/* bnx2x.h: QLogic Everest network driver.
 *
 * Copyright (c) 2007-2013 Broadcom Corporation
 * Copyright (c) 2014 QLogic Corporation
 * All rights reserved
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation.
 *
 * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
 * Written by: Eliezer Tamir
 * Based on code from Michael Chan's bnx2 driver
 */

#ifndef BNX2X_H
#define BNX2X_H

#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/pci_regs.h>

#include <linux/ptp_clock_kernel.h>
#include <linux/net_tstamp.h>
#include <linux/timecounter.h>

/* compilation time flags */

/* define this to make the driver freeze on error to allow getting debug info
 * (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */

#define DRV_MODULE_VERSION      "1.712.30-0"
#define DRV_MODULE_RELDATE      "2014/02/10"
#define BNX2X_BC_VER            0x040200

#if defined(CONFIG_DCB)
#define BCM_DCBNL
#endif

#include "bnx2x_hsi.h"

#include "../cnic_if.h"

#define BNX2X_MIN_MSIX_VEC_CNT(bp)              ((bp)->min_msix_vec_cnt)

#include <linux/mdio.h>

#include "bnx2x_reg.h"
#include "bnx2x_fw_defs.h"
#include "bnx2x_mfw_req.h"
#include "bnx2x_link.h"
#include "bnx2x_sp.h"
#include "bnx2x_dcb.h"
#include "bnx2x_stats.h"
#include "bnx2x_vfpf.h"

enum bnx2x_int_mode {
        BNX2X_INT_MODE_MSIX,
        BNX2X_INT_MODE_INTX,
        BNX2X_INT_MODE_MSI
};

/* error/debug prints */

#define DRV_MODULE_NAME         "bnx2x"

/* for messages that are currently off */
#define BNX2X_MSG_OFF                   0x0
#define BNX2X_MSG_MCP                   0x0010000 /* was: NETIF_MSG_HW */
#define BNX2X_MSG_STATS                 0x0020000 /* was: NETIF_MSG_TIMER */
#define BNX2X_MSG_NVM                   0x0040000 /* was: NETIF_MSG_HW */
#define BNX2X_MSG_DMAE                  0x0080000 /* was: NETIF_MSG_HW */
#define BNX2X_MSG_SP                    0x0100000 /* was: NETIF_MSG_INTR */
#define BNX2X_MSG_FP                    0x0200000 /* was: NETIF_MSG_INTR */
#define BNX2X_MSG_IOV                   0x0800000
#define BNX2X_MSG_PTP                   0x1000000
#define BNX2X_MSG_IDLE                  0x2000000 /* used for idle check*/
#define BNX2X_MSG_ETHTOOL               0x4000000
#define BNX2X_MSG_DCB                   0x8000000

/* regular debug print */
#define DP_INNER(fmt, ...)                                      \
        pr_notice("[%s:%d(%s)]" fmt,                            \
                  __func__, __LINE__,                           \
                  bp->dev ? (bp->dev->name) : "?",              \
                  ##__VA_ARGS__);

#define DP(__mask, fmt, ...)                                    \
do {                                                            \
        if (unlikely(bp->msg_enable & (__mask)))                \
                DP_INNER(fmt, ##__VA_ARGS__);                   \
} while (0)

#define DP_AND(__mask, fmt, ...)                                \
do {                                                            \
        if (unlikely((bp->msg_enable & (__mask)) == __mask))    \
                DP_INNER(fmt, ##__VA_ARGS__);                   \
} while (0)

#define DP_CONT(__mask, fmt, ...)                               \
do {                                                            \
        if (unlikely(bp->msg_enable & (__mask)))                \
                pr_cont(fmt, ##__VA_ARGS__);                    \
} while (0)

/* errors debug print */
#define BNX2X_DBG_ERR(fmt, ...)                                 \
do {                                                            \
        if (unlikely(netif_msg_probe(bp)))                      \
                pr_err("[%s:%d(%s)]" fmt,                       \
                       __func__, __LINE__,                      \
                       bp->dev ? (bp->dev->name) : "?",         \
                       ##__VA_ARGS__);                          \
} while (0)

/* for errors (never masked) */
#define BNX2X_ERR(fmt, ...)                                     \
do {                                                            \
        pr_err("[%s:%d(%s)]" fmt,                               \
               __func__, __LINE__,                              \
               bp->dev ? (bp->dev->name) : "?",                 \
               ##__VA_ARGS__);                                  \
} while (0)

#define BNX2X_ERROR(fmt, ...)                                   \
        pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__)

/* before we have a dev->name use dev_info() */
#define BNX2X_DEV_INFO(fmt, ...)                                 \
do {                                                             \
        if (unlikely(netif_msg_probe(bp)))                       \
                dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__);    \
} while (0)

/* Error handling */
void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int);
#ifdef BNX2X_STOP_ON_ERROR
#define bnx2x_panic()                           \
do {                                            \
        bp->panic = 1;                          \
        BNX2X_ERR("driver assert\n");           \
        bnx2x_panic_dump(bp, true);             \
} while (0)
#else
#define bnx2x_panic()                           \
do {                                            \
        bp->panic = 1;                          \
        BNX2X_ERR("driver assert\n");           \
        bnx2x_panic_dump(bp, false);            \
} while (0)
#endif

#define bnx2x_mc_addr(ha)      ((ha)->addr)
#define bnx2x_uc_addr(ha)      ((ha)->addr)

#define U64_LO(x)                       ((u32)(((u64)(x)) & 0xffffffff))
#define U64_HI(x)                       ((u32)(((u64)(x)) >> 32))
#define HILO_U64(hi, lo)                ((((u64)(hi)) << 32) + (lo))

#define REG_ADDR(bp, offset)            ((bp->regview) + (offset))

#define REG_RD(bp, offset)              readl(REG_ADDR(bp, offset))
#define REG_RD8(bp, offset)             readb(REG_ADDR(bp, offset))
#define REG_RD16(bp, offset)            readw(REG_ADDR(bp, offset))

#define REG_WR(bp, offset, val)         writel((u32)val, REG_ADDR(bp, offset))
#define REG_WR8(bp, offset, val)        writeb((u8)val, REG_ADDR(bp, offset))
#define REG_WR16(bp, offset, val)       writew((u16)val, REG_ADDR(bp, offset))

#define REG_RD_IND(bp, offset)          bnx2x_reg_rd_ind(bp, offset)
#define REG_WR_IND(bp, offset, val)     bnx2x_reg_wr_ind(bp, offset, val)

#define REG_RD_DMAE(bp, offset, valp, len32) \
        do { \
                bnx2x_read_dmae(bp, offset, len32);\
                memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
        } while (0)

#define REG_WR_DMAE(bp, offset, valp, len32) \
        do { \
                memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
                bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
                                 offset, len32); \
        } while (0)

#define REG_WR_DMAE_LEN(bp, offset, valp, len32) \
        REG_WR_DMAE(bp, offset, valp, len32)

#define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \
        do { \
                memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
                bnx2x_write_big_buf_wb(bp, addr, len32); \
        } while (0)

#define SHMEM_ADDR(bp, field)           (bp->common.shmem_base + \
                                         offsetof(struct shmem_region, field))
#define SHMEM_RD(bp, field)             REG_RD(bp, SHMEM_ADDR(bp, field))
#define SHMEM_WR(bp, field, val)        REG_WR(bp, SHMEM_ADDR(bp, field), val)

#define SHMEM2_ADDR(bp, field)          (bp->common.shmem2_base + \
                                         offsetof(struct shmem2_region, field))
#define SHMEM2_RD(bp, field)            REG_RD(bp, SHMEM2_ADDR(bp, field))
#define SHMEM2_WR(bp, field, val)       REG_WR(bp, SHMEM2_ADDR(bp, field), val)
#define MF_CFG_ADDR(bp, field)          (bp->common.mf_cfg_base + \
                                         offsetof(struct mf_cfg, field))
#define MF2_CFG_ADDR(bp, field)         (bp->common.mf2_cfg_base + \
                                         offsetof(struct mf2_cfg, field))

#define MF_CFG_RD(bp, field)            REG_RD(bp, MF_CFG_ADDR(bp, field))
#define MF_CFG_WR(bp, field, val)       REG_WR(bp,\
                                               MF_CFG_ADDR(bp, field), (val))
#define MF2_CFG_RD(bp, field)           REG_RD(bp, MF2_CFG_ADDR(bp, field))

#define SHMEM2_HAS(bp, field)           ((bp)->common.shmem2_base &&    \
                                         (SHMEM2_RD((bp), size) >       \
                                         offsetof(struct shmem2_region, field)))

#define EMAC_RD(bp, reg)                REG_RD(bp, emac_base + reg)
#define EMAC_WR(bp, reg, val)           REG_WR(bp, emac_base + reg, val)

/* SP SB indices */

/* General SP events - stats query, cfc delete, etc  */
#define HC_SP_INDEX_ETH_DEF_CONS                3

/* EQ completions */
#define HC_SP_INDEX_EQ_CONS                     7

/* FCoE L2 connection completions */
#define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS         6
#define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS         4
/* iSCSI L2 */
#define HC_SP_INDEX_ETH_ISCSI_CQ_CONS           5
#define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS        1

/* Special clients parameters */

/* SB indices */
/* FCoE L2 */
#define BNX2X_FCOE_L2_RX_INDEX \
        (&bp->def_status_blk->sp_sb.\
        index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS])

#define BNX2X_FCOE_L2_TX_INDEX \
        (&bp->def_status_blk->sp_sb.\
        index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS])

/**
 *  CIDs and CLIDs:
 *  CLIDs below is a CLID for func 0, then the CLID for other
 *  functions will be calculated by the formula:
 *
 *  FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
 *
 */
enum {
        BNX2X_ISCSI_ETH_CL_ID_IDX,
        BNX2X_FCOE_ETH_CL_ID_IDX,
        BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
};

/* use a value high enough to be above all the PFs, which has least significant
 * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
 * calculate doorbell address according to old doorbell configuration scheme
 * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
 * We must avoid coming up with cid 8 for iscsi since according to this method
 * the designated UIO cid will come out 0 and it has a special handling for that
 * case which doesn't suit us. Therefore will will cieling to closes cid which
 * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
 */

#define BNX2X_1st_NON_L2_ETH_CID(bp)    (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
                                         (bp)->max_cos)
/* amount of cids traversed by UIO's DPM addition to doorbell */
#define UIO_DPM                         8
/* roundup to DPM offset */
#define UIO_ROUNDUP(bp)                 (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
                                         UIO_DPM))
/* offset to nearest value which has lsb nibble matching DPM */
#define UIO_CID_OFFSET(bp)              ((UIO_ROUNDUP(bp) + UIO_DPM) % \
                                         (UIO_DPM * 2))
/* add offset to rounded-up cid to get a value which could be used with UIO */
#define UIO_DPM_ALIGN(bp)               (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
/* but wait - avoid UIO special case for cid 0 */
#define UIO_DPM_CID0_OFFSET(bp)         ((UIO_DPM * 2) * \
                                         (UIO_DPM_ALIGN(bp) == UIO_DPM))
/* Properly DPM aligned CID dajusted to cid 0 secal case */
#define BNX2X_CNIC_START_ETH_CID(bp)    (UIO_DPM_ALIGN(bp) + \
                                         (UIO_DPM_CID0_OFFSET(bp)))
/* how many cids were wasted  - need this value for cid allocation */
#define UIO_CID_PAD(bp)                 (BNX2X_CNIC_START_ETH_CID(bp) - \
                                         BNX2X_1st_NON_L2_ETH_CID(bp))
        /* iSCSI L2 */
#define BNX2X_ISCSI_ETH_CID(bp)         (BNX2X_CNIC_START_ETH_CID(bp))
        /* FCoE L2 */
#define BNX2X_FCOE_ETH_CID(bp)          (BNX2X_CNIC_START_ETH_CID(bp) + 1)

#define CNIC_SUPPORT(bp)                ((bp)->cnic_support)
#define CNIC_ENABLED(bp)                ((bp)->cnic_enabled)
#define CNIC_LOADED(bp)                 ((bp)->cnic_loaded)
#define FCOE_INIT(bp)                   ((bp)->fcoe_init)

#define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \
        AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR

#define SM_RX_ID                        0
#define SM_TX_ID                        1

/* defines for multiple tx priority indices */
#define FIRST_TX_ONLY_COS_INDEX         1
#define FIRST_TX_COS_INDEX              0

/* rules for calculating the cids of tx-only connections */
#define CID_TO_FP(cid, bp)              ((cid) % BNX2X_NUM_NON_CNIC_QUEUES(bp))
#define CID_COS_TO_TX_ONLY_CID(cid, cos, bp) \
                                (cid + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))

/* fp index inside class of service range */
#define FP_COS_TO_TXQ(fp, cos, bp) \
                        ((fp)->index + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))

/* Indexes for transmission queues array:
 * txdata for RSS i CoS j is at location i + (j * num of RSS)
 * txdata for FCoE (if exist) is at location max cos * num of RSS
 * txdata for FWD (if exist) is one location after FCoE
 * txdata for OOO (if exist) is one location after FWD
 */
enum {
        FCOE_TXQ_IDX_OFFSET,
        FWD_TXQ_IDX_OFFSET,
        OOO_TXQ_IDX_OFFSET,
};
#define MAX_ETH_TXQ_IDX(bp)     (BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos)
#define FCOE_TXQ_IDX(bp)        (MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET)

/* fast path */
/*
 * This driver uses new build_skb() API :
 * RX ring buffer contains pointer to kmalloc() data only,
 * skb are built only after Hardware filled the frame.
 */
struct sw_rx_bd {
        u8              *data;
        DEFINE_DMA_UNMAP_ADDR(mapping);
};

struct sw_tx_bd {
        struct sk_buff  *skb;
        u16             first_bd;
        u8              flags;
/* Set on the first BD descriptor when there is a split BD */
#define BNX2X_TSO_SPLIT_BD              (1<<0)
#define BNX2X_HAS_SECOND_PBD            (1<<1)
};

struct sw_rx_page {
        struct page     *page;
        DEFINE_DMA_UNMAP_ADDR(mapping);
        unsigned int    offset;
};

union db_prod {
        struct doorbell_set_prod data;
        u32             raw;
};

/* dropless fc FW/HW related params */
#define BRB_SIZE(bp)            (CHIP_IS_E3(bp) ? 1024 : 512)
#define MAX_AGG_QS(bp)          (CHIP_IS_E1(bp) ? \
                                        ETH_MAX_AGGREGATION_QUEUES_E1 :\
                                        ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
#define FW_DROP_LEVEL(bp)       (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
#define FW_PREFETCH_CNT         16
#define DROPLESS_FC_HEADROOM    100

/* MC hsi */
#define BCM_PAGE_SHIFT          12
#define BCM_PAGE_SIZE           (1 << BCM_PAGE_SHIFT)
#define BCM_PAGE_MASK           (~(BCM_PAGE_SIZE - 1))
#define BCM_PAGE_ALIGN(addr)    (((addr) + BCM_PAGE_SIZE - 1) & BCM_PAGE_MASK)

#define PAGES_PER_SGE_SHIFT     0
#define PAGES_PER_SGE           (1 << PAGES_PER_SGE_SHIFT)
#define SGE_PAGE_SHIFT          12
#define SGE_PAGE_SIZE           (1 << SGE_PAGE_SHIFT)
#define SGE_PAGE_MASK           (~(SGE_PAGE_SIZE - 1))
#define SGE_PAGE_ALIGN(addr)    (((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK)
#define SGE_PAGES               (SGE_PAGE_SIZE * PAGES_PER_SGE)
#define TPA_AGG_SIZE            min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \
                                            SGE_PAGES), 0xffff)

/* SGE ring related macros */
#define NUM_RX_SGE_PAGES        2
#define RX_SGE_CNT              (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
#define NEXT_PAGE_SGE_DESC_CNT  2
#define MAX_RX_SGE_CNT          (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
/* RX_SGE_CNT is promised to be a power of 2 */
#define RX_SGE_MASK             (RX_SGE_CNT - 1)
#define NUM_RX_SGE              (RX_SGE_CNT * NUM_RX_SGE_PAGES)
#define MAX_RX_SGE              (NUM_RX_SGE - 1)
#define NEXT_SGE_IDX(x)         ((((x) & RX_SGE_MASK) == \
                                  (MAX_RX_SGE_CNT - 1)) ? \
                                        (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
                                        (x) + 1)
#define RX_SGE(x)               ((x) & MAX_RX_SGE)

/*
 * Number of required  SGEs is the sum of two:
 * 1. Number of possible opened aggregations (next packet for
 *    these aggregations will probably consume SGE immediately)
 * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
 *    after placement on BD for new TPA aggregation)
 *
 * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
 */
#define NUM_SGE_REQ             (MAX_AGG_QS(bp) + \
                                        (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
#define NUM_SGE_PG_REQ          ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
                                                MAX_RX_SGE_CNT)
#define SGE_TH_LO(bp)           (NUM_SGE_REQ + \
                                 NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
#define SGE_TH_HI(bp)           (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)

/* Manipulate a bit vector defined as an array of u64 */

/* Number of bits in one sge_mask array element */
#define BIT_VEC64_ELEM_SZ               64
#define BIT_VEC64_ELEM_SHIFT            6
#define BIT_VEC64_ELEM_MASK             ((u64)BIT_VEC64_ELEM_SZ - 1)

#define __BIT_VEC64_SET_BIT(el, bit) \
        do { \
                el = ((el) | ((u64)0x1 << (bit))); \
        } while (0)

#define __BIT_VEC64_CLEAR_BIT(el, bit) \
        do { \
                el = ((el) & (~((u64)0x1 << (bit)))); \
        } while (0)

#define BIT_VEC64_SET_BIT(vec64, idx) \
        __BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
                           (idx) & BIT_VEC64_ELEM_MASK)

#define BIT_VEC64_CLEAR_BIT(vec64, idx) \
        __BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
                             (idx) & BIT_VEC64_ELEM_MASK)

#define BIT_VEC64_TEST_BIT(vec64, idx) \
        (((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \
        ((idx) & BIT_VEC64_ELEM_MASK)) & 0x1)

/* Creates a bitmask of all ones in less significant bits.
   idx - index of the most significant bit in the created mask */
#define BIT_VEC64_ONES_MASK(idx) \
                (((u64)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1)
#define BIT_VEC64_ELEM_ONE_MASK ((u64)(~0))

/*******************************************************/

/* Number of u64 elements in SGE mask array */
#define RX_SGE_MASK_LEN                 (NUM_RX_SGE / BIT_VEC64_ELEM_SZ)
#define RX_SGE_MASK_LEN_MASK            (RX_SGE_MASK_LEN - 1)
#define NEXT_SGE_MASK_ELEM(el)          (((el) + 1) & RX_SGE_MASK_LEN_MASK)

union host_hc_status_block {
        /* pointer to fp status block e1x */
        struct host_hc_status_block_e1x *e1x_sb;
        /* pointer to fp status block e2 */
        struct host_hc_status_block_e2  *e2_sb;
};

struct bnx2x_agg_info {
        /*
         * First aggregation buffer is a data buffer, the following - are pages.
         * We will preallocate the data buffer for each aggregation when
         * we open the interface and will replace the BD at the consumer
         * with this one when we receive the TPA_START CQE in order to
         * keep the Rx BD ring consistent.
         */
        struct sw_rx_bd         first_buf;
        u8                      tpa_state;
#define BNX2X_TPA_START                 1
#define BNX2X_TPA_STOP                  2
#define BNX2X_TPA_ERROR                 3
        u8                      placement_offset;
        u16                     parsing_flags;
        u16                     vlan_tag;
        u16                     len_on_bd;
        u32                     rxhash;
        enum pkt_hash_types     rxhash_type;
        u16                     gro_size;
        u16                     full_page;
};

#define Q_STATS_OFFSET32(stat_name) \
                        (offsetof(struct bnx2x_eth_q_stats, stat_name) / 4)

struct bnx2x_fp_txdata {

        struct sw_tx_bd         *tx_buf_ring;

        union eth_tx_bd_types   *tx_desc_ring;
        dma_addr_t              tx_desc_mapping;

        u32                     cid;

        union db_prod           tx_db;

        u16                     tx_pkt_prod;
        u16                     tx_pkt_cons;
        u16                     tx_bd_prod;
        u16                     tx_bd_cons;

        unsigned long           tx_pkt;

        __le16                  *tx_cons_sb;

        int                     txq_index;
        struct bnx2x_fastpath   *parent_fp;
        int                     tx_ring_size;
};

enum bnx2x_tpa_mode_t {
        TPA_MODE_DISABLED,
        TPA_MODE_LRO,
        TPA_MODE_GRO
};

struct bnx2x_alloc_pool {
        struct page     *page;
        unsigned int    offset;
};

struct bnx2x_fastpath {
        struct bnx2x            *bp; /* parent */

        struct napi_struct      napi;

        union host_hc_status_block      status_blk;
        /* chip independent shortcuts into sb structure */
        __le16                  *sb_index_values;
        __le16                  *sb_running_index;
        /* chip independent shortcut into rx_prods_offset memory */
        u32                     ustorm_rx_prods_offset;

        u32                     rx_buf_size;
        u32                     rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */
        dma_addr_t              status_blk_mapping;

        enum bnx2x_tpa_mode_t   mode;

        u8                      max_cos; /* actual number of active tx coses */
        struct bnx2x_fp_txdata  *txdata_ptr[BNX2X_MULTI_TX_COS];

        struct sw_rx_bd         *rx_buf_ring;   /* BDs mappings ring */
        struct sw_rx_page       *rx_page_ring;  /* SGE pages mappings ring */

        struct eth_rx_bd        *rx_desc_ring;
        dma_addr_t              rx_desc_mapping;

        union eth_rx_cqe        *rx_comp_ring;
        dma_addr_t              rx_comp_mapping;

        /* SGE ring */
        struct eth_rx_sge       *rx_sge_ring;
        dma_addr_t              rx_sge_mapping;

        u64                     sge_mask[RX_SGE_MASK_LEN];

        u32                     cid;

        __le16                  fp_hc_idx;

        u8                      index;          /* number in fp array */
        u8                      rx_queue;       /* index for skb_record */
        u8                      cl_id;          /* eth client id */
        u8                      cl_qzone_id;
        u8                      fw_sb_id;       /* status block number in FW */
        u8                      igu_sb_id;      /* status block number in HW */

        u16                     rx_bd_prod;
        u16                     rx_bd_cons;
        u16                     rx_comp_prod;
        u16                     rx_comp_cons;
        u16                     rx_sge_prod;
        /* The last maximal completed SGE */
        u16                     last_max_sge;
        __le16                  *rx_cons_sb;

        /* TPA related */
        struct bnx2x_agg_info   *tpa_info;
#ifdef BNX2X_STOP_ON_ERROR
        u64                     tpa_queue_used;
#endif
        /* The size is calculated using the following:
             sizeof name field from netdev structure +
             4 ('-Xx-' string) +
             4 (for the digits and to make it DWORD aligned) */
#define FP_NAME_SIZE            (sizeof(((struct net_device *)0)->name) + 8)
        char                    name[FP_NAME_SIZE];

        struct bnx2x_alloc_pool page_pool;
};

#define bnx2x_fp(bp, nr, var)   ((bp)->fp[(nr)].var)
#define bnx2x_sp_obj(bp, fp)    ((bp)->sp_objs[(fp)->index])
#define bnx2x_fp_stats(bp, fp)  (&((bp)->fp_stats[(fp)->index]))
#define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats))

/* Use 2500 as a mini-jumbo MTU for FCoE */
#define BNX2X_FCOE_MINI_JUMBO_MTU       2500

#define FCOE_IDX_OFFSET         0

#define FCOE_IDX(bp)            (BNX2X_NUM_NON_CNIC_QUEUES(bp) + \
                                 FCOE_IDX_OFFSET)
#define bnx2x_fcoe_fp(bp)       (&bp->fp[FCOE_IDX(bp)])
#define bnx2x_fcoe(bp, var)     (bnx2x_fcoe_fp(bp)->var)
#define bnx2x_fcoe_inner_sp_obj(bp)     (&bp->sp_objs[FCOE_IDX(bp)])
#define bnx2x_fcoe_sp_obj(bp, var)      (bnx2x_fcoe_inner_sp_obj(bp)->var)
#define bnx2x_fcoe_tx(bp, var)  (bnx2x_fcoe_fp(bp)-> \
                                                txdata_ptr[FIRST_TX_COS_INDEX] \
                                                ->var)

#define IS_ETH_FP(fp)           ((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp))
#define IS_FCOE_FP(fp)          ((fp)->index == FCOE_IDX((fp)->bp))
#define IS_FCOE_IDX(idx)        ((idx) == FCOE_IDX(bp))

/* MC hsi */
#define MAX_FETCH_BD            13      /* HW max BDs per packet */
#define RX_COPY_THRESH          92

#define NUM_TX_RINGS            16
#define TX_DESC_CNT             (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
#define NEXT_PAGE_TX_DESC_CNT   1
#define MAX_TX_DESC_CNT         (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
#define NUM_TX_BD               (TX_DESC_CNT * NUM_TX_RINGS)
#define MAX_TX_BD               (NUM_TX_BD - 1)
#define MAX_TX_AVAIL            (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
#define NEXT_TX_IDX(x)          ((((x) & MAX_TX_DESC_CNT) == \
                                  (MAX_TX_DESC_CNT - 1)) ? \
                                        (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
                                        (x) + 1)
#define TX_BD(x)                ((x) & MAX_TX_BD)
#define TX_BD_POFF(x)           ((x) & MAX_TX_DESC_CNT)

/* number of NEXT_PAGE descriptors may be required during placement */
#define NEXT_CNT_PER_TX_PKT(bds)        \
                                (((bds) + MAX_TX_DESC_CNT - 1) / \
                                 MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT)
/* max BDs per tx packet w/o next_pages:
 * START_BD             - describes packed
 * START_BD(splitted)   - includes unpaged data segment for GSO
 * PARSING_BD           - for TSO and CSUM data
 * PARSING_BD2          - for encapsulation data
 * Frag BDs             - describes pages for frags
 */
#define BDS_PER_TX_PKT          4
#define MAX_BDS_PER_TX_PKT      (MAX_SKB_FRAGS + BDS_PER_TX_PKT)
/* max BDs per tx packet including next pages */
#define MAX_DESC_PER_TX_PKT     (MAX_BDS_PER_TX_PKT + \
                                 NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))

/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
#define NUM_RX_RINGS            8
#define RX_DESC_CNT             (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
#define NEXT_PAGE_RX_DESC_CNT   2
#define MAX_RX_DESC_CNT         (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
#define RX_DESC_MASK            (RX_DESC_CNT - 1)
#define NUM_RX_BD               (RX_DESC_CNT * NUM_RX_RINGS)
#define MAX_RX_BD               (NUM_RX_BD - 1)
#define MAX_RX_AVAIL            (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)

/* dropless fc calculations for BDs
 *
 * Number of BDs should as number of buffers in BRB:
 * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
 * "next" elements on each page
 */
#define NUM_BD_REQ              BRB_SIZE(bp)
#define NUM_BD_PG_REQ           ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
                                              MAX_RX_DESC_CNT)
#define BD_TH_LO(bp)            (NUM_BD_REQ + \
                                 NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
                                 FW_DROP_LEVEL(bp))
#define BD_TH_HI(bp)            (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)

#define MIN_RX_AVAIL            ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)

#define MIN_RX_SIZE_TPA_HW      (CHIP_IS_E1(bp) ? \
                                        ETH_MIN_RX_CQES_WITH_TPA_E1 : \
                                        ETH_MIN_RX_CQES_WITH_TPA_E1H_E2)
#define MIN_RX_SIZE_NONTPA_HW   ETH_MIN_RX_CQES_WITHOUT_TPA
#define MIN_RX_SIZE_TPA         (max_t(u32, MIN_RX_SIZE_TPA_HW, MIN_RX_AVAIL))
#define MIN_RX_SIZE_NONTPA      (max_t(u32, MIN_RX_SIZE_NONTPA_HW,\
                                                                MIN_RX_AVAIL))

#define NEXT_RX_IDX(x)          ((((x) & RX_DESC_MASK) == \
                                  (MAX_RX_DESC_CNT - 1)) ? \
                                        (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
                                        (x) + 1)
#define RX_BD(x)                ((x) & MAX_RX_BD)

/*
 * As long as CQE is X times bigger than BD entry we have to allocate X times
 * more pages for CQ ring in order to keep it balanced with BD ring
 */
#define CQE_BD_REL      (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
#define NUM_RCQ_RINGS           (NUM_RX_RINGS * CQE_BD_REL)
#define RCQ_DESC_CNT            (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
#define NEXT_PAGE_RCQ_DESC_CNT  1
#define MAX_RCQ_DESC_CNT        (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
#define NUM_RCQ_BD              (RCQ_DESC_CNT * NUM_RCQ_RINGS)
#define MAX_RCQ_BD              (NUM_RCQ_BD - 1)
#define MAX_RCQ_AVAIL           (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
#define NEXT_RCQ_IDX(x)         ((((x) & MAX_RCQ_DESC_CNT) == \
                                  (MAX_RCQ_DESC_CNT - 1)) ? \
                                        (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
                                        (x) + 1)
#define RCQ_BD(x)               ((x) & MAX_RCQ_BD)

/* dropless fc calculations for RCQs
 *
 * Number of RCQs should be as number of buffers in BRB:
 * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
 * "next" elements on each page
 */
#define NUM_RCQ_REQ             BRB_SIZE(bp)
#define NUM_RCQ_PG_REQ          ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
                                              MAX_RCQ_DESC_CNT)
#define RCQ_TH_LO(bp)           (NUM_RCQ_REQ + \
                                 NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
                                 FW_DROP_LEVEL(bp))
#define RCQ_TH_HI(bp)           (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)

/* This is needed for determining of last_max */
#define SUB_S16(a, b)           (s16)((s16)(a) - (s16)(b))
#define SUB_S32(a, b)           (s32)((s32)(a) - (s32)(b))

#define BNX2X_SWCID_SHIFT       17
#define BNX2X_SWCID_MASK        ((0x1 << BNX2X_SWCID_SHIFT) - 1)

/* used on a CID received from the HW */
#define SW_CID(x)                       (le32_to_cpu(x) & BNX2X_SWCID_MASK)
#define CQE_CMD(x)                      (le32_to_cpu(x) >> \
                                        COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT)

#define BD_UNMAP_ADDR(bd)               HILO_U64(le32_to_cpu((bd)->addr_hi), \
                                                 le32_to_cpu((bd)->addr_lo))
#define BD_UNMAP_LEN(bd)                (le16_to_cpu((bd)->nbytes))

#define BNX2X_DB_MIN_SHIFT              3       /* 8 bytes */
#define BNX2X_DB_SHIFT                  3       /* 8 bytes*/
#if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT)
#error "Min DB doorbell stride is 8"
#endif
#define DOORBELL(bp, cid, val) \
        do { \
                writel((u32)(val), bp->doorbells + (bp->db_size * (cid))); \
        } while (0)

/* TX CSUM helpers */
#define SKB_CS_OFF(skb)         (offsetof(struct tcphdr, check) - \
                                 skb->csum_offset)
#define SKB_CS(skb)             (*(u16 *)(skb_transport_header(skb) + \
                                          skb->csum_offset))

#define pbd_tcp_flags(tcp_hdr)  (ntohl(tcp_flag_word(tcp_hdr))>>16 & 0xff)

#define XMIT_PLAIN              0
#define XMIT_CSUM_V4            (1 << 0)
#define XMIT_CSUM_V6            (1 << 1)
#define XMIT_CSUM_TCP           (1 << 2)
#define XMIT_GSO_V4             (1 << 3)
#define XMIT_GSO_V6             (1 << 4)
#define XMIT_CSUM_ENC_V4        (1 << 5)
#define XMIT_CSUM_ENC_V6        (1 << 6)
#define XMIT_GSO_ENC_V4         (1 << 7)
#define XMIT_GSO_ENC_V6         (1 << 8)

#define XMIT_CSUM_ENC           (XMIT_CSUM_ENC_V4 | XMIT_CSUM_ENC_V6)
#define XMIT_GSO_ENC            (XMIT_GSO_ENC_V4 | XMIT_GSO_ENC_V6)

#define XMIT_CSUM               (XMIT_CSUM_V4 | XMIT_CSUM_V6 | XMIT_CSUM_ENC)
#define XMIT_GSO                (XMIT_GSO_V4 | XMIT_GSO_V6 | XMIT_GSO_ENC)

/* stuff added to make the code fit 80Col */
#define CQE_TYPE(cqe_fp_flags)   ((cqe_fp_flags) & ETH_FAST_PATH_RX_CQE_TYPE)
#define CQE_TYPE_START(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_START_AGG)
#define CQE_TYPE_STOP(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_STOP_AGG)
#define CQE_TYPE_SLOW(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_RAMROD)
#define CQE_TYPE_FAST(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_FASTPATH)

#define ETH_RX_ERROR_FALGS              ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG

#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
                                (((le16_to_cpu(flags) & \
                                   PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
                                  PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT) \
                                 == PRS_FLAG_OVERETH_IPV4)
#define BNX2X_RX_SUM_FIX(cqe) \
        BNX2X_PRS_FLAG_OVERETH_IPV4(cqe->fast_path_cqe.pars_flags.flags)

#define FP_USB_FUNC_OFF \
                        offsetof(struct cstorm_status_block_u, func)
#define FP_CSB_FUNC_OFF \
                        offsetof(struct cstorm_status_block_c, func)

#define HC_INDEX_ETH_RX_CQ_CONS         1

#define HC_INDEX_OOO_TX_CQ_CONS         4

#define HC_INDEX_ETH_TX_CQ_CONS_COS0    5

#define HC_INDEX_ETH_TX_CQ_CONS_COS1    6

#define HC_INDEX_ETH_TX_CQ_CONS_COS2    7

#define HC_INDEX_ETH_FIRST_TX_CQ_CONS   HC_INDEX_ETH_TX_CQ_CONS_COS0

#define BNX2X_RX_SB_INDEX \
        (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])

#define BNX2X_TX_SB_INDEX_BASE BNX2X_TX_SB_INDEX_COS0

#define BNX2X_TX_SB_INDEX_COS0 \
        (&fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0])

/* end of fast path */

/* common */

struct bnx2x_common {

        u32                     chip_id;
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
#define CHIP_ID(bp)                     (bp->common.chip_id & 0xfffffff0)

#define CHIP_NUM(bp)                    (bp->common.chip_id >> 16)
#define CHIP_NUM_57710                  0x164e
#define CHIP_NUM_57711                  0x164f
#define CHIP_NUM_57711E                 0x1650
#define CHIP_NUM_57712                  0x1662
#define CHIP_NUM_57712_MF               0x1663
#define CHIP_NUM_57712_VF               0x166f
#define CHIP_NUM_57713                  0x1651
#define CHIP_NUM_57713E                 0x1652
#define CHIP_NUM_57800                  0x168a
#define CHIP_NUM_57800_MF               0x16a5
#define CHIP_NUM_57800_VF               0x16a9
#define CHIP_NUM_57810                  0x168e
#define CHIP_NUM_57810_MF               0x16ae
#define CHIP_NUM_57810_VF               0x16af
#define CHIP_NUM_57811                  0x163d
#define CHIP_NUM_57811_MF               0x163e
#define CHIP_NUM_57811_VF               0x163f
#define CHIP_NUM_57840_OBSOLETE         0x168d
#define CHIP_NUM_57840_MF_OBSOLETE      0x16ab
#define CHIP_NUM_57840_4_10             0x16a1
#define CHIP_NUM_57840_2_20             0x16a2
#define CHIP_NUM_57840_MF               0x16a4
#define CHIP_NUM_57840_VF               0x16ad
#define CHIP_IS_E1(bp)                  (CHIP_NUM(bp) == CHIP_NUM_57710)
#define CHIP_IS_57711(bp)               (CHIP_NUM(bp) == CHIP_NUM_57711)
#define CHIP_IS_57711E(bp)              (CHIP_NUM(bp) == CHIP_NUM_57711E)
#define CHIP_IS_57712(bp)               (CHIP_NUM(bp) == CHIP_NUM_57712)
#define CHIP_IS_57712_VF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57712_VF)
#define CHIP_IS_57712_MF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57712_MF)
#define CHIP_IS_57800(bp)               (CHIP_NUM(bp) == CHIP_NUM_57800)
#define CHIP_IS_57800_MF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57800_MF)
#define CHIP_IS_57800_VF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57800_VF)
#define CHIP_IS_57810(bp)               (CHIP_NUM(bp) == CHIP_NUM_57810)
#define CHIP_IS_57810_MF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57810_MF)
#define CHIP_IS_57810_VF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57810_VF)
#define CHIP_IS_57811(bp)               (CHIP_NUM(bp) == CHIP_NUM_57811)
#define CHIP_IS_57811_MF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57811_MF)
#define CHIP_IS_57811_VF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57811_VF)
#define CHIP_IS_57840(bp)               \
                ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \
                 (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \
                 (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE))
#define CHIP_IS_57840_MF(bp)    ((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \
                                 (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE))
#define CHIP_IS_57840_VF(bp)            (CHIP_NUM(bp) == CHIP_NUM_57840_VF)
#define CHIP_IS_E1H(bp)                 (CHIP_IS_57711(bp) || \
                                         CHIP_IS_57711E(bp))
#define CHIP_IS_57811xx(bp)             (CHIP_IS_57811(bp) || \
                                         CHIP_IS_57811_MF(bp) || \
                                         CHIP_IS_57811_VF(bp))
#define CHIP_IS_E2(bp)                  (CHIP_IS_57712(bp) || \
                                         CHIP_IS_57712_MF(bp) || \
                                         CHIP_IS_57712_VF(bp))
#define CHIP_IS_E3(bp)                  (CHIP_IS_57800(bp) || \
                                         CHIP_IS_57800_MF(bp) || \
                                         CHIP_IS_57800_VF(bp) || \
                                         CHIP_IS_57810(bp) || \
                                         CHIP_IS_57810_MF(bp) || \
                                         CHIP_IS_57810_VF(bp) || \
                                         CHIP_IS_57811xx(bp) || \
                                         CHIP_IS_57840(bp) || \
                                         CHIP_IS_57840_MF(bp) || \
                                         CHIP_IS_57840_VF(bp))
#define CHIP_IS_E1x(bp)                 (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp)))
#define USES_WARPCORE(bp)               (CHIP_IS_E3(bp))
#define IS_E1H_OFFSET                   (!CHIP_IS_E1(bp))

#define CHIP_REV_SHIFT                  12
#define CHIP_REV_MASK                   (0xF << CHIP_REV_SHIFT)
#define CHIP_REV_VAL(bp)                (bp->common.chip_id & CHIP_REV_MASK)
#define CHIP_REV_Ax                     (0x0 << CHIP_REV_SHIFT)
#define CHIP_REV_Bx                     (0x1 << CHIP_REV_SHIFT)
/* assume maximum 5 revisions */
#define CHIP_REV_IS_SLOW(bp)            (CHIP_REV_VAL(bp) > 0x00005000)
/* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */
#define CHIP_REV_IS_EMUL(bp)            ((CHIP_REV_IS_SLOW(bp)) && \
                                         !(CHIP_REV_VAL(bp) & 0x00001000))
/* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */
#define CHIP_REV_IS_FPGA(bp)            ((CHIP_REV_IS_SLOW(bp)) && \
                                         (CHIP_REV_VAL(bp) & 0x00001000))

#define CHIP_TIME(bp)                   ((CHIP_REV_IS_EMUL(bp)) ? 2000 : \
                                        ((CHIP_REV_IS_FPGA(bp)) ? 200 : 1))

#define CHIP_METAL(bp)                  (bp->common.chip_id & 0x00000ff0)
#define CHIP_BOND_ID(bp)                (bp->common.chip_id & 0x0000000f)
#define CHIP_REV_SIM(bp)                (((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\
                                           (CHIP_REV_SHIFT + 1)) \
                                                << CHIP_REV_SHIFT)
#define CHIP_REV(bp)                    (CHIP_REV_IS_SLOW(bp) ? \
                                                CHIP_REV_SIM(bp) :\
                                                CHIP_REV_VAL(bp))
#define CHIP_IS_E3B0(bp)                (CHIP_IS_E3(bp) && \
                                         (CHIP_REV(bp) == CHIP_REV_Bx))
#define CHIP_IS_E3A0(bp)                (CHIP_IS_E3(bp) && \
                                         (CHIP_REV(bp) == CHIP_REV_Ax))
/* This define is used in two main places:
 * 1. In the early stages of nic_load, to know if to configure Parser / Searcher
 * to nic-only mode or to offload mode. Offload mode is configured if either the
 * chip is E1x (where MIC_MODE register is not applicable), or if cnic already
 * registered for this port (which means that the user wants storage services).
 * 2. During cnic-related load, to know if offload mode is already configured in
 * the HW or needs to be configured.
 * Since the transition from nic-mode to offload-mode in HW causes traffic
 * corruption, nic-mode is configured only in ports on which storage services
 * where never requested.
 */
#define CONFIGURE_NIC_MODE(bp)          (!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp))

        int                     flash_size;
#define BNX2X_NVRAM_1MB_SIZE                    0x20000 /* 1M bit in bytes */
#define BNX2X_NVRAM_TIMEOUT_COUNT               30000
#define BNX2X_NVRAM_PAGE_SIZE                   256

        u32                     shmem_base;
        u32                     shmem2_base;
        u32                     mf_cfg_base;
        u32                     mf2_cfg_base;

        u32                     hw_config;

        u32                     bc_ver;

        u8                      int_block;
#define INT_BLOCK_HC                    0
#define INT_BLOCK_IGU                   1
#define INT_BLOCK_MODE_NORMAL           0
#define INT_BLOCK_MODE_BW_COMP          2
#define CHIP_INT_MODE_IS_NBC(bp)                \
                        (!CHIP_IS_E1x(bp) &&    \
                        !((bp)->common.int_block & INT_BLOCK_MODE_BW_COMP))
#define CHIP_INT_MODE_IS_BC(bp) (!CHIP_INT_MODE_IS_NBC(bp))

        u8                      chip_port_mode;
#define CHIP_4_PORT_MODE                        0x0
#define CHIP_2_PORT_MODE                        0x1
#define CHIP_PORT_MODE_NONE                     0x2
#define CHIP_MODE(bp)                   (bp->common.chip_port_mode)
#define CHIP_MODE_IS_4_PORT(bp) (CHIP_MODE(bp) == CHIP_4_PORT_MODE)

        u32                     boot_mode;
};

/* IGU MSIX STATISTICS on 57712: 64 for VFs; 4 for PFs; 4 for Attentions */
#define BNX2X_IGU_STAS_MSG_VF_CNT 64
#define BNX2X_IGU_STAS_MSG_PF_CNT 4

#define MAX_IGU_ATTN_ACK_TO       100
/* end of common */

/* port */

struct bnx2x_port {
        u32                     pmf;

        u32                     link_config[LINK_CONFIG_SIZE];

        u32                     supported[LINK_CONFIG_SIZE];

        u32                     advertising[LINK_CONFIG_SIZE];

        u32                     phy_addr;

        /* used to synchronize phy accesses */
        struct mutex            phy_mutex;

        u32                     port_stx;

        struct nig_stats        old_nig_stats;
};

/* end of port */

#define STATS_OFFSET32(stat_name) \
                        (offsetof(struct bnx2x_eth_stats, stat_name) / 4)

/* slow path */
#define BNX2X_MAX_NUM_OF_VFS    64
#define BNX2X_VF_CID_WND        4 /* log num of queues per VF. HW config. */
#define BNX2X_CIDS_PER_VF       (1 << BNX2X_VF_CID_WND)

/* We need to reserve doorbell addresses for all VF and queue combinations */
#define BNX2X_VF_CIDS           (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF)

/* The doorbell is configured to have the same number of CIDs for PFs and for
 * VFs. For this reason the PF CID zone is as large as the VF zone.
 */
#define BNX2X_FIRST_VF_CID      BNX2X_VF_CIDS
#define BNX2X_MAX_NUM_VF_QUEUES 64
#define BNX2X_VF_ID_INVALID     0xFF

/* the number of VF CIDS multiplied by the amount of bytes reserved for each
 * cid must not exceed the size of the VF doorbell
 */
#define BNX2X_VF_BAR_SIZE       512
#if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT))
#error "VF doorbell bar size is 512"
#endif

/*
 * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
 * control by the number of fast-path status blocks supported by the
 * device (HW/FW). Each fast-path status block (FP-SB) aka non-default
 * status block represents an independent interrupts context that can
 * serve a regular L2 networking queue. However special L2 queues such
 * as the FCoE queue do not require a FP-SB and other components like
 * the CNIC may consume FP-SB reducing the number of possible L2 queues
 *
 * If the maximum number of FP-SB available is X then:
 * a. If CNIC is supported it consumes 1 FP-SB thus the max number of
 *    regular L2 queues is Y=X-1
 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
 * c. If the FCoE L2 queue is supported the actual number of L2 queues
 *    is Y+1
 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
 *    slow-path interrupts) or Y+2 if CNIC is supported (one additional
 *    FP interrupt context for the CNIC).
 * e. The number of HW context (CID count) is always X or X+1 if FCoE
 *    L2 queue is supported. The cid for the FCoE L2 queue is always X.
 */

/* fast-path interrupt contexts E1x */
#define FP_SB_MAX_E1x           16
/* fast-path interrupt contexts E2 */
#define FP_SB_MAX_E2            HC_SB_MAX_SB_E2

union cdu_context {
        struct eth_context eth;
        char pad[1024];
};

/* CDU host DB constants */
#define CDU_ILT_PAGE_SZ_HW      2
#define CDU_ILT_PAGE_SZ         (8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */
#define ILT_PAGE_CIDS           (CDU_ILT_PAGE_SZ / sizeof(union cdu_context))

#define CNIC_ISCSI_CID_MAX      256
#define CNIC_FCOE_CID_MAX       2048
#define CNIC_CID_MAX            (CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX)
#define CNIC_ILT_LINES          DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS)

#define QM_ILT_PAGE_SZ_HW       0
#define QM_ILT_PAGE_SZ          (4096 << QM_ILT_PAGE_SZ_HW) /* 4K */
#define QM_CID_ROUND            1024

/* TM (timers) host DB constants */
#define TM_ILT_PAGE_SZ_HW       0
#define TM_ILT_PAGE_SZ          (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
#define TM_CONN_NUM             (BNX2X_FIRST_VF_CID + \
                                 BNX2X_VF_CIDS + \
                                 CNIC_ISCSI_CID_MAX)
#define TM_ILT_SZ               (8 * TM_CONN_NUM)
#define TM_ILT_LINES            DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)

/* SRC (Searcher) host DB constants */
#define SRC_ILT_PAGE_SZ_HW      0
#define SRC_ILT_PAGE_SZ         (4096 << SRC_ILT_PAGE_SZ_HW) /* 4K */
#define SRC_HASH_BITS           10
#define SRC_CONN_NUM            (1 << SRC_HASH_BITS) /* 1024 */
#define SRC_ILT_SZ              (sizeof(struct src_ent) * SRC_CONN_NUM)
#define SRC_T2_SZ               SRC_ILT_SZ
#define SRC_ILT_LINES           DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ)

#define MAX_DMAE_C              8

/* DMA memory not used in fastpath */
struct bnx2x_slowpath {
        union {
                struct mac_configuration_cmd            e1x;
                struct eth_classify_rules_ramrod_data   e2;
        } mac_rdata;

        union {
                struct eth_classify_rules_ramrod_data   e2;
        } vlan_rdata;

        union {
                struct tstorm_eth_mac_filter_config     e1x;
                struct eth_filter_rules_ramrod_data     e2;
        } rx_mode_rdata;

        union {
                struct mac_configuration_cmd            e1;
                struct eth_multicast_rules_ramrod_data  e2;
        } mcast_rdata;

        struct eth_rss_update_ramrod_data       rss_rdata;

        /* Queue State related ramrods are always sent under rtnl_lock */
        union {
                struct client_init_ramrod_data  init_data;
                struct client_update_ramrod_data update_data;
                struct tpa_update_ramrod_data tpa_data;
        } q_rdata;

        union {
                struct function_start_data      func_start;
                /* pfc configuration for DCBX ramrod */
                struct flow_control_configuration pfc_config;
        } func_rdata;

        /* afex ramrod can not be a part of func_rdata union because these
         * events might arrive in parallel to other events from func_rdata.
         * Therefore, if they would have been defined in the same union,
         * data can get corrupted.
         */
        union {
                struct afex_vif_list_ramrod_data        viflist_data;
                struct function_update_data             func_update;
        } func_afex_rdata;

        /* used by dmae command executer */
        struct dmae_command             dmae[MAX_DMAE_C];

        u32                             stats_comp;
        union mac_stats                 mac_stats;
        struct nig_stats                nig_stats;
        struct host_port_stats          port_stats;
        struct host_func_stats          func_stats;

        u32                             wb_comp;
        u32                             wb_data[4];

        union drv_info_to_mcp           drv_info_to_mcp;
};

#define bnx2x_sp(bp, var)               (&bp->slowpath->var)
#define bnx2x_sp_mapping(bp, var) \
                (bp->slowpath_mapping + offsetof(struct bnx2x_slowpath, var))

/* attn group wiring */
#define MAX_DYNAMIC_ATTN_GRPS           8

struct attn_route {
        u32 sig[5];
};

struct iro {
        u32 base;
        u16 m1;
        u16 m2;
        u16 m3;
        u16 size;
};

struct hw_context {
        union cdu_context *vcxt;
        dma_addr_t cxt_mapping;
        size_t size;
};

/* forward */
struct bnx2x_ilt;

struct bnx2x_vfdb;

enum bnx2x_recovery_state {
        BNX2X_RECOVERY_DONE,
        BNX2X_RECOVERY_INIT,
        BNX2X_RECOVERY_WAIT,
        BNX2X_RECOVERY_FAILED,
        BNX2X_RECOVERY_NIC_LOADING
};

/*
 * Event queue (EQ or event ring) MC hsi
 * NUM_EQ_PAGES and EQ_DESC_CNT_PAGE must be power of 2
 */
#define NUM_EQ_PAGES            1
#define EQ_DESC_CNT_PAGE        (BCM_PAGE_SIZE / sizeof(union event_ring_elem))
#define EQ_DESC_MAX_PAGE        (EQ_DESC_CNT_PAGE - 1)
#define NUM_EQ_DESC             (EQ_DESC_CNT_PAGE * NUM_EQ_PAGES)
#define EQ_DESC_MASK            (NUM_EQ_DESC - 1)
#define MAX_EQ_AVAIL            (EQ_DESC_MAX_PAGE * NUM_EQ_PAGES - 2)

/* depends on EQ_DESC_CNT_PAGE being a power of 2 */
#define NEXT_EQ_IDX(x)          ((((x) & EQ_DESC_MAX_PAGE) == \
                                  (EQ_DESC_MAX_PAGE - 1)) ? (x) + 2 : (x) + 1)

/* depends on the above and on NUM_EQ_PAGES being a power of 2 */
#define EQ_DESC(x)              ((x) & EQ_DESC_MASK)

#define BNX2X_EQ_INDEX \
        (&bp->def_status_blk->sp_sb.\
        index_values[HC_SP_INDEX_EQ_CONS])

/* This is a data that will be used to create a link report message.
 * We will keep the data used for the last link report in order
 * to prevent reporting the same link parameters twice.
 */
struct bnx2x_link_report_data {
        u16 line_speed;                 /* Effective line speed */
        unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
};

enum {
        BNX2X_LINK_REPORT_FD,           /* Full DUPLEX */
        BNX2X_LINK_REPORT_LINK_DOWN,
        BNX2X_LINK_REPORT_RX_FC_ON,
        BNX2X_LINK_REPORT_TX_FC_ON,
};

enum {
        BNX2X_PORT_QUERY_IDX,
        BNX2X_PF_QUERY_IDX,
        BNX2X_FCOE_QUERY_IDX,
        BNX2X_FIRST_QUEUE_QUERY_IDX,
};

struct bnx2x_fw_stats_req {
        struct stats_query_header hdr;
        struct stats_query_entry query[FP_SB_MAX_E1x+
                BNX2X_FIRST_QUEUE_QUERY_IDX];
};

struct bnx2x_fw_stats_data {
        struct stats_counter            storm_counters;
        struct per_port_stats           port;
        struct per_pf_stats             pf;
        struct fcoe_statistics_params   fcoe;
        struct per_queue_stats          queue_stats[1];
};

/* Public slow path states */
enum sp_rtnl_flag {
        BNX2X_SP_RTNL_SETUP_TC,
        BNX2X_SP_RTNL_TX_TIMEOUT,
        BNX2X_SP_RTNL_FAN_FAILURE,
        BNX2X_SP_RTNL_AFEX_F_UPDATE,
        BNX2X_SP_RTNL_ENABLE_SRIOV,
        BNX2X_SP_RTNL_VFPF_MCAST,
        BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
        BNX2X_SP_RTNL_RX_MODE,
        BNX2X_SP_RTNL_HYPERVISOR_VLAN,
        BNX2X_SP_RTNL_TX_STOP,
        BNX2X_SP_RTNL_GET_DRV_VERSION,
        BNX2X_SP_RTNL_CHANGE_UDP_PORT,
};

enum bnx2x_iov_flag {
        BNX2X_IOV_HANDLE_VF_MSG,
        BNX2X_IOV_HANDLE_FLR,
};

struct bnx2x_prev_path_list {
        struct list_head list;
        u8 bus;
        u8 slot;
        u8 path;
        u8 aer;
        u8 undi;
};

struct bnx2x_sp_objs {
        /* MACs object */
        struct bnx2x_vlan_mac_obj mac_obj;

        /* Queue State object */
        struct bnx2x_queue_sp_obj q_obj;

        /* VLANs object */
        struct bnx2x_vlan_mac_obj vlan_obj;
};

struct bnx2x_fp_stats {
        struct tstorm_per_queue_stats old_tclient;
        struct ustorm_per_queue_stats old_uclient;
        struct xstorm_per_queue_stats old_xclient;
        struct bnx2x_eth_q_stats eth_q_stats;
        struct bnx2x_eth_q_stats_old eth_q_stats_old;
};

enum {
        SUB_MF_MODE_UNKNOWN = 0,
        SUB_MF_MODE_UFP,
        SUB_MF_MODE_NPAR1_DOT_5,
        SUB_MF_MODE_BD,
};

struct bnx2x_vlan_entry {
        struct list_head link;
        u16 vid;
        bool hw;
};

enum bnx2x_udp_port_type {
        BNX2X_UDP_PORT_VXLAN,
        BNX2X_UDP_PORT_GENEVE,
        BNX2X_UDP_PORT_MAX,
};

struct bnx2x_udp_tunnel {
        u16 dst_port;
        u8 count;
};

struct bnx2x {
        /* Fields used in the tx and intr/napi performance paths
         * are grouped together in the beginning of the structure
         */
        struct bnx2x_fastpath   *fp;
        struct bnx2x_sp_objs    *sp_objs;
        struct bnx2x_fp_stats   *fp_stats;
        struct bnx2x_fp_txdata  *bnx2x_txq;
        void __iomem            *regview;
        void __iomem            *doorbells;
        u16                     db_size;

        u8                      pf_num; /* absolute PF number */
        u8                      pfid;   /* per-path PF number */
        int                     base_fw_ndsb; /**/
#define BP_PATH(bp)                     (CHIP_IS_E1x(bp) ? 0 : (bp->pf_num & 1))
#define BP_PORT(bp)                     (bp->pfid & 1)
#define BP_FUNC(bp)                     (bp->pfid)
#define BP_ABS_FUNC(bp)                 (bp->pf_num)
#define BP_VN(bp)                       ((bp)->pfid >> 1)
#define BP_MAX_VN_NUM(bp)               (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
#define BP_L_ID(bp)                     (BP_VN(bp) << 2)
#define BP_FW_MB_IDX_VN(bp, vn)         (BP_PORT(bp) +\
          (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2  : 1))
#define BP_FW_MB_IDX(bp)                BP_FW_MB_IDX_VN(bp, BP_VN(bp))

#ifdef CONFIG_BNX2X_SRIOV
        /* protects vf2pf mailbox from simultaneous access */
        struct mutex            vf2pf_mutex;
        /* vf pf channel mailbox contains request and response buffers */
        struct bnx2x_vf_mbx_msg *vf2pf_mbox;
        dma_addr_t              vf2pf_mbox_mapping;

        /* we set aside a copy of the acquire response */
        struct pfvf_acquire_resp_tlv acquire_resp;

        /* bulletin board for messages from pf to vf */
        union pf_vf_bulletin   *pf2vf_bulletin;
        dma_addr_t              pf2vf_bulletin_mapping;

        union pf_vf_bulletin            shadow_bulletin;
        struct pf_vf_bulletin_content   old_bulletin;

        u16 requested_nr_virtfn;
#endif /* CONFIG_BNX2X_SRIOV */

        struct net_device       *dev;
        struct pci_dev          *pdev;

        const struct iro        *iro_arr;
#define IRO (bp->iro_arr)

        enum bnx2x_recovery_state recovery_state;
        int                     is_leader;
        struct msix_entry       *msix_table;

        int                     tx_ring_size;

/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
#define ETH_OVREHEAD            (ETH_HLEN + 8 + 8)
#define ETH_MIN_PACKET_SIZE             60
#define ETH_MAX_PACKET_SIZE             1500
#define ETH_MAX_JUMBO_PACKET_SIZE       9600
/* TCP with Timestamp Option (32) + IPv6 (40) */
#define ETH_MAX_TPA_HEADER_SIZE         72

        /* Max supported alignment is 256 (8 shift)
         * minimal alignment shift 6 is optimal for 57xxx HW performance
         */
#define BNX2X_RX_ALIGN_SHIFT            max(6, min(8, L1_CACHE_SHIFT))

        /* FW uses 2 Cache lines Alignment for start packet and size
         *
         * We assume skb_build() uses sizeof(struct skb_shared_info) bytes
         * at the end of skb->data, to avoid wasting a full cache line.
         * This reduces memory use (skb->truesize).
         */
#define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT)

#define BNX2X_FW_RX_ALIGN_END                                   \
        max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT,                 \
            SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))

#define BNX2X_PXP_DRAM_ALIGN            (BNX2X_RX_ALIGN_SHIFT - 5)

        struct host_sp_status_block *def_status_blk;
#define DEF_SB_IGU_ID                   16
#define DEF_SB_ID                       HC_SP_SB_ID
        __le16                  def_idx;
        __le16                  def_att_idx;
        u32                     attn_state;
        struct attn_route       attn_group[MAX_DYNAMIC_ATTN_GRPS];

        /* slow path ring */
        struct eth_spe          *spq;
        dma_addr_t              spq_mapping;
        u16                     spq_prod_idx;
        struct eth_spe          *spq_prod_bd;
        struct eth_spe          *spq_last_bd;
        __le16                  *dsb_sp_prod;
        atomic_t                cq_spq_left; /* ETH_XXX ramrods credit */
        /* used to synchronize spq accesses */
        spinlock_t              spq_lock;

        /* event queue */
        union event_ring_elem   *eq_ring;
        dma_addr_t              eq_mapping;
        u16                     eq_prod;
        u16                     eq_cons;
        __le16                  *eq_cons_sb;
        atomic_t                eq_spq_left; /* COMMON_XXX ramrods credit */

        /* Counter for marking that there is a STAT_QUERY ramrod pending */
        u16                     stats_pending;
        /*  Counter for completed statistics ramrods */
        u16                     stats_comp;

        /* End of fields used in the performance code paths */

        int                     panic;
        int                     msg_enable;

        u32                     flags;
#define PCIX_FLAG                       (1 << 0)
#define PCI_32BIT_FLAG                  (1 << 1)
#define ONE_PORT_FLAG                   (1 << 2)
#define NO_WOL_FLAG                     (1 << 3)
#define USING_MSIX_FLAG                 (1 << 5)
#define USING_MSI_FLAG                  (1 << 6)
#define DISABLE_MSI_FLAG                (1 << 7)
#define NO_MCP_FLAG                     (1 << 9)
#define MF_FUNC_DIS                     (1 << 11)
#define OWN_CNIC_IRQ                    (1 << 12)
#define NO_ISCSI_OOO_FLAG               (1 << 13)
#define NO_ISCSI_FLAG                   (1 << 14)
#define NO_FCOE_FLAG                    (1 << 15)
#define BC_SUPPORTS_PFC_STATS           (1 << 17)
#define TX_SWITCHING                    (1 << 18)
#define BC_SUPPORTS_FCOE_FEATURES       (1 << 19)
#define USING_SINGLE_MSIX_FLAG          (1 << 20)
#define BC_SUPPORTS_DCBX_MSG_NON_PMF    (1 << 21)
#define IS_VF_FLAG                      (1 << 22)
#define BC_SUPPORTS_RMMOD_CMD           (1 << 23)
#define HAS_PHYS_PORT_ID                (1 << 24)
#define AER_ENABLED                     (1 << 25)
#define PTP_SUPPORTED                   (1 << 26)
#define TX_TIMESTAMPING_EN              (1 << 27)

#define BP_NOMCP(bp)                    ((bp)->flags & NO_MCP_FLAG)

#ifdef CONFIG_BNX2X_SRIOV
#define IS_VF(bp)                       ((bp)->flags & IS_VF_FLAG)
#define IS_PF(bp)                       (!((bp)->flags & IS_VF_FLAG))
#else
#define IS_VF(bp)                       false
#define IS_PF(bp)                       true
#endif

#define NO_ISCSI(bp)            ((bp)->flags & NO_ISCSI_FLAG)
#define NO_ISCSI_OOO(bp)        ((bp)->flags & NO_ISCSI_OOO_FLAG)
#define NO_FCOE(bp)             ((bp)->flags & NO_FCOE_FLAG)

        u8                      cnic_support;
        bool                    cnic_enabled;
        bool                    cnic_loaded;
        struct cnic_eth_dev     *(*cnic_probe)(struct net_device *);

        /* Flag that indicates that we can start looking for FCoE L2 queue
         * completions in the default status block.
         */
        bool                    fcoe_init;

        int                     mrrs;

        struct delayed_work     sp_task;
        struct delayed_work     iov_task;

        atomic_t                interrupt_occurred;
        struct delayed_work     sp_rtnl_task;

        struct delayed_work     period_task;
        struct timer_list       timer;
        int                     current_interval;

        u16                     fw_seq;
        u16                     fw_drv_pulse_wr_seq;
        u32                     func_stx;

        struct link_params      link_params;
        struct link_vars        link_vars;
        u32                     link_cnt;
        struct bnx2x_link_report_data last_reported_link;

        struct mdio_if_info     mdio;

        struct bnx2x_common     common;
        struct bnx2x_port       port;

        struct cmng_init        cmng;

        u32                     mf_config[E1HVN_MAX];
        u32                     mf_ext_config;
        u32                     path_has_ovlan; /* E3 */
        u16                     mf_ov;
        u8                      mf_mode;
#define IS_MF(bp)               (bp->mf_mode != 0)
#define IS_MF_SI(bp)            (bp->mf_mode == MULTI_FUNCTION_SI)
#define IS_MF_SD(bp)            (bp->mf_mode == MULTI_FUNCTION_SD)
#define IS_MF_AFEX(bp)          (bp->mf_mode == MULTI_FUNCTION_AFEX)
        u8                      mf_sub_mode;
#define IS_MF_UFP(bp)           (IS_MF_SD(bp) && \
                                 bp->mf_sub_mode == SUB_MF_MODE_UFP)
#define IS_MF_BD(bp)            (IS_MF_SD(bp) && \
                                 bp->mf_sub_mode == SUB_MF_MODE_BD)

        u8                      wol;

        int                     rx_ring_size;

        u16                     tx_quick_cons_trip_int;
        u16                     tx_quick_cons_trip;
        u16                     tx_ticks_int;
        u16                     tx_ticks;

        u16                     rx_quick_cons_trip_int;
        u16                     rx_quick_cons_trip;
        u16                     rx_ticks_int;
        u16                     rx_ticks;
/* Maximal coalescing timeout in us */
#define BNX2X_MAX_COALESCE_TOUT         (0xff*BNX2X_BTR)

        u32                     lin_cnt;

        u16                     state;
#define BNX2X_STATE_CLOSED              0
#define BNX2X_STATE_OPENING_WAIT4_LOAD  0x1000
#define BNX2X_STATE_OPENING_WAIT4_PORT  0x2000
#define BNX2X_STATE_OPEN                0x3000
#define BNX2X_STATE_CLOSING_WAIT4_HALT  0x4000
#define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000

#define BNX2X_STATE_DIAG                0xe000
#define BNX2X_STATE_ERROR               0xf000

#define BNX2X_MAX_PRIORITY              8
        int                     num_queues;
        uint                    num_ethernet_queues;
        uint                    num_cnic_queues;
        int                     disable_tpa;

        u32                     rx_mode;
#define BNX2X_RX_MODE_NONE              0
#define BNX2X_RX_MODE_NORMAL            1
#define BNX2X_RX_MODE_ALLMULTI          2
#define BNX2X_RX_MODE_PROMISC           3
#define BNX2X_MAX_MULTICAST             64

        u8                      igu_dsb_id;
        u8                      igu_base_sb;
        u8                      igu_sb_cnt;
        u8                      min_msix_vec_cnt;

        u32                     igu_base_addr;
        dma_addr_t              def_status_blk_mapping;

        struct bnx2x_slowpath   *slowpath;
        dma_addr_t              slowpath_mapping;

        /* Mechanism protecting the drv_info_to_mcp */
        struct mutex            drv_info_mutex;
        bool                    drv_info_mng_owner;

        /* Total number of FW statistics requests */
        u8                      fw_stats_num;

        /*
         * This is a memory buffer that will contain both statistics
         * ramrod request and data.
         */
        void                    *fw_stats;
        dma_addr_t              fw_stats_mapping;

        /*
         * FW statistics request shortcut (points at the
         * beginning of fw_stats buffer).
         */
        struct bnx2x_fw_stats_req       *fw_stats_req;
        dma_addr_t                      fw_stats_req_mapping;
        int                             fw_stats_req_sz;

        /*
         * FW statistics data shortcut (points at the beginning of
         * fw_stats buffer + fw_stats_req_sz).
         */
        struct bnx2x_fw_stats_data      *fw_stats_data;
        dma_addr_t                      fw_stats_data_mapping;
        int                             fw_stats_data_sz;

        /* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB
         * context size we need 8 ILT entries.
         */
#define ILT_MAX_L2_LINES        32
        struct hw_context       context[ILT_MAX_L2_LINES];

        struct bnx2x_ilt        *ilt;
#define BP_ILT(bp)              ((bp)->ilt)
#define ILT_MAX_LINES           256
/*
 * Maximum supported number of RSS queues: number of IGU SBs minus one that goes
 * to CNIC.
 */
#define BNX2X_MAX_RSS_COUNT(bp) ((bp)->igu_sb_cnt - CNIC_SUPPORT(bp))

/*
 * Maximum CID count that might be required by the bnx2x:
 * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
 */

#define BNX2X_L2_CID_COUNT(bp)  (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
                                + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define BNX2X_L2_MAX_CID(bp)    (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
                                + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define L2_ILT_LINES(bp)        (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
                                        ILT_PAGE_CIDS))

        int                     qm_cid_count;

        bool                    dropless_fc;

        void                    *t2;
        dma_addr_t              t2_mapping;
        struct cnic_ops __rcu   *cnic_ops;
        void                    *cnic_data;
        u32                     cnic_tag;
        struct cnic_eth_dev     cnic_eth_dev;
        union host_hc_status_block cnic_sb;
        dma_addr_t              cnic_sb_mapping;
        struct eth_spe          *cnic_kwq;
        struct eth_spe          *cnic_kwq_prod;
        struct eth_spe          *cnic_kwq_cons;
        struct eth_spe          *cnic_kwq_last;
        u16                     cnic_kwq_pending;
        u16                     cnic_spq_pending;
        u8                      fip_mac[ETH_ALEN];
        struct mutex            cnic_mutex;
        struct bnx2x_vlan_mac_obj iscsi_l2_mac_obj;

        /* Start index of the "special" (CNIC related) L2 clients */
        u8                              cnic_base_cl_id;

        int                     dmae_ready;
        /* used to synchronize dmae accesses */
        spinlock_t              dmae_lock;

        /* used to protect the FW mail box */
        struct mutex            fw_mb_mutex;

        /* used to synchronize stats collecting */
        int                     stats_state;

        /* used for synchronization of concurrent threads statistics handling */
        struct semaphore        stats_lock;

        /* used by dmae command loader */
        struct dmae_command     stats_dmae;
        int                     executer_idx;

        u16                     stats_counter;
        struct bnx2x_eth_stats  eth_stats;
        struct host_func_stats          func_stats;
        struct bnx2x_eth_stats_old      eth_stats_old;
        struct bnx2x_net_stats_old      net_stats_old;
        struct bnx2x_fw_port_stats_old  fw_stats_old;
        bool                    stats_init;

        struct z_stream_s       *strm;
        void                    *gunzip_buf;
        dma_addr_t              gunzip_mapping;
        int                     gunzip_outlen;
#define FW_BUF_SIZE                     0x8000
#define GUNZIP_BUF(bp)                  (bp->gunzip_buf)
#define GUNZIP_PHYS(bp)                 (bp->gunzip_mapping)
#define GUNZIP_OUTLEN(bp)               (bp->gunzip_outlen)

        struct raw_op           *init_ops;
        /* Init blocks offsets inside init_ops */
        u16                     *init_ops_offsets;
        /* Data blob - has 32 bit granularity */
        u32                     *init_data;
        u32                     init_mode_flags;
#define INIT_MODE_FLAGS(bp)     (bp->init_mode_flags)
        /* Zipped PRAM blobs - raw data */
        const u8                *tsem_int_table_data;
        const u8                *tsem_pram_data;
        const u8                *usem_int_table_data;
        const u8                *usem_pram_data;
        const u8                *xsem_int_table_data;
        const u8                *xsem_pram_data;
        const u8                *csem_int_table_data;
        const u8                *csem_pram_data;
#define INIT_OPS(bp)                    (bp->init_ops)
#define INIT_OPS_OFFSETS(bp)            (bp->init_ops_offsets)
#define INIT_DATA(bp)                   (bp->init_data)
#define INIT_TSEM_INT_TABLE_DATA(bp)    (bp->tsem_int_table_data)
#define INIT_TSEM_PRAM_DATA(bp)         (bp->tsem_pram_data)
#define INIT_USEM_INT_TABLE_DATA(bp)    (bp->usem_int_table_data)
#define INIT_USEM_PRAM_DATA(bp)         (bp->usem_pram_data)
#define INIT_XSEM_INT_TABLE_DATA(bp)    (bp->xsem_int_table_data)
#define INIT_XSEM_PRAM_DATA(bp)         (bp->xsem_pram_data)
#define INIT_CSEM_INT_TABLE_DATA(bp)    (bp->csem_int_table_data)
#define INIT_CSEM_PRAM_DATA(bp)         (bp->csem_pram_data)

#define PHY_FW_VER_LEN                  20
        char                    fw_ver[32];
        const struct firmware   *firmware;

        struct bnx2x_vfdb       *vfdb;
#define IS_SRIOV(bp)            ((bp)->vfdb)

        /* DCB support on/off */
        u16 dcb_state;
#define BNX2X_DCB_STATE_OFF                     0
#define BNX2X_DCB_STATE_ON                      1

        /* DCBX engine mode */
        int dcbx_enabled;
#define BNX2X_DCBX_ENABLED_OFF                  0
#define BNX2X_DCBX_ENABLED_ON_NEG_OFF           1
#define BNX2X_DCBX_ENABLED_ON_NEG_ON            2
#define BNX2X_DCBX_ENABLED_INVALID              (-1)

        bool dcbx_mode_uset;

        struct bnx2x_config_dcbx_params         dcbx_config_params;
        struct bnx2x_dcbx_port_params           dcbx_port_params;
        int                                     dcb_version;

        /* CAM credit pools */
        struct bnx2x_credit_pool_obj            vlans_pool;

        struct bnx2x_credit_pool_obj            macs_pool;

        /* RX_MODE object */
        struct bnx2x_rx_mode_obj                rx_mode_obj;

        /* MCAST object */
        struct bnx2x_mcast_obj                  mcast_obj;

        /* RSS configuration object */
        struct bnx2x_rss_config_obj             rss_conf_obj;

        /* Function State controlling object */
        struct bnx2x_func_sp_obj                func_obj;

        unsigned long                           sp_state;

        /* operation indication for the sp_rtnl task */
        unsigned long                           sp_rtnl_state;

        /* Indication of the IOV tasks */
        unsigned long                           iov_task_state;

        /* DCBX Negotiation results */
        struct dcbx_features                    dcbx_local_feat;
        u32                                     dcbx_error;

#ifdef BCM_DCBNL
        struct dcbx_features                    dcbx_remote_feat;
        u32                                     dcbx_remote_flags;
#endif
        /* AFEX: store default vlan used */
        int                                     afex_def_vlan_tag;
        enum mf_cfg_afex_vlan_mode              afex_vlan_mode;
        u32                                     pending_max;

        /* multiple tx classes of service */
        u8                                      max_cos;

        /* priority to cos mapping */
        u8                                      prio_to_cos[8];

        int fp_array_size;
        u32 dump_preset_idx;

        u8                                      phys_port_id[ETH_ALEN];

        /* PTP related context */
        struct ptp_clock *ptp_clock;
        struct ptp_clock_info ptp_clock_info;
        struct work_struct ptp_task;
        struct cyclecounter cyclecounter;
        struct timecounter timecounter;
        bool timecounter_init_done;
        struct sk_buff *ptp_tx_skb;
        unsigned long ptp_tx_start;
        bool hwtstamp_ioctl_called;
        u16 tx_type;
        u16 rx_filter;

        struct bnx2x_link_report_data           vf_link_vars;
        struct list_head vlan_reg;
        u16 vlan_cnt;
        u16 vlan_credit;
        bool accept_any_vlan;

        /* Vxlan/Geneve related information */
        struct bnx2x_udp_tunnel udp_tunnel_ports[BNX2X_UDP_PORT_MAX];
};

/* Tx queues may be less or equal to Rx queues */
extern int num_queues;
#define BNX2X_NUM_QUEUES(bp)    (bp->num_queues)
#define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues)
#define BNX2X_NUM_NON_CNIC_QUEUES(bp)   (BNX2X_NUM_QUEUES(bp) - \
                                         (bp)->num_cnic_queues)
#define BNX2X_NUM_RX_QUEUES(bp) BNX2X_NUM_QUEUES(bp)

#define is_multi(bp)            (BNX2X_NUM_QUEUES(bp) > 1)

#define BNX2X_MAX_QUEUES(bp)    BNX2X_MAX_RSS_COUNT(bp)
/* #define is_eth_multi(bp)     (BNX2X_NUM_ETH_QUEUES(bp) > 1) */

#define RSS_IPV4_CAP_MASK                                               \
        TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY

#define RSS_IPV4_TCP_CAP_MASK                                           \
        TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY

#define RSS_IPV6_CAP_MASK                                               \
        TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY

#define RSS_IPV6_TCP_CAP_MASK                                           \
        TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY

struct bnx2x_func_init_params {
        /* dma */
        bool            spq_active;
        dma_addr_t      spq_map;
        u16             spq_prod;

        u16             func_id;        /* abs fid */
        u16             pf_id;
};

#define for_each_cnic_queue(bp, var) \
        for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
             (var)++) \
                if (skip_queue(bp, var))        \
                        continue;               \
                else

#define for_each_eth_queue(bp, var) \
        for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)

#define for_each_nondefault_eth_queue(bp, var) \
        for ((var) = 1; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)

#define for_each_queue(bp, var) \
        for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
                if (skip_queue(bp, var))        \
                        continue;               \
                else

/* Skip forwarding FP */
#define for_each_valid_rx_queue(bp, var)                        \
        for ((var) = 0;                                         \
             (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :  \
                      BNX2X_NUM_ETH_QUEUES(bp));                \
             (var)++)                                           \
                if (skip_rx_queue(bp, var))                     \
                        continue;                               \
                else

#define for_each_rx_queue_cnic(bp, var) \
        for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
             (var)++) \
                if (skip_rx_queue(bp, var))     \
                        continue;               \
                else

#define for_each_rx_queue(bp, var) \
        for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
                if (skip_rx_queue(bp, var))     \
                        continue;               \
                else

/* Skip OOO FP */
#define for_each_valid_tx_queue(bp, var)                        \
        for ((var) = 0;                                         \
             (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :  \
                      BNX2X_NUM_ETH_QUEUES(bp));                \
             (var)++)                                           \
                if (skip_tx_queue(bp, var))                     \
                        continue;                               \
                else

#define for_each_tx_queue_cnic(bp, var) \
        for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
             (var)++) \
                if (skip_tx_queue(bp, var))     \
                        continue;               \
                else

#define for_each_tx_queue(bp, var) \
        for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
                if (skip_tx_queue(bp, var))     \
                        continue;               \
                else

#define for_each_nondefault_queue(bp, var) \
        for ((var) = 1; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
                if (skip_queue(bp, var))        \
                        continue;               \
                else

#define for_each_cos_in_tx_queue(fp, var) \
        for ((var) = 0; (var) < (fp)->max_cos; (var)++)

/* skip rx queue
 * if FCOE l2 support is disabled and this is the fcoe L2 queue
 */
#define skip_rx_queue(bp, idx)  (NO_FCOE(bp) && IS_FCOE_IDX(idx))

/* skip tx queue
 * if FCOE l2 support is disabled and this is the fcoe L2 queue
 */
#define skip_tx_queue(bp, idx)  (NO_FCOE(bp) && IS_FCOE_IDX(idx))

#define skip_queue(bp, idx)     (NO_FCOE(bp) && IS_FCOE_IDX(idx))

/**
 * bnx2x_set_mac_one - configure a single MAC address
 *
 * @bp:                 driver handle
 * @mac:                MAC to configure
 * @obj:                MAC object handle
 * @set:                if 'true' add a new MAC, otherwise - delete
 * @mac_type:           the type of the MAC to configure (e.g. ETH, UC list)
 * @ramrod_flags:       RAMROD_XXX flags (e.g. RAMROD_CONT, RAMROD_COMP_WAIT)
 *
 * Configures one MAC according to provided parameters or continues the
 * execution of previously scheduled commands if RAMROD_CONT is set in
 * ramrod_flags.
 *
 * Returns zero if operation has successfully completed, a positive value if the
 * operation has been successfully scheduled and a negative - if a requested
 * operations has failed.
 */
int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
                      struct bnx2x_vlan_mac_obj *obj, bool set,
                      int mac_type, unsigned long *ramrod_flags);

int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
                       struct bnx2x_vlan_mac_obj *obj, bool set,
                       unsigned long *ramrod_flags);

/**
 * bnx2x_del_all_macs - delete all MACs configured for the specific MAC object
 *
 * @bp:                 driver handle
 * @mac_obj:            MAC object handle

 * @mac_type:           type of the MACs to clear (BNX2X_XXX_MAC)
 * @wait_for_comp:      if 'true' block until completion
 *
 * Deletes all MACs of the specific type (e.g. ETH, UC list).
 *
 * Returns zero if operation has successfully completed, a positive value if the
 * operation has been successfully scheduled and a negative - if a requested
 * operations has failed.
 */
int bnx2x_del_all_macs(struct bnx2x *bp,
                       struct bnx2x_vlan_mac_obj *mac_obj,
                       int mac_type, bool wait_for_comp);

/* Init Function API  */
void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p);
void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
                    u8 vf_valid, int fw_sb_id, int igu_sb_id);
int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode);
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
void bnx2x_read_mf_cfg(struct bnx2x *bp);

int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val);

/* dmae */
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
                      u32 len32);
void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx);
u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type);
u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode);
u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
                      bool with_comp, u8 comp_type);

void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
                               u8 src_type, u8 dst_type);
int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
                               u32 *comp);

/* FLR related routines */
u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count);
int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt);
u8 bnx2x_is_pcie_pending(struct pci_dev *dev);
int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
                                    char *msg, u32 poll_cnt);

void bnx2x_calc_fc_adv(struct bnx2x *bp);
int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
                  u32 data_hi, u32 data_lo, int cmd_type);
void bnx2x_update_coalesce(struct bnx2x *bp);
int bnx2x_get_cur_phy_idx(struct bnx2x *bp);

bool bnx2x_port_after_undi(struct bnx2x *bp);

static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
                           int wait)
{
        u32 val;

        do {
                val = REG_RD(bp, reg);
                if (val == expected)
                        break;
                ms -= wait;
                msleep(wait);

        } while (ms > 0);

        return val;
}

void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
                            bool is_pf);

#define BNX2X_ILT_ZALLOC(x, y, size)                                    \
        x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL)

#define BNX2X_ILT_FREE(x, y, size) \
        do { \
                if (x) { \
                        dma_free_coherent(&bp->pdev->dev, size, x, y); \
                        x = NULL; \
                        y = 0; \
                } \
        } while (0)

#define ILOG2(x)        (ilog2((x)))

#define ILT_NUM_PAGE_ENTRIES    (3072)
/* In 57710/11 we use whole table since we have 8 func
 * In 57712 we have only 4 func, but use same size per func, then only half of
 * the table in use
 */
#define ILT_PER_FUNC            (ILT_NUM_PAGE_ENTRIES/8)

#define FUNC_ILT_BASE(func)     (func * ILT_PER_FUNC)
/*
 * the phys address is shifted right 12 bits and has an added
 * 1=valid bit added to the 53rd bit
 * then since this is a wide register(TM)
 * we split it into two 32 bit writes
 */
#define ONCHIP_ADDR1(x)         ((u32)(((u64)x >> 12) & 0xFFFFFFFF))
#define ONCHIP_ADDR2(x)         ((u32)((1 << 20) | ((u64)x >> 44)))

/* load/unload mode */
#define LOAD_NORMAL                     0
#define LOAD_OPEN                       1
#define LOAD_DIAG                       2
#define LOAD_LOOPBACK_EXT               3
#define UNLOAD_NORMAL                   0
#define UNLOAD_CLOSE                    1
#define UNLOAD_RECOVERY                 2

/* DMAE command defines */
#define DMAE_TIMEOUT                    -1
#define DMAE_PCI_ERROR                  -2      /* E2 and onward */
#define DMAE_NOT_RDY                    -3
#define DMAE_PCI_ERR_FLAG               0x80000000

#define DMAE_SRC_PCI                    0
#define DMAE_SRC_GRC                    1

#define DMAE_DST_NONE                   0
#define DMAE_DST_PCI                    1
#define DMAE_DST_GRC                    2

#define DMAE_COMP_PCI                   0
#define DMAE_COMP_GRC                   1

/* E2 and onward - PCI error handling in the completion */

#define DMAE_COMP_REGULAR               0
#define DMAE_COM_SET_ERR                1

#define DMAE_CMD_SRC_PCI                (DMAE_SRC_PCI << \
                                                DMAE_COMMAND_SRC_SHIFT)
#define DMAE_CMD_SRC_GRC                (DMAE_SRC_GRC << \
                                                DMAE_COMMAND_SRC_SHIFT)

#define DMAE_CMD_DST_PCI                (DMAE_DST_PCI << \
                                                DMAE_COMMAND_DST_SHIFT)
#define DMAE_CMD_DST_GRC                (DMAE_DST_GRC << \
                                                DMAE_COMMAND_DST_SHIFT)

#define DMAE_CMD_C_DST_PCI              (DMAE_COMP_PCI << \
                                                DMAE_COMMAND_C_DST_SHIFT)
#define DMAE_CMD_C_DST_GRC              (DMAE_COMP_GRC << \
                                                DMAE_COMMAND_C_DST_SHIFT)

#define DMAE_CMD_C_ENABLE               DMAE_COMMAND_C_TYPE_ENABLE

#define DMAE_CMD_ENDIANITY_NO_SWAP      (0 << DMAE_COMMAND_ENDIANITY_SHIFT)
#define DMAE_CMD_ENDIANITY_B_SWAP       (1 << DMAE_COMMAND_ENDIANITY_SHIFT)
#define DMAE_CMD_ENDIANITY_DW_SWAP      (2 << DMAE_COMMAND_ENDIANITY_SHIFT)
#define DMAE_CMD_ENDIANITY_B_DW_SWAP    (3 << DMAE_COMMAND_ENDIANITY_SHIFT)

#define DMAE_CMD_PORT_0                 0
#define DMAE_CMD_PORT_1                 DMAE_COMMAND_PORT

#define DMAE_CMD_SRC_RESET              DMAE_COMMAND_SRC_RESET
#define DMAE_CMD_DST_RESET              DMAE_COMMAND_DST_RESET
#define DMAE_CMD_E1HVN_SHIFT            DMAE_COMMAND_E1HVN_SHIFT

#define DMAE_SRC_PF                     0
#define DMAE_SRC_VF                     1

#define DMAE_DST_PF                     0
#define DMAE_DST_VF                     1

#define DMAE_C_SRC                      0
#define DMAE_C_DST                      1

#define DMAE_LEN32_RD_MAX               0x80
#define DMAE_LEN32_WR_MAX(bp)           (CHIP_IS_E1(bp) ? 0x400 : 0x2000)

#define DMAE_COMP_VAL                   0x60d0d0ae /* E2 and on - upper bit
                                                    * indicates error
                                                    */

#define MAX_DMAE_C_PER_PORT             8
#define INIT_DMAE_C(bp)                 (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
                                         BP_VN(bp))
#define PMF_DMAE_C(bp)                  (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
                                         E1HVN_MAX)

/* PCIE link and speed */
#define PCICFG_LINK_WIDTH               0x1f00000
#define PCICFG_LINK_WIDTH_SHIFT         20
#define PCICFG_LINK_SPEED               0xf0000
#define PCICFG_LINK_SPEED_SHIFT         16

#define BNX2X_NUM_TESTS_SF              7
#define BNX2X_NUM_TESTS_MF              3
#define BNX2X_NUM_TESTS(bp)             (IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \
                                             IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF)

#define BNX2X_PHY_LOOPBACK              0
#define BNX2X_MAC_LOOPBACK              1
#define BNX2X_EXT_LOOPBACK              2
#define BNX2X_PHY_LOOPBACK_FAILED       1
#define BNX2X_MAC_LOOPBACK_FAILED       2
#define BNX2X_EXT_LOOPBACK_FAILED       3
#define BNX2X_LOOPBACK_FAILED           (BNX2X_MAC_LOOPBACK_FAILED | \
                                         BNX2X_PHY_LOOPBACK_FAILED)

#define STROM_ASSERT_ARRAY_SIZE         50

/* must be used on a CID before placing it on a HW ring */
#define HW_CID(bp, x)                   ((BP_PORT(bp) << 23) | \
                                         (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
                                         (x))

#define SP_DESC_CNT             (BCM_PAGE_SIZE / sizeof(struct eth_spe))
#define MAX_SP_DESC_CNT                 (SP_DESC_CNT - 1)

#define BNX2X_BTR                       4
#define MAX_SPQ_PENDING                 8

/* CMNG constants, as derived from system spec calculations */
/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */
#define DEF_MIN_RATE                                    100
/* resolution of the rate shaping timer - 400 usec */
#define RS_PERIODIC_TIMEOUT_USEC                        400
/* number of bytes in single QM arbitration cycle -
 * coefficient for calculating the fairness timer */
#define QM_ARB_BYTES                                    160000
/* resolution of Min algorithm 1:100 */
#define MIN_RES                                         100
/* how many bytes above threshold for the minimal credit of Min algorithm*/
#define MIN_ABOVE_THRESH                                32768
/* Fairness algorithm integration time coefficient -
 * for calculating the actual Tfair */
#define T_FAIR_COEF     ((MIN_ABOVE_THRESH +  QM_ARB_BYTES) * 8 * MIN_RES)
/* Memory of fairness algorithm . 2 cycles */
#define FAIR_MEM                                        2

#define ATTN_NIG_FOR_FUNC               (1L << 8)
#define ATTN_SW_TIMER_4_FUNC            (1L << 9)
#define GPIO_2_FUNC                     (1L << 10)
#define GPIO_3_FUNC                     (1L << 11)
#define GPIO_4_FUNC                     (1L << 12)
#define ATTN_GENERAL_ATTN_1             (1L << 13)
#define ATTN_GENERAL_ATTN_2             (1L << 14)
#define ATTN_GENERAL_ATTN_3             (1L << 15)
#define ATTN_GENERAL_ATTN_4             (1L << 13)
#define ATTN_GENERAL_ATTN_5             (1L << 14)
#define ATTN_GENERAL_ATTN_6             (1L << 15)

#define ATTN_HARD_WIRED_MASK            0xff00
#define ATTENTION_ID                    4

#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \
                                 IS_MF_FCOE_AFEX(bp))

/* stuff added to make the code fit 80Col */

#define BNX2X_PMF_LINK_ASSERT \
        GENERAL_ATTEN_OFFSET(LINK_SYNC_ATTENTION_BIT_FUNC_0 + BP_FUNC(bp))

#define BNX2X_MC_ASSERT_BITS \
        (GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
         GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \
         GENERAL_ATTEN_OFFSET(CSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
         GENERAL_ATTEN_OFFSET(XSTORM_FATAL_ASSERT_ATTENTION_BIT))

#define BNX2X_MCP_ASSERT \
        GENERAL_ATTEN_OFFSET(MCP_FATAL_ASSERT_ATTENTION_BIT)

#define BNX2X_GRC_TIMEOUT       GENERAL_ATTEN_OFFSET(LATCHED_ATTN_TIMEOUT_GRC)
#define BNX2X_GRC_RSV           (GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCR) | \
                                 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCT) | \
                                 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCN) | \
                                 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCU) | \
                                 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \
                                 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC))

#define HW_INTERRUT_ASSERT_SET_0 \
                                (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT)
#define HW_PRTY_ASSERT_SET_0    (AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
#define HW_INTERRUT_ASSERT_SET_1 \
                                (AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT)
#define HW_PRTY_ASSERT_SET_1    (AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\
                             AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
#define HW_INTERRUT_ASSERT_SET_2 \
                                (AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
                                 AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \
                        AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\
                                 AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT)
#define HW_PRTY_ASSERT_SET_2    (AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR | \
                        AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\
                                 AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \
                                 AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)

#define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \
                (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
                 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
                 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)

#define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \
                              AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)

#define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \
                              AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)

#define MULTI_MASK                      0x7f

#define DEF_USB_FUNC_OFF        offsetof(struct cstorm_def_status_block_u, func)
#define DEF_CSB_FUNC_OFF        offsetof(struct cstorm_def_status_block_c, func)
#define DEF_XSB_FUNC_OFF        offsetof(struct xstorm_def_status_block, func)
#define DEF_TSB_FUNC_OFF        offsetof(struct tstorm_def_status_block, func)

#define DEF_USB_IGU_INDEX_OFF \
                        offsetof(struct cstorm_def_status_block_u, igu_index)
#define DEF_CSB_IGU_INDEX_OFF \
                        offsetof(struct cstorm_def_status_block_c, igu_index)
#define DEF_XSB_IGU_INDEX_OFF \
                        offsetof(struct xstorm_def_status_block, igu_index)
#define DEF_TSB_IGU_INDEX_OFF \
                        offsetof(struct tstorm_def_status_block, igu_index)

#define DEF_USB_SEGMENT_OFF \
                        offsetof(struct cstorm_def_status_block_u, segment)
#define DEF_CSB_SEGMENT_OFF \
                        offsetof(struct cstorm_def_status_block_c, segment)
#define DEF_XSB_SEGMENT_OFF \
                        offsetof(struct xstorm_def_status_block, segment)
#define DEF_TSB_SEGMENT_OFF \
                        offsetof(struct tstorm_def_status_block, segment)

#define BNX2X_SP_DSB_INDEX \
                (&bp->def_status_blk->sp_sb.\
                                        index_values[HC_SP_INDEX_ETH_DEF_CONS])

#define CAM_IS_INVALID(x) \
        (GET_FLAG(x.flags, \
        MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \
        (T_ETH_MAC_COMMAND_INVALIDATE))

/* Number of u32 elements in MC hash array */
#define MC_HASH_SIZE                    8
#define MC_HASH_OFFSET(bp, i)           (BAR_TSTRORM_INTMEM + \
        TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4)

#ifndef PXP2_REG_PXP2_INT_STS
#define PXP2_REG_PXP2_INT_STS           PXP2_REG_PXP2_INT_STS_0
#endif

#ifndef ETH_MAX_RX_CLIENTS_E2
#define ETH_MAX_RX_CLIENTS_E2           ETH_MAX_RX_CLIENTS_E1H
#endif

#define BNX2X_VPD_LEN                   128
#define VENDOR_ID_LEN                   4

#define VF_ACQUIRE_THRESH               3
#define VF_ACQUIRE_MAC_FILTERS          1
#define VF_ACQUIRE_MC_FILTERS           10
#define VF_ACQUIRE_VLAN_FILTERS         2 /* VLAN0 + 'real' VLAN */

#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \
                            (!((me_reg) & ME_REG_VF_ERR)))
int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);

/* Congestion management fairness mode */
#define CMNG_FNS_NONE                   0
#define CMNG_FNS_MINMAX                 1

#define HC_SEG_ACCESS_DEF               0   /*Driver decision 0-3*/
#define HC_SEG_ACCESS_ATTN              4
#define HC_SEG_ACCESS_NORM              0   /*Driver decision 0-1*/

static const u32 dmae_reg_go_c[] = {
        DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
        DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
        DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
        DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
};

void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
void bnx2x_notify_link_changed(struct bnx2x *bp);

#define BNX2X_MF_SD_PROTOCOL(bp) \
        ((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK)

#define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \
        (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI)

#define BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) \
        (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_FCOE)

#define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp))
#define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))
#define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp))

#define IS_MF_ISCSI_ONLY(bp)    (IS_MF_ISCSI_SD(bp) ||  IS_MF_ISCSI_SI(bp))

#define BNX2X_MF_EXT_PROTOCOL_MASK                                      \
                                (MACP_FUNC_CFG_FLAGS_ETHERNET |         \
                                 MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD |    \
                                 MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)

#define BNX2X_MF_EXT_PROT(bp)   ((bp)->mf_ext_config &                  \
                                 BNX2X_MF_EXT_PROTOCOL_MASK)

#define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)                              \
                (BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)

#define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)                               \
                (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)

#define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp)                              \
                (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD)

#define IS_MF_FCOE_AFEX(bp)                                             \
                (IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))

#define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)                           \
                                (IS_MF_SD(bp) &&                        \
                                 (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) ||  \
                                  BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))

#define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp)                           \
                                (IS_MF_SI(bp) &&                        \
                                 (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) || \
                                  BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)))

#define IS_MF_STORAGE_PERSONALITY_ONLY(bp)                              \
                        (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) ||       \
                         IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp))

/* Determines whether BW configuration arrives in 100Mb units or in
 * percentages from actual physical link speed.
 */
#define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp))

#define SET_FLAG(value, mask, flag) \
        do {\
                (value) &= ~(mask);\
                (value) |= ((flag) << (mask##_SHIFT));\
        } while (0)

#define GET_FLAG(value, mask) \
        (((value) & (mask)) >> (mask##_SHIFT))

#define GET_FIELD(value, fname) \
        (((value) & (fname##_MASK)) >> (fname##_SHIFT))

enum {
        SWITCH_UPDATE,
        AFEX_UPDATE,
};

#define NUM_MACS        8

void bnx2x_set_local_cmng(struct bnx2x *bp);

void bnx2x_update_mng_version(struct bnx2x *bp);

void bnx2x_update_mfw_dump(struct bnx2x *bp);

#define MCPR_SCRATCH_BASE(bp) \
        (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)

#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))

void bnx2x_init_ptp(struct bnx2x *bp);
int bnx2x_configure_ptp_filters(struct bnx2x *bp);
void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb);

#define BNX2X_MAX_PHC_DRIFT 31000000
#define BNX2X_PTP_TX_TIMEOUT

/* Re-configure all previously configured vlan filters.
 * Meant for implicit re-load flows.
 */
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);

#endif /* bnx2x.h */