linux/drivers/net/wireless/st/cw1200/cw1200_spi.c
<<
>>
Prefs
   1/*
   2 * Mac80211 SPI driver for ST-Ericsson CW1200 device
   3 *
   4 * Copyright (c) 2011, Sagrad Inc.
   5 * Author:  Solomon Peachy <speachy@sagrad.com>
   6 *
   7 * Based on cw1200_sdio.c
   8 * Copyright (c) 2010, ST-Ericsson
   9 * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License version 2 as
  13 * published by the Free Software Foundation.
  14 */
  15
  16#include <linux/module.h>
  17#include <linux/gpio.h>
  18#include <linux/delay.h>
  19#include <linux/spinlock.h>
  20#include <linux/interrupt.h>
  21#include <net/mac80211.h>
  22
  23#include <linux/spi/spi.h>
  24#include <linux/device.h>
  25
  26#include "cw1200.h"
  27#include "hwbus.h"
  28#include <linux/platform_data/net-cw1200.h>
  29#include "hwio.h"
  30
  31MODULE_AUTHOR("Solomon Peachy <speachy@sagrad.com>");
  32MODULE_DESCRIPTION("mac80211 ST-Ericsson CW1200 SPI driver");
  33MODULE_LICENSE("GPL");
  34MODULE_ALIAS("spi:cw1200_wlan_spi");
  35
  36/* #define SPI_DEBUG */
  37
  38struct hwbus_priv {
  39        struct spi_device       *func;
  40        struct cw1200_common    *core;
  41        const struct cw1200_platform_data_spi *pdata;
  42        spinlock_t              lock; /* Serialize all bus operations */
  43        wait_queue_head_t       wq;
  44        int claimed;
  45};
  46
  47#define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2)
  48#define SET_WRITE 0x7FFF /* usage: and operation */
  49#define SET_READ 0x8000  /* usage: or operation */
  50
  51/* Notes on byte ordering:
  52   LE:  B0 B1 B2 B3
  53   BE:  B3 B2 B1 B0
  54
  55   Hardware expects 32-bit data to be written as 16-bit BE words:
  56
  57   B1 B0 B3 B2
  58*/
  59
  60static int cw1200_spi_memcpy_fromio(struct hwbus_priv *self,
  61                                     unsigned int addr,
  62                                     void *dst, int count)
  63{
  64        int ret, i;
  65        u16 regaddr;
  66        struct spi_message      m;
  67
  68        struct spi_transfer     t_addr = {
  69                .tx_buf         = &regaddr,
  70                .len            = sizeof(regaddr),
  71        };
  72        struct spi_transfer     t_msg = {
  73                .rx_buf         = dst,
  74                .len            = count,
  75        };
  76
  77        regaddr = (SDIO_TO_SPI_ADDR(addr))<<12;
  78        regaddr |= SET_READ;
  79        regaddr |= (count>>1);
  80
  81#ifdef SPI_DEBUG
  82        pr_info("READ : %04d from 0x%02x (%04x)\n", count, addr, regaddr);
  83#endif
  84
  85        /* Header is LE16 */
  86        regaddr = cpu_to_le16(regaddr);
  87
  88        /* We have to byteswap if the SPI bus is limited to 8b operation
  89           or we are running on a Big Endian system
  90        */
  91#if defined(__LITTLE_ENDIAN)
  92        if (self->func->bits_per_word == 8)
  93#endif
  94                regaddr = swab16(regaddr);
  95
  96        spi_message_init(&m);
  97        spi_message_add_tail(&t_addr, &m);
  98        spi_message_add_tail(&t_msg, &m);
  99        ret = spi_sync(self->func, &m);
 100
 101#ifdef SPI_DEBUG
 102        pr_info("READ : ");
 103        for (i = 0; i < t_addr.len; i++)
 104                printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
 105        printk(" : ");
 106        for (i = 0; i < t_msg.len; i++)
 107                printk("%02x ", ((u8 *)t_msg.rx_buf)[i]);
 108        printk("\n");
 109#endif
 110
 111        /* We have to byteswap if the SPI bus is limited to 8b operation
 112           or we are running on a Big Endian system
 113        */
 114#if defined(__LITTLE_ENDIAN)
 115        if (self->func->bits_per_word == 8)
 116#endif
 117        {
 118                uint16_t *buf = (uint16_t *)dst;
 119                for (i = 0; i < ((count + 1) >> 1); i++)
 120                        buf[i] = swab16(buf[i]);
 121        }
 122
 123        return ret;
 124}
 125
 126static int cw1200_spi_memcpy_toio(struct hwbus_priv *self,
 127                                   unsigned int addr,
 128                                   const void *src, int count)
 129{
 130        int rval, i;
 131        u16 regaddr;
 132        struct spi_transfer     t_addr = {
 133                .tx_buf         = &regaddr,
 134                .len            = sizeof(regaddr),
 135        };
 136        struct spi_transfer     t_msg = {
 137                .tx_buf         = src,
 138                .len            = count,
 139        };
 140        struct spi_message      m;
 141
 142        regaddr = (SDIO_TO_SPI_ADDR(addr))<<12;
 143        regaddr &= SET_WRITE;
 144        regaddr |= (count>>1);
 145
 146#ifdef SPI_DEBUG
 147        pr_info("WRITE: %04d  to  0x%02x (%04x)\n", count, addr, regaddr);
 148#endif
 149
 150        /* Header is LE16 */
 151        regaddr = cpu_to_le16(regaddr);
 152
 153        /* We have to byteswap if the SPI bus is limited to 8b operation
 154           or we are running on a Big Endian system
 155        */
 156#if defined(__LITTLE_ENDIAN)
 157        if (self->func->bits_per_word == 8)
 158#endif
 159        {
 160                uint16_t *buf = (uint16_t *)src;
 161                regaddr = swab16(regaddr);
 162                for (i = 0; i < ((count + 1) >> 1); i++)
 163                        buf[i] = swab16(buf[i]);
 164        }
 165
 166#ifdef SPI_DEBUG
 167        pr_info("WRITE: ");
 168        for (i = 0; i < t_addr.len; i++)
 169                printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
 170        printk(" : ");
 171        for (i = 0; i < t_msg.len; i++)
 172                printk("%02x ", ((u8 *)t_msg.tx_buf)[i]);
 173        printk("\n");
 174#endif
 175
 176        spi_message_init(&m);
 177        spi_message_add_tail(&t_addr, &m);
 178        spi_message_add_tail(&t_msg, &m);
 179        rval = spi_sync(self->func, &m);
 180
 181#ifdef SPI_DEBUG
 182        pr_info("WROTE: %d\n", m.actual_length);
 183#endif
 184
 185#if defined(__LITTLE_ENDIAN)
 186        /* We have to byteswap if the SPI bus is limited to 8b operation */
 187        if (self->func->bits_per_word == 8)
 188#endif
 189        {
 190                uint16_t *buf = (uint16_t *)src;
 191                for (i = 0; i < ((count + 1) >> 1); i++)
 192                        buf[i] = swab16(buf[i]);
 193        }
 194        return rval;
 195}
 196
 197static void cw1200_spi_lock(struct hwbus_priv *self)
 198{
 199        unsigned long flags;
 200
 201        DECLARE_WAITQUEUE(wait, current);
 202
 203        might_sleep();
 204
 205        add_wait_queue(&self->wq, &wait);
 206        spin_lock_irqsave(&self->lock, flags);
 207        while (1) {
 208                set_current_state(TASK_UNINTERRUPTIBLE);
 209                if (!self->claimed)
 210                        break;
 211                spin_unlock_irqrestore(&self->lock, flags);
 212                schedule();
 213                spin_lock_irqsave(&self->lock, flags);
 214        }
 215        set_current_state(TASK_RUNNING);
 216        self->claimed = 1;
 217        spin_unlock_irqrestore(&self->lock, flags);
 218        remove_wait_queue(&self->wq, &wait);
 219
 220        return;
 221}
 222
 223static void cw1200_spi_unlock(struct hwbus_priv *self)
 224{
 225        unsigned long flags;
 226
 227        spin_lock_irqsave(&self->lock, flags);
 228        self->claimed = 0;
 229        spin_unlock_irqrestore(&self->lock, flags);
 230        wake_up(&self->wq);
 231
 232        return;
 233}
 234
 235static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id)
 236{
 237        struct hwbus_priv *self = dev_id;
 238
 239        if (self->core) {
 240                cw1200_spi_lock(self);
 241                cw1200_irq_handler(self->core);
 242                cw1200_spi_unlock(self);
 243                return IRQ_HANDLED;
 244        } else {
 245                return IRQ_NONE;
 246        }
 247}
 248
 249static int cw1200_spi_irq_subscribe(struct hwbus_priv *self)
 250{
 251        int ret;
 252
 253        pr_debug("SW IRQ subscribe\n");
 254
 255        ret = request_threaded_irq(self->func->irq, NULL,
 256                                   cw1200_spi_irq_handler,
 257                                   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 258                                   "cw1200_wlan_irq", self);
 259        if (WARN_ON(ret < 0))
 260                goto exit;
 261
 262        ret = enable_irq_wake(self->func->irq);
 263        if (WARN_ON(ret))
 264                goto free_irq;
 265
 266        return 0;
 267
 268free_irq:
 269        free_irq(self->func->irq, self);
 270exit:
 271        return ret;
 272}
 273
 274static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
 275{
 276        int ret = 0;
 277
 278        pr_debug("SW IRQ unsubscribe\n");
 279        disable_irq_wake(self->func->irq);
 280        free_irq(self->func->irq, self);
 281
 282        return ret;
 283}
 284
 285static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
 286{
 287        if (pdata->reset) {
 288                gpio_set_value(pdata->reset, 0);
 289                msleep(30); /* Min is 2 * CLK32K cycles */
 290                gpio_free(pdata->reset);
 291        }
 292
 293        if (pdata->power_ctrl)
 294                pdata->power_ctrl(pdata, false);
 295        if (pdata->clk_ctrl)
 296                pdata->clk_ctrl(pdata, false);
 297
 298        return 0;
 299}
 300
 301static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
 302{
 303        /* Ensure I/Os are pulled low */
 304        if (pdata->reset) {
 305                gpio_request(pdata->reset, "cw1200_wlan_reset");
 306                gpio_direction_output(pdata->reset, 0);
 307        }
 308        if (pdata->powerup) {
 309                gpio_request(pdata->powerup, "cw1200_wlan_powerup");
 310                gpio_direction_output(pdata->powerup, 0);
 311        }
 312        if (pdata->reset || pdata->powerup)
 313                msleep(10); /* Settle time? */
 314
 315        /* Enable 3v3 and 1v8 to hardware */
 316        if (pdata->power_ctrl) {
 317                if (pdata->power_ctrl(pdata, true)) {
 318                        pr_err("power_ctrl() failed!\n");
 319                        return -1;
 320                }
 321        }
 322
 323        /* Enable CLK32K */
 324        if (pdata->clk_ctrl) {
 325                if (pdata->clk_ctrl(pdata, true)) {
 326                        pr_err("clk_ctrl() failed!\n");
 327                        return -1;
 328                }
 329                msleep(10); /* Delay until clock is stable for 2 cycles */
 330        }
 331
 332        /* Enable POWERUP signal */
 333        if (pdata->powerup) {
 334                gpio_set_value(pdata->powerup, 1);
 335                msleep(250); /* or more..? */
 336        }
 337        /* Enable RSTn signal */
 338        if (pdata->reset) {
 339                gpio_set_value(pdata->reset, 1);
 340                msleep(50); /* Or more..? */
 341        }
 342        return 0;
 343}
 344
 345static size_t cw1200_spi_align_size(struct hwbus_priv *self, size_t size)
 346{
 347        return size & 1 ? size + 1 : size;
 348}
 349
 350static int cw1200_spi_pm(struct hwbus_priv *self, bool suspend)
 351{
 352        return irq_set_irq_wake(self->func->irq, suspend);
 353}
 354
 355static struct hwbus_ops cw1200_spi_hwbus_ops = {
 356        .hwbus_memcpy_fromio    = cw1200_spi_memcpy_fromio,
 357        .hwbus_memcpy_toio      = cw1200_spi_memcpy_toio,
 358        .lock                   = cw1200_spi_lock,
 359        .unlock                 = cw1200_spi_unlock,
 360        .align_size             = cw1200_spi_align_size,
 361        .power_mgmt             = cw1200_spi_pm,
 362};
 363
 364/* Probe Function to be called by SPI stack when device is discovered */
 365static int cw1200_spi_probe(struct spi_device *func)
 366{
 367        const struct cw1200_platform_data_spi *plat_data =
 368                dev_get_platdata(&func->dev);
 369        struct hwbus_priv *self;
 370        int status;
 371
 372        /* Sanity check speed */
 373        if (func->max_speed_hz > 52000000)
 374                func->max_speed_hz = 52000000;
 375        if (func->max_speed_hz < 1000000)
 376                func->max_speed_hz = 1000000;
 377
 378        /* Fix up transfer size */
 379        if (plat_data->spi_bits_per_word)
 380                func->bits_per_word = plat_data->spi_bits_per_word;
 381        if (!func->bits_per_word)
 382                func->bits_per_word = 16;
 383
 384        /* And finally.. */
 385        func->mode = SPI_MODE_0;
 386
 387        pr_info("cw1200_wlan_spi: Probe called (CS %d M %d BPW %d CLK %d)\n",
 388                func->chip_select, func->mode, func->bits_per_word,
 389                func->max_speed_hz);
 390
 391        if (cw1200_spi_on(plat_data)) {
 392                pr_err("spi_on() failed!\n");
 393                return -1;
 394        }
 395
 396        if (spi_setup(func)) {
 397                pr_err("spi_setup() failed!\n");
 398                return -1;
 399        }
 400
 401        self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL);
 402        if (!self) {
 403                pr_err("Can't allocate SPI hwbus_priv.");
 404                return -ENOMEM;
 405        }
 406
 407        self->pdata = plat_data;
 408        self->func = func;
 409        spin_lock_init(&self->lock);
 410
 411        spi_set_drvdata(func, self);
 412
 413        init_waitqueue_head(&self->wq);
 414
 415        status = cw1200_spi_irq_subscribe(self);
 416
 417        status = cw1200_core_probe(&cw1200_spi_hwbus_ops,
 418                                   self, &func->dev, &self->core,
 419                                   self->pdata->ref_clk,
 420                                   self->pdata->macaddr,
 421                                   self->pdata->sdd_file,
 422                                   self->pdata->have_5ghz);
 423
 424        if (status) {
 425                cw1200_spi_irq_unsubscribe(self);
 426                cw1200_spi_off(plat_data);
 427        }
 428
 429        return status;
 430}
 431
 432/* Disconnect Function to be called by SPI stack when device is disconnected */
 433static int cw1200_spi_disconnect(struct spi_device *func)
 434{
 435        struct hwbus_priv *self = spi_get_drvdata(func);
 436
 437        if (self) {
 438                cw1200_spi_irq_unsubscribe(self);
 439                if (self->core) {
 440                        cw1200_core_release(self->core);
 441                        self->core = NULL;
 442                }
 443        }
 444        cw1200_spi_off(dev_get_platdata(&func->dev));
 445
 446        return 0;
 447}
 448
 449static int __maybe_unused cw1200_spi_suspend(struct device *dev)
 450{
 451        struct hwbus_priv *self = spi_get_drvdata(to_spi_device(dev));
 452
 453        if (!cw1200_can_suspend(self->core))
 454                return -EAGAIN;
 455
 456        /* XXX notify host that we have to keep CW1200 powered on? */
 457        return 0;
 458}
 459
 460static SIMPLE_DEV_PM_OPS(cw1200_pm_ops, cw1200_spi_suspend, NULL);
 461
 462static struct spi_driver spi_driver = {
 463        .probe          = cw1200_spi_probe,
 464        .remove         = cw1200_spi_disconnect,
 465        .driver = {
 466                .name           = "cw1200_wlan_spi",
 467                .pm             = IS_ENABLED(CONFIG_PM) ? &cw1200_pm_ops : NULL,
 468        },
 469};
 470
 471module_spi_driver(spi_driver);
 472