/*
 * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>

#include "wil6210.h"
#include "txrx.h"
#include "wmi.h"
#include "boot_loader.h"

bool debug_fw; /* = false; */
module_param(debug_fw, bool, S_IRUGO);
MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug");

bool no_fw_recovery;
module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(no_fw_recovery, " disable automatic FW error recovery");

/* if not set via modparam, will be set to default value of 1/8 of
 * rx ring size during init flow
 */
unsigned short rx_ring_overflow_thrsh = WIL6210_RX_HIGH_TRSH_INIT;
module_param(rx_ring_overflow_thrsh, ushort, S_IRUGO);
MODULE_PARM_DESC(rx_ring_overflow_thrsh,
                 " RX ring overflow threshold in descriptors.");

/* We allow allocation of more than 1 page buffers to support large packets.
 * It is suboptimal behavior performance wise in case MTU above page size.
 */
unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - WIL_MAX_MPDU_OVERHEAD;
static int mtu_max_set(const char *val, const struct kernel_param *kp)
{
        int ret;

        /* sets mtu_max directly. no need to restore it in case of
         * illegal value since we assume this will fail insmod
         */
        ret = param_set_uint(val, kp);
        if (ret)
                return ret;

        if (mtu_max < 68 || mtu_max > WIL_MAX_ETH_MTU)
                ret = -EINVAL;

        return ret;
}

static const struct kernel_param_ops mtu_max_ops = {
        .set = mtu_max_set,
        .get = param_get_uint,
};

module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, S_IRUGO);
MODULE_PARM_DESC(mtu_max, " Max MTU value.");

static uint rx_ring_order = WIL_RX_RING_SIZE_ORDER_DEFAULT;
static uint tx_ring_order = WIL_TX_RING_SIZE_ORDER_DEFAULT;
static uint bcast_ring_order = WIL_BCAST_RING_SIZE_ORDER_DEFAULT;

static int ring_order_set(const char *val, const struct kernel_param *kp)
{
        int ret;
        uint x;

        ret = kstrtouint(val, 0, &x);
        if (ret)
                return ret;

        if ((x < WIL_RING_SIZE_ORDER_MIN) || (x > WIL_RING_SIZE_ORDER_MAX))
                return -EINVAL;

        *((uint *)kp->arg) = x;

        return 0;
}

static const struct kernel_param_ops ring_order_ops = {
        .set = ring_order_set,
        .get = param_get_uint,
};

module_param_cb(rx_ring_order, &ring_order_ops, &rx_ring_order, S_IRUGO);
MODULE_PARM_DESC(rx_ring_order, " Rx ring order; size = 1 << order");
module_param_cb(tx_ring_order, &ring_order_ops, &tx_ring_order, S_IRUGO);
MODULE_PARM_DESC(tx_ring_order, " Tx ring order; size = 1 << order");
module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, S_IRUGO);
MODULE_PARM_DESC(bcast_ring_order, " Bcast ring order; size = 1 << order");

#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
#define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */

/*
 * Due to a hardware issue,
 * one has to read/write to/from NIC in 32-bit chunks;
 * regular memcpy_fromio and siblings will
 * not work on 64-bit platform - it uses 64-bit transactions
 *
 * Force 32-bit transactions to enable NIC on 64-bit platforms
 *
 * To avoid byte swap on big endian host, __raw_{read|write}l
 * should be used - {read|write}l would swap bytes to provide
 * little endian on PCI value in host endianness.
 */
void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
                          size_t count)
{
        u32 *d = dst;
        const volatile u32 __iomem *s = src;

        /* size_t is unsigned, if (count%4 != 0) it will wrap */
        for (count += 4; count > 4; count -= 4)
                *d++ = __raw_readl(s++);
}

void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
                        size_t count)
{
        volatile u32 __iomem *d = dst;
        const u32 *s = src;

        for (count += 4; count > 4; count -= 4)
                __raw_writel(*s++, d++);
}

static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
                               u16 reason_code, bool from_event)
__acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
{
        uint i;
        struct net_device *ndev = wil_to_ndev(wil);
        struct wireless_dev *wdev = wil->wdev;
        struct wil_sta_info *sta = &wil->sta[cid];

        might_sleep();
        wil_dbg_misc(wil, "%s(CID %d, status %d)\n", __func__, cid,
                     sta->status);

        if (sta->status != wil_sta_unused) {
                if (!from_event)
                        wmi_disconnect_sta(wil, sta->addr, reason_code, true);

                switch (wdev->iftype) {
                case NL80211_IFTYPE_AP:
                case NL80211_IFTYPE_P2P_GO:
                        /* AP-like interface */
                        cfg80211_del_sta(ndev, sta->addr, GFP_KERNEL);
                        break;
                default:
                        break;
                }
                sta->status = wil_sta_unused;
        }

        for (i = 0; i < WIL_STA_TID_NUM; i++) {
                struct wil_tid_ampdu_rx *r;

                spin_lock_bh(&sta->tid_rx_lock);

                r = sta->tid_rx[i];
                sta->tid_rx[i] = NULL;
                wil_tid_ampdu_rx_free(wil, r);

                spin_unlock_bh(&sta->tid_rx_lock);
        }
        for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
                if (wil->vring2cid_tid[i][0] == cid)
                        wil_vring_fini_tx(wil, i);
        }
        memset(&sta->stats, 0, sizeof(sta->stats));
}

static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
                                u16 reason_code, bool from_event)
{
        int cid = -ENOENT;
        struct net_device *ndev = wil_to_ndev(wil);
        struct wireless_dev *wdev = wil->wdev;

        might_sleep();
        wil_info(wil, "%s(bssid=%pM, reason=%d, ev%s)\n", __func__, bssid,
                 reason_code, from_event ? "+" : "-");

        /* Cases are:
         * - disconnect single STA, still connected
         * - disconnect single STA, already disconnected
         * - disconnect all
         *
         * For "disconnect all", there are 3 options:
         * - bssid == NULL
         * - bssid is broadcast address (ff:ff:ff:ff:ff:ff)
         * - bssid is our MAC address
         */
        if (bssid && !is_broadcast_ether_addr(bssid) &&
            !ether_addr_equal_unaligned(ndev->dev_addr, bssid)) {
                cid = wil_find_cid(wil, bssid);
                wil_dbg_misc(wil, "Disconnect %pM, CID=%d, reason=%d\n",
                             bssid, cid, reason_code);
                if (cid >= 0) /* disconnect 1 peer */
                        wil_disconnect_cid(wil, cid, reason_code, from_event);
        } else { /* all */
                wil_dbg_misc(wil, "Disconnect all\n");
                for (cid = 0; cid < WIL6210_MAX_CID; cid++)
                        wil_disconnect_cid(wil, cid, reason_code, from_event);
        }

        /* link state */
        switch (wdev->iftype) {
        case NL80211_IFTYPE_STATION:
        case NL80211_IFTYPE_P2P_CLIENT:
                wil_bcast_fini(wil);
                netif_tx_stop_all_queues(ndev);
                netif_carrier_off(ndev);

                if (test_bit(wil_status_fwconnected, wil->status)) {
                        clear_bit(wil_status_fwconnected, wil->status);
                        cfg80211_disconnected(ndev, reason_code,
                                              NULL, 0, false, GFP_KERNEL);
                } else if (test_bit(wil_status_fwconnecting, wil->status)) {
                        cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
                                                WLAN_STATUS_UNSPECIFIED_FAILURE,
                                                GFP_KERNEL);
                }
                clear_bit(wil_status_fwconnecting, wil->status);
                break;
        default:
                break;
        }
}

static void wil_disconnect_worker(struct work_struct *work)
{
        struct wil6210_priv *wil = container_of(work,
                        struct wil6210_priv, disconnect_worker);

        mutex_lock(&wil->mutex);
        _wil6210_disconnect(wil, NULL, WLAN_REASON_UNSPECIFIED, false);
        mutex_unlock(&wil->mutex);
}

static void wil_connect_timer_fn(ulong x)
{
        struct wil6210_priv *wil = (void *)x;
        bool q;

        wil_err(wil, "Connect timeout detected, disconnect station\n");

        /* reschedule to thread context - disconnect won't
         * run from atomic context.
         * queue on wmi_wq to prevent race with connect event.
         */
        q = queue_work(wil->wmi_wq, &wil->disconnect_worker);
        wil_dbg_wmi(wil, "queue_work of disconnect_worker -> %d\n", q);
}

static void wil_scan_timer_fn(ulong x)
{
        struct wil6210_priv *wil = (void *)x;

        clear_bit(wil_status_fwready, wil->status);
        wil_err(wil, "Scan timeout detected, start fw error recovery\n");
        wil_fw_error_recovery(wil);
}

static int wil_wait_for_recovery(struct wil6210_priv *wil)
{
        if (wait_event_interruptible(wil->wq, wil->recovery_state !=
                                     fw_recovery_pending)) {
                wil_err(wil, "Interrupt, canceling recovery\n");
                return -ERESTARTSYS;
        }
        if (wil->recovery_state != fw_recovery_running) {
                wil_info(wil, "Recovery cancelled\n");
                return -EINTR;
        }
        wil_info(wil, "Proceed with recovery\n");
        return 0;
}

void wil_set_recovery_state(struct wil6210_priv *wil, int state)
{
        wil_dbg_misc(wil, "%s(%d -> %d)\n", __func__,
                     wil->recovery_state, state);

        wil->recovery_state = state;
        wake_up_interruptible(&wil->wq);
}

static void wil_fw_error_worker(struct work_struct *work)
{
        struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
                                                fw_error_worker);
        struct wireless_dev *wdev = wil->wdev;

        wil_dbg_misc(wil, "fw error worker\n");

        if (!netif_running(wil_to_ndev(wil))) {
                wil_info(wil, "No recovery - interface is down\n");
                return;
        }

        /* increment @recovery_count if less then WIL6210_FW_RECOVERY_TO
         * passed since last recovery attempt
         */
        if (time_is_after_jiffies(wil->last_fw_recovery +
                                  WIL6210_FW_RECOVERY_TO))
                wil->recovery_count++;
        else
                wil->recovery_count = 1; /* fw was alive for a long time */

        if (wil->recovery_count > WIL6210_FW_RECOVERY_RETRIES) {
                wil_err(wil, "too many recovery attempts (%d), giving up\n",
                        wil->recovery_count);
                return;
        }

        wil->last_fw_recovery = jiffies;

        mutex_lock(&wil->mutex);
        switch (wdev->iftype) {
        case NL80211_IFTYPE_STATION:
        case NL80211_IFTYPE_P2P_CLIENT:
        case NL80211_IFTYPE_MONITOR:
                wil_info(wil, "fw error recovery requested (try %d)...\n",
                         wil->recovery_count);
                if (!no_fw_recovery)
                        wil->recovery_state = fw_recovery_running;
                if (0 != wil_wait_for_recovery(wil))
                        break;

                __wil_down(wil);
                __wil_up(wil);
                break;
        case NL80211_IFTYPE_AP:
        case NL80211_IFTYPE_P2P_GO:
                wil_info(wil, "No recovery for AP-like interface\n");
                /* recovery in these modes is done by upper layers */
                break;
        default:
                wil_err(wil, "No recovery - unknown interface type %d\n",
                        wdev->iftype);
                break;
        }
        mutex_unlock(&wil->mutex);
}

static int wil_find_free_vring(struct wil6210_priv *wil)
{
        int i;

        for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
                if (!wil->vring_tx[i].va)
                        return i;
        }
        return -EINVAL;
}

int wil_tx_init(struct wil6210_priv *wil, int cid)
{
        int rc = -EINVAL, ringid;

        if (cid < 0) {
                wil_err(wil, "No connection pending\n");
                goto out;
        }
        ringid = wil_find_free_vring(wil);
        if (ringid < 0) {
                wil_err(wil, "No free vring found\n");
                goto out;
        }

        wil_dbg_wmi(wil, "Configure for connection CID %d vring %d\n",
                    cid, ringid);

        rc = wil_vring_init_tx(wil, ringid, 1 << tx_ring_order, cid, 0);
        if (rc)
                wil_err(wil, "wil_vring_init_tx for CID %d vring %d failed\n",
                        cid, ringid);

out:
        return rc;
}

int wil_bcast_init(struct wil6210_priv *wil)
{
        int ri = wil->bcast_vring, rc;

        if ((ri >= 0) && wil->vring_tx[ri].va)
                return 0;

        ri = wil_find_free_vring(wil);
        if (ri < 0)
                return ri;

        wil->bcast_vring = ri;
        rc = wil_vring_init_bcast(wil, ri, 1 << bcast_ring_order);
        if (rc)
                wil->bcast_vring = -1;

        return rc;
}

void wil_bcast_fini(struct wil6210_priv *wil)
{
        int ri = wil->bcast_vring;

        if (ri < 0)
                return;

        wil->bcast_vring = -1;
        wil_vring_fini_tx(wil, ri);
}

int wil_priv_init(struct wil6210_priv *wil)
{
        uint i;

        wil_dbg_misc(wil, "%s()\n", __func__);

        memset(wil->sta, 0, sizeof(wil->sta));
        for (i = 0; i < WIL6210_MAX_CID; i++)
                spin_lock_init(&wil->sta[i].tid_rx_lock);

        for (i = 0; i < WIL6210_MAX_TX_RINGS; i++)
                spin_lock_init(&wil->vring_tx_data[i].lock);

        mutex_init(&wil->mutex);
        mutex_init(&wil->wmi_mutex);
        mutex_init(&wil->back_rx_mutex);
        mutex_init(&wil->back_tx_mutex);
        mutex_init(&wil->probe_client_mutex);

        init_completion(&wil->wmi_ready);
        init_completion(&wil->wmi_call);

        wil->bcast_vring = -1;
        setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
        setup_timer(&wil->scan_timer, wil_scan_timer_fn, (ulong)wil);

        INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
        INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
        INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
        INIT_WORK(&wil->back_rx_worker, wil_back_rx_worker);
        INIT_WORK(&wil->back_tx_worker, wil_back_tx_worker);
        INIT_WORK(&wil->probe_client_worker, wil_probe_client_worker);

        INIT_LIST_HEAD(&wil->pending_wmi_ev);
        INIT_LIST_HEAD(&wil->back_rx_pending);
        INIT_LIST_HEAD(&wil->back_tx_pending);
        INIT_LIST_HEAD(&wil->probe_client_pending);
        spin_lock_init(&wil->wmi_ev_lock);
        init_waitqueue_head(&wil->wq);

        wil->wmi_wq = create_singlethread_workqueue(WIL_NAME "_wmi");
        if (!wil->wmi_wq)
                return -EAGAIN;

        wil->wq_service = create_singlethread_workqueue(WIL_NAME "_service");
        if (!wil->wq_service)
                goto out_wmi_wq;

        wil->last_fw_recovery = jiffies;
        wil->tx_interframe_timeout = WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT;
        wil->rx_interframe_timeout = WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT;
        wil->tx_max_burst_duration = WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT;
        wil->rx_max_burst_duration = WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT;

        if (rx_ring_overflow_thrsh == WIL6210_RX_HIGH_TRSH_INIT)
                rx_ring_overflow_thrsh = WIL6210_RX_HIGH_TRSH_DEFAULT;
        return 0;

out_wmi_wq:
        destroy_workqueue(wil->wmi_wq);

        return -EAGAIN;
}

/**
 * wil6210_disconnect - disconnect one connection
 * @wil: driver context
 * @bssid: peer to disconnect, NULL to disconnect all
 * @reason_code: Reason code for the Disassociation frame
 * @from_event: whether is invoked from FW event handler
 *
 * Disconnect and release associated resources. If invoked not from the
 * FW event handler, issue WMI command(s) to trigger MAC disconnect.
 */
void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
                        u16 reason_code, bool from_event)
{
        wil_dbg_misc(wil, "%s()\n", __func__);

        del_timer_sync(&wil->connect_timer);
        _wil6210_disconnect(wil, bssid, reason_code, from_event);
}

void wil_priv_deinit(struct wil6210_priv *wil)
{
        wil_dbg_misc(wil, "%s()\n", __func__);

        wil_set_recovery_state(wil, fw_recovery_idle);
        del_timer_sync(&wil->scan_timer);
        cancel_work_sync(&wil->disconnect_worker);
        cancel_work_sync(&wil->fw_error_worker);
        mutex_lock(&wil->mutex);
        wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
        mutex_unlock(&wil->mutex);
        wmi_event_flush(wil);
        wil_back_rx_flush(wil);
        cancel_work_sync(&wil->back_rx_worker);
        wil_back_tx_flush(wil);
        cancel_work_sync(&wil->back_tx_worker);
        wil_probe_client_flush(wil);
        cancel_work_sync(&wil->probe_client_worker);
        destroy_workqueue(wil->wq_service);
        destroy_workqueue(wil->wmi_wq);
}

static inline void wil_halt_cpu(struct wil6210_priv *wil)
{
        wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
        wil_w(wil, RGF_USER_MAC_CPU_0,  BIT_USER_MAC_CPU_MAN_RST);
}

static inline void wil_release_cpu(struct wil6210_priv *wil)
{
        /* Start CPU */
        wil_w(wil, RGF_USER_USER_CPU_0, 1);
}

static int wil_target_reset(struct wil6210_priv *wil)
{
        int delay = 0;
        u32 x, x1 = 0;

        wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name);

        /* Clear MAC link up */
        wil_s(wil, RGF_HP_CTRL, BIT(15));
        wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_HPAL_PERST_FROM_PAD);
        wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_CAR_PERST_RST);

        wil_halt_cpu(wil);

        /* clear all boot loader "ready" bits */
        wil_w(wil, RGF_USER_BL +
              offsetof(struct bl_dedicated_registers_v0, boot_loader_ready), 0);
        /* Clear Fw Download notification */
        wil_c(wil, RGF_USER_USAGE_6, BIT(0));

        wil_s(wil, RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN);
        /* XTAL stabilization should take about 3ms */
        usleep_range(5000, 7000);
        x = wil_r(wil, RGF_CAF_PLL_LOCK_STATUS);
        if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) {
                wil_err(wil, "Xtal stabilization timeout\n"
                        "RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x);
                return -ETIME;
        }
        /* switch 10k to XTAL*/
        wil_c(wil, RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF);
        /* 40 MHz */
        wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL);

        wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
        wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);

        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00);

        wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
        wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);

        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);

        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003);
        /* reset A2 PCIE AHB */
        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);

        wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);

        /* wait until device ready. typical time is 20..80 msec */
        do {
                msleep(RST_DELAY);
                x = wil_r(wil, RGF_USER_BL +
                          offsetof(struct bl_dedicated_registers_v0,
                                   boot_loader_ready));
                if (x1 != x) {
                        wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n", x1, x);
                        x1 = x;
                }
                if (delay++ > RST_COUNT) {
                        wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
                                x);
                        return -ETIME;
                }
        } while (x != BL_READY);

        wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);

        /* enable fix for HW bug related to the SA/DA swap in AP Rx */
        wil_s(wil, RGF_DMA_OFUL_NID_0, BIT_DMA_OFUL_NID_0_RX_EXT_TR_EN |
              BIT_DMA_OFUL_NID_0_RX_EXT_A3_SRC);

        wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY);
        return 0;
}

void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
{
        le32_to_cpus(&r->base);
        le16_to_cpus(&r->entry_size);
        le16_to_cpus(&r->size);
        le32_to_cpus(&r->tail);
        le32_to_cpus(&r->head);
}

static int wil_get_bl_info(struct wil6210_priv *wil)
{
        struct net_device *ndev = wil_to_ndev(wil);
        union {
                struct bl_dedicated_registers_v0 bl0;
                struct bl_dedicated_registers_v1 bl1;
        } bl;
        u32 bl_ver;
        u8 *mac;
        u16 rf_status;

        wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL),
                             sizeof(bl));
        bl_ver = le32_to_cpu(bl.bl0.boot_loader_struct_version);
        mac = bl.bl0.mac_address;

        if (bl_ver == 0) {
                le32_to_cpus(&bl.bl0.rf_type);
                le32_to_cpus(&bl.bl0.baseband_type);
                rf_status = 0; /* actually, unknown */
                wil_info(wil,
                         "Boot Loader struct v%d: MAC = %pM RF = 0x%08x bband = 0x%08x\n",
                         bl_ver, mac,
                         bl.bl0.rf_type, bl.bl0.baseband_type);
                wil_info(wil, "Boot Loader build unknown for struct v0\n");
        } else {
                le16_to_cpus(&bl.bl1.rf_type);
                rf_status = le16_to_cpu(bl.bl1.rf_status);
                le32_to_cpus(&bl.bl1.baseband_type);
                le16_to_cpus(&bl.bl1.bl_version_subminor);
                le16_to_cpus(&bl.bl1.bl_version_build);
                wil_info(wil,
                         "Boot Loader struct v%d: MAC = %pM RF = 0x%04x (status 0x%04x) bband = 0x%08x\n",
                         bl_ver, mac,
                         bl.bl1.rf_type, rf_status,
                         bl.bl1.baseband_type);
                wil_info(wil, "Boot Loader build %d.%d.%d.%d\n",
                         bl.bl1.bl_version_major, bl.bl1.bl_version_minor,
                         bl.bl1.bl_version_subminor, bl.bl1.bl_version_build);
        }

        if (!is_valid_ether_addr(mac)) {
                wil_err(wil, "BL: Invalid MAC %pM\n", mac);
                return -EINVAL;
        }

        ether_addr_copy(ndev->perm_addr, mac);
        if (!is_valid_ether_addr(ndev->dev_addr))
                ether_addr_copy(ndev->dev_addr, mac);

        if (rf_status) {/* bad RF cable? */
                wil_err(wil, "RF communication error 0x%04x",
                        rf_status);
                return -EAGAIN;
        }

        return 0;
}

static void wil_bl_crash_info(struct wil6210_priv *wil, bool is_err)
{
        u32 bl_assert_code, bl_assert_blink, bl_magic_number;
        u32 bl_ver = wil_r(wil, RGF_USER_BL +
                           offsetof(struct bl_dedicated_registers_v0,
                                    boot_loader_struct_version));

        if (bl_ver < 2)
                return;

        bl_assert_code = wil_r(wil, RGF_USER_BL +
                               offsetof(struct bl_dedicated_registers_v1,
                                        bl_assert_code));
        bl_assert_blink = wil_r(wil, RGF_USER_BL +
                                offsetof(struct bl_dedicated_registers_v1,
                                         bl_assert_blink));
        bl_magic_number = wil_r(wil, RGF_USER_BL +
                                offsetof(struct bl_dedicated_registers_v1,
                                         bl_magic_number));

        if (is_err) {
                wil_err(wil,
                        "BL assert code 0x%08x blink 0x%08x magic 0x%08x\n",
                        bl_assert_code, bl_assert_blink, bl_magic_number);
        } else {
                wil_dbg_misc(wil,
                             "BL assert code 0x%08x blink 0x%08x magic 0x%08x\n",
                             bl_assert_code, bl_assert_blink, bl_magic_number);
        }
}

static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
{
        ulong to = msecs_to_jiffies(1000);
        ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);

        if (0 == left) {
                wil_err(wil, "Firmware not ready\n");
                return -ETIME;
        } else {
                wil_info(wil, "FW ready after %d ms. HW version 0x%08x\n",
                         jiffies_to_msecs(to-left), wil->hw_version);
        }
        return 0;
}

/*
 * We reset all the structures, and we reset the UMAC.
 * After calling this routine, you're expected to reload
 * the firmware.
 */
int wil_reset(struct wil6210_priv *wil, bool load_fw)
{
        int rc;

        wil_dbg_misc(wil, "%s()\n", __func__);

        WARN_ON(!mutex_is_locked(&wil->mutex));
        WARN_ON(test_bit(wil_status_napi_en, wil->status));

        if (debug_fw) {
                static const u8 mac[ETH_ALEN] = {
                        0x00, 0xde, 0xad, 0x12, 0x34, 0x56,
                };
                struct net_device *ndev = wil_to_ndev(wil);

                ether_addr_copy(ndev->perm_addr, mac);
                ether_addr_copy(ndev->dev_addr, ndev->perm_addr);
                return 0;
        }

        if (wil->hw_version == HW_VER_UNKNOWN)
                return -ENODEV;

        set_bit(wil_status_resetting, wil->status);

        cancel_work_sync(&wil->disconnect_worker);
        wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
        wil_bcast_fini(wil);

        /* prevent NAPI from being scheduled and prevent wmi commands */
        mutex_lock(&wil->wmi_mutex);
        bitmap_zero(wil->status, wil_status_last);
        mutex_unlock(&wil->wmi_mutex);

        if (wil->scan_request) {
                wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
                             wil->scan_request);
                del_timer_sync(&wil->scan_timer);
                cfg80211_scan_done(wil->scan_request, true);
                wil->scan_request = NULL;
        }

        wil_mask_irq(wil);

        wmi_event_flush(wil);

        flush_workqueue(wil->wq_service);
        flush_workqueue(wil->wmi_wq);

        wil_bl_crash_info(wil, false);
        rc = wil_target_reset(wil);
        wil_rx_fini(wil);
        if (rc) {
                wil_bl_crash_info(wil, true);
                return rc;
        }

        rc = wil_get_bl_info(wil);
        if (rc == -EAGAIN && !load_fw) /* ignore RF error if not going up */
                rc = 0;
        if (rc)
                return rc;

        if (load_fw) {
                wil_info(wil, "Use firmware <%s> + board <%s>\n", WIL_FW_NAME,
                         WIL_FW2_NAME);

                wil_halt_cpu(wil);
                /* Loading f/w from the file */
                rc = wil_request_firmware(wil, WIL_FW_NAME);
                if (rc)
                        return rc;
                rc = wil_request_firmware(wil, WIL_FW2_NAME);
                if (rc)
                        return rc;

                /* Mark FW as loaded from host */
                wil_s(wil, RGF_USER_USAGE_6, 1);

                /* clear any interrupts which on-card-firmware
                 * may have set
                 */
                wil6210_clear_irq(wil);
                /* CAF_ICR - clear and mask */
                /* it is W1C, clear by writing back same value */
                wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
                wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);

                wil_release_cpu(wil);
        }

        /* init after reset */
        wil->ap_isolate = 0;
        reinit_completion(&wil->wmi_ready);
        reinit_completion(&wil->wmi_call);

        if (load_fw) {
                wil_configure_interrupt_moderation(wil);
                wil_unmask_irq(wil);

                /* we just started MAC, wait for FW ready */
                rc = wil_wait_for_fw_ready(wil);
                if (rc == 0) /* check FW is responsive */
                        rc = wmi_echo(wil);
        }

        return rc;
}

void wil_fw_error_recovery(struct wil6210_priv *wil)
{
        wil_dbg_misc(wil, "starting fw error recovery\n");

        if (test_bit(wil_status_resetting, wil->status)) {
                wil_info(wil, "Reset already in progress\n");
                return;
        }

        wil->recovery_state = fw_recovery_pending;
        schedule_work(&wil->fw_error_worker);
}

int __wil_up(struct wil6210_priv *wil)
{
        struct net_device *ndev = wil_to_ndev(wil);
        struct wireless_dev *wdev = wil->wdev;
        int rc;

        WARN_ON(!mutex_is_locked(&wil->mutex));

        rc = wil_reset(wil, true);
        if (rc)
                return rc;

        /* Rx VRING. After MAC and beacon */
        rc = wil_rx_init(wil, 1 << rx_ring_order);
        if (rc)
                return rc;

        switch (wdev->iftype) {
        case NL80211_IFTYPE_STATION:
                wil_dbg_misc(wil, "type: STATION\n");
                ndev->type = ARPHRD_ETHER;
                break;
        case NL80211_IFTYPE_AP:
                wil_dbg_misc(wil, "type: AP\n");
                ndev->type = ARPHRD_ETHER;
                break;
        case NL80211_IFTYPE_P2P_CLIENT:
                wil_dbg_misc(wil, "type: P2P_CLIENT\n");
                ndev->type = ARPHRD_ETHER;
                break;
        case NL80211_IFTYPE_P2P_GO:
                wil_dbg_misc(wil, "type: P2P_GO\n");
                ndev->type = ARPHRD_ETHER;
                break;
        case NL80211_IFTYPE_MONITOR:
                wil_dbg_misc(wil, "type: Monitor\n");
                ndev->type = ARPHRD_IEEE80211_RADIOTAP;
                /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
                break;
        default:
                return -EOPNOTSUPP;
        }

        /* MAC address - pre-requisite for other commands */
        wmi_set_mac_address(wil, ndev->dev_addr);

        wil_dbg_misc(wil, "NAPI enable\n");
        napi_enable(&wil->napi_rx);
        napi_enable(&wil->napi_tx);
        set_bit(wil_status_napi_en, wil->status);

        if (wil->platform_ops.bus_request)
                wil->platform_ops.bus_request(wil->platform_handle,
                                              WIL_MAX_BUS_REQUEST_KBPS);

        return 0;
}

int wil_up(struct wil6210_priv *wil)
{
        int rc;

        wil_dbg_misc(wil, "%s()\n", __func__);

        mutex_lock(&wil->mutex);
        rc = __wil_up(wil);
        mutex_unlock(&wil->mutex);

        return rc;
}

int __wil_down(struct wil6210_priv *wil)
{
        int rc;

        WARN_ON(!mutex_is_locked(&wil->mutex));

        if (wil->platform_ops.bus_request)
                wil->platform_ops.bus_request(wil->platform_handle, 0);

        wil_disable_irq(wil);
        if (test_and_clear_bit(wil_status_napi_en, wil->status)) {
                napi_disable(&wil->napi_rx);
                napi_disable(&wil->napi_tx);
                wil_dbg_misc(wil, "NAPI disable\n");
        }
        wil_enable_irq(wil);

        if (wil->scan_request) {
                wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
                             wil->scan_request);
                del_timer_sync(&wil->scan_timer);
                cfg80211_scan_done(wil->scan_request, true);
                wil->scan_request = NULL;
        }

        if (test_bit(wil_status_fwconnected, wil->status) ||
            test_bit(wil_status_fwconnecting, wil->status)) {

                mutex_unlock(&wil->mutex);
                rc = wmi_call(wil, WMI_DISCONNECT_CMDID, NULL, 0,
                              WMI_DISCONNECT_EVENTID, NULL, 0,
                              WIL6210_DISCONNECT_TO_MS);
                mutex_lock(&wil->mutex);
                if (rc)
                        wil_err(wil, "timeout waiting for disconnect\n");
        }

        wil_reset(wil, false);

        return 0;
}

int wil_down(struct wil6210_priv *wil)
{
        int rc;

        wil_dbg_misc(wil, "%s()\n", __func__);

        wil_set_recovery_state(wil, fw_recovery_idle);
        mutex_lock(&wil->mutex);
        rc = __wil_down(wil);
        mutex_unlock(&wil->mutex);

        return rc;
}

int wil_find_cid(struct wil6210_priv *wil, const u8 *mac)
{
        int i;
        int rc = -ENOENT;

        for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
                if ((wil->sta[i].status != wil_sta_unused) &&
                    ether_addr_equal(wil->sta[i].addr, mac)) {
                        rc = i;
                        break;
                }
        }

        return rc;
}