linux/drivers/hwmon/w83627hf.c
<<
>>
Prefs
   1/*
   2 * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
   3 *              monitoring
   4 * Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
   5 *                            Philip Edelbrock <phil@netroedge.com>,
   6 *                            and Mark Studebaker <mdsxyz123@yahoo.com>
   7 * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
   8 * Copyright (c) 2007 - 1012  Jean Delvare <jdelvare@suse.de>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or
  13 * (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License
  21 * along with this program; if not, write to the Free Software
  22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23 */
  24
  25/*
  26 * Supports following chips:
  27 *
  28 * Chip         #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  29 * w83627hf     9       3       2       3       0x20    0x5ca3  no      yes(LPC)
  30 * w83627thf    7       3       3       3       0x90    0x5ca3  no      yes(LPC)
  31 * w83637hf     7       3       3       3       0x80    0x5ca3  no      yes(LPC)
  32 * w83687thf    7       3       3       3       0x90    0x5ca3  no      yes(LPC)
  33 * w83697hf     8       2       2       2       0x60    0x5ca3  no      yes(LPC)
  34 *
  35 * For other winbond chips, and for i2c support in the above chips,
  36 * use w83781d.c.
  37 *
  38 * Note: automatic ("cruise") fan control for 697, 637 & 627thf not
  39 * supported yet.
  40 */
  41
  42#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  43
  44#include <linux/module.h>
  45#include <linux/init.h>
  46#include <linux/slab.h>
  47#include <linux/jiffies.h>
  48#include <linux/platform_device.h>
  49#include <linux/hwmon.h>
  50#include <linux/hwmon-sysfs.h>
  51#include <linux/hwmon-vid.h>
  52#include <linux/err.h>
  53#include <linux/mutex.h>
  54#include <linux/ioport.h>
  55#include <linux/acpi.h>
  56#include <linux/io.h>
  57#include "lm75.h"
  58
  59static struct platform_device *pdev;
  60
  61#define DRVNAME "w83627hf"
  62enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
  63
  64struct w83627hf_sio_data {
  65        enum chips type;
  66        int sioaddr;
  67};
  68
  69static u8 force_i2c = 0x1f;
  70module_param(force_i2c, byte, 0);
  71MODULE_PARM_DESC(force_i2c,
  72                 "Initialize the i2c address of the sensors");
  73
  74static bool init = 1;
  75module_param(init, bool, 0);
  76MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  77
  78static unsigned short force_id;
  79module_param(force_id, ushort, 0);
  80MODULE_PARM_DESC(force_id, "Override the detected device ID");
  81
  82/* modified from kernel/include/traps.c */
  83#define DEV                     0x07 /* Register: Logical device select */
  84
  85/* logical device numbers for superio_select (below) */
  86#define W83627HF_LD_FDC         0x00
  87#define W83627HF_LD_PRT         0x01
  88#define W83627HF_LD_UART1       0x02
  89#define W83627HF_LD_UART2       0x03
  90#define W83627HF_LD_KBC         0x05
  91#define W83627HF_LD_CIR         0x06 /* w83627hf only */
  92#define W83627HF_LD_GAME        0x07
  93#define W83627HF_LD_MIDI        0x07
  94#define W83627HF_LD_GPIO1       0x07
  95#define W83627HF_LD_GPIO5       0x07 /* w83627thf only */
  96#define W83627HF_LD_GPIO2       0x08
  97#define W83627HF_LD_GPIO3       0x09
  98#define W83627HF_LD_GPIO4       0x09 /* w83627thf only */
  99#define W83627HF_LD_ACPI        0x0a
 100#define W83627HF_LD_HWM         0x0b
 101
 102#define DEVID                   0x20 /* Register: Device ID */
 103
 104#define W83627THF_GPIO5_EN      0x30 /* w83627thf only */
 105#define W83627THF_GPIO5_IOSR    0xf3 /* w83627thf only */
 106#define W83627THF_GPIO5_DR      0xf4 /* w83627thf only */
 107
 108#define W83687THF_VID_EN        0x29 /* w83687thf only */
 109#define W83687THF_VID_CFG       0xF0 /* w83687thf only */
 110#define W83687THF_VID_DATA      0xF1 /* w83687thf only */
 111
 112static inline void
 113superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
 114{
 115        outb(reg, sio->sioaddr);
 116        outb(val, sio->sioaddr + 1);
 117}
 118
 119static inline int
 120superio_inb(struct w83627hf_sio_data *sio, int reg)
 121{
 122        outb(reg, sio->sioaddr);
 123        return inb(sio->sioaddr + 1);
 124}
 125
 126static inline void
 127superio_select(struct w83627hf_sio_data *sio, int ld)
 128{
 129        outb(DEV, sio->sioaddr);
 130        outb(ld,  sio->sioaddr + 1);
 131}
 132
 133static inline void
 134superio_enter(struct w83627hf_sio_data *sio)
 135{
 136        outb(0x87, sio->sioaddr);
 137        outb(0x87, sio->sioaddr);
 138}
 139
 140static inline void
 141superio_exit(struct w83627hf_sio_data *sio)
 142{
 143        outb(0xAA, sio->sioaddr);
 144}
 145
 146#define W627_DEVID 0x52
 147#define W627THF_DEVID 0x82
 148#define W697_DEVID 0x60
 149#define W637_DEVID 0x70
 150#define W687THF_DEVID 0x85
 151#define WINB_ACT_REG 0x30
 152#define WINB_BASE_REG 0x60
 153/* Constants specified below */
 154
 155/* Alignment of the base address */
 156#define WINB_ALIGNMENT          ~7
 157
 158/* Offset & size of I/O region we are interested in */
 159#define WINB_REGION_OFFSET      5
 160#define WINB_REGION_SIZE        2
 161
 162/* Where are the sensors address/data registers relative to the region offset */
 163#define W83781D_ADDR_REG_OFFSET 0
 164#define W83781D_DATA_REG_OFFSET 1
 165
 166/* The W83781D registers */
 167/* The W83782D registers for nr=7,8 are in bank 5 */
 168#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
 169                                           (0x554 + (((nr) - 7) * 2)))
 170#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
 171                                           (0x555 + (((nr) - 7) * 2)))
 172#define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
 173                                           (0x550 + (nr) - 7))
 174
 175/* nr:0-2 for fans:1-3 */
 176#define W83627HF_REG_FAN_MIN(nr)        (0x3b + (nr))
 177#define W83627HF_REG_FAN(nr)            (0x28 + (nr))
 178
 179#define W83627HF_REG_TEMP2_CONFIG 0x152
 180#define W83627HF_REG_TEMP3_CONFIG 0x252
 181/* these are zero-based, unlike config constants above */
 182static const u16 w83627hf_reg_temp[]            = { 0x27, 0x150, 0x250 };
 183static const u16 w83627hf_reg_temp_hyst[]       = { 0x3A, 0x153, 0x253 };
 184static const u16 w83627hf_reg_temp_over[]       = { 0x39, 0x155, 0x255 };
 185
 186#define W83781D_REG_BANK 0x4E
 187
 188#define W83781D_REG_CONFIG 0x40
 189#define W83781D_REG_ALARM1 0x459
 190#define W83781D_REG_ALARM2 0x45A
 191#define W83781D_REG_ALARM3 0x45B
 192
 193#define W83781D_REG_BEEP_CONFIG 0x4D
 194#define W83781D_REG_BEEP_INTS1 0x56
 195#define W83781D_REG_BEEP_INTS2 0x57
 196#define W83781D_REG_BEEP_INTS3 0x453
 197
 198#define W83781D_REG_VID_FANDIV 0x47
 199
 200#define W83781D_REG_CHIPID 0x49
 201#define W83781D_REG_WCHIPID 0x58
 202#define W83781D_REG_CHIPMAN 0x4F
 203#define W83781D_REG_PIN 0x4B
 204
 205#define W83781D_REG_VBAT 0x5D
 206
 207#define W83627HF_REG_PWM1 0x5A
 208#define W83627HF_REG_PWM2 0x5B
 209
 210static const u8 W83627THF_REG_PWM_ENABLE[] = {
 211        0x04,           /* FAN 1 mode */
 212        0x04,           /* FAN 2 mode */
 213        0x12,           /* FAN AUX mode */
 214};
 215static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
 216
 217#define W83627THF_REG_PWM1              0x01    /* 697HF/637HF/687THF too */
 218#define W83627THF_REG_PWM2              0x03    /* 697HF/637HF/687THF too */
 219#define W83627THF_REG_PWM3              0x11    /* 637HF/687THF too */
 220
 221#define W83627THF_REG_VRM_OVT_CFG       0x18    /* 637HF/687THF too */
 222
 223static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
 224static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
 225                             W83627THF_REG_PWM3 };
 226#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
 227                                    regpwm_627hf[nr] : regpwm[nr])
 228
 229#define W83627HF_REG_PWM_FREQ           0x5C    /* Only for the 627HF */
 230
 231#define W83637HF_REG_PWM_FREQ1          0x00    /* 697HF/687THF too */
 232#define W83637HF_REG_PWM_FREQ2          0x02    /* 697HF/687THF too */
 233#define W83637HF_REG_PWM_FREQ3          0x10    /* 687THF too */
 234
 235static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
 236                                        W83637HF_REG_PWM_FREQ2,
 237                                        W83637HF_REG_PWM_FREQ3 };
 238
 239#define W83627HF_BASE_PWM_FREQ  46870
 240
 241#define W83781D_REG_I2C_ADDR 0x48
 242#define W83781D_REG_I2C_SUBADDR 0x4A
 243
 244/* Sensor selection */
 245#define W83781D_REG_SCFG1 0x5D
 246static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 247#define W83781D_REG_SCFG2 0x59
 248static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 249#define W83781D_DEFAULT_BETA 3435
 250
 251/*
 252 * Conversions. Limit checking is only done on the TO_REG
 253 * variants. Note that you should be a bit careful with which arguments
 254 * these macros are called: arguments may be evaluated more than once.
 255 * Fixing this is just not worth it.
 256 */
 257#define IN_TO_REG(val)  (clamp_val((((val) + 8) / 16), 0, 255))
 258#define IN_FROM_REG(val) ((val) * 16)
 259
 260static inline u8 FAN_TO_REG(long rpm, int div)
 261{
 262        if (rpm == 0)
 263                return 255;
 264        rpm = clamp_val(rpm, 1, 1000000);
 265        return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 266}
 267
 268#define TEMP_MIN (-128000)
 269#define TEMP_MAX ( 127000)
 270
 271/*
 272 * TEMP: 0.001C/bit (-128C to +127C)
 273 * REG: 1C/bit, two's complement
 274 */
 275static u8 TEMP_TO_REG(long temp)
 276{
 277        int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX);
 278        ntemp += (ntemp < 0 ? -500 : 500);
 279        return (u8)(ntemp / 1000);
 280}
 281
 282static int TEMP_FROM_REG(u8 reg)
 283{
 284        return (s8)reg * 1000;
 285}
 286
 287#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
 288
 289#define PWM_TO_REG(val) (clamp_val((val), 0, 255))
 290
 291static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
 292{
 293        unsigned long freq;
 294        freq = W83627HF_BASE_PWM_FREQ >> reg;
 295        return freq;
 296}
 297static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
 298{
 299        u8 i;
 300        /*
 301         * Only 5 dividers (1 2 4 8 16)
 302         * Search for the nearest available frequency
 303         */
 304        for (i = 0; i < 4; i++) {
 305                if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
 306                            (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
 307                        break;
 308        }
 309        return i;
 310}
 311
 312static inline unsigned long pwm_freq_from_reg(u8 reg)
 313{
 314        /* Clock bit 8 -> 180 kHz or 24 MHz */
 315        unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
 316
 317        reg &= 0x7f;
 318        /* This should not happen but anyway... */
 319        if (reg == 0)
 320                reg++;
 321        return clock / (reg << 8);
 322}
 323static inline u8 pwm_freq_to_reg(unsigned long val)
 324{
 325        /* Minimum divider value is 0x01 and maximum is 0x7F */
 326        if (val >= 93750)       /* The highest we can do */
 327                return 0x01;
 328        if (val >= 720) /* Use 24 MHz clock */
 329                return 24000000UL / (val << 8);
 330        if (val < 6)            /* The lowest we can do */
 331                return 0xFF;
 332        else                    /* Use 180 kHz clock */
 333                return 0x80 | (180000UL / (val << 8));
 334}
 335
 336#define BEEP_MASK_FROM_REG(val)         ((val) & 0xff7fff)
 337#define BEEP_MASK_TO_REG(val)           ((val) & 0xff7fff)
 338
 339#define DIV_FROM_REG(val) (1 << (val))
 340
 341static inline u8 DIV_TO_REG(long val)
 342{
 343        int i;
 344        val = clamp_val(val, 1, 128) >> 1;
 345        for (i = 0; i < 7; i++) {
 346                if (val == 0)
 347                        break;
 348                val >>= 1;
 349        }
 350        return (u8)i;
 351}
 352
 353/*
 354 * For each registered chip, we need to keep some data in memory.
 355 * The structure is dynamically allocated.
 356 */
 357struct w83627hf_data {
 358        unsigned short addr;
 359        const char *name;
 360        struct device *hwmon_dev;
 361        struct mutex lock;
 362        enum chips type;
 363
 364        struct mutex update_lock;
 365        char valid;             /* !=0 if following fields are valid */
 366        unsigned long last_updated;     /* In jiffies */
 367
 368        u8 in[9];               /* Register value */
 369        u8 in_max[9];           /* Register value */
 370        u8 in_min[9];           /* Register value */
 371        u8 fan[3];              /* Register value */
 372        u8 fan_min[3];          /* Register value */
 373        u16 temp[3];            /* Register value */
 374        u16 temp_max[3];        /* Register value */
 375        u16 temp_max_hyst[3];   /* Register value */
 376        u8 fan_div[3];          /* Register encoding, shifted right */
 377        u8 vid;                 /* Register encoding, combined */
 378        u32 alarms;             /* Register encoding, combined */
 379        u32 beep_mask;          /* Register encoding, combined */
 380        u8 pwm[3];              /* Register value */
 381        u8 pwm_enable[3];       /* 1 = manual
 382                                 * 2 = thermal cruise (also called SmartFan I)
 383                                 * 3 = fan speed cruise
 384                                 */
 385        u8 pwm_freq[3];         /* Register value */
 386        u16 sens[3];            /* 1 = pentium diode; 2 = 3904 diode;
 387                                 * 4 = thermistor
 388                                 */
 389        u8 vrm;
 390        u8 vrm_ovt;             /* Register value, 627THF/637HF/687THF only */
 391
 392#ifdef CONFIG_PM
 393        /* Remember extra register values over suspend/resume */
 394        u8 scfg1;
 395        u8 scfg2;
 396#endif
 397};
 398
 399
 400static int w83627hf_probe(struct platform_device *pdev);
 401static int w83627hf_remove(struct platform_device *pdev);
 402
 403static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
 404static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
 405static void w83627hf_update_fan_div(struct w83627hf_data *data);
 406static struct w83627hf_data *w83627hf_update_device(struct device *dev);
 407static void w83627hf_init_device(struct platform_device *pdev);
 408
 409#ifdef CONFIG_PM
 410static int w83627hf_suspend(struct device *dev)
 411{
 412        struct w83627hf_data *data = w83627hf_update_device(dev);
 413
 414        mutex_lock(&data->update_lock);
 415        data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1);
 416        data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2);
 417        mutex_unlock(&data->update_lock);
 418
 419        return 0;
 420}
 421
 422static int w83627hf_resume(struct device *dev)
 423{
 424        struct w83627hf_data *data = dev_get_drvdata(dev);
 425        int i, num_temps = (data->type == w83697hf) ? 2 : 3;
 426
 427        /* Restore limits */
 428        mutex_lock(&data->update_lock);
 429        for (i = 0; i <= 8; i++) {
 430                /* skip missing sensors */
 431                if (((data->type == w83697hf) && (i == 1)) ||
 432                    ((data->type != w83627hf && data->type != w83697hf)
 433                    && (i == 5 || i == 6)))
 434                        continue;
 435                w83627hf_write_value(data, W83781D_REG_IN_MAX(i),
 436                                     data->in_max[i]);
 437                w83627hf_write_value(data, W83781D_REG_IN_MIN(i),
 438                                     data->in_min[i]);
 439        }
 440        for (i = 0; i <= 2; i++)
 441                w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i),
 442                                     data->fan_min[i]);
 443        for (i = 0; i < num_temps; i++) {
 444                w83627hf_write_value(data, w83627hf_reg_temp_over[i],
 445                                     data->temp_max[i]);
 446                w83627hf_write_value(data, w83627hf_reg_temp_hyst[i],
 447                                     data->temp_max_hyst[i]);
 448        }
 449
 450        /* Fixup BIOS bugs */
 451        if (data->type == w83627thf || data->type == w83637hf ||
 452            data->type == w83687thf)
 453                w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG,
 454                                     data->vrm_ovt);
 455        w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1);
 456        w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2);
 457
 458        /* Force re-reading all values */
 459        data->valid = 0;
 460        mutex_unlock(&data->update_lock);
 461
 462        return 0;
 463}
 464
 465static const struct dev_pm_ops w83627hf_dev_pm_ops = {
 466        .suspend = w83627hf_suspend,
 467        .resume = w83627hf_resume,
 468};
 469
 470#define W83627HF_DEV_PM_OPS     (&w83627hf_dev_pm_ops)
 471#else
 472#define W83627HF_DEV_PM_OPS     NULL
 473#endif /* CONFIG_PM */
 474
 475static struct platform_driver w83627hf_driver = {
 476        .driver = {
 477                .name   = DRVNAME,
 478                .pm     = W83627HF_DEV_PM_OPS,
 479        },
 480        .probe          = w83627hf_probe,
 481        .remove         = w83627hf_remove,
 482};
 483
 484static ssize_t
 485show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
 486{
 487        int nr = to_sensor_dev_attr(devattr)->index;
 488        struct w83627hf_data *data = w83627hf_update_device(dev);
 489        return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
 490}
 491static ssize_t
 492show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
 493{
 494        int nr = to_sensor_dev_attr(devattr)->index;
 495        struct w83627hf_data *data = w83627hf_update_device(dev);
 496        return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
 497}
 498static ssize_t
 499show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
 500{
 501        int nr = to_sensor_dev_attr(devattr)->index;
 502        struct w83627hf_data *data = w83627hf_update_device(dev);
 503        return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
 504}
 505static ssize_t
 506store_in_min(struct device *dev, struct device_attribute *devattr,
 507             const char *buf, size_t count)
 508{
 509        int nr = to_sensor_dev_attr(devattr)->index;
 510        struct w83627hf_data *data = dev_get_drvdata(dev);
 511        long val;
 512        int err;
 513
 514        err = kstrtol(buf, 10, &val);
 515        if (err)
 516                return err;
 517
 518        mutex_lock(&data->update_lock);
 519        data->in_min[nr] = IN_TO_REG(val);
 520        w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
 521        mutex_unlock(&data->update_lock);
 522        return count;
 523}
 524static ssize_t
 525store_in_max(struct device *dev, struct device_attribute *devattr,
 526             const char *buf, size_t count)
 527{
 528        int nr = to_sensor_dev_attr(devattr)->index;
 529        struct w83627hf_data *data = dev_get_drvdata(dev);
 530        long val;
 531        int err;
 532
 533        err = kstrtol(buf, 10, &val);
 534        if (err)
 535                return err;
 536
 537        mutex_lock(&data->update_lock);
 538        data->in_max[nr] = IN_TO_REG(val);
 539        w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
 540        mutex_unlock(&data->update_lock);
 541        return count;
 542}
 543#define sysfs_vin_decl(offset) \
 544static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,          \
 545                          show_in_input, NULL, offset);         \
 546static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR,    \
 547                          show_in_min, store_in_min, offset);   \
 548static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR,    \
 549                          show_in_max, store_in_max, offset);
 550
 551sysfs_vin_decl(1);
 552sysfs_vin_decl(2);
 553sysfs_vin_decl(3);
 554sysfs_vin_decl(4);
 555sysfs_vin_decl(5);
 556sysfs_vin_decl(6);
 557sysfs_vin_decl(7);
 558sysfs_vin_decl(8);
 559
 560/* use a different set of functions for in0 */
 561static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
 562{
 563        long in0;
 564
 565        if ((data->vrm_ovt & 0x01) &&
 566                (w83627thf == data->type || w83637hf == data->type
 567                 || w83687thf == data->type))
 568
 569                /* use VRM9 calculation */
 570                in0 = (long)((reg * 488 + 70000 + 50) / 100);
 571        else
 572                /* use VRM8 (standard) calculation */
 573                in0 = (long)IN_FROM_REG(reg);
 574
 575        return sprintf(buf,"%ld\n", in0);
 576}
 577
 578static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
 579{
 580        struct w83627hf_data *data = w83627hf_update_device(dev);
 581        return show_in_0(data, buf, data->in[0]);
 582}
 583
 584static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
 585{
 586        struct w83627hf_data *data = w83627hf_update_device(dev);
 587        return show_in_0(data, buf, data->in_min[0]);
 588}
 589
 590static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
 591{
 592        struct w83627hf_data *data = w83627hf_update_device(dev);
 593        return show_in_0(data, buf, data->in_max[0]);
 594}
 595
 596static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
 597        const char *buf, size_t count)
 598{
 599        struct w83627hf_data *data = dev_get_drvdata(dev);
 600        unsigned long val;
 601        int err;
 602
 603        err = kstrtoul(buf, 10, &val);
 604        if (err)
 605                return err;
 606
 607        mutex_lock(&data->update_lock);
 608        
 609        if ((data->vrm_ovt & 0x01) &&
 610                (w83627thf == data->type || w83637hf == data->type
 611                 || w83687thf == data->type))
 612
 613                /* use VRM9 calculation */
 614                data->in_min[0] =
 615                        clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
 616        else
 617                /* use VRM8 (standard) calculation */
 618                data->in_min[0] = IN_TO_REG(val);
 619
 620        w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
 621        mutex_unlock(&data->update_lock);
 622        return count;
 623}
 624
 625static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
 626        const char *buf, size_t count)
 627{
 628        struct w83627hf_data *data = dev_get_drvdata(dev);
 629        unsigned long val;
 630        int err;
 631
 632        err = kstrtoul(buf, 10, &val);
 633        if (err)
 634                return err;
 635
 636        mutex_lock(&data->update_lock);
 637
 638        if ((data->vrm_ovt & 0x01) &&
 639                (w83627thf == data->type || w83637hf == data->type
 640                 || w83687thf == data->type))
 641                
 642                /* use VRM9 calculation */
 643                data->in_max[0] =
 644                        clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
 645        else
 646                /* use VRM8 (standard) calculation */
 647                data->in_max[0] = IN_TO_REG(val);
 648
 649        w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
 650        mutex_unlock(&data->update_lock);
 651        return count;
 652}
 653
 654static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
 655static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
 656        show_regs_in_min0, store_regs_in_min0);
 657static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
 658        show_regs_in_max0, store_regs_in_max0);
 659
 660static ssize_t
 661show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
 662{
 663        int nr = to_sensor_dev_attr(devattr)->index;
 664        struct w83627hf_data *data = w83627hf_update_device(dev);
 665        return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
 666                                (long)DIV_FROM_REG(data->fan_div[nr])));
 667}
 668static ssize_t
 669show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
 670{
 671        int nr = to_sensor_dev_attr(devattr)->index;
 672        struct w83627hf_data *data = w83627hf_update_device(dev);
 673        return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
 674                                (long)DIV_FROM_REG(data->fan_div[nr])));
 675}
 676static ssize_t
 677store_fan_min(struct device *dev, struct device_attribute *devattr,
 678              const char *buf, size_t count)
 679{
 680        int nr = to_sensor_dev_attr(devattr)->index;
 681        struct w83627hf_data *data = dev_get_drvdata(dev);
 682        unsigned long val;
 683        int err;
 684
 685        err = kstrtoul(buf, 10, &val);
 686        if (err)
 687                return err;
 688
 689        mutex_lock(&data->update_lock);
 690        data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 691        w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr),
 692                             data->fan_min[nr]);
 693
 694        mutex_unlock(&data->update_lock);
 695        return count;
 696}
 697#define sysfs_fan_decl(offset)  \
 698static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,                 \
 699                          show_fan_input, NULL, offset - 1);            \
 700static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,         \
 701                          show_fan_min, store_fan_min, offset - 1);
 702
 703sysfs_fan_decl(1);
 704sysfs_fan_decl(2);
 705sysfs_fan_decl(3);
 706
 707static ssize_t
 708show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
 709{
 710        int nr = to_sensor_dev_attr(devattr)->index;
 711        struct w83627hf_data *data = w83627hf_update_device(dev);
 712
 713        u16 tmp = data->temp[nr];
 714        return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
 715                                          : (long) TEMP_FROM_REG(tmp));
 716}
 717
 718static ssize_t
 719show_temp_max(struct device *dev, struct device_attribute *devattr,
 720              char *buf)
 721{
 722        int nr = to_sensor_dev_attr(devattr)->index;
 723        struct w83627hf_data *data = w83627hf_update_device(dev);
 724
 725        u16 tmp = data->temp_max[nr];
 726        return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
 727                                          : (long) TEMP_FROM_REG(tmp));
 728}
 729
 730static ssize_t
 731show_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
 732                   char *buf)
 733{
 734        int nr = to_sensor_dev_attr(devattr)->index;
 735        struct w83627hf_data *data = w83627hf_update_device(dev);
 736
 737        u16 tmp = data->temp_max_hyst[nr];
 738        return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
 739                                          : (long) TEMP_FROM_REG(tmp));
 740}
 741
 742static ssize_t
 743store_temp_max(struct device *dev, struct device_attribute *devattr,
 744               const char *buf, size_t count)
 745{
 746        int nr = to_sensor_dev_attr(devattr)->index;
 747        struct w83627hf_data *data = dev_get_drvdata(dev);
 748        u16 tmp;
 749        long val;
 750        int err;
 751
 752        err = kstrtol(buf, 10, &val);
 753        if (err)
 754                return err;
 755
 756        tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
 757        mutex_lock(&data->update_lock);
 758        data->temp_max[nr] = tmp;
 759        w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
 760        mutex_unlock(&data->update_lock);
 761        return count;
 762}
 763
 764static ssize_t
 765store_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
 766                    const char *buf, size_t count)
 767{
 768        int nr = to_sensor_dev_attr(devattr)->index;
 769        struct w83627hf_data *data = dev_get_drvdata(dev);
 770        u16 tmp;
 771        long val;
 772        int err;
 773
 774        err = kstrtol(buf, 10, &val);
 775        if (err)
 776                return err;
 777
 778        tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
 779        mutex_lock(&data->update_lock);
 780        data->temp_max_hyst[nr] = tmp;
 781        w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
 782        mutex_unlock(&data->update_lock);
 783        return count;
 784}
 785
 786#define sysfs_temp_decl(offset) \
 787static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,                \
 788                          show_temp, NULL, offset - 1);                 \
 789static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR,          \
 790                          show_temp_max, store_temp_max, offset - 1);   \
 791static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR,     \
 792                          show_temp_max_hyst, store_temp_max_hyst, offset - 1);
 793
 794sysfs_temp_decl(1);
 795sysfs_temp_decl(2);
 796sysfs_temp_decl(3);
 797
 798static ssize_t
 799show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 800{
 801        struct w83627hf_data *data = w83627hf_update_device(dev);
 802        return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 803}
 804static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 805
 806static ssize_t
 807show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 808{
 809        struct w83627hf_data *data = dev_get_drvdata(dev);
 810        return sprintf(buf, "%ld\n", (long) data->vrm);
 811}
 812static ssize_t
 813store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 814{
 815        struct w83627hf_data *data = dev_get_drvdata(dev);
 816        unsigned long val;
 817        int err;
 818
 819        err = kstrtoul(buf, 10, &val);
 820        if (err)
 821                return err;
 822
 823        if (val > 255)
 824                return -EINVAL;
 825        data->vrm = val;
 826
 827        return count;
 828}
 829static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 830
 831static ssize_t
 832show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
 833{
 834        struct w83627hf_data *data = w83627hf_update_device(dev);
 835        return sprintf(buf, "%ld\n", (long) data->alarms);
 836}
 837static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
 838
 839static ssize_t
 840show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
 841{
 842        struct w83627hf_data *data = w83627hf_update_device(dev);
 843        int bitnr = to_sensor_dev_attr(attr)->index;
 844        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 845}
 846static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 847static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 848static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 849static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 850static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 851static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 852static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 853static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 854static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 855static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 856static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 857static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 858static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 859static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 860static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
 861
 862static ssize_t
 863show_beep_mask(struct device *dev, struct device_attribute *attr, char *buf)
 864{
 865        struct w83627hf_data *data = w83627hf_update_device(dev);
 866        return sprintf(buf, "%ld\n",
 867                      (long)BEEP_MASK_FROM_REG(data->beep_mask));
 868}
 869
 870static ssize_t
 871store_beep_mask(struct device *dev, struct device_attribute *attr,
 872                const char *buf, size_t count)
 873{
 874        struct w83627hf_data *data = dev_get_drvdata(dev);
 875        unsigned long val;
 876        int err;
 877
 878        err = kstrtoul(buf, 10, &val);
 879        if (err)
 880                return err;
 881
 882        mutex_lock(&data->update_lock);
 883
 884        /* preserve beep enable */
 885        data->beep_mask = (data->beep_mask & 0x8000)
 886                        | BEEP_MASK_TO_REG(val);
 887        w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
 888                            data->beep_mask & 0xff);
 889        w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
 890                            ((data->beep_mask) >> 16) & 0xff);
 891        w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
 892                            (data->beep_mask >> 8) & 0xff);
 893
 894        mutex_unlock(&data->update_lock);
 895        return count;
 896}
 897
 898static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 899                   show_beep_mask, store_beep_mask);
 900
 901static ssize_t
 902show_beep(struct device *dev, struct device_attribute *attr, char *buf)
 903{
 904        struct w83627hf_data *data = w83627hf_update_device(dev);
 905        int bitnr = to_sensor_dev_attr(attr)->index;
 906        return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 907}
 908
 909static ssize_t
 910store_beep(struct device *dev, struct device_attribute *attr,
 911                const char *buf, size_t count)
 912{
 913        struct w83627hf_data *data = dev_get_drvdata(dev);
 914        int bitnr = to_sensor_dev_attr(attr)->index;
 915        u8 reg;
 916        unsigned long bit;
 917        int err;
 918
 919        err = kstrtoul(buf, 10, &bit);
 920        if (err)
 921                return err;
 922
 923        if (bit & ~1)
 924                return -EINVAL;
 925
 926        mutex_lock(&data->update_lock);
 927        if (bit)
 928                data->beep_mask |= (1 << bitnr);
 929        else
 930                data->beep_mask &= ~(1 << bitnr);
 931
 932        if (bitnr < 8) {
 933                reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1);
 934                if (bit)
 935                        reg |= (1 << bitnr);
 936                else
 937                        reg &= ~(1 << bitnr);
 938                w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 939        } else if (bitnr < 16) {
 940                reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
 941                if (bit)
 942                        reg |= (1 << (bitnr - 8));
 943                else
 944                        reg &= ~(1 << (bitnr - 8));
 945                w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 946        } else {
 947                reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3);
 948                if (bit)
 949                        reg |= (1 << (bitnr - 16));
 950                else
 951                        reg &= ~(1 << (bitnr - 16));
 952                w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 953        }
 954        mutex_unlock(&data->update_lock);
 955
 956        return count;
 957}
 958
 959static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 960                        show_beep, store_beep, 0);
 961static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 962                        show_beep, store_beep, 1);
 963static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 964                        show_beep, store_beep, 2);
 965static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 966                        show_beep, store_beep, 3);
 967static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 968                        show_beep, store_beep, 8);
 969static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 970                        show_beep, store_beep, 9);
 971static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 972                        show_beep, store_beep, 10);
 973static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 974                        show_beep, store_beep, 16);
 975static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 976                        show_beep, store_beep, 17);
 977static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 978                        show_beep, store_beep, 6);
 979static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 980                        show_beep, store_beep, 7);
 981static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 982                        show_beep, store_beep, 11);
 983static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 984                        show_beep, store_beep, 4);
 985static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 986                        show_beep, store_beep, 5);
 987static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR,
 988                        show_beep, store_beep, 13);
 989static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 990                        show_beep, store_beep, 15);
 991
 992static ssize_t
 993show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
 994{
 995        int nr = to_sensor_dev_attr(devattr)->index;
 996        struct w83627hf_data *data = w83627hf_update_device(dev);
 997        return sprintf(buf, "%ld\n",
 998                       (long) DIV_FROM_REG(data->fan_div[nr]));
 999}
1000/*
1001 * Note: we save and restore the fan minimum here, because its value is
1002 * determined in part by the fan divisor.  This follows the principle of
1003 * least surprise; the user doesn't expect the fan minimum to change just
1004 * because the divisor changed.
1005 */
1006static ssize_t
1007store_fan_div(struct device *dev, struct device_attribute *devattr,
1008              const char *buf, size_t count)
1009{
1010        int nr = to_sensor_dev_attr(devattr)->index;
1011        struct w83627hf_data *data = dev_get_drvdata(dev);
1012        unsigned long min;
1013        u8 reg;
1014        unsigned long val;
1015        int err;
1016
1017        err = kstrtoul(buf, 10, &val);
1018        if (err)
1019                return err;
1020
1021        mutex_lock(&data->update_lock);
1022
1023        /* Save fan_min */
1024        min = FAN_FROM_REG(data->fan_min[nr],
1025                           DIV_FROM_REG(data->fan_div[nr]));
1026
1027        data->fan_div[nr] = DIV_TO_REG(val);
1028
1029        reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
1030               & (nr==0 ? 0xcf : 0x3f))
1031            | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
1032        w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
1033
1034        reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
1035               & ~(1 << (5 + nr)))
1036            | ((data->fan_div[nr] & 0x04) << (3 + nr));
1037        w83627hf_write_value(data, W83781D_REG_VBAT, reg);
1038
1039        /* Restore fan_min */
1040        data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
1041        w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]);
1042
1043        mutex_unlock(&data->update_lock);
1044        return count;
1045}
1046
1047static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR,
1048                          show_fan_div, store_fan_div, 0);
1049static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR,
1050                          show_fan_div, store_fan_div, 1);
1051static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR,
1052                          show_fan_div, store_fan_div, 2);
1053
1054static ssize_t
1055show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
1056{
1057        int nr = to_sensor_dev_attr(devattr)->index;
1058        struct w83627hf_data *data = w83627hf_update_device(dev);
1059        return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
1060}
1061
1062static ssize_t
1063store_pwm(struct device *dev, struct device_attribute *devattr,
1064          const char *buf, size_t count)
1065{
1066        int nr = to_sensor_dev_attr(devattr)->index;
1067        struct w83627hf_data *data = dev_get_drvdata(dev);
1068        unsigned long val;
1069        int err;
1070
1071        err = kstrtoul(buf, 10, &val);
1072        if (err)
1073                return err;
1074
1075        mutex_lock(&data->update_lock);
1076
1077        if (data->type == w83627thf) {
1078                /* bits 0-3 are reserved  in 627THF */
1079                data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
1080                w83627hf_write_value(data,
1081                                     W836X7HF_REG_PWM(data->type, nr),
1082                                     data->pwm[nr] |
1083                                     (w83627hf_read_value(data,
1084                                     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
1085        } else {
1086                data->pwm[nr] = PWM_TO_REG(val);
1087                w83627hf_write_value(data,
1088                                     W836X7HF_REG_PWM(data->type, nr),
1089                                     data->pwm[nr]);
1090        }
1091
1092        mutex_unlock(&data->update_lock);
1093        return count;
1094}
1095
1096static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0);
1097static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
1098static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
1099
1100static ssize_t
1101show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
1102{
1103        int nr = to_sensor_dev_attr(devattr)->index;
1104        struct w83627hf_data *data = w83627hf_update_device(dev);
1105        return sprintf(buf, "%d\n", data->pwm_enable[nr]);
1106}
1107
1108static ssize_t
1109store_pwm_enable(struct device *dev, struct device_attribute *devattr,
1110          const char *buf, size_t count)
1111{
1112        int nr = to_sensor_dev_attr(devattr)->index;
1113        struct w83627hf_data *data = dev_get_drvdata(dev);
1114        u8 reg;
1115        unsigned long val;
1116        int err;
1117
1118        err = kstrtoul(buf, 10, &val);
1119        if (err)
1120                return err;
1121
1122        if (!val || val > 3)    /* modes 1, 2 and 3 are supported */
1123                return -EINVAL;
1124        mutex_lock(&data->update_lock);
1125        data->pwm_enable[nr] = val;
1126        reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
1127        reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
1128        reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
1129        w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
1130        mutex_unlock(&data->update_lock);
1131        return count;
1132}
1133
1134static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1135                                                  store_pwm_enable, 0);
1136static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1137                                                  store_pwm_enable, 1);
1138static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1139                                                  store_pwm_enable, 2);
1140
1141static ssize_t
1142show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
1143{
1144        int nr = to_sensor_dev_attr(devattr)->index;
1145        struct w83627hf_data *data = w83627hf_update_device(dev);
1146        if (data->type == w83627hf)
1147                return sprintf(buf, "%ld\n",
1148                        pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
1149        else
1150                return sprintf(buf, "%ld\n",
1151                        pwm_freq_from_reg(data->pwm_freq[nr]));
1152}
1153
1154static ssize_t
1155store_pwm_freq(struct device *dev, struct device_attribute *devattr,
1156               const char *buf, size_t count)
1157{
1158        int nr = to_sensor_dev_attr(devattr)->index;
1159        struct w83627hf_data *data = dev_get_drvdata(dev);
1160        static const u8 mask[]={0xF8, 0x8F};
1161        unsigned long val;
1162        int err;
1163
1164        err = kstrtoul(buf, 10, &val);
1165        if (err)
1166                return err;
1167
1168        mutex_lock(&data->update_lock);
1169
1170        if (data->type == w83627hf) {
1171                data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
1172                w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
1173                                (data->pwm_freq[nr] << (nr*4)) |
1174                                (w83627hf_read_value(data,
1175                                W83627HF_REG_PWM_FREQ) & mask[nr]));
1176        } else {
1177                data->pwm_freq[nr] = pwm_freq_to_reg(val);
1178                w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
1179                                data->pwm_freq[nr]);
1180        }
1181
1182        mutex_unlock(&data->update_lock);
1183        return count;
1184}
1185
1186static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR,
1187                          show_pwm_freq, store_pwm_freq, 0);
1188static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR,
1189                          show_pwm_freq, store_pwm_freq, 1);
1190static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR,
1191                          show_pwm_freq, store_pwm_freq, 2);
1192
1193static ssize_t
1194show_temp_type(struct device *dev, struct device_attribute *devattr,
1195               char *buf)
1196{
1197        int nr = to_sensor_dev_attr(devattr)->index;
1198        struct w83627hf_data *data = w83627hf_update_device(dev);
1199        return sprintf(buf, "%ld\n", (long) data->sens[nr]);
1200}
1201
1202static ssize_t
1203store_temp_type(struct device *dev, struct device_attribute *devattr,
1204                const char *buf, size_t count)
1205{
1206        int nr = to_sensor_dev_attr(devattr)->index;
1207        struct w83627hf_data *data = dev_get_drvdata(dev);
1208        unsigned long val;
1209        u32 tmp;
1210        int err;
1211
1212        err = kstrtoul(buf, 10, &val);
1213        if (err)
1214                return err;
1215
1216        mutex_lock(&data->update_lock);
1217
1218        switch (val) {
1219        case 1:         /* PII/Celeron diode */
1220                tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1221                w83627hf_write_value(data, W83781D_REG_SCFG1,
1222                                    tmp | BIT_SCFG1[nr]);
1223                tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1224                w83627hf_write_value(data, W83781D_REG_SCFG2,
1225                                    tmp | BIT_SCFG2[nr]);
1226                data->sens[nr] = val;
1227                break;
1228        case 2:         /* 3904 */
1229                tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1230                w83627hf_write_value(data, W83781D_REG_SCFG1,
1231                                    tmp | BIT_SCFG1[nr]);
1232                tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1233                w83627hf_write_value(data, W83781D_REG_SCFG2,
1234                                    tmp & ~BIT_SCFG2[nr]);
1235                data->sens[nr] = val;
1236                break;
1237        case W83781D_DEFAULT_BETA:
1238                dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
1239                         "instead\n", W83781D_DEFAULT_BETA);
1240                /* fall through */
1241        case 4:         /* thermistor */
1242                tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1243                w83627hf_write_value(data, W83781D_REG_SCFG1,
1244                                    tmp & ~BIT_SCFG1[nr]);
1245                data->sens[nr] = val;
1246                break;
1247        default:
1248                dev_err(dev,
1249                       "Invalid sensor type %ld; must be 1, 2, or 4\n",
1250                       (long) val);
1251                break;
1252        }
1253
1254        mutex_unlock(&data->update_lock);
1255        return count;
1256}
1257
1258#define sysfs_temp_type(offset) \
1259static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
1260                          show_temp_type, store_temp_type, offset - 1);
1261
1262sysfs_temp_type(1);
1263sysfs_temp_type(2);
1264sysfs_temp_type(3);
1265
1266static ssize_t
1267show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1268{
1269        struct w83627hf_data *data = dev_get_drvdata(dev);
1270
1271        return sprintf(buf, "%s\n", data->name);
1272}
1273static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1274
1275static int __init w83627hf_find(int sioaddr, unsigned short *addr,
1276                                struct w83627hf_sio_data *sio_data)
1277{
1278        int err = -ENODEV;
1279        u16 val;
1280
1281        static __initconst char *const names[] = {
1282                "W83627HF",
1283                "W83627THF",
1284                "W83697HF",
1285                "W83637HF",
1286                "W83687THF",
1287        };
1288
1289        sio_data->sioaddr = sioaddr;
1290        superio_enter(sio_data);
1291        val = force_id ? force_id : superio_inb(sio_data, DEVID);
1292        switch (val) {
1293        case W627_DEVID:
1294                sio_data->type = w83627hf;
1295                break;
1296        case W627THF_DEVID:
1297                sio_data->type = w83627thf;
1298                break;
1299        case W697_DEVID:
1300                sio_data->type = w83697hf;
1301                break;
1302        case W637_DEVID:
1303                sio_data->type = w83637hf;
1304                break;
1305        case W687THF_DEVID:
1306                sio_data->type = w83687thf;
1307                break;
1308        case 0xff:      /* No device at all */
1309                goto exit;
1310        default:
1311                pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val);
1312                goto exit;
1313        }
1314
1315        superio_select(sio_data, W83627HF_LD_HWM);
1316        val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
1317               superio_inb(sio_data, WINB_BASE_REG + 1);
1318        *addr = val & WINB_ALIGNMENT;
1319        if (*addr == 0) {
1320                pr_warn("Base address not set, skipping\n");
1321                goto exit;
1322        }
1323
1324        val = superio_inb(sio_data, WINB_ACT_REG);
1325        if (!(val & 0x01)) {
1326                pr_warn("Enabling HWM logical device\n");
1327                superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
1328        }
1329
1330        err = 0;
1331        pr_info(DRVNAME ": Found %s chip at %#x\n",
1332                names[sio_data->type], *addr);
1333
1334 exit:
1335        superio_exit(sio_data);
1336        return err;
1337}
1338
1339#define VIN_UNIT_ATTRS(_X_)     \
1340        &sensor_dev_attr_in##_X_##_input.dev_attr.attr,         \
1341        &sensor_dev_attr_in##_X_##_min.dev_attr.attr,           \
1342        &sensor_dev_attr_in##_X_##_max.dev_attr.attr,           \
1343        &sensor_dev_attr_in##_X_##_alarm.dev_attr.attr,         \
1344        &sensor_dev_attr_in##_X_##_beep.dev_attr.attr
1345
1346#define FAN_UNIT_ATTRS(_X_)     \
1347        &sensor_dev_attr_fan##_X_##_input.dev_attr.attr,        \
1348        &sensor_dev_attr_fan##_X_##_min.dev_attr.attr,          \
1349        &sensor_dev_attr_fan##_X_##_div.dev_attr.attr,          \
1350        &sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr,        \
1351        &sensor_dev_attr_fan##_X_##_beep.dev_attr.attr
1352
1353#define TEMP_UNIT_ATTRS(_X_)    \
1354        &sensor_dev_attr_temp##_X_##_input.dev_attr.attr,       \
1355        &sensor_dev_attr_temp##_X_##_max.dev_attr.attr,         \
1356        &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr,    \
1357        &sensor_dev_attr_temp##_X_##_type.dev_attr.attr,        \
1358        &sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr,       \
1359        &sensor_dev_attr_temp##_X_##_beep.dev_attr.attr
1360
1361static struct attribute *w83627hf_attributes[] = {
1362        &dev_attr_in0_input.attr,
1363        &dev_attr_in0_min.attr,
1364        &dev_attr_in0_max.attr,
1365        &sensor_dev_attr_in0_alarm.dev_attr.attr,
1366        &sensor_dev_attr_in0_beep.dev_attr.attr,
1367        VIN_UNIT_ATTRS(2),
1368        VIN_UNIT_ATTRS(3),
1369        VIN_UNIT_ATTRS(4),
1370        VIN_UNIT_ATTRS(7),
1371        VIN_UNIT_ATTRS(8),
1372
1373        FAN_UNIT_ATTRS(1),
1374        FAN_UNIT_ATTRS(2),
1375
1376        TEMP_UNIT_ATTRS(1),
1377        TEMP_UNIT_ATTRS(2),
1378
1379        &dev_attr_alarms.attr,
1380        &sensor_dev_attr_beep_enable.dev_attr.attr,
1381        &dev_attr_beep_mask.attr,
1382
1383        &sensor_dev_attr_pwm1.dev_attr.attr,
1384        &sensor_dev_attr_pwm2.dev_attr.attr,
1385        &dev_attr_name.attr,
1386        NULL
1387};
1388
1389static const struct attribute_group w83627hf_group = {
1390        .attrs = w83627hf_attributes,
1391};
1392
1393static struct attribute *w83627hf_attributes_opt[] = {
1394        VIN_UNIT_ATTRS(1),
1395        VIN_UNIT_ATTRS(5),
1396        VIN_UNIT_ATTRS(6),
1397
1398        FAN_UNIT_ATTRS(3),
1399        TEMP_UNIT_ATTRS(3),
1400        &sensor_dev_attr_pwm3.dev_attr.attr,
1401
1402        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1403        &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1404        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1405
1406        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1407        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1408        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1409
1410        NULL
1411};
1412
1413static const struct attribute_group w83627hf_group_opt = {
1414        .attrs = w83627hf_attributes_opt,
1415};
1416
1417static int w83627hf_probe(struct platform_device *pdev)
1418{
1419        struct device *dev = &pdev->dev;
1420        struct w83627hf_sio_data *sio_data = dev_get_platdata(dev);
1421        struct w83627hf_data *data;
1422        struct resource *res;
1423        int err, i;
1424
1425        static const char *names[] = {
1426                "w83627hf",
1427                "w83627thf",
1428                "w83697hf",
1429                "w83637hf",
1430                "w83687thf",
1431        };
1432
1433        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1434        if (!devm_request_region(dev, res->start, WINB_REGION_SIZE, DRVNAME)) {
1435                dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1436                        (unsigned long)res->start,
1437                        (unsigned long)(res->start + WINB_REGION_SIZE - 1));
1438                return -EBUSY;
1439        }
1440
1441        data = devm_kzalloc(dev, sizeof(struct w83627hf_data), GFP_KERNEL);
1442        if (!data)
1443                return -ENOMEM;
1444
1445        data->addr = res->start;
1446        data->type = sio_data->type;
1447        data->name = names[sio_data->type];
1448        mutex_init(&data->lock);
1449        mutex_init(&data->update_lock);
1450        platform_set_drvdata(pdev, data);
1451
1452        /* Initialize the chip */
1453        w83627hf_init_device(pdev);
1454
1455        /* A few vars need to be filled upon startup */
1456        for (i = 0; i <= 2; i++)
1457                data->fan_min[i] = w83627hf_read_value(
1458                                        data, W83627HF_REG_FAN_MIN(i));
1459        w83627hf_update_fan_div(data);
1460
1461        /* Register common device attributes */
1462        err = sysfs_create_group(&dev->kobj, &w83627hf_group);
1463        if (err)
1464                return err;
1465
1466        /* Register chip-specific device attributes */
1467        if (data->type == w83627hf || data->type == w83697hf)
1468                if ((err = device_create_file(dev,
1469                                &sensor_dev_attr_in5_input.dev_attr))
1470                 || (err = device_create_file(dev,
1471                                &sensor_dev_attr_in5_min.dev_attr))
1472                 || (err = device_create_file(dev,
1473                                &sensor_dev_attr_in5_max.dev_attr))
1474                 || (err = device_create_file(dev,
1475                                &sensor_dev_attr_in5_alarm.dev_attr))
1476                 || (err = device_create_file(dev,
1477                                &sensor_dev_attr_in5_beep.dev_attr))
1478                 || (err = device_create_file(dev,
1479                                &sensor_dev_attr_in6_input.dev_attr))
1480                 || (err = device_create_file(dev,
1481                                &sensor_dev_attr_in6_min.dev_attr))
1482                 || (err = device_create_file(dev,
1483                                &sensor_dev_attr_in6_max.dev_attr))
1484                 || (err = device_create_file(dev,
1485                                &sensor_dev_attr_in6_alarm.dev_attr))
1486                 || (err = device_create_file(dev,
1487                                &sensor_dev_attr_in6_beep.dev_attr))
1488                 || (err = device_create_file(dev,
1489                                &sensor_dev_attr_pwm1_freq.dev_attr))
1490                 || (err = device_create_file(dev,
1491                                &sensor_dev_attr_pwm2_freq.dev_attr)))
1492                        goto error;
1493
1494        if (data->type != w83697hf)
1495                if ((err = device_create_file(dev,
1496                                &sensor_dev_attr_in1_input.dev_attr))
1497                 || (err = device_create_file(dev,
1498                                &sensor_dev_attr_in1_min.dev_attr))
1499                 || (err = device_create_file(dev,
1500                                &sensor_dev_attr_in1_max.dev_attr))
1501                 || (err = device_create_file(dev,
1502                                &sensor_dev_attr_in1_alarm.dev_attr))
1503                 || (err = device_create_file(dev,
1504                                &sensor_dev_attr_in1_beep.dev_attr))
1505                 || (err = device_create_file(dev,
1506                                &sensor_dev_attr_fan3_input.dev_attr))
1507                 || (err = device_create_file(dev,
1508                                &sensor_dev_attr_fan3_min.dev_attr))
1509                 || (err = device_create_file(dev,
1510                                &sensor_dev_attr_fan3_div.dev_attr))
1511                 || (err = device_create_file(dev,
1512                                &sensor_dev_attr_fan3_alarm.dev_attr))
1513                 || (err = device_create_file(dev,
1514                                &sensor_dev_attr_fan3_beep.dev_attr))
1515                 || (err = device_create_file(dev,
1516                                &sensor_dev_attr_temp3_input.dev_attr))
1517                 || (err = device_create_file(dev,
1518                                &sensor_dev_attr_temp3_max.dev_attr))
1519                 || (err = device_create_file(dev,
1520                                &sensor_dev_attr_temp3_max_hyst.dev_attr))
1521                 || (err = device_create_file(dev,
1522                                &sensor_dev_attr_temp3_alarm.dev_attr))
1523                 || (err = device_create_file(dev,
1524                                &sensor_dev_attr_temp3_beep.dev_attr))
1525                 || (err = device_create_file(dev,
1526                                &sensor_dev_attr_temp3_type.dev_attr)))
1527                        goto error;
1528
1529        if (data->type != w83697hf && data->vid != 0xff) {
1530                /* Convert VID to voltage based on VRM */
1531                data->vrm = vid_which_vrm();
1532
1533                if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
1534                 || (err = device_create_file(dev, &dev_attr_vrm)))
1535                        goto error;
1536        }
1537
1538        if (data->type == w83627thf || data->type == w83637hf
1539            || data->type == w83687thf) {
1540                err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr);
1541                if (err)
1542                        goto error;
1543        }
1544
1545        if (data->type == w83637hf || data->type == w83687thf)
1546                if ((err = device_create_file(dev,
1547                                &sensor_dev_attr_pwm1_freq.dev_attr))
1548                 || (err = device_create_file(dev,
1549                                &sensor_dev_attr_pwm2_freq.dev_attr))
1550                 || (err = device_create_file(dev,
1551                                &sensor_dev_attr_pwm3_freq.dev_attr)))
1552                        goto error;
1553
1554        if (data->type != w83627hf)
1555                if ((err = device_create_file(dev,
1556                                &sensor_dev_attr_pwm1_enable.dev_attr))
1557                 || (err = device_create_file(dev,
1558                                &sensor_dev_attr_pwm2_enable.dev_attr)))
1559                        goto error;
1560
1561        if (data->type == w83627thf || data->type == w83637hf
1562            || data->type == w83687thf) {
1563                err = device_create_file(dev,
1564                                         &sensor_dev_attr_pwm3_enable.dev_attr);
1565                if (err)
1566                        goto error;
1567        }
1568
1569        data->hwmon_dev = hwmon_device_register(dev);
1570        if (IS_ERR(data->hwmon_dev)) {
1571                err = PTR_ERR(data->hwmon_dev);
1572                goto error;
1573        }
1574
1575        return 0;
1576
1577 error:
1578        sysfs_remove_group(&dev->kobj, &w83627hf_group);
1579        sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
1580        return err;
1581}
1582
1583static int w83627hf_remove(struct platform_device *pdev)
1584{
1585        struct w83627hf_data *data = platform_get_drvdata(pdev);
1586
1587        hwmon_device_unregister(data->hwmon_dev);
1588
1589        sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
1590        sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
1591
1592        return 0;
1593}
1594
1595
1596/* Registers 0x50-0x5f are banked */
1597static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
1598{
1599        if ((reg & 0x00f0) == 0x50) {
1600                outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1601                outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
1602        }
1603}
1604
1605/* Not strictly necessary, but play it safe for now */
1606static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
1607{
1608        if (reg & 0xff00) {
1609                outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1610                outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1611        }
1612}
1613
1614static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
1615{
1616        int res, word_sized;
1617
1618        mutex_lock(&data->lock);
1619        word_sized = (((reg & 0xff00) == 0x100)
1620                   || ((reg & 0xff00) == 0x200))
1621                  && (((reg & 0x00ff) == 0x50)
1622                   || ((reg & 0x00ff) == 0x53)
1623                   || ((reg & 0x00ff) == 0x55));
1624        w83627hf_set_bank(data, reg);
1625        outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1626        res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
1627        if (word_sized) {
1628                outb_p((reg & 0xff) + 1,
1629                       data->addr + W83781D_ADDR_REG_OFFSET);
1630                res =
1631                    (res << 8) + inb_p(data->addr +
1632                                       W83781D_DATA_REG_OFFSET);
1633        }
1634        w83627hf_reset_bank(data, reg);
1635        mutex_unlock(&data->lock);
1636        return res;
1637}
1638
1639static int w83627thf_read_gpio5(struct platform_device *pdev)
1640{
1641        struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1642        int res = 0xff, sel;
1643
1644        superio_enter(sio_data);
1645        superio_select(sio_data, W83627HF_LD_GPIO5);
1646
1647        /* Make sure these GPIO pins are enabled */
1648        if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
1649                dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
1650                goto exit;
1651        }
1652
1653        /*
1654         * Make sure the pins are configured for input
1655         * There must be at least five (VRM 9), and possibly 6 (VRM 10)
1656         */
1657        sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
1658        if ((sel & 0x1f) != 0x1f) {
1659                dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
1660                        "function\n");
1661                goto exit;
1662        }
1663
1664        dev_info(&pdev->dev, "Reading VID from GPIO5\n");
1665        res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
1666
1667exit:
1668        superio_exit(sio_data);
1669        return res;
1670}
1671
1672static int w83687thf_read_vid(struct platform_device *pdev)
1673{
1674        struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1675        int res = 0xff;
1676
1677        superio_enter(sio_data);
1678        superio_select(sio_data, W83627HF_LD_HWM);
1679
1680        /* Make sure these GPIO pins are enabled */
1681        if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
1682                dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
1683                goto exit;
1684        }
1685
1686        /* Make sure the pins are configured for input */
1687        if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
1688                dev_dbg(&pdev->dev, "VID configured as output, "
1689                        "no VID function\n");
1690                goto exit;
1691        }
1692
1693        res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
1694
1695exit:
1696        superio_exit(sio_data);
1697        return res;
1698}
1699
1700static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
1701{
1702        int word_sized;
1703
1704        mutex_lock(&data->lock);
1705        word_sized = (((reg & 0xff00) == 0x100)
1706                   || ((reg & 0xff00) == 0x200))
1707                  && (((reg & 0x00ff) == 0x53)
1708                   || ((reg & 0x00ff) == 0x55));
1709        w83627hf_set_bank(data, reg);
1710        outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1711        if (word_sized) {
1712                outb_p(value >> 8,
1713                       data->addr + W83781D_DATA_REG_OFFSET);
1714                outb_p((reg & 0xff) + 1,
1715                       data->addr + W83781D_ADDR_REG_OFFSET);
1716        }
1717        outb_p(value & 0xff,
1718               data->addr + W83781D_DATA_REG_OFFSET);
1719        w83627hf_reset_bank(data, reg);
1720        mutex_unlock(&data->lock);
1721        return 0;
1722}
1723
1724static void w83627hf_init_device(struct platform_device *pdev)
1725{
1726        struct w83627hf_data *data = platform_get_drvdata(pdev);
1727        int i;
1728        enum chips type = data->type;
1729        u8 tmp;
1730
1731        /* Minimize conflicts with other winbond i2c-only clients...  */
1732        /* disable i2c subclients... how to disable main i2c client?? */
1733        /* force i2c address to relatively uncommon address */
1734        if (type == w83627hf) {
1735                w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
1736                w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
1737        }
1738
1739        /* Read VID only once */
1740        if (type == w83627hf || type == w83637hf) {
1741                int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1742                int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
1743                data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1744        } else if (type == w83627thf) {
1745                data->vid = w83627thf_read_gpio5(pdev);
1746        } else if (type == w83687thf) {
1747                data->vid = w83687thf_read_vid(pdev);
1748        }
1749
1750        /* Read VRM & OVT Config only once */
1751        if (type == w83627thf || type == w83637hf || type == w83687thf) {
1752                data->vrm_ovt = 
1753                        w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
1754        }
1755
1756        tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1757        for (i = 1; i <= 3; i++) {
1758                if (!(tmp & BIT_SCFG1[i - 1])) {
1759                        data->sens[i - 1] = 4;
1760                } else {
1761                        if (w83627hf_read_value
1762                            (data,
1763                             W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1764                                data->sens[i - 1] = 1;
1765                        else
1766                                data->sens[i - 1] = 2;
1767                }
1768                if ((type == w83697hf) && (i == 2))
1769                        break;
1770        }
1771
1772        if(init) {
1773                /* Enable temp2 */
1774                tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG);
1775                if (tmp & 0x01) {
1776                        dev_warn(&pdev->dev, "Enabling temp2, readings "
1777                                 "might not make sense\n");
1778                        w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG,
1779                                tmp & 0xfe);
1780                }
1781
1782                /* Enable temp3 */
1783                if (type != w83697hf) {
1784                        tmp = w83627hf_read_value(data,
1785                                W83627HF_REG_TEMP3_CONFIG);
1786                        if (tmp & 0x01) {
1787                                dev_warn(&pdev->dev, "Enabling temp3, "
1788                                         "readings might not make sense\n");
1789                                w83627hf_write_value(data,
1790                                        W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe);
1791                        }
1792                }
1793        }
1794
1795        /* Start monitoring */
1796        w83627hf_write_value(data, W83781D_REG_CONFIG,
1797                            (w83627hf_read_value(data,
1798                                                W83781D_REG_CONFIG) & 0xf7)
1799                            | 0x01);
1800
1801        /* Enable VBAT monitoring if needed */
1802        tmp = w83627hf_read_value(data, W83781D_REG_VBAT);
1803        if (!(tmp & 0x01))
1804                w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01);
1805}
1806
1807static void w83627hf_update_fan_div(struct w83627hf_data *data)
1808{
1809        int reg;
1810
1811        reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1812        data->fan_div[0] = (reg >> 4) & 0x03;
1813        data->fan_div[1] = (reg >> 6) & 0x03;
1814        if (data->type != w83697hf) {
1815                data->fan_div[2] = (w83627hf_read_value(data,
1816                                       W83781D_REG_PIN) >> 6) & 0x03;
1817        }
1818        reg = w83627hf_read_value(data, W83781D_REG_VBAT);
1819        data->fan_div[0] |= (reg >> 3) & 0x04;
1820        data->fan_div[1] |= (reg >> 4) & 0x04;
1821        if (data->type != w83697hf)
1822                data->fan_div[2] |= (reg >> 5) & 0x04;
1823}
1824
1825static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1826{
1827        struct w83627hf_data *data = dev_get_drvdata(dev);
1828        int i, num_temps = (data->type == w83697hf) ? 2 : 3;
1829        int num_pwms = (data->type == w83697hf) ? 2 : 3;
1830
1831        mutex_lock(&data->update_lock);
1832
1833        if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1834            || !data->valid) {
1835                for (i = 0; i <= 8; i++) {
1836                        /* skip missing sensors */
1837                        if (((data->type == w83697hf) && (i == 1)) ||
1838                            ((data->type != w83627hf && data->type != w83697hf)
1839                            && (i == 5 || i == 6)))
1840                                continue;
1841                        data->in[i] =
1842                            w83627hf_read_value(data, W83781D_REG_IN(i));
1843                        data->in_min[i] =
1844                            w83627hf_read_value(data,
1845                                               W83781D_REG_IN_MIN(i));
1846                        data->in_max[i] =
1847                            w83627hf_read_value(data,
1848                                               W83781D_REG_IN_MAX(i));
1849                }
1850                for (i = 0; i <= 2; i++) {
1851                        data->fan[i] =
1852                            w83627hf_read_value(data, W83627HF_REG_FAN(i));
1853                        data->fan_min[i] =
1854                            w83627hf_read_value(data,
1855                                               W83627HF_REG_FAN_MIN(i));
1856                }
1857                for (i = 0; i <= 2; i++) {
1858                        u8 tmp = w83627hf_read_value(data,
1859                                W836X7HF_REG_PWM(data->type, i));
1860                        /* bits 0-3 are reserved  in 627THF */
1861                        if (data->type == w83627thf)
1862                                tmp &= 0xf0;
1863                        data->pwm[i] = tmp;
1864                        if (i == 1 &&
1865                            (data->type == w83627hf || data->type == w83697hf))
1866                                break;
1867                }
1868                if (data->type == w83627hf) {
1869                                u8 tmp = w83627hf_read_value(data,
1870                                                W83627HF_REG_PWM_FREQ);
1871                                data->pwm_freq[0] = tmp & 0x07;
1872                                data->pwm_freq[1] = (tmp >> 4) & 0x07;
1873                } else if (data->type != w83627thf) {
1874                        for (i = 1; i <= 3; i++) {
1875                                data->pwm_freq[i - 1] =
1876                                        w83627hf_read_value(data,
1877                                                W83637HF_REG_PWM_FREQ[i - 1]);
1878                                if (i == 2 && (data->type == w83697hf))
1879                                        break;
1880                        }
1881                }
1882                if (data->type != w83627hf) {
1883                        for (i = 0; i < num_pwms; i++) {
1884                                u8 tmp = w83627hf_read_value(data,
1885                                        W83627THF_REG_PWM_ENABLE[i]);
1886                                data->pwm_enable[i] =
1887                                        ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
1888                                        & 0x03) + 1;
1889                        }
1890                }
1891                for (i = 0; i < num_temps; i++) {
1892                        data->temp[i] = w83627hf_read_value(
1893                                                data, w83627hf_reg_temp[i]);
1894                        data->temp_max[i] = w83627hf_read_value(
1895                                                data, w83627hf_reg_temp_over[i]);
1896                        data->temp_max_hyst[i] = w83627hf_read_value(
1897                                                data, w83627hf_reg_temp_hyst[i]);
1898                }
1899
1900                w83627hf_update_fan_div(data);
1901
1902                data->alarms =
1903                    w83627hf_read_value(data, W83781D_REG_ALARM1) |
1904                    (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
1905                    (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
1906                i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
1907                data->beep_mask = (i << 8) |
1908                    w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
1909                    w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
1910                data->last_updated = jiffies;
1911                data->valid = 1;
1912        }
1913
1914        mutex_unlock(&data->update_lock);
1915
1916        return data;
1917}
1918
1919static int __init w83627hf_device_add(unsigned short address,
1920                                      const struct w83627hf_sio_data *sio_data)
1921{
1922        struct resource res = {
1923                .start  = address + WINB_REGION_OFFSET,
1924                .end    = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
1925                .name   = DRVNAME,
1926                .flags  = IORESOURCE_IO,
1927        };
1928        int err;
1929
1930        err = acpi_check_resource_conflict(&res);
1931        if (err)
1932                goto exit;
1933
1934        pdev = platform_device_alloc(DRVNAME, address);
1935        if (!pdev) {
1936                err = -ENOMEM;
1937                pr_err("Device allocation failed\n");
1938                goto exit;
1939        }
1940
1941        err = platform_device_add_resources(pdev, &res, 1);
1942        if (err) {
1943                pr_err("Device resource addition failed (%d)\n", err);
1944                goto exit_device_put;
1945        }
1946
1947        err = platform_device_add_data(pdev, sio_data,
1948                                       sizeof(struct w83627hf_sio_data));
1949        if (err) {
1950                pr_err("Platform data allocation failed\n");
1951                goto exit_device_put;
1952        }
1953
1954        err = platform_device_add(pdev);
1955        if (err) {
1956                pr_err("Device addition failed (%d)\n", err);
1957                goto exit_device_put;
1958        }
1959
1960        return 0;
1961
1962exit_device_put:
1963        platform_device_put(pdev);
1964exit:
1965        return err;
1966}
1967
1968static int __init sensors_w83627hf_init(void)
1969{
1970        int err;
1971        unsigned short address;
1972        struct w83627hf_sio_data sio_data;
1973
1974        if (w83627hf_find(0x2e, &address, &sio_data)
1975         && w83627hf_find(0x4e, &address, &sio_data))
1976                return -ENODEV;
1977
1978        err = platform_driver_register(&w83627hf_driver);
1979        if (err)
1980                goto exit;
1981
1982        /* Sets global pdev as a side effect */
1983        err = w83627hf_device_add(address, &sio_data);
1984        if (err)
1985                goto exit_driver;
1986
1987        return 0;
1988
1989exit_driver:
1990        platform_driver_unregister(&w83627hf_driver);
1991exit:
1992        return err;
1993}
1994
1995static void __exit sensors_w83627hf_exit(void)
1996{
1997        platform_device_unregister(pdev);
1998        platform_driver_unregister(&w83627hf_driver);
1999}
2000
2001MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2002              "Philip Edelbrock <phil@netroedge.com>, "
2003              "and Mark Studebaker <mdsxyz123@yahoo.com>");
2004MODULE_DESCRIPTION("W83627HF driver");
2005MODULE_LICENSE("GPL");
2006
2007module_init(sensors_w83627hf_init);
2008module_exit(sensors_w83627hf_exit);
2009