linux/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2010 Broadcom Corporation
   3 *
   4 * Permission to use, copy, modify, and/or distribute this software for any
   5 * purpose with or without fee is hereby granted, provided that the above
   6 * copyright notice and this permission notice appear in all copies.
   7 *
   8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15 */
  16
  17#include <linux/kernel.h>
  18#include <linux/string.h>
  19#include <linux/netdevice.h>
  20#include <linux/module.h>
  21#include <brcmu_wifi.h>
  22#include <brcmu_utils.h>
  23#include "core.h"
  24#include "bus.h"
  25#include "debug.h"
  26#include "fwil.h"
  27#include "fwil_types.h"
  28#include "tracepoint.h"
  29#include "common.h"
  30#include "of.h"
  31
  32MODULE_AUTHOR("Broadcom Corporation");
  33MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
  34MODULE_LICENSE("Dual BSD/GPL");
  35
  36const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
  37
  38#define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40
  39#define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40
  40
  41/* boost value for RSSI_DELTA in preferred join selection */
  42#define BRCMF_JOIN_PREF_RSSI_BOOST      8
  43
  44#define BRCMF_DEFAULT_TXGLOM_SIZE       32  /* max tx frames in glom chain */
  45
  46static int brcmf_sdiod_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE;
  47module_param_named(txglomsz, brcmf_sdiod_txglomsz, int, 0);
  48MODULE_PARM_DESC(txglomsz, "Maximum tx packet chain size [SDIO]");
  49
  50/* Debug level configuration. See debug.h for bits, sysfs modifiable */
  51int brcmf_msg_level;
  52module_param_named(debug, brcmf_msg_level, int, S_IRUSR | S_IWUSR);
  53MODULE_PARM_DESC(debug, "Level of debug output");
  54
  55static int brcmf_p2p_enable;
  56module_param_named(p2pon, brcmf_p2p_enable, int, 0);
  57MODULE_PARM_DESC(p2pon, "Enable legacy p2p management functionality");
  58
  59static int brcmf_feature_disable;
  60module_param_named(feature_disable, brcmf_feature_disable, int, 0);
  61MODULE_PARM_DESC(feature_disable, "Disable features");
  62
  63static char brcmf_firmware_path[BRCMF_FW_ALTPATH_LEN];
  64module_param_string(alternative_fw_path, brcmf_firmware_path,
  65                    BRCMF_FW_ALTPATH_LEN, S_IRUSR);
  66MODULE_PARM_DESC(alternative_fw_path, "Alternative firmware path");
  67
  68static int brcmf_fcmode;
  69module_param_named(fcmode, brcmf_fcmode, int, 0);
  70MODULE_PARM_DESC(fcmode, "Mode of firmware signalled flow control");
  71
  72static int brcmf_roamoff;
  73module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR);
  74MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine");
  75
  76#ifdef DEBUG
  77/* always succeed brcmf_bus_start() */
  78static int brcmf_ignore_probe_fail;
  79module_param_named(ignore_probe_fail, brcmf_ignore_probe_fail, int, 0);
  80MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
  81#endif
  82
  83static struct brcmfmac_platform_data *brcmfmac_pdata;
  84struct brcmf_mp_global_t brcmf_mp_global;
  85
  86int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
  87{
  88        s8 eventmask[BRCMF_EVENTING_MASK_LEN];
  89        u8 buf[BRCMF_DCMD_SMLEN];
  90        struct brcmf_join_pref_params join_pref_params[2];
  91        struct brcmf_rev_info_le revinfo;
  92        struct brcmf_rev_info *ri;
  93        char *ptr;
  94        s32 err;
  95
  96        /* retreive mac address */
  97        err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
  98                                       sizeof(ifp->mac_addr));
  99        if (err < 0) {
 100                brcmf_err("Retreiving cur_etheraddr failed, %d\n", err);
 101                goto done;
 102        }
 103        memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));
 104
 105        err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO,
 106                                     &revinfo, sizeof(revinfo));
 107        ri = &ifp->drvr->revinfo;
 108        if (err < 0) {
 109                brcmf_err("retrieving revision info failed, %d\n", err);
 110        } else {
 111                ri->vendorid = le32_to_cpu(revinfo.vendorid);
 112                ri->deviceid = le32_to_cpu(revinfo.deviceid);
 113                ri->radiorev = le32_to_cpu(revinfo.radiorev);
 114                ri->chiprev = le32_to_cpu(revinfo.chiprev);
 115                ri->corerev = le32_to_cpu(revinfo.corerev);
 116                ri->boardid = le32_to_cpu(revinfo.boardid);
 117                ri->boardvendor = le32_to_cpu(revinfo.boardvendor);
 118                ri->boardrev = le32_to_cpu(revinfo.boardrev);
 119                ri->driverrev = le32_to_cpu(revinfo.driverrev);
 120                ri->ucoderev = le32_to_cpu(revinfo.ucoderev);
 121                ri->bus = le32_to_cpu(revinfo.bus);
 122                ri->chipnum = le32_to_cpu(revinfo.chipnum);
 123                ri->phytype = le32_to_cpu(revinfo.phytype);
 124                ri->phyrev = le32_to_cpu(revinfo.phyrev);
 125                ri->anarev = le32_to_cpu(revinfo.anarev);
 126                ri->chippkg = le32_to_cpu(revinfo.chippkg);
 127                ri->nvramrev = le32_to_cpu(revinfo.nvramrev);
 128        }
 129        ri->result = err;
 130
 131        /* query for 'ver' to get version info from firmware */
 132        memset(buf, 0, sizeof(buf));
 133        strcpy(buf, "ver");
 134        err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
 135        if (err < 0) {
 136                brcmf_err("Retreiving version information failed, %d\n",
 137                          err);
 138                goto done;
 139        }
 140        ptr = (char *)buf;
 141        strsep(&ptr, "\n");
 142
 143        /* Print fw version info */
 144        brcmf_err("Firmware version = %s\n", buf);
 145
 146        /* locate firmware version number for ethtool */
 147        ptr = strrchr(buf, ' ') + 1;
 148        strlcpy(ifp->drvr->fwver, ptr, sizeof(ifp->drvr->fwver));
 149
 150        /* set mpc */
 151        err = brcmf_fil_iovar_int_set(ifp, "mpc", 1);
 152        if (err) {
 153                brcmf_err("failed setting mpc\n");
 154                goto done;
 155        }
 156
 157        /* Setup join_pref to select target by RSSI(with boost on 5GHz) */
 158        join_pref_params[0].type = BRCMF_JOIN_PREF_RSSI_DELTA;
 159        join_pref_params[0].len = 2;
 160        join_pref_params[0].rssi_gain = BRCMF_JOIN_PREF_RSSI_BOOST;
 161        join_pref_params[0].band = WLC_BAND_5G;
 162        join_pref_params[1].type = BRCMF_JOIN_PREF_RSSI;
 163        join_pref_params[1].len = 2;
 164        join_pref_params[1].rssi_gain = 0;
 165        join_pref_params[1].band = 0;
 166        err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params,
 167                                       sizeof(join_pref_params));
 168        if (err)
 169                brcmf_err("Set join_pref error (%d)\n", err);
 170
 171        /* Setup event_msgs, enable E_IF */
 172        err = brcmf_fil_iovar_data_get(ifp, "event_msgs", eventmask,
 173                                       BRCMF_EVENTING_MASK_LEN);
 174        if (err) {
 175                brcmf_err("Get event_msgs error (%d)\n", err);
 176                goto done;
 177        }
 178        setbit(eventmask, BRCMF_E_IF);
 179        err = brcmf_fil_iovar_data_set(ifp, "event_msgs", eventmask,
 180                                       BRCMF_EVENTING_MASK_LEN);
 181        if (err) {
 182                brcmf_err("Set event_msgs error (%d)\n", err);
 183                goto done;
 184        }
 185
 186        /* Setup default scan channel time */
 187        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
 188                                    BRCMF_DEFAULT_SCAN_CHANNEL_TIME);
 189        if (err) {
 190                brcmf_err("BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n",
 191                          err);
 192                goto done;
 193        }
 194
 195        /* Setup default scan unassoc time */
 196        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
 197                                    BRCMF_DEFAULT_SCAN_UNASSOC_TIME);
 198        if (err) {
 199                brcmf_err("BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n",
 200                          err);
 201                goto done;
 202        }
 203
 204        /* Enable tx beamforming, errors can be ignored (not supported) */
 205        (void)brcmf_fil_iovar_int_set(ifp, "txbf", 1);
 206
 207        /* do bus specific preinit here */
 208        err = brcmf_bus_preinit(ifp->drvr->bus_if);
 209done:
 210        return err;
 211}
 212
 213#if defined(CONFIG_BRCM_TRACING) || defined(CONFIG_BRCMDBG)
 214void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...)
 215{
 216        struct va_format vaf = {
 217                .fmt = fmt,
 218        };
 219        va_list args;
 220
 221        va_start(args, fmt);
 222        vaf.va = &args;
 223        if (brcmf_msg_level & level)
 224                pr_debug("%s %pV", func, &vaf);
 225        trace_brcmf_dbg(level, func, &vaf);
 226        va_end(args);
 227}
 228#endif
 229
 230static void brcmf_mp_attach(void)
 231{
 232        /* If module param firmware path is set then this will always be used,
 233         * if not set then if available use the platform data version. To make
 234         * sure it gets initialized at all, always copy the module param version
 235         */
 236        strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
 237                BRCMF_FW_ALTPATH_LEN);
 238        if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) &&
 239            (brcmf_mp_global.firmware_path[0] == '\0')) {
 240                strlcpy(brcmf_mp_global.firmware_path,
 241                        brcmfmac_pdata->fw_alternative_path,
 242                        BRCMF_FW_ALTPATH_LEN);
 243        }
 244}
 245
 246struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
 247                                               enum brcmf_bus_type bus_type,
 248                                               u32 chip, u32 chiprev)
 249{
 250        struct brcmf_mp_device *settings;
 251        struct brcmfmac_pd_device *device_pd;
 252        bool found;
 253        int i;
 254
 255        brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip,
 256                  chiprev);
 257        settings = kzalloc(sizeof(*settings), GFP_ATOMIC);
 258        if (!settings)
 259                return NULL;
 260
 261        /* start by using the module paramaters */
 262        settings->p2p_enable = !!brcmf_p2p_enable;
 263        settings->feature_disable = brcmf_feature_disable;
 264        settings->fcmode = brcmf_fcmode;
 265        settings->roamoff = !!brcmf_roamoff;
 266#ifdef DEBUG
 267        settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
 268#endif
 269
 270        if (bus_type == BRCMF_BUSTYPE_SDIO)
 271                settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz;
 272
 273        /* See if there is any device specific platform data configured */
 274        found = false;
 275        if (brcmfmac_pdata) {
 276                for (i = 0; i < brcmfmac_pdata->device_count; i++) {
 277                        device_pd = &brcmfmac_pdata->devices[i];
 278                        if ((device_pd->bus_type == bus_type) &&
 279                            (device_pd->id == chip) &&
 280                            ((device_pd->rev == chiprev) ||
 281                             (device_pd->rev == -1))) {
 282                                brcmf_dbg(INFO, "Platform data for device found\n");
 283                                settings->country_codes =
 284                                                device_pd->country_codes;
 285                                if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
 286                                        memcpy(&settings->bus.sdio,
 287                                               &device_pd->bus.sdio,
 288                                               sizeof(settings->bus.sdio));
 289                                found = true;
 290                                break;
 291                        }
 292                }
 293        }
 294        if ((bus_type == BRCMF_BUSTYPE_SDIO) && (!found)) {
 295                /* No platform data for this device. In case of SDIO try OF
 296                 * (Open Firwmare) Device Tree.
 297                 */
 298                brcmf_of_probe(dev, &settings->bus.sdio);
 299        }
 300        return settings;
 301}
 302
 303void brcmf_release_module_param(struct brcmf_mp_device *module_param)
 304{
 305        kfree(module_param);
 306}
 307
 308static int __init brcmf_common_pd_probe(struct platform_device *pdev)
 309{
 310        brcmf_dbg(INFO, "Enter\n");
 311
 312        brcmfmac_pdata = dev_get_platdata(&pdev->dev);
 313
 314        if (brcmfmac_pdata->power_on)
 315                brcmfmac_pdata->power_on();
 316
 317        return 0;
 318}
 319
 320static int brcmf_common_pd_remove(struct platform_device *pdev)
 321{
 322        brcmf_dbg(INFO, "Enter\n");
 323
 324        if (brcmfmac_pdata->power_off)
 325                brcmfmac_pdata->power_off();
 326
 327        return 0;
 328}
 329
 330static struct platform_driver brcmf_pd = {
 331        .remove         = brcmf_common_pd_remove,
 332        .driver         = {
 333                .name   = BRCMFMAC_PDATA_NAME,
 334        }
 335};
 336
 337static int __init brcmfmac_module_init(void)
 338{
 339        int err;
 340
 341        /* Initialize debug system first */
 342        brcmf_debugfs_init();
 343
 344        /* Get the platform data (if available) for our devices */
 345        err = platform_driver_probe(&brcmf_pd, brcmf_common_pd_probe);
 346        if (err == -ENODEV)
 347                brcmf_dbg(INFO, "No platform data available.\n");
 348
 349        /* Initialize global module paramaters */
 350        brcmf_mp_attach();
 351
 352        /* Continue the initialization by registering the different busses */
 353        err = brcmf_core_init();
 354        if (err) {
 355                brcmf_debugfs_exit();
 356                if (brcmfmac_pdata)
 357                        platform_driver_unregister(&brcmf_pd);
 358        }
 359
 360        return err;
 361}
 362
 363static void __exit brcmfmac_module_exit(void)
 364{
 365        brcmf_core_exit();
 366        if (brcmfmac_pdata)
 367                platform_driver_unregister(&brcmf_pd);
 368        brcmf_debugfs_exit();
 369}
 370
 371module_init(brcmfmac_module_init);
 372module_exit(brcmfmac_module_exit);
 373
 374