linux/drivers/media/radio/radio-sf16fmi.c
<<
>>
Prefs
   1/* SF16-FMI, SF16-FMP and SF16-FMD radio driver for Linux radio support
   2 * heavily based on rtrack driver...
   3 * (c) 1997 M. Kirkwood
   4 * (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz
   5 *
   6 * Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk>
   7 * Made working and cleaned up functions <mikael.hedin@irf.se>
   8 * Support for ISAPnP by Ladislav Michl <ladis@psi.cz>
   9 *
  10 * Notes on the hardware
  11 *
  12 *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
  13 *  No volume control - only mute/unmute - you have to use line volume
  14 *  control on SB-part of SF16-FMI/SF16-FMP/SF16-FMD
  15 *
  16 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
  17 */
  18
  19#include <linux/kernel.h>       /* __setup                      */
  20#include <linux/module.h>       /* Modules                      */
  21#include <linux/init.h>         /* Initdata                     */
  22#include <linux/ioport.h>       /* request_region               */
  23#include <linux/delay.h>        /* udelay                       */
  24#include <linux/isapnp.h>
  25#include <linux/mutex.h>
  26#include <linux/videodev2.h>    /* kernel radio structs         */
  27#include <linux/io.h>           /* outb, outb_p                 */
  28#include <media/v4l2-device.h>
  29#include <media/v4l2-ioctl.h>
  30#include <media/v4l2-ctrls.h>
  31#include <media/v4l2-event.h>
  32#include "lm7000.h"
  33
  34MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
  35MODULE_DESCRIPTION("A driver for the SF16-FMI, SF16-FMP and SF16-FMD radio.");
  36MODULE_LICENSE("GPL");
  37MODULE_VERSION("0.0.3");
  38
  39static int io = -1;
  40static int radio_nr = -1;
  41
  42module_param(io, int, 0);
  43MODULE_PARM_DESC(io, "I/O address of the SF16-FMI/SF16-FMP/SF16-FMD card (0x284 or 0x384)");
  44module_param(radio_nr, int, 0);
  45
  46struct fmi
  47{
  48        struct v4l2_device v4l2_dev;
  49        struct v4l2_ctrl_handler hdl;
  50        struct video_device vdev;
  51        int io;
  52        bool mute;
  53        u32 curfreq; /* freq in kHz */
  54        struct mutex lock;
  55};
  56
  57static struct fmi fmi_card;
  58static struct pnp_dev *dev;
  59static bool pnp_attached;
  60
  61#define RSF16_MINFREQ (87U * 16000)
  62#define RSF16_MAXFREQ (108U * 16000)
  63
  64#define FMI_BIT_TUN_CE          (1 << 0)
  65#define FMI_BIT_TUN_CLK         (1 << 1)
  66#define FMI_BIT_TUN_DATA        (1 << 2)
  67#define FMI_BIT_VOL_SW          (1 << 3)
  68#define FMI_BIT_TUN_STRQ        (1 << 4)
  69
  70static void fmi_set_pins(void *handle, u8 pins)
  71{
  72        struct fmi *fmi = handle;
  73        u8 bits = FMI_BIT_TUN_STRQ;
  74
  75        if (!fmi->mute)
  76                bits |= FMI_BIT_VOL_SW;
  77
  78        if (pins & LM7000_DATA)
  79                bits |= FMI_BIT_TUN_DATA;
  80        if (pins & LM7000_CLK)
  81                bits |= FMI_BIT_TUN_CLK;
  82        if (pins & LM7000_CE)
  83                bits |= FMI_BIT_TUN_CE;
  84
  85        mutex_lock(&fmi->lock);
  86        outb_p(bits, fmi->io);
  87        mutex_unlock(&fmi->lock);
  88}
  89
  90static inline void fmi_mute(struct fmi *fmi)
  91{
  92        mutex_lock(&fmi->lock);
  93        outb(0x00, fmi->io);
  94        mutex_unlock(&fmi->lock);
  95}
  96
  97static inline void fmi_unmute(struct fmi *fmi)
  98{
  99        mutex_lock(&fmi->lock);
 100        outb(0x08, fmi->io);
 101        mutex_unlock(&fmi->lock);
 102}
 103
 104static inline int fmi_getsigstr(struct fmi *fmi)
 105{
 106        int val;
 107        int res;
 108
 109        mutex_lock(&fmi->lock);
 110        val = fmi->mute ? 0x00 : 0x08;  /* mute/unmute */
 111        outb(val, fmi->io);
 112        outb(val | 0x10, fmi->io);
 113        msleep(143);            /* was schedule_timeout(HZ/7) */
 114        res = (int)inb(fmi->io + 1);
 115        outb(val, fmi->io);
 116
 117        mutex_unlock(&fmi->lock);
 118        return (res & 2) ? 0 : 0xFFFF;
 119}
 120
 121static void fmi_set_freq(struct fmi *fmi)
 122{
 123        fmi->curfreq = clamp(fmi->curfreq, RSF16_MINFREQ, RSF16_MAXFREQ);
 124        /* rounding in steps of 800 to match the freq
 125           that will be used */
 126        lm7000_set_freq((fmi->curfreq / 800) * 800, fmi, fmi_set_pins);
 127}
 128
 129static int vidioc_querycap(struct file *file, void  *priv,
 130                                        struct v4l2_capability *v)
 131{
 132        strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
 133        strlcpy(v->card, "SF16-FMI/FMP/FMD radio", sizeof(v->card));
 134        strlcpy(v->bus_info, "ISA:radio-sf16fmi", sizeof(v->bus_info));
 135        v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 136        v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
 137        return 0;
 138}
 139
 140static int vidioc_g_tuner(struct file *file, void *priv,
 141                                        struct v4l2_tuner *v)
 142{
 143        struct fmi *fmi = video_drvdata(file);
 144
 145        if (v->index > 0)
 146                return -EINVAL;
 147
 148        strlcpy(v->name, "FM", sizeof(v->name));
 149        v->type = V4L2_TUNER_RADIO;
 150        v->rangelow = RSF16_MINFREQ;
 151        v->rangehigh = RSF16_MAXFREQ;
 152        v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 153        v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
 154        v->audmode = V4L2_TUNER_MODE_STEREO;
 155        v->signal = fmi_getsigstr(fmi);
 156        return 0;
 157}
 158
 159static int vidioc_s_tuner(struct file *file, void *priv,
 160                                        const struct v4l2_tuner *v)
 161{
 162        return v->index ? -EINVAL : 0;
 163}
 164
 165static int vidioc_s_frequency(struct file *file, void *priv,
 166                                        const struct v4l2_frequency *f)
 167{
 168        struct fmi *fmi = video_drvdata(file);
 169
 170        if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
 171                return -EINVAL;
 172
 173        fmi->curfreq = f->frequency;
 174        fmi_set_freq(fmi);
 175
 176        return 0;
 177}
 178
 179static int vidioc_g_frequency(struct file *file, void *priv,
 180                                        struct v4l2_frequency *f)
 181{
 182        struct fmi *fmi = video_drvdata(file);
 183
 184        if (f->tuner != 0)
 185                return -EINVAL;
 186        f->type = V4L2_TUNER_RADIO;
 187        f->frequency = fmi->curfreq;
 188        return 0;
 189}
 190
 191static int fmi_s_ctrl(struct v4l2_ctrl *ctrl)
 192{
 193        struct fmi *fmi = container_of(ctrl->handler, struct fmi, hdl);
 194
 195        switch (ctrl->id) {
 196        case V4L2_CID_AUDIO_MUTE:
 197                if (ctrl->val)
 198                        fmi_mute(fmi);
 199                else
 200                        fmi_unmute(fmi);
 201                fmi->mute = ctrl->val;
 202                return 0;
 203        }
 204        return -EINVAL;
 205}
 206
 207static const struct v4l2_ctrl_ops fmi_ctrl_ops = {
 208        .s_ctrl = fmi_s_ctrl,
 209};
 210
 211static const struct v4l2_file_operations fmi_fops = {
 212        .owner          = THIS_MODULE,
 213        .open           = v4l2_fh_open,
 214        .release        = v4l2_fh_release,
 215        .poll           = v4l2_ctrl_poll,
 216        .unlocked_ioctl = video_ioctl2,
 217};
 218
 219static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
 220        .vidioc_querycap    = vidioc_querycap,
 221        .vidioc_g_tuner     = vidioc_g_tuner,
 222        .vidioc_s_tuner     = vidioc_s_tuner,
 223        .vidioc_g_frequency = vidioc_g_frequency,
 224        .vidioc_s_frequency = vidioc_s_frequency,
 225        .vidioc_log_status  = v4l2_ctrl_log_status,
 226        .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 227        .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 228};
 229
 230/* ladis: this is my card. does any other types exist? */
 231static struct isapnp_device_id id_table[] = {
 232                /* SF16-FMI */
 233        {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
 234                ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0},
 235                /* SF16-FMD */
 236        {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
 237                ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad12), 0},
 238        {       ISAPNP_CARD_END, },
 239};
 240
 241MODULE_DEVICE_TABLE(isapnp, id_table);
 242
 243static int __init isapnp_fmi_probe(void)
 244{
 245        int i = 0;
 246
 247        while (id_table[i].card_vendor != 0 && dev == NULL) {
 248                dev = pnp_find_dev(NULL, id_table[i].vendor,
 249                                   id_table[i].function, NULL);
 250                i++;
 251        }
 252
 253        if (!dev)
 254                return -ENODEV;
 255        if (pnp_device_attach(dev) < 0)
 256                return -EAGAIN;
 257        if (pnp_activate_dev(dev) < 0) {
 258                printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
 259                pnp_device_detach(dev);
 260                return -ENOMEM;
 261        }
 262        if (!pnp_port_valid(dev, 0)) {
 263                pnp_device_detach(dev);
 264                return -ENODEV;
 265        }
 266
 267        i = pnp_port_start(dev, 0);
 268        printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);
 269
 270        return i;
 271}
 272
 273static int __init fmi_init(void)
 274{
 275        struct fmi *fmi = &fmi_card;
 276        struct v4l2_device *v4l2_dev = &fmi->v4l2_dev;
 277        struct v4l2_ctrl_handler *hdl = &fmi->hdl;
 278        int res, i;
 279        int probe_ports[] = { 0, 0x284, 0x384 };
 280
 281        if (io < 0) {
 282                for (i = 0; i < ARRAY_SIZE(probe_ports); i++) {
 283                        io = probe_ports[i];
 284                        if (io == 0) {
 285                                io = isapnp_fmi_probe();
 286                                if (io < 0)
 287                                        continue;
 288                                pnp_attached = true;
 289                        }
 290                        if (!request_region(io, 2, "radio-sf16fmi")) {
 291                                if (pnp_attached)
 292                                        pnp_device_detach(dev);
 293                                io = -1;
 294                                continue;
 295                        }
 296                        if (pnp_attached ||
 297                            ((inb(io) & 0xf9) == 0xf9 && (inb(io) & 0x4) == 0))
 298                                break;
 299                        release_region(io, 2);
 300                        io = -1;
 301                }
 302        } else {
 303                if (!request_region(io, 2, "radio-sf16fmi")) {
 304                        printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io);
 305                        return -EBUSY;
 306                }
 307                if (inb(io) == 0xff) {
 308                        printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io);
 309                        release_region(io, 2);
 310                        return -ENODEV;
 311                }
 312        }
 313        if (io < 0) {
 314                printk(KERN_ERR "radio-sf16fmi: no cards found\n");
 315                return -ENODEV;
 316        }
 317
 318        strlcpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name));
 319        fmi->io = io;
 320
 321        res = v4l2_device_register(NULL, v4l2_dev);
 322        if (res < 0) {
 323                release_region(fmi->io, 2);
 324                if (pnp_attached)
 325                        pnp_device_detach(dev);
 326                v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
 327                return res;
 328        }
 329
 330        v4l2_ctrl_handler_init(hdl, 1);
 331        v4l2_ctrl_new_std(hdl, &fmi_ctrl_ops,
 332                        V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
 333        v4l2_dev->ctrl_handler = hdl;
 334        if (hdl->error) {
 335                res = hdl->error;
 336                v4l2_err(v4l2_dev, "Could not register controls\n");
 337                v4l2_ctrl_handler_free(hdl);
 338                v4l2_device_unregister(v4l2_dev);
 339                return res;
 340        }
 341
 342        strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
 343        fmi->vdev.v4l2_dev = v4l2_dev;
 344        fmi->vdev.fops = &fmi_fops;
 345        fmi->vdev.ioctl_ops = &fmi_ioctl_ops;
 346        fmi->vdev.release = video_device_release_empty;
 347        video_set_drvdata(&fmi->vdev, fmi);
 348
 349        mutex_init(&fmi->lock);
 350
 351        /* mute card and set default frequency */
 352        fmi->mute = true;
 353        fmi->curfreq = RSF16_MINFREQ;
 354        fmi_set_freq(fmi);
 355
 356        if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 357                v4l2_ctrl_handler_free(hdl);
 358                v4l2_device_unregister(v4l2_dev);
 359                release_region(fmi->io, 2);
 360                if (pnp_attached)
 361                        pnp_device_detach(dev);
 362                return -EINVAL;
 363        }
 364
 365        v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
 366        return 0;
 367}
 368
 369static void __exit fmi_exit(void)
 370{
 371        struct fmi *fmi = &fmi_card;
 372
 373        v4l2_ctrl_handler_free(&fmi->hdl);
 374        video_unregister_device(&fmi->vdev);
 375        v4l2_device_unregister(&fmi->v4l2_dev);
 376        release_region(fmi->io, 2);
 377        if (dev && pnp_attached)
 378                pnp_device_detach(dev);
 379}
 380
 381module_init(fmi_init);
 382module_exit(fmi_exit);
 383