linux/drivers/ide/aec62xx.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
   3 * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
   4 *
   5 */
   6
   7#include <linux/module.h>
   8#include <linux/types.h>
   9#include <linux/pci.h>
  10#include <linux/ide.h>
  11#include <linux/init.h>
  12
  13#include <asm/io.h>
  14
  15#define DRV_NAME "aec62xx"
  16
  17struct chipset_bus_clock_list_entry {
  18        u8 xfer_speed;
  19        u8 chipset_settings;
  20        u8 ultra_settings;
  21};
  22
  23static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
  24        {       XFER_UDMA_6,    0x31,   0x07    },
  25        {       XFER_UDMA_5,    0x31,   0x06    },
  26        {       XFER_UDMA_4,    0x31,   0x05    },
  27        {       XFER_UDMA_3,    0x31,   0x04    },
  28        {       XFER_UDMA_2,    0x31,   0x03    },
  29        {       XFER_UDMA_1,    0x31,   0x02    },
  30        {       XFER_UDMA_0,    0x31,   0x01    },
  31
  32        {       XFER_MW_DMA_2,  0x31,   0x00    },
  33        {       XFER_MW_DMA_1,  0x31,   0x00    },
  34        {       XFER_MW_DMA_0,  0x0a,   0x00    },
  35        {       XFER_PIO_4,     0x31,   0x00    },
  36        {       XFER_PIO_3,     0x33,   0x00    },
  37        {       XFER_PIO_2,     0x08,   0x00    },
  38        {       XFER_PIO_1,     0x0a,   0x00    },
  39        {       XFER_PIO_0,     0x00,   0x00    },
  40        {       0,              0x00,   0x00    }
  41};
  42
  43static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
  44        {       XFER_UDMA_6,    0x41,   0x06    },
  45        {       XFER_UDMA_5,    0x41,   0x05    },
  46        {       XFER_UDMA_4,    0x41,   0x04    },
  47        {       XFER_UDMA_3,    0x41,   0x03    },
  48        {       XFER_UDMA_2,    0x41,   0x02    },
  49        {       XFER_UDMA_1,    0x41,   0x01    },
  50        {       XFER_UDMA_0,    0x41,   0x01    },
  51
  52        {       XFER_MW_DMA_2,  0x41,   0x00    },
  53        {       XFER_MW_DMA_1,  0x42,   0x00    },
  54        {       XFER_MW_DMA_0,  0x7a,   0x00    },
  55        {       XFER_PIO_4,     0x41,   0x00    },
  56        {       XFER_PIO_3,     0x43,   0x00    },
  57        {       XFER_PIO_2,     0x78,   0x00    },
  58        {       XFER_PIO_1,     0x7a,   0x00    },
  59        {       XFER_PIO_0,     0x70,   0x00    },
  60        {       0,              0x00,   0x00    }
  61};
  62
  63/*
  64 * TO DO: active tuning and correction of cards without a bios.
  65 */
  66static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
  67{
  68        for ( ; chipset_table->xfer_speed ; chipset_table++)
  69                if (chipset_table->xfer_speed == speed) {
  70                        return chipset_table->chipset_settings;
  71                }
  72        return chipset_table->chipset_settings;
  73}
  74
  75static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
  76{
  77        for ( ; chipset_table->xfer_speed ; chipset_table++)
  78                if (chipset_table->xfer_speed == speed) {
  79                        return chipset_table->ultra_settings;
  80                }
  81        return chipset_table->ultra_settings;
  82}
  83
  84static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
  85{
  86        struct pci_dev *dev     = to_pci_dev(hwif->dev);
  87        struct ide_host *host   = pci_get_drvdata(dev);
  88        struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
  89        u16 d_conf              = 0;
  90        u8 ultra = 0, ultra_conf = 0;
  91        u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
  92        const u8 speed = drive->dma_mode;
  93        unsigned long flags;
  94
  95        local_irq_save(flags);
  96        /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
  97        pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
  98        tmp0 = pci_bus_clock_list(speed, bus_clock);
  99        d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
 100        pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
 101
 102        tmp1 = 0x00;
 103        tmp2 = 0x00;
 104        pci_read_config_byte(dev, 0x54, &ultra);
 105        tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
 106        ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
 107        tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
 108        pci_write_config_byte(dev, 0x54, tmp2);
 109        local_irq_restore(flags);
 110}
 111
 112static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 113{
 114        struct pci_dev *dev     = to_pci_dev(hwif->dev);
 115        struct ide_host *host   = pci_get_drvdata(dev);
 116        struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 117        u8 unit                 = drive->dn & 1;
 118        u8 tmp1 = 0, tmp2 = 0;
 119        u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
 120        const u8 speed = drive->dma_mode;
 121        unsigned long flags;
 122
 123        local_irq_save(flags);
 124        /* high 4-bits: Active, low 4-bits: Recovery */
 125        pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
 126        drive_conf = pci_bus_clock_list(speed, bus_clock);
 127        pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
 128
 129        pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
 130        tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
 131        ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
 132        tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
 133        pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
 134        local_irq_restore(flags);
 135}
 136
 137static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 138{
 139        drive->dma_mode = drive->pio_mode;
 140        hwif->port_ops->set_dma_mode(hwif, drive);
 141}
 142
 143static int init_chipset_aec62xx(struct pci_dev *dev)
 144{
 145        /* These are necessary to get AEC6280 Macintosh cards to work */
 146        if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
 147            (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
 148                u8 reg49h = 0, reg4ah = 0;
 149                /* Clear reset and test bits.  */
 150                pci_read_config_byte(dev, 0x49, &reg49h);
 151                pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
 152                /* Enable chip interrupt output.  */
 153                pci_read_config_byte(dev, 0x4a, &reg4ah);
 154                pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
 155                /* Enable burst mode. */
 156                pci_read_config_byte(dev, 0x4a, &reg4ah);
 157                pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
 158        }
 159
 160        return 0;
 161}
 162
 163static u8 atp86x_cable_detect(ide_hwif_t *hwif)
 164{
 165        struct pci_dev *dev = to_pci_dev(hwif->dev);
 166        u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
 167
 168        pci_read_config_byte(dev, 0x49, &ata66);
 169
 170        return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 171}
 172
 173static const struct ide_port_ops atp850_port_ops = {
 174        .set_pio_mode           = aec_set_pio_mode,
 175        .set_dma_mode           = aec6210_set_mode,
 176};
 177
 178static const struct ide_port_ops atp86x_port_ops = {
 179        .set_pio_mode           = aec_set_pio_mode,
 180        .set_dma_mode           = aec6260_set_mode,
 181        .cable_detect           = atp86x_cable_detect,
 182};
 183
 184static const struct ide_port_info aec62xx_chipsets[] = {
 185        {       /* 0: AEC6210 */
 186                .name           = DRV_NAME,
 187                .init_chipset   = init_chipset_aec62xx,
 188                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 189                .port_ops       = &atp850_port_ops,
 190                .host_flags     = IDE_HFLAG_SERIALIZE |
 191                                  IDE_HFLAG_NO_ATAPI_DMA |
 192                                  IDE_HFLAG_NO_DSC |
 193                                  IDE_HFLAG_OFF_BOARD,
 194                .pio_mask       = ATA_PIO4,
 195                .mwdma_mask     = ATA_MWDMA2,
 196                .udma_mask      = ATA_UDMA2,
 197        },
 198        {       /* 1: AEC6260 */
 199                .name           = DRV_NAME,
 200                .init_chipset   = init_chipset_aec62xx,
 201                .port_ops       = &atp86x_port_ops,
 202                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
 203                                  IDE_HFLAG_OFF_BOARD,
 204                .pio_mask       = ATA_PIO4,
 205                .mwdma_mask     = ATA_MWDMA2,
 206                .udma_mask      = ATA_UDMA4,
 207        },
 208        {       /* 2: AEC6260R */
 209                .name           = DRV_NAME,
 210                .init_chipset   = init_chipset_aec62xx,
 211                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 212                .port_ops       = &atp86x_port_ops,
 213                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
 214                                  IDE_HFLAG_NON_BOOTABLE,
 215                .pio_mask       = ATA_PIO4,
 216                .mwdma_mask     = ATA_MWDMA2,
 217                .udma_mask      = ATA_UDMA4,
 218        },
 219        {       /* 3: AEC6280 */
 220                .name           = DRV_NAME,
 221                .init_chipset   = init_chipset_aec62xx,
 222                .port_ops       = &atp86x_port_ops,
 223                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
 224                                  IDE_HFLAG_OFF_BOARD,
 225                .pio_mask       = ATA_PIO4,
 226                .mwdma_mask     = ATA_MWDMA2,
 227                .udma_mask      = ATA_UDMA5,
 228        },
 229        {       /* 4: AEC6280R */
 230                .name           = DRV_NAME,
 231                .init_chipset   = init_chipset_aec62xx,
 232                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 233                .port_ops       = &atp86x_port_ops,
 234                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
 235                                  IDE_HFLAG_OFF_BOARD,
 236                .pio_mask       = ATA_PIO4,
 237                .mwdma_mask     = ATA_MWDMA2,
 238                .udma_mask      = ATA_UDMA5,
 239        }
 240};
 241
 242/**
 243 *      aec62xx_init_one        -       called when a AEC is found
 244 *      @dev: the aec62xx device
 245 *      @id: the matching pci id
 246 *
 247 *      Called when the PCI registration layer (or the IDE initialization)
 248 *      finds a device matching our IDE device tables.
 249 *
 250 *      NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
 251 *      chips, pass a local copy of 'struct ide_port_info' down the call chain.
 252 */
 253
 254static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 255{
 256        const struct chipset_bus_clock_list_entry *bus_clock;
 257        struct ide_port_info d;
 258        u8 idx = id->driver_data;
 259        int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 260        int err;
 261
 262        if (bus_speed <= 33)
 263                bus_clock = aec6xxx_33_base;
 264        else
 265                bus_clock = aec6xxx_34_base;
 266
 267        err = pci_enable_device(dev);
 268        if (err)
 269                return err;
 270
 271        d = aec62xx_chipsets[idx];
 272
 273        if (idx == 3 || idx == 4) {
 274                unsigned long dma_base = pci_resource_start(dev, 4);
 275
 276                if (inb(dma_base + 2) & 0x10) {
 277                        printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
 278                                "\n", pci_name(dev), (idx == 4) ? "R" : "");
 279                        d.udma_mask = ATA_UDMA6;
 280                }
 281        }
 282
 283        err = ide_pci_init_one(dev, &d, (void *)bus_clock);
 284        if (err)
 285                pci_disable_device(dev);
 286
 287        return err;
 288}
 289
 290static void aec62xx_remove(struct pci_dev *dev)
 291{
 292        ide_pci_remove(dev);
 293        pci_disable_device(dev);
 294}
 295
 296static const struct pci_device_id aec62xx_pci_tbl[] = {
 297        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
 298        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860),   1 },
 299        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R),  2 },
 300        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865),   3 },
 301        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R),  4 },
 302        { 0, },
 303};
 304MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
 305
 306static struct pci_driver aec62xx_pci_driver = {
 307        .name           = "AEC62xx_IDE",
 308        .id_table       = aec62xx_pci_tbl,
 309        .probe          = aec62xx_init_one,
 310        .remove         = aec62xx_remove,
 311        .suspend        = ide_pci_suspend,
 312        .resume         = ide_pci_resume,
 313};
 314
 315static int __init aec62xx_ide_init(void)
 316{
 317        return ide_pci_register_driver(&aec62xx_pci_driver);
 318}
 319
 320static void __exit aec62xx_ide_exit(void)
 321{
 322        pci_unregister_driver(&aec62xx_pci_driver);
 323}
 324
 325module_init(aec62xx_ide_init);
 326module_exit(aec62xx_ide_exit);
 327
 328MODULE_AUTHOR("Andre Hedrick");
 329MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
 330MODULE_LICENSE("GPL");
 331