linux/drivers/macintosh/via-pmu.c
<<
>>
Prefs
   1/*
   2 * Device driver for the via-pmu on Apple Powermacs.
   3 *
   4 * The VIA (versatile interface adapter) interfaces to the PMU,
   5 * a 6805 microprocessor core whose primary function is to control
   6 * battery charging and system power on the PowerBook 3400 and 2400.
   7 * The PMU also controls the ADB (Apple Desktop Bus) which connects
   8 * to the keyboard and mouse, as well as the non-volatile RAM
   9 * and the RTC (real time clock) chip.
  10 *
  11 * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
  12 * Copyright (C) 2001-2002 Benjamin Herrenschmidt
  13 * Copyright (C) 2006-2007 Johannes Berg
  14 *
  15 * THIS DRIVER IS BECOMING A TOTAL MESS !
  16 *  - Cleanup atomically disabling reply to PMU events after
  17 *    a sleep or a freq. switch
  18 *
  19 */
  20#include <stdarg.h>
  21#include <linux/mutex.h>
  22#include <linux/types.h>
  23#include <linux/errno.h>
  24#include <linux/kernel.h>
  25#include <linux/delay.h>
  26#include <linux/sched.h>
  27#include <linux/miscdevice.h>
  28#include <linux/blkdev.h>
  29#include <linux/pci.h>
  30#include <linux/slab.h>
  31#include <linux/poll.h>
  32#include <linux/adb.h>
  33#include <linux/pmu.h>
  34#include <linux/cuda.h>
  35#include <linux/module.h>
  36#include <linux/spinlock.h>
  37#include <linux/pm.h>
  38#include <linux/proc_fs.h>
  39#include <linux/seq_file.h>
  40#include <linux/init.h>
  41#include <linux/interrupt.h>
  42#include <linux/device.h>
  43#include <linux/syscore_ops.h>
  44#include <linux/freezer.h>
  45#include <linux/syscalls.h>
  46#include <linux/suspend.h>
  47#include <linux/cpu.h>
  48#include <linux/compat.h>
  49#include <linux/of_address.h>
  50#include <linux/of_irq.h>
  51#include <asm/prom.h>
  52#include <asm/machdep.h>
  53#include <asm/io.h>
  54#include <asm/pgtable.h>
  55#include <asm/sections.h>
  56#include <asm/irq.h>
  57#include <asm/pmac_feature.h>
  58#include <asm/pmac_pfunc.h>
  59#include <asm/pmac_low_i2c.h>
  60#include <asm/uaccess.h>
  61#include <asm/mmu_context.h>
  62#include <asm/cputable.h>
  63#include <asm/time.h>
  64#include <asm/backlight.h>
  65
  66#include "via-pmu-event.h"
  67
  68/* Some compile options */
  69#undef DEBUG_SLEEP
  70
  71/* Misc minor number allocated for /dev/pmu */
  72#define PMU_MINOR               154
  73
  74/* How many iterations between battery polls */
  75#define BATTERY_POLLING_COUNT   2
  76
  77static DEFINE_MUTEX(pmu_info_proc_mutex);
  78static volatile unsigned char __iomem *via;
  79
  80/* VIA registers - spaced 0x200 bytes apart */
  81#define RS              0x200           /* skip between registers */
  82#define B               0               /* B-side data */
  83#define A               RS              /* A-side data */
  84#define DIRB            (2*RS)          /* B-side direction (1=output) */
  85#define DIRA            (3*RS)          /* A-side direction (1=output) */
  86#define T1CL            (4*RS)          /* Timer 1 ctr/latch (low 8 bits) */
  87#define T1CH            (5*RS)          /* Timer 1 counter (high 8 bits) */
  88#define T1LL            (6*RS)          /* Timer 1 latch (low 8 bits) */
  89#define T1LH            (7*RS)          /* Timer 1 latch (high 8 bits) */
  90#define T2CL            (8*RS)          /* Timer 2 ctr/latch (low 8 bits) */
  91#define T2CH            (9*RS)          /* Timer 2 counter (high 8 bits) */
  92#define SR              (10*RS)         /* Shift register */
  93#define ACR             (11*RS)         /* Auxiliary control register */
  94#define PCR             (12*RS)         /* Peripheral control register */
  95#define IFR             (13*RS)         /* Interrupt flag register */
  96#define IER             (14*RS)         /* Interrupt enable register */
  97#define ANH             (15*RS)         /* A-side data, no handshake */
  98
  99/* Bits in B data register: both active low */
 100#define TACK            0x08            /* Transfer acknowledge (input) */
 101#define TREQ            0x10            /* Transfer request (output) */
 102
 103/* Bits in ACR */
 104#define SR_CTRL         0x1c            /* Shift register control bits */
 105#define SR_EXT          0x0c            /* Shift on external clock */
 106#define SR_OUT          0x10            /* Shift out if 1 */
 107
 108/* Bits in IFR and IER */
 109#define IER_SET         0x80            /* set bits in IER */
 110#define IER_CLR         0               /* clear bits in IER */
 111#define SR_INT          0x04            /* Shift register full/empty */
 112#define CB2_INT         0x08
 113#define CB1_INT         0x10            /* transition on CB1 input */
 114
 115static volatile enum pmu_state {
 116        idle,
 117        sending,
 118        intack,
 119        reading,
 120        reading_intr,
 121        locked,
 122} pmu_state;
 123
 124static volatile enum int_data_state {
 125        int_data_empty,
 126        int_data_fill,
 127        int_data_ready,
 128        int_data_flush
 129} int_data_state[2] = { int_data_empty, int_data_empty };
 130
 131static struct adb_request *current_req;
 132static struct adb_request *last_req;
 133static struct adb_request *req_awaiting_reply;
 134static unsigned char interrupt_data[2][32];
 135static int interrupt_data_len[2];
 136static int int_data_last;
 137static unsigned char *reply_ptr;
 138static int data_index;
 139static int data_len;
 140static volatile int adb_int_pending;
 141static volatile int disable_poll;
 142static struct device_node *vias;
 143static int pmu_kind = PMU_UNKNOWN;
 144static int pmu_fully_inited;
 145static int pmu_has_adb;
 146static struct device_node *gpio_node;
 147static unsigned char __iomem *gpio_reg;
 148static int gpio_irq = NO_IRQ;
 149static int gpio_irq_enabled = -1;
 150static volatile int pmu_suspended;
 151static spinlock_t pmu_lock;
 152static u8 pmu_intr_mask;
 153static int pmu_version;
 154static int drop_interrupts;
 155#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 156static int option_lid_wakeup = 1;
 157#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 158static unsigned long async_req_locks;
 159static unsigned int pmu_irq_stats[11];
 160
 161static struct proc_dir_entry *proc_pmu_root;
 162static struct proc_dir_entry *proc_pmu_info;
 163static struct proc_dir_entry *proc_pmu_irqstats;
 164static struct proc_dir_entry *proc_pmu_options;
 165static int option_server_mode;
 166
 167int pmu_battery_count;
 168int pmu_cur_battery;
 169unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT;
 170struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
 171static int query_batt_timer = BATTERY_POLLING_COUNT;
 172static struct adb_request batt_req;
 173static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
 174
 175int __fake_sleep;
 176int asleep;
 177
 178#ifdef CONFIG_ADB
 179static int adb_dev_map;
 180static int pmu_adb_flags;
 181
 182static int pmu_probe(void);
 183static int pmu_init(void);
 184static int pmu_send_request(struct adb_request *req, int sync);
 185static int pmu_adb_autopoll(int devs);
 186static int pmu_adb_reset_bus(void);
 187#endif /* CONFIG_ADB */
 188
 189static int init_pmu(void);
 190static void pmu_start(void);
 191static irqreturn_t via_pmu_interrupt(int irq, void *arg);
 192static irqreturn_t gpio1_interrupt(int irq, void *arg);
 193static const struct file_operations pmu_info_proc_fops;
 194static const struct file_operations pmu_irqstats_proc_fops;
 195static void pmu_pass_intr(unsigned char *data, int len);
 196static const struct file_operations pmu_battery_proc_fops;
 197static const struct file_operations pmu_options_proc_fops;
 198
 199#ifdef CONFIG_ADB
 200struct adb_driver via_pmu_driver = {
 201        "PMU",
 202        pmu_probe,
 203        pmu_init,
 204        pmu_send_request,
 205        pmu_adb_autopoll,
 206        pmu_poll_adb,
 207        pmu_adb_reset_bus
 208};
 209#endif /* CONFIG_ADB */
 210
 211extern void low_sleep_handler(void);
 212extern void enable_kernel_altivec(void);
 213extern void enable_kernel_fp(void);
 214
 215#ifdef DEBUG_SLEEP
 216int pmu_polled_request(struct adb_request *req);
 217void pmu_blink(int n);
 218#endif
 219
 220/*
 221 * This table indicates for each PMU opcode:
 222 * - the number of data bytes to be sent with the command, or -1
 223 *   if a length byte should be sent,
 224 * - the number of response bytes which the PMU will return, or
 225 *   -1 if it will send a length byte.
 226 */
 227static const s8 pmu_data_len[256][2] = {
 228/*         0       1       2       3       4       5       6       7  */
 229/*00*/  {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 230/*08*/  {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 231/*10*/  { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 232/*18*/  { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
 233/*20*/  {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
 234/*28*/  { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
 235/*30*/  { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 236/*38*/  { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
 237/*40*/  { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 238/*48*/  { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
 239/*50*/  { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
 240/*58*/  { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
 241/*60*/  { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 242/*68*/  { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
 243/*70*/  { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 244/*78*/  { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
 245/*80*/  { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 246/*88*/  { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 247/*90*/  { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 248/*98*/  { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 249/*a0*/  { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
 250/*a8*/  { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 251/*b0*/  {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 252/*b8*/  {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 253/*c0*/  {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 254/*c8*/  {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 255/*d0*/  { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 256/*d8*/  { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
 257/*e0*/  {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
 258/*e8*/  { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
 259/*f0*/  {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
 260/*f8*/  {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
 261};
 262
 263static char *pbook_type[] = {
 264        "Unknown PowerBook",
 265        "PowerBook 2400/3400/3500(G3)",
 266        "PowerBook G3 Series",
 267        "1999 PowerBook G3",
 268        "Core99"
 269};
 270
 271int __init find_via_pmu(void)
 272{
 273        u64 taddr;
 274        const u32 *reg;
 275
 276        if (via != 0)
 277                return 1;
 278        vias = of_find_node_by_name(NULL, "via-pmu");
 279        if (vias == NULL)
 280                return 0;
 281
 282        reg = of_get_property(vias, "reg", NULL);
 283        if (reg == NULL) {
 284                printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
 285                goto fail;
 286        }
 287        taddr = of_translate_address(vias, reg);
 288        if (taddr == OF_BAD_ADDR) {
 289                printk(KERN_ERR "via-pmu: Can't translate address !\n");
 290                goto fail;
 291        }
 292
 293        spin_lock_init(&pmu_lock);
 294
 295        pmu_has_adb = 1;
 296
 297        pmu_intr_mask = PMU_INT_PCEJECT |
 298                        PMU_INT_SNDBRT |
 299                        PMU_INT_ADB |
 300                        PMU_INT_TICK;
 301        
 302        if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
 303            || of_device_is_compatible(vias->parent, "ohare")))
 304                pmu_kind = PMU_OHARE_BASED;
 305        else if (of_device_is_compatible(vias->parent, "paddington"))
 306                pmu_kind = PMU_PADDINGTON_BASED;
 307        else if (of_device_is_compatible(vias->parent, "heathrow"))
 308                pmu_kind = PMU_HEATHROW_BASED;
 309        else if (of_device_is_compatible(vias->parent, "Keylargo")
 310                 || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
 311                struct device_node *gpiop;
 312                struct device_node *adbp;
 313                u64 gaddr = OF_BAD_ADDR;
 314
 315                pmu_kind = PMU_KEYLARGO_BASED;
 316                adbp = of_find_node_by_type(NULL, "adb");
 317                pmu_has_adb = (adbp != NULL);
 318                of_node_put(adbp);
 319                pmu_intr_mask = PMU_INT_PCEJECT |
 320                                PMU_INT_SNDBRT |
 321                                PMU_INT_ADB |
 322                                PMU_INT_TICK |
 323                                PMU_INT_ENVIRONMENT;
 324                
 325                gpiop = of_find_node_by_name(NULL, "gpio");
 326                if (gpiop) {
 327                        reg = of_get_property(gpiop, "reg", NULL);
 328                        if (reg)
 329                                gaddr = of_translate_address(gpiop, reg);
 330                        if (gaddr != OF_BAD_ADDR)
 331                                gpio_reg = ioremap(gaddr, 0x10);
 332                        of_node_put(gpiop);
 333                }
 334                if (gpio_reg == NULL) {
 335                        printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
 336                        goto fail;
 337                }
 338        } else
 339                pmu_kind = PMU_UNKNOWN;
 340
 341        via = ioremap(taddr, 0x2000);
 342        if (via == NULL) {
 343                printk(KERN_ERR "via-pmu: Can't map address !\n");
 344                goto fail_via_remap;
 345        }
 346        
 347        out_8(&via[IER], IER_CLR | 0x7f);       /* disable all intrs */
 348        out_8(&via[IFR], 0x7f);                 /* clear IFR */
 349
 350        pmu_state = idle;
 351
 352        if (!init_pmu())
 353                goto fail_init;
 354
 355        printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
 356               PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
 357               
 358        sys_ctrler = SYS_CTRLER_PMU;
 359        
 360        return 1;
 361
 362 fail_init:
 363        iounmap(via);
 364        via = NULL;
 365 fail_via_remap:
 366        iounmap(gpio_reg);
 367        gpio_reg = NULL;
 368 fail:
 369        of_node_put(vias);
 370        vias = NULL;
 371        return 0;
 372}
 373
 374#ifdef CONFIG_ADB
 375static int pmu_probe(void)
 376{
 377        return vias == NULL? -ENODEV: 0;
 378}
 379
 380static int __init pmu_init(void)
 381{
 382        if (vias == NULL)
 383                return -ENODEV;
 384        return 0;
 385}
 386#endif /* CONFIG_ADB */
 387
 388/*
 389 * We can't wait until pmu_init gets called, that happens too late.
 390 * It happens after IDE and SCSI initialization, which can take a few
 391 * seconds, and by that time the PMU could have given up on us and
 392 * turned us off.
 393 * Thus this is called with arch_initcall rather than device_initcall.
 394 */
 395static int __init via_pmu_start(void)
 396{
 397        unsigned int irq;
 398
 399        if (vias == NULL)
 400                return -ENODEV;
 401
 402        batt_req.complete = 1;
 403
 404        irq = irq_of_parse_and_map(vias, 0);
 405        if (irq == NO_IRQ) {
 406                printk(KERN_ERR "via-pmu: can't map interrupt\n");
 407                return -ENODEV;
 408        }
 409        /* We set IRQF_NO_SUSPEND because we don't want the interrupt
 410         * to be disabled between the 2 passes of driver suspend, we
 411         * control our own disabling for that one
 412         */
 413        if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND,
 414                        "VIA-PMU", (void *)0)) {
 415                printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
 416                return -ENODEV;
 417        }
 418
 419        if (pmu_kind == PMU_KEYLARGO_BASED) {
 420                gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
 421                if (gpio_node == NULL)
 422                        gpio_node = of_find_node_by_name(NULL,
 423                                                         "pmu-interrupt");
 424                if (gpio_node)
 425                        gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 426
 427                if (gpio_irq != NO_IRQ) {
 428                        if (request_irq(gpio_irq, gpio1_interrupt,
 429                                        IRQF_NO_SUSPEND, "GPIO1 ADB",
 430                                        (void *)0))
 431                                printk(KERN_ERR "pmu: can't get irq %d"
 432                                       " (GPIO1)\n", gpio_irq);
 433                        else
 434                                gpio_irq_enabled = 1;
 435                }
 436        }
 437
 438        /* Enable interrupts */
 439        out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
 440
 441        pmu_fully_inited = 1;
 442
 443        /* Make sure PMU settle down before continuing. This is _very_ important
 444         * since the IDE probe may shut interrupts down for quite a bit of time. If
 445         * a PMU communication is pending while this happens, the PMU may timeout
 446         * Not that on Core99 machines, the PMU keeps sending us environement
 447         * messages, we should find a way to either fix IDE or make it call
 448         * pmu_suspend() before masking interrupts. This can also happens while
 449         * scolling with some fbdevs.
 450         */
 451        do {
 452                pmu_poll();
 453        } while (pmu_state != idle);
 454
 455        return 0;
 456}
 457
 458arch_initcall(via_pmu_start);
 459
 460/*
 461 * This has to be done after pci_init, which is a subsys_initcall.
 462 */
 463static int __init via_pmu_dev_init(void)
 464{
 465        if (vias == NULL)
 466                return -ENODEV;
 467
 468#ifdef CONFIG_PMAC_BACKLIGHT
 469        /* Initialize backlight */
 470        pmu_backlight_init();
 471#endif
 472
 473#ifdef CONFIG_PPC32
 474        if (of_machine_is_compatible("AAPL,3400/2400") ||
 475                of_machine_is_compatible("AAPL,3500")) {
 476                int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 477                        NULL, PMAC_MB_INFO_MODEL, 0);
 478                pmu_battery_count = 1;
 479                if (mb == PMAC_TYPE_COMET)
 480                        pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
 481                else
 482                        pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
 483        } else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
 484                of_machine_is_compatible("PowerBook1,1")) {
 485                pmu_battery_count = 2;
 486                pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 487                pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
 488        } else {
 489                struct device_node* prim =
 490                        of_find_node_by_name(NULL, "power-mgt");
 491                const u32 *prim_info = NULL;
 492                if (prim)
 493                        prim_info = of_get_property(prim, "prim-info", NULL);
 494                if (prim_info) {
 495                        /* Other stuffs here yet unknown */
 496                        pmu_battery_count = (prim_info[6] >> 16) & 0xff;
 497                        pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 498                        if (pmu_battery_count > 1)
 499                                pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
 500                }
 501                of_node_put(prim);
 502        }
 503#endif /* CONFIG_PPC32 */
 504
 505        /* Create /proc/pmu */
 506        proc_pmu_root = proc_mkdir("pmu", NULL);
 507        if (proc_pmu_root) {
 508                long i;
 509
 510                for (i=0; i<pmu_battery_count; i++) {
 511                        char title[16];
 512                        sprintf(title, "battery_%ld", i);
 513                        proc_pmu_batt[i] = proc_create_data(title, 0, proc_pmu_root,
 514                                        &pmu_battery_proc_fops, (void *)i);
 515                }
 516
 517                proc_pmu_info = proc_create("info", 0, proc_pmu_root, &pmu_info_proc_fops);
 518                proc_pmu_irqstats = proc_create("interrupts", 0, proc_pmu_root,
 519                                                &pmu_irqstats_proc_fops);
 520                proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
 521                                                &pmu_options_proc_fops);
 522        }
 523        return 0;
 524}
 525
 526device_initcall(via_pmu_dev_init);
 527
 528static int
 529init_pmu(void)
 530{
 531        int timeout;
 532        struct adb_request req;
 533
 534        out_8(&via[B], via[B] | TREQ);                  /* negate TREQ */
 535        out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK);  /* TACK in, TREQ out */
 536
 537        pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
 538        timeout =  100000;
 539        while (!req.complete) {
 540                if (--timeout < 0) {
 541                        printk(KERN_ERR "init_pmu: no response from PMU\n");
 542                        return 0;
 543                }
 544                udelay(10);
 545                pmu_poll();
 546        }
 547
 548        /* ack all pending interrupts */
 549        timeout = 100000;
 550        interrupt_data[0][0] = 1;
 551        while (interrupt_data[0][0] || pmu_state != idle) {
 552                if (--timeout < 0) {
 553                        printk(KERN_ERR "init_pmu: timed out acking intrs\n");
 554                        return 0;
 555                }
 556                if (pmu_state == idle)
 557                        adb_int_pending = 1;
 558                via_pmu_interrupt(0, NULL);
 559                udelay(10);
 560        }
 561
 562        /* Tell PMU we are ready.  */
 563        if (pmu_kind == PMU_KEYLARGO_BASED) {
 564                pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
 565                while (!req.complete)
 566                        pmu_poll();
 567        }
 568
 569        /* Read PMU version */
 570        pmu_request(&req, NULL, 1, PMU_GET_VERSION);
 571        pmu_wait_complete(&req);
 572        if (req.reply_len > 0)
 573                pmu_version = req.reply[0];
 574        
 575        /* Read server mode setting */
 576        if (pmu_kind == PMU_KEYLARGO_BASED) {
 577                pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
 578                            PMU_PWR_GET_POWERUP_EVENTS);
 579                pmu_wait_complete(&req);
 580                if (req.reply_len == 2) {
 581                        if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
 582                                option_server_mode = 1;
 583                        printk(KERN_INFO "via-pmu: Server Mode is %s\n",
 584                               option_server_mode ? "enabled" : "disabled");
 585                }
 586        }
 587        return 1;
 588}
 589
 590int
 591pmu_get_model(void)
 592{
 593        return pmu_kind;
 594}
 595
 596static void pmu_set_server_mode(int server_mode)
 597{
 598        struct adb_request req;
 599
 600        if (pmu_kind != PMU_KEYLARGO_BASED)
 601                return;
 602
 603        option_server_mode = server_mode;
 604        pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
 605        pmu_wait_complete(&req);
 606        if (req.reply_len < 2)
 607                return;
 608        if (server_mode)
 609                pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
 610                            PMU_PWR_SET_POWERUP_EVENTS,
 611                            req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
 612        else
 613                pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
 614                            PMU_PWR_CLR_POWERUP_EVENTS,
 615                            req.reply[0], PMU_PWR_WAKEUP_AC_INSERT); 
 616        pmu_wait_complete(&req);
 617}
 618
 619/* This new version of the code for 2400/3400/3500 powerbooks
 620 * is inspired from the implementation in gkrellm-pmu
 621 */
 622static void
 623done_battery_state_ohare(struct adb_request* req)
 624{
 625        /* format:
 626         *  [0]    :  flags
 627         *    0x01 :  AC indicator
 628         *    0x02 :  charging
 629         *    0x04 :  battery exist
 630         *    0x08 :  
 631         *    0x10 :  
 632         *    0x20 :  full charged
 633         *    0x40 :  pcharge reset
 634         *    0x80 :  battery exist
 635         *
 636         *  [1][2] :  battery voltage
 637         *  [3]    :  CPU temperature
 638         *  [4]    :  battery temperature
 639         *  [5]    :  current
 640         *  [6][7] :  pcharge
 641         *              --tkoba
 642         */
 643        unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
 644        long pcharge, charge, vb, vmax, lmax;
 645        long vmax_charging, vmax_charged;
 646        long amperage, voltage, time, max;
 647        int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 648                        NULL, PMAC_MB_INFO_MODEL, 0);
 649
 650        if (req->reply[0] & 0x01)
 651                pmu_power_flags |= PMU_PWR_AC_PRESENT;
 652        else
 653                pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
 654        
 655        if (mb == PMAC_TYPE_COMET) {
 656                vmax_charged = 189;
 657                vmax_charging = 213;
 658                lmax = 6500;
 659        } else {
 660                vmax_charged = 330;
 661                vmax_charging = 330;
 662                lmax = 6500;
 663        }
 664        vmax = vmax_charged;
 665
 666        /* If battery installed */
 667        if (req->reply[0] & 0x04) {
 668                bat_flags |= PMU_BATT_PRESENT;
 669                if (req->reply[0] & 0x02)
 670                        bat_flags |= PMU_BATT_CHARGING;
 671                vb = (req->reply[1] << 8) | req->reply[2];
 672                voltage = (vb * 265 + 72665) / 10;
 673                amperage = req->reply[5];
 674                if ((req->reply[0] & 0x01) == 0) {
 675                        if (amperage > 200)
 676                                vb += ((amperage - 200) * 15)/100;
 677                } else if (req->reply[0] & 0x02) {
 678                        vb = (vb * 97) / 100;
 679                        vmax = vmax_charging;
 680                }
 681                charge = (100 * vb) / vmax;
 682                if (req->reply[0] & 0x40) {
 683                        pcharge = (req->reply[6] << 8) + req->reply[7];
 684                        if (pcharge > lmax)
 685                                pcharge = lmax;
 686                        pcharge *= 100;
 687                        pcharge = 100 - pcharge / lmax;
 688                        if (pcharge < charge)
 689                                charge = pcharge;
 690                }
 691                if (amperage > 0)
 692                        time = (charge * 16440) / amperage;
 693                else
 694                        time = 0;
 695                max = 100;
 696                amperage = -amperage;
 697        } else
 698                charge = max = amperage = voltage = time = 0;
 699
 700        pmu_batteries[pmu_cur_battery].flags = bat_flags;
 701        pmu_batteries[pmu_cur_battery].charge = charge;
 702        pmu_batteries[pmu_cur_battery].max_charge = max;
 703        pmu_batteries[pmu_cur_battery].amperage = amperage;
 704        pmu_batteries[pmu_cur_battery].voltage = voltage;
 705        pmu_batteries[pmu_cur_battery].time_remaining = time;
 706
 707        clear_bit(0, &async_req_locks);
 708}
 709
 710static void
 711done_battery_state_smart(struct adb_request* req)
 712{
 713        /* format:
 714         *  [0] : format of this structure (known: 3,4,5)
 715         *  [1] : flags
 716         *  
 717         *  format 3 & 4:
 718         *  
 719         *  [2] : charge
 720         *  [3] : max charge
 721         *  [4] : current
 722         *  [5] : voltage
 723         *  
 724         *  format 5:
 725         *  
 726         *  [2][3] : charge
 727         *  [4][5] : max charge
 728         *  [6][7] : current
 729         *  [8][9] : voltage
 730         */
 731         
 732        unsigned int bat_flags = PMU_BATT_TYPE_SMART;
 733        int amperage;
 734        unsigned int capa, max, voltage;
 735        
 736        if (req->reply[1] & 0x01)
 737                pmu_power_flags |= PMU_PWR_AC_PRESENT;
 738        else
 739                pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
 740
 741
 742        capa = max = amperage = voltage = 0;
 743        
 744        if (req->reply[1] & 0x04) {
 745                bat_flags |= PMU_BATT_PRESENT;
 746                switch(req->reply[0]) {
 747                        case 3:
 748                        case 4: capa = req->reply[2];
 749                                max = req->reply[3];
 750                                amperage = *((signed char *)&req->reply[4]);
 751                                voltage = req->reply[5];
 752                                break;
 753                        case 5: capa = (req->reply[2] << 8) | req->reply[3];
 754                                max = (req->reply[4] << 8) | req->reply[5];
 755                                amperage = *((signed short *)&req->reply[6]);
 756                                voltage = (req->reply[8] << 8) | req->reply[9];
 757                                break;
 758                        default:
 759                                pr_warn("pmu.c: unrecognized battery info, "
 760                                        "len: %d, %4ph\n", req->reply_len,
 761                                                           req->reply);
 762                                break;
 763                }
 764        }
 765
 766        if ((req->reply[1] & 0x01) && (amperage > 0))
 767                bat_flags |= PMU_BATT_CHARGING;
 768
 769        pmu_batteries[pmu_cur_battery].flags = bat_flags;
 770        pmu_batteries[pmu_cur_battery].charge = capa;
 771        pmu_batteries[pmu_cur_battery].max_charge = max;
 772        pmu_batteries[pmu_cur_battery].amperage = amperage;
 773        pmu_batteries[pmu_cur_battery].voltage = voltage;
 774        if (amperage) {
 775                if ((req->reply[1] & 0x01) && (amperage > 0))
 776                        pmu_batteries[pmu_cur_battery].time_remaining
 777                                = ((max-capa) * 3600) / amperage;
 778                else
 779                        pmu_batteries[pmu_cur_battery].time_remaining
 780                                = (capa * 3600) / (-amperage);
 781        } else
 782                pmu_batteries[pmu_cur_battery].time_remaining = 0;
 783
 784        pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
 785
 786        clear_bit(0, &async_req_locks);
 787}
 788
 789static void
 790query_battery_state(void)
 791{
 792        if (test_and_set_bit(0, &async_req_locks))
 793                return;
 794        if (pmu_kind == PMU_OHARE_BASED)
 795                pmu_request(&batt_req, done_battery_state_ohare,
 796                        1, PMU_BATTERY_STATE);
 797        else
 798                pmu_request(&batt_req, done_battery_state_smart,
 799                        2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
 800}
 801
 802static int pmu_info_proc_show(struct seq_file *m, void *v)
 803{
 804        seq_printf(m, "PMU driver version     : %d\n", PMU_DRIVER_VERSION);
 805        seq_printf(m, "PMU firmware version   : %02x\n", pmu_version);
 806        seq_printf(m, "AC Power               : %d\n",
 807                ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
 808        seq_printf(m, "Battery count          : %d\n", pmu_battery_count);
 809
 810        return 0;
 811}
 812
 813static int pmu_info_proc_open(struct inode *inode, struct file *file)
 814{
 815        return single_open(file, pmu_info_proc_show, NULL);
 816}
 817
 818static const struct file_operations pmu_info_proc_fops = {
 819        .owner          = THIS_MODULE,
 820        .open           = pmu_info_proc_open,
 821        .read           = seq_read,
 822        .llseek         = seq_lseek,
 823        .release        = single_release,
 824};
 825
 826static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
 827{
 828        int i;
 829        static const char *irq_names[] = {
 830                "Total CB1 triggered events",
 831                "Total GPIO1 triggered events",
 832                "PC-Card eject button",
 833                "Sound/Brightness button",
 834                "ADB message",
 835                "Battery state change",
 836                "Environment interrupt",
 837                "Tick timer",
 838                "Ghost interrupt (zero len)",
 839                "Empty interrupt (empty mask)",
 840                "Max irqs in a row"
 841        };
 842
 843        for (i=0; i<11; i++) {
 844                seq_printf(m, " %2u: %10u (%s)\n",
 845                             i, pmu_irq_stats[i], irq_names[i]);
 846        }
 847        return 0;
 848}
 849
 850static int pmu_irqstats_proc_open(struct inode *inode, struct file *file)
 851{
 852        return single_open(file, pmu_irqstats_proc_show, NULL);
 853}
 854
 855static const struct file_operations pmu_irqstats_proc_fops = {
 856        .owner          = THIS_MODULE,
 857        .open           = pmu_irqstats_proc_open,
 858        .read           = seq_read,
 859        .llseek         = seq_lseek,
 860        .release        = single_release,
 861};
 862
 863static int pmu_battery_proc_show(struct seq_file *m, void *v)
 864{
 865        long batnum = (long)m->private;
 866        
 867        seq_putc(m, '\n');
 868        seq_printf(m, "flags      : %08x\n", pmu_batteries[batnum].flags);
 869        seq_printf(m, "charge     : %d\n", pmu_batteries[batnum].charge);
 870        seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
 871        seq_printf(m, "current    : %d\n", pmu_batteries[batnum].amperage);
 872        seq_printf(m, "voltage    : %d\n", pmu_batteries[batnum].voltage);
 873        seq_printf(m, "time rem.  : %d\n", pmu_batteries[batnum].time_remaining);
 874        return 0;
 875}
 876
 877static int pmu_battery_proc_open(struct inode *inode, struct file *file)
 878{
 879        return single_open(file, pmu_battery_proc_show, PDE_DATA(inode));
 880}
 881
 882static const struct file_operations pmu_battery_proc_fops = {
 883        .owner          = THIS_MODULE,
 884        .open           = pmu_battery_proc_open,
 885        .read           = seq_read,
 886        .llseek         = seq_lseek,
 887        .release        = single_release,
 888};
 889
 890static int pmu_options_proc_show(struct seq_file *m, void *v)
 891{
 892#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 893        if (pmu_kind == PMU_KEYLARGO_BASED &&
 894            pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 895                seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
 896#endif
 897        if (pmu_kind == PMU_KEYLARGO_BASED)
 898                seq_printf(m, "server_mode=%d\n", option_server_mode);
 899
 900        return 0;
 901}
 902
 903static int pmu_options_proc_open(struct inode *inode, struct file *file)
 904{
 905        return single_open(file, pmu_options_proc_show, NULL);
 906}
 907
 908static ssize_t pmu_options_proc_write(struct file *file,
 909                const char __user *buffer, size_t count, loff_t *pos)
 910{
 911        char tmp[33];
 912        char *label, *val;
 913        size_t fcount = count;
 914        
 915        if (!count)
 916                return -EINVAL;
 917        if (count > 32)
 918                count = 32;
 919        if (copy_from_user(tmp, buffer, count))
 920                return -EFAULT;
 921        tmp[count] = 0;
 922
 923        label = tmp;
 924        while(*label == ' ')
 925                label++;
 926        val = label;
 927        while(*val && (*val != '=')) {
 928                if (*val == ' ')
 929                        *val = 0;
 930                val++;
 931        }
 932        if ((*val) == 0)
 933                return -EINVAL;
 934        *(val++) = 0;
 935        while(*val == ' ')
 936                val++;
 937#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 938        if (pmu_kind == PMU_KEYLARGO_BASED &&
 939            pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 940                if (!strcmp(label, "lid_wakeup"))
 941                        option_lid_wakeup = ((*val) == '1');
 942#endif
 943        if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
 944                int new_value;
 945                new_value = ((*val) == '1');
 946                if (new_value != option_server_mode)
 947                        pmu_set_server_mode(new_value);
 948        }
 949        return fcount;
 950}
 951
 952static const struct file_operations pmu_options_proc_fops = {
 953        .owner          = THIS_MODULE,
 954        .open           = pmu_options_proc_open,
 955        .read           = seq_read,
 956        .llseek         = seq_lseek,
 957        .release        = single_release,
 958        .write          = pmu_options_proc_write,
 959};
 960
 961#ifdef CONFIG_ADB
 962/* Send an ADB command */
 963static int pmu_send_request(struct adb_request *req, int sync)
 964{
 965        int i, ret;
 966
 967        if ((vias == NULL) || (!pmu_fully_inited)) {
 968                req->complete = 1;
 969                return -ENXIO;
 970        }
 971
 972        ret = -EINVAL;
 973
 974        switch (req->data[0]) {
 975        case PMU_PACKET:
 976                for (i = 0; i < req->nbytes - 1; ++i)
 977                        req->data[i] = req->data[i+1];
 978                --req->nbytes;
 979                if (pmu_data_len[req->data[0]][1] != 0) {
 980                        req->reply[0] = ADB_RET_OK;
 981                        req->reply_len = 1;
 982                } else
 983                        req->reply_len = 0;
 984                ret = pmu_queue_request(req);
 985                break;
 986        case CUDA_PACKET:
 987                switch (req->data[1]) {
 988                case CUDA_GET_TIME:
 989                        if (req->nbytes != 2)
 990                                break;
 991                        req->data[0] = PMU_READ_RTC;
 992                        req->nbytes = 1;
 993                        req->reply_len = 3;
 994                        req->reply[0] = CUDA_PACKET;
 995                        req->reply[1] = 0;
 996                        req->reply[2] = CUDA_GET_TIME;
 997                        ret = pmu_queue_request(req);
 998                        break;
 999                case CUDA_SET_TIME:
1000                        if (req->nbytes != 6)
1001                                break;
1002                        req->data[0] = PMU_SET_RTC;
1003                        req->nbytes = 5;
1004                        for (i = 1; i <= 4; ++i)
1005                                req->data[i] = req->data[i+1];
1006                        req->reply_len = 3;
1007                        req->reply[0] = CUDA_PACKET;
1008                        req->reply[1] = 0;
1009                        req->reply[2] = CUDA_SET_TIME;
1010                        ret = pmu_queue_request(req);
1011                        break;
1012                }
1013                break;
1014        case ADB_PACKET:
1015                if (!pmu_has_adb)
1016                        return -ENXIO;
1017                for (i = req->nbytes - 1; i > 1; --i)
1018                        req->data[i+2] = req->data[i];
1019                req->data[3] = req->nbytes - 2;
1020                req->data[2] = pmu_adb_flags;
1021                /*req->data[1] = req->data[1];*/
1022                req->data[0] = PMU_ADB_CMD;
1023                req->nbytes += 2;
1024                req->reply_expected = 1;
1025                req->reply_len = 0;
1026                ret = pmu_queue_request(req);
1027                break;
1028        }
1029        if (ret) {
1030                req->complete = 1;
1031                return ret;
1032        }
1033
1034        if (sync)
1035                while (!req->complete)
1036                        pmu_poll();
1037
1038        return 0;
1039}
1040
1041/* Enable/disable autopolling */
1042static int __pmu_adb_autopoll(int devs)
1043{
1044        struct adb_request req;
1045
1046        if (devs) {
1047                pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
1048                            adb_dev_map >> 8, adb_dev_map);
1049                pmu_adb_flags = 2;
1050        } else {
1051                pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
1052                pmu_adb_flags = 0;
1053        }
1054        while (!req.complete)
1055                pmu_poll();
1056        return 0;
1057}
1058
1059static int pmu_adb_autopoll(int devs)
1060{
1061        if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
1062                return -ENXIO;
1063
1064        adb_dev_map = devs;
1065        return __pmu_adb_autopoll(devs);
1066}
1067
1068/* Reset the ADB bus */
1069static int pmu_adb_reset_bus(void)
1070{
1071        struct adb_request req;
1072        int save_autopoll = adb_dev_map;
1073
1074        if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
1075                return -ENXIO;
1076
1077        /* anyone got a better idea?? */
1078        __pmu_adb_autopoll(0);
1079
1080        req.nbytes = 4;
1081        req.done = NULL;
1082        req.data[0] = PMU_ADB_CMD;
1083        req.data[1] = ADB_BUSRESET;
1084        req.data[2] = 0;
1085        req.data[3] = 0;
1086        req.data[4] = 0;
1087        req.reply_len = 0;
1088        req.reply_expected = 1;
1089        if (pmu_queue_request(&req) != 0) {
1090                printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
1091                return -EIO;
1092        }
1093        pmu_wait_complete(&req);
1094
1095        if (save_autopoll != 0)
1096                __pmu_adb_autopoll(save_autopoll);
1097
1098        return 0;
1099}
1100#endif /* CONFIG_ADB */
1101
1102/* Construct and send a pmu request */
1103int
1104pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
1105            int nbytes, ...)
1106{
1107        va_list list;
1108        int i;
1109
1110        if (vias == NULL)
1111                return -ENXIO;
1112
1113        if (nbytes < 0 || nbytes > 32) {
1114                printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
1115                req->complete = 1;
1116                return -EINVAL;
1117        }
1118        req->nbytes = nbytes;
1119        req->done = done;
1120        va_start(list, nbytes);
1121        for (i = 0; i < nbytes; ++i)
1122                req->data[i] = va_arg(list, int);
1123        va_end(list);
1124        req->reply_len = 0;
1125        req->reply_expected = 0;
1126        return pmu_queue_request(req);
1127}
1128
1129int
1130pmu_queue_request(struct adb_request *req)
1131{
1132        unsigned long flags;
1133        int nsend;
1134
1135        if (via == NULL) {
1136                req->complete = 1;
1137                return -ENXIO;
1138        }
1139        if (req->nbytes <= 0) {
1140                req->complete = 1;
1141                return 0;
1142        }
1143        nsend = pmu_data_len[req->data[0]][0];
1144        if (nsend >= 0 && req->nbytes != nsend + 1) {
1145                req->complete = 1;
1146                return -EINVAL;
1147        }
1148
1149        req->next = NULL;
1150        req->sent = 0;
1151        req->complete = 0;
1152
1153        spin_lock_irqsave(&pmu_lock, flags);
1154        if (current_req != 0) {
1155                last_req->next = req;
1156                last_req = req;
1157        } else {
1158                current_req = req;
1159                last_req = req;
1160                if (pmu_state == idle)
1161                        pmu_start();
1162        }
1163        spin_unlock_irqrestore(&pmu_lock, flags);
1164
1165        return 0;
1166}
1167
1168static inline void
1169wait_for_ack(void)
1170{
1171        /* Sightly increased the delay, I had one occurrence of the message
1172         * reported
1173         */
1174        int timeout = 4000;
1175        while ((in_8(&via[B]) & TACK) == 0) {
1176                if (--timeout < 0) {
1177                        printk(KERN_ERR "PMU not responding (!ack)\n");
1178                        return;
1179                }
1180                udelay(10);
1181        }
1182}
1183
1184/* New PMU seems to be very sensitive to those timings, so we make sure
1185 * PCI is flushed immediately */
1186static inline void
1187send_byte(int x)
1188{
1189        volatile unsigned char __iomem *v = via;
1190
1191        out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
1192        out_8(&v[SR], x);
1193        out_8(&v[B], in_8(&v[B]) & ~TREQ);              /* assert TREQ */
1194        (void)in_8(&v[B]);
1195}
1196
1197static inline void
1198recv_byte(void)
1199{
1200        volatile unsigned char __iomem *v = via;
1201
1202        out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
1203        in_8(&v[SR]);           /* resets SR */
1204        out_8(&v[B], in_8(&v[B]) & ~TREQ);
1205        (void)in_8(&v[B]);
1206}
1207
1208static inline void
1209pmu_done(struct adb_request *req)
1210{
1211        void (*done)(struct adb_request *) = req->done;
1212        mb();
1213        req->complete = 1;
1214        /* Here, we assume that if the request has a done member, the
1215         * struct request will survive to setting req->complete to 1
1216         */
1217        if (done)
1218                (*done)(req);
1219}
1220
1221static void
1222pmu_start(void)
1223{
1224        struct adb_request *req;
1225
1226        /* assert pmu_state == idle */
1227        /* get the packet to send */
1228        req = current_req;
1229        if (req == 0 || pmu_state != idle
1230            || (/*req->reply_expected && */req_awaiting_reply))
1231                return;
1232
1233        pmu_state = sending;
1234        data_index = 1;
1235        data_len = pmu_data_len[req->data[0]][0];
1236
1237        /* Sounds safer to make sure ACK is high before writing. This helped
1238         * kill a problem with ADB and some iBooks
1239         */
1240        wait_for_ack();
1241        /* set the shift register to shift out and send a byte */
1242        send_byte(req->data[0]);
1243}
1244
1245void
1246pmu_poll(void)
1247{
1248        if (!via)
1249                return;
1250        if (disable_poll)
1251                return;
1252        via_pmu_interrupt(0, NULL);
1253}
1254
1255void
1256pmu_poll_adb(void)
1257{
1258        if (!via)
1259                return;
1260        if (disable_poll)
1261                return;
1262        /* Kicks ADB read when PMU is suspended */
1263        adb_int_pending = 1;
1264        do {
1265                via_pmu_interrupt(0, NULL);
1266        } while (pmu_suspended && (adb_int_pending || pmu_state != idle
1267                || req_awaiting_reply));
1268}
1269
1270void
1271pmu_wait_complete(struct adb_request *req)
1272{
1273        if (!via)
1274                return;
1275        while((pmu_state != idle && pmu_state != locked) || !req->complete)
1276                via_pmu_interrupt(0, NULL);
1277}
1278
1279/* This function loops until the PMU is idle and prevents it from
1280 * anwsering to ADB interrupts. pmu_request can still be called.
1281 * This is done to avoid spurrious shutdowns when we know we'll have
1282 * interrupts switched off for a long time
1283 */
1284void
1285pmu_suspend(void)
1286{
1287        unsigned long flags;
1288
1289        if (!via)
1290                return;
1291        
1292        spin_lock_irqsave(&pmu_lock, flags);
1293        pmu_suspended++;
1294        if (pmu_suspended > 1) {
1295                spin_unlock_irqrestore(&pmu_lock, flags);
1296                return;
1297        }
1298
1299        do {
1300                spin_unlock_irqrestore(&pmu_lock, flags);
1301                if (req_awaiting_reply)
1302                        adb_int_pending = 1;
1303                via_pmu_interrupt(0, NULL);
1304                spin_lock_irqsave(&pmu_lock, flags);
1305                if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
1306                        if (gpio_irq >= 0)
1307                                disable_irq_nosync(gpio_irq);
1308                        out_8(&via[IER], CB1_INT | IER_CLR);
1309                        spin_unlock_irqrestore(&pmu_lock, flags);
1310                        break;
1311                }
1312        } while (1);
1313}
1314
1315void
1316pmu_resume(void)
1317{
1318        unsigned long flags;
1319
1320        if (!via || (pmu_suspended < 1))
1321                return;
1322
1323        spin_lock_irqsave(&pmu_lock, flags);
1324        pmu_suspended--;
1325        if (pmu_suspended > 0) {
1326                spin_unlock_irqrestore(&pmu_lock, flags);
1327                return;
1328        }
1329        adb_int_pending = 1;
1330        if (gpio_irq >= 0)
1331                enable_irq(gpio_irq);
1332        out_8(&via[IER], CB1_INT | IER_SET);
1333        spin_unlock_irqrestore(&pmu_lock, flags);
1334        pmu_poll();
1335}
1336
1337/* Interrupt data could be the result data from an ADB cmd */
1338static void
1339pmu_handle_data(unsigned char *data, int len)
1340{
1341        unsigned char ints, pirq;
1342        int i = 0;
1343
1344        asleep = 0;
1345        if (drop_interrupts || len < 1) {
1346                adb_int_pending = 0;
1347                pmu_irq_stats[8]++;
1348                return;
1349        }
1350
1351        /* Get PMU interrupt mask */
1352        ints = data[0];
1353
1354        /* Record zero interrupts for stats */
1355        if (ints == 0)
1356                pmu_irq_stats[9]++;
1357
1358        /* Hack to deal with ADB autopoll flag */
1359        if (ints & PMU_INT_ADB)
1360                ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
1361
1362next:
1363
1364        if (ints == 0) {
1365                if (i > pmu_irq_stats[10])
1366                        pmu_irq_stats[10] = i;
1367                return;
1368        }
1369
1370        for (pirq = 0; pirq < 8; pirq++)
1371                if (ints & (1 << pirq))
1372                        break;
1373        pmu_irq_stats[pirq]++;
1374        i++;
1375        ints &= ~(1 << pirq);
1376
1377        /* Note: for some reason, we get an interrupt with len=1,
1378         * data[0]==0 after each normal ADB interrupt, at least
1379         * on the Pismo. Still investigating...  --BenH
1380         */
1381        if ((1 << pirq) & PMU_INT_ADB) {
1382                if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
1383                        struct adb_request *req = req_awaiting_reply;
1384                        if (req == 0) {
1385                                printk(KERN_ERR "PMU: extra ADB reply\n");
1386                                return;
1387                        }
1388                        req_awaiting_reply = NULL;
1389                        if (len <= 2)
1390                                req->reply_len = 0;
1391                        else {
1392                                memcpy(req->reply, data + 1, len - 1);
1393                                req->reply_len = len - 1;
1394                        }
1395                        pmu_done(req);
1396                } else {
1397                        if (len == 4 && data[1] == 0x2c) {
1398                                extern int xmon_wants_key, xmon_adb_keycode;
1399                                if (xmon_wants_key) {
1400                                        xmon_adb_keycode = data[2];
1401                                        return;
1402                                }
1403                        }
1404#ifdef CONFIG_ADB
1405                        /*
1406                         * XXX On the [23]400 the PMU gives us an up
1407                         * event for keycodes 0x74 or 0x75 when the PC
1408                         * card eject buttons are released, so we
1409                         * ignore those events.
1410                         */
1411                        if (!(pmu_kind == PMU_OHARE_BASED && len == 4
1412                              && data[1] == 0x2c && data[3] == 0xff
1413                              && (data[2] & ~1) == 0xf4))
1414                                adb_input(data+1, len-1, 1);
1415#endif /* CONFIG_ADB */         
1416                }
1417        }
1418        /* Sound/brightness button pressed */
1419        else if ((1 << pirq) & PMU_INT_SNDBRT) {
1420#ifdef CONFIG_PMAC_BACKLIGHT
1421                if (len == 3)
1422                        pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
1423#endif
1424        }
1425        /* Tick interrupt */
1426        else if ((1 << pirq) & PMU_INT_TICK) {
1427                /* Environement or tick interrupt, query batteries */
1428                if (pmu_battery_count) {
1429                        if ((--query_batt_timer) == 0) {
1430                                query_battery_state();
1431                                query_batt_timer = BATTERY_POLLING_COUNT;
1432                        }
1433                }
1434        }
1435        else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
1436                if (pmu_battery_count)
1437                        query_battery_state();
1438                pmu_pass_intr(data, len);
1439                /* len == 6 is probably a bad check. But how do I
1440                 * know what PMU versions send what events here? */
1441                if (len == 6) {
1442                        via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
1443                        via_pmu_event(PMU_EVT_LID, data[1]&1);
1444                }
1445        } else {
1446               pmu_pass_intr(data, len);
1447        }
1448        goto next;
1449}
1450
1451static struct adb_request*
1452pmu_sr_intr(void)
1453{
1454        struct adb_request *req;
1455        int bite = 0;
1456
1457        if (via[B] & TREQ) {
1458                printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
1459                out_8(&via[IFR], SR_INT);
1460                return NULL;
1461        }
1462        /* The ack may not yet be low when we get the interrupt */
1463        while ((in_8(&via[B]) & TACK) != 0)
1464                        ;
1465
1466        /* if reading grab the byte, and reset the interrupt */
1467        if (pmu_state == reading || pmu_state == reading_intr)
1468                bite = in_8(&via[SR]);
1469
1470        /* reset TREQ and wait for TACK to go high */
1471        out_8(&via[B], in_8(&via[B]) | TREQ);
1472        wait_for_ack();
1473
1474        switch (pmu_state) {
1475        case sending:
1476                req = current_req;
1477                if (data_len < 0) {
1478                        data_len = req->nbytes - 1;
1479                        send_byte(data_len);
1480                        break;
1481                }
1482                if (data_index <= data_len) {
1483                        send_byte(req->data[data_index++]);
1484                        break;
1485                }
1486                req->sent = 1;
1487                data_len = pmu_data_len[req->data[0]][1];
1488                if (data_len == 0) {
1489                        pmu_state = idle;
1490                        current_req = req->next;
1491                        if (req->reply_expected)
1492                                req_awaiting_reply = req;
1493                        else
1494                                return req;
1495                } else {
1496                        pmu_state = reading;
1497                        data_index = 0;
1498                        reply_ptr = req->reply + req->reply_len;
1499                        recv_byte();
1500                }
1501                break;
1502
1503        case intack:
1504                data_index = 0;
1505                data_len = -1;
1506                pmu_state = reading_intr;
1507                reply_ptr = interrupt_data[int_data_last];
1508                recv_byte();
1509                if (gpio_irq >= 0 && !gpio_irq_enabled) {
1510                        enable_irq(gpio_irq);
1511                        gpio_irq_enabled = 1;
1512                }
1513                break;
1514
1515        case reading:
1516        case reading_intr:
1517                if (data_len == -1) {
1518                        data_len = bite;
1519                        if (bite > 32)
1520                                printk(KERN_ERR "PMU: bad reply len %d\n", bite);
1521                } else if (data_index < 32) {
1522                        reply_ptr[data_index++] = bite;
1523                }
1524                if (data_index < data_len) {
1525                        recv_byte();
1526                        break;
1527                }
1528
1529                if (pmu_state == reading_intr) {
1530                        pmu_state = idle;
1531                        int_data_state[int_data_last] = int_data_ready;
1532                        interrupt_data_len[int_data_last] = data_len;
1533                } else {
1534                        req = current_req;
1535                        /* 
1536                         * For PMU sleep and freq change requests, we lock the
1537                         * PMU until it's explicitly unlocked. This avoids any
1538                         * spurrious event polling getting in
1539                         */
1540                        current_req = req->next;
1541                        req->reply_len += data_index;
1542                        if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
1543                                pmu_state = locked;
1544                        else
1545                                pmu_state = idle;
1546                        return req;
1547                }
1548                break;
1549
1550        default:
1551                printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
1552                       pmu_state);
1553        }
1554        return NULL;
1555}
1556
1557static irqreturn_t
1558via_pmu_interrupt(int irq, void *arg)
1559{
1560        unsigned long flags;
1561        int intr;
1562        int nloop = 0;
1563        int int_data = -1;
1564        struct adb_request *req = NULL;
1565        int handled = 0;
1566
1567        /* This is a bit brutal, we can probably do better */
1568        spin_lock_irqsave(&pmu_lock, flags);
1569        ++disable_poll;
1570        
1571        for (;;) {
1572                intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
1573                if (intr == 0)
1574                        break;
1575                handled = 1;
1576                if (++nloop > 1000) {
1577                        printk(KERN_DEBUG "PMU: stuck in intr loop, "
1578                               "intr=%x, ier=%x pmu_state=%d\n",
1579                               intr, in_8(&via[IER]), pmu_state);
1580                        break;
1581                }
1582                out_8(&via[IFR], intr);
1583                if (intr & CB1_INT) {
1584                        adb_int_pending = 1;
1585                        pmu_irq_stats[0]++;
1586                }
1587                if (intr & SR_INT) {
1588                        req = pmu_sr_intr();
1589                        if (req)
1590                                break;
1591                }
1592        }
1593
1594recheck:
1595        if (pmu_state == idle) {
1596                if (adb_int_pending) {
1597                        if (int_data_state[0] == int_data_empty)
1598                                int_data_last = 0;
1599                        else if (int_data_state[1] == int_data_empty)
1600                                int_data_last = 1;
1601                        else
1602                                goto no_free_slot;
1603                        pmu_state = intack;
1604                        int_data_state[int_data_last] = int_data_fill;
1605                        /* Sounds safer to make sure ACK is high before writing.
1606                         * This helped kill a problem with ADB and some iBooks
1607                         */
1608                        wait_for_ack();
1609                        send_byte(PMU_INT_ACK);
1610                        adb_int_pending = 0;
1611                } else if (current_req)
1612                        pmu_start();
1613        }
1614no_free_slot:                   
1615        /* Mark the oldest buffer for flushing */
1616        if (int_data_state[!int_data_last] == int_data_ready) {
1617                int_data_state[!int_data_last] = int_data_flush;
1618                int_data = !int_data_last;
1619        } else if (int_data_state[int_data_last] == int_data_ready) {
1620                int_data_state[int_data_last] = int_data_flush;
1621                int_data = int_data_last;
1622        }
1623        --disable_poll;
1624        spin_unlock_irqrestore(&pmu_lock, flags);
1625
1626        /* Deal with completed PMU requests outside of the lock */
1627        if (req) {
1628                pmu_done(req);
1629                req = NULL;
1630        }
1631                
1632        /* Deal with interrupt datas outside of the lock */
1633        if (int_data >= 0) {
1634                pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);
1635                spin_lock_irqsave(&pmu_lock, flags);
1636                ++disable_poll;
1637                int_data_state[int_data] = int_data_empty;
1638                int_data = -1;
1639                goto recheck;
1640        }
1641
1642        return IRQ_RETVAL(handled);
1643}
1644
1645void
1646pmu_unlock(void)
1647{
1648        unsigned long flags;
1649
1650        spin_lock_irqsave(&pmu_lock, flags);
1651        if (pmu_state == locked)
1652                pmu_state = idle;
1653        adb_int_pending = 1;
1654        spin_unlock_irqrestore(&pmu_lock, flags);
1655}
1656
1657
1658static irqreturn_t
1659gpio1_interrupt(int irq, void *arg)
1660{
1661        unsigned long flags;
1662
1663        if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
1664                spin_lock_irqsave(&pmu_lock, flags);
1665                if (gpio_irq_enabled > 0) {
1666                        disable_irq_nosync(gpio_irq);
1667                        gpio_irq_enabled = 0;
1668                }
1669                pmu_irq_stats[1]++;
1670                adb_int_pending = 1;
1671                spin_unlock_irqrestore(&pmu_lock, flags);
1672                via_pmu_interrupt(0, NULL);
1673                return IRQ_HANDLED;
1674        }
1675        return IRQ_NONE;
1676}
1677
1678void
1679pmu_enable_irled(int on)
1680{
1681        struct adb_request req;
1682
1683        if (vias == NULL)
1684                return ;
1685        if (pmu_kind == PMU_KEYLARGO_BASED)
1686                return ;
1687
1688        pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
1689            (on ? PMU_POW_ON : PMU_POW_OFF));
1690        pmu_wait_complete(&req);
1691}
1692
1693void
1694pmu_restart(void)
1695{
1696        struct adb_request req;
1697
1698        if (via == NULL)
1699                return;
1700
1701        local_irq_disable();
1702
1703        drop_interrupts = 1;
1704        
1705        if (pmu_kind != PMU_KEYLARGO_BASED) {
1706                pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1707                                                PMU_INT_TICK );
1708                while(!req.complete)
1709                        pmu_poll();
1710        }
1711
1712        pmu_request(&req, NULL, 1, PMU_RESET);
1713        pmu_wait_complete(&req);
1714        for (;;)
1715                ;
1716}
1717
1718void
1719pmu_shutdown(void)
1720{
1721        struct adb_request req;
1722
1723        if (via == NULL)
1724                return;
1725
1726        local_irq_disable();
1727
1728        drop_interrupts = 1;
1729
1730        if (pmu_kind != PMU_KEYLARGO_BASED) {
1731                pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
1732                                                PMU_INT_TICK );
1733                pmu_wait_complete(&req);
1734        } else {
1735                /* Disable server mode on shutdown or we'll just
1736                 * wake up again
1737                 */
1738                pmu_set_server_mode(0);
1739        }
1740
1741        pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
1742                    'M', 'A', 'T', 'T');
1743        pmu_wait_complete(&req);
1744        for (;;)
1745                ;
1746}
1747
1748int
1749pmu_present(void)
1750{
1751        return via != 0;
1752}
1753
1754#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
1755/*
1756 * Put the powerbook to sleep.
1757 */
1758 
1759static u32 save_via[8];
1760
1761static void
1762save_via_state(void)
1763{
1764        save_via[0] = in_8(&via[ANH]);
1765        save_via[1] = in_8(&via[DIRA]);
1766        save_via[2] = in_8(&via[B]);
1767        save_via[3] = in_8(&via[DIRB]);
1768        save_via[4] = in_8(&via[PCR]);
1769        save_via[5] = in_8(&via[ACR]);
1770        save_via[6] = in_8(&via[T1CL]);
1771        save_via[7] = in_8(&via[T1CH]);
1772}
1773static void
1774restore_via_state(void)
1775{
1776        out_8(&via[ANH], save_via[0]);
1777        out_8(&via[DIRA], save_via[1]);
1778        out_8(&via[B], save_via[2]);
1779        out_8(&via[DIRB], save_via[3]);
1780        out_8(&via[PCR], save_via[4]);
1781        out_8(&via[ACR], save_via[5]);
1782        out_8(&via[T1CL], save_via[6]);
1783        out_8(&via[T1CH], save_via[7]);
1784        out_8(&via[IER], IER_CLR | 0x7f);       /* disable all intrs */
1785        out_8(&via[IFR], 0x7f);                         /* clear IFR */
1786        out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
1787}
1788
1789#define GRACKLE_PM      (1<<7)
1790#define GRACKLE_DOZE    (1<<5)
1791#define GRACKLE_NAP     (1<<4)
1792#define GRACKLE_SLEEP   (1<<3)
1793
1794static int powerbook_sleep_grackle(void)
1795{
1796        unsigned long save_l2cr;
1797        unsigned short pmcr1;
1798        struct adb_request req;
1799        struct pci_dev *grackle;
1800
1801        grackle = pci_get_bus_and_slot(0, 0);
1802        if (!grackle)
1803                return -ENODEV;
1804
1805        /* Turn off various things. Darwin does some retry tests here... */
1806        pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
1807        pmu_wait_complete(&req);
1808        pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1809                PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1810        pmu_wait_complete(&req);
1811
1812        /* For 750, save backside cache setting and disable it */
1813        save_l2cr = _get_L2CR();        /* (returns -1 if not available) */
1814
1815        if (!__fake_sleep) {
1816                /* Ask the PMU to put us to sleep */
1817                pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1818                pmu_wait_complete(&req);
1819        }
1820
1821        /* The VIA is supposed not to be restored correctly*/
1822        save_via_state();
1823        /* We shut down some HW */
1824        pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
1825
1826        pci_read_config_word(grackle, 0x70, &pmcr1);
1827        /* Apparently, MacOS uses NAP mode for Grackle ??? */
1828        pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP); 
1829        pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
1830        pci_write_config_word(grackle, 0x70, pmcr1);
1831
1832        /* Call low-level ASM sleep handler */
1833        if (__fake_sleep)
1834                mdelay(5000);
1835        else
1836                low_sleep_handler();
1837
1838        /* We're awake again, stop grackle PM */
1839        pci_read_config_word(grackle, 0x70, &pmcr1);
1840        pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP); 
1841        pci_write_config_word(grackle, 0x70, pmcr1);
1842
1843        pci_dev_put(grackle);
1844
1845        /* Make sure the PMU is idle */
1846        pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
1847        restore_via_state();
1848        
1849        /* Restore L2 cache */
1850        if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1851                _set_L2CR(save_l2cr);
1852        
1853        /* Restore userland MMU context */
1854        switch_mmu_context(NULL, current->active_mm);
1855
1856        /* Power things up */
1857        pmu_unlock();
1858        pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1859        pmu_wait_complete(&req);
1860        pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
1861                        PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
1862        pmu_wait_complete(&req);
1863        pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
1864                        PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
1865        pmu_wait_complete(&req);
1866
1867        return 0;
1868}
1869
1870static int
1871powerbook_sleep_Core99(void)
1872{
1873        unsigned long save_l2cr;
1874        unsigned long save_l3cr;
1875        struct adb_request req;
1876        
1877        if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
1878                printk(KERN_ERR "Sleep mode not supported on this machine\n");
1879                return -ENOSYS;
1880        }
1881
1882        if (num_online_cpus() > 1 || cpu_is_offline(0))
1883                return -EAGAIN;
1884
1885        /* Stop environment and ADB interrupts */
1886        pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
1887        pmu_wait_complete(&req);
1888
1889        /* Tell PMU what events will wake us up */
1890        pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
1891                0xff, 0xff);
1892        pmu_wait_complete(&req);
1893        pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
1894                0, PMU_PWR_WAKEUP_KEY |
1895                (option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
1896        pmu_wait_complete(&req);
1897
1898        /* Save the state of the L2 and L3 caches */
1899        save_l3cr = _get_L3CR();        /* (returns -1 if not available) */
1900        save_l2cr = _get_L2CR();        /* (returns -1 if not available) */
1901
1902        if (!__fake_sleep) {
1903                /* Ask the PMU to put us to sleep */
1904                pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1905                pmu_wait_complete(&req);
1906        }
1907
1908        /* The VIA is supposed not to be restored correctly*/
1909        save_via_state();
1910
1911        /* Shut down various ASICs. There's a chance that we can no longer
1912         * talk to the PMU after this, so I moved it to _after_ sending the
1913         * sleep command to it. Still need to be checked.
1914         */
1915        pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
1916
1917        /* Call low-level ASM sleep handler */
1918        if (__fake_sleep)
1919                mdelay(5000);
1920        else
1921                low_sleep_handler();
1922
1923        /* Restore Apple core ASICs state */
1924        pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
1925
1926        /* Restore VIA */
1927        restore_via_state();
1928
1929        /* tweak LPJ before cpufreq is there */
1930        loops_per_jiffy *= 2;
1931
1932        /* Restore video */
1933        pmac_call_early_video_resume();
1934
1935        /* Restore L2 cache */
1936        if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
1937                _set_L2CR(save_l2cr);
1938        /* Restore L3 cache */
1939        if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
1940                _set_L3CR(save_l3cr);
1941        
1942        /* Restore userland MMU context */
1943        switch_mmu_context(NULL, current->active_mm);
1944
1945        /* Tell PMU we are ready */
1946        pmu_unlock();
1947        pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
1948        pmu_wait_complete(&req);
1949        pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
1950        pmu_wait_complete(&req);
1951
1952        /* Restore LPJ, cpufreq will adjust the cpu frequency */
1953        loops_per_jiffy /= 2;
1954
1955        return 0;
1956}
1957
1958#define PB3400_MEM_CTRL         0xf8000000
1959#define PB3400_MEM_CTRL_SLEEP   0x70
1960
1961static void __iomem *pb3400_mem_ctrl;
1962
1963static void powerbook_sleep_init_3400(void)
1964{
1965        /* map in the memory controller registers */
1966        pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
1967        if (pb3400_mem_ctrl == NULL)
1968                printk(KERN_WARNING "ioremap failed: sleep won't be possible");
1969}
1970
1971static int powerbook_sleep_3400(void)
1972{
1973        int i, x;
1974        unsigned int hid0;
1975        unsigned long msr;
1976        struct adb_request sleep_req;
1977        unsigned int __iomem *mem_ctrl_sleep;
1978
1979        if (pb3400_mem_ctrl == NULL)
1980                return -ENOMEM;
1981        mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
1982
1983        /* Set the memory controller to keep the memory refreshed
1984           while we're asleep */
1985        for (i = 0x403f; i >= 0x4000; --i) {
1986                out_be32(mem_ctrl_sleep, i);
1987                do {
1988                        x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
1989                } while (x == 0);
1990                if (x >= 0x100)
1991                        break;
1992        }
1993
1994        /* Ask the PMU to put us to sleep */
1995        pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
1996        pmu_wait_complete(&sleep_req);
1997        pmu_unlock();
1998
1999        pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
2000
2001        asleep = 1;
2002
2003        /* Put the CPU into sleep mode */
2004        hid0 = mfspr(SPRN_HID0);
2005        hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
2006        mtspr(SPRN_HID0, hid0);
2007        local_irq_enable();
2008        msr = mfmsr() | MSR_POW;
2009        while (asleep) {
2010                mb();
2011                mtmsr(msr);
2012                isync();
2013        }
2014        local_irq_disable();
2015
2016        /* OK, we're awake again, start restoring things */
2017        out_be32(mem_ctrl_sleep, 0x3f);
2018        pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
2019
2020        return 0;
2021}
2022
2023#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2024
2025/*
2026 * Support for /dev/pmu device
2027 */
2028#define RB_SIZE         0x10
2029struct pmu_private {
2030        struct list_head list;
2031        int     rb_get;
2032        int     rb_put;
2033        struct rb_entry {
2034                unsigned short len;
2035                unsigned char data[16];
2036        }       rb_buf[RB_SIZE];
2037        wait_queue_head_t wait;
2038        spinlock_t lock;
2039#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2040        int     backlight_locker;
2041#endif
2042};
2043
2044static LIST_HEAD(all_pmu_pvt);
2045static DEFINE_SPINLOCK(all_pvt_lock);
2046
2047static void
2048pmu_pass_intr(unsigned char *data, int len)
2049{
2050        struct pmu_private *pp;
2051        struct list_head *list;
2052        int i;
2053        unsigned long flags;
2054
2055        if (len > sizeof(pp->rb_buf[0].data))
2056                len = sizeof(pp->rb_buf[0].data);
2057        spin_lock_irqsave(&all_pvt_lock, flags);
2058        for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
2059                pp = list_entry(list, struct pmu_private, list);
2060                spin_lock(&pp->lock);
2061                i = pp->rb_put + 1;
2062                if (i >= RB_SIZE)
2063                        i = 0;
2064                if (i != pp->rb_get) {
2065                        struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
2066                        rp->len = len;
2067                        memcpy(rp->data, data, len);
2068                        pp->rb_put = i;
2069                        wake_up_interruptible(&pp->wait);
2070                }
2071                spin_unlock(&pp->lock);
2072        }
2073        spin_unlock_irqrestore(&all_pvt_lock, flags);
2074}
2075
2076static int
2077pmu_open(struct inode *inode, struct file *file)
2078{
2079        struct pmu_private *pp;
2080        unsigned long flags;
2081
2082        pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
2083        if (pp == 0)
2084                return -ENOMEM;
2085        pp->rb_get = pp->rb_put = 0;
2086        spin_lock_init(&pp->lock);
2087        init_waitqueue_head(&pp->wait);
2088        mutex_lock(&pmu_info_proc_mutex);
2089        spin_lock_irqsave(&all_pvt_lock, flags);
2090#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2091        pp->backlight_locker = 0;
2092#endif
2093        list_add(&pp->list, &all_pmu_pvt);
2094        spin_unlock_irqrestore(&all_pvt_lock, flags);
2095        file->private_data = pp;
2096        mutex_unlock(&pmu_info_proc_mutex);
2097        return 0;
2098}
2099
2100static ssize_t 
2101pmu_read(struct file *file, char __user *buf,
2102                        size_t count, loff_t *ppos)
2103{
2104        struct pmu_private *pp = file->private_data;
2105        DECLARE_WAITQUEUE(wait, current);
2106        unsigned long flags;
2107        int ret = 0;
2108
2109        if (count < 1 || pp == 0)
2110                return -EINVAL;
2111        if (!access_ok(VERIFY_WRITE, buf, count))
2112                return -EFAULT;
2113
2114        spin_lock_irqsave(&pp->lock, flags);
2115        add_wait_queue(&pp->wait, &wait);
2116        set_current_state(TASK_INTERRUPTIBLE);
2117
2118        for (;;) {
2119                ret = -EAGAIN;
2120                if (pp->rb_get != pp->rb_put) {
2121                        int i = pp->rb_get;
2122                        struct rb_entry *rp = &pp->rb_buf[i];
2123                        ret = rp->len;
2124                        spin_unlock_irqrestore(&pp->lock, flags);
2125                        if (ret > count)
2126                                ret = count;
2127                        if (ret > 0 && copy_to_user(buf, rp->data, ret))
2128                                ret = -EFAULT;
2129                        if (++i >= RB_SIZE)
2130                                i = 0;
2131                        spin_lock_irqsave(&pp->lock, flags);
2132                        pp->rb_get = i;
2133                }
2134                if (ret >= 0)
2135                        break;
2136                if (file->f_flags & O_NONBLOCK)
2137                        break;
2138                ret = -ERESTARTSYS;
2139                if (signal_pending(current))
2140                        break;
2141                spin_unlock_irqrestore(&pp->lock, flags);
2142                schedule();
2143                spin_lock_irqsave(&pp->lock, flags);
2144        }
2145        __set_current_state(TASK_RUNNING);
2146        remove_wait_queue(&pp->wait, &wait);
2147        spin_unlock_irqrestore(&pp->lock, flags);
2148        
2149        return ret;
2150}
2151
2152static ssize_t
2153pmu_write(struct file *file, const char __user *buf,
2154                         size_t count, loff_t *ppos)
2155{
2156        return 0;
2157}
2158
2159static unsigned int
2160pmu_fpoll(struct file *filp, poll_table *wait)
2161{
2162        struct pmu_private *pp = filp->private_data;
2163        unsigned int mask = 0;
2164        unsigned long flags;
2165        
2166        if (pp == 0)
2167                return 0;
2168        poll_wait(filp, &pp->wait, wait);
2169        spin_lock_irqsave(&pp->lock, flags);
2170        if (pp->rb_get != pp->rb_put)
2171                mask |= POLLIN;
2172        spin_unlock_irqrestore(&pp->lock, flags);
2173        return mask;
2174}
2175
2176static int
2177pmu_release(struct inode *inode, struct file *file)
2178{
2179        struct pmu_private *pp = file->private_data;
2180        unsigned long flags;
2181
2182        if (pp != 0) {
2183                file->private_data = NULL;
2184                spin_lock_irqsave(&all_pvt_lock, flags);
2185                list_del(&pp->list);
2186                spin_unlock_irqrestore(&all_pvt_lock, flags);
2187
2188#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
2189                if (pp->backlight_locker)
2190                        pmac_backlight_enable();
2191#endif
2192
2193                kfree(pp);
2194        }
2195        return 0;
2196}
2197
2198#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2199static void pmac_suspend_disable_irqs(void)
2200{
2201        /* Call platform functions marked "on sleep" */
2202        pmac_pfunc_i2c_suspend();
2203        pmac_pfunc_base_suspend();
2204}
2205
2206static int powerbook_sleep(suspend_state_t state)
2207{
2208        int error = 0;
2209
2210        /* Wait for completion of async requests */
2211        while (!batt_req.complete)
2212                pmu_poll();
2213
2214        /* Giveup the lazy FPU & vec so we don't have to back them
2215         * up from the low level code
2216         */
2217        enable_kernel_fp();
2218
2219#ifdef CONFIG_ALTIVEC
2220        if (cpu_has_feature(CPU_FTR_ALTIVEC))
2221                enable_kernel_altivec();
2222#endif /* CONFIG_ALTIVEC */
2223
2224        switch (pmu_kind) {
2225        case PMU_OHARE_BASED:
2226                error = powerbook_sleep_3400();
2227                break;
2228        case PMU_HEATHROW_BASED:
2229        case PMU_PADDINGTON_BASED:
2230                error = powerbook_sleep_grackle();
2231                break;
2232        case PMU_KEYLARGO_BASED:
2233                error = powerbook_sleep_Core99();
2234                break;
2235        default:
2236                return -ENOSYS;
2237        }
2238
2239        if (error)
2240                return error;
2241
2242        mdelay(100);
2243
2244        return 0;
2245}
2246
2247static void pmac_suspend_enable_irqs(void)
2248{
2249        /* Force a poll of ADB interrupts */
2250        adb_int_pending = 1;
2251        via_pmu_interrupt(0, NULL);
2252
2253        mdelay(10);
2254
2255        /* Call platform functions marked "on wake" */
2256        pmac_pfunc_base_resume();
2257        pmac_pfunc_i2c_resume();
2258}
2259
2260static int pmu_sleep_valid(suspend_state_t state)
2261{
2262        return state == PM_SUSPEND_MEM
2263                && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
2264}
2265
2266static const struct platform_suspend_ops pmu_pm_ops = {
2267        .enter = powerbook_sleep,
2268        .valid = pmu_sleep_valid,
2269};
2270
2271static int register_pmu_pm_ops(void)
2272{
2273        if (pmu_kind == PMU_OHARE_BASED)
2274                powerbook_sleep_init_3400();
2275        ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs;
2276        ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs;
2277        suspend_set_ops(&pmu_pm_ops);
2278
2279        return 0;
2280}
2281
2282device_initcall(register_pmu_pm_ops);
2283#endif
2284
2285static int pmu_ioctl(struct file *filp,
2286                     u_int cmd, u_long arg)
2287{
2288        __u32 __user *argp = (__u32 __user *)arg;
2289        int error = -EINVAL;
2290
2291        switch (cmd) {
2292        case PMU_IOC_SLEEP:
2293                if (!capable(CAP_SYS_ADMIN))
2294                        return -EACCES;
2295                return pm_suspend(PM_SUSPEND_MEM);
2296        case PMU_IOC_CAN_SLEEP:
2297                if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0)
2298                        return put_user(0, argp);
2299                else
2300                        return put_user(1, argp);
2301
2302#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
2303        /* Compatibility ioctl's for backlight */
2304        case PMU_IOC_GET_BACKLIGHT:
2305        {
2306                int brightness;
2307
2308                brightness = pmac_backlight_get_legacy_brightness();
2309                if (brightness < 0)
2310                        return brightness;
2311                else
2312                        return put_user(brightness, argp);
2313
2314        }
2315        case PMU_IOC_SET_BACKLIGHT:
2316        {
2317                int brightness;
2318
2319                error = get_user(brightness, argp);
2320                if (error)
2321                        return error;
2322
2323                return pmac_backlight_set_legacy_brightness(brightness);
2324        }
2325#ifdef CONFIG_INPUT_ADBHID
2326        case PMU_IOC_GRAB_BACKLIGHT: {
2327                struct pmu_private *pp = filp->private_data;
2328
2329                if (pp->backlight_locker)
2330                        return 0;
2331
2332                pp->backlight_locker = 1;
2333                pmac_backlight_disable();
2334
2335                return 0;
2336        }
2337#endif /* CONFIG_INPUT_ADBHID */
2338#endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */
2339
2340        case PMU_IOC_GET_MODEL:
2341                return put_user(pmu_kind, argp);
2342        case PMU_IOC_HAS_ADB:
2343                return put_user(pmu_has_adb, argp);
2344        }
2345        return error;
2346}
2347
2348static long pmu_unlocked_ioctl(struct file *filp,
2349                               u_int cmd, u_long arg)
2350{
2351        int ret;
2352
2353        mutex_lock(&pmu_info_proc_mutex);
2354        ret = pmu_ioctl(filp, cmd, arg);
2355        mutex_unlock(&pmu_info_proc_mutex);
2356
2357        return ret;
2358}
2359
2360#ifdef CONFIG_COMPAT
2361#define PMU_IOC_GET_BACKLIGHT32 _IOR('B', 1, compat_size_t)
2362#define PMU_IOC_SET_BACKLIGHT32 _IOW('B', 2, compat_size_t)
2363#define PMU_IOC_GET_MODEL32     _IOR('B', 3, compat_size_t)
2364#define PMU_IOC_HAS_ADB32       _IOR('B', 4, compat_size_t)
2365#define PMU_IOC_CAN_SLEEP32     _IOR('B', 5, compat_size_t)
2366#define PMU_IOC_GRAB_BACKLIGHT32 _IOR('B', 6, compat_size_t)
2367
2368static long compat_pmu_ioctl (struct file *filp, u_int cmd, u_long arg)
2369{
2370        switch (cmd) {
2371        case PMU_IOC_SLEEP:
2372                break;
2373        case PMU_IOC_GET_BACKLIGHT32:
2374                cmd = PMU_IOC_GET_BACKLIGHT;
2375                break;
2376        case PMU_IOC_SET_BACKLIGHT32:
2377                cmd = PMU_IOC_SET_BACKLIGHT;
2378                break;
2379        case PMU_IOC_GET_MODEL32:
2380                cmd = PMU_IOC_GET_MODEL;
2381                break;
2382        case PMU_IOC_HAS_ADB32:
2383                cmd = PMU_IOC_HAS_ADB;
2384                break;
2385        case PMU_IOC_CAN_SLEEP32:
2386                cmd = PMU_IOC_CAN_SLEEP;
2387                break;
2388        case PMU_IOC_GRAB_BACKLIGHT32:
2389                cmd = PMU_IOC_GRAB_BACKLIGHT;
2390                break;
2391        default:
2392                return -ENOIOCTLCMD;
2393        }
2394        return pmu_unlocked_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
2395}
2396#endif
2397
2398static const struct file_operations pmu_device_fops = {
2399        .read           = pmu_read,
2400        .write          = pmu_write,
2401        .poll           = pmu_fpoll,
2402        .unlocked_ioctl = pmu_unlocked_ioctl,
2403#ifdef CONFIG_COMPAT
2404        .compat_ioctl   = compat_pmu_ioctl,
2405#endif
2406        .open           = pmu_open,
2407        .release        = pmu_release,
2408        .llseek         = noop_llseek,
2409};
2410
2411static struct miscdevice pmu_device = {
2412        PMU_MINOR, "pmu", &pmu_device_fops
2413};
2414
2415static int pmu_device_init(void)
2416{
2417        if (!via)
2418                return 0;
2419        if (misc_register(&pmu_device) < 0)
2420                printk(KERN_ERR "via-pmu: cannot register misc device.\n");
2421        return 0;
2422}
2423device_initcall(pmu_device_init);
2424
2425
2426#ifdef DEBUG_SLEEP
2427static inline void 
2428polled_handshake(volatile unsigned char __iomem *via)
2429{
2430        via[B] &= ~TREQ; eieio();
2431        while ((via[B] & TACK) != 0)
2432                ;
2433        via[B] |= TREQ; eieio();
2434        while ((via[B] & TACK) == 0)
2435                ;
2436}
2437
2438static inline void 
2439polled_send_byte(volatile unsigned char __iomem *via, int x)
2440{
2441        via[ACR] |= SR_OUT | SR_EXT; eieio();
2442        via[SR] = x; eieio();
2443        polled_handshake(via);
2444}
2445
2446static inline int
2447polled_recv_byte(volatile unsigned char __iomem *via)
2448{
2449        int x;
2450
2451        via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
2452        x = via[SR]; eieio();
2453        polled_handshake(via);
2454        x = via[SR]; eieio();
2455        return x;
2456}
2457
2458int
2459pmu_polled_request(struct adb_request *req)
2460{
2461        unsigned long flags;
2462        int i, l, c;
2463        volatile unsigned char __iomem *v = via;
2464
2465        req->complete = 1;
2466        c = req->data[0];
2467        l = pmu_data_len[c][0];
2468        if (l >= 0 && req->nbytes != l + 1)
2469                return -EINVAL;
2470
2471        local_irq_save(flags);
2472        while (pmu_state != idle)
2473                pmu_poll();
2474
2475        while ((via[B] & TACK) == 0)
2476                ;
2477        polled_send_byte(v, c);
2478        if (l < 0) {
2479                l = req->nbytes - 1;
2480                polled_send_byte(v, l);
2481        }
2482        for (i = 1; i <= l; ++i)
2483                polled_send_byte(v, req->data[i]);
2484
2485        l = pmu_data_len[c][1];
2486        if (l < 0)
2487                l = polled_recv_byte(v);
2488        for (i = 0; i < l; ++i)
2489                req->reply[i + req->reply_len] = polled_recv_byte(v);
2490
2491        if (req->done)
2492                (*req->done)(req);
2493
2494        local_irq_restore(flags);
2495        return 0;
2496}
2497
2498/* N.B. This doesn't work on the 3400 */
2499void pmu_blink(int n)
2500{
2501        struct adb_request req;
2502
2503        memset(&req, 0, sizeof(req));
2504
2505        for (; n > 0; --n) {
2506                req.nbytes = 4;
2507                req.done = NULL;
2508                req.data[0] = 0xee;
2509                req.data[1] = 4;
2510                req.data[2] = 0;
2511                req.data[3] = 1;
2512                req.reply[0] = ADB_RET_OK;
2513                req.reply_len = 1;
2514                req.reply_expected = 0;
2515                pmu_polled_request(&req);
2516                mdelay(50);
2517                req.nbytes = 4;
2518                req.done = NULL;
2519                req.data[0] = 0xee;
2520                req.data[1] = 4;
2521                req.data[2] = 0;
2522                req.data[3] = 0;
2523                req.reply[0] = ADB_RET_OK;
2524                req.reply_len = 1;
2525                req.reply_expected = 0;
2526                pmu_polled_request(&req);
2527                mdelay(50);
2528        }
2529        mdelay(50);
2530}
2531#endif /* DEBUG_SLEEP */
2532
2533#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
2534int pmu_sys_suspended;
2535
2536static int pmu_syscore_suspend(void)
2537{
2538        /* Suspend PMU event interrupts */
2539        pmu_suspend();
2540        pmu_sys_suspended = 1;
2541
2542#ifdef CONFIG_PMAC_BACKLIGHT
2543        /* Tell backlight code not to muck around with the chip anymore */
2544        pmu_backlight_set_sleep(1);
2545#endif
2546
2547        return 0;
2548}
2549
2550static void pmu_syscore_resume(void)
2551{
2552        struct adb_request req;
2553
2554        if (!pmu_sys_suspended)
2555                return;
2556
2557        /* Tell PMU we are ready */
2558        pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
2559        pmu_wait_complete(&req);
2560
2561#ifdef CONFIG_PMAC_BACKLIGHT
2562        /* Tell backlight code it can use the chip again */
2563        pmu_backlight_set_sleep(0);
2564#endif
2565        /* Resume PMU event interrupts */
2566        pmu_resume();
2567        pmu_sys_suspended = 0;
2568}
2569
2570static struct syscore_ops pmu_syscore_ops = {
2571        .suspend = pmu_syscore_suspend,
2572        .resume = pmu_syscore_resume,
2573};
2574
2575static int pmu_syscore_register(void)
2576{
2577        register_syscore_ops(&pmu_syscore_ops);
2578
2579        return 0;
2580}
2581subsys_initcall(pmu_syscore_register);
2582#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2583
2584EXPORT_SYMBOL(pmu_request);
2585EXPORT_SYMBOL(pmu_queue_request);
2586EXPORT_SYMBOL(pmu_poll);
2587EXPORT_SYMBOL(pmu_poll_adb);
2588EXPORT_SYMBOL(pmu_wait_complete);
2589EXPORT_SYMBOL(pmu_suspend);
2590EXPORT_SYMBOL(pmu_resume);
2591EXPORT_SYMBOL(pmu_unlock);
2592#if defined(CONFIG_PPC32)
2593EXPORT_SYMBOL(pmu_enable_irled);
2594EXPORT_SYMBOL(pmu_battery_count);
2595EXPORT_SYMBOL(pmu_batteries);
2596EXPORT_SYMBOL(pmu_power_flags);
2597#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
2598
2599