linux/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
<<
>>
Prefs
   1/*************************************************************************
   2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3 *
   4 * Copyright (C) 2005 - 2011 Myricom, Inc.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions and the following disclaimer.
  12 * 2. Redistributions in binary form must reproduce the above copyright
  13 *    notice, this list of conditions and the following disclaimer in the
  14 *    documentation and/or other materials provided with the distribution.
  15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16 *    may be used to endorse or promote products derived from this software
  17 *    without specific prior written permission.
  18 *
  19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 * POSSIBILITY OF SUCH DAMAGE.
  30 *
  31 *
  32 * If the eeprom on your board is not recent enough, you will need to get a
  33 * newer firmware image at:
  34 *   http://www.myri.com/scs/download-Myri10GE.html
  35 *
  36 * Contact Information:
  37 *   <help@myri.com>
  38 *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39 *************************************************************************/
  40
  41#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  42
  43#include <linux/tcp.h>
  44#include <linux/netdevice.h>
  45#include <linux/skbuff.h>
  46#include <linux/string.h>
  47#include <linux/module.h>
  48#include <linux/pci.h>
  49#include <linux/dma-mapping.h>
  50#include <linux/etherdevice.h>
  51#include <linux/if_ether.h>
  52#include <linux/if_vlan.h>
  53#include <linux/dca.h>
  54#include <linux/ip.h>
  55#include <linux/inet.h>
  56#include <linux/in.h>
  57#include <linux/ethtool.h>
  58#include <linux/firmware.h>
  59#include <linux/delay.h>
  60#include <linux/timer.h>
  61#include <linux/vmalloc.h>
  62#include <linux/crc32.h>
  63#include <linux/moduleparam.h>
  64#include <linux/io.h>
  65#include <linux/log2.h>
  66#include <linux/slab.h>
  67#include <linux/prefetch.h>
  68#include <net/checksum.h>
  69#include <net/ip.h>
  70#include <net/tcp.h>
  71#include <asm/byteorder.h>
  72#include <asm/processor.h>
  73#include <net/busy_poll.h>
  74
  75#include "myri10ge_mcp.h"
  76#include "myri10ge_mcp_gen_header.h"
  77
  78#define MYRI10GE_VERSION_STR "1.5.3-1.534"
  79
  80MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  81MODULE_AUTHOR("Maintainer: help@myri.com");
  82MODULE_VERSION(MYRI10GE_VERSION_STR);
  83MODULE_LICENSE("Dual BSD/GPL");
  84
  85#define MYRI10GE_MAX_ETHER_MTU 9014
  86
  87#define MYRI10GE_ETH_STOPPED 0
  88#define MYRI10GE_ETH_STOPPING 1
  89#define MYRI10GE_ETH_STARTING 2
  90#define MYRI10GE_ETH_RUNNING 3
  91#define MYRI10GE_ETH_OPEN_FAILED 4
  92
  93#define MYRI10GE_EEPROM_STRINGS_SIZE 256
  94#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  95
  96#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
  97#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
  98
  99#define MYRI10GE_ALLOC_ORDER 0
 100#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 101#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 102
 103#define MYRI10GE_MAX_SLICES 32
 104
 105struct myri10ge_rx_buffer_state {
 106        struct page *page;
 107        int page_offset;
 108        DEFINE_DMA_UNMAP_ADDR(bus);
 109        DEFINE_DMA_UNMAP_LEN(len);
 110};
 111
 112struct myri10ge_tx_buffer_state {
 113        struct sk_buff *skb;
 114        int last;
 115        DEFINE_DMA_UNMAP_ADDR(bus);
 116        DEFINE_DMA_UNMAP_LEN(len);
 117};
 118
 119struct myri10ge_cmd {
 120        u32 data0;
 121        u32 data1;
 122        u32 data2;
 123};
 124
 125struct myri10ge_rx_buf {
 126        struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 127        struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 128        struct myri10ge_rx_buffer_state *info;
 129        struct page *page;
 130        dma_addr_t bus;
 131        int page_offset;
 132        int cnt;
 133        int fill_cnt;
 134        int alloc_fail;
 135        int mask;               /* number of rx slots -1 */
 136        int watchdog_needed;
 137};
 138
 139struct myri10ge_tx_buf {
 140        struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 141        __be32 __iomem *send_go;        /* "go" doorbell ptr */
 142        __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 143        struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 144        char *req_bytes;
 145        struct myri10ge_tx_buffer_state *info;
 146        int mask;               /* number of transmit slots -1  */
 147        int req ____cacheline_aligned;  /* transmit slots submitted     */
 148        int pkt_start;          /* packets started */
 149        int stop_queue;
 150        int linearized;
 151        int done ____cacheline_aligned; /* transmit slots completed     */
 152        int pkt_done;           /* packets completed */
 153        int wake_queue;
 154        int queue_active;
 155};
 156
 157struct myri10ge_rx_done {
 158        struct mcp_slot *entry;
 159        dma_addr_t bus;
 160        int cnt;
 161        int idx;
 162};
 163
 164struct myri10ge_slice_netstats {
 165        unsigned long rx_packets;
 166        unsigned long tx_packets;
 167        unsigned long rx_bytes;
 168        unsigned long tx_bytes;
 169        unsigned long rx_dropped;
 170        unsigned long tx_dropped;
 171};
 172
 173struct myri10ge_slice_state {
 174        struct myri10ge_tx_buf tx;      /* transmit ring        */
 175        struct myri10ge_rx_buf rx_small;
 176        struct myri10ge_rx_buf rx_big;
 177        struct myri10ge_rx_done rx_done;
 178        struct net_device *dev;
 179        struct napi_struct napi;
 180        struct myri10ge_priv *mgp;
 181        struct myri10ge_slice_netstats stats;
 182        __be32 __iomem *irq_claim;
 183        struct mcp_irq_data *fw_stats;
 184        dma_addr_t fw_stats_bus;
 185        int watchdog_tx_done;
 186        int watchdog_tx_req;
 187        int watchdog_rx_done;
 188        int stuck;
 189#ifdef CONFIG_MYRI10GE_DCA
 190        int cached_dca_tag;
 191        int cpu;
 192        __be32 __iomem *dca_tag;
 193#endif
 194#ifdef CONFIG_NET_RX_BUSY_POLL
 195        unsigned int state;
 196#define SLICE_STATE_IDLE        0
 197#define SLICE_STATE_NAPI        1       /* NAPI owns this slice */
 198#define SLICE_STATE_POLL        2       /* poll owns this slice */
 199#define SLICE_LOCKED (SLICE_STATE_NAPI | SLICE_STATE_POLL)
 200#define SLICE_STATE_NAPI_YIELD  4       /* NAPI yielded this slice */
 201#define SLICE_STATE_POLL_YIELD  8       /* poll yielded this slice */
 202#define SLICE_USER_PEND (SLICE_STATE_POLL | SLICE_STATE_POLL_YIELD)
 203        spinlock_t lock;
 204        unsigned long lock_napi_yield;
 205        unsigned long lock_poll_yield;
 206        unsigned long busy_poll_miss;
 207        unsigned long busy_poll_cnt;
 208#endif /* CONFIG_NET_RX_BUSY_POLL */
 209        char irq_desc[32];
 210};
 211
 212struct myri10ge_priv {
 213        struct myri10ge_slice_state *ss;
 214        int tx_boundary;        /* boundary transmits cannot cross */
 215        int num_slices;
 216        int running;            /* running?             */
 217        int small_bytes;
 218        int big_bytes;
 219        int max_intr_slots;
 220        struct net_device *dev;
 221        u8 __iomem *sram;
 222        int sram_size;
 223        unsigned long board_span;
 224        unsigned long iomem_base;
 225        __be32 __iomem *irq_deassert;
 226        char *mac_addr_string;
 227        struct mcp_cmd_response *cmd;
 228        dma_addr_t cmd_bus;
 229        struct pci_dev *pdev;
 230        int msi_enabled;
 231        int msix_enabled;
 232        struct msix_entry *msix_vectors;
 233#ifdef CONFIG_MYRI10GE_DCA
 234        int dca_enabled;
 235        int relaxed_order;
 236#endif
 237        u32 link_state;
 238        unsigned int rdma_tags_available;
 239        int intr_coal_delay;
 240        __be32 __iomem *intr_coal_delay_ptr;
 241        int wc_cookie;
 242        int down_cnt;
 243        wait_queue_head_t down_wq;
 244        struct work_struct watchdog_work;
 245        struct timer_list watchdog_timer;
 246        int watchdog_resets;
 247        int watchdog_pause;
 248        int pause;
 249        bool fw_name_allocated;
 250        char *fw_name;
 251        char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 252        char *product_code_string;
 253        char fw_version[128];
 254        int fw_ver_major;
 255        int fw_ver_minor;
 256        int fw_ver_tiny;
 257        int adopted_rx_filter_bug;
 258        u8 mac_addr[ETH_ALEN];          /* eeprom mac address */
 259        unsigned long serial_number;
 260        int vendor_specific_offset;
 261        int fw_multicast_support;
 262        u32 features;
 263        u32 max_tso6;
 264        u32 read_dma;
 265        u32 write_dma;
 266        u32 read_write_dma;
 267        u32 link_changes;
 268        u32 msg_enable;
 269        unsigned int board_number;
 270        int rebooted;
 271};
 272
 273static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 274static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 275static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 276static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 277MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
 278MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
 279MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
 280MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 281
 282/* Careful: must be accessed under kernel_param_lock() */
 283static char *myri10ge_fw_name = NULL;
 284module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 285MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 286
 287#define MYRI10GE_MAX_BOARDS 8
 288static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
 289    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
 290module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
 291                         0444);
 292MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
 293
 294static int myri10ge_ecrc_enable = 1;
 295module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 296MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 297
 298static int myri10ge_small_bytes = -1;   /* -1 == auto */
 299module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
 300MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 301
 302static int myri10ge_msi = 1;    /* enable msi by default */
 303module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
 304MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 305
 306static int myri10ge_intr_coal_delay = 75;
 307module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
 308MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 309
 310static int myri10ge_flow_control = 1;
 311module_param(myri10ge_flow_control, int, S_IRUGO);
 312MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 313
 314static int myri10ge_deassert_wait = 1;
 315module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
 316MODULE_PARM_DESC(myri10ge_deassert_wait,
 317                 "Wait when deasserting legacy interrupts");
 318
 319static int myri10ge_force_firmware = 0;
 320module_param(myri10ge_force_firmware, int, S_IRUGO);
 321MODULE_PARM_DESC(myri10ge_force_firmware,
 322                 "Force firmware to assume aligned completions");
 323
 324static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 325module_param(myri10ge_initial_mtu, int, S_IRUGO);
 326MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 327
 328static int myri10ge_napi_weight = 64;
 329module_param(myri10ge_napi_weight, int, S_IRUGO);
 330MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 331
 332static int myri10ge_watchdog_timeout = 1;
 333module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
 334MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 335
 336static int myri10ge_max_irq_loops = 1048576;
 337module_param(myri10ge_max_irq_loops, int, S_IRUGO);
 338MODULE_PARM_DESC(myri10ge_max_irq_loops,
 339                 "Set stuck legacy IRQ detection threshold");
 340
 341#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 342
 343static int myri10ge_debug = -1; /* defaults above */
 344module_param(myri10ge_debug, int, 0);
 345MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 346
 347static int myri10ge_fill_thresh = 256;
 348module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 349MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 350
 351static int myri10ge_reset_recover = 1;
 352
 353static int myri10ge_max_slices = 1;
 354module_param(myri10ge_max_slices, int, S_IRUGO);
 355MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 356
 357static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
 358module_param(myri10ge_rss_hash, int, S_IRUGO);
 359MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 360
 361static int myri10ge_dca = 1;
 362module_param(myri10ge_dca, int, S_IRUGO);
 363MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 364
 365#define MYRI10GE_FW_OFFSET 1024*1024
 366#define MYRI10GE_HIGHPART_TO_U32(X) \
 367(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 368#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 369
 370#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 371
 372static void myri10ge_set_multicast_list(struct net_device *dev);
 373static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
 374                                         struct net_device *dev);
 375
 376static inline void put_be32(__be32 val, __be32 __iomem * p)
 377{
 378        __raw_writel((__force __u32) val, (__force void __iomem *)p);
 379}
 380
 381static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
 382                                                    struct rtnl_link_stats64 *stats);
 383
 384static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
 385{
 386        if (mgp->fw_name_allocated)
 387                kfree(mgp->fw_name);
 388        mgp->fw_name = name;
 389        mgp->fw_name_allocated = allocated;
 390}
 391
 392static int
 393myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 394                  struct myri10ge_cmd *data, int atomic)
 395{
 396        struct mcp_cmd *buf;
 397        char buf_bytes[sizeof(*buf) + 8];
 398        struct mcp_cmd_response *response = mgp->cmd;
 399        char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 400        u32 dma_low, dma_high, result, value;
 401        int sleep_total = 0;
 402
 403        /* ensure buf is aligned to 8 bytes */
 404        buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 405
 406        buf->data0 = htonl(data->data0);
 407        buf->data1 = htonl(data->data1);
 408        buf->data2 = htonl(data->data2);
 409        buf->cmd = htonl(cmd);
 410        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 411        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 412
 413        buf->response_addr.low = htonl(dma_low);
 414        buf->response_addr.high = htonl(dma_high);
 415        response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 416        mb();
 417        myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 418
 419        /* wait up to 15ms. Longest command is the DMA benchmark,
 420         * which is capped at 5ms, but runs from a timeout handler
 421         * that runs every 7.8ms. So a 15ms timeout leaves us with
 422         * a 2.2ms margin
 423         */
 424        if (atomic) {
 425                /* if atomic is set, do not sleep,
 426                 * and try to get the completion quickly
 427                 * (1ms will be enough for those commands) */
 428                for (sleep_total = 0;
 429                     sleep_total < 1000 &&
 430                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 431                     sleep_total += 10) {
 432                        udelay(10);
 433                        mb();
 434                }
 435        } else {
 436                /* use msleep for most command */
 437                for (sleep_total = 0;
 438                     sleep_total < 15 &&
 439                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 440                     sleep_total++)
 441                        msleep(1);
 442        }
 443
 444        result = ntohl(response->result);
 445        value = ntohl(response->data);
 446        if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 447                if (result == 0) {
 448                        data->data0 = value;
 449                        return 0;
 450                } else if (result == MXGEFW_CMD_UNKNOWN) {
 451                        return -ENOSYS;
 452                } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 453                        return -E2BIG;
 454                } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 455                           cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 456                           (data->
 457                            data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 458                           0) {
 459                        return -ERANGE;
 460                } else {
 461                        dev_err(&mgp->pdev->dev,
 462                                "command %d failed, result = %d\n",
 463                                cmd, result);
 464                        return -ENXIO;
 465                }
 466        }
 467
 468        dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 469                cmd, result);
 470        return -EAGAIN;
 471}
 472
 473/*
 474 * The eeprom strings on the lanaiX have the format
 475 * SN=x\0
 476 * MAC=x:x:x:x:x:x\0
 477 * PT:ddd mmm xx xx:xx:xx xx\0
 478 * PV:ddd mmm xx xx:xx:xx xx\0
 479 */
 480static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 481{
 482        char *ptr, *limit;
 483        int i;
 484
 485        ptr = mgp->eeprom_strings;
 486        limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 487
 488        while (*ptr != '\0' && ptr < limit) {
 489                if (memcmp(ptr, "MAC=", 4) == 0) {
 490                        ptr += 4;
 491                        mgp->mac_addr_string = ptr;
 492                        for (i = 0; i < 6; i++) {
 493                                if ((ptr + 2) > limit)
 494                                        goto abort;
 495                                mgp->mac_addr[i] =
 496                                    simple_strtoul(ptr, &ptr, 16);
 497                                ptr += 1;
 498                        }
 499                }
 500                if (memcmp(ptr, "PC=", 3) == 0) {
 501                        ptr += 3;
 502                        mgp->product_code_string = ptr;
 503                }
 504                if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 505                        ptr += 3;
 506                        mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 507                }
 508                while (ptr < limit && *ptr++) ;
 509        }
 510
 511        return 0;
 512
 513abort:
 514        dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 515        return -ENXIO;
 516}
 517
 518/*
 519 * Enable or disable periodic RDMAs from the host to make certain
 520 * chipsets resend dropped PCIe messages
 521 */
 522
 523static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 524{
 525        char __iomem *submit;
 526        __be32 buf[16] __attribute__ ((__aligned__(8)));
 527        u32 dma_low, dma_high;
 528        int i;
 529
 530        /* clear confirmation addr */
 531        mgp->cmd->data = 0;
 532        mb();
 533
 534        /* send a rdma command to the PCIe engine, and wait for the
 535         * response in the confirmation address.  The firmware should
 536         * write a -1 there to indicate it is alive and well
 537         */
 538        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 539        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 540
 541        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 542        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 543        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 544        buf[3] = htonl(dma_high);       /* dummy addr MSW */
 545        buf[4] = htonl(dma_low);        /* dummy addr LSW */
 546        buf[5] = htonl(enable); /* enable? */
 547
 548        submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 549
 550        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 551        for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 552                msleep(1);
 553        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 554                dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 555                        (enable ? "enable" : "disable"));
 556}
 557
 558static int
 559myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 560                           struct mcp_gen_header *hdr)
 561{
 562        struct device *dev = &mgp->pdev->dev;
 563
 564        /* check firmware type */
 565        if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 566                dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 567                return -EINVAL;
 568        }
 569
 570        /* save firmware version for ethtool */
 571        strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 572        mgp->fw_version[sizeof(mgp->fw_version) - 1] = '\0';
 573
 574        sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 575               &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 576
 577        if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
 578              mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 579                dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 580                dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 581                        MXGEFW_VERSION_MINOR);
 582                return -EINVAL;
 583        }
 584        return 0;
 585}
 586
 587static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 588{
 589        unsigned crc, reread_crc;
 590        const struct firmware *fw;
 591        struct device *dev = &mgp->pdev->dev;
 592        unsigned char *fw_readback;
 593        struct mcp_gen_header *hdr;
 594        size_t hdr_offset;
 595        int status;
 596        unsigned i;
 597
 598        if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 599                dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 600                        mgp->fw_name);
 601                status = -EINVAL;
 602                goto abort_with_nothing;
 603        }
 604
 605        /* check size */
 606
 607        if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 608            fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 609                dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 610                status = -EINVAL;
 611                goto abort_with_fw;
 612        }
 613
 614        /* check id */
 615        hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 616        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 617                dev_err(dev, "Bad firmware file\n");
 618                status = -EINVAL;
 619                goto abort_with_fw;
 620        }
 621        hdr = (void *)(fw->data + hdr_offset);
 622
 623        status = myri10ge_validate_firmware(mgp, hdr);
 624        if (status != 0)
 625                goto abort_with_fw;
 626
 627        crc = crc32(~0, fw->data, fw->size);
 628        for (i = 0; i < fw->size; i += 256) {
 629                myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 630                                  fw->data + i,
 631                                  min(256U, (unsigned)(fw->size - i)));
 632                mb();
 633                readb(mgp->sram);
 634        }
 635        fw_readback = vmalloc(fw->size);
 636        if (!fw_readback) {
 637                status = -ENOMEM;
 638                goto abort_with_fw;
 639        }
 640        /* corruption checking is good for parity recovery and buggy chipset */
 641        memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 642        reread_crc = crc32(~0, fw_readback, fw->size);
 643        vfree(fw_readback);
 644        if (crc != reread_crc) {
 645                dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 646                        (unsigned)fw->size, reread_crc, crc);
 647                status = -EIO;
 648                goto abort_with_fw;
 649        }
 650        *size = (u32) fw->size;
 651
 652abort_with_fw:
 653        release_firmware(fw);
 654
 655abort_with_nothing:
 656        return status;
 657}
 658
 659static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 660{
 661        struct mcp_gen_header *hdr;
 662        struct device *dev = &mgp->pdev->dev;
 663        const size_t bytes = sizeof(struct mcp_gen_header);
 664        size_t hdr_offset;
 665        int status;
 666
 667        /* find running firmware header */
 668        hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 669
 670        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 671                dev_err(dev, "Running firmware has bad header offset (%d)\n",
 672                        (int)hdr_offset);
 673                return -EIO;
 674        }
 675
 676        /* copy header of running firmware from SRAM to host memory to
 677         * validate firmware */
 678        hdr = kmalloc(bytes, GFP_KERNEL);
 679        if (hdr == NULL)
 680                return -ENOMEM;
 681
 682        memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 683        status = myri10ge_validate_firmware(mgp, hdr);
 684        kfree(hdr);
 685
 686        /* check to see if adopted firmware has bug where adopting
 687         * it will cause broadcasts to be filtered unless the NIC
 688         * is kept in ALLMULTI mode */
 689        if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 690            mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 691                mgp->adopted_rx_filter_bug = 1;
 692                dev_warn(dev, "Adopting fw %d.%d.%d: "
 693                         "working around rx filter bug\n",
 694                         mgp->fw_ver_major, mgp->fw_ver_minor,
 695                         mgp->fw_ver_tiny);
 696        }
 697        return status;
 698}
 699
 700static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 701{
 702        struct myri10ge_cmd cmd;
 703        int status;
 704
 705        /* probe for IPv6 TSO support */
 706        mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 707        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 708                                   &cmd, 0);
 709        if (status == 0) {
 710                mgp->max_tso6 = cmd.data0;
 711                mgp->features |= NETIF_F_TSO6;
 712        }
 713
 714        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 715        if (status != 0) {
 716                dev_err(&mgp->pdev->dev,
 717                        "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 718                return -ENXIO;
 719        }
 720
 721        mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 722
 723        return 0;
 724}
 725
 726static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 727{
 728        char __iomem *submit;
 729        __be32 buf[16] __attribute__ ((__aligned__(8)));
 730        u32 dma_low, dma_high, size;
 731        int status, i;
 732
 733        size = 0;
 734        status = myri10ge_load_hotplug_firmware(mgp, &size);
 735        if (status) {
 736                if (!adopt)
 737                        return status;
 738                dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 739
 740                /* Do not attempt to adopt firmware if there
 741                 * was a bad crc */
 742                if (status == -EIO)
 743                        return status;
 744
 745                status = myri10ge_adopt_running_firmware(mgp);
 746                if (status != 0) {
 747                        dev_err(&mgp->pdev->dev,
 748                                "failed to adopt running firmware\n");
 749                        return status;
 750                }
 751                dev_info(&mgp->pdev->dev,
 752                         "Successfully adopted running firmware\n");
 753                if (mgp->tx_boundary == 4096) {
 754                        dev_warn(&mgp->pdev->dev,
 755                                 "Using firmware currently running on NIC"
 756                                 ".  For optimal\n");
 757                        dev_warn(&mgp->pdev->dev,
 758                                 "performance consider loading optimized "
 759                                 "firmware\n");
 760                        dev_warn(&mgp->pdev->dev, "via hotplug\n");
 761                }
 762
 763                set_fw_name(mgp, "adopted", false);
 764                mgp->tx_boundary = 2048;
 765                myri10ge_dummy_rdma(mgp, 1);
 766                status = myri10ge_get_firmware_capabilities(mgp);
 767                return status;
 768        }
 769
 770        /* clear confirmation addr */
 771        mgp->cmd->data = 0;
 772        mb();
 773
 774        /* send a reload command to the bootstrap MCP, and wait for the
 775         *  response in the confirmation address.  The firmware should
 776         * write a -1 there to indicate it is alive and well
 777         */
 778        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 779        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 780
 781        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 782        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 783        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 784
 785        /* FIX: All newest firmware should un-protect the bottom of
 786         * the sram before handoff. However, the very first interfaces
 787         * do not. Therefore the handoff copy must skip the first 8 bytes
 788         */
 789        buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 790        buf[4] = htonl(size - 8);       /* length of code */
 791        buf[5] = htonl(8);      /* where to copy to */
 792        buf[6] = htonl(0);      /* where to jump to */
 793
 794        submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 795
 796        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 797        mb();
 798        msleep(1);
 799        mb();
 800        i = 0;
 801        while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 802                msleep(1 << i);
 803                i++;
 804        }
 805        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 806                dev_err(&mgp->pdev->dev, "handoff failed\n");
 807                return -ENXIO;
 808        }
 809        myri10ge_dummy_rdma(mgp, 1);
 810        status = myri10ge_get_firmware_capabilities(mgp);
 811
 812        return status;
 813}
 814
 815static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 816{
 817        struct myri10ge_cmd cmd;
 818        int status;
 819
 820        cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 821                     | (addr[2] << 8) | addr[3]);
 822
 823        cmd.data1 = ((addr[4] << 8) | (addr[5]));
 824
 825        status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 826        return status;
 827}
 828
 829static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 830{
 831        struct myri10ge_cmd cmd;
 832        int status, ctl;
 833
 834        ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 835        status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 836
 837        if (status) {
 838                netdev_err(mgp->dev, "Failed to set flow control mode\n");
 839                return status;
 840        }
 841        mgp->pause = pause;
 842        return 0;
 843}
 844
 845static void
 846myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 847{
 848        struct myri10ge_cmd cmd;
 849        int status, ctl;
 850
 851        ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 852        status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 853        if (status)
 854                netdev_err(mgp->dev, "Failed to set promisc mode\n");
 855}
 856
 857static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 858{
 859        struct myri10ge_cmd cmd;
 860        int status;
 861        u32 len;
 862        struct page *dmatest_page;
 863        dma_addr_t dmatest_bus;
 864        char *test = " ";
 865
 866        dmatest_page = alloc_page(GFP_KERNEL);
 867        if (!dmatest_page)
 868                return -ENOMEM;
 869        dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 870                                   DMA_BIDIRECTIONAL);
 871        if (unlikely(pci_dma_mapping_error(mgp->pdev, dmatest_bus))) {
 872                __free_page(dmatest_page);
 873                return -ENOMEM;
 874        }
 875
 876        /* Run a small DMA test.
 877         * The magic multipliers to the length tell the firmware
 878         * to do DMA read, write, or read+write tests.  The
 879         * results are returned in cmd.data0.  The upper 16
 880         * bits or the return is the number of transfers completed.
 881         * The lower 16 bits is the time in 0.5us ticks that the
 882         * transfers took to complete.
 883         */
 884
 885        len = mgp->tx_boundary;
 886
 887        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 888        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 889        cmd.data2 = len * 0x10000;
 890        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 891        if (status != 0) {
 892                test = "read";
 893                goto abort;
 894        }
 895        mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 896        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 897        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 898        cmd.data2 = len * 0x1;
 899        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 900        if (status != 0) {
 901                test = "write";
 902                goto abort;
 903        }
 904        mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 905
 906        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 907        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 908        cmd.data2 = len * 0x10001;
 909        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 910        if (status != 0) {
 911                test = "read/write";
 912                goto abort;
 913        }
 914        mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 915            (cmd.data0 & 0xffff);
 916
 917abort:
 918        pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 919        put_page(dmatest_page);
 920
 921        if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 922                dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 923                         test, status);
 924
 925        return status;
 926}
 927
 928#ifdef CONFIG_NET_RX_BUSY_POLL
 929static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
 930{
 931        spin_lock_init(&ss->lock);
 932        ss->state = SLICE_STATE_IDLE;
 933}
 934
 935static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
 936{
 937        bool rc = true;
 938        spin_lock(&ss->lock);
 939        if ((ss->state & SLICE_LOCKED)) {
 940                WARN_ON((ss->state & SLICE_STATE_NAPI));
 941                ss->state |= SLICE_STATE_NAPI_YIELD;
 942                rc = false;
 943                ss->lock_napi_yield++;
 944        } else
 945                ss->state = SLICE_STATE_NAPI;
 946        spin_unlock(&ss->lock);
 947        return rc;
 948}
 949
 950static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
 951{
 952        spin_lock(&ss->lock);
 953        WARN_ON((ss->state & (SLICE_STATE_POLL | SLICE_STATE_NAPI_YIELD)));
 954        ss->state = SLICE_STATE_IDLE;
 955        spin_unlock(&ss->lock);
 956}
 957
 958static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
 959{
 960        bool rc = true;
 961        spin_lock_bh(&ss->lock);
 962        if ((ss->state & SLICE_LOCKED)) {
 963                ss->state |= SLICE_STATE_POLL_YIELD;
 964                rc = false;
 965                ss->lock_poll_yield++;
 966        } else
 967                ss->state |= SLICE_STATE_POLL;
 968        spin_unlock_bh(&ss->lock);
 969        return rc;
 970}
 971
 972static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
 973{
 974        spin_lock_bh(&ss->lock);
 975        WARN_ON((ss->state & SLICE_STATE_NAPI));
 976        ss->state = SLICE_STATE_IDLE;
 977        spin_unlock_bh(&ss->lock);
 978}
 979
 980static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
 981{
 982        WARN_ON(!(ss->state & SLICE_LOCKED));
 983        return (ss->state & SLICE_USER_PEND);
 984}
 985#else /* CONFIG_NET_RX_BUSY_POLL */
 986static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
 987{
 988}
 989
 990static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
 991{
 992        return false;
 993}
 994
 995static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
 996{
 997}
 998
 999static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
1000{
1001        return false;
1002}
1003
1004static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
1005{
1006}
1007
1008static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
1009{
1010        return false;
1011}
1012#endif
1013
1014static int myri10ge_reset(struct myri10ge_priv *mgp)
1015{
1016        struct myri10ge_cmd cmd;
1017        struct myri10ge_slice_state *ss;
1018        int i, status;
1019        size_t bytes;
1020#ifdef CONFIG_MYRI10GE_DCA
1021        unsigned long dca_tag_off;
1022#endif
1023
1024        /* try to send a reset command to the card to see if it
1025         * is alive */
1026        memset(&cmd, 0, sizeof(cmd));
1027        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
1028        if (status != 0) {
1029                dev_err(&mgp->pdev->dev, "failed reset\n");
1030                return -ENXIO;
1031        }
1032
1033        (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
1034        /*
1035         * Use non-ndis mcp_slot (eg, 4 bytes total,
1036         * no toeplitz hash value returned.  Older firmware will
1037         * not understand this command, but will use the correct
1038         * sized mcp_slot, so we ignore error returns
1039         */
1040        cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
1041        (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
1042
1043        /* Now exchange information about interrupts  */
1044
1045        bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
1046        cmd.data0 = (u32) bytes;
1047        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
1048
1049        /*
1050         * Even though we already know how many slices are supported
1051         * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
1052         * has magic side effects, and must be called after a reset.
1053         * It must be called prior to calling any RSS related cmds,
1054         * including assigning an interrupt queue for anything but
1055         * slice 0.  It must also be called *after*
1056         * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
1057         * the firmware to compute offsets.
1058         */
1059
1060        if (mgp->num_slices > 1) {
1061
1062                /* ask the maximum number of slices it supports */
1063                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
1064                                           &cmd, 0);
1065                if (status != 0) {
1066                        dev_err(&mgp->pdev->dev,
1067                                "failed to get number of slices\n");
1068                }
1069
1070                /*
1071                 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
1072                 * to setting up the interrupt queue DMA
1073                 */
1074
1075                cmd.data0 = mgp->num_slices;
1076                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
1077                if (mgp->dev->real_num_tx_queues > 1)
1078                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
1079                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
1080                                           &cmd, 0);
1081
1082                /* Firmware older than 1.4.32 only supports multiple
1083                 * RX queues, so if we get an error, first retry using a
1084                 * single TX queue before giving up */
1085                if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
1086                        netif_set_real_num_tx_queues(mgp->dev, 1);
1087                        cmd.data0 = mgp->num_slices;
1088                        cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
1089                        status = myri10ge_send_cmd(mgp,
1090                                                   MXGEFW_CMD_ENABLE_RSS_QUEUES,
1091                                                   &cmd, 0);
1092                }
1093
1094                if (status != 0) {
1095                        dev_err(&mgp->pdev->dev,
1096                                "failed to set number of slices\n");
1097
1098                        return status;
1099                }
1100        }
1101        for (i = 0; i < mgp->num_slices; i++) {
1102                ss = &mgp->ss[i];
1103                cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
1104                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
1105                cmd.data2 = i;
1106                status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1107                                            &cmd, 0);
1108        }
1109
1110        status |=
1111            myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1112        for (i = 0; i < mgp->num_slices; i++) {
1113                ss = &mgp->ss[i];
1114                ss->irq_claim =
1115                    (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1116        }
1117        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1118                                    &cmd, 0);
1119        mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1120
1121        status |= myri10ge_send_cmd
1122            (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1123        mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1124        if (status != 0) {
1125                dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1126                return status;
1127        }
1128        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1129
1130#ifdef CONFIG_MYRI10GE_DCA
1131        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1132        dca_tag_off = cmd.data0;
1133        for (i = 0; i < mgp->num_slices; i++) {
1134                ss = &mgp->ss[i];
1135                if (status == 0) {
1136                        ss->dca_tag = (__iomem __be32 *)
1137                            (mgp->sram + dca_tag_off + 4 * i);
1138                } else {
1139                        ss->dca_tag = NULL;
1140                }
1141        }
1142#endif                          /* CONFIG_MYRI10GE_DCA */
1143
1144        /* reset mcp/driver shared state back to 0 */
1145
1146        mgp->link_changes = 0;
1147        for (i = 0; i < mgp->num_slices; i++) {
1148                ss = &mgp->ss[i];
1149
1150                memset(ss->rx_done.entry, 0, bytes);
1151                ss->tx.req = 0;
1152                ss->tx.done = 0;
1153                ss->tx.pkt_start = 0;
1154                ss->tx.pkt_done = 0;
1155                ss->rx_big.cnt = 0;
1156                ss->rx_small.cnt = 0;
1157                ss->rx_done.idx = 0;
1158                ss->rx_done.cnt = 0;
1159                ss->tx.wake_queue = 0;
1160                ss->tx.stop_queue = 0;
1161        }
1162
1163        status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1164        myri10ge_change_pause(mgp, mgp->pause);
1165        myri10ge_set_multicast_list(mgp->dev);
1166        return status;
1167}
1168
1169#ifdef CONFIG_MYRI10GE_DCA
1170static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
1171{
1172        int ret;
1173        u16 ctl;
1174
1175        pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
1176
1177        ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
1178        if (ret != on) {
1179                ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
1180                ctl |= (on << 4);
1181                pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
1182        }
1183        return ret;
1184}
1185
1186static void
1187myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1188{
1189        ss->cached_dca_tag = tag;
1190        put_be32(htonl(tag), ss->dca_tag);
1191}
1192
1193static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1194{
1195        int cpu = get_cpu();
1196        int tag;
1197
1198        if (cpu != ss->cpu) {
1199                tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
1200                if (ss->cached_dca_tag != tag)
1201                        myri10ge_write_dca(ss, cpu, tag);
1202                ss->cpu = cpu;
1203        }
1204        put_cpu();
1205}
1206
1207static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1208{
1209        int err, i;
1210        struct pci_dev *pdev = mgp->pdev;
1211
1212        if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1213                return;
1214        if (!myri10ge_dca) {
1215                dev_err(&pdev->dev, "dca disabled by administrator\n");
1216                return;
1217        }
1218        err = dca_add_requester(&pdev->dev);
1219        if (err) {
1220                if (err != -ENODEV)
1221                        dev_err(&pdev->dev,
1222                                "dca_add_requester() failed, err=%d\n", err);
1223                return;
1224        }
1225        mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
1226        mgp->dca_enabled = 1;
1227        for (i = 0; i < mgp->num_slices; i++) {
1228                mgp->ss[i].cpu = -1;
1229                mgp->ss[i].cached_dca_tag = -1;
1230                myri10ge_update_dca(&mgp->ss[i]);
1231        }
1232}
1233
1234static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1235{
1236        struct pci_dev *pdev = mgp->pdev;
1237
1238        if (!mgp->dca_enabled)
1239                return;
1240        mgp->dca_enabled = 0;
1241        if (mgp->relaxed_order)
1242                myri10ge_toggle_relaxed(pdev, 1);
1243        dca_remove_requester(&pdev->dev);
1244}
1245
1246static int myri10ge_notify_dca_device(struct device *dev, void *data)
1247{
1248        struct myri10ge_priv *mgp;
1249        unsigned long event;
1250
1251        mgp = dev_get_drvdata(dev);
1252        event = *(unsigned long *)data;
1253
1254        if (event == DCA_PROVIDER_ADD)
1255                myri10ge_setup_dca(mgp);
1256        else if (event == DCA_PROVIDER_REMOVE)
1257                myri10ge_teardown_dca(mgp);
1258        return 0;
1259}
1260#endif                          /* CONFIG_MYRI10GE_DCA */
1261
1262static inline void
1263myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1264                    struct mcp_kreq_ether_recv *src)
1265{
1266        __be32 low;
1267
1268        low = src->addr_low;
1269        src->addr_low = htonl(DMA_BIT_MASK(32));
1270        myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1271        mb();
1272        myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1273        mb();
1274        src->addr_low = low;
1275        put_be32(low, &dst->addr_low);
1276        mb();
1277}
1278
1279static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1280{
1281        struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1282
1283        if ((skb->protocol == htons(ETH_P_8021Q)) &&
1284            (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1285             vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1286                skb->csum = hw_csum;
1287                skb->ip_summed = CHECKSUM_COMPLETE;
1288        }
1289}
1290
1291static void
1292myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1293                        int bytes, int watchdog)
1294{
1295        struct page *page;
1296        dma_addr_t bus;
1297        int idx;
1298#if MYRI10GE_ALLOC_SIZE > 4096
1299        int end_offset;
1300#endif
1301
1302        if (unlikely(rx->watchdog_needed && !watchdog))
1303                return;
1304
1305        /* try to refill entire ring */
1306        while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1307                idx = rx->fill_cnt & rx->mask;
1308                if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1309                        /* we can use part of previous page */
1310                        get_page(rx->page);
1311                } else {
1312                        /* we need a new page */
1313                        page =
1314                            alloc_pages(GFP_ATOMIC | __GFP_COMP,
1315                                        MYRI10GE_ALLOC_ORDER);
1316                        if (unlikely(page == NULL)) {
1317                                if (rx->fill_cnt - rx->cnt < 16)
1318                                        rx->watchdog_needed = 1;
1319                                return;
1320                        }
1321
1322                        bus = pci_map_page(mgp->pdev, page, 0,
1323                                           MYRI10GE_ALLOC_SIZE,
1324                                           PCI_DMA_FROMDEVICE);
1325                        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
1326                                __free_pages(page, MYRI10GE_ALLOC_ORDER);
1327                                if (rx->fill_cnt - rx->cnt < 16)
1328                                        rx->watchdog_needed = 1;
1329                                return;
1330                        }
1331
1332                        rx->page = page;
1333                        rx->page_offset = 0;
1334                        rx->bus = bus;
1335
1336                }
1337                rx->info[idx].page = rx->page;
1338                rx->info[idx].page_offset = rx->page_offset;
1339                /* note that this is the address of the start of the
1340                 * page */
1341                dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1342                rx->shadow[idx].addr_low =
1343                    htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1344                rx->shadow[idx].addr_high =
1345                    htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1346
1347                /* start next packet on a cacheline boundary */
1348                rx->page_offset += SKB_DATA_ALIGN(bytes);
1349
1350#if MYRI10GE_ALLOC_SIZE > 4096
1351                /* don't cross a 4KB boundary */
1352                end_offset = rx->page_offset + bytes - 1;
1353                if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
1354                        rx->page_offset = end_offset & ~4095;
1355#endif
1356                rx->fill_cnt++;
1357
1358                /* copy 8 descriptors to the firmware at a time */
1359                if ((idx & 7) == 7) {
1360                        myri10ge_submit_8rx(&rx->lanai[idx - 7],
1361                                            &rx->shadow[idx - 7]);
1362                }
1363        }
1364}
1365
1366static inline void
1367myri10ge_unmap_rx_page(struct pci_dev *pdev,
1368                       struct myri10ge_rx_buffer_state *info, int bytes)
1369{
1370        /* unmap the recvd page if we're the only or last user of it */
1371        if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1372            (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1373                pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
1374                                      & ~(MYRI10GE_ALLOC_SIZE - 1)),
1375                               MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1376        }
1377}
1378
1379/*
1380 * GRO does not support acceleration of tagged vlan frames, and
1381 * this NIC does not support vlan tag offload, so we must pop
1382 * the tag ourselves to be able to achieve GRO performance that
1383 * is comparable to LRO.
1384 */
1385
1386static inline void
1387myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
1388{
1389        u8 *va;
1390        struct vlan_ethhdr *veh;
1391        struct skb_frag_struct *frag;
1392        __wsum vsum;
1393
1394        va = addr;
1395        va += MXGEFW_PAD;
1396        veh = (struct vlan_ethhdr *)va;
1397        if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) ==
1398            NETIF_F_HW_VLAN_CTAG_RX &&
1399            veh->h_vlan_proto == htons(ETH_P_8021Q)) {
1400                /* fixup csum if needed */
1401                if (skb->ip_summed == CHECKSUM_COMPLETE) {
1402                        vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
1403                        skb->csum = csum_sub(skb->csum, vsum);
1404                }
1405                /* pop tag */
1406                __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(veh->h_vlan_TCI));
1407                memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
1408                skb->len -= VLAN_HLEN;
1409                skb->data_len -= VLAN_HLEN;
1410                frag = skb_shinfo(skb)->frags;
1411                frag->page_offset += VLAN_HLEN;
1412                skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
1413        }
1414}
1415
1416#define MYRI10GE_HLEN 64 /* Bytes to copy from page to skb linear memory */
1417
1418static inline int
1419myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
1420{
1421        struct myri10ge_priv *mgp = ss->mgp;
1422        struct sk_buff *skb;
1423        struct skb_frag_struct *rx_frags;
1424        struct myri10ge_rx_buf *rx;
1425        int i, idx, remainder, bytes;
1426        struct pci_dev *pdev = mgp->pdev;
1427        struct net_device *dev = mgp->dev;
1428        u8 *va;
1429        bool polling;
1430
1431        if (len <= mgp->small_bytes) {
1432                rx = &ss->rx_small;
1433                bytes = mgp->small_bytes;
1434        } else {
1435                rx = &ss->rx_big;
1436                bytes = mgp->big_bytes;
1437        }
1438
1439        len += MXGEFW_PAD;
1440        idx = rx->cnt & rx->mask;
1441        va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1442        prefetch(va);
1443
1444        /* When busy polling in user context, allocate skb and copy headers to
1445         * skb's linear memory ourselves.  When not busy polling, use the napi
1446         * gro api.
1447         */
1448        polling = myri10ge_ss_busy_polling(ss);
1449        if (polling)
1450                skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
1451        else
1452                skb = napi_get_frags(&ss->napi);
1453        if (unlikely(skb == NULL)) {
1454                ss->stats.rx_dropped++;
1455                for (i = 0, remainder = len; remainder > 0; i++) {
1456                        myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1457                        put_page(rx->info[idx].page);
1458                        rx->cnt++;
1459                        idx = rx->cnt & rx->mask;
1460                        remainder -= MYRI10GE_ALLOC_SIZE;
1461                }
1462                return 0;
1463        }
1464        rx_frags = skb_shinfo(skb)->frags;
1465        /* Fill skb_frag_struct(s) with data from our receive */
1466        for (i = 0, remainder = len; remainder > 0; i++) {
1467                myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1468                skb_fill_page_desc(skb, i, rx->info[idx].page,
1469                                   rx->info[idx].page_offset,
1470                                   remainder < MYRI10GE_ALLOC_SIZE ?
1471                                   remainder : MYRI10GE_ALLOC_SIZE);
1472                rx->cnt++;
1473                idx = rx->cnt & rx->mask;
1474                remainder -= MYRI10GE_ALLOC_SIZE;
1475        }
1476
1477        /* remove padding */
1478        rx_frags[0].page_offset += MXGEFW_PAD;
1479        rx_frags[0].size -= MXGEFW_PAD;
1480        len -= MXGEFW_PAD;
1481
1482        skb->len = len;
1483        skb->data_len = len;
1484        skb->truesize += len;
1485        if (dev->features & NETIF_F_RXCSUM) {
1486                skb->ip_summed = CHECKSUM_COMPLETE;
1487                skb->csum = csum;
1488        }
1489        myri10ge_vlan_rx(mgp->dev, va, skb);
1490        skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1491
1492        if (polling) {
1493                int hlen;
1494
1495                /* myri10ge_vlan_rx might have moved the header, so compute
1496                 * length and address again.
1497                 */
1498                hlen = MYRI10GE_HLEN > skb->len ? skb->len : MYRI10GE_HLEN;
1499                va = page_address(skb_frag_page(&rx_frags[0])) +
1500                        rx_frags[0].page_offset;
1501                /* Copy header into the skb linear memory */
1502                skb_copy_to_linear_data(skb, va, hlen);
1503                rx_frags[0].page_offset += hlen;
1504                rx_frags[0].size -= hlen;
1505                skb->data_len -= hlen;
1506                skb->tail += hlen;
1507                skb->protocol = eth_type_trans(skb, dev);
1508                skb_mark_napi_id(skb, &ss->napi);
1509                netif_receive_skb(skb);
1510        }
1511        else
1512                napi_gro_frags(&ss->napi);
1513
1514        return 1;
1515}
1516
1517static inline void
1518myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1519{
1520        struct pci_dev *pdev = ss->mgp->pdev;
1521        struct myri10ge_tx_buf *tx = &ss->tx;
1522        struct netdev_queue *dev_queue;
1523        struct sk_buff *skb;
1524        int idx, len;
1525
1526        while (tx->pkt_done != mcp_index) {
1527                idx = tx->done & tx->mask;
1528                skb = tx->info[idx].skb;
1529
1530                /* Mark as free */
1531                tx->info[idx].skb = NULL;
1532                if (tx->info[idx].last) {
1533                        tx->pkt_done++;
1534                        tx->info[idx].last = 0;
1535                }
1536                tx->done++;
1537                len = dma_unmap_len(&tx->info[idx], len);
1538                dma_unmap_len_set(&tx->info[idx], len, 0);
1539                if (skb) {
1540                        ss->stats.tx_bytes += skb->len;
1541                        ss->stats.tx_packets++;
1542                        dev_kfree_skb_irq(skb);
1543                        if (len)
1544                                pci_unmap_single(pdev,
1545                                                 dma_unmap_addr(&tx->info[idx],
1546                                                                bus), len,
1547                                                 PCI_DMA_TODEVICE);
1548                } else {
1549                        if (len)
1550                                pci_unmap_page(pdev,
1551                                               dma_unmap_addr(&tx->info[idx],
1552                                                              bus), len,
1553                                               PCI_DMA_TODEVICE);
1554                }
1555        }
1556
1557        dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1558        /*
1559         * Make a minimal effort to prevent the NIC from polling an
1560         * idle tx queue.  If we can't get the lock we leave the queue
1561         * active. In this case, either a thread was about to start
1562         * using the queue anyway, or we lost a race and the NIC will
1563         * waste some of its resources polling an inactive queue for a
1564         * while.
1565         */
1566
1567        if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1568            __netif_tx_trylock(dev_queue)) {
1569                if (tx->req == tx->done) {
1570                        tx->queue_active = 0;
1571                        put_be32(htonl(1), tx->send_stop);
1572                        mb();
1573                        mmiowb();
1574                }
1575                __netif_tx_unlock(dev_queue);
1576        }
1577
1578        /* start the queue if we've stopped it */
1579        if (netif_tx_queue_stopped(dev_queue) &&
1580            tx->req - tx->done < (tx->mask >> 1) &&
1581            ss->mgp->running == MYRI10GE_ETH_RUNNING) {
1582                tx->wake_queue++;
1583                netif_tx_wake_queue(dev_queue);
1584        }
1585}
1586
1587static inline int
1588myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1589{
1590        struct myri10ge_rx_done *rx_done = &ss->rx_done;
1591        struct myri10ge_priv *mgp = ss->mgp;
1592        unsigned long rx_bytes = 0;
1593        unsigned long rx_packets = 0;
1594        unsigned long rx_ok;
1595        int idx = rx_done->idx;
1596        int cnt = rx_done->cnt;
1597        int work_done = 0;
1598        u16 length;
1599        __wsum checksum;
1600
1601        while (rx_done->entry[idx].length != 0 && work_done < budget) {
1602                length = ntohs(rx_done->entry[idx].length);
1603                rx_done->entry[idx].length = 0;
1604                checksum = csum_unfold(rx_done->entry[idx].checksum);
1605                rx_ok = myri10ge_rx_done(ss, length, checksum);
1606                rx_packets += rx_ok;
1607                rx_bytes += rx_ok * (unsigned long)length;
1608                cnt++;
1609                idx = cnt & (mgp->max_intr_slots - 1);
1610                work_done++;
1611        }
1612        rx_done->idx = idx;
1613        rx_done->cnt = cnt;
1614        ss->stats.rx_packets += rx_packets;
1615        ss->stats.rx_bytes += rx_bytes;
1616
1617        /* restock receive rings if needed */
1618        if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1619                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1620                                        mgp->small_bytes + MXGEFW_PAD, 0);
1621        if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1622                myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1623
1624        return work_done;
1625}
1626
1627static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1628{
1629        struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1630
1631        if (unlikely(stats->stats_updated)) {
1632                unsigned link_up = ntohl(stats->link_up);
1633                if (mgp->link_state != link_up) {
1634                        mgp->link_state = link_up;
1635
1636                        if (mgp->link_state == MXGEFW_LINK_UP) {
1637                                netif_info(mgp, link, mgp->dev, "link up\n");
1638                                netif_carrier_on(mgp->dev);
1639                                mgp->link_changes++;
1640                        } else {
1641                                netif_info(mgp, link, mgp->dev, "link %s\n",
1642                                           (link_up == MXGEFW_LINK_MYRINET ?
1643                                            "mismatch (Myrinet detected)" :
1644                                            "down"));
1645                                netif_carrier_off(mgp->dev);
1646                                mgp->link_changes++;
1647                        }
1648                }
1649                if (mgp->rdma_tags_available !=
1650                    ntohl(stats->rdma_tags_available)) {
1651                        mgp->rdma_tags_available =
1652                            ntohl(stats->rdma_tags_available);
1653                        netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
1654                                    mgp->rdma_tags_available);
1655                }
1656                mgp->down_cnt += stats->link_down;
1657                if (stats->link_down)
1658                        wake_up(&mgp->down_wq);
1659        }
1660}
1661
1662static int myri10ge_poll(struct napi_struct *napi, int budget)
1663{
1664        struct myri10ge_slice_state *ss =
1665            container_of(napi, struct myri10ge_slice_state, napi);
1666        int work_done;
1667
1668#ifdef CONFIG_MYRI10GE_DCA
1669        if (ss->mgp->dca_enabled)
1670                myri10ge_update_dca(ss);
1671#endif
1672        /* Try later if the busy_poll handler is running. */
1673        if (!myri10ge_ss_lock_napi(ss))
1674                return budget;
1675
1676        /* process as many rx events as NAPI will allow */
1677        work_done = myri10ge_clean_rx_done(ss, budget);
1678
1679        myri10ge_ss_unlock_napi(ss);
1680        if (work_done < budget) {
1681                napi_complete(napi);
1682                put_be32(htonl(3), ss->irq_claim);
1683        }
1684        return work_done;
1685}
1686
1687#ifdef CONFIG_NET_RX_BUSY_POLL
1688static int myri10ge_busy_poll(struct napi_struct *napi)
1689{
1690        struct myri10ge_slice_state *ss =
1691            container_of(napi, struct myri10ge_slice_state, napi);
1692        struct myri10ge_priv *mgp = ss->mgp;
1693        int work_done;
1694
1695        /* Poll only when the link is up */
1696        if (mgp->link_state != MXGEFW_LINK_UP)
1697                return LL_FLUSH_FAILED;
1698
1699        if (!myri10ge_ss_lock_poll(ss))
1700                return LL_FLUSH_BUSY;
1701
1702        /* Process a small number of packets */
1703        work_done = myri10ge_clean_rx_done(ss, 4);
1704        if (work_done)
1705                ss->busy_poll_cnt += work_done;
1706        else
1707                ss->busy_poll_miss++;
1708
1709        myri10ge_ss_unlock_poll(ss);
1710
1711        return work_done;
1712}
1713#endif /* CONFIG_NET_RX_BUSY_POLL */
1714
1715static irqreturn_t myri10ge_intr(int irq, void *arg)
1716{
1717        struct myri10ge_slice_state *ss = arg;
1718        struct myri10ge_priv *mgp = ss->mgp;
1719        struct mcp_irq_data *stats = ss->fw_stats;
1720        struct myri10ge_tx_buf *tx = &ss->tx;
1721        u32 send_done_count;
1722        int i;
1723
1724        /* an interrupt on a non-zero receive-only slice is implicitly
1725         * valid  since MSI-X irqs are not shared */
1726        if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1727                napi_schedule(&ss->napi);
1728                return IRQ_HANDLED;
1729        }
1730
1731        /* make sure it is our IRQ, and that the DMA has finished */
1732        if (unlikely(!stats->valid))
1733                return IRQ_NONE;
1734
1735        /* low bit indicates receives are present, so schedule
1736         * napi poll handler */
1737        if (stats->valid & 1)
1738                napi_schedule(&ss->napi);
1739
1740        if (!mgp->msi_enabled && !mgp->msix_enabled) {
1741                put_be32(0, mgp->irq_deassert);
1742                if (!myri10ge_deassert_wait)
1743                        stats->valid = 0;
1744                mb();
1745        } else
1746                stats->valid = 0;
1747
1748        /* Wait for IRQ line to go low, if using INTx */
1749        i = 0;
1750        while (1) {
1751                i++;
1752                /* check for transmit completes and receives */
1753                send_done_count = ntohl(stats->send_done_count);
1754                if (send_done_count != tx->pkt_done)
1755                        myri10ge_tx_done(ss, (int)send_done_count);
1756                if (unlikely(i > myri10ge_max_irq_loops)) {
1757                        netdev_warn(mgp->dev, "irq stuck?\n");
1758                        stats->valid = 0;
1759                        schedule_work(&mgp->watchdog_work);
1760                }
1761                if (likely(stats->valid == 0))
1762                        break;
1763                cpu_relax();
1764                barrier();
1765        }
1766
1767        /* Only slice 0 updates stats */
1768        if (ss == mgp->ss)
1769                myri10ge_check_statblock(mgp);
1770
1771        put_be32(htonl(3), ss->irq_claim + 1);
1772        return IRQ_HANDLED;
1773}
1774
1775static int
1776myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1777{
1778        struct myri10ge_priv *mgp = netdev_priv(netdev);
1779        char *ptr;
1780        int i;
1781
1782        cmd->autoneg = AUTONEG_DISABLE;
1783        ethtool_cmd_speed_set(cmd, SPEED_10000);
1784        cmd->duplex = DUPLEX_FULL;
1785
1786        /*
1787         * parse the product code to deterimine the interface type
1788         * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1789         * after the 3rd dash in the driver's cached copy of the
1790         * EEPROM's product code string.
1791         */
1792        ptr = mgp->product_code_string;
1793        if (ptr == NULL) {
1794                netdev_err(netdev, "Missing product code\n");
1795                return 0;
1796        }
1797        for (i = 0; i < 3; i++, ptr++) {
1798                ptr = strchr(ptr, '-');
1799                if (ptr == NULL) {
1800                        netdev_err(netdev, "Invalid product code %s\n",
1801                                   mgp->product_code_string);
1802                        return 0;
1803                }
1804        }
1805        if (*ptr == '2')
1806                ptr++;
1807        if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1808                /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1809                cmd->port = PORT_FIBRE;
1810                cmd->supported |= SUPPORTED_FIBRE;
1811                cmd->advertising |= ADVERTISED_FIBRE;
1812        } else {
1813                cmd->port = PORT_OTHER;
1814        }
1815        if (*ptr == 'R' || *ptr == 'S')
1816                cmd->transceiver = XCVR_EXTERNAL;
1817        else
1818                cmd->transceiver = XCVR_INTERNAL;
1819
1820        return 0;
1821}
1822
1823static void
1824myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1825{
1826        struct myri10ge_priv *mgp = netdev_priv(netdev);
1827
1828        strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1829        strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1830        strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1831        strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1832}
1833
1834static int
1835myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1836{
1837        struct myri10ge_priv *mgp = netdev_priv(netdev);
1838
1839        coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1840        return 0;
1841}
1842
1843static int
1844myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1845{
1846        struct myri10ge_priv *mgp = netdev_priv(netdev);
1847
1848        mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1849        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1850        return 0;
1851}
1852
1853static void
1854myri10ge_get_pauseparam(struct net_device *netdev,
1855                        struct ethtool_pauseparam *pause)
1856{
1857        struct myri10ge_priv *mgp = netdev_priv(netdev);
1858
1859        pause->autoneg = 0;
1860        pause->rx_pause = mgp->pause;
1861        pause->tx_pause = mgp->pause;
1862}
1863
1864static int
1865myri10ge_set_pauseparam(struct net_device *netdev,
1866                        struct ethtool_pauseparam *pause)
1867{
1868        struct myri10ge_priv *mgp = netdev_priv(netdev);
1869
1870        if (pause->tx_pause != mgp->pause)
1871                return myri10ge_change_pause(mgp, pause->tx_pause);
1872        if (pause->rx_pause != mgp->pause)
1873                return myri10ge_change_pause(mgp, pause->rx_pause);
1874        if (pause->autoneg != 0)
1875                return -EINVAL;
1876        return 0;
1877}
1878
1879static void
1880myri10ge_get_ringparam(struct net_device *netdev,
1881                       struct ethtool_ringparam *ring)
1882{
1883        struct myri10ge_priv *mgp = netdev_priv(netdev);
1884
1885        ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1886        ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1887        ring->rx_jumbo_max_pending = 0;
1888        ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1889        ring->rx_mini_pending = ring->rx_mini_max_pending;
1890        ring->rx_pending = ring->rx_max_pending;
1891        ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1892        ring->tx_pending = ring->tx_max_pending;
1893}
1894
1895static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1896        "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1897        "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1898        "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1899        "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1900        "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1901        "tx_heartbeat_errors", "tx_window_errors",
1902        /* device-specific stats */
1903        "tx_boundary", "irq", "MSI", "MSIX",
1904        "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1905        "serial_number", "watchdog_resets",
1906#ifdef CONFIG_MYRI10GE_DCA
1907        "dca_capable_firmware", "dca_device_present",
1908#endif
1909        "link_changes", "link_up", "dropped_link_overflow",
1910        "dropped_link_error_or_filtered",
1911        "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1912        "dropped_unicast_filtered", "dropped_multicast_filtered",
1913        "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1914        "dropped_no_big_buffer"
1915};
1916
1917static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1918        "----------- slice ---------",
1919        "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1920        "rx_small_cnt", "rx_big_cnt",
1921        "wake_queue", "stop_queue", "tx_linearized",
1922#ifdef CONFIG_NET_RX_BUSY_POLL
1923        "rx_lock_napi_yield", "rx_lock_poll_yield", "rx_busy_poll_miss",
1924        "rx_busy_poll_cnt",
1925#endif
1926};
1927
1928#define MYRI10GE_NET_STATS_LEN      21
1929#define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1930#define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1931
1932static void
1933myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1934{
1935        struct myri10ge_priv *mgp = netdev_priv(netdev);
1936        int i;
1937
1938        switch (stringset) {
1939        case ETH_SS_STATS:
1940                memcpy(data, *myri10ge_gstrings_main_stats,
1941                       sizeof(myri10ge_gstrings_main_stats));
1942                data += sizeof(myri10ge_gstrings_main_stats);
1943                for (i = 0; i < mgp->num_slices; i++) {
1944                        memcpy(data, *myri10ge_gstrings_slice_stats,
1945                               sizeof(myri10ge_gstrings_slice_stats));
1946                        data += sizeof(myri10ge_gstrings_slice_stats);
1947                }
1948                break;
1949        }
1950}
1951
1952static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1953{
1954        struct myri10ge_priv *mgp = netdev_priv(netdev);
1955
1956        switch (sset) {
1957        case ETH_SS_STATS:
1958                return MYRI10GE_MAIN_STATS_LEN +
1959                    mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1960        default:
1961                return -EOPNOTSUPP;
1962        }
1963}
1964
1965static void
1966myri10ge_get_ethtool_stats(struct net_device *netdev,
1967                           struct ethtool_stats *stats, u64 * data)
1968{
1969        struct myri10ge_priv *mgp = netdev_priv(netdev);
1970        struct myri10ge_slice_state *ss;
1971        struct rtnl_link_stats64 link_stats;
1972        int slice;
1973        int i;
1974
1975        /* force stats update */
1976        memset(&link_stats, 0, sizeof(link_stats));
1977        (void)myri10ge_get_stats(netdev, &link_stats);
1978        for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1979                data[i] = ((u64 *)&link_stats)[i];
1980
1981        data[i++] = (unsigned int)mgp->tx_boundary;
1982        data[i++] = (unsigned int)mgp->pdev->irq;
1983        data[i++] = (unsigned int)mgp->msi_enabled;
1984        data[i++] = (unsigned int)mgp->msix_enabled;
1985        data[i++] = (unsigned int)mgp->read_dma;
1986        data[i++] = (unsigned int)mgp->write_dma;
1987        data[i++] = (unsigned int)mgp->read_write_dma;
1988        data[i++] = (unsigned int)mgp->serial_number;
1989        data[i++] = (unsigned int)mgp->watchdog_resets;
1990#ifdef CONFIG_MYRI10GE_DCA
1991        data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1992        data[i++] = (unsigned int)(mgp->dca_enabled);
1993#endif
1994        data[i++] = (unsigned int)mgp->link_changes;
1995
1996        /* firmware stats are useful only in the first slice */
1997        ss = &mgp->ss[0];
1998        data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1999        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
2000        data[i++] =
2001            (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
2002        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
2003        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
2004        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
2005        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
2006        data[i++] =
2007            (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
2008        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
2009        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
2010        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
2011        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
2012
2013        for (slice = 0; slice < mgp->num_slices; slice++) {
2014                ss = &mgp->ss[slice];
2015                data[i++] = slice;
2016                data[i++] = (unsigned int)ss->tx.pkt_start;
2017                data[i++] = (unsigned int)ss->tx.pkt_done;
2018                data[i++] = (unsigned int)ss->tx.req;
2019                data[i++] = (unsigned int)ss->tx.done;
2020                data[i++] = (unsigned int)ss->rx_small.cnt;
2021                data[i++] = (unsigned int)ss->rx_big.cnt;
2022                data[i++] = (unsigned int)ss->tx.wake_queue;
2023                data[i++] = (unsigned int)ss->tx.stop_queue;
2024                data[i++] = (unsigned int)ss->tx.linearized;
2025#ifdef CONFIG_NET_RX_BUSY_POLL
2026                data[i++] = ss->lock_napi_yield;
2027                data[i++] = ss->lock_poll_yield;
2028                data[i++] = ss->busy_poll_miss;
2029                data[i++] = ss->busy_poll_cnt;
2030#endif
2031        }
2032}
2033
2034static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
2035{
2036        struct myri10ge_priv *mgp = netdev_priv(netdev);
2037        mgp->msg_enable = value;
2038}
2039
2040static u32 myri10ge_get_msglevel(struct net_device *netdev)
2041{
2042        struct myri10ge_priv *mgp = netdev_priv(netdev);
2043        return mgp->msg_enable;
2044}
2045
2046/*
2047 * Use a low-level command to change the LED behavior. Rather than
2048 * blinking (which is the normal case), when identify is used, the
2049 * yellow LED turns solid.
2050 */
2051static int myri10ge_led(struct myri10ge_priv *mgp, int on)
2052{
2053        struct mcp_gen_header *hdr;
2054        struct device *dev = &mgp->pdev->dev;
2055        size_t hdr_off, pattern_off, hdr_len;
2056        u32 pattern = 0xfffffffe;
2057
2058        /* find running firmware header */
2059        hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
2060        if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
2061                dev_err(dev, "Running firmware has bad header offset (%d)\n",
2062                        (int)hdr_off);
2063                return -EIO;
2064        }
2065        hdr_len = swab32(readl(mgp->sram + hdr_off +
2066                               offsetof(struct mcp_gen_header, header_length)));
2067        pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
2068        if (pattern_off >= (hdr_len + hdr_off)) {
2069                dev_info(dev, "Firmware does not support LED identification\n");
2070                return -EINVAL;
2071        }
2072        if (!on)
2073                pattern = swab32(readl(mgp->sram + pattern_off + 4));
2074        writel(swab32(pattern), mgp->sram + pattern_off);
2075        return 0;
2076}
2077
2078static int
2079myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
2080{
2081        struct myri10ge_priv *mgp = netdev_priv(netdev);
2082        int rc;
2083
2084        switch (state) {
2085        case ETHTOOL_ID_ACTIVE:
2086                rc = myri10ge_led(mgp, 1);
2087                break;
2088
2089        case ETHTOOL_ID_INACTIVE:
2090                rc =  myri10ge_led(mgp, 0);
2091                break;
2092
2093        default:
2094                rc = -EINVAL;
2095        }
2096
2097        return rc;
2098}
2099
2100static const struct ethtool_ops myri10ge_ethtool_ops = {
2101        .get_settings = myri10ge_get_settings,
2102        .get_drvinfo = myri10ge_get_drvinfo,
2103        .get_coalesce = myri10ge_get_coalesce,
2104        .set_coalesce = myri10ge_set_coalesce,
2105        .get_pauseparam = myri10ge_get_pauseparam,
2106        .set_pauseparam = myri10ge_set_pauseparam,
2107        .get_ringparam = myri10ge_get_ringparam,
2108        .get_link = ethtool_op_get_link,
2109        .get_strings = myri10ge_get_strings,
2110        .get_sset_count = myri10ge_get_sset_count,
2111        .get_ethtool_stats = myri10ge_get_ethtool_stats,
2112        .set_msglevel = myri10ge_set_msglevel,
2113        .get_msglevel = myri10ge_get_msglevel,
2114        .set_phys_id = myri10ge_phys_id,
2115};
2116
2117static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
2118{
2119        struct myri10ge_priv *mgp = ss->mgp;
2120        struct myri10ge_cmd cmd;
2121        struct net_device *dev = mgp->dev;
2122        int tx_ring_size, rx_ring_size;
2123        int tx_ring_entries, rx_ring_entries;
2124        int i, slice, status;
2125        size_t bytes;
2126
2127        /* get ring sizes */
2128        slice = ss - mgp->ss;
2129        cmd.data0 = slice;
2130        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
2131        tx_ring_size = cmd.data0;
2132        cmd.data0 = slice;
2133        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
2134        if (status != 0)
2135                return status;
2136        rx_ring_size = cmd.data0;
2137
2138        tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
2139        rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
2140        ss->tx.mask = tx_ring_entries - 1;
2141        ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
2142
2143        status = -ENOMEM;
2144
2145        /* allocate the host shadow rings */
2146
2147        bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
2148            * sizeof(*ss->tx.req_list);
2149        ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
2150        if (ss->tx.req_bytes == NULL)
2151                goto abort_with_nothing;
2152
2153        /* ensure req_list entries are aligned to 8 bytes */
2154        ss->tx.req_list = (struct mcp_kreq_ether_send *)
2155            ALIGN((unsigned long)ss->tx.req_bytes, 8);
2156        ss->tx.queue_active = 0;
2157
2158        bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
2159        ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
2160        if (ss->rx_small.shadow == NULL)
2161                goto abort_with_tx_req_bytes;
2162
2163        bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
2164        ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
2165        if (ss->rx_big.shadow == NULL)
2166                goto abort_with_rx_small_shadow;
2167
2168        /* allocate the host info rings */
2169
2170        bytes = tx_ring_entries * sizeof(*ss->tx.info);
2171        ss->tx.info = kzalloc(bytes, GFP_KERNEL);
2172        if (ss->tx.info == NULL)
2173                goto abort_with_rx_big_shadow;
2174
2175        bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
2176        ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
2177        if (ss->rx_small.info == NULL)
2178                goto abort_with_tx_info;
2179
2180        bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
2181        ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
2182        if (ss->rx_big.info == NULL)
2183                goto abort_with_rx_small_info;
2184
2185        /* Fill the receive rings */
2186        ss->rx_big.cnt = 0;
2187        ss->rx_small.cnt = 0;
2188        ss->rx_big.fill_cnt = 0;
2189        ss->rx_small.fill_cnt = 0;
2190        ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2191        ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2192        ss->rx_small.watchdog_needed = 0;
2193        ss->rx_big.watchdog_needed = 0;
2194        if (mgp->small_bytes == 0) {
2195                ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
2196        } else {
2197                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2198                                        mgp->small_bytes + MXGEFW_PAD, 0);
2199        }
2200
2201        if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2202                netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
2203                           slice, ss->rx_small.fill_cnt);
2204                goto abort_with_rx_small_ring;
2205        }
2206
2207        myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2208        if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2209                netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
2210                           slice, ss->rx_big.fill_cnt);
2211                goto abort_with_rx_big_ring;
2212        }
2213
2214        return 0;
2215
2216abort_with_rx_big_ring:
2217        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2218                int idx = i & ss->rx_big.mask;
2219                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2220                                       mgp->big_bytes);
2221                put_page(ss->rx_big.info[idx].page);
2222        }
2223
2224abort_with_rx_small_ring:
2225        if (mgp->small_bytes == 0)
2226                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2227        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2228                int idx = i & ss->rx_small.mask;
2229                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2230                                       mgp->small_bytes + MXGEFW_PAD);
2231                put_page(ss->rx_small.info[idx].page);
2232        }
2233
2234        kfree(ss->rx_big.info);
2235
2236abort_with_rx_small_info:
2237        kfree(ss->rx_small.info);
2238
2239abort_with_tx_info:
2240        kfree(ss->tx.info);
2241
2242abort_with_rx_big_shadow:
2243        kfree(ss->rx_big.shadow);
2244
2245abort_with_rx_small_shadow:
2246        kfree(ss->rx_small.shadow);
2247
2248abort_with_tx_req_bytes:
2249        kfree(ss->tx.req_bytes);
2250        ss->tx.req_bytes = NULL;
2251        ss->tx.req_list = NULL;
2252
2253abort_with_nothing:
2254        return status;
2255}
2256
2257static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2258{
2259        struct myri10ge_priv *mgp = ss->mgp;
2260        struct sk_buff *skb;
2261        struct myri10ge_tx_buf *tx;
2262        int i, len, idx;
2263
2264        /* If not allocated, skip it */
2265        if (ss->tx.req_list == NULL)
2266                return;
2267
2268        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2269                idx = i & ss->rx_big.mask;
2270                if (i == ss->rx_big.fill_cnt - 1)
2271                        ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2272                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2273                                       mgp->big_bytes);
2274                put_page(ss->rx_big.info[idx].page);
2275        }
2276
2277        if (mgp->small_bytes == 0)
2278                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2279        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2280                idx = i & ss->rx_small.mask;
2281                if (i == ss->rx_small.fill_cnt - 1)
2282                        ss->rx_small.info[idx].page_offset =
2283                            MYRI10GE_ALLOC_SIZE;
2284                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2285                                       mgp->small_bytes + MXGEFW_PAD);
2286                put_page(ss->rx_small.info[idx].page);
2287        }
2288        tx = &ss->tx;
2289        while (tx->done != tx->req) {
2290                idx = tx->done & tx->mask;
2291                skb = tx->info[idx].skb;
2292
2293                /* Mark as free */
2294                tx->info[idx].skb = NULL;
2295                tx->done++;
2296                len = dma_unmap_len(&tx->info[idx], len);
2297                dma_unmap_len_set(&tx->info[idx], len, 0);
2298                if (skb) {
2299                        ss->stats.tx_dropped++;
2300                        dev_kfree_skb_any(skb);
2301                        if (len)
2302                                pci_unmap_single(mgp->pdev,
2303                                                 dma_unmap_addr(&tx->info[idx],
2304                                                                bus), len,
2305                                                 PCI_DMA_TODEVICE);
2306                } else {
2307                        if (len)
2308                                pci_unmap_page(mgp->pdev,
2309                                               dma_unmap_addr(&tx->info[idx],
2310                                                              bus), len,
2311                                               PCI_DMA_TODEVICE);
2312                }
2313        }
2314        kfree(ss->rx_big.info);
2315
2316        kfree(ss->rx_small.info);
2317
2318        kfree(ss->tx.info);
2319
2320        kfree(ss->rx_big.shadow);
2321
2322        kfree(ss->rx_small.shadow);
2323
2324        kfree(ss->tx.req_bytes);
2325        ss->tx.req_bytes = NULL;
2326        ss->tx.req_list = NULL;
2327}
2328
2329static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2330{
2331        struct pci_dev *pdev = mgp->pdev;
2332        struct myri10ge_slice_state *ss;
2333        struct net_device *netdev = mgp->dev;
2334        int i;
2335        int status;
2336
2337        mgp->msi_enabled = 0;
2338        mgp->msix_enabled = 0;
2339        status = 0;
2340        if (myri10ge_msi) {
2341                if (mgp->num_slices > 1) {
2342                        status = pci_enable_msix_range(pdev, mgp->msix_vectors,
2343                                        mgp->num_slices, mgp->num_slices);
2344                        if (status < 0) {
2345                                dev_err(&pdev->dev,
2346                                        "Error %d setting up MSI-X\n", status);
2347                                return status;
2348                        }
2349                        mgp->msix_enabled = 1;
2350                }
2351                if (mgp->msix_enabled == 0) {
2352                        status = pci_enable_msi(pdev);
2353                        if (status != 0) {
2354                                dev_err(&pdev->dev,
2355                                        "Error %d setting up MSI; falling back to xPIC\n",
2356                                        status);
2357                        } else {
2358                                mgp->msi_enabled = 1;
2359                        }
2360                }
2361        }
2362        if (mgp->msix_enabled) {
2363                for (i = 0; i < mgp->num_slices; i++) {
2364                        ss = &mgp->ss[i];
2365                        snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2366                                 "%s:slice-%d", netdev->name, i);
2367                        status = request_irq(mgp->msix_vectors[i].vector,
2368                                             myri10ge_intr, 0, ss->irq_desc,
2369                                             ss);
2370                        if (status != 0) {
2371                                dev_err(&pdev->dev,
2372                                        "slice %d failed to allocate IRQ\n", i);
2373                                i--;
2374                                while (i >= 0) {
2375                                        free_irq(mgp->msix_vectors[i].vector,
2376                                                 &mgp->ss[i]);
2377                                        i--;
2378                                }
2379                                pci_disable_msix(pdev);
2380                                return status;
2381                        }
2382                }
2383        } else {
2384                status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2385                                     mgp->dev->name, &mgp->ss[0]);
2386                if (status != 0) {
2387                        dev_err(&pdev->dev, "failed to allocate IRQ\n");
2388                        if (mgp->msi_enabled)
2389                                pci_disable_msi(pdev);
2390                }
2391        }
2392        return status;
2393}
2394
2395static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2396{
2397        struct pci_dev *pdev = mgp->pdev;
2398        int i;
2399
2400        if (mgp->msix_enabled) {
2401                for (i = 0; i < mgp->num_slices; i++)
2402                        free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2403        } else {
2404                free_irq(pdev->irq, &mgp->ss[0]);
2405        }
2406        if (mgp->msi_enabled)
2407                pci_disable_msi(pdev);
2408        if (mgp->msix_enabled)
2409                pci_disable_msix(pdev);
2410}
2411
2412static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2413{
2414        struct myri10ge_cmd cmd;
2415        struct myri10ge_slice_state *ss;
2416        int status;
2417
2418        ss = &mgp->ss[slice];
2419        status = 0;
2420        if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2421                cmd.data0 = slice;
2422                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2423                                           &cmd, 0);
2424                ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2425                    (mgp->sram + cmd.data0);
2426        }
2427        cmd.data0 = slice;
2428        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2429                                    &cmd, 0);
2430        ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2431            (mgp->sram + cmd.data0);
2432
2433        cmd.data0 = slice;
2434        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2435        ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2436            (mgp->sram + cmd.data0);
2437
2438        ss->tx.send_go = (__iomem __be32 *)
2439            (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2440        ss->tx.send_stop = (__iomem __be32 *)
2441            (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2442        return status;
2443
2444}
2445
2446static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2447{
2448        struct myri10ge_cmd cmd;
2449        struct myri10ge_slice_state *ss;
2450        int status;
2451
2452        ss = &mgp->ss[slice];
2453        cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2454        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2455        cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2456        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2457        if (status == -ENOSYS) {
2458                dma_addr_t bus = ss->fw_stats_bus;
2459                if (slice != 0)
2460                        return -EINVAL;
2461                bus += offsetof(struct mcp_irq_data, send_done_count);
2462                cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2463                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2464                status = myri10ge_send_cmd(mgp,
2465                                           MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2466                                           &cmd, 0);
2467                /* Firmware cannot support multicast without STATS_DMA_V2 */
2468                mgp->fw_multicast_support = 0;
2469        } else {
2470                mgp->fw_multicast_support = 1;
2471        }
2472        return 0;
2473}
2474
2475static int myri10ge_open(struct net_device *dev)
2476{
2477        struct myri10ge_slice_state *ss;
2478        struct myri10ge_priv *mgp = netdev_priv(dev);
2479        struct myri10ge_cmd cmd;
2480        int i, status, big_pow2, slice;
2481        u8 __iomem *itable;
2482
2483        if (mgp->running != MYRI10GE_ETH_STOPPED)
2484                return -EBUSY;
2485
2486        mgp->running = MYRI10GE_ETH_STARTING;
2487        status = myri10ge_reset(mgp);
2488        if (status != 0) {
2489                netdev_err(dev, "failed reset\n");
2490                goto abort_with_nothing;
2491        }
2492
2493        if (mgp->num_slices > 1) {
2494                cmd.data0 = mgp->num_slices;
2495                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2496                if (mgp->dev->real_num_tx_queues > 1)
2497                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2498                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2499                                           &cmd, 0);
2500                if (status != 0) {
2501                        netdev_err(dev, "failed to set number of slices\n");
2502                        goto abort_with_nothing;
2503                }
2504                /* setup the indirection table */
2505                cmd.data0 = mgp->num_slices;
2506                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2507                                           &cmd, 0);
2508
2509                status |= myri10ge_send_cmd(mgp,
2510                                            MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2511                                            &cmd, 0);
2512                if (status != 0) {
2513                        netdev_err(dev, "failed to setup rss tables\n");
2514                        goto abort_with_nothing;
2515                }
2516
2517                /* just enable an identity mapping */
2518                itable = mgp->sram + cmd.data0;
2519                for (i = 0; i < mgp->num_slices; i++)
2520                        __raw_writeb(i, &itable[i]);
2521
2522                cmd.data0 = 1;
2523                cmd.data1 = myri10ge_rss_hash;
2524                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2525                                           &cmd, 0);
2526                if (status != 0) {
2527                        netdev_err(dev, "failed to enable slices\n");
2528                        goto abort_with_nothing;
2529                }
2530        }
2531
2532        status = myri10ge_request_irq(mgp);
2533        if (status != 0)
2534                goto abort_with_nothing;
2535
2536        /* decide what small buffer size to use.  For good TCP rx
2537         * performance, it is important to not receive 1514 byte
2538         * frames into jumbo buffers, as it confuses the socket buffer
2539         * accounting code, leading to drops and erratic performance.
2540         */
2541
2542        if (dev->mtu <= ETH_DATA_LEN)
2543                /* enough for a TCP header */
2544                mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2545                    ? (128 - MXGEFW_PAD)
2546                    : (SMP_CACHE_BYTES - MXGEFW_PAD);
2547        else
2548                /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2549                mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2550
2551        /* Override the small buffer size? */
2552        if (myri10ge_small_bytes >= 0)
2553                mgp->small_bytes = myri10ge_small_bytes;
2554
2555        /* Firmware needs the big buff size as a power of 2.  Lie and
2556         * tell him the buffer is larger, because we only use 1
2557         * buffer/pkt, and the mtu will prevent overruns.
2558         */
2559        big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2560        if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2561                while (!is_power_of_2(big_pow2))
2562                        big_pow2++;
2563                mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2564        } else {
2565                big_pow2 = MYRI10GE_ALLOC_SIZE;
2566                mgp->big_bytes = big_pow2;
2567        }
2568
2569        /* setup the per-slice data structures */
2570        for (slice = 0; slice < mgp->num_slices; slice++) {
2571                ss = &mgp->ss[slice];
2572
2573                status = myri10ge_get_txrx(mgp, slice);
2574                if (status != 0) {
2575                        netdev_err(dev, "failed to get ring sizes or locations\n");
2576                        goto abort_with_rings;
2577                }
2578                status = myri10ge_allocate_rings(ss);
2579                if (status != 0)
2580                        goto abort_with_rings;
2581
2582                /* only firmware which supports multiple TX queues
2583                 * supports setting up the tx stats on non-zero
2584                 * slices */
2585                if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2586                        status = myri10ge_set_stats(mgp, slice);
2587                if (status) {
2588                        netdev_err(dev, "Couldn't set stats DMA\n");
2589                        goto abort_with_rings;
2590                }
2591
2592                /* Initialize the slice spinlock and state used for polling */
2593                myri10ge_ss_init_lock(ss);
2594
2595                /* must happen prior to any irq */
2596                napi_enable(&(ss)->napi);
2597        }
2598
2599        /* now give firmware buffers sizes, and MTU */
2600        cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2601        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2602        cmd.data0 = mgp->small_bytes;
2603        status |=
2604            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2605        cmd.data0 = big_pow2;
2606        status |=
2607            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2608        if (status) {
2609                netdev_err(dev, "Couldn't set buffer sizes\n");
2610                goto abort_with_rings;
2611        }
2612
2613        /*
2614         * Set Linux style TSO mode; this is needed only on newer
2615         *  firmware versions.  Older versions default to Linux
2616         *  style TSO
2617         */
2618        cmd.data0 = 0;
2619        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2620        if (status && status != -ENOSYS) {
2621                netdev_err(dev, "Couldn't set TSO mode\n");
2622                goto abort_with_rings;
2623        }
2624
2625        mgp->link_state = ~0U;
2626        mgp->rdma_tags_available = 15;
2627
2628        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2629        if (status) {
2630                netdev_err(dev, "Couldn't bring up link\n");
2631                goto abort_with_rings;
2632        }
2633
2634        mgp->running = MYRI10GE_ETH_RUNNING;
2635        mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2636        add_timer(&mgp->watchdog_timer);
2637        netif_tx_wake_all_queues(dev);
2638
2639        return 0;
2640
2641abort_with_rings:
2642        while (slice) {
2643                slice--;
2644                napi_disable(&mgp->ss[slice].napi);
2645        }
2646        for (i = 0; i < mgp->num_slices; i++)
2647                myri10ge_free_rings(&mgp->ss[i]);
2648
2649        myri10ge_free_irq(mgp);
2650
2651abort_with_nothing:
2652        mgp->running = MYRI10GE_ETH_STOPPED;
2653        return -ENOMEM;
2654}
2655
2656static int myri10ge_close(struct net_device *dev)
2657{
2658        struct myri10ge_priv *mgp = netdev_priv(dev);
2659        struct myri10ge_cmd cmd;
2660        int status, old_down_cnt;
2661        int i;
2662
2663        if (mgp->running != MYRI10GE_ETH_RUNNING)
2664                return 0;
2665
2666        if (mgp->ss[0].tx.req_bytes == NULL)
2667                return 0;
2668
2669        del_timer_sync(&mgp->watchdog_timer);
2670        mgp->running = MYRI10GE_ETH_STOPPING;
2671        for (i = 0; i < mgp->num_slices; i++) {
2672                napi_disable(&mgp->ss[i].napi);
2673                local_bh_disable(); /* myri10ge_ss_lock_napi needs this */
2674                /* Lock the slice to prevent the busy_poll handler from
2675                 * accessing it.  Later when we bring the NIC up, myri10ge_open
2676                 * resets the slice including this lock.
2677                 */
2678                while (!myri10ge_ss_lock_napi(&mgp->ss[i])) {
2679                        pr_info("Slice %d locked\n", i);
2680                        mdelay(1);
2681                }
2682                local_bh_enable();
2683        }
2684        netif_carrier_off(dev);
2685
2686        netif_tx_stop_all_queues(dev);
2687        if (mgp->rebooted == 0) {
2688                old_down_cnt = mgp->down_cnt;
2689                mb();
2690                status =
2691                    myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2692                if (status)
2693                        netdev_err(dev, "Couldn't bring down link\n");
2694
2695                wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2696                                   HZ);
2697                if (old_down_cnt == mgp->down_cnt)
2698                        netdev_err(dev, "never got down irq\n");
2699        }
2700        netif_tx_disable(dev);
2701        myri10ge_free_irq(mgp);
2702        for (i = 0; i < mgp->num_slices; i++)
2703                myri10ge_free_rings(&mgp->ss[i]);
2704
2705        mgp->running = MYRI10GE_ETH_STOPPED;
2706        return 0;
2707}
2708
2709/* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2710 * backwards one at a time and handle ring wraps */
2711
2712static inline void
2713myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2714                              struct mcp_kreq_ether_send *src, int cnt)
2715{
2716        int idx, starting_slot;
2717        starting_slot = tx->req;
2718        while (cnt > 1) {
2719                cnt--;
2720                idx = (starting_slot + cnt) & tx->mask;
2721                myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2722                mb();
2723        }
2724}
2725
2726/*
2727 * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2728 * at most 32 bytes at a time, so as to avoid involving the software
2729 * pio handler in the nic.   We re-write the first segment's flags
2730 * to mark them valid only after writing the entire chain.
2731 */
2732
2733static inline void
2734myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2735                    int cnt)
2736{
2737        int idx, i;
2738        struct mcp_kreq_ether_send __iomem *dstp, *dst;
2739        struct mcp_kreq_ether_send *srcp;
2740        u8 last_flags;
2741
2742        idx = tx->req & tx->mask;
2743
2744        last_flags = src->flags;
2745        src->flags = 0;
2746        mb();
2747        dst = dstp = &tx->lanai[idx];
2748        srcp = src;
2749
2750        if ((idx + cnt) < tx->mask) {
2751                for (i = 0; i < (cnt - 1); i += 2) {
2752                        myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2753                        mb();   /* force write every 32 bytes */
2754                        srcp += 2;
2755                        dstp += 2;
2756                }
2757        } else {
2758                /* submit all but the first request, and ensure
2759                 * that it is submitted below */
2760                myri10ge_submit_req_backwards(tx, src, cnt);
2761                i = 0;
2762        }
2763        if (i < cnt) {
2764                /* submit the first request */
2765                myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2766                mb();           /* barrier before setting valid flag */
2767        }
2768
2769        /* re-write the last 32-bits with the valid flags */
2770        src->flags = last_flags;
2771        put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2772        tx->req += cnt;
2773        mb();
2774}
2775
2776static void myri10ge_unmap_tx_dma(struct myri10ge_priv *mgp,
2777                                  struct myri10ge_tx_buf *tx, int idx)
2778{
2779        unsigned int len;
2780        int last_idx;
2781
2782        /* Free any DMA resources we've alloced and clear out the skb slot */
2783        last_idx = (idx + 1) & tx->mask;
2784        idx = tx->req & tx->mask;
2785        do {
2786                len = dma_unmap_len(&tx->info[idx], len);
2787                if (len) {
2788                        if (tx->info[idx].skb != NULL)
2789                                pci_unmap_single(mgp->pdev,
2790                                                 dma_unmap_addr(&tx->info[idx],
2791                                                                bus), len,
2792                                                 PCI_DMA_TODEVICE);
2793                        else
2794                                pci_unmap_page(mgp->pdev,
2795                                               dma_unmap_addr(&tx->info[idx],
2796                                                              bus), len,
2797                                               PCI_DMA_TODEVICE);
2798                        dma_unmap_len_set(&tx->info[idx], len, 0);
2799                        tx->info[idx].skb = NULL;
2800                }
2801                idx = (idx + 1) & tx->mask;
2802        } while (idx != last_idx);
2803}
2804
2805/*
2806 * Transmit a packet.  We need to split the packet so that a single
2807 * segment does not cross myri10ge->tx_boundary, so this makes segment
2808 * counting tricky.  So rather than try to count segments up front, we
2809 * just give up if there are too few segments to hold a reasonably
2810 * fragmented packet currently available.  If we run
2811 * out of segments while preparing a packet for DMA, we just linearize
2812 * it and try again.
2813 */
2814
2815static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2816                                       struct net_device *dev)
2817{
2818        struct myri10ge_priv *mgp = netdev_priv(dev);
2819        struct myri10ge_slice_state *ss;
2820        struct mcp_kreq_ether_send *req;
2821        struct myri10ge_tx_buf *tx;
2822        struct skb_frag_struct *frag;
2823        struct netdev_queue *netdev_queue;
2824        dma_addr_t bus;
2825        u32 low;
2826        __be32 high_swapped;
2827        unsigned int len;
2828        int idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2829        u16 pseudo_hdr_offset, cksum_offset, queue;
2830        int cum_len, seglen, boundary, rdma_count;
2831        u8 flags, odd_flag;
2832
2833        queue = skb_get_queue_mapping(skb);
2834        ss = &mgp->ss[queue];
2835        netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2836        tx = &ss->tx;
2837
2838again:
2839        req = tx->req_list;
2840        avail = tx->mask - 1 - (tx->req - tx->done);
2841
2842        mss = 0;
2843        max_segments = MXGEFW_MAX_SEND_DESC;
2844
2845        if (skb_is_gso(skb)) {
2846                mss = skb_shinfo(skb)->gso_size;
2847                max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2848        }
2849
2850        if ((unlikely(avail < max_segments))) {
2851                /* we are out of transmit resources */
2852                tx->stop_queue++;
2853                netif_tx_stop_queue(netdev_queue);
2854                return NETDEV_TX_BUSY;
2855        }
2856
2857        /* Setup checksum offloading, if needed */
2858        cksum_offset = 0;
2859        pseudo_hdr_offset = 0;
2860        odd_flag = 0;
2861        flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2862        if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2863                cksum_offset = skb_checksum_start_offset(skb);
2864                pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2865                /* If the headers are excessively large, then we must
2866                 * fall back to a software checksum */
2867                if (unlikely(!mss && (cksum_offset > 255 ||
2868                                      pseudo_hdr_offset > 127))) {
2869                        if (skb_checksum_help(skb))
2870                                goto drop;
2871                        cksum_offset = 0;
2872                        pseudo_hdr_offset = 0;
2873                } else {
2874                        odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2875                        flags |= MXGEFW_FLAGS_CKSUM;
2876                }
2877        }
2878
2879        cum_len = 0;
2880
2881        if (mss) {              /* TSO */
2882                /* this removes any CKSUM flag from before */
2883                flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2884
2885                /* negative cum_len signifies to the
2886                 * send loop that we are still in the
2887                 * header portion of the TSO packet.
2888                 * TSO header can be at most 1KB long */
2889                cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2890
2891                /* for IPv6 TSO, the checksum offset stores the
2892                 * TCP header length, to save the firmware from
2893                 * the need to parse the headers */
2894                if (skb_is_gso_v6(skb)) {
2895                        cksum_offset = tcp_hdrlen(skb);
2896                        /* Can only handle headers <= max_tso6 long */
2897                        if (unlikely(-cum_len > mgp->max_tso6))
2898                                return myri10ge_sw_tso(skb, dev);
2899                }
2900                /* for TSO, pseudo_hdr_offset holds mss.
2901                 * The firmware figures out where to put
2902                 * the checksum by parsing the header. */
2903                pseudo_hdr_offset = mss;
2904        } else
2905                /* Mark small packets, and pad out tiny packets */
2906        if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2907                flags |= MXGEFW_FLAGS_SMALL;
2908
2909                /* pad frames to at least ETH_ZLEN bytes */
2910                if (eth_skb_pad(skb)) {
2911                        /* The packet is gone, so we must
2912                         * return 0 */
2913                        ss->stats.tx_dropped += 1;
2914                        return NETDEV_TX_OK;
2915                }
2916        }
2917
2918        /* map the skb for DMA */
2919        len = skb_headlen(skb);
2920        bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2921        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus)))
2922                goto drop;
2923
2924        idx = tx->req & tx->mask;
2925        tx->info[idx].skb = skb;
2926        dma_unmap_addr_set(&tx->info[idx], bus, bus);
2927        dma_unmap_len_set(&tx->info[idx], len, len);
2928
2929        frag_cnt = skb_shinfo(skb)->nr_frags;
2930        frag_idx = 0;
2931        count = 0;
2932        rdma_count = 0;
2933
2934        /* "rdma_count" is the number of RDMAs belonging to the
2935         * current packet BEFORE the current send request. For
2936         * non-TSO packets, this is equal to "count".
2937         * For TSO packets, rdma_count needs to be reset
2938         * to 0 after a segment cut.
2939         *
2940         * The rdma_count field of the send request is
2941         * the number of RDMAs of the packet starting at
2942         * that request. For TSO send requests with one ore more cuts
2943         * in the middle, this is the number of RDMAs starting
2944         * after the last cut in the request. All previous
2945         * segments before the last cut implicitly have 1 RDMA.
2946         *
2947         * Since the number of RDMAs is not known beforehand,
2948         * it must be filled-in retroactively - after each
2949         * segmentation cut or at the end of the entire packet.
2950         */
2951
2952        while (1) {
2953                /* Break the SKB or Fragment up into pieces which
2954                 * do not cross mgp->tx_boundary */
2955                low = MYRI10GE_LOWPART_TO_U32(bus);
2956                high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2957                while (len) {
2958                        u8 flags_next;
2959                        int cum_len_next;
2960
2961                        if (unlikely(count == max_segments))
2962                                goto abort_linearize;
2963
2964                        boundary =
2965                            (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2966                        seglen = boundary - low;
2967                        if (seglen > len)
2968                                seglen = len;
2969                        flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2970                        cum_len_next = cum_len + seglen;
2971                        if (mss) {      /* TSO */
2972                                (req - rdma_count)->rdma_count = rdma_count + 1;
2973
2974                                if (likely(cum_len >= 0)) {     /* payload */
2975                                        int next_is_first, chop;
2976
2977                                        chop = (cum_len_next > mss);
2978                                        cum_len_next = cum_len_next % mss;
2979                                        next_is_first = (cum_len_next == 0);
2980                                        flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2981                                        flags_next |= next_is_first *
2982                                            MXGEFW_FLAGS_FIRST;
2983                                        rdma_count |= -(chop | next_is_first);
2984                                        rdma_count += chop & ~next_is_first;
2985                                } else if (likely(cum_len_next >= 0)) { /* header ends */
2986                                        int small;
2987
2988                                        rdma_count = -1;
2989                                        cum_len_next = 0;
2990                                        seglen = -cum_len;
2991                                        small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2992                                        flags_next = MXGEFW_FLAGS_TSO_PLD |
2993                                            MXGEFW_FLAGS_FIRST |
2994                                            (small * MXGEFW_FLAGS_SMALL);
2995                                }
2996                        }
2997                        req->addr_high = high_swapped;
2998                        req->addr_low = htonl(low);
2999                        req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
3000                        req->pad = 0;   /* complete solid 16-byte block; does this matter? */
3001                        req->rdma_count = 1;
3002                        req->length = htons(seglen);
3003                        req->cksum_offset = cksum_offset;
3004                        req->flags = flags | ((cum_len & 1) * odd_flag);
3005
3006                        low += seglen;
3007                        len -= seglen;
3008                        cum_len = cum_len_next;
3009                        flags = flags_next;
3010                        req++;
3011                        count++;
3012                        rdma_count++;
3013                        if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
3014                                if (unlikely(cksum_offset > seglen))
3015                                        cksum_offset -= seglen;
3016                                else
3017                                        cksum_offset = 0;
3018                        }
3019                }
3020                if (frag_idx == frag_cnt)
3021                        break;
3022
3023                /* map next fragment for DMA */
3024                frag = &skb_shinfo(skb)->frags[frag_idx];
3025                frag_idx++;
3026                len = skb_frag_size(frag);
3027                bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
3028                                       DMA_TO_DEVICE);
3029                if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
3030                        myri10ge_unmap_tx_dma(mgp, tx, idx);
3031                        goto drop;
3032                }
3033                idx = (count + tx->req) & tx->mask;
3034                dma_unmap_addr_set(&tx->info[idx], bus, bus);
3035                dma_unmap_len_set(&tx->info[idx], len, len);
3036        }
3037
3038        (req - rdma_count)->rdma_count = rdma_count;
3039        if (mss)
3040                do {
3041                        req--;
3042                        req->flags |= MXGEFW_FLAGS_TSO_LAST;
3043                } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
3044                                         MXGEFW_FLAGS_FIRST)));
3045        idx = ((count - 1) + tx->req) & tx->mask;
3046        tx->info[idx].last = 1;
3047        myri10ge_submit_req(tx, tx->req_list, count);
3048        /* if using multiple tx queues, make sure NIC polls the
3049         * current slice */
3050        if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
3051                tx->queue_active = 1;
3052                put_be32(htonl(1), tx->send_go);
3053                mb();
3054                mmiowb();
3055        }
3056        tx->pkt_start++;
3057        if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
3058                tx->stop_queue++;
3059                netif_tx_stop_queue(netdev_queue);
3060        }
3061        return NETDEV_TX_OK;
3062
3063abort_linearize:
3064        myri10ge_unmap_tx_dma(mgp, tx, idx);
3065
3066        if (skb_is_gso(skb)) {
3067                netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
3068                goto drop;
3069        }
3070
3071        if (skb_linearize(skb))
3072                goto drop;
3073
3074        tx->linearized++;
3075        goto again;
3076
3077drop:
3078        dev_kfree_skb_any(skb);
3079        ss->stats.tx_dropped += 1;
3080        return NETDEV_TX_OK;
3081
3082}
3083
3084static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
3085                                         struct net_device *dev)
3086{
3087        struct sk_buff *segs, *curr;
3088        struct myri10ge_priv *mgp = netdev_priv(dev);
3089        struct myri10ge_slice_state *ss;
3090        netdev_tx_t status;
3091
3092        segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
3093        if (IS_ERR(segs))
3094                goto drop;
3095
3096        while (segs) {
3097                curr = segs;
3098                segs = segs->next;
3099                curr->next = NULL;
3100                status = myri10ge_xmit(curr, dev);
3101                if (status != 0) {
3102                        dev_kfree_skb_any(curr);
3103                        if (segs != NULL) {
3104                                curr = segs;
3105                                segs = segs->next;
3106                                curr->next = NULL;
3107                                dev_kfree_skb_any(segs);
3108                        }
3109                        goto drop;
3110                }
3111        }
3112        dev_kfree_skb_any(skb);
3113        return NETDEV_TX_OK;
3114
3115drop:
3116        ss = &mgp->ss[skb_get_queue_mapping(skb)];
3117        dev_kfree_skb_any(skb);
3118        ss->stats.tx_dropped += 1;
3119        return NETDEV_TX_OK;
3120}
3121
3122static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
3123                                                    struct rtnl_link_stats64 *stats)
3124{
3125        const struct myri10ge_priv *mgp = netdev_priv(dev);
3126        const struct myri10ge_slice_netstats *slice_stats;
3127        int i;
3128
3129        for (i = 0; i < mgp->num_slices; i++) {
3130                slice_stats = &mgp->ss[i].stats;
3131                stats->rx_packets += slice_stats->rx_packets;
3132                stats->tx_packets += slice_stats->tx_packets;
3133                stats->rx_bytes += slice_stats->rx_bytes;
3134                stats->tx_bytes += slice_stats->tx_bytes;
3135                stats->rx_dropped += slice_stats->rx_dropped;
3136                stats->tx_dropped += slice_stats->tx_dropped;
3137        }
3138        return stats;
3139}
3140
3141static void myri10ge_set_multicast_list(struct net_device *dev)
3142{
3143        struct myri10ge_priv *mgp = netdev_priv(dev);
3144        struct myri10ge_cmd cmd;
3145        struct netdev_hw_addr *ha;
3146        __be32 data[2] = { 0, 0 };
3147        int err;
3148
3149        /* can be called from atomic contexts,
3150         * pass 1 to force atomicity in myri10ge_send_cmd() */
3151        myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
3152
3153        /* This firmware is known to not support multicast */
3154        if (!mgp->fw_multicast_support)
3155                return;
3156
3157        /* Disable multicast filtering */
3158
3159        err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
3160        if (err != 0) {
3161                netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
3162                           err);
3163                goto abort;
3164        }
3165
3166        if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
3167                /* request to disable multicast filtering, so quit here */
3168                return;
3169        }
3170
3171        /* Flush the filters */
3172
3173        err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
3174                                &cmd, 1);
3175        if (err != 0) {
3176                netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
3177                           err);
3178                goto abort;
3179        }
3180
3181        /* Walk the multicast list, and add each address */
3182        netdev_for_each_mc_addr(ha, dev) {
3183                memcpy(data, &ha->addr, ETH_ALEN);
3184                cmd.data0 = ntohl(data[0]);
3185                cmd.data1 = ntohl(data[1]);
3186                err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
3187                                        &cmd, 1);
3188
3189                if (err != 0) {
3190                        netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
3191                                   err, ha->addr);
3192                        goto abort;
3193                }
3194        }
3195        /* Enable multicast filtering */
3196        err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3197        if (err != 0) {
3198                netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3199                           err);
3200                goto abort;
3201        }
3202
3203        return;
3204
3205abort:
3206        return;
3207}
3208
3209static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3210{
3211        struct sockaddr *sa = addr;
3212        struct myri10ge_priv *mgp = netdev_priv(dev);
3213        int status;
3214
3215        if (!is_valid_ether_addr(sa->sa_data))
3216                return -EADDRNOTAVAIL;
3217
3218        status = myri10ge_update_mac_address(mgp, sa->sa_data);
3219        if (status != 0) {
3220                netdev_err(dev, "changing mac address failed with %d\n",
3221                           status);
3222                return status;
3223        }
3224
3225        /* change the dev structure */
3226        memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
3227        return 0;
3228}
3229
3230static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3231{
3232        struct myri10ge_priv *mgp = netdev_priv(dev);
3233        int error = 0;
3234
3235        if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3236                netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
3237                return -EINVAL;
3238        }
3239        netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
3240        if (mgp->running) {
3241                /* if we change the mtu on an active device, we must
3242                 * reset the device so the firmware sees the change */
3243                myri10ge_close(dev);
3244                dev->mtu = new_mtu;
3245                myri10ge_open(dev);
3246        } else
3247                dev->mtu = new_mtu;
3248
3249        return error;
3250}
3251
3252/*
3253 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3254 * Only do it if the bridge is a root port since we don't want to disturb
3255 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3256 */
3257
3258static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3259{
3260        struct pci_dev *bridge = mgp->pdev->bus->self;
3261        struct device *dev = &mgp->pdev->dev;
3262        int cap;
3263        unsigned err_cap;
3264        int ret;
3265
3266        if (!myri10ge_ecrc_enable || !bridge)
3267                return;
3268
3269        /* check that the bridge is a root port */
3270        if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
3271                if (myri10ge_ecrc_enable > 1) {
3272                        struct pci_dev *prev_bridge, *old_bridge = bridge;
3273
3274                        /* Walk the hierarchy up to the root port
3275                         * where ECRC has to be enabled */
3276                        do {
3277                                prev_bridge = bridge;
3278                                bridge = bridge->bus->self;
3279                                if (!bridge || prev_bridge == bridge) {
3280                                        dev_err(dev,
3281                                                "Failed to find root port"
3282                                                " to force ECRC\n");
3283                                        return;
3284                                }
3285                        } while (pci_pcie_type(bridge) !=
3286                                 PCI_EXP_TYPE_ROOT_PORT);
3287
3288                        dev_info(dev,
3289                                 "Forcing ECRC on non-root port %s"
3290                                 " (enabling on root port %s)\n",
3291                                 pci_name(old_bridge), pci_name(bridge));
3292                } else {
3293                        dev_err(dev,
3294                                "Not enabling ECRC on non-root port %s\n",
3295                                pci_name(bridge));
3296                        return;
3297                }
3298        }
3299
3300        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3301        if (!cap)
3302                return;
3303
3304        ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3305        if (ret) {
3306                dev_err(dev, "failed reading ext-conf-space of %s\n",
3307                        pci_name(bridge));
3308                dev_err(dev, "\t pci=nommconf in use? "
3309                        "or buggy/incomplete/absent ACPI MCFG attr?\n");
3310                return;
3311        }
3312        if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3313                return;
3314
3315        err_cap |= PCI_ERR_CAP_ECRC_GENE;
3316        pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3317        dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3318}
3319
3320/*
3321 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3322 * when the PCI-E Completion packets are aligned on an 8-byte
3323 * boundary.  Some PCI-E chip sets always align Completion packets; on
3324 * the ones that do not, the alignment can be enforced by enabling
3325 * ECRC generation (if supported).
3326 *
3327 * When PCI-E Completion packets are not aligned, it is actually more
3328 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3329 *
3330 * If the driver can neither enable ECRC nor verify that it has
3331 * already been enabled, then it must use a firmware image which works
3332 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3333 * should also ensure that it never gives the device a Read-DMA which is
3334 * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3335 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3336 * firmware image, and set tx_boundary to 4KB.
3337 */
3338
3339static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3340{
3341        struct pci_dev *pdev = mgp->pdev;
3342        struct device *dev = &pdev->dev;
3343        int status;
3344
3345        mgp->tx_boundary = 4096;
3346        /*
3347         * Verify the max read request size was set to 4KB
3348         * before trying the test with 4KB.
3349         */
3350        status = pcie_get_readrq(pdev);
3351        if (status < 0) {
3352                dev_err(dev, "Couldn't read max read req size: %d\n", status);
3353                goto abort;
3354        }
3355        if (status != 4096) {
3356                dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3357                mgp->tx_boundary = 2048;
3358        }
3359        /*
3360         * load the optimized firmware (which assumes aligned PCIe
3361         * completions) in order to see if it works on this host.
3362         */
3363        set_fw_name(mgp, myri10ge_fw_aligned, false);
3364        status = myri10ge_load_firmware(mgp, 1);
3365        if (status != 0) {
3366                goto abort;
3367        }
3368
3369        /*
3370         * Enable ECRC if possible
3371         */
3372        myri10ge_enable_ecrc(mgp);
3373
3374        /*
3375         * Run a DMA test which watches for unaligned completions and
3376         * aborts on the first one seen.
3377         */
3378
3379        status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3380        if (status == 0)
3381                return;         /* keep the aligned firmware */
3382
3383        if (status != -E2BIG)
3384                dev_warn(dev, "DMA test failed: %d\n", status);
3385        if (status == -ENOSYS)
3386                dev_warn(dev, "Falling back to ethp! "
3387                         "Please install up to date fw\n");
3388abort:
3389        /* fall back to using the unaligned firmware */
3390        mgp->tx_boundary = 2048;
3391        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3392}
3393
3394static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3395{
3396        int overridden = 0;
3397
3398        if (myri10ge_force_firmware == 0) {
3399                int link_width;
3400                u16 lnk;
3401
3402                pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
3403                link_width = (lnk >> 4) & 0x3f;
3404
3405                /* Check to see if Link is less than 8 or if the
3406                 * upstream bridge is known to provide aligned
3407                 * completions */
3408                if (link_width < 8) {
3409                        dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3410                                 link_width);
3411                        mgp->tx_boundary = 4096;
3412                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3413                } else {
3414                        myri10ge_firmware_probe(mgp);
3415                }
3416        } else {
3417                if (myri10ge_force_firmware == 1) {
3418                        dev_info(&mgp->pdev->dev,
3419                                 "Assuming aligned completions (forced)\n");
3420                        mgp->tx_boundary = 4096;
3421                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3422                } else {
3423                        dev_info(&mgp->pdev->dev,
3424                                 "Assuming unaligned completions (forced)\n");
3425                        mgp->tx_boundary = 2048;
3426                        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3427                }
3428        }
3429
3430        kernel_param_lock(THIS_MODULE);
3431        if (myri10ge_fw_name != NULL) {
3432                char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
3433                if (fw_name) {
3434                        overridden = 1;
3435                        set_fw_name(mgp, fw_name, true);
3436                }
3437        }
3438        kernel_param_unlock(THIS_MODULE);
3439
3440        if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3441            myri10ge_fw_names[mgp->board_number] != NULL &&
3442            strlen(myri10ge_fw_names[mgp->board_number])) {
3443                set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
3444                overridden = 1;
3445        }
3446        if (overridden)
3447                dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3448                         mgp->fw_name);
3449}
3450
3451static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
3452{
3453        struct pci_dev *bridge = pdev->bus->self;
3454        int cap;
3455        u32 mask;
3456
3457        if (bridge == NULL)
3458                return;
3459
3460        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3461        if (cap) {
3462                /* a sram parity error can cause a surprise link
3463                 * down; since we expect and can recover from sram
3464                 * parity errors, mask surprise link down events */
3465                pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
3466                mask |= 0x20;
3467                pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
3468        }
3469}
3470
3471#ifdef CONFIG_PM
3472static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3473{
3474        struct myri10ge_priv *mgp;
3475        struct net_device *netdev;
3476
3477        mgp = pci_get_drvdata(pdev);
3478        if (mgp == NULL)
3479                return -EINVAL;
3480        netdev = mgp->dev;
3481
3482        netif_device_detach(netdev);
3483        if (netif_running(netdev)) {
3484                netdev_info(netdev, "closing\n");
3485                rtnl_lock();
3486                myri10ge_close(netdev);
3487                rtnl_unlock();
3488        }
3489        myri10ge_dummy_rdma(mgp, 0);
3490        pci_save_state(pdev);
3491        pci_disable_device(pdev);
3492
3493        return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3494}
3495
3496static int myri10ge_resume(struct pci_dev *pdev)
3497{
3498        struct myri10ge_priv *mgp;
3499        struct net_device *netdev;
3500        int status;
3501        u16 vendor;
3502
3503        mgp = pci_get_drvdata(pdev);
3504        if (mgp == NULL)
3505                return -EINVAL;
3506        netdev = mgp->dev;
3507        pci_set_power_state(pdev, PCI_D0);      /* zeros conf space as a side effect */
3508        msleep(5);              /* give card time to respond */
3509        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3510        if (vendor == 0xffff) {
3511                netdev_err(mgp->dev, "device disappeared!\n");
3512                return -EIO;
3513        }
3514
3515        pci_restore_state(pdev);
3516
3517        status = pci_enable_device(pdev);
3518        if (status) {
3519                dev_err(&pdev->dev, "failed to enable device\n");
3520                return status;
3521        }
3522
3523        pci_set_master(pdev);
3524
3525        myri10ge_reset(mgp);
3526        myri10ge_dummy_rdma(mgp, 1);
3527
3528        /* Save configuration space to be restored if the
3529         * nic resets due to a parity error */
3530        pci_save_state(pdev);
3531
3532        if (netif_running(netdev)) {
3533                rtnl_lock();
3534                status = myri10ge_open(netdev);
3535                rtnl_unlock();
3536                if (status != 0)
3537                        goto abort_with_enabled;
3538
3539        }
3540        netif_device_attach(netdev);
3541
3542        return 0;
3543
3544abort_with_enabled:
3545        pci_disable_device(pdev);
3546        return -EIO;
3547
3548}
3549#endif                          /* CONFIG_PM */
3550
3551static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3552{
3553        struct pci_dev *pdev = mgp->pdev;
3554        int vs = mgp->vendor_specific_offset;
3555        u32 reboot;
3556
3557        /*enter read32 mode */
3558        pci_write_config_byte(pdev, vs + 0x10, 0x3);
3559
3560        /*read REBOOT_STATUS (0xfffffff0) */
3561        pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3562        pci_read_config_dword(pdev, vs + 0x14, &reboot);
3563        return reboot;
3564}
3565
3566static void
3567myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
3568                     int *busy_slice_cnt, u32 rx_pause_cnt)
3569{
3570        struct myri10ge_priv *mgp = ss->mgp;
3571        int slice = ss - mgp->ss;
3572
3573        if (ss->tx.req != ss->tx.done &&
3574            ss->tx.done == ss->watchdog_tx_done &&
3575            ss->watchdog_tx_req != ss->watchdog_tx_done) {
3576                /* nic seems like it might be stuck.. */
3577                if (rx_pause_cnt != mgp->watchdog_pause) {
3578                        if (net_ratelimit())
3579                                netdev_warn(mgp->dev, "slice %d: TX paused, "
3580                                            "check link partner\n", slice);
3581                } else {
3582                        netdev_warn(mgp->dev,
3583                                    "slice %d: TX stuck %d %d %d %d %d %d\n",
3584                                    slice, ss->tx.queue_active, ss->tx.req,
3585                                    ss->tx.done, ss->tx.pkt_start,
3586                                    ss->tx.pkt_done,
3587                                    (int)ntohl(mgp->ss[slice].fw_stats->
3588                                               send_done_count));
3589                        *reset_needed = 1;
3590                        ss->stuck = 1;
3591                }
3592        }
3593        if (ss->watchdog_tx_done != ss->tx.done ||
3594            ss->watchdog_rx_done != ss->rx_done.cnt) {
3595                *busy_slice_cnt += 1;
3596        }
3597        ss->watchdog_tx_done = ss->tx.done;
3598        ss->watchdog_tx_req = ss->tx.req;
3599        ss->watchdog_rx_done = ss->rx_done.cnt;
3600}
3601
3602/*
3603 * This watchdog is used to check whether the board has suffered
3604 * from a parity error and needs to be recovered.
3605 */
3606static void myri10ge_watchdog(struct work_struct *work)
3607{
3608        struct myri10ge_priv *mgp =
3609            container_of(work, struct myri10ge_priv, watchdog_work);
3610        struct myri10ge_slice_state *ss;
3611        u32 reboot, rx_pause_cnt;
3612        int status, rebooted;
3613        int i;
3614        int reset_needed = 0;
3615        int busy_slice_cnt = 0;
3616        u16 cmd, vendor;
3617
3618        mgp->watchdog_resets++;
3619        pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3620        rebooted = 0;
3621        if ((cmd & PCI_COMMAND_MASTER) == 0) {
3622                /* Bus master DMA disabled?  Check to see
3623                 * if the card rebooted due to a parity error
3624                 * For now, just report it */
3625                reboot = myri10ge_read_reboot(mgp);
3626                netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
3627                           reboot, myri10ge_reset_recover ? "" : " not");
3628                if (myri10ge_reset_recover == 0)
3629                        return;
3630                rtnl_lock();
3631                mgp->rebooted = 1;
3632                rebooted = 1;
3633                myri10ge_close(mgp->dev);
3634                myri10ge_reset_recover--;
3635                mgp->rebooted = 0;
3636                /*
3637                 * A rebooted nic will come back with config space as
3638                 * it was after power was applied to PCIe bus.
3639                 * Attempt to restore config space which was saved
3640                 * when the driver was loaded, or the last time the
3641                 * nic was resumed from power saving mode.
3642                 */
3643                pci_restore_state(mgp->pdev);
3644
3645                /* save state again for accounting reasons */
3646                pci_save_state(mgp->pdev);
3647
3648        } else {
3649                /* if we get back -1's from our slot, perhaps somebody
3650                 * powered off our card.  Don't try to reset it in
3651                 * this case */
3652                if (cmd == 0xffff) {
3653                        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3654                        if (vendor == 0xffff) {
3655                                netdev_err(mgp->dev, "device disappeared!\n");
3656                                return;
3657                        }
3658                }
3659                /* Perhaps it is a software error. See if stuck slice
3660                 * has recovered, reset if not */
3661                rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3662                for (i = 0; i < mgp->num_slices; i++) {
3663                        ss = mgp->ss;
3664                        if (ss->stuck) {
3665                                myri10ge_check_slice(ss, &reset_needed,
3666                                                     &busy_slice_cnt,
3667                                                     rx_pause_cnt);
3668                                ss->stuck = 0;
3669                        }
3670                }
3671                if (!reset_needed) {
3672                        netdev_dbg(mgp->dev, "not resetting\n");
3673                        return;
3674                }
3675
3676                netdev_err(mgp->dev, "device timeout, resetting\n");
3677        }
3678
3679        if (!rebooted) {
3680                rtnl_lock();
3681                myri10ge_close(mgp->dev);
3682        }
3683        status = myri10ge_load_firmware(mgp, 1);
3684        if (status != 0)
3685                netdev_err(mgp->dev, "failed to load firmware\n");
3686        else
3687                myri10ge_open(mgp->dev);
3688        rtnl_unlock();
3689}
3690
3691/*
3692 * We use our own timer routine rather than relying upon
3693 * netdev->tx_timeout because we have a very large hardware transmit
3694 * queue.  Due to the large queue, the netdev->tx_timeout function
3695 * cannot detect a NIC with a parity error in a timely fashion if the
3696 * NIC is lightly loaded.
3697 */
3698static void myri10ge_watchdog_timer(unsigned long arg)
3699{
3700        struct myri10ge_priv *mgp;
3701        struct myri10ge_slice_state *ss;
3702        int i, reset_needed, busy_slice_cnt;
3703        u32 rx_pause_cnt;
3704        u16 cmd;
3705
3706        mgp = (struct myri10ge_priv *)arg;
3707
3708        rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3709        busy_slice_cnt = 0;
3710        for (i = 0, reset_needed = 0;
3711             i < mgp->num_slices && reset_needed == 0; ++i) {
3712
3713                ss = &mgp->ss[i];
3714                if (ss->rx_small.watchdog_needed) {
3715                        myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3716                                                mgp->small_bytes + MXGEFW_PAD,
3717                                                1);
3718                        if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3719                            myri10ge_fill_thresh)
3720                                ss->rx_small.watchdog_needed = 0;
3721                }
3722                if (ss->rx_big.watchdog_needed) {
3723                        myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3724                                                mgp->big_bytes, 1);
3725                        if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3726                            myri10ge_fill_thresh)
3727                                ss->rx_big.watchdog_needed = 0;
3728                }
3729                myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
3730                                     rx_pause_cnt);
3731        }
3732        /* if we've sent or received no traffic, poll the NIC to
3733         * ensure it is still there.  Otherwise, we risk not noticing
3734         * an error in a timely fashion */
3735        if (busy_slice_cnt == 0) {
3736                pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3737                if ((cmd & PCI_COMMAND_MASTER) == 0) {
3738                        reset_needed = 1;
3739                }
3740        }
3741        mgp->watchdog_pause = rx_pause_cnt;
3742
3743        if (reset_needed) {
3744                schedule_work(&mgp->watchdog_work);
3745        } else {
3746                /* rearm timer */
3747                mod_timer(&mgp->watchdog_timer,
3748                          jiffies + myri10ge_watchdog_timeout * HZ);
3749        }
3750}
3751
3752static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3753{
3754        struct myri10ge_slice_state *ss;
3755        struct pci_dev *pdev = mgp->pdev;
3756        size_t bytes;
3757        int i;
3758
3759        if (mgp->ss == NULL)
3760                return;
3761
3762        for (i = 0; i < mgp->num_slices; i++) {
3763                ss = &mgp->ss[i];
3764                if (ss->rx_done.entry != NULL) {
3765                        bytes = mgp->max_intr_slots *
3766                            sizeof(*ss->rx_done.entry);
3767                        dma_free_coherent(&pdev->dev, bytes,
3768                                          ss->rx_done.entry, ss->rx_done.bus);
3769                        ss->rx_done.entry = NULL;
3770                }
3771                if (ss->fw_stats != NULL) {
3772                        bytes = sizeof(*ss->fw_stats);
3773                        dma_free_coherent(&pdev->dev, bytes,
3774                                          ss->fw_stats, ss->fw_stats_bus);
3775                        ss->fw_stats = NULL;
3776                }
3777                napi_hash_del(&ss->napi);
3778                netif_napi_del(&ss->napi);
3779        }
3780        /* Wait till napi structs are no longer used, and then free ss. */
3781        synchronize_rcu();
3782        kfree(mgp->ss);
3783        mgp->ss = NULL;
3784}
3785
3786static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3787{
3788        struct myri10ge_slice_state *ss;
3789        struct pci_dev *pdev = mgp->pdev;
3790        size_t bytes;
3791        int i;
3792
3793        bytes = sizeof(*mgp->ss) * mgp->num_slices;
3794        mgp->ss = kzalloc(bytes, GFP_KERNEL);
3795        if (mgp->ss == NULL) {
3796                return -ENOMEM;
3797        }
3798
3799        for (i = 0; i < mgp->num_slices; i++) {
3800                ss = &mgp->ss[i];
3801                bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3802                ss->rx_done.entry = dma_zalloc_coherent(&pdev->dev, bytes,
3803                                                        &ss->rx_done.bus,
3804                                                        GFP_KERNEL);
3805                if (ss->rx_done.entry == NULL)
3806                        goto abort;
3807                bytes = sizeof(*ss->fw_stats);
3808                ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3809                                                  &ss->fw_stats_bus,
3810                                                  GFP_KERNEL);
3811                if (ss->fw_stats == NULL)
3812                        goto abort;
3813                ss->mgp = mgp;
3814                ss->dev = mgp->dev;
3815                netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3816                               myri10ge_napi_weight);
3817        }
3818        return 0;
3819abort:
3820        myri10ge_free_slices(mgp);
3821        return -ENOMEM;
3822}
3823
3824/*
3825 * This function determines the number of slices supported.
3826 * The number slices is the minimum of the number of CPUS,
3827 * the number of MSI-X irqs supported, the number of slices
3828 * supported by the firmware
3829 */
3830static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3831{
3832        struct myri10ge_cmd cmd;
3833        struct pci_dev *pdev = mgp->pdev;
3834        char *old_fw;
3835        bool old_allocated;
3836        int i, status, ncpus;
3837
3838        mgp->num_slices = 1;
3839        ncpus = netif_get_num_default_rss_queues();
3840
3841        if (myri10ge_max_slices == 1 || !pdev->msix_cap ||
3842            (myri10ge_max_slices == -1 && ncpus < 2))
3843                return;
3844
3845        /* try to load the slice aware rss firmware */
3846        old_fw = mgp->fw_name;
3847        old_allocated = mgp->fw_name_allocated;
3848        /* don't free old_fw if we override it. */
3849        mgp->fw_name_allocated = false;
3850
3851        if (myri10ge_fw_name != NULL) {
3852                dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3853                         myri10ge_fw_name);
3854                set_fw_name(mgp, myri10ge_fw_name, false);
3855        } else if (old_fw == myri10ge_fw_aligned)
3856                set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
3857        else
3858                set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
3859        status = myri10ge_load_firmware(mgp, 0);
3860        if (status != 0) {
3861                dev_info(&pdev->dev, "Rss firmware not found\n");
3862                if (old_allocated)
3863                        kfree(old_fw);
3864                return;
3865        }
3866
3867        /* hit the board with a reset to ensure it is alive */
3868        memset(&cmd, 0, sizeof(cmd));
3869        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3870        if (status != 0) {
3871                dev_err(&mgp->pdev->dev, "failed reset\n");
3872                goto abort_with_fw;
3873        }
3874
3875        mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3876
3877        /* tell it the size of the interrupt queues */
3878        cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3879        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3880        if (status != 0) {
3881                dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3882                goto abort_with_fw;
3883        }
3884
3885        /* ask the maximum number of slices it supports */
3886        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3887        if (status != 0)
3888                goto abort_with_fw;
3889        else
3890                mgp->num_slices = cmd.data0;
3891
3892        /* Only allow multiple slices if MSI-X is usable */
3893        if (!myri10ge_msi) {
3894                goto abort_with_fw;
3895        }
3896
3897        /* if the admin did not specify a limit to how many
3898         * slices we should use, cap it automatically to the
3899         * number of CPUs currently online */
3900        if (myri10ge_max_slices == -1)
3901                myri10ge_max_slices = ncpus;
3902
3903        if (mgp->num_slices > myri10ge_max_slices)
3904                mgp->num_slices = myri10ge_max_slices;
3905
3906        /* Now try to allocate as many MSI-X vectors as we have
3907         * slices. We give up on MSI-X if we can only get a single
3908         * vector. */
3909
3910        mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
3911                                    GFP_KERNEL);
3912        if (mgp->msix_vectors == NULL)
3913                goto no_msix;
3914        for (i = 0; i < mgp->num_slices; i++) {
3915                mgp->msix_vectors[i].entry = i;
3916        }
3917
3918        while (mgp->num_slices > 1) {
3919                mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
3920                if (mgp->num_slices == 1)
3921                        goto no_msix;
3922                status = pci_enable_msix_range(pdev,
3923                                               mgp->msix_vectors,
3924                                               mgp->num_slices,
3925                                               mgp->num_slices);
3926                if (status < 0)
3927                        goto no_msix;
3928
3929                pci_disable_msix(pdev);
3930
3931                if (status == mgp->num_slices) {
3932                        if (old_allocated)
3933                                kfree(old_fw);
3934                        return;
3935                } else {
3936                        mgp->num_slices = status;
3937                }
3938        }
3939
3940no_msix:
3941        if (mgp->msix_vectors != NULL) {
3942                kfree(mgp->msix_vectors);
3943                mgp->msix_vectors = NULL;
3944        }
3945
3946abort_with_fw:
3947        mgp->num_slices = 1;
3948        set_fw_name(mgp, old_fw, old_allocated);
3949        myri10ge_load_firmware(mgp, 0);
3950}
3951
3952static const struct net_device_ops myri10ge_netdev_ops = {
3953        .ndo_open               = myri10ge_open,
3954        .ndo_stop               = myri10ge_close,
3955        .ndo_start_xmit         = myri10ge_xmit,
3956        .ndo_get_stats64        = myri10ge_get_stats,
3957        .ndo_validate_addr      = eth_validate_addr,
3958        .ndo_change_mtu         = myri10ge_change_mtu,
3959        .ndo_set_rx_mode        = myri10ge_set_multicast_list,
3960        .ndo_set_mac_address    = myri10ge_set_mac_address,
3961#ifdef CONFIG_NET_RX_BUSY_POLL
3962        .ndo_busy_poll          = myri10ge_busy_poll,
3963#endif
3964};
3965
3966static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3967{
3968        struct net_device *netdev;
3969        struct myri10ge_priv *mgp;
3970        struct device *dev = &pdev->dev;
3971        int i;
3972        int status = -ENXIO;
3973        int dac_enabled;
3974        unsigned hdr_offset, ss_offset;
3975        static int board_number;
3976
3977        netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3978        if (netdev == NULL)
3979                return -ENOMEM;
3980
3981        SET_NETDEV_DEV(netdev, &pdev->dev);
3982
3983        mgp = netdev_priv(netdev);
3984        mgp->dev = netdev;
3985        mgp->pdev = pdev;
3986        mgp->pause = myri10ge_flow_control;
3987        mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3988        mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3989        mgp->board_number = board_number;
3990        init_waitqueue_head(&mgp->down_wq);
3991
3992        if (pci_enable_device(pdev)) {
3993                dev_err(&pdev->dev, "pci_enable_device call failed\n");
3994                status = -ENODEV;
3995                goto abort_with_netdev;
3996        }
3997
3998        /* Find the vendor-specific cap so we can check
3999         * the reboot register later on */
4000        mgp->vendor_specific_offset
4001            = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
4002
4003        /* Set our max read request to 4KB */
4004        status = pcie_set_readrq(pdev, 4096);
4005        if (status != 0) {
4006                dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
4007                        status);
4008                goto abort_with_enabled;
4009        }
4010
4011        myri10ge_mask_surprise_down(pdev);
4012        pci_set_master(pdev);
4013        dac_enabled = 1;
4014        status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
4015        if (status != 0) {
4016                dac_enabled = 0;
4017                dev_err(&pdev->dev,
4018                        "64-bit pci address mask was refused, "
4019                        "trying 32-bit\n");
4020                status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4021        }
4022        if (status != 0) {
4023                dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
4024                goto abort_with_enabled;
4025        }
4026        (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4027        mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
4028                                      &mgp->cmd_bus, GFP_KERNEL);
4029        if (!mgp->cmd) {
4030                status = -ENOMEM;
4031                goto abort_with_enabled;
4032        }
4033
4034        mgp->board_span = pci_resource_len(pdev, 0);
4035        mgp->iomem_base = pci_resource_start(pdev, 0);
4036        mgp->wc_cookie = arch_phys_wc_add(mgp->iomem_base, mgp->board_span);
4037        mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
4038        if (mgp->sram == NULL) {
4039                dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
4040                        mgp->board_span, mgp->iomem_base);
4041                status = -ENXIO;
4042                goto abort_with_mtrr;
4043        }
4044        hdr_offset =
4045            swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
4046        ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
4047        mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
4048        if (mgp->sram_size > mgp->board_span ||
4049            mgp->sram_size <= MYRI10GE_FW_OFFSET) {
4050                dev_err(&pdev->dev,
4051                        "invalid sram_size %dB or board span %ldB\n",
4052                        mgp->sram_size, mgp->board_span);
4053                goto abort_with_ioremap;
4054        }
4055        memcpy_fromio(mgp->eeprom_strings,
4056                      mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
4057        memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
4058        status = myri10ge_read_mac_addr(mgp);
4059        if (status)
4060                goto abort_with_ioremap;
4061
4062        for (i = 0; i < ETH_ALEN; i++)
4063                netdev->dev_addr[i] = mgp->mac_addr[i];
4064
4065        myri10ge_select_firmware(mgp);
4066
4067        status = myri10ge_load_firmware(mgp, 1);
4068        if (status != 0) {
4069                dev_err(&pdev->dev, "failed to load firmware\n");
4070                goto abort_with_ioremap;
4071        }
4072        myri10ge_probe_slices(mgp);
4073        status = myri10ge_alloc_slices(mgp);
4074        if (status != 0) {
4075                dev_err(&pdev->dev, "failed to alloc slice state\n");
4076                goto abort_with_firmware;
4077        }
4078        netif_set_real_num_tx_queues(netdev, mgp->num_slices);
4079        netif_set_real_num_rx_queues(netdev, mgp->num_slices);
4080        status = myri10ge_reset(mgp);
4081        if (status != 0) {
4082                dev_err(&pdev->dev, "failed reset\n");
4083                goto abort_with_slices;
4084        }
4085#ifdef CONFIG_MYRI10GE_DCA
4086        myri10ge_setup_dca(mgp);
4087#endif
4088        pci_set_drvdata(pdev, mgp);
4089        if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
4090                myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
4091        if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
4092                myri10ge_initial_mtu = 68;
4093
4094        netdev->netdev_ops = &myri10ge_netdev_ops;
4095        netdev->mtu = myri10ge_initial_mtu;
4096        netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
4097
4098        /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
4099        netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
4100
4101        netdev->features = netdev->hw_features;
4102
4103        if (dac_enabled)
4104                netdev->features |= NETIF_F_HIGHDMA;
4105
4106        netdev->vlan_features |= mgp->features;
4107        if (mgp->fw_ver_tiny < 37)
4108                netdev->vlan_features &= ~NETIF_F_TSO6;
4109        if (mgp->fw_ver_tiny < 32)
4110                netdev->vlan_features &= ~NETIF_F_TSO;
4111
4112        /* make sure we can get an irq, and that MSI can be
4113         * setup (if available). */
4114        status = myri10ge_request_irq(mgp);
4115        if (status != 0)
4116                goto abort_with_firmware;
4117        myri10ge_free_irq(mgp);
4118
4119        /* Save configuration space to be restored if the
4120         * nic resets due to a parity error */
4121        pci_save_state(pdev);
4122
4123        /* Setup the watchdog timer */
4124        setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
4125                    (unsigned long)mgp);
4126
4127        netdev->ethtool_ops = &myri10ge_ethtool_ops;
4128        INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
4129        status = register_netdev(netdev);
4130        if (status != 0) {
4131                dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
4132                goto abort_with_state;
4133        }
4134        if (mgp->msix_enabled)
4135                dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
4136                         mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
4137                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
4138        else
4139                dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
4140                         mgp->msi_enabled ? "MSI" : "xPIC",
4141                         pdev->irq, mgp->tx_boundary, mgp->fw_name,
4142                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
4143
4144        board_number++;
4145        return 0;
4146
4147abort_with_state:
4148        pci_restore_state(pdev);
4149
4150abort_with_slices:
4151        myri10ge_free_slices(mgp);
4152
4153abort_with_firmware:
4154        myri10ge_dummy_rdma(mgp, 0);
4155
4156abort_with_ioremap:
4157        if (mgp->mac_addr_string != NULL)
4158                dev_err(&pdev->dev,
4159                        "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
4160                        mgp->mac_addr_string, mgp->serial_number);
4161        iounmap(mgp->sram);
4162
4163abort_with_mtrr:
4164        arch_phys_wc_del(mgp->wc_cookie);
4165        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4166                          mgp->cmd, mgp->cmd_bus);
4167
4168abort_with_enabled:
4169        pci_disable_device(pdev);
4170
4171abort_with_netdev:
4172        set_fw_name(mgp, NULL, false);
4173        free_netdev(netdev);
4174        return status;
4175}
4176
4177/*
4178 * myri10ge_remove
4179 *
4180 * Does what is necessary to shutdown one Myrinet device. Called
4181 *   once for each Myrinet card by the kernel when a module is
4182 *   unloaded.
4183 */
4184static void myri10ge_remove(struct pci_dev *pdev)
4185{
4186        struct myri10ge_priv *mgp;
4187        struct net_device *netdev;
4188
4189        mgp = pci_get_drvdata(pdev);
4190        if (mgp == NULL)
4191                return;
4192
4193        cancel_work_sync(&mgp->watchdog_work);
4194        netdev = mgp->dev;
4195        unregister_netdev(netdev);
4196
4197#ifdef CONFIG_MYRI10GE_DCA
4198        myri10ge_teardown_dca(mgp);
4199#endif
4200        myri10ge_dummy_rdma(mgp, 0);
4201
4202        /* avoid a memory leak */
4203        pci_restore_state(pdev);
4204
4205        iounmap(mgp->sram);
4206        arch_phys_wc_del(mgp->wc_cookie);
4207        myri10ge_free_slices(mgp);
4208        kfree(mgp->msix_vectors);
4209        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4210                          mgp->cmd, mgp->cmd_bus);
4211
4212        set_fw_name(mgp, NULL, false);
4213        free_netdev(netdev);
4214        pci_disable_device(pdev);
4215}
4216
4217#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
4218#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
4219
4220static const struct pci_device_id myri10ge_pci_tbl[] = {
4221        {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4222        {PCI_DEVICE
4223         (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4224        {0},
4225};
4226
4227MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4228
4229static struct pci_driver myri10ge_driver = {
4230        .name = "myri10ge",
4231        .probe = myri10ge_probe,
4232        .remove = myri10ge_remove,
4233        .id_table = myri10ge_pci_tbl,
4234#ifdef CONFIG_PM
4235        .suspend = myri10ge_suspend,
4236        .resume = myri10ge_resume,
4237#endif
4238};
4239
4240#ifdef CONFIG_MYRI10GE_DCA
4241static int
4242myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4243{
4244        int err = driver_for_each_device(&myri10ge_driver.driver,
4245                                         NULL, &event,
4246                                         myri10ge_notify_dca_device);
4247
4248        if (err)
4249                return NOTIFY_BAD;
4250        return NOTIFY_DONE;
4251}
4252
4253static struct notifier_block myri10ge_dca_notifier = {
4254        .notifier_call = myri10ge_notify_dca,
4255        .next = NULL,
4256        .priority = 0,
4257};
4258#endif                          /* CONFIG_MYRI10GE_DCA */
4259
4260static __init int myri10ge_init_module(void)
4261{
4262        pr_info("Version %s\n", MYRI10GE_VERSION_STR);
4263
4264        if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4265                pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4266                       myri10ge_rss_hash);
4267                myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4268        }
4269#ifdef CONFIG_MYRI10GE_DCA
4270        dca_register_notify(&myri10ge_dca_notifier);
4271#endif
4272        if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4273                myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4274
4275        return pci_register_driver(&myri10ge_driver);
4276}
4277
4278module_init(myri10ge_init_module);
4279
4280static __exit void myri10ge_cleanup_module(void)
4281{
4282#ifdef CONFIG_MYRI10GE_DCA
4283        dca_unregister_notify(&myri10ge_dca_notifier);
4284#endif
4285        pci_unregister_driver(&myri10ge_driver);
4286}
4287
4288module_exit(myri10ge_cleanup_module);
4289