENABLE |
 668                                COH901318_CX_CTRL_HSS_DISABLE |
 669                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 670                                COH901318_CX_CTRL_PRDD_DEST,
 671                .param.ctrl_lli_last = 0 |
 672                                COH901318_CX_CTRL_TC_ENABLE |
 673                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 674                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 675                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 676                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 677                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 678                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 679                                COH901318_CX_CTRL_TCP_DISABLE |
 680                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 681                                COH901318_CX_CTRL_HSP_ENABLE |
 682                                COH901318_CX_CTRL_HSS_DISABLE |
 683                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 684                                COH901318_CX_CTRL_PRDD_DEST,
 685        },
 686        {
 687                .number = U300_DMA_MSL_RX_5,
 688                .name = "MSL RX 5",
 689                .priority_high = 0,
 690                .param.config = COH901318_CX_CFG_CH_DISABLE |
 691                                COH901318_CX_CFG_LCR_DISABLE |
 692                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 693                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 694                .param.ctrl_lli_chained = 0 |
 695                                COH901318_CX_CTRL_TC_ENABLE |
 696                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 697                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 698                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 699                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 700                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 701                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 702                                COH901318_CX_CTRL_TCP_DISABLE |
 703                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 704                                COH901318_CX_CTRL_HSP_ENABLE |
 705                                COH901318_CX_CTRL_HSS_DISABLE |
 706                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 707                                COH901318_CX_CTRL_PRDD_DEST,
 708                .param.ctrl_lli = 0 |
 709                                COH901318_CX_CTRL_TC_ENABLE |
 710                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 711                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 712                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 713                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 714                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 715                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 716                                COH901318_CX_CTRL_TCP_DISABLE |
 717                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 718                                COH901318_CX_CTRL_HSP_ENABLE |
 719                                COH901318_CX_CTRL_HSS_DISABLE |
 720                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 721                                COH901318_CX_CTRL_PRDD_DEST,
 722                .param.ctrl_lli_last = 0 |
 723                                COH901318_CX_CTRL_TC_ENABLE |
 724                                COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
 725                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 726                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 727                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 728                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 729                                COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
 730                                COH901318_CX_CTRL_TCP_DISABLE |
 731                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 732                                COH901318_CX_CTRL_HSP_ENABLE |
 733                                COH901318_CX_CTRL_HSS_DISABLE |
 734                                COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
 735                                COH901318_CX_CTRL_PRDD_DEST,
 736        },
 737        {
 738                .number = U300_DMA_MSL_RX_6,
 739                .name = "MSL RX 6",
 740                .priority_high = 0,
 741        },
 742        /*
 743         * Don't set up device address, burst count or size of src
 744         * or dst bus for this peripheral - handled by PrimeCell
 745         * DMA extension.
 746         */
 747        {
 748                .number = U300_DMA_MMCSD_RX_TX,
 749                .name = "MMCSD RX TX",
 750                .priority_high = 0,
 751                .param.config = COH901318_CX_CFG_CH_DISABLE |
 752                                COH901318_CX_CFG_LCR_DISABLE |
 753                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 754                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 755                .param.ctrl_lli_chained = 0 |
 756                                COH901318_CX_CTRL_TC_ENABLE |
 757                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 758                                COH901318_CX_CTRL_TCP_ENABLE |
 759                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 760                                COH901318_CX_CTRL_HSP_ENABLE |
 761                                COH901318_CX_CTRL_HSS_DISABLE |
 762                                COH901318_CX_CTRL_DDMA_LEGACY,
 763                .param.ctrl_lli = 0 |
 764                                COH901318_CX_CTRL_TC_ENABLE |
 765                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 766                                COH901318_CX_CTRL_TCP_ENABLE |
 767                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 768                                COH901318_CX_CTRL_HSP_ENABLE |
 769                                COH901318_CX_CTRL_HSS_DISABLE |
 770                                COH901318_CX_CTRL_DDMA_LEGACY,
 771                .param.ctrl_lli_last = 0 |
 772                                COH901318_CX_CTRL_TC_ENABLE |
 773                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 774                                COH901318_CX_CTRL_TCP_DISABLE |
 775                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 776                                COH901318_CX_CTRL_HSP_ENABLE |
 777                                COH901318_CX_CTRL_HSS_DISABLE |
 778                                COH901318_CX_CTRL_DDMA_LEGACY,
 779
 780        },
 781        {
 782                .number = U300_DMA_MSPRO_TX,
 783                .name = "MSPRO TX",
 784                .priority_high = 0,
 785        },
 786        {
 787                .number = U300_DMA_MSPRO_RX,
 788                .name = "MSPRO RX",
 789                .priority_high = 0,
 790        },
 791        /*
 792         * Don't set up device address, burst count or size of src
 793         * or dst bus for this peripheral - handled by PrimeCell
 794         * DMA extension.
 795         */
 796        {
 797                .number = U300_DMA_UART0_TX,
 798                .name = "UART0 TX",
 799                .priority_high = 0,
 800                .param.config = COH901318_CX_CFG_CH_DISABLE |
 801                                COH901318_CX_CFG_LCR_DISABLE |
 802                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 803                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 804                .param.ctrl_lli_chained = 0 |
 805                                COH901318_CX_CTRL_TC_ENABLE |
 806                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 807                                COH901318_CX_CTRL_TCP_ENABLE |
 808                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 809                                COH901318_CX_CTRL_HSP_ENABLE |
 810                                COH901318_CX_CTRL_HSS_DISABLE |
 811                                COH901318_CX_CTRL_DDMA_LEGACY,
 812                .param.ctrl_lli = 0 |
 813                                COH901318_CX_CTRL_TC_ENABLE |
 814                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 815                                COH901318_CX_CTRL_TCP_ENABLE |
 816                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 817                                COH901318_CX_CTRL_HSP_ENABLE |
 818                                COH901318_CX_CTRL_HSS_DISABLE |
 819                                COH901318_CX_CTRL_DDMA_LEGACY,
 820                .param.ctrl_lli_last = 0 |
 821                                COH901318_CX_CTRL_TC_ENABLE |
 822                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 823                                COH901318_CX_CTRL_TCP_ENABLE |
 824                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 825                                COH901318_CX_CTRL_HSP_ENABLE |
 826                                COH901318_CX_CTRL_HSS_DISABLE |
 827                                COH901318_CX_CTRL_DDMA_LEGACY,
 828        },
 829        {
 830                .number = U300_DMA_UART0_RX,
 831                .name = "UART0 RX",
 832                .priority_high = 0,
 833                .param.config = COH901318_CX_CFG_CH_DISABLE |
 834                                COH901318_CX_CFG_LCR_DISABLE |
 835                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 836                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 837                .param.ctrl_lli_chained = 0 |
 838                                COH901318_CX_CTRL_TC_ENABLE |
 839                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 840                                COH901318_CX_CTRL_TCP_ENABLE |
 841                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 842                                COH901318_CX_CTRL_HSP_ENABLE |
 843                                COH901318_CX_CTRL_HSS_DISABLE |
 844                                COH901318_CX_CTRL_DDMA_LEGACY,
 845                .param.ctrl_lli = 0 |
 846                                COH901318_CX_CTRL_TC_ENABLE |
 847                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 848                                COH901318_CX_CTRL_TCP_ENABLE |
 849                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 850                                COH901318_CX_CTRL_HSP_ENABLE |
 851                                COH901318_CX_CTRL_HSS_DISABLE |
 852                                COH901318_CX_CTRL_DDMA_LEGACY,
 853                .param.ctrl_lli_last = 0 |
 854                                COH901318_CX_CTRL_TC_ENABLE |
 855                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 856                                COH901318_CX_CTRL_TCP_ENABLE |
 857                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 858                                COH901318_CX_CTRL_HSP_ENABLE |
 859                                COH901318_CX_CTRL_HSS_DISABLE |
 860                                COH901318_CX_CTRL_DDMA_LEGACY,
 861        },
 862        {
 863                .number = U300_DMA_APEX_TX,
 864                .name = "APEX TX",
 865                .priority_high = 0,
 866        },
 867        {
 868                .number = U300_DMA_APEX_RX,
 869                .name = "APEX RX",
 870                .priority_high = 0,
 871        },
 872        {
 873                .number = U300_DMA_PCM_I2S0_TX,
 874                .name = "PCM I2S0 TX",
 875                .priority_high = 1,
 876                .param.config = COH901318_CX_CFG_CH_DISABLE |
 877                                COH901318_CX_CFG_LCR_DISABLE |
 878                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 879                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 880                .param.ctrl_lli_chained = 0 |
 881                                COH901318_CX_CTRL_TC_ENABLE |
 882                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 883                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 884                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 885                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 886                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 887                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 888                                COH901318_CX_CTRL_TCP_DISABLE |
 889                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 890                                COH901318_CX_CTRL_HSP_ENABLE |
 891                                COH901318_CX_CTRL_HSS_DISABLE |
 892                                COH901318_CX_CTRL_DDMA_LEGACY |
 893                                COH901318_CX_CTRL_PRDD_SOURCE,
 894                .param.ctrl_lli = 0 |
 895                                COH901318_CX_CTRL_TC_ENABLE |
 896                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 897                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 898                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 899                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 900                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 901                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 902                                COH901318_CX_CTRL_TCP_ENABLE |
 903                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 904                                COH901318_CX_CTRL_HSP_ENABLE |
 905                                COH901318_CX_CTRL_HSS_DISABLE |
 906                                COH901318_CX_CTRL_DDMA_LEGACY |
 907                                COH901318_CX_CTRL_PRDD_SOURCE,
 908                .param.ctrl_lli_last = 0 |
 909                                COH901318_CX_CTRL_TC_ENABLE |
 910                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 911                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 912                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 913                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 914                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 915                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 916                                COH901318_CX_CTRL_TCP_ENABLE |
 917                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 918                                COH901318_CX_CTRL_HSP_ENABLE |
 919                                COH901318_CX_CTRL_HSS_DISABLE |
 920                                COH901318_CX_CTRL_DDMA_LEGACY |
 921                                COH901318_CX_CTRL_PRDD_SOURCE,
 922        },
 923        {
 924                .number = U300_DMA_PCM_I2S0_RX,
 925                .name = "PCM I2S0 RX",
 926                .priority_high = 1,
 927                .param.config = COH901318_CX_CFG_CH_DISABLE |
 928                                COH901318_CX_CFG_LCR_DISABLE |
 929                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 930                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 931                .param.ctrl_lli_chained = 0 |
 932                                COH901318_CX_CTRL_TC_ENABLE |
 933                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 934                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 935                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 936                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 937                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 938                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 939                                COH901318_CX_CTRL_TCP_DISABLE |
 940                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 941                                COH901318_CX_CTRL_HSP_ENABLE |
 942                                COH901318_CX_CTRL_HSS_DISABLE |
 943                                COH901318_CX_CTRL_DDMA_LEGACY |
 944                                COH901318_CX_CTRL_PRDD_DEST,
 945                .param.ctrl_lli = 0 |
 946                                COH901318_CX_CTRL_TC_ENABLE |
 947                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 948                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 949                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 950                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 951                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 952                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 953                                COH901318_CX_CTRL_TCP_ENABLE |
 954                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 955                                COH901318_CX_CTRL_HSP_ENABLE |
 956                                COH901318_CX_CTRL_HSS_DISABLE |
 957                                COH901318_CX_CTRL_DDMA_LEGACY |
 958                                COH901318_CX_CTRL_PRDD_DEST,
 959                .param.ctrl_lli_last = 0 |
 960                                COH901318_CX_CTRL_TC_ENABLE |
 961                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 962                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 963                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
 964                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 965                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
 966                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 967                                COH901318_CX_CTRL_TCP_ENABLE |
 968                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
 969                                COH901318_CX_CTRL_HSP_ENABLE |
 970                                COH901318_CX_CTRL_HSS_DISABLE |
 971                                COH901318_CX_CTRL_DDMA_LEGACY |
 972                                COH901318_CX_CTRL_PRDD_DEST,
 973        },
 974        {
 975                .number = U300_DMA_PCM_I2S1_TX,
 976                .name = "PCM I2S1 TX",
 977                .priority_high = 1,
 978                .param.config = COH901318_CX_CFG_CH_DISABLE |
 979                                COH901318_CX_CFG_LCR_DISABLE |
 980                                COH901318_CX_CFG_TC_IRQ_ENABLE |
 981                                COH901318_CX_CFG_BE_IRQ_ENABLE,
 982                .param.ctrl_lli_chained = 0 |
 983                                COH901318_CX_CTRL_TC_ENABLE |
 984                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 985                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
 986                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
 987                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
 988                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
 989                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
 990                                COH901318_CX_CTRL_TCP_DISABLE |
 991                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
 992                                COH901318_CX_CTRL_HSP_ENABLE |
 993                                COH901318_CX_CTRL_HSS_DISABLE |
 994                                COH901318_CX_CTRL_DDMA_LEGACY |
 995                                COH901318_CX_CTRL_PRDD_SOURCE,
 996                .param.ctrl_lli = 0 |
 997                                COH901318_CX_CTRL_TC_ENABLE |
 998                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
 999                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1000                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1001                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1002                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1003                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1004                                COH901318_CX_CTRL_TCP_ENABLE |
1005                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
1006                                COH901318_CX_CTRL_HSP_ENABLE |
1007                                COH901318_CX_CTRL_HSS_DISABLE |
1008                                COH901318_CX_CTRL_DDMA_LEGACY |
1009                                COH901318_CX_CTRL_PRDD_SOURCE,
1010                .param.ctrl_lli_last = 0 |
1011                                COH901318_CX_CTRL_TC_ENABLE |
1012                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1013                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1014                                COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1015                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1016                                COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1017                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1018                                COH901318_CX_CTRL_TCP_ENABLE |
1019                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1020                                COH901318_CX_CTRL_HSP_ENABLE |
1021                                COH901318_CX_CTRL_HSS_DISABLE |
1022                                COH901318_CX_CTRL_DDMA_LEGACY |
1023                                COH901318_CX_CTRL_PRDD_SOURCE,
1024        },
1025        {
1026                .number = U300_DMA_PCM_I2S1_RX,
1027                .name = "PCM I2S1 RX",
1028                .priority_high = 1,
1029                .param.config = COH901318_CX_CFG_CH_DISABLE |
1030                                COH901318_CX_CFG_LCR_DISABLE |
1031                                COH901318_CX_CFG_TC_IRQ_ENABLE |
1032                                COH901318_CX_CFG_BE_IRQ_ENABLE,
1033                .param.ctrl_lli_chained = 0 |
1034                                COH901318_CX_CTRL_TC_ENABLE |
1035                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1036                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1037                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1038                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1039                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1040                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1041                                COH901318_CX_CTRL_TCP_DISABLE |
1042                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
1043                                COH901318_CX_CTRL_HSP_ENABLE |
1044                                COH901318_CX_CTRL_HSS_DISABLE |
1045                                COH901318_CX_CTRL_DDMA_LEGACY |
1046                                COH901318_CX_CTRL_PRDD_DEST,
1047                .param.ctrl_lli = 0 |
1048                                COH901318_CX_CTRL_TC_ENABLE |
1049                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1050                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1051                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1052                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1053                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1054                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1055                                COH901318_CX_CTRL_TCP_ENABLE |
1056                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
1057                                COH901318_CX_CTRL_HSP_ENABLE |
1058                                COH901318_CX_CTRL_HSS_DISABLE |
1059                                COH901318_CX_CTRL_DDMA_LEGACY |
1060                                COH901318_CX_CTRL_PRDD_DEST,
1061                .param.ctrl_lli_last = 0 |
1062                                COH901318_CX_CTRL_TC_ENABLE |
1063                                COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1064                                COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1065                                COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1066                                COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1067                                COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1068                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1069                                COH901318_CX_CTRL_TCP_ENABLE |
1070                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1071                                COH901318_CX_CTRL_HSP_ENABLE |
1072                                COH901318_CX_CTRL_HSS_DISABLE |
1073                                COH901318_CX_CTRL_DDMA_LEGACY |
1074                                COH901318_CX_CTRL_PRDD_DEST,
1075        },
1076        {
1077                .number = U300_DMA_XGAM_CDI,
1078                .name = "XGAM CDI",
1079                .priority_high = 0,
1080        },
1081        {
1082                .number = U300_DMA_XGAM_PDI,
1083                .name = "XGAM PDI",
1084                .priority_high = 0,
1085        },
1086        /*
1087         * Don't set up device address, burst count or size of src
1088         * or dst bus for this peripheral - handled by PrimeCell
1089         * DMA extension.
1090         */
1091        {
1092                .number = U300_DMA_SPI_TX,
1093                .name = "SPI TX",
1094                .priority_high = 0,
1095                .param.config = COH901318_CX_CFG_CH_DISABLE |
1096                                COH901318_CX_CFG_LCR_DISABLE |
1097                                COH901318_CX_CFG_TC_IRQ_ENABLE |
1098                                COH901318_CX_CFG_BE_IRQ_ENABLE,
1099                .param.ctrl_lli_chained = 0 |
1100                                COH901318_CX_CTRL_TC_ENABLE |
1101                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1102                                COH901318_CX_CTRL_TCP_DISABLE |
1103                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
1104                                COH901318_CX_CTRL_HSP_ENABLE |
1105                                COH901318_CX_CTRL_HSS_DISABLE |
1106                                COH901318_CX_CTRL_DDMA_LEGACY,
1107                .param.ctrl_lli = 0 |
1108                                COH901318_CX_CTRL_TC_ENABLE |
1109                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1110                                COH901318_CX_CTRL_TCP_DISABLE |
1111                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1112                                COH901318_CX_CTRL_HSP_ENABLE |
1113                                COH901318_CX_CTRL_HSS_DISABLE |
1114                                COH901318_CX_CTRL_DDMA_LEGACY,
1115                .param.ctrl_lli_last = 0 |
1116                                COH901318_CX_CTRL_TC_ENABLE |
1117                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1118                                COH901318_CX_CTRL_TCP_DISABLE |
1119                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1120                                COH901318_CX_CTRL_HSP_ENABLE |
1121                                COH901318_CX_CTRL_HSS_DISABLE |
1122                                COH901318_CX_CTRL_DDMA_LEGACY,
1123        },
1124        {
1125                .number = U300_DMA_SPI_RX,
1126                .name = "SPI RX",
1127                .priority_high = 0,
1128                .param.config = COH901318_CX_CFG_CH_DISABLE |
1129                                COH901318_CX_CFG_LCR_DISABLE |
1130                                COH901318_CX_CFG_TC_IRQ_ENABLE |
1131                                COH901318_CX_CFG_BE_IRQ_ENABLE,
1132                .param.ctrl_lli_chained = 0 |
1133                                COH901318_CX_CTRL_TC_ENABLE |
1134                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1135                                COH901318_CX_CTRL_TCP_DISABLE |
1136                                COH901318_CX_CTRL_TC_IRQ_DISABLE |
1137                                COH901318_CX_CTRL_HSP_ENABLE |
1138                                COH901318_CX_CTRL_HSS_DISABLE |
1139                                COH901318_CX_CTRL_DDMA_LEGACY,
1140                .param.ctrl_lli = 0 |
1141                                COH901318_CX_CTRL_TC_ENABLE |
1142                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1143                                COH901318_CX_CTRL_TCP_DISABLE |
1144                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1145                                COH901318_CX_CTRL_HSP_ENABLE |
1146                                COH901318_CX_CTRL_HSS_DISABLE |
1147                                COH901318_CX_CTRL_DDMA_LEGACY,
1148                .param.ctrl_lli_last = 0 |
1149                                COH901318_CX_CTRL_TC_ENABLE |
1150                                COH901318_CX_CTRL_MASTER_MODE_M1RW |
1151                                COH901318_CX_CTRL_TCP_DISABLE |
1152                                COH901318_CX_CTRL_TC_IRQ_ENABLE |
1153                                COH901318_CX_CTRL_HSP_ENABLE |
1154                                COH901318_CX_CTRL_HSS_DISABLE |
1155                                COH901318_CX_CTRL_DDMA_LEGACY,
1156
1157        },
1158        {
1159                .number = U300_DMA_GENERAL_PURPOSE_0,
1160                .name = "GENERAL 00",
1161                .priority_high = 0,
1162
1163                .param.config = flags_memcpy_config,
1164                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1165                .param.ctrl_lli = flags_memcpy_lli,
1166                .param.ctrl_lli_last = flags_memcpy_lli_last,
1167        },
1168        {
1169                .number = U300_DMA_GENERAL_PURPOSE_1,
1170                .name = "GENERAL 01",
1171                .priority_high = 0,
1172
1173                .param.config = flags_memcpy_config,
1174                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1175                .param.ctrl_lli = flags_memcpy_lli,
1176                .param.ctrl_lli_last = flags_memcpy_lli_last,
1177        },
1178        {
1179                .number = U300_DMA_GENERAL_PURPOSE_2,
1180                .name = "GENERAL 02",
1181                .priority_high = 0,
1182
1183                .param.config = flags_memcpy_config,
1184                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1185                .param.ctrl_lli = flags_memcpy_lli,
1186                .param.ctrl_lli_last = flags_memcpy_lli_last,
1187        },
1188        {
1189                .number = U300_DMA_GENERAL_PURPOSE_3,
1190                .name = "GENERAL 03",
1191                .priority_high = 0,
1192
1193                .param.config = flags_memcpy_config,
1194                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1195                .param.ctrl_lli = flags_memcpy_lli,
1196                .param.ctrl_lli_last = flags_memcpy_lli_last,
1197        },
1198        {
1199                .number = U300_DMA_GENERAL_PURPOSE_4,
1200                .name = "GENERAL 04",
1201                .priority_high = 0,
1202
1203                .param.config = flags_memcpy_config,
1204                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1205                .param.ctrl_lli = flags_memcpy_lli,
1206                .param.ctrl_lli_last = flags_memcpy_lli_last,
1207        },
1208        {
1209                .number = U300_DMA_GENERAL_PURPOSE_5,
1210                .name = "GENERAL 05",
1211                .priority_high = 0,
1212
1213                .param.config = flags_memcpy_config,
1214                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1215                .param.ctrl_lli = flags_memcpy_lli,
1216                .param.ctrl_lli_last = flags_memcpy_lli_last,
1217        },
1218        {
1219                .number = U300_DMA_GENERAL_PURPOSE_6,
1220                .name = "GENERAL 06",
1221                .priority_high = 0,
1222
1223                .param.config = flags_memcpy_config,
1224                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1225                .param.ctrl_lli = flags_memcpy_lli,
1226                .param.ctrl_lli_last = flags_memcpy_lli_last,
1227        },
1228        {
1229                .number = U300_DMA_GENERAL_PURPOSE_7,
1230                .name = "GENERAL 07",
1231                .priority_high = 0,
1232
1233                .param.config = flags_memcpy_config,
1234                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1235                .param.ctrl_lli = flags_memcpy_lli,
1236                .param.ctrl_lli_last = flags_memcpy_lli_last,
1237        },
1238        {
1239                .number = U300_DMA_GENERAL_PURPOSE_8,
1240                .name = "GENERAL 08",
1241                .priority_high = 0,
1242
1243                .param.config = flags_memcpy_config,
1244                .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1245                .param.ctrl_lli = flags_memcpy_lli,
1246                .param.ctrl_lli_last = flags_memcpy_lli_last,
1247        },
1248        {
1249                .number = U300_DMA_UART1_TX,
1250                .name = "UART1 TX",
1251                .priority_high = 0,
1252        },
1253        {
1254                .number = U300_DMA_UART1_RX,
1255                .name = "UART1 RX",
1256                .priority_high = 0,
1257        }
1258};
1259
1260#define COHC_2_DEV(cohc) (&cohc->chan.dev->device)
1261
1262#ifdef VERBOSE_DEBUG
1263#define COH_DBG(x) ({ if (1) x; 0; })
1264#else
1265#define COH_DBG(x) ({ if (0) x; 0; })
1266#endif
1267
1268struct coh901318_desc {
1269        struct dma_async_tx_descriptor desc;
1270        struct list_head node;
1271        struct scatterlist *sg;
1272        unsigned int sg_len;
1273        struct coh901318_lli *lli;
1274        enum dma_transfer_direction dir;
1275        unsigned long flags;
1276        u32 head_config;
1277        u32 head_ctrl;
1278};
1279
1280struct coh901318_base {
1281        struct device *dev;
1282        void __iomem *virtbase;
1283        struct coh901318_pool pool;
1284        struct powersave pm;
1285        struct dma_device dma_slave;
1286        struct dma_device dma_memcpy;
1287        struct coh901318_chan *chans;
1288};
1289
1290struct coh901318_chan {
1291        spinlock_t lock;
1292        int allocated;
1293        int id;
1294        int stopped;
1295
1296        struct work_struct free_work;
1297        struct dma_chan chan;
1298
1299        struct tasklet_struct tasklet;
1300
1301        struct list_head active;
1302        struct list_head queue;
1303        struct list_head free;
1304
1305        unsigned long nbr_active_done;
1306        unsigned long busy;
1307
1308        u32 addr;
1309        u32 ctrl;
1310
1311        struct coh901318_base *base;
1312};
1313
1314static void coh901318_list_print(struct coh901318_chan *cohc,
1315                                 struct coh901318_lli *lli)
1316{
1317        struct coh901318_lli *l = lli;
1318        int i = 0;
1319
1320        while (l) {
1321                dev_vdbg(COHC_2_DEV(cohc), "i %d, lli %p, ctrl 0x%x, src 0x%x"
1322                         ", dst 0x%x, link 0x%x virt_link_addr 0x%p\n",
1323                         i, l, l->control, l->src_addr, l->dst_addr,
1324                         l->link_addr, l->virt_link_addr);
1325                i++;
1326                l = l->virt_link_addr;
1327        }
1328}
1329
1330#ifdef CONFIG_DEBUG_FS
1331
1332#define COH901318_DEBUGFS_ASSIGN(x, y) (x = y)
1333
1334static struct coh901318_base *debugfs_dma_base;
1335static struct dentry *dma_dentry;
1336
1337static int coh901318_debugfs_read(struct file *file, char __user *buf,
1338                                  size_t count, loff_t *f_pos)
1339{
1340        u64 started_channels = debugfs_dma_base->pm.started_channels;
1341        int pool_count = debugfs_dma_base->pool.debugfs_pool_counter;
1342        char *dev_buf;
1343        char *tmp;
1344        int ret;
1345        int i;
1346
1347        dev_buf = kmalloc(4*1024, GFP_KERNEL);
1348        if (dev_buf == NULL)
1349                return -ENOMEM;
1350        tmp = dev_buf;
1351
1352        tmp += sprintf(tmp, "DMA -- enabled dma channels\n");
1353
1354        for (i = 0; i < U300_DMA_CHANNELS; i++)
1355                if (started_channels & (1 << i))
1356                        tmp += sprintf(tmp, "channel %d\n", i);
1357
1358        tmp += sprintf(tmp, "Pool alloc nbr %d\n", pool_count);
1359
1360        ret = simple_read_from_buffer(buf, count, f_pos, dev_buf, 
1361                                        tmp - dev_buf);
1362        kfree(dev_buf);
1363        return ret;
1364}
1365
1366static const struct file_operations coh901318_debugfs_status_operations = {
1367        .owner          = THIS_MODULE,
1368        .open           = simple_open,
1369        .read           = coh901318_debugfs_read,
1370        .llseek         = default_llseek,
1371};
1372
1373
1374static int __init init_coh901318_debugfs(void)
1375{
1376
1377        dma_dentry = debugfs_create_dir("dma", NULL);
1378
1379        (void) debugfs_create_file("status",
1380                                   S_IFREG | S_IRUGO,
1381                                   dma_dentry, NULL,
1382                                   &coh901318_debugfs_status_operations);
1383        return 0;
1384}
1385
1386static void __exit exit_coh901318_debugfs(void)
1387{
1388        debugfs_remove_recursive(dma_dentry);
1389}
1390
1391module_init(init_coh901318_debugfs);
1392module_exit(exit_coh901318_debugfs);
1393#else
1394
1395#define COH901318_DEBUGFS_ASSIGN(x, y)
1396
1397#endif /* CONFIG_DEBUG_FS */
1398
1399static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan)
1400{
1401        return container_of(chan, struct coh901318_chan, chan);
1402}
1403
1404static inline const struct coh901318_params *
1405cohc_chan_param(struct coh901318_chan *cohc)
1406{
1407        return &chan_config[cohc->id].param;
1408}
1409
1410static inline const struct coh_dma_channel *
1411cohc_chan_conf(struct coh901318_chan *cohc)
1412{
1413        return &chan_config[cohc->id];
1414}
1415
1416static void enable_powersave(struct coh901318_chan *cohc)
1417{
1418        unsigned long flags;
1419        struct powersave *pm = &cohc->base->pm;
1420
1421        spin_lock_irqsave(&pm->lock, flags);
1422
1423        pm->started_channels &= ~(1ULL << cohc->id);
1424
1425        spin_unlock_irqrestore(&pm->lock, flags);
1426}
1427static void disable_powersave(struct coh901318_chan *cohc)
1428{
1429        unsigned long flags;
1430        struct powersave *pm = &cohc->base->pm;
1431
1432        spin_lock_irqsave(&pm->lock, flags);
1433
1434        pm->started_channels |= (1ULL << cohc->id);
1435
1436        spin_unlock_irqrestore(&pm->lock, flags);
1437}
1438
1439static inline int coh901318_set_ctrl(struct coh901318_chan *cohc, u32 control)
1440{
1441        int channel = cohc->id;
1442        void __iomem *virtbase = cohc->base->virtbase;
1443
1444        writel(control,
1445               virtbase + COH901318_CX_CTRL +
1446               COH901318_CX_CTRL_SPACING * channel);
1447        return 0;
1448}
1449
1450static inline int coh901318_set_conf(struct coh901318_chan *cohc, u32 conf)
1451{
1452        int channel = cohc->id;
1453        void __iomem *virtbase = cohc->base->virtbase;
1454
1455        writel(conf,
1456               virtbase + COH901318_CX_CFG +
1457               COH901318_CX_CFG_SPACING*channel);
1458        return 0;
1459}
1460
1461
1462static int coh901318_start(struct coh901318_chan *cohc)
1463{
1464        u32 val;
1465        int channel = cohc->id;
1466        void __iomem *virtbase = cohc->base->virtbase;
1467
1468        disable_powersave(cohc);
1469
1470        val = readl(virtbase + COH901318_CX_CFG +
1471                    COH901318_CX_CFG_SPACING * channel);
1472
1473        /* Enable channel */
1474        val |= COH901318_CX_CFG_CH_ENABLE;
1475        writel(val, virtbase + COH901318_CX_CFG +
1476               COH901318_CX_CFG_SPACING * channel);
1477
1478        return 0;
1479}
1480
1481static int coh901318_prep_linked_list(struct coh901318_chan *cohc,
1482                                      struct coh901318_lli *lli)
1483{
1484        int channel = cohc->id;
1485        void __iomem *virtbase = cohc->base->virtbase;
1486
1487        BUG_ON(readl(virtbase + COH901318_CX_STAT +
1488                     COH901318_CX_STAT_SPACING*channel) &
1489               COH901318_CX_STAT_ACTIVE);
1490
1491        writel(lli->src_addr,
1492               virtbase + COH901318_CX_SRC_ADDR +
1493               COH901318_CX_SRC_ADDR_SPACING * channel);
1494
1495        writel(lli->dst_addr, virtbase +
1496               COH901318_CX_DST_ADDR +
1497               COH901318_CX_DST_ADDR_SPACING * channel);
1498
1499        writel(lli->link_addr, virtbase + COH901318_CX_LNK_ADDR +
1500               COH901318_CX_LNK_ADDR_SPACING * channel);
1501
1502        writel(lli->control, virtbase + COH901318_CX_CTRL +
1503               COH901318_CX_CTRL_SPACING * channel);
1504
1505        return 0;
1506}
1507
1508static struct coh901318_desc *
1509coh901318_desc_get(struct coh901318_chan *cohc)
1510{
1511        struct coh901318_desc *desc;
1512
1513        if (list_empty(&cohc->free)) {
1514                /* alloc new desc because we're out of used ones
1515                 * TODO: alloc a pile of descs instead of just one,
1516                 * avoid many small allocations.
1517                 */
1518                desc = kzalloc(sizeof(struct coh901318_desc), GFP_NOWAIT);
1519                if (desc == NULL)
1520                        goto out;
1521                INIT_LIST_HEAD(&desc->node);
1522                dma_async_tx_descriptor_init(&desc->desc, &cohc->chan);
1523        } else {
1524                /* Reuse an old desc. */
1525                desc = list_first_entry(&cohc->free,
1526                                        struct coh901318_desc,
1527                                        node);
1528                list_del(&desc->node);
1529                /* Initialize it a bit so it's not insane */
1530                desc->sg = NULL;
1531                desc->sg_len = 0;
1532                desc->desc.callback = NULL;
1533                desc->desc.callback_param = NULL;
1534        }
1535
1536 out:
1537        return desc;
1538}
1539
1540static void
1541coh901318_desc_free(struct coh901318_chan *cohc, struct coh901318_desc *cohd)
1542{
1543        list_add_tail(&cohd->node, &cohc->free);
1544}
1545
1546/* call with irq lock held */
1547static void
1548coh901318_desc_submit(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1549{
1550        list_add_tail(&desc->node, &cohc->active);
1551}
1552
1553static struct coh901318_desc *
1554coh901318_first_active_get(struct coh901318_chan *cohc)
1555{
1556        struct coh901318_desc *d;
1557
1558        if (list_empty(&cohc->active))
1559                return NULL;
1560
1561        d = list_first_entry(&cohc->active,
1562                             struct coh901318_desc,
1563                             node);
1564        return d;
1565}
1566
1567static void
1568coh901318_desc_remove(struct coh901318_desc *cohd)
1569{
1570        list_del(&cohd->node);
1571}
1572
1573static void
1574coh901318_desc_queue(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1575{
1576        list_add_tail(&desc->node, &cohc->queue);
1577}
1578
1579static struct coh901318_desc *
1580coh901318_first_queued(struct coh901318_chan *cohc)
1581{
1582        struct coh901318_desc *d;
1583
1584        if (list_empty(&cohc->queue))
1585                return NULL;
1586
1587        d = list_first_entry(&cohc->queue,
1588                             struct coh901318_desc,
1589                             node);
1590        return d;
1591}
1592
1593static inline u32 coh901318_get_bytes_in_lli(struct coh901318_lli *in_lli)
1594{
1595        struct coh901318_lli *lli = in_lli;
1596        u32 bytes = 0;
1597
1598        while (lli) {
1599                bytes += lli->control & COH901318_CX_CTRL_TC_VALUE_MASK;
1600                lli = lli->virt_link_addr;
1601        }
1602        return bytes;
1603}
1604
1605/*
1606 * Get the number of bytes left to transfer on this channel,
1607 * it is unwise to call this before stopping the channel for
1608 * absolute measures, but for a rough guess you can still call
1609 * it.
1610 */
1611static u32 coh901318_get_bytes_left(struct dma_chan *chan)
1612{
1613        struct coh901318_chan *cohc = to_coh901318_chan(chan);
1614        struct coh901318_desc *cohd;
1615        struct list_head *pos;
1616        unsigned long flags;
1617        u32 left = 0;
1618        int i = 0;
1619
1620        spin_lock_irqsave(&cohc->lock, flags);
1621
1622        /*
1623         * If there are many queued jobs, we iterate and add the
1624         * size of them all. We take a special look on the first
1625         * job though, since it is probably active.
1626         */
1627        list_for_each(pos, &cohc->active) {
1628                /*
1629                 * The first job in the list will be working on the
1630                 * hardware. The job can be stopped but still active,
1631                 * so that the transfer counter is somewhere inside
1632                 * the buffer.
1633                 */
1634                cohd = list_entry(pos, struct coh901318_desc, node);
1635
1636                if (i == 0) {
1637                        struct coh901318_lli *lli;
1638                        dma_addr_t ladd;
1639
1640                        /* Read current transfer count value */
1641                        left = readl(cohc->base->virtbase +
1642                                     COH901318_CX_CTRL +
1643                                     COH901318_CX_CTRL_SPACING * cohc->id) &
1644                                COH901318_CX_CTRL_TC_VALUE_MASK;
1645
1646                        /* See if the transfer is linked... */
1647                        ladd = readl(cohc->base->virtbase +
1648                                     COH901318_CX_LNK_ADDR +
1649                                     COH901318_CX_LNK_ADDR_SPACING *
1650                                     cohc->id) &
1651                                ~COH901318_CX_LNK_LINK_IMMEDIATE;
1652                        /* Single transaction */
1653                        if (!ladd)
1654                                continue;
1655
1656                        /*
1657                         * Linked transaction, follow the lli, find the
1658                         * currently processing lli, and proceed to the next
1659                         */
1660                        lli = cohd->lli;
1661                        while (lli && lli->link_addr != ladd)
1662                                lli = lli->virt_link_addr;
1663
1664                        if (lli)
1665                                lli = lli->virt_link_addr;
1666
1667                        /*
1668                         * Follow remaining lli links around to count the total
1669                         * number of bytes left
1670                         */
1671                        left += coh901318_get_bytes_in_lli(lli);
1672                } else {
1673                        left += coh901318_get_bytes_in_lli(cohd->lli);
1674                }
1675                i++;
1676        }
1677
1678        /* Also count bytes in the queued jobs */
1679        list_for_each(pos, &cohc->queue) {
1680                cohd = list_entry(pos, struct coh901318_desc, node);
1681                left += coh901318_get_bytes_in_lli(cohd->lli);
1682        }
1683
1684        spin_unlock_irqrestore(&cohc->lock, flags);
1685
1686        return left;
1687}
1688
1689/*
1690 * Pauses a transfer without losing data. Enables power save.
1691 * Use this function in conjunction with coh901318_resume.
1692 */
1693static int coh901318_pause(struct dma_chan *chan)
1694{
1695        u32 val;
1696        unsigned long flags;
1697        struct coh901318_chan *cohc = to_coh901318_chan(chan);
1698        int channel = cohc->id;
1699        void __iomem *virtbase = cohc->base->virtbase;
1700
1701        spin_lock_irqsave(&cohc->lock, flags);
1702
1703        /* Disable channel in HW */
1704        val = readl(virtbase + COH901318_CX_CFG +
1705                    COH901318_CX_CFG_SPACING * channel);
1706
1707        /* Stopping infinite transfer */
1708        if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 &&
1709            (val & COH901318_CX_CFG_CH_ENABLE))
1710                cohc->stopped = 1;
1711
1712
1713        val &= ~COH901318_CX_CFG_CH_ENABLE;
1714        /* Enable twice, HW bug work around */
1715        writel(val, virtbase + COH901318_CX_CFG +
1716               COH901318_CX_CFG_SPACING * channel);
1717        writel(val, virtbase + COH901318_CX_CFG +
1718               COH901318_CX_CFG_SPACING * channel);
1719
1720        /* Spin-wait for it to actually go inactive */
1721        while (readl(virtbase + COH901318_CX_STAT+COH901318_CX_STAT_SPACING *
1722                     channel) & COH901318_CX_STAT_ACTIVE)
1723                cpu_relax();
1724
1725        /* Check if we stopped an active job */
1726        if ((readl(virtbase + COH901318_CX_CTRL+COH901318_CX_CTRL_SPACING *
1727                   channel) & COH901318_CX_CTRL_TC_VALUE_MASK) > 0)
1728                cohc->stopped = 1;
1729
1730        enable_powersave(cohc);
1731
1732        spin_unlock_irqrestore(&cohc->lock, flags);
1733        return 0;
1734}
1735
1736/* Resumes a transfer that has been stopped via 300_dma_stop(..).
1737   Power save is handled.
1738*/
1739static int coh901318_resume(struct dma_chan *chan)
1740{
1741        u32 val;
1742        unsigned long flags;
1743        struct coh901318_chan *cohc = to_coh901318_chan(chan);
1744        int channel = cohc->id;
1745
1746        spin_lock_irqsave(&cohc->lock, flags);
1747
1748        disable_powersave(cohc);
1749
1750        if (cohc->stopped) {
1751                /* Enable channel in HW */
1752                val = readl(cohc->base->virtbase + COH901318_CX_CFG +
1753                            COH901318_CX_CFG_SPACING * channel);
1754
1755                val |= COH901318_CX_CFG_CH_ENABLE;
1756
1757                writel(val, cohc->base->virtbase + COH901318_CX_CFG +
1758                       COH901318_CX_CFG_SPACING*channel);
1759
1760                cohc->stopped = 0;
1761        }
1762
1763        spin_unlock_irqrestore(&cohc->lock, flags);
1764        return 0;
1765}
1766
1767bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
1768{
1769        unsigned int ch_nr = (unsigned int) chan_id;
1770
1771        if (ch_nr == to_coh901318_chan(chan)->id)
1772                return true;
1773
1774        return false;
1775}
1776EXPORT_SYMBOL(coh901318_filter_id);
1777
1778struct coh901318_filter_args {
1779        struct coh901318_base *base;
1780        unsigned int ch_nr;
1781};
1782
1783static bool coh901318_filter_base_and_id(struct dma_chan *chan, void *data)
1784{
1785        struct coh901318_filter_args *args = data;
1786
1787        if (&args->base->dma_slave == chan->device &&
1788            args->ch_nr == to_coh901318_chan(chan)->id)
1789                return true;
1790
1791        return false;
1792}
1793
1794static struct dma_chan *coh901318_xlate(struct of_phandle_args *dma_spec,
1795                                        struct of_dma *ofdma)
1796{
1797        struct coh901318_filter_args args = {
1798                .base = ofdma->of_dma_data,
1799                .ch_nr = dma_spec->args[0],
1800        };
1801        dma_cap_mask_t cap;
1802        dma_cap_zero(cap);
1803        dma_cap_set(DMA_SLAVE, cap);
1804
1805        return dma_request_channel(cap, coh901318_filter_base_and_id, &args);
1806}
1807/*
1808 * DMA channel allocation
1809 */
1810static int coh901318_config(struct coh901318_chan *cohc,
1811                            struct coh901318_params *param)
1812{
1813        unsigned long flags;
1814        const struct coh901318_params *p;
1815        int channel = cohc->id;
1816        void __iomem *virtbase = cohc->base->virtbase;
1817
1818        spin_lock_irqsave(&cohc->lock, flags);
1819
1820        if (param)
1821                p = param;
1822        else
1823                p = cohc_chan_param(cohc);
1824
1825        /* Clear any pending BE or TC interrupt */
1826        if (channel < 32) {
1827                writel(1 << channel, virtbase + COH901318_BE_INT_CLEAR1);
1828                writel(1 << channel, virtbase + COH901318_TC_INT_CLEAR1);
1829        } else {
1830                writel(1 << (channel - 32), virtbase +
1831                       COH901318_BE_INT_CLEAR2);
1832                writel(1 << (channel - 32), virtbase +
1833                       COH901318_TC_INT_CLEAR2);
1834        }
1835
1836        coh901318_set_conf(cohc, p->config);
1837        coh901318_set_ctrl(cohc, p->ctrl_lli_last);
1838
1839        spin_unlock_irqrestore(&cohc->lock, flags);
1840
1841        return 0;
1842}
1843
1844/* must lock when calling this function
1845 * start queued jobs, if any
1846 * TODO: start all queued jobs in one go
1847 *
1848 * Returns descriptor if queued job is started otherwise NULL.
1849 * If the queue is empty NULL is returned.
1850 */
1851static struct coh901318_desc *coh901318_queue_start(struct coh901318_chan *cohc)
1852{
1853        struct coh901318_desc *cohd;
1854
1855        /*
1856         * start queued jobs, if any
1857         * TODO: transmit all queued jobs in one go
1858         */
1859        cohd = coh901318_first_queued(cohc);
1860
1861        if (cohd != NULL) {
1862                /* Remove from queue */
1863                coh901318_desc_remove(cohd);
1864                /* initiate DMA job */
1865                cohc->busy = 1;
1866
1867                coh901318_desc_submit(cohc, cohd);
1868
1869                /* Program the transaction head */
1870                coh901318_set_conf(cohc, cohd->head_config);
1871                coh901318_set_ctrl(cohc, cohd->head_ctrl);
1872                coh901318_prep_linked_list(cohc, cohd->lli);
1873
1874                /* start dma job on this channel */
1875                coh901318_start(cohc);
1876
1877        }
1878
1879        return cohd;
1880}
1881
1882/*
1883 * This tasklet is called from the interrupt handler to
1884 * handle each descriptor (DMA job) that is sent to a channel.
1885 */
1886static void dma_tasklet(unsigned long data)
1887{
1888        struct coh901318_chan *cohc = (struct coh901318_chan *) data;
1889        struct coh901318_desc *cohd_fin;
1890        unsigned long flags;
1891        dma_async_tx_callback callback;
1892        void *callback_param;
1893
1894        dev_vdbg(COHC_2_DEV(cohc), "[%s] chan_id %d"
1895                 " nbr_active_done %ld\n", __func__,
1896                 cohc->id, cohc->nbr_active_done);
1897
1898        spin_lock_irqsave(&cohc->lock, flags);
1899
1900        /* get first active descriptor entry from list */
1901        cohd_fin = coh901318_first_active_get(cohc);
1902
1903        if (cohd_fin == NULL)
1904                goto err;
1905
1906        /* locate callback to client */
1907        callback = cohd_fin->desc.callback;
1908        callback_param = cohd_fin->desc.callback_param;
1909
1910        /* sign this job as completed on the channel */
1911        dma_cookie_complete(&cohd_fin->desc);
1912
1913        /* release the lli allocation and remove the descriptor */
1914        coh901318_lli_free(&cohc->base->pool, &cohd_fin->lli);
1915
1916        /* return desc to free-list */
1917        coh901318_desc_remove(cohd_fin);
1918        coh901318_desc_free(cohc, cohd_fin);
1919
1920        spin_unlock_irqrestore(&cohc->lock, flags);
1921
1922        /* Call the callback when we're done */
1923        if (callback)
1924                callback(callback_param);
1925
1926        spin_lock_irqsave(&cohc->lock, flags);
1927
1928        /*
1929         * If another interrupt fired while the tasklet was scheduling,
1930         * we don't get called twice, so we have this number of active
1931         * counter that keep track of the number of IRQs expected to
1932         * be handled for this channel. If there happen to be more than
1933         * one IRQ to be ack:ed, we simply schedule this tasklet again.
1934         */
1935        cohc->nbr_active_done--;
1936        if (cohc->nbr_active_done) {
1937                dev_dbg(COHC_2_DEV(cohc), "scheduling tasklet again, new IRQs "
1938                        "came in while we were scheduling this tasklet\n");
1939                if (cohc_chan_conf(cohc)->priority_high)
1940                        tasklet_hi_schedule(&cohc->tasklet);
1941                else
1942                        tasklet_schedule(&cohc->tasklet);
1943        }
1944
1945        spin_unlock_irqrestore(&cohc->lock, flags);
1946
1947        return;
1948
1949 err:
1950        spin_unlock_irqrestore(&cohc->lock, flags);
1951        dev_err(COHC_2_DEV(cohc), "[%s] No active dma desc\n", __func__);
1952}
1953
1954
1955/* called from interrupt context */
1956static void dma_tc_handle(struct coh901318_chan *cohc)
1957{
1958        /*
1959         * If the channel is not allocated, then we shouldn't have
1960         * any TC interrupts on it.
1961         */
1962        if (!cohc->allocated) {
1963                dev_err(COHC_2_DEV(cohc), "spurious interrupt from "
1964                        "unallocated channel\n");
1965                return;
1966        }
1967
1968        spin_lock(&cohc->lock);
1969
1970        /*
1971         * When we reach this point, at least one queue item
1972         * should have been moved over from cohc->queue to
1973         * cohc->active and run to completion, that is why we're
1974         * getting a terminal count interrupt is it not?
1975         * If you get this BUG() the most probable cause is that
1976         * the individual nodes in the lli chain have IRQ enabled,
1977         * so check your platform config for lli chain ctrl.
1978         */
1979        BUG_ON(list_empty(&cohc->active));
1980
1981        cohc->nbr_active_done++;
1982
1983        /*
1984         * This attempt to take a job from cohc->queue, put it
1985         * into cohc->active and start it.
1986         */
1987        if (coh901318_queue_start(cohc) == NULL)
1988                cohc->busy = 0;
1989
1990        spin_unlock(&cohc->lock);
1991
1992        /*
1993         * This tasklet will remove items from cohc->active
1994         * and thus terminates them.
1995         */
1996        if (cohc_chan_conf(cohc)->priority_high)
1997                tasklet_hi_schedule(&cohc->tasklet);
1998        else
1999                tasklet_schedule(&cohc->tasklet);
2000}
2001
2002
2003static irqreturn_t dma_irq_handler(int irq, void *dev_id)
2004{
2005        u32 status1;
2006        u32 status2;
2007        int i;
2008        int ch;
2009        struct coh901318_base *base  = dev_id;
2010        struct coh901318_chan *cohc;
2011        void __iomem *virtbase = base->virtbase;
2012
2013        status1 = readl(virtbase + COH901318_INT_STATUS1);
2014        status2 = readl(virtbase + COH901318_INT_STATUS2);
2015
2016        if (unlikely(status1 == 0 && status2 == 0)) {
2017                dev_warn(base->dev, "spurious DMA IRQ from no channel!\n");
2018                return IRQ_HANDLED;
2019        }
2020
2021        /* TODO: consider handle IRQ in tasklet here to
2022         *       minimize interrupt latency */
2023
2024        /* Check the first 32 DMA channels for IRQ */
2025        while (status1) {
2026                /* Find first bit set, return as a number. */
2027                i = ffs(status1) - 1;
2028                ch = i;
2029
2030                cohc = &base->chans[ch];
2031                spin_lock(&cohc->lock);
2032
2033                /* Mask off this bit */
2034                status1 &= ~(1 << i);
2035                /* Check the individual channel bits */
2036                if (test_bit(i, virtbase + COH901318_BE_INT_STATUS1)) {
2037                        dev_crit(COHC_2_DEV(cohc),
2038                                 "DMA bus error on channel %d!\n", ch);
2039                        BUG_ON(1);
2040                        /* Clear BE interrupt */
2041                        __set_bit(i, virtbase + COH901318_BE_INT_CLEAR1);
2042                } else {
2043                        /* Caused by TC, really? */
2044                        if (unlikely(!test_bit(i, virtbase +
2045                                               COH901318_TC_INT_STATUS1))) {
2046                                dev_warn(COHC_2_DEV(cohc),
2047                                         "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2048                                /* Clear TC interrupt */
2049                                BUG_ON(1);
2050                                __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2051                        } else {
2052                                /* Enable powersave if transfer has finished */
2053                                if (!(readl(virtbase + COH901318_CX_STAT +
2054                                            COH901318_CX_STAT_SPACING*ch) &
2055                                      COH901318_CX_STAT_ENABLED)) {
2056                                        enable_powersave(cohc);
2057                                }
2058
2059                                /* Must clear TC interrupt before calling
2060                                 * dma_tc_handle
2061                                 * in case tc_handle initiate a new dma job
2062                                 */
2063                                __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2064
2065                                dma_tc_handle(cohc);
2066                        }
2067                }
2068                spin_unlock(&cohc->lock);
2069        }
2070
2071        /* Check the remaining 32 DMA channels for IRQ */
2072        while (status2) {
2073                /* Find first bit set, return as a number. */
2074                i = ffs(status2) - 1;
2075                ch = i + 32;
2076                cohc = &base->chans[ch];
2077                spin_lock(&cohc->lock);
2078
2079                /* Mask off this bit */
2080                status2 &= ~(1 << i);
2081                /* Check the individual channel bits */
2082                if (test_bit(i, virtbase + COH901318_BE_INT_STATUS2)) {
2083                        dev_crit(COHC_2_DEV(cohc),
2084                                 "DMA bus error on channel %d!\n", ch);
2085                        /* Clear BE interrupt */
2086                        BUG_ON(1);
2087                        __set_bit(i, virtbase + COH901318_BE_INT_CLEAR2);
2088                } else {
2089                        /* Caused by TC, really? */
2090                        if (unlikely(!test_bit(i, virtbase +
2091                                               COH901318_TC_INT_STATUS2))) {
2092                                dev_warn(COHC_2_DEV(cohc),
2093                                         "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2094                                /* Clear TC interrupt */
2095                                __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2096                                BUG_ON(1);
2097                        } else {
2098                                /* Enable powersave if transfer has finished */
2099                                if (!(readl(virtbase + COH901318_CX_STAT +
2100                                            COH901318_CX_STAT_SPACING*ch) &
2101                                      COH901318_CX_STAT_ENABLED)) {
2102                                        enable_powersave(cohc);
2103                                }
2104                                /* Must clear TC interrupt before calling
2105                                 * dma_tc_handle
2106                                 * in case tc_handle initiate a new dma job
2107                                 */
2108                                __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2109
2110                                dma_tc_handle(cohc);
2111                        }
2112                }
2113                spin_unlock(&cohc->lock);
2114        }
2115
2116        return IRQ_HANDLED;
2117}
2118
2119static int coh901318_terminate_all(struct dma_chan *chan)
2120{
2121        unsigned long flags;
2122        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2123        struct coh901318_desc *cohd;
2124        void __iomem *virtbase = cohc->base->virtbase;
2125
2126        /* The remainder of this function terminates the transfer */
2127        coh901318_pause(chan);
2128        spin_lock_irqsave(&cohc->lock, flags);
2129
2130        /* Clear any pending BE or TC interrupt */
2131        if (cohc->id < 32) {
2132                writel(1 << cohc->id, virtbase + COH901318_BE_INT_CLEAR1);
2133                writel(1 << cohc->id, virtbase + COH901318_TC_INT_CLEAR1);
2134        } else {
2135                writel(1 << (cohc->id - 32), virtbase +
2136                       COH901318_BE_INT_CLEAR2);
2137                writel(1 << (cohc->id - 32), virtbase +
2138                       COH901318_TC_INT_CLEAR2);
2139        }
2140
2141        enable_powersave(cohc);
2142
2143        while ((cohd = coh901318_first_active_get(cohc))) {
2144                /* release the lli allocation*/
2145                coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2146
2147                /* return desc to free-list */
2148                coh901318_desc_remove(cohd);
2149                coh901318_desc_free(cohc, cohd);
2150        }
2151
2152        while ((cohd = coh901318_first_queued(cohc))) {
2153                /* release the lli allocation*/
2154                coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2155
2156                /* return desc to free-list */
2157                coh901318_desc_remove(cohd);
2158                coh901318_desc_free(cohc, cohd);
2159        }
2160
2161
2162        cohc->nbr_active_done = 0;
2163        cohc->busy = 0;
2164
2165        spin_unlock_irqrestore(&cohc->lock, flags);
2166
2167        return 0;
2168}
2169
2170static int coh901318_alloc_chan_resources(struct dma_chan *chan)
2171{
2172        struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2173        unsigned long flags;
2174
2175        dev_vdbg(COHC_2_DEV(cohc), "[%s] DMA channel %d\n",
2176                 __func__, cohc->id);
2177
2178        if (chan->client_count > 1)
2179                return -EBUSY;
2180
2181        spin_lock_irqsave(&cohc->lock, flags);
2182
2183        coh901318_config(cohc, NULL);
2184
2185        cohc->allocated = 1;
2186        dma_cookie_init(chan);
2187
2188        spin_unlock_irqrestore(&cohc->lock, flags);
2189
2190        return 1;
2191}
2192
2193static void
2194coh901318_free_chan_resources(struct dma_chan *chan)
2195{
2196        struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2197        int channel = cohc->id;
2198        unsigned long flags;
2199
2200        spin_lock_irqsave(&cohc->lock, flags);
2201
2202        /* Disable HW */
2203        writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CFG +
2204               COH901318_CX_CFG_SPACING*channel);
2205        writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CTRL +
2206               COH901318_CX_CTRL_SPACING*channel);
2207
2208        cohc->allocated = 0;
2209
2210        spin_unlock_irqrestore(&cohc->lock, flags);
2211
2212        coh901318_terminate_all(chan);
2213}
2214
2215
2216static dma_cookie_t
2217coh901318_tx_submit(struct dma_async_tx_descriptor *tx)
2218{
2219        struct coh901318_desc *cohd = container_of(tx, struct coh901318_desc,
2220                                                   desc);
2221        struct coh901318_chan *cohc = to_coh901318_chan(tx->chan);
2222        unsigned long flags;
2223        dma_cookie_t cookie;
2224
2225        spin_lock_irqsave(&cohc->lock, flags);
2226        cookie = dma_cookie_assign(tx);
2227
2228        coh901318_desc_queue(cohc, cohd);
2229
2230        spin_unlock_irqrestore(&cohc->lock, flags);
2231
2232        return cookie;
2233}
2234
2235static struct dma_async_tx_descriptor *
2236coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
2237                      size_t size, unsigned long flags)
2238{
2239        struct coh901318_lli *lli;
2240        struct coh901318_desc *cohd;
2241        unsigned long flg;
2242        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2243        int lli_len;
2244        u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2245        int ret;
2246
2247        spin_lock_irqsave(&cohc->lock, flg);
2248
2249        dev_vdbg(COHC_2_DEV(cohc),
2250                 "[%s] channel %d src 0x%x dest 0x%x size %d\n",
2251                 __func__, cohc->id, src, dest, size);
2252
2253        if (flags & DMA_PREP_INTERRUPT)
2254                /* Trigger interrupt after last lli */
2255                ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2256
2257        lli_len = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2258        if ((lli_len << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2259                lli_len++;
2260
2261        lli = coh901318_lli_alloc(&cohc->base->pool, lli_len);
2262
2263        if (lli == NULL)
2264                goto err;
2265
2266        ret = coh901318_lli_fill_memcpy(
2267                &cohc->base->pool, lli, src, size, dest,
2268                cohc_chan_param(cohc)->ctrl_lli_chained,
2269                ctrl_last);
2270        if (ret)
2271                goto err;
2272
2273        COH_DBG(coh901318_list_print(cohc, lli));
2274
2275        /* Pick a descriptor to handle this transfer */
2276        cohd = coh901318_desc_get(cohc);
2277        cohd->lli = lli;
2278        cohd->flags = flags;
2279        cohd->desc.tx_submit = coh901318_tx_submit;
2280
2281        spin_unlock_irqrestore(&cohc->lock, flg);
2282
2283        return &cohd->desc;
2284 err:
2285        spin_unlock_irqrestore(&cohc->lock, flg);
2286        return NULL;
2287}
2288
2289static struct dma_async_tx_descriptor *
2290coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2291                        unsigned int sg_len, enum dma_transfer_direction direction,
2292                        unsigned long flags, void *context)
2293{
2294        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2295        struct coh901318_lli *lli;
2296        struct coh901318_desc *cohd;
2297        const struct coh901318_params *params;
2298        struct scatterlist *sg;
2299        int len = 0;
2300        int size;
2301        int i;
2302        u32 ctrl_chained = cohc_chan_param(cohc)->ctrl_lli_chained;
2303        u32 ctrl = cohc_chan_param(cohc)->ctrl_lli;
2304        u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2305        u32 config;
2306        unsigned long flg;
2307        int ret;
2308
2309        if (!sgl)
2310                goto out;
2311        if (sg_dma_len(sgl) == 0)
2312                goto out;
2313
2314        spin_lock_irqsave(&cohc->lock, flg);
2315
2316        dev_vdbg(COHC_2_DEV(cohc), "[%s] sg_len %d dir %d\n",
2317                 __func__, sg_len, direction);
2318
2319        if (flags & DMA_PREP_INTERRUPT)
2320                /* Trigger interrupt after last lli */
2321                ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2322
2323        params = cohc_chan_param(cohc);
2324        config = params->config;
2325        /*
2326         * Add runtime-specific control on top, make
2327         * sure the bits you set per peripheral channel are
2328         * cleared in the default config from the platform.
2329         */
2330        ctrl_chained |= cohc->ctrl;
2331        ctrl_last |= cohc->ctrl;
2332        ctrl |= cohc->ctrl;
2333
2334        if (direction == DMA_MEM_TO_DEV) {
2335                u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE |
2336                        COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE;
2337
2338                config |= COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY;
2339                ctrl_chained |= tx_flags;
2340                ctrl_last |= tx_flags;
2341                ctrl |= tx_flags;
2342        } else if (direction == DMA_DEV_TO_MEM) {
2343                u32 rx_flags = COH901318_CX_CTRL_PRDD_DEST |
2344                        COH901318_CX_CTRL_DST_ADDR_INC_ENABLE;
2345
2346                config |= COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY;
2347                ctrl_chained |= rx_flags;
2348                ctrl_last |= rx_flags;
2349                ctrl |= rx_flags;
2350        } else
2351                goto err_direction;
2352
2353        /* The dma only supports transmitting packages up to
2354         * MAX_DMA_PACKET_SIZE. Calculate to total number of
2355         * dma elemts required to send the entire sg list
2356         */
2357        for_each_sg(sgl, sg, sg_len, i) {
2358                unsigned int factor;
2359                size = sg_dma_len(sg);
2360
2361                if (size <= MAX_DMA_PACKET_SIZE) {
2362                        len++;
2363                        continue;
2364                }
2365
2366                factor = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2367                if ((factor << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2368                        factor++;
2369
2370                len += factor;
2371        }
2372
2373        pr_debug("Allocate %d lli:s for this transfer\n", len);
2374        lli = coh901318_lli_alloc(&cohc->base->pool, len);
2375
2376        if (lli == NULL)
2377                goto err_dma_alloc;
2378
2379        /* initiate allocated lli list */
2380        ret = coh901318_lli_fill_sg(&cohc->base->pool, lli, sgl, sg_len,
2381                                    cohc->addr,
2382                                    ctrl_chained,
2383                                    ctrl,
2384                                    ctrl_last,
2385                                    direction, COH901318_CX_CTRL_TC_IRQ_ENABLE);
2386        if (ret)
2387                goto err_lli_fill;
2388
2389
2390        COH_DBG(coh901318_list_print(cohc, lli));
2391
2392        /* Pick a descriptor to handle this transfer */
2393        cohd = coh901318_desc_get(cohc);
2394        cohd->head_config = config;
2395        /*
2396         * Set the default head ctrl for the channel to the one from the
2397         * lli, things may have changed due to odd buffer alignment
2398         * etc.
2399         */
2400        cohd->head_ctrl = lli->control;
2401        cohd->dir = direction;
2402        cohd->flags = flags;
2403        cohd->desc.tx_submit = coh901318_tx_submit;
2404        cohd->lli = lli;
2405
2406        spin_unlock_irqrestore(&cohc->lock, flg);
2407
2408        return &cohd->desc;
2409 err_lli_fill:
2410 err_dma_alloc:
2411 err_direction:
2412        spin_unlock_irqrestore(&cohc->lock, flg);
2413 out:
2414        return NULL;
2415}
2416
2417static enum dma_status
2418coh901318_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2419                 struct dma_tx_state *txstate)
2420{
2421        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2422        enum dma_status ret;
2423
2424        ret = dma_cookie_status(chan, cookie, txstate);
2425        if (ret == DMA_COMPLETE)
2426                return ret;
2427
2428        dma_set_residue(txstate, coh901318_get_bytes_left(chan));
2429
2430        if (ret == DMA_IN_PROGRESS && cohc->stopped)
2431                ret = DMA_PAUSED;
2432
2433        return ret;
2434}
2435
2436static void
2437coh901318_issue_pending(struct dma_chan *chan)
2438{
2439        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2440        unsigned long flags;
2441
2442        spin_lock_irqsave(&cohc->lock, flags);
2443
2444        /*
2445         * Busy means that pending jobs are already being processed,
2446         * and then there is no point in starting the queue: the
2447         * terminal count interrupt on the channel will take the next
2448         * job on the queue and execute it anyway.
2449         */
2450        if (!cohc->busy)
2451                coh901318_queue_start(cohc);
2452
2453        spin_unlock_irqrestore(&cohc->lock, flags);
2454}
2455
2456/*
2457 * Here we wrap in the runtime dma control interface
2458 */
2459struct burst_table {
2460        int burst_8bit;
2461        int burst_16bit;
2462        int burst_32bit;
2463        u32 reg;
2464};
2465
2466static const struct burst_table burst_sizes[] = {
2467        {
2468                .burst_8bit = 64,
2469                .burst_16bit = 32,
2470                .burst_32bit = 16,
2471                .reg = COH901318_CX_CTRL_BURST_COUNT_64_BYTES,
2472        },
2473        {
2474                .burst_8bit = 48,
2475                .burst_16bit = 24,
2476                .burst_32bit = 12,
2477                .reg = COH901318_CX_CTRL_BURST_COUNT_48_BYTES,
2478        },
2479        {
2480                .burst_8bit = 32,
2481                .burst_16bit = 16,
2482                .burst_32bit = 8,
2483                .reg = COH901318_CX_CTRL_BURST_COUNT_32_BYTES,
2484        },
2485        {
2486                .burst_8bit = 16,
2487                .burst_16bit = 8,
2488                .burst_32bit = 4,
2489                .reg = COH901318_CX_CTRL_BURST_COUNT_16_BYTES,
2490        },
2491        {
2492                .burst_8bit = 8,
2493                .burst_16bit = 4,
2494                .burst_32bit = 2,
2495                .reg = COH901318_CX_CTRL_BURST_COUNT_8_BYTES,
2496        },
2497        {
2498                .burst_8bit = 4,
2499                .burst_16bit = 2,
2500                .burst_32bit = 1,
2501                .reg = COH901318_CX_CTRL_BURST_COUNT_4_BYTES,
2502        },
2503        {
2504                .burst_8bit = 2,
2505                .burst_16bit = 1,
2506                .burst_32bit = 0,
2507                .reg = COH901318_CX_CTRL_BURST_COUNT_2_BYTES,
2508        },
2509        {
2510                .burst_8bit = 1,
2511                .burst_16bit = 0,
2512                .burst_32bit = 0,
2513                .reg = COH901318_CX_CTRL_BURST_COUNT_1_BYTE,
2514        },
2515};
2516
2517static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
2518                                           struct dma_slave_config *config)
2519{
2520        struct coh901318_chan *cohc = to_coh901318_chan(chan);
2521        dma_addr_t addr;
2522        enum dma_slave_buswidth addr_width;
2523        u32 maxburst;
2524        u32 ctrl = 0;
2525        int i = 0;
2526
2527        /* We only support mem to per or per to mem transfers */
2528        if (config->direction == DMA_DEV_TO_MEM) {
2529                addr = config->src_addr;
2530                addr_width = config->src_addr_width;
2531                maxburst = config->src_maxburst;
2532        } else if (config->direction == DMA_MEM_TO_DEV) {
2533                addr = config->dst_addr;
2534                addr_width = config->dst_addr_width;
2535                maxburst = config->dst_maxburst;
2536        } else {
2537                dev_err(COHC_2_DEV(cohc), "illegal channel mode\n");
2538                return -EINVAL;
2539        }
2540
2541        dev_dbg(COHC_2_DEV(cohc), "configure channel for %d byte transfers\n",
2542                addr_width);
2543        switch (addr_width)  {
2544        case DMA_SLAVE_BUSWIDTH_1_BYTE:
2545                ctrl |=
2546                        COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS |
2547                        COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS;
2548
2549                while (i < ARRAY_SIZE(burst_sizes)) {
2550                        if (burst_sizes[i].burst_8bit <= maxburst)
2551                                break;
2552                        i++;
2553                }
2554
2555                break;
2556        case DMA_SLAVE_BUSWIDTH_2_BYTES:
2557                ctrl |=
2558                        COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS |
2559                        COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS;
2560
2561                while (i < ARRAY_SIZE(burst_sizes)) {
2562                        if (burst_sizes[i].burst_16bit <= maxburst)
2563                                break;
2564                        i++;
2565                }
2566
2567                break;
2568        case DMA_SLAVE_BUSWIDTH_4_BYTES:
2569                /* Direction doesn't matter here, it's 32/32 bits */
2570                ctrl |=
2571                        COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
2572                        COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS;
2573
2574                while (i < ARRAY_SIZE(burst_sizes)) {
2575                        if (burst_sizes[i].burst_32bit <= maxburst)
2576                                break;
2577                        i++;
2578                }
2579
2580                break;
2581        default:
2582                dev_err(COHC_2_DEV(cohc),
2583                        "bad runtimeconfig: alien address width\n");
2584                return -EINVAL;
2585        }
2586
2587        ctrl |= burst_sizes[i].reg;
2588        dev_dbg(COHC_2_DEV(cohc),
2589                "selected burst size %d bytes for address width %d bytes, maxburst %d\n",
2590                burst_sizes[i].burst_8bit, addr_width, maxburst);
2591
2592        cohc->addr = addr;
2593        cohc->ctrl = ctrl;
2594
2595        return 0;
2596}
2597
2598static void coh901318_base_init(struct dma_device *dma, const int *pick_chans,
2599                                struct coh901318_base *base)
2600{
2601        int chans_i;
2602        int i = 0;
2603        struct coh901318_chan *cohc;
2604
2605        INIT_LIST_HEAD(&dma->channels);
2606
2607        for (chans_i = 0; pick_chans[chans_i] != -1; chans_i += 2) {
2608                for (i = pick_chans[chans_i]; i <= pick_chans[chans_i+1]; i++) {
2609                        cohc = &base->chans[i];
2610
2611                        cohc->base = base;
2612                        cohc->chan.device = dma;
2613                        cohc->id = i;
2614
2615                        /* TODO: do we really need this lock if only one
2616                         * client is connected to each channel?
2617                         */
2618
2619                        spin_lock_init(&cohc->lock);
2620
2621                        cohc->nbr_active_done = 0;
2622                        cohc->busy = 0;
2623                        INIT_LIST_HEAD(&cohc->free);
2624                        INIT_LIST_HEAD(&cohc->active);
2625                        INIT_LIST_HEAD(&cohc->queue);
2626
2627                        tasklet_init(&cohc->tasklet, dma_tasklet,
2628                                     (unsigned long) cohc);
2629
2630                        list_add_tail(&cohc->chan.device_node,
2631                                      &dma->channels);
2632                }
2633        }
2634}
2635
2636static int __init coh901318_probe(struct platform_device *pdev)
2637{
2638        int err = 0;
2639        struct coh901318_base *base;
2640        int irq;
2641        struct resource *io;
2642
2643        io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2644        if (!io)
2645                return -ENODEV;
2646
2647        /* Map DMA controller registers to virtual memory */
2648        if (devm_request_mem_region(&pdev->dev,
2649                                    io->start,
2650                                    resource_size(io),
2651                                    pdev->dev.driver->name) == NULL)
2652                return -ENOMEM;
2653
2654        base = devm_kzalloc(&pdev->dev,
2655                            ALIGN(sizeof(struct coh901318_base), 4) +
2656                            U300_DMA_CHANNELS *
2657                            sizeof(struct coh901318_chan),
2658                            GFP_KERNEL);
2659        if (!base)
2660                return -ENOMEM;
2661
2662        base->chans = ((void *)base) + ALIGN(sizeof(struct coh901318_base), 4);
2663
2664        base->virtbase = devm_ioremap(&pdev->dev, io->start, resource_size(io));
2665        if (!base->virtbase)
2666                return -ENOMEM;
2667
2668        base->dev = &pdev->dev;
2669        spin_lock_init(&base->pm.lock);
2670        base->pm.started_channels = 0;
2671
2672        COH901318_DEBUGFS_ASSIGN(debugfs_dma_base, base);
2673
2674        irq = platform_get_irq(pdev, 0);
2675        if (irq < 0)
2676                return irq;
2677
2678        err = devm_request_irq(&pdev->dev, irq, dma_irq_handler, 0,
2679                               "coh901318", base);
2680        if (err)
2681                return err;
2682
2683        err = coh901318_pool_create(&base->pool, &pdev->dev,
2684                                    sizeof(struct coh901318_lli),
2685                                    32);
2686        if (err)
2687                return err;
2688
2689        /* init channels for device transfers */
2690        coh901318_base_init(&base->dma_slave, dma_slave_channels,
2691                            base);
2692
2693        dma_cap_zero(base->dma_slave.cap_mask);
2694        dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2695
2696        base->dma_slave.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2697        base->dma_slave.device_free_chan_resources = coh901318_free_chan_resources;
2698        base->dma_slave.device_prep_slave_sg = coh901318_prep_slave_sg;
2699        base->dma_slave.device_tx_status = coh901318_tx_status;
2700        base->dma_slave.device_issue_pending = coh901318_issue_pending;
2701        base->dma_slave.device_config = coh901318_dma_set_runtimeconfig;
2702        base->dma_slave.device_pause = coh901318_pause;
2703        base->dma_slave.device_resume = coh901318_resume;
2704        base->dma_slave.device_terminate_all = coh901318_terminate_all;
2705        base->dma_slave.dev = &pdev->dev;
2706
2707        err = dma_async_device_register(&base->dma_slave);
2708
2709        if (err)
2710                goto err_register_slave;
2711
2712        /* init channels for memcpy */
2713        coh901318_base_init(&base->dma_memcpy, dma_memcpy_channels,
2714                            base);
2715
2716        dma_cap_zero(base->dma_memcpy.cap_mask);
2717        dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2718
2719        base->dma_memcpy.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2720        base->dma_memcpy.device_free_chan_resources = coh901318_free_chan_resources;
2721        base->dma_memcpy.device_prep_dma_memcpy = coh901318_prep_memcpy;
2722        base->dma_memcpy.device_tx_status = coh901318_tx_status;
2723        base->dma_memcpy.device_issue_pending = coh901318_issue_pending;
2724        base->dma_memcpy.device_config = coh901318_dma_set_runtimeconfig;
2725        base->dma_memcpy.device_pause = coh901318_pause;
2726        base->dma_memcpy.device_resume = coh901318_resume;
2727        base->dma_memcpy.device_terminate_all = coh901318_terminate_all;
2728        base->dma_memcpy.dev = &pdev->dev;
2729        /*
2730         * This controller can only access address at even 32bit boundaries,
2731         * i.e. 2^2
2732         */
2733        base->dma_memcpy.copy_align = DMAENGINE_ALIGN_4_BYTES;
2734        err = dma_async_device_register(&base->dma_memcpy);
2735
2736        if (err)
2737                goto err_register_memcpy;
2738
2739        err = of_dma_controller_register(pdev->dev.of_node, coh901318_xlate,
2740                                         base);
2741        if (err)
2742                goto err_register_of_dma;
2743
2744        platform_set_drvdata(pdev, base);
2745        dev_info(&pdev->dev, "Initialized COH901318 DMA on virtual base 0x%08x\n",
2746                (u32) base->virtbase);
2747
2748        return err;
2749
2750 err_register_of_dma:
2751        dma_async_device_unregister(&base->dma_memcpy);
2752 err_register_memcpy:
2753        dma_async_device_unregister(&base->dma_slave);
2754 err_register_slave:
2755        coh901318_pool_destroy(&base->pool);
2756        return err;
2757}
2758
2759static int coh901318_remove(struct platform_device *pdev)
2760{
2761        struct coh901318_base *base = platform_get_drvdata(pdev);
2762
2763        of_dma_controller_free(pdev->dev.of_node);
2764        dma_async_device_unregister(&base->dma_memcpy);
2765        dma_async_device_unregister(&base->dma_slave);
2766        coh901318_pool_destroy(&base->pool);
2767        return 0;
2768}
2769
2770static const struct of_device_id coh901318_dt_match[] = {
2771        { .compatible = "stericsson,coh901318" },
2772        {},
2773};
2774
2775static struct platform_driver coh901318_driver = {
2776        .remove = coh901318_remove,
2777        .driver = {
2778                .name   = "coh901318",
2779                .of_match_table = coh901318_dt_match,
2780        },
2781};
2782
2783int __init coh901318_init(void)
2784{
2785        return platform_driver_probe(&coh901318_driver, coh901318_probe);
2786}
2787subsys_initcall(coh901318_init);
2788
2789void __exit coh901318_exit(void)
2790{
2791        platform_driver_unregister(&coh901318_driver);
2792}
2793module_exit(coh901318_exit);
2794
2795MODULE_LICENSE("GPL");
2796MODULE_AUTHOR("Per Friden");
2797