1/* 2 * Intel MIC Platform Software Stack (MPSS) 3 * 4 * Copyright(c) 2013 Intel Corporation. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License, version 2, as 8 * published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * General Public License for more details. 14 * 15 * The full GNU General Public License is included in this distribution in 16 * the file called "COPYING". 17 * 18 * Intel MIC Host driver. 19 * 20 */ 21#ifndef _MIC_DEVICE_H_ 22#define _MIC_DEVICE_H_ 23 24#include <linux/cdev.h> 25#include <linux/idr.h> 26#include <linux/notifier.h> 27#include <linux/irqreturn.h> 28#include <linux/dmaengine.h> 29#include <linux/miscdevice.h> 30#include <linux/mic_bus.h> 31#include "../bus/scif_bus.h" 32#include "../bus/vop_bus.h" 33#include "../bus/cosm_bus.h" 34#include "mic_intr.h" 35 36/** 37 * enum mic_stepping - MIC stepping ids. 38 */ 39enum mic_stepping { 40 MIC_A0_STEP = 0x0, 41 MIC_B0_STEP = 0x10, 42 MIC_B1_STEP = 0x11, 43 MIC_C0_STEP = 0x20, 44}; 45 46extern struct cosm_hw_ops cosm_hw_ops; 47 48/** 49 * struct mic_device - MIC device information for each card. 50 * 51 * @mmio: MMIO bar information. 52 * @aper: Aperture bar information. 53 * @family: The MIC family to which this device belongs. 54 * @ops: MIC HW specific operations. 55 * @id: The unique device id for this MIC device. 56 * @stepping: Stepping ID. 57 * @pdev: Underlying PCI device. 58 * @mic_mutex: Mutex for synchronizing access to mic_device. 59 * @intr_ops: HW specific interrupt operations. 60 * @smpt_ops: Hardware specific SMPT operations. 61 * @smpt: MIC SMPT information. 62 * @intr_info: H/W specific interrupt information. 63 * @irq_info: The OS specific irq information 64 * @dbg_dir: debugfs directory of this MIC device. 65 * @bootaddr: MIC boot address. 66 * @dp: virtio device page 67 * @dp_dma_addr: virtio device page DMA address. 68 * @dma_mbdev: MIC BUS DMA device. 69 * @dma_ch - Array of DMA channels 70 * @num_dma_ch - Number of DMA channels available 71 * @scdev: SCIF device on the SCIF virtual bus. 72 * @vpdev: Virtio over PCIe device on the VOP virtual bus. 73 * @cosm_dev: COSM device 74 */ 75struct mic_device { 76 struct mic_mw mmio; 77 struct mic_mw aper; 78 enum mic_hw_family family; 79 struct mic_hw_ops *ops; 80 int id; 81 enum mic_stepping stepping; 82 struct pci_dev *pdev; 83 struct mutex mic_mutex; 84 struct mic_hw_intr_ops *intr_ops; 85 struct mic_smpt_ops *smpt_ops; 86 struct mic_smpt_info *smpt; 87 struct mic_intr_info *intr_info; 88 struct mic_irq_info irq_info; 89 struct dentry *dbg_dir; 90 u32 bootaddr; 91 void *dp; 92 dma_addr_t dp_dma_addr; 93 struct mbus_device *dma_mbdev; 94 struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN]; 95 int num_dma_ch; 96 struct scif_hw_dev *scdev; 97 struct vop_device *vpdev; 98 struct cosm_device *cosm_dev; 99}; 100 101/** 102 * struct mic_hw_ops - MIC HW specific operations. 103 * @aper_bar: Aperture bar resource number. 104 * @mmio_bar: MMIO bar resource number. 105 * @read_spad: Read from scratch pad register. 106 * @write_spad: Write to scratch pad register. 107 * @send_intr: Send an interrupt for a particular doorbell on the card. 108 * @ack_interrupt: Hardware specific operations to ack the h/w on 109 * receipt of an interrupt. 110 * @intr_workarounds: Hardware specific workarounds needed after 111 * handling an interrupt. 112 * @reset: Reset the remote processor. 113 * @reset_fw_ready: Reset firmware ready field. 114 * @is_fw_ready: Check if firmware is ready for OS download. 115 * @send_firmware_intr: Send an interrupt to the card firmware. 116 * @load_mic_fw: Load firmware segments required to boot the card 117 * into card memory. This includes the kernel, command line, ramdisk etc. 118 * @get_postcode: Get post code status from firmware. 119 * @dma_filter: DMA filter function to be used. 120 */ 121struct mic_hw_ops { 122 u8 aper_bar; 123 u8 mmio_bar; 124 u32 (*read_spad)(struct mic_device *mdev, unsigned int idx); 125 void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val); 126 void (*send_intr)(struct mic_device *mdev, int doorbell); 127 u32 (*ack_interrupt)(struct mic_device *mdev); 128 void (*intr_workarounds)(struct mic_device *mdev); 129 void (*reset)(struct mic_device *mdev); 130 void (*reset_fw_ready)(struct mic_device *mdev); 131 bool (*is_fw_ready)(struct mic_device *mdev); 132 void (*send_firmware_intr)(struct mic_device *mdev); 133 int (*load_mic_fw)(struct mic_device *mdev, const char *buf); 134 u32 (*get_postcode)(struct mic_device *mdev); 135 bool (*dma_filter)(struct dma_chan *chan, void *param); 136}; 137 138/** 139 * mic_mmio_read - read from an MMIO register. 140 * @mw: MMIO register base virtual address. 141 * @offset: register offset. 142 * 143 * RETURNS: register value. 144 */ 145static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset) 146{ 147 return ioread32(mw->va + offset); 148} 149 150/** 151 * mic_mmio_write - write to an MMIO register. 152 * @mw: MMIO register base virtual address. 153 * @val: the data value to put into the register 154 * @offset: register offset. 155 * 156 * RETURNS: none. 157 */ 158static inline void 159mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset) 160{ 161 iowrite32(val, mw->va + offset); 162} 163 164void mic_bootparam_init(struct mic_device *mdev); 165void mic_create_debug_dir(struct mic_device *dev); 166void mic_delete_debug_dir(struct mic_device *dev); 167void __init mic_init_debugfs(void); 168void mic_exit_debugfs(void); 169#endif 170