linux/drivers/input/touchscreen/elants_i2c.c
<<
>>
Prefs
   1/*
   2 * Elan Microelectronics touch panels with I2C interface
   3 *
   4 * Copyright (C) 2014 Elan Microelectronics Corporation.
   5 * Scott Liu <scott.liu@emc.com.tw>
   6 *
   7 * This code is partly based on hid-multitouch.c:
   8 *
   9 *  Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
  10 *  Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
  11 *  Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France
  12 *
  13 *
  14 * This code is partly based on i2c-hid.c:
  15 *
  16 * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
  17 * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
  18 * Copyright (c) 2012 Red Hat, Inc
  19 */
  20
  21/*
  22 * This software is licensed under the terms of the GNU General Public
  23 * License version 2, as published by the Free Software Foundation, and
  24 * may be copied, distributed, and modified under those terms.
  25 */
  26
  27#include <linux/module.h>
  28#include <linux/input.h>
  29#include <linux/interrupt.h>
  30#include <linux/platform_device.h>
  31#include <linux/async.h>
  32#include <linux/i2c.h>
  33#include <linux/delay.h>
  34#include <linux/uaccess.h>
  35#include <linux/buffer_head.h>
  36#include <linux/slab.h>
  37#include <linux/firmware.h>
  38#include <linux/input/mt.h>
  39#include <linux/acpi.h>
  40#include <linux/of.h>
  41#include <linux/gpio/consumer.h>
  42#include <linux/regulator/consumer.h>
  43#include <asm/unaligned.h>
  44
  45/* Device, Driver information */
  46#define DEVICE_NAME     "elants_i2c"
  47#define DRV_VERSION     "1.0.9"
  48
  49/* Convert from rows or columns into resolution */
  50#define ELAN_TS_RESOLUTION(n, m)   (((n) - 1) * (m))
  51
  52/* FW header data */
  53#define HEADER_SIZE             4
  54#define FW_HDR_TYPE             0
  55#define FW_HDR_COUNT            1
  56#define FW_HDR_LENGTH           2
  57
  58/* Buffer mode Queue Header information */
  59#define QUEUE_HEADER_SINGLE     0x62
  60#define QUEUE_HEADER_NORMAL     0X63
  61#define QUEUE_HEADER_WAIT       0x64
  62
  63/* Command header definition */
  64#define CMD_HEADER_WRITE        0x54
  65#define CMD_HEADER_READ         0x53
  66#define CMD_HEADER_6B_READ      0x5B
  67#define CMD_HEADER_RESP         0x52
  68#define CMD_HEADER_6B_RESP      0x9B
  69#define CMD_HEADER_HELLO        0x55
  70#define CMD_HEADER_REK          0x66
  71
  72/* FW position data */
  73#define PACKET_SIZE             55
  74#define MAX_CONTACT_NUM         10
  75#define FW_POS_HEADER           0
  76#define FW_POS_STATE            1
  77#define FW_POS_TOTAL            2
  78#define FW_POS_XY               3
  79#define FW_POS_CHECKSUM         34
  80#define FW_POS_WIDTH            35
  81#define FW_POS_PRESSURE         45
  82
  83#define HEADER_REPORT_10_FINGER 0x62
  84
  85/* Header (4 bytes) plus 3 fill 10-finger packets */
  86#define MAX_PACKET_SIZE         169
  87
  88#define BOOT_TIME_DELAY_MS      50
  89
  90/* FW read command, 0x53 0x?? 0x0, 0x01 */
  91#define E_ELAN_INFO_FW_VER      0x00
  92#define E_ELAN_INFO_BC_VER      0x10
  93#define E_ELAN_INFO_TEST_VER    0xE0
  94#define E_ELAN_INFO_FW_ID       0xF0
  95#define E_INFO_OSR              0xD6
  96#define E_INFO_PHY_SCAN         0xD7
  97#define E_INFO_PHY_DRIVER       0xD8
  98
  99#define MAX_RETRIES             3
 100#define MAX_FW_UPDATE_RETRIES   30
 101
 102#define ELAN_FW_PAGESIZE        132
 103
 104/* calibration timeout definition */
 105#define ELAN_CALI_TIMEOUT_MSEC  12000
 106
 107#define ELAN_POWERON_DELAY_USEC 500
 108#define ELAN_RESET_DELAY_MSEC   20
 109
 110enum elants_state {
 111        ELAN_STATE_NORMAL,
 112        ELAN_WAIT_QUEUE_HEADER,
 113        ELAN_WAIT_RECALIBRATION,
 114};
 115
 116enum elants_iap_mode {
 117        ELAN_IAP_OPERATIONAL,
 118        ELAN_IAP_RECOVERY,
 119};
 120
 121/* struct elants_data - represents state of Elan touchscreen device */
 122struct elants_data {
 123        struct i2c_client *client;
 124        struct input_dev *input;
 125
 126        struct regulator *vcc33;
 127        struct regulator *vccio;
 128        struct gpio_desc *reset_gpio;
 129
 130        u16 fw_version;
 131        u8 test_version;
 132        u8 solution_version;
 133        u8 bc_version;
 134        u8 iap_version;
 135        u16 hw_version;
 136        unsigned int x_res;     /* resolution in units/mm */
 137        unsigned int y_res;
 138        unsigned int x_max;
 139        unsigned int y_max;
 140
 141        enum elants_state state;
 142        enum elants_iap_mode iap_mode;
 143
 144        /* Guards against concurrent access to the device via sysfs */
 145        struct mutex sysfs_mutex;
 146
 147        u8 cmd_resp[HEADER_SIZE];
 148        struct completion cmd_done;
 149
 150        u8 buf[MAX_PACKET_SIZE];
 151
 152        bool wake_irq_enabled;
 153        bool keep_power_in_suspend;
 154};
 155
 156static int elants_i2c_send(struct i2c_client *client,
 157                           const void *data, size_t size)
 158{
 159        int ret;
 160
 161        ret = i2c_master_send(client, data, size);
 162        if (ret == size)
 163                return 0;
 164
 165        if (ret >= 0)
 166                ret = -EIO;
 167
 168        dev_err(&client->dev, "%s failed (%*ph): %d\n",
 169                __func__, (int)size, data, ret);
 170
 171        return ret;
 172}
 173
 174static int elants_i2c_read(struct i2c_client *client, void *data, size_t size)
 175{
 176        int ret;
 177
 178        ret = i2c_master_recv(client, data, size);
 179        if (ret == size)
 180                return 0;
 181
 182        if (ret >= 0)
 183                ret = -EIO;
 184
 185        dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
 186
 187        return ret;
 188}
 189
 190static int elants_i2c_execute_command(struct i2c_client *client,
 191                                      const u8 *cmd, size_t cmd_size,
 192                                      u8 *resp, size_t resp_size)
 193{
 194        struct i2c_msg msgs[2];
 195        int ret;
 196        u8 expected_response;
 197
 198        switch (cmd[0]) {
 199        case CMD_HEADER_READ:
 200                expected_response = CMD_HEADER_RESP;
 201                break;
 202
 203        case CMD_HEADER_6B_READ:
 204                expected_response = CMD_HEADER_6B_RESP;
 205                break;
 206
 207        default:
 208                dev_err(&client->dev, "%s: invalid command %*ph\n",
 209                        __func__, (int)cmd_size, cmd);
 210                return -EINVAL;
 211        }
 212
 213        msgs[0].addr = client->addr;
 214        msgs[0].flags = client->flags & I2C_M_TEN;
 215        msgs[0].len = cmd_size;
 216        msgs[0].buf = (u8 *)cmd;
 217
 218        msgs[1].addr = client->addr;
 219        msgs[1].flags = client->flags & I2C_M_TEN;
 220        msgs[1].flags |= I2C_M_RD;
 221        msgs[1].len = resp_size;
 222        msgs[1].buf = resp;
 223
 224        ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 225        if (ret < 0)
 226                return ret;
 227
 228        if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response)
 229                return -EIO;
 230
 231        return 0;
 232}
 233
 234static int elants_i2c_calibrate(struct elants_data *ts)
 235{
 236        struct i2c_client *client = ts->client;
 237        int ret, error;
 238        static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
 239        static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
 240        static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };
 241
 242        disable_irq(client->irq);
 243
 244        ts->state = ELAN_WAIT_RECALIBRATION;
 245        reinit_completion(&ts->cmd_done);
 246
 247        elants_i2c_send(client, w_flashkey, sizeof(w_flashkey));
 248        elants_i2c_send(client, rek, sizeof(rek));
 249
 250        enable_irq(client->irq);
 251
 252        ret = wait_for_completion_interruptible_timeout(&ts->cmd_done,
 253                                msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC));
 254
 255        ts->state = ELAN_STATE_NORMAL;
 256
 257        if (ret <= 0) {
 258                error = ret < 0 ? ret : -ETIMEDOUT;
 259                dev_err(&client->dev,
 260                        "error while waiting for calibration to complete: %d\n",
 261                        error);
 262                return error;
 263        }
 264
 265        if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) {
 266                dev_err(&client->dev,
 267                        "unexpected calibration response: %*ph\n",
 268                        (int)sizeof(ts->cmd_resp), ts->cmd_resp);
 269                return -EINVAL;
 270        }
 271
 272        return 0;
 273}
 274
 275static int elants_i2c_sw_reset(struct i2c_client *client)
 276{
 277        const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 };
 278        int error;
 279
 280        error = elants_i2c_send(client, soft_rst_cmd,
 281                                sizeof(soft_rst_cmd));
 282        if (error) {
 283                dev_err(&client->dev, "software reset failed: %d\n", error);
 284                return error;
 285        }
 286
 287        /*
 288         * We should wait at least 10 msec (but no more than 40) before
 289         * sending fastboot or IAP command to the device.
 290         */
 291        msleep(30);
 292
 293        return 0;
 294}
 295
 296static u16 elants_i2c_parse_version(u8 *buf)
 297{
 298        return get_unaligned_be32(buf) >> 4;
 299}
 300
 301static int elants_i2c_query_fw_id(struct elants_data *ts)
 302{
 303        struct i2c_client *client = ts->client;
 304        int error, retry_cnt;
 305        const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 };
 306        u8 resp[HEADER_SIZE];
 307
 308        for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 309                error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
 310                                                   resp, sizeof(resp));
 311                if (!error) {
 312                        ts->hw_version = elants_i2c_parse_version(resp);
 313                        if (ts->hw_version != 0xffff)
 314                                return 0;
 315                }
 316
 317                dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n",
 318                        error, (int)sizeof(resp), resp);
 319        }
 320
 321        dev_err(&client->dev,
 322                "Failed to read fw id or fw id is invalid\n");
 323
 324        return -EINVAL;
 325}
 326
 327static int elants_i2c_query_fw_version(struct elants_data *ts)
 328{
 329        struct i2c_client *client = ts->client;
 330        int error, retry_cnt;
 331        const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 };
 332        u8 resp[HEADER_SIZE];
 333
 334        for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 335                error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
 336                                                   resp, sizeof(resp));
 337                if (!error) {
 338                        ts->fw_version = elants_i2c_parse_version(resp);
 339                        if (ts->fw_version != 0x0000 &&
 340                            ts->fw_version != 0xffff)
 341                                return 0;
 342                }
 343
 344                dev_dbg(&client->dev, "read fw version error=%d, buf=%*phC\n",
 345                        error, (int)sizeof(resp), resp);
 346        }
 347
 348        dev_err(&client->dev,
 349                "Failed to read fw version or fw version is invalid\n");
 350
 351        return -EINVAL;
 352}
 353
 354static int elants_i2c_query_test_version(struct elants_data *ts)
 355{
 356        struct i2c_client *client = ts->client;
 357        int error, retry_cnt;
 358        u16 version;
 359        const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 };
 360        u8 resp[HEADER_SIZE];
 361
 362        for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 363                error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
 364                                                   resp, sizeof(resp));
 365                if (!error) {
 366                        version = elants_i2c_parse_version(resp);
 367                        ts->test_version = version >> 8;
 368                        ts->solution_version = version & 0xff;
 369
 370                        return 0;
 371                }
 372
 373                dev_dbg(&client->dev,
 374                        "read test version error rc=%d, buf=%*phC\n",
 375                        error, (int)sizeof(resp), resp);
 376        }
 377
 378        dev_err(&client->dev, "Failed to read test version\n");
 379
 380        return -EINVAL;
 381}
 382
 383static int elants_i2c_query_bc_version(struct elants_data *ts)
 384{
 385        struct i2c_client *client = ts->client;
 386        const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 };
 387        u8 resp[HEADER_SIZE];
 388        u16 version;
 389        int error;
 390
 391        error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
 392                                           resp, sizeof(resp));
 393        if (error) {
 394                dev_err(&client->dev,
 395                        "read BC version error=%d, buf=%*phC\n",
 396                        error, (int)sizeof(resp), resp);
 397                return error;
 398        }
 399
 400        version = elants_i2c_parse_version(resp);
 401        ts->bc_version = version >> 8;
 402        ts->iap_version = version & 0xff;
 403
 404        return 0;
 405}
 406
 407static int elants_i2c_query_ts_info(struct elants_data *ts)
 408{
 409        struct i2c_client *client = ts->client;
 410        int error;
 411        u8 resp[17];
 412        u16 phy_x, phy_y, rows, cols, osr;
 413        const u8 get_resolution_cmd[] = {
 414                CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00
 415        };
 416        const u8 get_osr_cmd[] = {
 417                CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01
 418        };
 419        const u8 get_physical_scan_cmd[] = {
 420                CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01
 421        };
 422        const u8 get_physical_drive_cmd[] = {
 423                CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01
 424        };
 425
 426        /* Get trace number */
 427        error = elants_i2c_execute_command(client,
 428                                           get_resolution_cmd,
 429                                           sizeof(get_resolution_cmd),
 430                                           resp, sizeof(resp));
 431        if (error) {
 432                dev_err(&client->dev, "get resolution command failed: %d\n",
 433                        error);
 434                return error;
 435        }
 436
 437        rows = resp[2] + resp[6] + resp[10];
 438        cols = resp[3] + resp[7] + resp[11];
 439
 440        /* Process mm_to_pixel information */
 441        error = elants_i2c_execute_command(client,
 442                                           get_osr_cmd, sizeof(get_osr_cmd),
 443                                           resp, sizeof(resp));
 444        if (error) {
 445                dev_err(&client->dev, "get osr command failed: %d\n",
 446                        error);
 447                return error;
 448        }
 449
 450        osr = resp[3];
 451
 452        error = elants_i2c_execute_command(client,
 453                                           get_physical_scan_cmd,
 454                                           sizeof(get_physical_scan_cmd),
 455                                           resp, sizeof(resp));
 456        if (error) {
 457                dev_err(&client->dev, "get physical scan command failed: %d\n",
 458                        error);
 459                return error;
 460        }
 461
 462        phy_x = get_unaligned_be16(&resp[2]);
 463
 464        error = elants_i2c_execute_command(client,
 465                                           get_physical_drive_cmd,
 466                                           sizeof(get_physical_drive_cmd),
 467                                           resp, sizeof(resp));
 468        if (error) {
 469                dev_err(&client->dev, "get physical drive command failed: %d\n",
 470                        error);
 471                return error;
 472        }
 473
 474        phy_y = get_unaligned_be16(&resp[2]);
 475
 476        dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
 477
 478        if (rows == 0 || cols == 0 || osr == 0) {
 479                dev_warn(&client->dev,
 480                         "invalid trace number data: %d, %d, %d\n",
 481                         rows, cols, osr);
 482        } else {
 483                /* translate trace number to TS resolution */
 484                ts->x_max = ELAN_TS_RESOLUTION(rows, osr);
 485                ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x);
 486                ts->y_max = ELAN_TS_RESOLUTION(cols, osr);
 487                ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y);
 488        }
 489
 490        return 0;
 491}
 492
 493static int elants_i2c_fastboot(struct i2c_client *client)
 494{
 495        const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E };
 496        int error;
 497
 498        error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd));
 499        if (error) {
 500                dev_err(&client->dev, "boot failed: %d\n", error);
 501                return error;
 502        }
 503
 504        dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr);
 505        return 0;
 506}
 507
 508static int elants_i2c_initialize(struct elants_data *ts)
 509{
 510        struct i2c_client *client = ts->client;
 511        int error, retry_cnt;
 512        const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 };
 513        const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 };
 514        u8 buf[HEADER_SIZE];
 515
 516        for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 517                error = elants_i2c_sw_reset(client);
 518                if (error) {
 519                        /* Continue initializing if it's the last try */
 520                        if (retry_cnt < MAX_RETRIES - 1)
 521                                continue;
 522                }
 523
 524                error = elants_i2c_fastboot(client);
 525                if (error) {
 526                        /* Continue initializing if it's the last try */
 527                        if (retry_cnt < MAX_RETRIES - 1)
 528                                continue;
 529                }
 530
 531                /* Wait for Hello packet */
 532                msleep(BOOT_TIME_DELAY_MS);
 533
 534                error = elants_i2c_read(client, buf, sizeof(buf));
 535                if (error) {
 536                        dev_err(&client->dev,
 537                                "failed to read 'hello' packet: %d\n", error);
 538                } else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) {
 539                        ts->iap_mode = ELAN_IAP_OPERATIONAL;
 540                        break;
 541                } else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) {
 542                        /*
 543                         * Setting error code will mark device
 544                         * in recovery mode below.
 545                         */
 546                        error = -EIO;
 547                        break;
 548                } else {
 549                        error = -EINVAL;
 550                        dev_err(&client->dev,
 551                                "invalid 'hello' packet: %*ph\n",
 552                                (int)sizeof(buf), buf);
 553                }
 554        }
 555
 556        if (!error)
 557                error = elants_i2c_query_fw_id(ts);
 558        if (!error)
 559                error = elants_i2c_query_fw_version(ts);
 560
 561        if (error) {
 562                ts->iap_mode = ELAN_IAP_RECOVERY;
 563        } else {
 564                elants_i2c_query_test_version(ts);
 565                elants_i2c_query_bc_version(ts);
 566                elants_i2c_query_ts_info(ts);
 567        }
 568
 569        return 0;
 570}
 571
 572/*
 573 * Firmware update interface.
 574 */
 575
 576static int elants_i2c_fw_write_page(struct i2c_client *client,
 577                                    const void *page)
 578{
 579        const u8 ack_ok[] = { 0xaa, 0xaa };
 580        u8 buf[2];
 581        int retry;
 582        int error;
 583
 584        for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) {
 585                error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE);
 586                if (error) {
 587                        dev_err(&client->dev,
 588                                "IAP Write Page failed: %d\n", error);
 589                        continue;
 590                }
 591
 592                error = elants_i2c_read(client, buf, 2);
 593                if (error) {
 594                        dev_err(&client->dev,
 595                                "IAP Ack read failed: %d\n", error);
 596                        return error;
 597                }
 598
 599                if (!memcmp(buf, ack_ok, sizeof(ack_ok)))
 600                        return 0;
 601
 602                error = -EIO;
 603                dev_err(&client->dev,
 604                        "IAP Get Ack Error [%02x:%02x]\n",
 605                        buf[0], buf[1]);
 606        }
 607
 608        return error;
 609}
 610
 611static int elants_i2c_do_update_firmware(struct i2c_client *client,
 612                                         const struct firmware *fw,
 613                                         bool force)
 614{
 615        const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
 616        const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
 617        const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
 618        const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
 619        u8 buf[HEADER_SIZE];
 620        u16 send_id;
 621        int page, n_fw_pages;
 622        int error;
 623
 624        /* Recovery mode detection! */
 625        if (force) {
 626                dev_dbg(&client->dev, "Recovery mode procedure\n");
 627                error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
 628        } else {
 629                /* Start IAP Procedure */
 630                dev_dbg(&client->dev, "Normal IAP procedure\n");
 631                /* Close idle mode */
 632                error = elants_i2c_send(client, close_idle, sizeof(close_idle));
 633                if (error)
 634                        dev_err(&client->dev, "Failed close idle: %d\n", error);
 635                msleep(60);
 636                elants_i2c_sw_reset(client);
 637                msleep(20);
 638                error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
 639        }
 640
 641        if (error) {
 642                dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
 643                return error;
 644        }
 645
 646        msleep(20);
 647
 648        /* check IAP state */
 649        error = elants_i2c_read(client, buf, 4);
 650        if (error) {
 651                dev_err(&client->dev,
 652                        "failed to read IAP acknowledgement: %d\n",
 653                        error);
 654                return error;
 655        }
 656
 657        if (memcmp(buf, iap_ack, sizeof(iap_ack))) {
 658                dev_err(&client->dev,
 659                        "failed to enter IAP: %*ph (expected %*ph)\n",
 660                        (int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack);
 661                return -EIO;
 662        }
 663
 664        dev_info(&client->dev, "successfully entered IAP mode");
 665
 666        send_id = client->addr;
 667        error = elants_i2c_send(client, &send_id, 1);
 668        if (error) {
 669                dev_err(&client->dev, "sending dummy byte failed: %d\n",
 670                        error);
 671                return error;
 672        }
 673
 674        /* Clear the last page of Master */
 675        error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE);
 676        if (error) {
 677                dev_err(&client->dev, "clearing of the last page failed: %d\n",
 678                        error);
 679                return error;
 680        }
 681
 682        error = elants_i2c_read(client, buf, 2);
 683        if (error) {
 684                dev_err(&client->dev,
 685                        "failed to read ACK for clearing the last page: %d\n",
 686                        error);
 687                return error;
 688        }
 689
 690        n_fw_pages = fw->size / ELAN_FW_PAGESIZE;
 691        dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages);
 692
 693        for (page = 0; page < n_fw_pages; page++) {
 694                error = elants_i2c_fw_write_page(client,
 695                                        fw->data + page * ELAN_FW_PAGESIZE);
 696                if (error) {
 697                        dev_err(&client->dev,
 698                                "failed to write FW page %d: %d\n",
 699                                page, error);
 700                        return error;
 701                }
 702        }
 703
 704        /* Old iap needs to wait 200ms for WDT and rest is for hello packets */
 705        msleep(300);
 706
 707        dev_info(&client->dev, "firmware update completed\n");
 708        return 0;
 709}
 710
 711static int elants_i2c_fw_update(struct elants_data *ts)
 712{
 713        struct i2c_client *client = ts->client;
 714        const struct firmware *fw;
 715        char *fw_name;
 716        int error;
 717
 718        fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version);
 719        if (!fw_name)
 720                return -ENOMEM;
 721
 722        dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
 723        error = request_firmware(&fw, fw_name, &client->dev);
 724        kfree(fw_name);
 725        if (error) {
 726                dev_err(&client->dev, "failed to request firmware: %d\n",
 727                        error);
 728                return error;
 729        }
 730
 731        if (fw->size % ELAN_FW_PAGESIZE) {
 732                dev_err(&client->dev, "invalid firmware length: %zu\n",
 733                        fw->size);
 734                error = -EINVAL;
 735                goto out;
 736        }
 737
 738        disable_irq(client->irq);
 739
 740        error = elants_i2c_do_update_firmware(client, fw,
 741                                        ts->iap_mode == ELAN_IAP_RECOVERY);
 742        if (error) {
 743                dev_err(&client->dev, "firmware update failed: %d\n", error);
 744                ts->iap_mode = ELAN_IAP_RECOVERY;
 745                goto out_enable_irq;
 746        }
 747
 748        error = elants_i2c_initialize(ts);
 749        if (error) {
 750                dev_err(&client->dev,
 751                        "failed to initialize device after firmware update: %d\n",
 752                        error);
 753                ts->iap_mode = ELAN_IAP_RECOVERY;
 754                goto out_enable_irq;
 755        }
 756
 757        ts->iap_mode = ELAN_IAP_OPERATIONAL;
 758
 759out_enable_irq:
 760        ts->state = ELAN_STATE_NORMAL;
 761        enable_irq(client->irq);
 762        msleep(100);
 763
 764        if (!error)
 765                elants_i2c_calibrate(ts);
 766out:
 767        release_firmware(fw);
 768        return error;
 769}
 770
 771/*
 772 * Event reporting.
 773 */
 774
 775static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 776{
 777        struct input_dev *input = ts->input;
 778        unsigned int n_fingers;
 779        u16 finger_state;
 780        int i;
 781
 782        n_fingers = buf[FW_POS_STATE + 1] & 0x0f;
 783        finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) |
 784                        buf[FW_POS_STATE];
 785
 786        dev_dbg(&ts->client->dev,
 787                "n_fingers: %u, state: %04x\n",  n_fingers, finger_state);
 788
 789        for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
 790                if (finger_state & 1) {
 791                        unsigned int x, y, p, w;
 792                        u8 *pos;
 793
 794                        pos = &buf[FW_POS_XY + i * 3];
 795                        x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
 796                        y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
 797                        p = buf[FW_POS_PRESSURE + i];
 798                        w = buf[FW_POS_WIDTH + i];
 799
 800                        dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
 801                                i, x, y, p, w);
 802
 803                        input_mt_slot(input, i);
 804                        input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
 805                        input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
 806                        input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
 807                        input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
 808                        input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w);
 809
 810                        n_fingers--;
 811                }
 812
 813                finger_state >>= 1;
 814        }
 815
 816        input_mt_sync_frame(input);
 817        input_sync(input);
 818}
 819
 820static u8 elants_i2c_calculate_checksum(u8 *buf)
 821{
 822        u8 checksum = 0;
 823        u8 i;
 824
 825        for (i = 0; i < FW_POS_CHECKSUM; i++)
 826                checksum += buf[i];
 827
 828        return checksum;
 829}
 830
 831static void elants_i2c_event(struct elants_data *ts, u8 *buf)
 832{
 833        u8 checksum = elants_i2c_calculate_checksum(buf);
 834
 835        if (unlikely(buf[FW_POS_CHECKSUM] != checksum))
 836                dev_warn(&ts->client->dev,
 837                         "%s: invalid checksum for packet %02x: %02x vs. %02x\n",
 838                         __func__, buf[FW_POS_HEADER],
 839                         checksum, buf[FW_POS_CHECKSUM]);
 840        else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER))
 841                dev_warn(&ts->client->dev,
 842                         "%s: unknown packet type: %02x\n",
 843                         __func__, buf[FW_POS_HEADER]);
 844        else
 845                elants_i2c_mt_event(ts, buf);
 846}
 847
 848static irqreturn_t elants_i2c_irq(int irq, void *_dev)
 849{
 850        const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 };
 851        struct elants_data *ts = _dev;
 852        struct i2c_client *client = ts->client;
 853        int report_count, report_len;
 854        int i;
 855        int len;
 856
 857        len = i2c_master_recv(client, ts->buf, sizeof(ts->buf));
 858        if (len < 0) {
 859                dev_err(&client->dev, "%s: failed to read data: %d\n",
 860                        __func__, len);
 861                goto out;
 862        }
 863
 864        dev_dbg(&client->dev, "%s: packet %*ph\n",
 865                __func__, HEADER_SIZE, ts->buf);
 866
 867        switch (ts->state) {
 868        case ELAN_WAIT_RECALIBRATION:
 869                if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) {
 870                        memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp));
 871                        complete(&ts->cmd_done);
 872                        ts->state = ELAN_STATE_NORMAL;
 873                }
 874                break;
 875
 876        case ELAN_WAIT_QUEUE_HEADER:
 877                if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL)
 878                        break;
 879
 880                ts->state = ELAN_STATE_NORMAL;
 881                /* fall through */
 882
 883        case ELAN_STATE_NORMAL:
 884
 885                switch (ts->buf[FW_HDR_TYPE]) {
 886                case CMD_HEADER_HELLO:
 887                case CMD_HEADER_RESP:
 888                case CMD_HEADER_REK:
 889                        break;
 890
 891                case QUEUE_HEADER_WAIT:
 892                        if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) {
 893                                dev_err(&client->dev,
 894                                        "invalid wait packet %*ph\n",
 895                                        HEADER_SIZE, ts->buf);
 896                        } else {
 897                                ts->state = ELAN_WAIT_QUEUE_HEADER;
 898                                udelay(30);
 899                        }
 900                        break;
 901
 902                case QUEUE_HEADER_SINGLE:
 903                        elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
 904                        break;
 905
 906                case QUEUE_HEADER_NORMAL:
 907                        report_count = ts->buf[FW_HDR_COUNT];
 908                        if (report_count > 3) {
 909                                dev_err(&client->dev,
 910                                        "too large report count: %*ph\n",
 911                                        HEADER_SIZE, ts->buf);
 912                                break;
 913                        }
 914
 915                        report_len = ts->buf[FW_HDR_LENGTH] / report_count;
 916                        if (report_len != PACKET_SIZE) {
 917                                dev_err(&client->dev,
 918                                        "mismatching report length: %*ph\n",
 919                                        HEADER_SIZE, ts->buf);
 920                                break;
 921                        }
 922
 923                        for (i = 0; i < report_count; i++) {
 924                                u8 *buf = ts->buf + HEADER_SIZE +
 925                                                        i * PACKET_SIZE;
 926                                elants_i2c_event(ts, buf);
 927                        }
 928                        break;
 929
 930                default:
 931                        dev_err(&client->dev, "unknown packet %*ph\n",
 932                                HEADER_SIZE, ts->buf);
 933                        break;
 934                }
 935                break;
 936        }
 937
 938out:
 939        return IRQ_HANDLED;
 940}
 941
 942/*
 943 * sysfs interface
 944 */
 945static ssize_t calibrate_store(struct device *dev,
 946                               struct device_attribute *attr,
 947                              const char *buf, size_t count)
 948{
 949        struct i2c_client *client = to_i2c_client(dev);
 950        struct elants_data *ts = i2c_get_clientdata(client);
 951        int error;
 952
 953        error = mutex_lock_interruptible(&ts->sysfs_mutex);
 954        if (error)
 955                return error;
 956
 957        error = elants_i2c_calibrate(ts);
 958
 959        mutex_unlock(&ts->sysfs_mutex);
 960        return error ?: count;
 961}
 962
 963static ssize_t write_update_fw(struct device *dev,
 964                               struct device_attribute *attr,
 965                               const char *buf, size_t count)
 966{
 967        struct i2c_client *client = to_i2c_client(dev);
 968        struct elants_data *ts = i2c_get_clientdata(client);
 969        int error;
 970
 971        error = mutex_lock_interruptible(&ts->sysfs_mutex);
 972        if (error)
 973                return error;
 974
 975        error = elants_i2c_fw_update(ts);
 976        dev_dbg(dev, "firmware update result: %d\n", error);
 977
 978        mutex_unlock(&ts->sysfs_mutex);
 979        return error ?: count;
 980}
 981
 982static ssize_t show_iap_mode(struct device *dev,
 983                             struct device_attribute *attr, char *buf)
 984{
 985        struct i2c_client *client = to_i2c_client(dev);
 986        struct elants_data *ts = i2c_get_clientdata(client);
 987
 988        return sprintf(buf, "%s\n",
 989                       ts->iap_mode == ELAN_IAP_OPERATIONAL ?
 990                                "Normal" : "Recovery");
 991}
 992
 993static DEVICE_ATTR(calibrate, S_IWUSR, NULL, calibrate_store);
 994static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL);
 995static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw);
 996
 997struct elants_version_attribute {
 998        struct device_attribute dattr;
 999        size_t field_offset;
1000        size_t field_size;
1001};
1002
1003#define __ELANTS_FIELD_SIZE(_field)                                     \
1004        sizeof(((struct elants_data *)NULL)->_field)
1005#define __ELANTS_VERIFY_SIZE(_field)                                    \
1006        (BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) +           \
1007         __ELANTS_FIELD_SIZE(_field))
1008#define ELANTS_VERSION_ATTR(_field)                                     \
1009        struct elants_version_attribute elants_ver_attr_##_field = {    \
1010                .dattr = __ATTR(_field, S_IRUGO,                        \
1011                                elants_version_attribute_show, NULL),   \
1012                .field_offset = offsetof(struct elants_data, _field),   \
1013                .field_size = __ELANTS_VERIFY_SIZE(_field),             \
1014        }
1015
1016static ssize_t elants_version_attribute_show(struct device *dev,
1017                                             struct device_attribute *dattr,
1018                                             char *buf)
1019{
1020        struct i2c_client *client = to_i2c_client(dev);
1021        struct elants_data *ts = i2c_get_clientdata(client);
1022        struct elants_version_attribute *attr =
1023                container_of(dattr, struct elants_version_attribute, dattr);
1024        u8 *field = (u8 *)((char *)ts + attr->field_offset);
1025        unsigned int fmt_size;
1026        unsigned int val;
1027
1028        if (attr->field_size == 1) {
1029                val = *field;
1030                fmt_size = 2; /* 2 HEX digits */
1031        } else {
1032                val = *(u16 *)field;
1033                fmt_size = 4; /* 4 HEX digits */
1034        }
1035
1036        return sprintf(buf, "%0*x\n", fmt_size, val);
1037}
1038
1039static ELANTS_VERSION_ATTR(fw_version);
1040static ELANTS_VERSION_ATTR(hw_version);
1041static ELANTS_VERSION_ATTR(test_version);
1042static ELANTS_VERSION_ATTR(solution_version);
1043static ELANTS_VERSION_ATTR(bc_version);
1044static ELANTS_VERSION_ATTR(iap_version);
1045
1046static struct attribute *elants_attributes[] = {
1047        &dev_attr_calibrate.attr,
1048        &dev_attr_update_fw.attr,
1049        &dev_attr_iap_mode.attr,
1050
1051        &elants_ver_attr_fw_version.dattr.attr,
1052        &elants_ver_attr_hw_version.dattr.attr,
1053        &elants_ver_attr_test_version.dattr.attr,
1054        &elants_ver_attr_solution_version.dattr.attr,
1055        &elants_ver_attr_bc_version.dattr.attr,
1056        &elants_ver_attr_iap_version.dattr.attr,
1057        NULL
1058};
1059
1060static struct attribute_group elants_attribute_group = {
1061        .attrs = elants_attributes,
1062};
1063
1064static void elants_i2c_remove_sysfs_group(void *_data)
1065{
1066        struct elants_data *ts = _data;
1067
1068        sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group);
1069}
1070
1071static int elants_i2c_power_on(struct elants_data *ts)
1072{
1073        int error;
1074
1075        /*
1076         * If we do not have reset gpio assume platform firmware
1077         * controls regulators and does power them on for us.
1078         */
1079        if (IS_ERR_OR_NULL(ts->reset_gpio))
1080                return 0;
1081
1082        gpiod_set_value_cansleep(ts->reset_gpio, 1);
1083
1084        error = regulator_enable(ts->vcc33);
1085        if (error) {
1086                dev_err(&ts->client->dev,
1087                        "failed to enable vcc33 regulator: %d\n",
1088                        error);
1089                goto release_reset_gpio;
1090        }
1091
1092        error = regulator_enable(ts->vccio);
1093        if (error) {
1094                dev_err(&ts->client->dev,
1095                        "failed to enable vccio regulator: %d\n",
1096                        error);
1097                regulator_disable(ts->vcc33);
1098                goto release_reset_gpio;
1099        }
1100
1101        /*
1102         * We need to wait a bit after powering on controller before
1103         * we are allowed to release reset GPIO.
1104         */
1105        udelay(ELAN_POWERON_DELAY_USEC);
1106
1107release_reset_gpio:
1108        gpiod_set_value_cansleep(ts->reset_gpio, 0);
1109        if (error)
1110                return error;
1111
1112        msleep(ELAN_RESET_DELAY_MSEC);
1113
1114        return 0;
1115}
1116
1117static void elants_i2c_power_off(void *_data)
1118{
1119        struct elants_data *ts = _data;
1120
1121        if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
1122                /*
1123                 * Activate reset gpio to prevent leakage through the
1124                 * pin once we shut off power to the controller.
1125                 */
1126                gpiod_set_value_cansleep(ts->reset_gpio, 1);
1127                regulator_disable(ts->vccio);
1128                regulator_disable(ts->vcc33);
1129        }
1130}
1131
1132static int elants_i2c_probe(struct i2c_client *client,
1133                            const struct i2c_device_id *id)
1134{
1135        union i2c_smbus_data dummy;
1136        struct elants_data *ts;
1137        unsigned long irqflags;
1138        int error;
1139
1140        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
1141                dev_err(&client->dev,
1142                        "%s: i2c check functionality error\n", DEVICE_NAME);
1143                return -ENXIO;
1144        }
1145
1146        ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL);
1147        if (!ts)
1148                return -ENOMEM;
1149
1150        mutex_init(&ts->sysfs_mutex);
1151        init_completion(&ts->cmd_done);
1152
1153        ts->client = client;
1154        i2c_set_clientdata(client, ts);
1155
1156        ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
1157        if (IS_ERR(ts->vcc33)) {
1158                error = PTR_ERR(ts->vcc33);
1159                if (error != -EPROBE_DEFER)
1160                        dev_err(&client->dev,
1161                                "Failed to get 'vcc33' regulator: %d\n",
1162                                error);
1163                return error;
1164        }
1165
1166        ts->vccio = devm_regulator_get(&client->dev, "vccio");
1167        if (IS_ERR(ts->vccio)) {
1168                error = PTR_ERR(ts->vccio);
1169                if (error != -EPROBE_DEFER)
1170                        dev_err(&client->dev,
1171                                "Failed to get 'vccio' regulator: %d\n",
1172                                error);
1173                return error;
1174        }
1175
1176        ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
1177        if (IS_ERR(ts->reset_gpio)) {
1178                error = PTR_ERR(ts->reset_gpio);
1179
1180                if (error == -EPROBE_DEFER)
1181                        return error;
1182
1183                if (error != -ENOENT && error != -ENOSYS) {
1184                        dev_err(&client->dev,
1185                                "failed to get reset gpio: %d\n",
1186                                error);
1187                        return error;
1188                }
1189
1190                ts->keep_power_in_suspend = true;
1191        }
1192
1193        error = elants_i2c_power_on(ts);
1194        if (error)
1195                return error;
1196
1197        error = devm_add_action(&client->dev, elants_i2c_power_off, ts);
1198        if (error) {
1199                dev_err(&client->dev,
1200                        "failed to install power off action: %d\n", error);
1201                elants_i2c_power_off(ts);
1202                return error;
1203        }
1204
1205        /* Make sure there is something at this address */
1206        if (i2c_smbus_xfer(client->adapter, client->addr, 0,
1207                           I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
1208                dev_err(&client->dev, "nothing at this address\n");
1209                return -ENXIO;
1210        }
1211
1212        error = elants_i2c_initialize(ts);
1213        if (error) {
1214                dev_err(&client->dev, "failed to initialize: %d\n", error);
1215                return error;
1216        }
1217
1218        ts->input = devm_input_allocate_device(&client->dev);
1219        if (!ts->input) {
1220                dev_err(&client->dev, "Failed to allocate input device\n");
1221                return -ENOMEM;
1222        }
1223
1224        ts->input->name = "Elan Touchscreen";
1225        ts->input->id.bustype = BUS_I2C;
1226
1227        __set_bit(BTN_TOUCH, ts->input->keybit);
1228        __set_bit(EV_ABS, ts->input->evbit);
1229        __set_bit(EV_KEY, ts->input->evbit);
1230
1231        /* Single touch input params setup */
1232        input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
1233        input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
1234        input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
1235        input_abs_set_res(ts->input, ABS_X, ts->x_res);
1236        input_abs_set_res(ts->input, ABS_Y, ts->y_res);
1237
1238        /* Multitouch input params setup */
1239        error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
1240                                    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
1241        if (error) {
1242                dev_err(&client->dev,
1243                        "failed to initialize MT slots: %d\n", error);
1244                return error;
1245        }
1246
1247        input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
1248        input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
1249        input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
1250        input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
1251        input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
1252        input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
1253
1254        input_set_drvdata(ts->input, ts);
1255
1256        error = input_register_device(ts->input);
1257        if (error) {
1258                dev_err(&client->dev,
1259                        "unable to register input device: %d\n", error);
1260                return error;
1261        }
1262
1263        /*
1264         * Systems using device tree should set up interrupt via DTS,
1265         * the rest will use the default falling edge interrupts.
1266         */
1267        irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING;
1268
1269        error = devm_request_threaded_irq(&client->dev, client->irq,
1270                                          NULL, elants_i2c_irq,
1271                                          irqflags | IRQF_ONESHOT,
1272                                          client->name, ts);
1273        if (error) {
1274                dev_err(&client->dev, "Failed to register interrupt\n");
1275                return error;
1276        }
1277
1278        /*
1279         * Systems using device tree should set up wakeup via DTS,
1280         * the rest will configure device as wakeup source by default.
1281         */
1282        if (!client->dev.of_node)
1283                device_init_wakeup(&client->dev, true);
1284
1285        error = sysfs_create_group(&client->dev.kobj, &elants_attribute_group);
1286        if (error) {
1287                dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
1288                        error);
1289                return error;
1290        }
1291
1292        error = devm_add_action(&client->dev,
1293                                elants_i2c_remove_sysfs_group, ts);
1294        if (error) {
1295                elants_i2c_remove_sysfs_group(ts);
1296                dev_err(&client->dev,
1297                        "Failed to add sysfs cleanup action: %d\n",
1298                        error);
1299                return error;
1300        }
1301
1302        return 0;
1303}
1304
1305static int __maybe_unused elants_i2c_suspend(struct device *dev)
1306{
1307        struct i2c_client *client = to_i2c_client(dev);
1308        struct elants_data *ts = i2c_get_clientdata(client);
1309        const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
1310        int retry_cnt;
1311        int error;
1312
1313        /* Command not support in IAP recovery mode */
1314        if (ts->iap_mode != ELAN_IAP_OPERATIONAL)
1315                return -EBUSY;
1316
1317        disable_irq(client->irq);
1318
1319        if (device_may_wakeup(dev)) {
1320                /*
1321                 * The device will automatically enter idle mode
1322                 * that has reduced power consumption.
1323                 */
1324                ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
1325        } else if (ts->keep_power_in_suspend) {
1326                for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
1327                        error = elants_i2c_send(client, set_sleep_cmd,
1328                                                sizeof(set_sleep_cmd));
1329                        if (!error)
1330                                break;
1331
1332                        dev_err(&client->dev,
1333                                "suspend command failed: %d\n", error);
1334                }
1335        } else {
1336                elants_i2c_power_off(ts);
1337        }
1338
1339        return 0;
1340}
1341
1342static int __maybe_unused elants_i2c_resume(struct device *dev)
1343{
1344        struct i2c_client *client = to_i2c_client(dev);
1345        struct elants_data *ts = i2c_get_clientdata(client);
1346        const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
1347        int retry_cnt;
1348        int error;
1349
1350        if (device_may_wakeup(dev)) {
1351                if (ts->wake_irq_enabled)
1352                        disable_irq_wake(client->irq);
1353                elants_i2c_sw_reset(client);
1354        } else if (ts->keep_power_in_suspend) {
1355                for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
1356                        error = elants_i2c_send(client, set_active_cmd,
1357                                                sizeof(set_active_cmd));
1358                        if (!error)
1359                                break;
1360
1361                        dev_err(&client->dev,
1362                                "resume command failed: %d\n", error);
1363                }
1364        } else {
1365                elants_i2c_power_on(ts);
1366                elants_i2c_initialize(ts);
1367        }
1368
1369        ts->state = ELAN_STATE_NORMAL;
1370        enable_irq(client->irq);
1371
1372        return 0;
1373}
1374
1375static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops,
1376                         elants_i2c_suspend, elants_i2c_resume);
1377
1378static const struct i2c_device_id elants_i2c_id[] = {
1379        { DEVICE_NAME, 0 },
1380        { }
1381};
1382MODULE_DEVICE_TABLE(i2c, elants_i2c_id);
1383
1384#ifdef CONFIG_ACPI
1385static const struct acpi_device_id elants_acpi_id[] = {
1386        { "ELAN0001", 0 },
1387        { }
1388};
1389MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
1390#endif
1391
1392#ifdef CONFIG_OF
1393static const struct of_device_id elants_of_match[] = {
1394        { .compatible = "elan,ekth3500" },
1395        { /* sentinel */ }
1396};
1397MODULE_DEVICE_TABLE(of, elants_of_match);
1398#endif
1399
1400static struct i2c_driver elants_i2c_driver = {
1401        .probe = elants_i2c_probe,
1402        .id_table = elants_i2c_id,
1403        .driver = {
1404                .name = DEVICE_NAME,
1405                .pm = &elants_i2c_pm_ops,
1406                .acpi_match_table = ACPI_PTR(elants_acpi_id),
1407                .of_match_table = of_match_ptr(elants_of_match),
1408                .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1409        },
1410};
1411module_i2c_driver(elants_i2c_driver);
1412
1413MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>");
1414MODULE_DESCRIPTION("Elan I2c Touchscreen driver");
1415MODULE_VERSION(DRV_VERSION);
1416MODULE_LICENSE("GPL");
1417